1 /* 2 * QEMU ATAPI Emulation 3 * 4 * Copyright (c) 2003 Fabrice Bellard 5 * Copyright (c) 2006 Openedhand Ltd. 6 * 7 * Permission is hereby granted, free of charge, to any person obtaining a copy 8 * of this software and associated documentation files (the "Software"), to deal 9 * in the Software without restriction, including without limitation the rights 10 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 11 * copies of the Software, and to permit persons to whom the Software is 12 * furnished to do so, subject to the following conditions: 13 * 14 * The above copyright notice and this permission notice shall be included in 15 * all copies or substantial portions of the Software. 16 * 17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 20 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 21 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 22 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 23 * THE SOFTWARE. 24 */ 25 26 #include "qemu/osdep.h" 27 #include "hw/ide/internal.h" 28 #include "hw/scsi/scsi.h" 29 #include "sysemu/block-backend.h" 30 #include "scsi/constants.h" 31 #include "trace.h" 32 33 #define ATAPI_SECTOR_BITS (2 + BDRV_SECTOR_BITS) 34 #define ATAPI_SECTOR_SIZE (1 << ATAPI_SECTOR_BITS) 35 36 static void ide_atapi_cmd_read_dma_cb(void *opaque, int ret); 37 38 static void padstr8(uint8_t *buf, int buf_size, const char *src) 39 { 40 int i; 41 for(i = 0; i < buf_size; i++) { 42 if (*src) 43 buf[i] = *src++; 44 else 45 buf[i] = ' '; 46 } 47 } 48 49 static void lba_to_msf(uint8_t *buf, int lba) 50 { 51 lba += 150; 52 buf[0] = (lba / 75) / 60; 53 buf[1] = (lba / 75) % 60; 54 buf[2] = lba % 75; 55 } 56 57 static inline int media_present(IDEState *s) 58 { 59 return !s->tray_open && s->nb_sectors > 0; 60 } 61 62 /* XXX: DVDs that could fit on a CD will be reported as a CD */ 63 static inline int media_is_dvd(IDEState *s) 64 { 65 return (media_present(s) && s->nb_sectors > CD_MAX_SECTORS); 66 } 67 68 static inline int media_is_cd(IDEState *s) 69 { 70 return (media_present(s) && s->nb_sectors <= CD_MAX_SECTORS); 71 } 72 73 static void cd_data_to_raw(uint8_t *buf, int lba) 74 { 75 /* sync bytes */ 76 buf[0] = 0x00; 77 memset(buf + 1, 0xff, 10); 78 buf[11] = 0x00; 79 buf += 12; 80 /* MSF */ 81 lba_to_msf(buf, lba); 82 buf[3] = 0x01; /* mode 1 data */ 83 buf += 4; 84 /* data */ 85 buf += 2048; 86 /* XXX: ECC not computed */ 87 memset(buf, 0, 288); 88 } 89 90 static int 91 cd_read_sector_sync(IDEState *s) 92 { 93 int ret; 94 block_acct_start(blk_get_stats(s->blk), &s->acct, 95 ATAPI_SECTOR_SIZE, BLOCK_ACCT_READ); 96 97 trace_cd_read_sector_sync(s->lba); 98 99 switch (s->cd_sector_size) { 100 case 2048: 101 ret = blk_pread(s->blk, (int64_t)s->lba << ATAPI_SECTOR_BITS, 102 ATAPI_SECTOR_SIZE, s->io_buffer, 0); 103 break; 104 case 2352: 105 ret = blk_pread(s->blk, (int64_t)s->lba << ATAPI_SECTOR_BITS, 106 ATAPI_SECTOR_SIZE, s->io_buffer + 16, 0); 107 if (ret >= 0) { 108 cd_data_to_raw(s->io_buffer, s->lba); 109 } 110 break; 111 default: 112 block_acct_invalid(blk_get_stats(s->blk), BLOCK_ACCT_READ); 113 return -EIO; 114 } 115 116 if (ret < 0) { 117 block_acct_failed(blk_get_stats(s->blk), &s->acct); 118 } else { 119 block_acct_done(blk_get_stats(s->blk), &s->acct); 120 s->lba++; 121 s->io_buffer_index = 0; 122 } 123 124 return ret; 125 } 126 127 static void cd_read_sector_cb(void *opaque, int ret) 128 { 129 IDEState *s = opaque; 130 131 trace_cd_read_sector_cb(s->lba, ret); 132 133 if (ret < 0) { 134 block_acct_failed(blk_get_stats(s->blk), &s->acct); 135 ide_atapi_io_error(s, ret); 136 return; 137 } 138 139 block_acct_done(blk_get_stats(s->blk), &s->acct); 140 141 if (s->cd_sector_size == 2352) { 142 cd_data_to_raw(s->io_buffer, s->lba); 143 } 144 145 s->lba++; 146 s->io_buffer_index = 0; 147 s->status &= ~BUSY_STAT; 148 149 ide_atapi_cmd_reply_end(s); 150 } 151 152 static int cd_read_sector(IDEState *s) 153 { 154 void *buf; 155 156 if (s->cd_sector_size != 2048 && s->cd_sector_size != 2352) { 157 block_acct_invalid(blk_get_stats(s->blk), BLOCK_ACCT_READ); 158 return -EINVAL; 159 } 160 161 buf = (s->cd_sector_size == 2352) ? s->io_buffer + 16 : s->io_buffer; 162 qemu_iovec_init_buf(&s->qiov, buf, ATAPI_SECTOR_SIZE); 163 164 trace_cd_read_sector(s->lba); 165 166 block_acct_start(blk_get_stats(s->blk), &s->acct, 167 ATAPI_SECTOR_SIZE, BLOCK_ACCT_READ); 168 169 ide_buffered_readv(s, (int64_t)s->lba << 2, &s->qiov, 4, 170 cd_read_sector_cb, s); 171 172 s->status |= BUSY_STAT; 173 return 0; 174 } 175 176 void ide_atapi_cmd_ok(IDEState *s) 177 { 178 s->error = 0; 179 s->status = READY_STAT | SEEK_STAT; 180 s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD; 181 ide_transfer_stop(s); 182 ide_bus_set_irq(s->bus); 183 } 184 185 void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc) 186 { 187 trace_ide_atapi_cmd_error(s, sense_key, asc); 188 s->error = sense_key << 4; 189 s->status = READY_STAT | ERR_STAT; 190 s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD; 191 s->sense_key = sense_key; 192 s->asc = asc; 193 ide_transfer_stop(s); 194 ide_bus_set_irq(s->bus); 195 } 196 197 void ide_atapi_io_error(IDEState *s, int ret) 198 { 199 /* XXX: handle more errors */ 200 if (ret == -ENOMEDIUM) { 201 ide_atapi_cmd_error(s, NOT_READY, 202 ASC_MEDIUM_NOT_PRESENT); 203 } else { 204 ide_atapi_cmd_error(s, ILLEGAL_REQUEST, 205 ASC_LOGICAL_BLOCK_OOR); 206 } 207 } 208 209 static uint16_t atapi_byte_count_limit(IDEState *s) 210 { 211 uint16_t bcl; 212 213 bcl = s->lcyl | (s->hcyl << 8); 214 if (bcl == 0xffff) { 215 return 0xfffe; 216 } 217 return bcl; 218 } 219 220 /* The whole ATAPI transfer logic is handled in this function */ 221 void ide_atapi_cmd_reply_end(IDEState *s) 222 { 223 int byte_count_limit, size, ret; 224 while (s->packet_transfer_size > 0) { 225 trace_ide_atapi_cmd_reply_end(s, s->packet_transfer_size, 226 s->elementary_transfer_size, 227 s->io_buffer_index); 228 229 /* see if a new sector must be read */ 230 if (s->lba != -1 && s->io_buffer_index >= s->cd_sector_size) { 231 if (!s->elementary_transfer_size) { 232 ret = cd_read_sector(s); 233 if (ret < 0) { 234 ide_atapi_io_error(s, ret); 235 } 236 return; 237 } else { 238 /* rebuffering within an elementary transfer is 239 * only possible with a sync request because we 240 * end up with a race condition otherwise */ 241 ret = cd_read_sector_sync(s); 242 if (ret < 0) { 243 ide_atapi_io_error(s, ret); 244 return; 245 } 246 } 247 } 248 if (s->elementary_transfer_size > 0) { 249 /* there are some data left to transmit in this elementary 250 transfer */ 251 size = s->cd_sector_size - s->io_buffer_index; 252 if (size > s->elementary_transfer_size) 253 size = s->elementary_transfer_size; 254 } else { 255 /* a new transfer is needed */ 256 s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO; 257 ide_bus_set_irq(s->bus); 258 byte_count_limit = atapi_byte_count_limit(s); 259 trace_ide_atapi_cmd_reply_end_bcl(s, byte_count_limit); 260 size = s->packet_transfer_size; 261 if (size > byte_count_limit) { 262 /* byte count limit must be even if this case */ 263 if (byte_count_limit & 1) 264 byte_count_limit--; 265 size = byte_count_limit; 266 } 267 s->lcyl = size; 268 s->hcyl = size >> 8; 269 s->elementary_transfer_size = size; 270 /* we cannot transmit more than one sector at a time */ 271 if (s->lba != -1) { 272 if (size > (s->cd_sector_size - s->io_buffer_index)) 273 size = (s->cd_sector_size - s->io_buffer_index); 274 } 275 trace_ide_atapi_cmd_reply_end_new(s, s->status); 276 } 277 s->packet_transfer_size -= size; 278 s->elementary_transfer_size -= size; 279 s->io_buffer_index += size; 280 assert(size <= s->io_buffer_total_len); 281 assert(s->io_buffer_index <= s->io_buffer_total_len); 282 283 /* Some adapters process PIO data right away. In that case, we need 284 * to avoid mutual recursion between ide_transfer_start 285 * and ide_atapi_cmd_reply_end. 286 */ 287 if (!ide_transfer_start_norecurse(s, 288 s->io_buffer + s->io_buffer_index - size, 289 size, ide_atapi_cmd_reply_end)) { 290 return; 291 } 292 } 293 294 /* end of transfer */ 295 trace_ide_atapi_cmd_reply_end_eot(s, s->status); 296 ide_atapi_cmd_ok(s); 297 ide_bus_set_irq(s->bus); 298 } 299 300 /* send a reply of 'size' bytes in s->io_buffer to an ATAPI command */ 301 static void ide_atapi_cmd_reply(IDEState *s, int size, int max_size) 302 { 303 if (size > max_size) 304 size = max_size; 305 s->lba = -1; /* no sector read */ 306 s->packet_transfer_size = size; 307 s->io_buffer_size = size; /* dma: send the reply data as one chunk */ 308 s->elementary_transfer_size = 0; 309 310 if (s->atapi_dma) { 311 block_acct_start(blk_get_stats(s->blk), &s->acct, size, 312 BLOCK_ACCT_READ); 313 s->status = READY_STAT | SEEK_STAT | DRQ_STAT; 314 ide_start_dma(s, ide_atapi_cmd_read_dma_cb); 315 } else { 316 s->status = READY_STAT | SEEK_STAT; 317 s->io_buffer_index = 0; 318 ide_atapi_cmd_reply_end(s); 319 } 320 } 321 322 /* start a CD-ROM read command */ 323 static void ide_atapi_cmd_read_pio(IDEState *s, int lba, int nb_sectors, 324 int sector_size) 325 { 326 assert(0 <= lba && lba < (s->nb_sectors >> 2)); 327 328 s->lba = lba; 329 s->packet_transfer_size = nb_sectors * sector_size; 330 s->elementary_transfer_size = 0; 331 s->io_buffer_index = sector_size; 332 s->cd_sector_size = sector_size; 333 334 ide_atapi_cmd_reply_end(s); 335 } 336 337 static void ide_atapi_cmd_check_status(IDEState *s) 338 { 339 trace_ide_atapi_cmd_check_status(s); 340 s->error = MC_ERR | (UNIT_ATTENTION << 4); 341 s->status = ERR_STAT; 342 s->nsector = 0; 343 ide_bus_set_irq(s->bus); 344 } 345 /* ATAPI DMA support */ 346 347 static void ide_atapi_cmd_read_dma_cb(void *opaque, int ret) 348 { 349 IDEState *s = opaque; 350 int data_offset, n; 351 352 if (ret < 0) { 353 if (ide_handle_rw_error(s, -ret, ide_dma_cmd_to_retry(s->dma_cmd))) { 354 if (s->bus->error_status) { 355 s->bus->dma->aiocb = NULL; 356 return; 357 } 358 goto eot; 359 } 360 } 361 362 if (s->io_buffer_size > 0) { 363 /* 364 * For a cdrom read sector command (s->lba != -1), 365 * adjust the lba for the next s->io_buffer_size chunk 366 * and dma the current chunk. 