xref: /openbmc/qemu/hw/ide/cmd646.c (revision 64552b6b)
1 /*
2  * QEMU IDE Emulation: PCI cmd646 support.
3  *
4  * Copyright (c) 2003 Fabrice Bellard
5  * Copyright (c) 2006 Openedhand Ltd.
6  *
7  * Permission is hereby granted, free of charge, to any person obtaining a copy
8  * of this software and associated documentation files (the "Software"), to deal
9  * in the Software without restriction, including without limitation the rights
10  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
11  * copies of the Software, and to permit persons to whom the Software is
12  * furnished to do so, subject to the following conditions:
13  *
14  * The above copyright notice and this permission notice shall be included in
15  * all copies or substantial portions of the Software.
16  *
17  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
18  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
19  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
20  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
21  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
22  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
23  * THE SOFTWARE.
24  */
25 
26 #include "qemu/osdep.h"
27 #include "hw/hw.h"
28 #include "hw/pci/pci.h"
29 #include "qemu/module.h"
30 #include "hw/isa/isa.h"
31 #include "sysemu/sysemu.h"
32 #include "sysemu/dma.h"
33 #include "sysemu/reset.h"
34 
35 #include "hw/ide/pci.h"
36 #include "trace.h"
37 
38 /* CMD646 specific */
39 #define CFR		0x50
40 #define   CFR_INTR_CH0	0x04
41 #define CNTRL		0x51
42 #define   CNTRL_EN_CH0	0x04
43 #define   CNTRL_EN_CH1	0x08
44 #define ARTTIM23	0x57
45 #define    ARTTIM23_INTR_CH1	0x10
46 #define MRDMODE		0x71
47 #define   MRDMODE_INTR_CH0	0x04
48 #define   MRDMODE_INTR_CH1	0x08
49 #define   MRDMODE_BLK_CH0	0x10
50 #define   MRDMODE_BLK_CH1	0x20
51 #define UDIDETCR0	0x73
52 #define UDIDETCR1	0x7B
53 
54 static void cmd646_update_irq(PCIDevice *pd);
55 
56 static void cmd646_update_dma_interrupts(PCIDevice *pd)
57 {
58     /* Sync DMA interrupt status from UDMA interrupt status */
59     if (pd->config[MRDMODE] & MRDMODE_INTR_CH0) {
60         pd->config[CFR] |= CFR_INTR_CH0;
61     } else {
62         pd->config[CFR] &= ~CFR_INTR_CH0;
63     }
64 
65     if (pd->config[MRDMODE] & MRDMODE_INTR_CH1) {
66         pd->config[ARTTIM23] |= ARTTIM23_INTR_CH1;
67     } else {
68         pd->config[ARTTIM23] &= ~ARTTIM23_INTR_CH1;
69     }
70 }
71 
72 static void cmd646_update_udma_interrupts(PCIDevice *pd)
73 {
74     /* Sync UDMA interrupt status from DMA interrupt status */
75     if (pd->config[CFR] & CFR_INTR_CH0) {
76         pd->config[MRDMODE] |= MRDMODE_INTR_CH0;
77     } else {
78         pd->config[MRDMODE] &= ~MRDMODE_INTR_CH0;
79     }
80 
81     if (pd->config[ARTTIM23] & ARTTIM23_INTR_CH1) {
82         pd->config[MRDMODE] |= MRDMODE_INTR_CH1;
83     } else {
84         pd->config[MRDMODE] &= ~MRDMODE_INTR_CH1;
85     }
86 }
87 
88 static uint64_t bmdma_read(void *opaque, hwaddr addr,
89                            unsigned size)
90 {
91     BMDMAState *bm = opaque;
92     PCIDevice *pci_dev = PCI_DEVICE(bm->pci_dev);
93     uint32_t val;
94 
95     if (size != 1) {
96         return ((uint64_t)1 << (size * 8)) - 1;
97     }
98 
99     switch(addr & 3) {
100     case 0:
101         val = bm->cmd;
102         break;
103     case 1:
104         val = pci_dev->config[MRDMODE];
105         break;
106     case 2:
107         val = bm->status;
108         break;
109     case 3:
110         if (bm == &bm->pci_dev->bmdma[0]) {
111             val = pci_dev->config[UDIDETCR0];
112         } else {
113             val = pci_dev->config[UDIDETCR1];
114         }
115         break;
116     default:
117         val = 0xff;
118         break;
119     }
120 
121     trace_bmdma_read_cmd646(addr, val);
122     return val;
123 }
124 
125 static void bmdma_write(void *opaque, hwaddr addr,
126                         uint64_t val, unsigned size)
127 {
128     BMDMAState *bm = opaque;
