xref: /openbmc/qemu/hw/ide/cmd646.c (revision 4366e1db)
1 /*
2  * QEMU IDE Emulation: PCI cmd646 support.
3  *
4  * Copyright (c) 2003 Fabrice Bellard
5  * Copyright (c) 2006 Openedhand Ltd.
6  *
7  * Permission is hereby granted, free of charge, to any person obtaining a copy
8  * of this software and associated documentation files (the "Software"), to deal
9  * in the Software without restriction, including without limitation the rights
10  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
11  * copies of the Software, and to permit persons to whom the Software is
12  * furnished to do so, subject to the following conditions:
13  *
14  * The above copyright notice and this permission notice shall be included in
15  * all copies or substantial portions of the Software.
16  *
17  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
18  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
19  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
20  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
21  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
22  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
23  * THE SOFTWARE.
24  */
25 #include "qemu/osdep.h"
26 #include "hw/hw.h"
27 #include "hw/pci/pci.h"
28 #include "hw/isa/isa.h"
29 #include "sysemu/sysemu.h"
30 #include "sysemu/dma.h"
31 
32 #include "hw/ide/pci.h"
33 #include "trace.h"
34 
35 /* CMD646 specific */
36 #define CFR		0x50
37 #define   CFR_INTR_CH0	0x04
38 #define CNTRL		0x51
39 #define   CNTRL_EN_CH0	0x04
40 #define   CNTRL_EN_CH1	0x08
41 #define ARTTIM23	0x57
42 #define    ARTTIM23_INTR_CH1	0x10
43 #define MRDMODE		0x71
44 #define   MRDMODE_INTR_CH0	0x04
45 #define   MRDMODE_INTR_CH1	0x08
46 #define   MRDMODE_BLK_CH0	0x10
47 #define   MRDMODE_BLK_CH1	0x20
48 #define UDIDETCR0	0x73
49 #define UDIDETCR1	0x7B
50 
51 static void cmd646_update_irq(PCIDevice *pd);
52 
53 static void cmd646_update_dma_interrupts(PCIDevice *pd)
54 {
55     /* Sync DMA interrupt status from UDMA interrupt status */
56     if (pd->config[MRDMODE] & MRDMODE_INTR_CH0) {
57         pd->config[CFR] |= CFR_INTR_CH0;
58     } else {
59         pd->config[CFR] &= ~CFR_INTR_CH0;
60     }
61 
62     if (pd->config[MRDMODE] & MRDMODE_INTR_CH1) {
63         pd->config[ARTTIM23] |= ARTTIM23_INTR_CH1;
64     } else {
65         pd->config[ARTTIM23] &= ~ARTTIM23_INTR_CH1;
66     }
67 }
68 
69 static void cmd646_update_udma_interrupts(PCIDevice *pd)
70 {
71     /* Sync UDMA interrupt status from DMA interrupt status */
72     if (pd->config[CFR] & CFR_INTR_CH0) {
73         pd->config[MRDMODE] |= MRDMODE_INTR_CH0;
74     } else {
75         pd->config[MRDMODE] &= ~MRDMODE_INTR_CH0;
76     }
77 
78     if (pd->config[ARTTIM23] & ARTTIM23_INTR_CH1) {
79         pd->config[MRDMODE] |= MRDMODE_INTR_CH1;
80     } else {
81         pd->config[MRDMODE] &= ~MRDMODE_INTR_CH1;
82     }
83 }
84 
85 static uint64_t bmdma_read(void *opaque, hwaddr addr,
86                            unsigned size)
87 {
88     BMDMAState *bm = opaque;
89     PCIDevice *pci_dev = PCI_DEVICE(bm->pci_dev);
90     uint32_t val;
91 
92     if (size != 1) {
93         return ((uint64_t)1 << (size * 8)) - 1;
94     }
95 
96     switch(addr & 3) {
97     case 0:
98         val = bm->cmd;
99         break;
100     case 1:
101         val = pci_dev->config[MRDMODE];
102         break;
103     case 2:
104         val = bm->status;
105         break;
106     case 3:
107         if (bm == &bm->pci_dev->bmdma[0]) {
108             val = pci_dev->config[UDIDETCR0];
109         } else {
110             val = pci_dev->config[UDIDETCR1];
111         }
112         break;
113     default:
114         val = 0xff;
115         break;
116     }
117 
118     trace_bmdma_read_cmd646(addr, val);
119     return val;
120 }
121 
122 static void bmdma_write(void *opaque, hwaddr addr,
123                         uint64_t val, unsigned size)
124 {
125     BMDMAState *bm = opaque;
126     PCIDevice *pci_dev = PCI_DEVICE(bm->pci_dev);