367 * For a command != read (s->lba == -1), just transfer 368 * the reply data. 369 */ 370 if (s->lba != -1) { 371 if (s->cd_sector_size == 2352) { 372 n = 1; 373 cd_data_to_raw(s->io_buffer, s->lba); 374 } else { 375 n = s->io_buffer_size >> 11; 376 } 377 s->lba += n; 378 } 379 s->packet_transfer_size -= s->io_buffer_size; 380 if (s->bus->dma->ops->rw_buf(s->bus->dma, 1) == 0) 381 goto eot; 382 } 383 384 if (s->packet_transfer_size <= 0) { 385 s->status = READY_STAT | SEEK_STAT; 386 s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD; 387 ide_bus_set_irq(s->bus); 388 goto eot; 389 } 390 391 s->io_buffer_index = 0; 392 if (s->cd_sector_size == 2352) { 393 n = 1; 394 s->io_buffer_size = s->cd_sector_size; 395 data_offset = 16; 396 } else { 397 n = s->packet_transfer_size >> 11; 398 if (n > (IDE_DMA_BUF_SECTORS / 4)) 399 n = (IDE_DMA_BUF_SECTORS / 4); 400 s->io_buffer_size = n * 2048; 401 data_offset = 0; 402 } 403 trace_ide_atapi_cmd_read_dma_cb_aio(s, s->lba, n); 404 qemu_iovec_init_buf(&s->bus->dma->qiov, s->io_buffer + data_offset, 405 n * ATAPI_SECTOR_SIZE); 406 407 s->bus->dma->aiocb = ide_buffered_readv(s, (int64_t)s->lba << 2, 408 &s->bus->dma->qiov, n * 4, 409 ide_atapi_cmd_read_dma_cb, s); 410 return; 411 412 eot: 413 if (ret < 0) { 414 block_acct_failed(blk_get_stats(s->blk), &s->acct); 415 } else { 416 block_acct_done(blk_get_stats(s->blk), &s->acct); 417 } 418 ide_set_inactive(s, false); 419 } 420 421 /* start a CD-ROM read command with DMA */ 422 /* XXX: test if DMA is available */ 423 static void ide_atapi_cmd_read_dma(IDEState *s, int lba, int nb_sectors, 424 int sector_size) 425 { 426 assert(0 <= lba && lba < (s->nb_sectors >> 2)); 427 428 s->lba = lba; 429 s->packet_transfer_size = nb_sectors * sector_size; 430 s->io_buffer_size = 0; 431 s->cd_sector_size = sector_size; 432 433 block_acct_start(blk_get_stats(s->blk), &s->acct, s->packet_transfer_size, 434 BLOCK_ACCT_READ); 435 436 /* XXX: check if BUSY_STAT should be set */ 437 s->status = READY_STAT | SEEK_STAT | DRQ_STAT | BUSY_STAT; 438 ide_start_dma(s, ide_atapi_cmd_read_dma_cb); 439 } 440 441 static void ide_atapi_cmd_read(IDEState *s, int lba, int nb_sectors, 442 int sector_size) 443 { 444 trace_ide_atapi_cmd_read(s, s->atapi_dma ? "dma" : "pio", 445 lba, nb_sectors); 446 if (s->atapi_dma) { 447 ide_atapi_cmd_read_dma(s, lba, nb_sectors, sector_size); 448 } else { 449 ide_atapi_cmd_read_pio(s, lba, nb_sectors, sector_size); 450 } 451 } 452 453 void ide_atapi_dma_restart(IDEState *s) 454 { 455 /* 456 * At this point we can just re-evaluate the packet command and start over. 457 * The presence of ->dma_cb callback in the pre_save ensures that the packet 458 * command has been completely sent and we can safely restart command. 459 */ 460 s->unit = s->bus->retry_unit; 461 s->bus->dma->ops->restart_dma(s->bus->dma); 462 ide_atapi_cmd(s); 463 } 464 465 static inline uint8_t ide_atapi_set_profile(uint8_t *buf, uint8_t *index, 466 uint16_t profile) 467 { 468 uint8_t *buf_profile = buf + 12; /* start of profiles */ 469 470 buf_profile += ((*index) * 4); /* start of indexed profile */ 471 stw_be_p(buf_profile, profile); 472 buf_profile[2] = ((buf_profile[0] == buf[6]) && (buf_profile[1] == buf[7])); 473 474 /* each profile adds 4 bytes to the response */ 475 (*index)++; 476 buf[11] += 4; /* Additional Length */ 477 478 return 4; 479 } 480 481 static int ide_dvd_read_structure(IDEState *s, int format, 482 const uint8_t *packet, uint8_t *buf) 483 { 484 switch (format) { 485 case 0x0: /* Physical format information */ 486 { 487 int layer = packet[6]; 488 uint64_t total_sectors; 489 490 if (layer != 0) 491 return -ASC_INV_FIELD_IN_CMD_PACKET; 492 493 total_sectors = s->nb_sectors >> 2; 494 if (total_sectors == 0) { 495 return -ASC_MEDIUM_NOT_PRESENT; 496 } 497 498 buf[4] = 1; /* DVD-ROM, part version 1 */ 499 buf[5] = 0xf; /* 120mm disc, minimum rate unspecified */ 500 buf[6] = 1; /* one layer, read-only (per MMC-2 spec) */ 501 buf[7] = 0; /* default densities */ 502 503 /* FIXME: 0x30000 per spec? */ 504 stl_be_p(buf + 8, 0); /* start sector */ 505 stl_be_p(buf + 12, total_sectors - 1); /* end sector */ 506 stl_be_p(buf + 16, total_sectors - 1); /* l0 end sector */ 507 508 /* Size of buffer, not including 2 byte size field */ 509 stw_be_p(buf, 2048 + 2); 510 511 /* 2k data + 4 byte header */ 512 return (2048 + 4); 513 } 514 515 case 0x01: /* DVD copyright information */ 516 buf[4] = 0; /* no copyright data */ 517 buf[5] = 0; /* no region restrictions */ 518 519 /* Size of buffer, not including 2 byte size field */ 520 stw_be_p(buf, 4 + 2); 521 522 /* 4 byte header + 4 byte data */ 523 return (4 + 4); 524 525 case 0x03: /* BCA information - invalid field for no BCA info */ 526 return -ASC_INV_FIELD_IN_CMD_PACKET; 527 528 case 0x04: /* DVD disc manufacturing information */ 529 /* Size of buffer, not including 2 byte size field */ 530 stw_be_p(buf, 2048 + 2); 531 532 /* 2k data + 4 byte header */ 533 return (2048 + 4); 534 535 case 0xff: 536 /* 537 * This lists all the command capabilities above. Add new ones 538 * in order and update the length and buffer return values. 