xref: /openbmc/qemu/hw/ide/cmd646.c (revision 2ae2bce7)
1 /*
2  * QEMU IDE Emulation: PCI cmd646 support.
3  *
4  * Copyright (c) 2003 Fabrice Bellard
5  * Copyright (c) 2006 Openedhand Ltd.
6  *
7  * Permission is hereby granted, free of charge, to any person obtaining a copy
8  * of this software and associated documentation files (the "Software"), to deal
9  * in the Software without restriction, including without limitation the rights
10  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
11  * copies of the Software, and to permit persons to whom the Software is
12  * furnished to do so, subject to the following conditions:
13  *
14  * The above copyright notice and this permission notice shall be included in
15  * all copies or substantial portions of the Software.
16  *
17  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
18  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
19  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
20  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
21  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
22  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
23  * THE SOFTWARE.
24  */
25 #include <hw/hw.h>
26 #include <hw/pc.h>
27 #include <hw/pci.h>
28 #include <hw/isa.h>
29 #include "block.h"
30 #include "sysemu.h"
31 #include "dma.h"
32 
33 #include <hw/ide/pci.h>
34 
35 /* CMD646 specific */
36 #define MRDMODE		0x71
37 #define   MRDMODE_INTR_CH0	0x04
38 #define   MRDMODE_INTR_CH1	0x08
39 #define   MRDMODE_BLK_CH0	0x10
40 #define   MRDMODE_BLK_CH1	0x20
41 #define UDIDETCR0	0x73
42 #define UDIDETCR1	0x7B
43 
44 static void cmd646_update_irq(PCIIDEState *d);
45 
46 static uint64_t cmd646_cmd_read(void *opaque, target_phys_addr_t addr,
47                                 unsigned size)
48 {
49     CMD646BAR *cmd646bar = opaque;
50 
51     if (addr != 2 || size != 1) {
52         return ((uint64_t)1 << (size * 8)) - 1;
53     }
54     return ide_status_read(cmd646bar->bus, addr + 2);
55 }
56 
57 static void cmd646_cmd_write(void *opaque, target_phys_addr_t addr,
58                              uint64_t data, unsigned size)
59 {
60     CMD646BAR *cmd646bar = opaque;
61 
62     if (addr != 2 || size != 1) {
63         return;
64     }
65     ide_cmd_write(cmd646bar->bus, addr + 2, data);
66 }
67 
68 static const MemoryRegionOps cmd646_cmd_ops = {
69     .read = cmd646_cmd_read,
70     .write = cmd646_cmd_write,
71     .endianness = DEVICE_LITTLE_ENDIAN,
72 };
73 
74 static uint64_t cmd646_data_read(void *opaque, target_phys_addr_t addr,
75                                  unsigned size)
76 {
77     CMD646BAR *cmd646bar = opaque;
78 
79     if (size == 1) {
80         return ide_ioport_read(cmd646bar->bus, addr);
81     } else if (addr == 0) {
82         if (size == 2) {
83             return ide_data_readw(cmd646bar->bus, addr);
84         } else {
85             return ide_data_readl(cmd646bar->bus, addr);
86         }
87     }
88     return ((uint64_t)1 << (size * 8)) - 1;
89 }
90 
91 static void cmd646_data_write(void *opaque, target_phys_addr_t addr,
92                              uint64_t data, unsigned size)
93 {
94     CMD646BAR *cmd646bar = opaque;
95 
96     if (size == 1) {
97         return ide_ioport_write(cmd646bar->bus, addr, data);
98     } else if (addr == 0) {
99         if (size == 2) {
100             return ide_data_writew(cmd646bar->bus, addr, data);
101         } else {
102             return ide_data_writel(cmd646bar->bus, addr, data);
103         }
104     }
105 }
106 
107 static const MemoryRegionOps cmd646_data_ops = {
108     .read = cmd646_data_read,
109     .write = cmd646_data_write,
110     .endianness = DEVICE_LITTLE_ENDIAN,
111 };
112 
113 static void setup_cmd646_bar(PCIIDEState *d, int bus_num)
114 {
115     IDEBus *bus = &d->bus[bus_num];
116     CMD646BAR *bar = &d->cmd646_bar[bus_num];
117 
118     bar->bus = bus;
119     bar->pci_dev = d;
