xref: /openbmc/qemu/hw/ide/atapi.c (revision 750541c4)
1 /*
2  * QEMU ATAPI Emulation
3  *
4  * Copyright (c) 2003 Fabrice Bellard
5  * Copyright (c) 2006 Openedhand Ltd.
6  *
7  * Permission is hereby granted, free of charge, to any person obtaining a copy
8  * of this software and associated documentation files (the "Software"), to deal
9  * in the Software without restriction, including without limitation the rights
10  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
11  * copies of the Software, and to permit persons to whom the Software is
12  * furnished to do so, subject to the following conditions:
13  *
14  * The above copyright notice and this permission notice shall be included in
15  * all copies or substantial portions of the Software.
16  *
17  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
18  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
19  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
20  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
21  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
22  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
23  * THE SOFTWARE.
24  */
25 
26 #include "qemu/osdep.h"
27 #include "hw/ide/internal.h"
28 #include "hw/scsi/scsi.h"
29 #include "sysemu/block-backend.h"
30 #include "trace.h"
31 
32 #define ATAPI_SECTOR_BITS (2 + BDRV_SECTOR_BITS)
33 #define ATAPI_SECTOR_SIZE (1 << ATAPI_SECTOR_BITS)
34 
35 static void ide_atapi_cmd_read_dma_cb(void *opaque, int ret);
36 
37 static void padstr8(uint8_t *buf, int buf_size, const char *src)
38 {
39     int i;
40     for(i = 0; i < buf_size; i++) {
41         if (*src)
42             buf[i] = *src++;
43         else
44             buf[i] = ' ';
45     }
46 }
47 
48 static inline void cpu_to_ube16(uint8_t *buf, int val)
49 {
50     buf[0] = val >> 8;
51     buf[1] = val & 0xff;
52 }
53 
54 static inline void cpu_to_ube32(uint8_t *buf, unsigned int val)
55 {
56     buf[0] = val >> 24;
57     buf[1] = val >> 16;
58     buf[2] = val >> 8;
59     buf[3] = val & 0xff;
60 }
61 
62 static inline int ube16_to_cpu(const uint8_t *buf)
63 {
64     return (buf[0] << 8) | buf[1];
65 }
66 
67 static inline int ube32_to_cpu(const uint8_t *buf)
68 {
69     return (buf[0] << 24) | (buf[1] << 16) | (buf[2] << 8) | buf[3];
70 }
71 
72 static void lba_to_msf(uint8_t *buf, int lba)
73 {
74     lba += 150;
75     buf[0] = (lba / 75) / 60;
76     buf[1] = (lba / 75) % 60;
77     buf[2] = lba % 75;
78 }
79 
80 static inline int media_present(IDEState *s)
81 {
82     return !s->tray_open && s->nb_sectors > 0;
83 }
84 
85 /* XXX: DVDs that could fit on a CD will be reported as a CD */
86 static inline int media_is_dvd(IDEState *s)
87 {
88     return (media_present(s) && s->nb_sectors > CD_MAX_SECTORS);
89 }
90 
91 static inline int media_is_cd(IDEState *s)
92 {
93     return (media_present(s) && s->nb_sectors <= CD_MAX_SECTORS);
94 }
95 
96 static void cd_data_to_raw(uint8_t *buf, int lba)
97 {
98     /* sync bytes */
99     buf[0] = 0x00;
100     memset(buf + 1, 0xff, 10);
101     buf[11] = 0x00;
102     buf += 12;
103     /* MSF */
104     lba_to_msf(buf, lba);
105     buf[3] = 0x01; /* mode 1 data */
106     buf += 4;
107     /* data */
108     buf += 2048;
109     /* XXX: ECC not computed */
110     memset(buf, 0, 288);
111 }
112 
113 static int
114 cd_read_sector_sync(IDEState *s)
115 {
116     int ret;
117     block_acct_start(blk_get_stats(s->blk), &s->acct,
118                      ATAPI_SECTOR_SIZE, BLOCK_ACCT_READ);
119 
120     trace_cd_read_sector_sync(s->lba);
121 
122     switch (s->cd_sector_size) {
123     case 2048:
124         ret = blk_pread(s->blk, (int64_t)s->lba << ATAPI_SECTOR_BITS,
125                         s->io_buffer, ATAPI_SECTOR_SIZE);
126         break;
127     case 2352:
128         ret = blk_pread(s->blk, (int64_t)s->lba << ATAPI_SECTOR_BITS,