539 */ 540 541 buf[4] = 0x00; /* Physical format */ 542 buf[5] = 0x40; /* Not writable, is readable */ 543 stw_be_p(buf + 6, 2048 + 4); 544 545 buf[8] = 0x01; /* Copyright info */ 546 buf[9] = 0x40; /* Not writable, is readable */ 547 stw_be_p(buf + 10, 4 + 4); 548 549 buf[12] = 0x03; /* BCA info */ 550 buf[13] = 0x40; /* Not writable, is readable */ 551 stw_be_p(buf + 14, 188 + 4); 552 553 buf[16] = 0x04; /* Manufacturing info */ 554 buf[17] = 0x40; /* Not writable, is readable */ 555 stw_be_p(buf + 18, 2048 + 4); 556 557 /* Size of buffer, not including 2 byte size field */ 558 stw_be_p(buf, 16 + 2); 559 560 /* data written + 4 byte header */ 561 return (16 + 4); 562 563 default: /* TODO: formats beyond DVD-ROM requires */ 564 return -ASC_INV_FIELD_IN_CMD_PACKET; 565 } 566 } 567 568 static unsigned int event_status_media(IDEState *s, 569 uint8_t *buf) 570 { 571 uint8_t event_code, media_status; 572 573 media_status = 0; 574 if (s->tray_open) { 575 media_status = MS_TRAY_OPEN; 576 } else if (blk_is_inserted(s->blk)) { 577 media_status = MS_MEDIA_PRESENT; 578 } 579 580 /* Event notification descriptor */ 581 event_code = MEC_NO_CHANGE; 582 if (media_status != MS_TRAY_OPEN) { 583 if (s->events.new_media) { 584 event_code = MEC_NEW_MEDIA; 585 s->events.new_media = false; 586 } else if (s->events.eject_request) { 587 event_code = MEC_EJECT_REQUESTED; 588 s->events.eject_request = false; 589 } 590 } 591 592 buf[4] = event_code; 593 buf[5] = media_status; 594 595 /* These fields are reserved, just clear them. */ 596 buf[6] = 0; 597 buf[7] = 0; 598 599 return 8; /* We wrote to 4 extra bytes from the header */ 600 } 601 602 /* 603 * Before transferring data or otherwise signalling acceptance of a command 604 * marked CONDDATA, we must check the validity of the byte_count_limit. 605 */ 606 static bool validate_bcl(IDEState *s) 607 { 608 /* TODO: Check IDENTIFY data word 125 for defacult BCL (currently 0) */ 609 if (s->atapi_dma || atapi_byte_count_limit(s)) { 610 return true; 611 } 612 613 /* TODO: Move abort back into core.c and introduce proper error flow between 614 * ATAPI layer and IDE core layer */ 615 ide_abort_command(s); 616 return false; 617 } 618 619 static void cmd_get_event_status_notification(IDEState *s, 620 uint8_t *buf) 621 { 622 const uint8_t *packet = buf; 623 624 struct { 625 uint8_t opcode; 626 uint8_t polled; /* lsb bit is polled; others are reserved */ 627 uint8_t reserved2[2]; 628 uint8_t class; 629 uint8_t reserved3[2]; 630 uint16_t len; 631 uint8_t control; 632 } QEMU_PACKED *gesn_cdb; 633 634 struct { 635 uint16_t len; 636 uint8_t notification_class; 637 uint8_t supported_events; 638 } QEMU_PACKED *gesn_event_header; 639 unsigned int max_len, used_len; 640 641 gesn_cdb = (void *)packet; 642 gesn_event_header = (void *)buf; 643 644 max_len = be16_to_cpu(gesn_cdb->len); 645 646 /* It is fine by the MMC spec to not support async mode operations */ 647 if (!(gesn_cdb->polled & 0x01)) { /* asynchronous mode */ 648 /* Only polling is supported, asynchronous mode is not. */ 649 ide_atapi_cmd_error(s, ILLEGAL_REQUEST, 650 ASC_INV_FIELD_IN_CMD_PACKET); 651 return; 652 } 653 654 /* polling mode operation */ 655 656 /* 657 * These are the supported events. 658 * 659 * We currently only support requests of the 'media' type. 660 * Notification class requests and supported event classes are bitmasks, 661 * but they are build from the same values as the "notification class" 662 * field. 663 */ 664 gesn_event_header->supported_events = 1 << GESN_MEDIA; 665 666 /* 667 * We use |= below to set the class field; other bits in this byte 668 * are reserved now but this is useful to do if we have to use the 669 * reserved fields later. 