120     memory_region_init_io(&bar->cmd, &cmd646_cmd_ops, bar, "cmd646-cmd", 4);
121     memory_region_init_io(&bar->data, &cmd646_data_ops, bar, "cmd646-data", 8);
122 }
123 
124 static uint64_t bmdma_read(void *opaque, target_phys_addr_t addr,
125                            unsigned size)
126 {
127     BMDMAState *bm = opaque;
128     PCIIDEState *pci_dev = bm->pci_dev;
129     uint32_t val;
130 
131     if (size != 1) {
132         return ((uint64_t)1 << (size * 8)) - 1;
133     }
134 
135     switch(addr & 3) {
136     case 0:
137         val = bm->cmd;
138         break;
139     case 1:
140         val = pci_dev->dev.config[MRDMODE];
141         break;
142     case 2:
143         val = bm->status;
144         break;
145     case 3:
146         if (bm == &pci_dev->bmdma[0]) {
147             val = pci_dev->dev.config[UDIDETCR0];
148         } else {
149             val = pci_dev->dev.config[UDIDETCR1];
150         }
151         break;
152     default:
153         val = 0xff;
154         break;
155     }
156 #ifdef DEBUG_IDE
157     printf("bmdma: readb 0x%02x : 0x%02x\n", addr, val);
158 #endif
159     return val;
160 }
161 
162 static void bmdma_write(void *opaque, target_phys_addr_t addr,
163                         uint64_t val, unsigned size)
164 {
165     BMDMAState *bm = opaque;
166     PCIIDEState *pci_dev = bm->pci_dev;
167 
168     if (size != 1) {
169         return;
170     }
171 
172 #ifdef DEBUG_IDE
173     printf("bmdma: writeb 0x%02x : 0x%02x\n", addr, val);
174 #endif
175     switch(addr & 3) {
176     case 0:
177         bmdma_cmd_writeb(bm, val);
178         break;
179     case 1:
180         pci_dev->dev.config[MRDMODE] =
181             (pci_dev->dev.config[MRDMODE] & ~0x30) | (val & 0x30);
182         cmd646_update_irq(pci_dev);
183         break;
184     case 2:
185         bm->status = (val & 0x60) | (bm->status & 1) | (bm->status & ~val & 0x06);
186         break;
187     case 3:
188         if (bm == &pci_dev->bmdma[0])
189             pci_dev->dev.config[UDIDETCR0] = val;
190         else
191             pci_dev->dev.config[UDIDETCR1] = val;
192         break;
193     }
194 }
195 
196 static const MemoryRegionOps cmd646_bmdma_ops = {
197     .read = bmdma_read,
198     .write = bmdma_write,
199 };
200 
201 static void bmdma_setup_bar(PCIIDEState *d)
202 {
203     BMDMAState *bm;
204     int i;
205 
206     memory_region_init(&d->bmdma_bar, "cmd646-bmdma", 16);
207     for(i = 0;i < 2; i++) {
208         bm = &d->bmdma[i];
209         memory_region_init_io(&bm->extra_io, &cmd646_bmdma_ops, bm,
210                               "cmd646-bmdma-bus", 4);
211         memory_region_add_subregion(&d->bmdma_bar, i * 8, &bm->extra_io);
212         memory_region_init_io(&bm->addr_ioport, &bmdma_addr_ioport_ops, bm,
213                               "cmd646-bmdma-ioport", 4);
214         memory_region_add_subregion(&d->bmdma_bar, i * 8 + 4, &bm->addr_ioport);
215     }
216 }
217 
218 /* XXX: call it also when the MRDMODE is changed from the PCI config
219    registers */
220 static void cmd646_update_irq(PCIIDEState *d)
221 {
222     int pci_level;
223     pci_level = ((d->dev.config[MRDMODE] & MRDMODE_INTR_CH0) &&
224                  !(d->dev.config[MRDMODE] & MRDMODE_BLK_CH0)) ||
225         ((d->dev.config[MRDMODE] & MRDMODE_INTR_CH1) &&
226          !(d->dev.config[MRDMODE] & MRDMODE_BLK_CH1));
227     qemu_set_irq(d->dev.irq[0], pci_level);
228 }
229 
230 /* the PCI irq level is the logical OR of the two channels */
231 static void cmd646_set_irq(void *opaque, int channel, int level)
232 {
233     PCIIDEState *d = opaque;
234     int irq_mask;
235 
236     irq_mask = MRDMODE_INTR_CH0 << channel;
237     if (level)
238         d->dev.config[MRDMODE] |= irq_mask;
239     else
240         d->dev.config[MRDMODE] &= ~irq_mask;
241     cmd646_update_irq(d);
242 }
243 
244 static void cmd646_reset(void *opaque)
245 {
246     PCIIDEState *d = opaque;
247     unsigned int i;
248 