129     PCIDevice *pci_dev = PCI_DEVICE(bm->pci_dev);
130 
131     if (size != 1) {
132         return;
133     }
134 
135     trace_bmdma_write_cmd646(addr, val);
136     switch(addr & 3) {
137     case 0:
138         bmdma_cmd_writeb(bm, val);
139         break;
140     case 1:
141         pci_dev->config[MRDMODE] =
142             (pci_dev->config[MRDMODE] & ~0x30) | (val & 0x30);
143         cmd646_update_dma_interrupts(pci_dev);
144         cmd646_update_irq(pci_dev);
145         break;
146     case 2:
147         bm->status = (val & 0x60) | (bm->status & 1) | (bm->status & ~val & 0x06);
148         break;
149     case 3:
150         if (bm == &bm->pci_dev->bmdma[0]) {
151             pci_dev->config[UDIDETCR0] = val;
152         } else {
153             pci_dev->config[UDIDETCR1] = val;
154         }
155         break;
156     }
157 }
158 
159 static const MemoryRegionOps cmd646_bmdma_ops = {
160     .read = bmdma_read,
161     .write = bmdma_write,
162 };
163 
164 static void bmdma_setup_bar(PCIIDEState *d)
165 {
166     BMDMAState *bm;
167     int i;
168 
169     memory_region_init(&d->bmdma_bar, OBJECT(d), "cmd646-bmdma", 16);
170     for(i = 0;i < 2; i++) {
171         bm = &d->bmdma[i];
172         memory_region_init_io(&bm->extra_io, OBJECT(d), &cmd646_bmdma_ops, bm,
173                               "cmd646-bmdma-bus", 4);
174         memory_region_add_subregion(&d->bmdma_bar, i * 8, &bm->extra_io);
175         memory_region_init_io(&bm->addr_ioport, OBJECT(d),
176                               &bmdma_addr_ioport_ops, bm,
177                               "cmd646-bmdma-ioport", 4);
178         memory_region_add_subregion(&d->bmdma_bar, i * 8 + 4, &bm->addr_ioport);
179     }
180 }
181 
182 static void cmd646_update_irq(PCIDevice *pd)
183 {
184     int pci_level;
185 
186     pci_level = ((pd->config[MRDMODE] & MRDMODE_INTR_CH0) &&
187                  !(pd->config[MRDMODE] & MRDMODE_BLK_CH0)) ||
188         ((pd->config[MRDMODE] & MRDMODE_INTR_CH1) &&
189          !(pd->config[MRDMODE] & MRDMODE_BLK_CH1));
190     pci_set_irq(pd, pci_level);
191 }
192 
193 /* the PCI irq level is the logical OR of the two channels */
194 static void cmd646_set_irq(void *opaque, int channel, int level)
195 {
196     PCIIDEState *d = opaque;
197     PCIDevice *pd = PCI_DEVICE(d);
198     int irq_mask;
199 
200     irq_mask = MRDMODE_INTR_CH0 << channel;
201     if (level) {
202         pd->config[MRDMODE] |= irq_mask;
203     } else {
204         pd->config[MRDMODE] &= ~irq_mask;
205     }
206     cmd646_update_dma_interrupts(pd);
207     cmd646_update_irq(pd);
208 }
209 
210 static void cmd646_reset(void *opaque)
211 {
212     PCIIDEState *d = opaque;
213     unsigned int i;
214 
215     for (i = 0; i < 2; i++) {
216         ide_bus_reset(&d->bus[i]);
217     }
218 }
219 
220 static uint32_t cmd646_pci_config_read(PCIDevice *d,
221                                        uint32_t address, int len)
222 {
223     return pci_default_read_config(d, address, len);
224 }
225 
226 static void cmd646_pci_config_write(PCIDevice *d, uint32_t addr, uint32_t val,
227                                     int l)
228 {
229     uint32_t i;
230 
231     pci_default_write_config(d, addr, val, l);
232 
233     for (i = addr; i < addr + l; i++) {
234         switch (i) {
235         case CFR:
236         case ARTTIM23:
237             cmd646_update_udma_interrupts(d);
238             break;
239         case MRDMODE:
240             cmd646_update_dma_interrupts(d);
241             break;
242         }
243     }
244 
245     cmd646_update_irq(d);
246 }
247 
248 /* CMD646 PCI IDE controller */
249 static void pci_cmd646_ide_realize(PCIDevice *dev, Error **errp)
250 {
251     PCIIDEState *d = PCI_IDE(dev);
252     uint8_t *pci_conf = dev->config;
253     qemu_irq *irq;
254     int i;
255 
256     pci_conf[PCI_CLASS_PROG] = 0x8f;
257 
258     pci_conf[CNTRL] = CNTRL_EN_CH0; // enable IDE0
259     if (d->secondary) {