670 */ 671 gesn_event_header->notification_class = 0; 672 673 /* 674 * Responses to requests are to be based on request priority. The 675 * notification_class_request_type enum above specifies the 676 * priority: upper elements are higher prio than lower ones. 677 */ 678 if (gesn_cdb->class & (1 << GESN_MEDIA)) { 679 gesn_event_header->notification_class |= GESN_MEDIA; 680 used_len = event_status_media(s, buf); 681 } else { 682 gesn_event_header->notification_class = 0x80; /* No event available */ 683 used_len = sizeof(*gesn_event_header); 684 } 685 gesn_event_header->len = cpu_to_be16(used_len 686 - sizeof(*gesn_event_header)); 687 ide_atapi_cmd_reply(s, used_len, max_len); 688 } 689 690 static void cmd_request_sense(IDEState *s, uint8_t *buf) 691 { 692 int max_len = buf[4]; 693 694 memset(buf, 0, 18); 695 buf[0] = 0x70 | (1 << 7); 696 buf[2] = s->sense_key; 697 buf[7] = 10; 698 buf[12] = s->asc; 699 700 if (s->sense_key == UNIT_ATTENTION) { 701 s->sense_key = NO_SENSE; 702 } 703 704 ide_atapi_cmd_reply(s, 18, max_len); 705 } 706 707 static void cmd_inquiry(IDEState *s, uint8_t *buf) 708 { 709 uint8_t page_code = buf[2]; 710 int max_len = buf[4]; 711 712 unsigned idx = 0; 713 unsigned size_idx; 714 unsigned preamble_len; 715 716 /* If the EVPD (Enable Vital Product Data) bit is set in byte 1, 717 * we are being asked for a specific page of info indicated by byte 2. */ 718 if (buf[1] & 0x01) { 719 preamble_len = 4; 720 size_idx = 3; 721 722 buf[idx++] = 0x05; /* CD-ROM */ 723 buf[idx++] = page_code; /* Page Code */ 724 buf[idx++] = 0x00; /* reserved */ 725 idx++; /* length (set later) */ 726 727 switch (page_code) { 728 case 0x00: 729 /* Supported Pages: List of supported VPD responses. */ 730 buf[idx++] = 0x00; /* 0x00: Supported Pages, and: */ 731 buf[idx++] = 0x83; /* 0x83: Device Identification. */ 732 break; 733 734 case 0x83: 735 /* Device Identification. Each entry is optional, but the entries 736 * included here are modeled after libata's VPD responses. 737 * If the response is given, at least one entry must be present. */ 738 739 /* Entry 1: Serial */ 740 if (idx + 24 > max_len) { 741 /* Not enough room for even the first entry: */ 742 /* 4 byte header + 20 byte string */ 743 ide_atapi_cmd_error(s, ILLEGAL_REQUEST, 744 ASC_DATA_PHASE_ERROR); 745 return; 746 } 747 buf[idx++] = 0x02; /* Ascii */ 748 buf[idx++] = 0x00; /* Vendor Specific */ 749 buf[idx++] = 0x00; 750 buf[idx++] = 20; /* Remaining length */ 751 padstr8(buf + idx, 20, s->drive_serial_str); 752 idx += 20; 753 754 /* Entry 2: Drive Model and Serial */ 755 if (idx + 72 > max_len) { 756 /* 4 (header) + 8 (vendor) + 60 (model & serial) */ 757 goto out; 758 } 759 buf[idx++] = 0x02; /* Ascii */ 760 buf[idx++] = 0x01; /* T10 Vendor */ 761 buf[idx++] = 0x00; 762 buf[idx++] = 68; 763 padstr8(buf + idx, 8, "ATA"); /* Generic T10 vendor */ 764 idx += 8; 765 padstr8(buf + idx, 40, s->drive_model_str); 766 idx += 40; 767 padstr8(buf + idx, 20, s->drive_serial_str); 768 idx += 20; 769 770 /* Entry 3: WWN */ 771 if (s->wwn && (idx + 12 <= max_len)) { 772 /* 4 byte header + 8 byte wwn */ 773 buf[idx++] = 0x01; /* Binary */ 774 buf[idx++] = 0x03; /* NAA */ 775 buf[idx++] = 0x00; 776 buf[idx++] = 0x08; 777 stq_be_p(&buf[idx], s->wwn); 778 idx += 8; 779 } 780 break; 781 782 default: 783 /* SPC-3, revision 23 sec. 6.4 */ 784 ide_atapi_cmd_error(s, ILLEGAL_REQUEST, 785 ASC_INV_FIELD_IN_CMD_PACKET); 786 return; 787 } 788 } else { 789 preamble_len = 5; 790 size_idx = 4; 791 792 buf[0] = 0x05; /* CD-ROM */ 793 buf[1] = 0x80; /* removable */ 794 buf[2] = 0x00; /* ISO */ 795 buf[3] = 0x21; /* ATAPI-2 (XXX: put ATAPI-4 ?) */ 796 /* buf[size_idx] set below. */ 797 buf[5] = 0; /* reserved */ 798 buf[6] = 0; /* reserved */ 799 buf[7] = 0; /* reserved */ 800 padstr8(buf + 8, 8, "QEMU"); 801 padstr8(buf + 16, 16, "QEMU DVD-ROM"); 802 padstr8(buf + 32, 4, s->version); 803 idx = 36; 804 } 805 806 out: 807 buf[size_idx] = idx - preamble_len; 808 ide_atapi_cmd_reply(s, idx, max_len); 809 } 810 811 static void cmd_get_configuration(IDEState *s, uint8_t *buf) 812 { 813 uint32_t len; 814 uint8_t index = 0; 815 int max_len; 816 817 /* only feature 0 is supported */ 818 if (buf[2] != 0 || buf[3] != 0) { 819 ide_atapi_cmd_error(s, ILLEGAL_REQUEST, 820 ASC_INV_FIELD_IN_CMD_PACKET); 821 return; 822 } 823 824 /* XXX: could result in alignment problems in some architectures */ 825 max_len = lduw_be_p(buf + 7); 826 827 /* 828 * XXX: avoid overflow for io_buffer if max_len is bigger than 829 * the size of that buffer (dimensioned to max number of 830 * sectors to transfer at once) 831 * 832 * Only a problem if the feature/profiles grow. 833 */ 834 if (max_len > BDRV_SECTOR_SIZE) { 835 /* XXX: assume 1 sector */ 836 max_len = BDRV_SECTOR_SIZE; 837 } 838 839 memset(buf, 0, max_len); 840 /* 841 * the number of sectors from the media tells us which profile 842 * to use as current. 