127 
128     if (size != 1) {
129         return;
130     }
131 
132     trace_bmdma_write_cmd646(addr, val);
133     switch(addr & 3) {
134     case 0:
135         bmdma_cmd_writeb(bm, val);
136         break;
137     case 1:
138         pci_dev->config[MRDMODE] =
139             (pci_dev->config[MRDMODE] & ~0x30) | (val & 0x30);
140         cmd646_update_dma_interrupts(pci_dev);
141         cmd646_update_irq(pci_dev);
142         break;
143     case 2:
144         bm->status = (val & 0x60) | (bm->status & 1) | (bm->status & ~val & 0x06);
145         break;
146     case 3:
147         if (bm == &bm->pci_dev->bmdma[0]) {
148             pci_dev->config[UDIDETCR0] = val;
149         } else {
150             pci_dev->config[UDIDETCR1] = val;
151         }
152         break;
153     }
154 }
155 
156 static const MemoryRegionOps cmd646_bmdma_ops = {
157     .read = bmdma_read,
158     .write = bmdma_write,
159 };
160 
161 static void bmdma_setup_bar(PCIIDEState *d)
162 {
163     BMDMAState *bm;
164     int i;
165 
166     memory_region_init(&d->bmdma_bar, OBJECT(d), "cmd646-bmdma", 16);
167     for(i = 0;i < 2; i++) {
168         bm = &d->bmdma[i];
169         memory_region_init_io(&bm->extra_io, OBJECT(d), &cmd646_bmdma_ops, bm,
170                               "cmd646-bmdma-bus", 4);
171         memory_region_add_subregion(&d->bmdma_bar, i * 8, &bm->extra_io);
172         memory_region_init_io(&bm->addr_ioport, OBJECT(d),
173                               &bmdma_addr_ioport_ops, bm,
174                               "cmd646-bmdma-ioport", 4);
175         memory_region_add_subregion(&d->bmdma_bar, i * 8 + 4, &bm->addr_ioport);
176     }
177 }
178 
179 static void cmd646_update_irq(PCIDevice *pd)
180 {
181     int pci_level;
182 
183     pci_level = ((pd->config[MRDMODE] & MRDMODE_INTR_CH0) &&
184                  !(pd->config[MRDMODE] & MRDMODE_BLK_CH0)) ||
185         ((pd->config[MRDMODE] & MRDMODE_INTR_CH1) &&
186          !(pd->config[MRDMODE] & MRDMODE_BLK_CH1));
187     pci_set_irq(pd, pci_level);
188 }
189 
190 /* the PCI irq level is the logical OR of the two channels */
191 static void cmd646_set_irq(void *opaque, int channel, int level)
192 {
193     PCIIDEState *d = opaque;
194     PCIDevice *pd = PCI_DEVICE(d);
195     int irq_mask;
196 
197     irq_mask = MRDMODE_INTR_CH0 << channel;
198     if (level) {
199         pd->config[MRDMODE] |= irq_mask;
200     } else {
201         pd->config[MRDMODE] &= ~irq_mask;
202     }
203     cmd646_update_dma_interrupts(pd);
204     cmd646_update_irq(pd);
205 }
206 
207 static void cmd646_reset(void *opaque)
208 {
209     PCIIDEState *d = opaque;
210     unsigned int i;
211 
212     for (i = 0; i < 2; i++) {
213         ide_bus_reset(&d->bus[i]);
214     }
215 }
216 
217 static uint32_t cmd646_pci_config_read(PCIDevice *d,
218                                        uint32_t address, int len)
219 {
220     return pci_default_read_config(d, address, len);
221 }
222 
223 static void cmd646_pci_config_write(PCIDevice *d, uint32_t addr, uint32_t val,
224                                     int l)
225 {
226     uint32_t i;
227 
228     pci_default_write_config(d, addr, val, l);
229 
230     for (i = addr; i < addr + l; i++) {
231         switch (i) {
232         case CFR:
233         case ARTTIM23:
234             cmd646_update_udma_interrupts(d);
235             break;
236         case MRDMODE:
237             cmd646_update_dma_interrupts(d);
238             break;
239         }
240     }
241 
242     cmd646_update_irq(d);
243 }
244 
245 /* CMD646 PCI IDE controller */
246 static void pci_cmd646_ide_realize(PCIDevice *dev, Error **errp)
247 {
248     PCIIDEState *d = PCI_IDE(dev);
249     uint8_t *pci_conf = dev->config;
250     qemu_irq *irq;
251     int i;
252 
253     pci_conf[PCI_CLASS_PROG] = 0x8f;
254 
255     pci_conf[CNTRL] = CNTRL_EN_CH0; // enable IDE0
256     if (d->secondary) {