260         /* XXX: if not enabled, really disable the seconday IDE controller */
261         pci_conf[CNTRL] |= CNTRL_EN_CH1; /* enable IDE1 */
262     }
263 
264     /* Set write-to-clear interrupt bits */
265     dev->wmask[CFR] = 0x0;
266     dev->w1cmask[CFR] = CFR_INTR_CH0;
267     dev->wmask[ARTTIM23] = 0x0;
268     dev->w1cmask[ARTTIM23] = ARTTIM23_INTR_CH1;
269     dev->wmask[MRDMODE] = 0x0;
270     dev->w1cmask[MRDMODE] = MRDMODE_INTR_CH0 | MRDMODE_INTR_CH1;
271 
272     memory_region_init_io(&d->data_bar[0], OBJECT(d), &pci_ide_data_le_ops,
273                           &d->bus[0], "cmd646-data0", 8);
274     pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_IO, &d->data_bar[0]);
275 
276     memory_region_init_io(&d->cmd_bar[0], OBJECT(d), &pci_ide_cmd_le_ops,
277                           &d->bus[0], "cmd646-cmd0", 4);
278     pci_register_bar(dev, 1, PCI_BASE_ADDRESS_SPACE_IO, &d->cmd_bar[0]);
279 
280     memory_region_init_io(&d->data_bar[1], OBJECT(d), &pci_ide_data_le_ops,
281                           &d->bus[1], "cmd646-data1", 8);
282     pci_register_bar(dev, 2, PCI_BASE_ADDRESS_SPACE_IO, &d->data_bar[1]);
283 
284     memory_region_init_io(&d->cmd_bar[1], OBJECT(d), &pci_ide_cmd_le_ops,
285                           &d->bus[1], "cmd646-cmd1", 4);
286     pci_register_bar(dev, 3, PCI_BASE_ADDRESS_SPACE_IO, &d->cmd_bar[1]);
287 
288     bmdma_setup_bar(d);
289     pci_register_bar(dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &d->bmdma_bar);
290 
291     /* TODO: RST# value should be 0 */
292     pci_conf[PCI_INTERRUPT_PIN] = 0x01; // interrupt on pin 1
293 
294     irq = qemu_allocate_irqs(cmd646_set_irq, d, 2);
295     for (i = 0; i < 2; i++) {
296         ide_bus_new(&d->bus[i], sizeof(d->bus[i]), DEVICE(dev), i, 2);
297         ide_init2(&d->bus[i], irq[i]);
298 
299         bmdma_init(&d->bus[i], &d->bmdma[i], d);
300         d->bmdma[i].bus = &d->bus[i];
301         ide_register_restart_cb(&d->bus[i]);
302     }
303 
304     vmstate_register(DEVICE(dev), 0, &vmstate_ide_pci, d);
305     qemu_register_reset(cmd646_reset, d);
306 }
307 
308 static void pci_cmd646_ide_exitfn(PCIDevice *dev)
309 {
310     PCIIDEState *d = PCI_IDE(dev);
311     unsigned i;
312 
313     for (i = 0; i < 2; ++i) {
314         memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].extra_io);
315         memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].addr_ioport);
316     }
317 }
318 
319 void pci_cmd646_ide_init(PCIBus *bus, DriveInfo **hd_table,
320                          int secondary_ide_enabled)
321 {
322     PCIDevice *dev;
323 
324     dev = pci_create(bus, -1, "cmd646-ide");
325     qdev_prop_set_uint32(&dev->qdev, "secondary", secondary_ide_enabled);
326     qdev_init_nofail(&dev->qdev);
327 
328     pci_ide_create_devs(dev, hd_table);
329 }
330 
331 static Property cmd646_ide_properties[] = {
332     DEFINE_PROP_UINT32("secondary", PCIIDEState, secondary, 0),
333     DEFINE_PROP_END_OF_LIST(),
334 };
335 
336 static void cmd646_ide_class_init(ObjectClass *klass, void *data)
337 {
338     DeviceClass *dc = DEVICE_CLASS(klass);
339     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
340 
341     k->realize = pci_cmd646_ide_realize;
342     k->exit = pci_cmd646_ide_exitfn;
343     k->vendor_id = PCI_VENDOR_ID_CMD;
344     k->device_id = PCI_DEVICE_ID_CMD_646;
345     k->revision = 0x07;
346     k->class_id = PCI_CLASS_STORAGE_IDE;
347     k->config_read = cmd646_pci_config_read;
348     k->config_write = cmd646_pci_config_write;
349     dc->props = cmd646_ide_properties;
350     set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
351 }
352 
353 static const TypeInfo cmd646_ide_info = {
354     .name          = "cmd646-ide",
355     .parent        = TYPE_PCI_IDE,
356     .class_init    = cmd646_ide_class_init,
357 };
358 
359 static void cmd646_ide_register_types(void)
360 {
361     type_register_static(&cmd646_ide_info);
362 }
363 
364 type_init(cmd646_ide_register_types)
365