0 means there is no media 843 */ 844 if (media_is_dvd(s)) { 845 stw_be_p(buf + 6, MMC_PROFILE_DVD_ROM); 846 } else if (media_is_cd(s)) { 847 stw_be_p(buf + 6, MMC_PROFILE_CD_ROM); 848 } 849 850 buf[10] = 0x02 | 0x01; /* persistent and current */ 851 len = 12; /* headers: 8 + 4 */ 852 len += ide_atapi_set_profile(buf, &index, MMC_PROFILE_DVD_ROM); 853 len += ide_atapi_set_profile(buf, &index, MMC_PROFILE_CD_ROM); 854 stl_be_p(buf, len - 4); /* data length */ 855 856 ide_atapi_cmd_reply(s, len, max_len); 857 } 858 859 static void cmd_mode_sense(IDEState *s, uint8_t *buf) 860 { 861 int action, code; 862 int max_len; 863 864 max_len = lduw_be_p(buf + 7); 865 action = buf[2] >> 6; 866 code = buf[2] & 0x3f; 867 868 switch(action) { 869 case 0: /* current values */ 870 switch(code) { 871 case MODE_PAGE_R_W_ERROR: /* error recovery */ 872 stw_be_p(&buf[0], 16 - 2); 873 buf[2] = 0x70; 874 buf[3] = 0; 875 buf[4] = 0; 876 buf[5] = 0; 877 buf[6] = 0; 878 buf[7] = 0; 879 880 buf[8] = MODE_PAGE_R_W_ERROR; 881 buf[9] = 16 - 10; 882 buf[10] = 0x00; 883 buf[11] = 0x05; 884 buf[12] = 0x00; 885 buf[13] = 0x00; 886 buf[14] = 0x00; 887 buf[15] = 0x00; 888 ide_atapi_cmd_reply(s, 16, max_len); 889 break; 890 case MODE_PAGE_AUDIO_CTL: 891 stw_be_p(&buf[0], 24 - 2); 892 buf[2] = 0x70; 893 buf[3] = 0; 894 buf[4] = 0; 895 buf[5] = 0; 896 buf[6] = 0; 897 buf[7] = 0; 898 899 buf[8] = MODE_PAGE_AUDIO_CTL; 900 buf[9] = 24 - 10; 901 /* Fill with CDROM audio volume */ 902 buf[17] = 0; 903 buf[19] = 0; 904 buf[21] = 0; 905 buf[23] = 0; 906 907 ide_atapi_cmd_reply(s, 24, max_len); 908 break; 909 case MODE_PAGE_CAPABILITIES: 910 stw_be_p(&buf[0], 30 - 2); 911 buf[2] = 0x70; 912 buf[3] = 0; 913 buf[4] = 0; 914 buf[5] = 0; 915 buf[6] = 0; 916 buf[7] = 0; 917 918 buf[8] = MODE_PAGE_CAPABILITIES; 919 buf[9] = 30 - 10; 920 buf[10] = 0x3b; /* read CDR/CDRW/DVDROM/DVDR/DVDRAM */ 921 buf[11] = 0x00; 922 923 /* Claim PLAY_AUDIO capability (0x01) since some Linux 924 code checks for this to automount media. */ 925 buf[12] = 0x71; 926 buf[13] = 3 << 5; 927 buf[14] = (1 << 0) | (1 << 3) | (1 << 5); 928 if (s->tray_locked) { 929 buf[14] |= 1 << 1; 930 } 931 buf[15] = 0x00; /* No volume & mute control, no changer */ 932 stw_be_p(&buf[16], 704); /* 4x read speed */ 933 buf[18] = 0; /* Two volume levels */ 934 buf[19] = 2; 935 stw_be_p(&buf[20], 512); /* 512k buffer */ 936 stw_be_p(&buf[22], 704); /* 4x read speed current */ 937 buf[24] = 0; 938 buf[25] = 0; 939 buf[26] = 0; 940 buf[27] = 0; 941 buf[28] = 0; 942 buf[29] = 0; 943 ide_atapi_cmd_reply(s, 30, max_len); 944 break; 945 default: 946 goto error_cmd; 947 } 948 break; 949 case 1: /* changeable values */ 950 goto error_cmd; 951 case 2: /* default values */ 952 goto error_cmd; 953 default: 954 case 3: /* saved values */ 955 ide_atapi_cmd_error(s, ILLEGAL_REQUEST, 956 ASC_SAVING_PARAMETERS_NOT_SUPPORTED); 957 break; 958 } 959 return; 960 961 error_cmd: 962 ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_INV_FIELD_IN_CMD_PACKET); 963 } 964 965 static void cmd_test_unit_ready(IDEState *s, uint8_t *buf) 966 { 967 /* Not Ready Conditions are already handled in ide_atapi_cmd(), so if we 968 * come here, we know that it's ready. */ 969 ide_atapi_cmd_ok(s); 970 } 971 972 static void cmd_prevent_allow_medium_removal(IDEState *s, uint8_t* buf) 973 { 974 s->tray_locked = buf[4] & 1; 975 blk_lock_medium(s->blk, buf[4] & 1); 976 ide_atapi_cmd_ok(s); 977 } 978 979 static void cmd_read(IDEState *s, uint8_t* buf) 980 { 981 unsigned int nb_sectors, lba; 982 983 /* Total logical sectors of ATAPI_SECTOR_SIZE(=2048) bytes */ 984 uint64_t total_sectors = s->nb_sectors >> 2; 985 986 if (buf[0] == GPCMD_READ_10) { 987 nb_sectors = lduw_be_p(buf + 7); 988 } else { 989 nb_sectors = ldl_be_p(buf + 6); 990 } 991 if (nb_sectors == 0) { 992 ide_atapi_cmd_ok(s); 993 return; 994 } 995 996 lba = ldl_be_p(buf + 2); 997 if (lba >= total_sectors || lba + nb_sectors - 1 >= total_sectors) { 998 ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_LOGICAL_BLOCK_OOR); 999 return; 1000 } 1001 1002 ide_atapi_cmd_read(s, lba, nb_sectors, 2048); 1003 } 1004 1005 static void cmd_read_cd(IDEState *s, uint8_t* buf) 1006 { 1007 unsigned int nb_sectors, lba, transfer_request; 1008 1009 /* Total logical sectors of ATAPI_SECTOR_SIZE(=2048) bytes */ 1010 uint64_t total_sectors = s->nb_sectors >> 2; 1011 1012 nb_sectors = (buf[6] << 16) | (buf[7] << 8) | buf[8]; 1013 if (nb_sectors == 0) { 1014 ide_atapi_cmd_ok(s); 1015 return; 1016 } 1017 1018 lba = ldl_be_p(buf + 2); 1019 if (lba >= total_sectors || lba + nb_sectors - 1 >= total_sectors) { 1020 ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_LOGICAL_BLOCK_OOR); 1021 return; 1022 } 1023 1024 transfer_request = buf[9] & 0xf8; 1025 if (transfer_request == 0x00) { 1026 /* nothing */ 1027 ide_atapi_cmd_ok(s); 1028 return; 1029 } 1030 1031 /* Check validity of BCL before transferring data */ 1032 if (!validate_bcl(s)) { 1033 return; 1034 } 1035 1036 switch (transfer_request) { 1037 case 0x10: 1038 /* normal read */ 1039 ide_atapi_cmd_read(s, lba, nb_sectors, 2048); 1040 break; 1041 case 0xf8: 1042 /* read all data */ 1043 ide_atapi_cmd_read(s, lba, nb_sectors, 2352); 1044 break; 1045 default: 1046 ide_atapi_cmd_error(s, ILLEGAL_REQUEST, 1047 ASC_INV_FIELD_IN_CMD_PACKET); 1048 break; 1049 } 1050 } 1051 1052 static void cmd_seek(IDEState *s, uint8_t* buf) 1053 { 1054 unsigned int lba; 1055 uint64_t total_sectors = s->nb_sectors >> 2; 1056 1057 lba = ldl_be_p(buf + 2); 1058 if (lba >= total_sectors) { 1059 ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_LOGICAL_BLOCK_OOR); 