257         /* XXX: if not enabled, really disable the seconday IDE controller */
258         pci_conf[CNTRL] |= CNTRL_EN_CH1; /* enable IDE1 */
259     }
260 
261     /* Set write-to-clear interrupt bits */
262     dev->wmask[CFR] = 0x0;
263     dev->w1cmask[CFR] = CFR_INTR_CH0;
264     dev->wmask[ARTTIM23] = 0x0;
265     dev->w1cmask[ARTTIM23] = ARTTIM23_INTR_CH1;
266     dev->wmask[MRDMODE] = 0x0;
267     dev->w1cmask[MRDMODE] = MRDMODE_INTR_CH0 | MRDMODE_INTR_CH1;
268 
269     memory_region_init_io(&d->data_bar[0], OBJECT(d), &pci_ide_data_le_ops,
270                           &d->bus[0], "cmd646-data0", 8);
271     pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_IO, &d->data_bar[0]);
272 
273     memory_region_init_io(&d->cmd_bar[0], OBJECT(d), &pci_ide_cmd_le_ops,
274                           &d->bus[0], "cmd646-cmd0", 4);
275     pci_register_bar(dev, 1, PCI_BASE_ADDRESS_SPACE_IO, &d->cmd_bar[0]);
276 
277     memory_region_init_io(&d->data_bar[1], OBJECT(d), &pci_ide_data_le_ops,
278                           &d->bus[1], "cmd646-data1", 8);
279     pci_register_bar(dev, 2, PCI_BASE_ADDRESS_SPACE_IO, &d->data_bar[1]);
280 
281     memory_region_init_io(&d->cmd_bar[1], OBJECT(d), &pci_ide_cmd_le_ops,
282                           &d->bus[1], "cmd646-cmd1", 4);
283     pci_register_bar(dev, 3, PCI_BASE_ADDRESS_SPACE_IO, &d->cmd_bar[1]);
284 
285     bmdma_setup_bar(d);
286     pci_register_bar(dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &d->bmdma_bar);
287 
288     /* TODO: RST# value should be 0 */
289     pci_conf[PCI_INTERRUPT_PIN] = 0x01; // interrupt on pin 1
290 
291     irq = qemu_allocate_irqs(cmd646_set_irq, d, 2);
292     for (i = 0; i < 2; i++) {
293         ide_bus_new(&d->bus[i], sizeof(d->bus[i]), DEVICE(dev), i, 2);
294         ide_init2(&d->bus[i], irq[i]);
295 
296         bmdma_init(&d->bus[i], &d->bmdma[i], d);
297         d->bmdma[i].bus = &d->bus[i];
298         ide_register_restart_cb(&d->bus[i]);
299     }
300 
301     vmstate_register(DEVICE(dev), 0, &vmstate_ide_pci, d);
302     qemu_register_reset(cmd646_reset, d);
303 }
304 
305 static void pci_cmd646_ide_exitfn(PCIDevice *dev)
306 {
307     PCIIDEState *d = PCI_IDE(dev);
308     unsigned i;
309 
310     for (i = 0; i < 2; ++i) {
311         memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].extra_io);
312         memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].addr_ioport);
313     }
314 }
315 
316 void pci_cmd646_ide_init(PCIBus *bus, DriveInfo **hd_table,
317                          int secondary_ide_enabled)
318 {
319     PCIDevice *dev;
320 
321     dev = pci_create(bus, -1, "cmd646-ide");
322     qdev_prop_set_uint32(&dev->qdev, "secondary", secondary_ide_enabled);
323     qdev_init_nofail(&dev->qdev);
324 
325     pci_ide_create_devs(dev, hd_table);
326 }
327 
328 static Property cmd646_ide_properties[] = {
329     DEFINE_PROP_UINT32("secondary", PCIIDEState, secondary, 0),
330     DEFINE_PROP_END_OF_LIST(),
331 };
332 
333 static void cmd646_ide_class_init(ObjectClass *klass, void *data)
334 {
335     DeviceClass *dc = DEVICE_CLASS(klass);
336     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
337 
338     k->realize = pci_cmd646_ide_realize;
339     k->exit = pci_cmd646_ide_exitfn;
340     k->vendor_id = PCI_VENDOR_ID_CMD;
341     k->device_id = PCI_DEVICE_ID_CMD_646;
342     k->revision = 0x07;
343     k->class_id = PCI_CLASS_STORAGE_IDE;
344     k->config_read = cmd646_pci_config_read;
345     k->config_write = cmd646_pci_config_write;
346     dc->props = cmd646_ide_properties;
347     set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
348 }
349 
350 static const TypeInfo cmd646_ide_info = {
351     .name          = "cmd646-ide",
352     .parent        = TYPE_PCI_IDE,
353     .class_init    = cmd646_ide_class_init,
354 };
355 
356 static void cmd646_ide_register_types(void)
357 {
358     type_register_static(&cmd646_ide_info);
359 }
360 
361 type_init(cmd646_ide_register_types)
362