129                         s->io_buffer + 16, ATAPI_SECTOR_SIZE);
130         if (ret >= 0) {
131             cd_data_to_raw(s->io_buffer, s->lba);
132         }
133         break;
134     default:
135         block_acct_invalid(blk_get_stats(s->blk), BLOCK_ACCT_READ);
136         return -EIO;
137     }
138 
139     if (ret < 0) {
140         block_acct_failed(blk_get_stats(s->blk), &s->acct);
141     } else {
142         block_acct_done(blk_get_stats(s->blk), &s->acct);
143         s->lba++;
144         s->io_buffer_index = 0;
145     }
146 
147     return ret;
148 }
149 
150 static void cd_read_sector_cb(void *opaque, int ret)
151 {
152     IDEState *s = opaque;
153 
154     trace_cd_read_sector_cb(s->lba, ret);
155 
156     if (ret < 0) {
157         block_acct_failed(blk_get_stats(s->blk), &s->acct);
158         ide_atapi_io_error(s, ret);
159         return;
160     }
161 
162     block_acct_done(blk_get_stats(s->blk), &s->acct);
163 
164     if (s->cd_sector_size == 2352) {
165         cd_data_to_raw(s->io_buffer, s->lba);
166     }
167 
168     s->lba++;
169     s->io_buffer_index = 0;
170     s->status &= ~BUSY_STAT;
171 
172     ide_atapi_cmd_reply_end(s);
173 }
174 
175 static int cd_read_sector(IDEState *s)
176 {
177     void *buf;
178 
179     if (s->cd_sector_size != 2048 && s->cd_sector_size != 2352) {
180         block_acct_invalid(blk_get_stats(s->blk), BLOCK_ACCT_READ);
181         return -EINVAL;
182     }
183 
184     buf = (s->cd_sector_size == 2352) ? s->io_buffer + 16 : s->io_buffer;
185     qemu_iovec_init_buf(&s->qiov, buf, ATAPI_SECTOR_SIZE);
186 
187     trace_cd_read_sector(s->lba);
188 
189     block_acct_start(blk_get_stats(s->blk), &s->acct,
190                      ATAPI_SECTOR_SIZE, BLOCK_ACCT_READ);
191 
192     ide_buffered_readv(s, (int64_t)s->lba << 2, &s->qiov, 4,
193                        cd_read_sector_cb, s);
194 
195     s->status |= BUSY_STAT;
196     return 0;
197 }
198 
199 void ide_atapi_cmd_ok(IDEState *s)
200 {
201     s->error = 0;
202     s->status = READY_STAT | SEEK_STAT;
203     s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD;
204     ide_transfer_stop(s);
205     ide_set_irq(s->bus);
206 }
207 
208 void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc)
209 {
210     trace_ide_atapi_cmd_error(s, sense_key, asc);
211     s->error = sense_key << 4;
212     s->status = READY_STAT | ERR_STAT;
213     s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD;
214     s->sense_key = sense_key;
215     s->asc = asc;
216     ide_transfer_stop(s);
217     ide_set_irq(s->bus);
218 }
219 
220 void ide_atapi_io_error(IDEState *s, int ret)
221 {
222     /* XXX: handle more errors */
223     if (ret == -ENOMEDIUM) {
224         ide_atapi_cmd_error(s, NOT_READY,
225                             ASC_MEDIUM_NOT_PRESENT);
226     } else {
227         ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
228                             ASC_LOGICAL_BLOCK_OOR);
229     }
230 }
231 
232 static uint16_t atapi_byte_count_limit(IDEState *s)
233 {
234     uint16_t bcl;
235 
236     bcl = s->lcyl | (s->hcyl << 8);
237     if (bcl == 0xffff) {
238         return 0xfffe;
239     }
240     return bcl;
241 }
242 
243 /* The whole ATAPI transfer logic is handled in this function */
244 void ide_atapi_cmd_reply_end(IDEState *s)
245 {
246     int byte_count_limit, size, ret;
247     while (s->packet_transfer_size > 0) {
248         trace_ide_atapi_cmd_reply_end(s, s->packet_transfer_size,
249                                       s->elementary_transfer_size,
250                                       s->io_buffer_index);
251 
252         /* see if a new sector must be read */
253         if (s->lba != -1 && s->io_buffer_index >= s->cd_sector_size) {
254             if (!s->elementary_transfer_size) {