1060 return; 1061 } 1062 1063 ide_atapi_cmd_ok(s); 1064 } 1065 1066 static void cmd_start_stop_unit(IDEState *s, uint8_t* buf) 1067 { 1068 int sense; 1069 bool start = buf[4] & 1; 1070 bool loej = buf[4] & 2; /* load on start, eject on !start */ 1071 int pwrcnd = buf[4] & 0xf0; 1072 1073 if (pwrcnd) { 1074 /* eject/load only happens for power condition == 0 */ 1075 ide_atapi_cmd_ok(s); 1076 return; 1077 } 1078 1079 if (loej) { 1080 if (!start && !s->tray_open && s->tray_locked) { 1081 sense = blk_is_inserted(s->blk) 1082 ? NOT_READY : ILLEGAL_REQUEST; 1083 ide_atapi_cmd_error(s, sense, ASC_MEDIA_REMOVAL_PREVENTED); 1084 return; 1085 } 1086 1087 if (s->tray_open != !start) { 1088 blk_eject(s->blk, !start); 1089 s->tray_open = !start; 1090 } 1091 } 1092 1093 ide_atapi_cmd_ok(s); 1094 } 1095 1096 static void cmd_mechanism_status(IDEState *s, uint8_t* buf) 1097 { 1098 int max_len = lduw_be_p(buf + 8); 1099 1100 stw_be_p(buf, 0); 1101 /* no current LBA */ 1102 buf[2] = 0; 1103 buf[3] = 0; 1104 buf[4] = 0; 1105 buf[5] = 1; 1106 stw_be_p(buf + 6, 0); 1107 ide_atapi_cmd_reply(s, 8, max_len); 1108 } 1109 1110 static void cmd_read_toc_pma_atip(IDEState *s, uint8_t* buf) 1111 { 1112 int format, msf, start_track, len; 1113 int max_len; 1114 uint64_t total_sectors = s->nb_sectors >> 2; 1115 1116 max_len = lduw_be_p(buf + 7); 1117 format = buf[9] >> 6; 1118 msf = (buf[1] >> 1) & 1; 1119 start_track = buf[6]; 1120 1121 switch(format) { 1122 case 0: 1123 len = cdrom_read_toc(total_sectors, buf, msf, start_track); 1124 if (len < 0) 1125 goto error_cmd; 1126 ide_atapi_cmd_reply(s, len, max_len); 1127 break; 1128 case 1: 1129 /* multi session : only a single session defined */ 1130 memset(buf, 0, 12); 1131 buf[1] = 0x0a; 1132 buf[2] = 0x01; 1133 buf[3] = 0x01; 1134 ide_atapi_cmd_reply(s, 12, max_len); 1135 break; 1136 case 2: 1137 len = cdrom_read_toc_raw(total_sectors, buf, msf, start_track); 1138 if (len < 0) 1139 goto error_cmd; 1140 ide_atapi_cmd_reply(s, len, max_len); 1141 break; 1142 default: 1143 error_cmd: 1144 ide_atapi_cmd_error(s, ILLEGAL_REQUEST, 1145 ASC_INV_FIELD_IN_CMD_PACKET); 1146 } 1147 } 1148 1149 static void cmd_read_cdvd_capacity(IDEState *s, uint8_t* buf) 1150 { 1151 uint64_t total_sectors = s->nb_sectors >> 2; 1152 1153 /* NOTE: it is really the number of sectors minus 1 */ 1154 stl_be_p(buf, total_sectors - 1); 1155 stl_be_p(buf + 4, 2048); 1156 ide_atapi_cmd_reply(s, 8, 8); 1157 } 1158 1159 static void cmd_read_disc_information(IDEState *s, uint8_t* buf) 1160 { 1161 uint8_t type = buf[1] & 7; 1162 uint32_t max_len = lduw_be_p(buf + 7); 1163 1164 /* Types 1/2 are only defined for Blu-Ray. */ 1165 if (type != 0) { 1166 ide_atapi_cmd_error(s, ILLEGAL_REQUEST, 1167 ASC_INV_FIELD_IN_CMD_PACKET); 1168 return; 1169 } 1170 1171 memset(buf, 0, 34); 1172 buf[1] = 32; 1173 buf[2] = 0xe; /* last session complete, disc finalized */ 1174 buf[3] = 1; /* first track on disc */ 1175 buf[4] = 1; /* # of sessions */ 1176 buf[5] = 1; /* first track of last session */ 1177 buf[6] = 1; /* last track of last session */ 1178 buf[7] = 0x20; /* unrestricted use */ 1179 buf[8] = 0x00; /* CD-ROM or DVD-ROM */ 1180 /* 9-10-11: most significant byte corresponding bytes 4-5-6 */ 1181 /* 12-23: not meaningful for CD-ROM or DVD-ROM */ 1182 /* 24-31: disc bar code */ 1183 /* 32: disc application code */ 1184 /* 33: number of OPC tables */ 1185 1186 ide_atapi_cmd_reply(s, 34, max_len); 1187 } 1188 1189 static void cmd_read_dvd_structure(IDEState *s, uint8_t* buf) 1190 { 1191 int max_len; 1192 int media = buf[1]; 1193 int format = buf[7]; 1194 int ret; 1195 1196 max_len = lduw_be_p(buf + 8); 1197 1198 if (format < 0xff) { 1199 if (media_is_cd(s)) { 1200 ide_atapi_cmd_error(s, ILLEGAL_REQUEST, 1201 ASC_INCOMPATIBLE_FORMAT); 1202 return; 1203 } else if (!media_present(s)) { 1204 ide_atapi_cmd_error(s, ILLEGAL_REQUEST, 1205 ASC_INV_FIELD_IN_CMD_PACKET); 1206 return; 1207 } 1208 } 1209 1210 memset(buf, 0, max_len > IDE_DMA_BUF_SECTORS * BDRV_SECTOR_SIZE + 4 ? 1211 IDE_DMA_BUF_SECTORS * BDRV_SECTOR_SIZE + 4 : max_len); 1212 1213 switch (format) { 1214 case 0x00 ... 0x7f: 1215 case 0xff: 1216 if (media == 0) { 1217 ret = ide_dvd_read_structure(s, format, buf, buf); 1218 1219 if (ret < 0) { 1220 ide_atapi_cmd_error(s, ILLEGAL_REQUEST, -ret); 1221 } else { 1222 ide_atapi_cmd_reply(s, ret, max_len); 1223 } 1224 1225 break; 1226 } 1227 /* TODO: BD support, fall through for now */ 1228 1229 /* Generic disk structures */ 1230 case 0x80: /* TODO: AACS volume identifier */ 1231 case 0x81: /* TODO: AACS media serial number */ 1232 case 0x82: /* TODO: AACS media identifier */ 1233 case 0x83: /* TODO: AACS media key block */ 1234 case 0x90: /* TODO: List of recognized format layers */ 1235 case 0xc0: /* TODO: Write protection status */ 1236 default: 1237 ide_atapi_cmd_error(s, ILLEGAL_REQUEST, 1238 ASC_INV_FIELD_IN_CMD_PACKET); 1239 break; 1240 } 1241 } 1242 1243 static void cmd_set_speed(IDEState *s, uint8_t* buf) 1244 { 1245 ide_atapi_cmd_ok(s); 1246 } 1247 1248 enum { 1249 /* 1250 * Only commands flagged as ALLOW_UA are allowed to run under a 1251 * unit attention condition. (See MMC-5, section 4.1.6.1) 1252 */ 1253 ALLOW_UA = 0x01, 1254 1255 /* 1256 * Commands flagged with CHECK_READY can only execute if a medium is present. 