249     for (i = 0; i < 2; i++) {
250         ide_bus_reset(&d->bus[i]);
251     }
252 }
253 
254 /* CMD646 PCI IDE controller */
255 static int pci_cmd646_ide_initfn(PCIDevice *dev)
256 {
257     PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, dev);
258     uint8_t *pci_conf = d->dev.config;
259     qemu_irq *irq;
260     int i;
261 
262     pci_conf[PCI_CLASS_PROG] = 0x8f;
263 
264     pci_conf[0x51] = 0x04; // enable IDE0
265     if (d->secondary) {
266         /* XXX: if not enabled, really disable the seconday IDE controller */
267         pci_conf[0x51] |= 0x08; /* enable IDE1 */
268     }
269 
270     setup_cmd646_bar(d, 0);
271     setup_cmd646_bar(d, 1);
272     pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_IO, &d->cmd646_bar[0].data);
273     pci_register_bar(dev, 1, PCI_BASE_ADDRESS_SPACE_IO, &d->cmd646_bar[0].cmd);
274     pci_register_bar(dev, 2, PCI_BASE_ADDRESS_SPACE_IO, &d->cmd646_bar[1].data);
275     pci_register_bar(dev, 3, PCI_BASE_ADDRESS_SPACE_IO, &d->cmd646_bar[1].cmd);
276     bmdma_setup_bar(d);
277     pci_register_bar(dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &d->bmdma_bar);
278 
279     /* TODO: RST# value should be 0 */
280     pci_conf[PCI_INTERRUPT_PIN] = 0x01; // interrupt on pin 1
281 
282     irq = qemu_allocate_irqs(cmd646_set_irq, d, 2);
283     for (i = 0; i < 2; i++) {
284         ide_bus_new(&d->bus[i], &d->dev.qdev, i);
285         ide_init2(&d->bus[i], irq[i]);
286 
287         bmdma_init(&d->bus[i], &d->bmdma[i], d);
288         d->bmdma[i].bus = &d->bus[i];
289         qemu_add_vm_change_state_handler(d->bus[i].dma->ops->restart_cb,
290                                          &d->bmdma[i].dma);
291     }
292 
293     vmstate_register(&dev->qdev, 0, &vmstate_ide_pci, d);
294     qemu_register_reset(cmd646_reset, d);
295     return 0;
296 }
297 
298 static int pci_cmd646_ide_exitfn(PCIDevice *dev)
299 {
300     PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, dev);
301     unsigned i;
302 
303     for (i = 0; i < 2; ++i) {
304         memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].extra_io);
305         memory_region_destroy(&d->bmdma[i].extra_io);
306         memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].addr_ioport);
307         memory_region_destroy(&d->bmdma[i].addr_ioport);
308         memory_region_destroy(&d->cmd646_bar[i].cmd);
309         memory_region_destroy(&d->cmd646_bar[i].data);
310     }
311     memory_region_destroy(&d->bmdma_bar);
312 
313     return 0;
314 }
315 
316 void pci_cmd646_ide_init(PCIBus *bus, DriveInfo **hd_table,
317                          int secondary_ide_enabled)
318 {
319     PCIDevice *dev;
320 
321     dev = pci_create(bus, -1, "cmd646-ide");
322     qdev_prop_set_uint32(&dev->qdev, "secondary", secondary_ide_enabled);
323     qdev_init_nofail(&dev->qdev);
324 
325     pci_ide_create_devs(dev, hd_table);
326 }
327 
328 static Property cmd646_ide_properties[] = {
329     DEFINE_PROP_UINT32("secondary", PCIIDEState, secondary, 0),
330     DEFINE_PROP_END_OF_LIST(),
331 };
332 
333 static void cmd646_ide_class_init(ObjectClass *klass, void *data)
334 {
335     DeviceClass *dc = DEVICE_CLASS(klass);
336     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
337 
338     k->init = pci_cmd646_ide_initfn;
339     k->exit = pci_cmd646_ide_exitfn;
340     k->vendor_id = PCI_VENDOR_ID_CMD;
341     k->device_id = PCI_DEVICE_ID_CMD_646;
342     k->revision = 0x07;
343     k->class_id = PCI_CLASS_STORAGE_IDE;
344     dc->props = cmd646_ide_properties;
345 }
346 
347 static TypeInfo cmd646_ide_info = {
348     .name          = "cmd646-ide",
349     .parent        = TYPE_PCI_DEVICE,
350     .instance_size = sizeof(PCIIDEState),
351     .class_init    = cmd646_ide_class_init,
352 };
353 
354 static void cmd646_ide_register_types(void)
355 {
356     type_register_static(&cmd646_ide_info);
357 }
358 
359 type_init(cmd646_ide_register_types)
360