1257 * Otherwise they report the Not Ready Condition. (See MMC-5, section 1258 * 4.1.8) 1259 */ 1260 CHECK_READY = 0x02, 1261 1262 /* 1263 * Commands flagged with NONDATA do not in any circumstances return 1264 * any data via ide_atapi_cmd_reply. These commands are exempt from 1265 * the normal byte_count_limit constraints. 1266 * See ATA8-ACS3 "7.21.5 Byte Count Limit" 1267 */ 1268 NONDATA = 0x04, 1269 1270 /* 1271 * CONDDATA implies a command that transfers data only conditionally based 1272 * on the presence of suboptions. It should be exempt from the BCL check at 1273 * command validation time, but it needs to be checked at the command 1274 * handler level instead. 1275 */ 1276 CONDDATA = 0x08, 1277 }; 1278 1279 static const struct AtapiCmd { 1280 void (*handler)(IDEState *s, uint8_t *buf); 1281 int flags; 1282 } atapi_cmd_table[0x100] = { 1283 [ 0x00 ] = { cmd_test_unit_ready, CHECK_READY | NONDATA }, 1284 [ 0x03 ] = { cmd_request_sense, ALLOW_UA }, 1285 [ 0x12 ] = { cmd_inquiry, ALLOW_UA }, 1286 [ 0x1b ] = { cmd_start_stop_unit, NONDATA }, /* [1] */ 1287 [ 0x1e ] = { cmd_prevent_allow_medium_removal, NONDATA }, 1288 [ 0x25 ] = { cmd_read_cdvd_capacity, CHECK_READY }, 1289 [ 0x28 ] = { cmd_read, /* (10) */ CHECK_READY }, 1290 [ 0x2b ] = { cmd_seek, CHECK_READY | NONDATA }, 1291 [ 0x43 ] = { cmd_read_toc_pma_atip, CHECK_READY }, 1292 [ 0x46 ] = { cmd_get_configuration, ALLOW_UA }, 1293 [ 0x4a ] = { cmd_get_event_status_notification, ALLOW_UA }, 1294 [ 0x51 ] = { cmd_read_disc_information, CHECK_READY }, 1295 [ 0x5a ] = { cmd_mode_sense, /* (10) */ 0 }, 1296 [ 0xa8 ] = { cmd_read, /* (12) */ CHECK_READY }, 1297 [ 0xad ] = { cmd_read_dvd_structure, CHECK_READY }, 1298 [ 0xbb ] = { cmd_set_speed, NONDATA }, 1299 [ 0xbd ] = { cmd_mechanism_status, 0 }, 1300 [ 0xbe ] = { cmd_read_cd, CHECK_READY | CONDDATA }, 1301 /* [1] handler detects and reports not ready condition itself */ 1302 }; 1303 1304 void ide_atapi_cmd(IDEState *s) 1305 { 1306 uint8_t *buf = s->io_buffer; 1307 const struct AtapiCmd *cmd = &atapi_cmd_table[s->io_buffer[0]]; 1308 1309 trace_ide_atapi_cmd(s, s->io_buffer[0]); 1310 1311 if (trace_event_get_state_backends(TRACE_IDE_ATAPI_CMD_PACKET)) { 1312 /* Each pretty-printed byte needs two bytes and a space; */ 1313 char *ppacket = g_malloc(ATAPI_PACKET_SIZE * 3 + 1); 1314 int i; 1315 for (i = 0; i < ATAPI_PACKET_SIZE; i++) { 1316 sprintf(ppacket + (i * 3), "%02x ", buf[i]); 1317 } 1318 trace_ide_atapi_cmd_packet(s, s->lcyl | (s->hcyl << 8), ppacket); 1319 g_free(ppacket); 1320 } 1321 1322 /* 1323 * If there's a UNIT_ATTENTION condition pending, only command flagged with 1324 * ALLOW_UA are allowed to complete. with other commands getting a CHECK 1325 * condition response unless a higher priority status, defined by the drive 1326 * here, is pending. 1327 */ 1328 if (s->sense_key == UNIT_ATTENTION && !(cmd->flags & ALLOW_UA)) { 1329 ide_atapi_cmd_check_status(s); 1330 return; 1331 } 1332 /* 1333 * When a CD gets changed, we have to report an ejected state and 1334 * then a loaded state to guests so that they detect tray 1335 * open/close and media change events. Guests that do not use 1336 * GET_EVENT_STATUS_NOTIFICATION to detect such tray open/close 1337 * states rely on this behavior. 1338 */ 1339 if (!(cmd->flags & ALLOW_UA) && 1340 !s->tray_open && blk_is_inserted(s->blk) && s->cdrom_changed) { 1341 1342 if (s->cdrom_changed == 1) { 1343 ide_atapi_cmd_error(s, NOT_READY, ASC_MEDIUM_NOT_PRESENT); 1344 s->cdrom_changed = 2; 1345 } else { 1346 ide_atapi_cmd_error(s, UNIT_ATTENTION, ASC_MEDIUM_MAY_HAVE_CHANGED); 1347 s->cdrom_changed = 0; 1348 } 1349 1350 return; 1351 } 1352 1353 /* Report a Not Ready condition if appropriate for the command */ 1354 if ((cmd->flags & CHECK_READY) && 1355 (!media_present(s) || !blk_is_inserted(s->blk))) 1356 { 1357 ide_atapi_cmd_error(s, NOT_READY, ASC_MEDIUM_NOT_PRESENT); 1358 return; 1359 } 1360 1361 /* Commands that don't transfer DATA permit the byte_count_limit to be 0. 1362 * If this is a data-transferring PIO command and BCL is 0, 1363 * we abort at the /ATA/ level, not the ATAPI level. 1364 * See ATA8 ACS3 section 7.17.6.49 and 7.21.5 */ 1365 if (cmd->handler && !(cmd->flags & (NONDATA | CONDDATA))) { 1366 if (!validate_bcl(s)) { 1367 return; 1368 } 1369 } 1370 1371 /* Execute the command */ 1372 if (cmd->handler) { 1373 cmd->handler(s, buf); 1374 return; 1375 } 1376 1377 ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_ILLEGAL_OPCODE); 1378 } 1379