255                 ret = cd_read_sector(s);
256                 if (ret < 0) {
257                     ide_atapi_io_error(s, ret);
258                 }
259                 return;
260             } else {
261                 /* rebuffering within an elementary transfer is
262                  * only possible with a sync request because we
263                  * end up with a race condition otherwise */
264                 ret = cd_read_sector_sync(s);
265                 if (ret < 0) {
266                     ide_atapi_io_error(s, ret);
267                     return;
268                 }
269             }
270         }
271         if (s->elementary_transfer_size > 0) {
272             /* there are some data left to transmit in this elementary
273                transfer */
274             size = s->cd_sector_size - s->io_buffer_index;
275             if (size > s->elementary_transfer_size)
276                 size = s->elementary_transfer_size;
277         } else {
278             /* a new transfer is needed */
279             s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO;
280             ide_set_irq(s->bus);
281             byte_count_limit = atapi_byte_count_limit(s);
282             trace_ide_atapi_cmd_reply_end_bcl(s, byte_count_limit);
283             size = s->packet_transfer_size;
284             if (size > byte_count_limit) {
285                 /* byte count limit must be even if this case */
286                 if (byte_count_limit & 1)
287                     byte_count_limit--;
288                 size = byte_count_limit;
289             }
290             s->lcyl = size;
291             s->hcyl = size >> 8;
292             s->elementary_transfer_size = size;
293             /* we cannot transmit more than one sector at a time */
294             if (s->lba != -1) {
295                 if (size > (s->cd_sector_size - s->io_buffer_index))
296                     size = (s->cd_sector_size - s->io_buffer_index);
297             }
298             trace_ide_atapi_cmd_reply_end_new(s, s->status);
299         }
300         s->packet_transfer_size -= size;
301         s->elementary_transfer_size -= size;
302         s->io_buffer_index += size;
303 
304         /* Some adapters process PIO data right away.  In that case, we need
305          * to avoid mutual recursion between ide_transfer_start
306          * and ide_atapi_cmd_reply_end.
307          */
308         if (!ide_transfer_start_norecurse(s,
309                                           s->io_buffer + s->io_buffer_index - size,
310                                           size, ide_atapi_cmd_reply_end)) {
311             return;
312         }
313     }
314 
315     /* end of transfer */
316     trace_ide_atapi_cmd_reply_end_eot(s, s->status);
317     ide_atapi_cmd_ok(s);
318     ide_set_irq(s->bus);
319 }
320 
321 /* send a reply of 'size' bytes in s->io_buffer to an ATAPI command */
322 static void ide_atapi_cmd_reply(IDEState *s, int size, int max_size)
323 {
324     if (size > max_size)
325         size = max_size;
326     s->lba = -1; /* no sector read */
327     s->packet_transfer_size = size;
328     s->io_buffer_size = size;    /* dma: send the reply data as one chunk */
329     s->elementary_transfer_size = 0;
330 
331     if (s->atapi_dma) {
332         block_acct_start(blk_get_stats(s->blk), &s->acct, size,
333                          BLOCK_ACCT_READ);
334         s->status = READY_STAT | SEEK_STAT | DRQ_STAT;
335         ide_start_dma(s, ide_atapi_cmd_read_dma_cb);
336     } else {
337         s->status = READY_STAT | SEEK_STAT;
338         s->io_buffer_index = 0;
339         ide_atapi_cmd_reply_end(s);
340     }
341 }
342 
343 /* start a CD-CDROM read command */
344 static void ide_atapi_cmd_read_pio(IDEState *s, int lba, int nb_sectors,
345                                    int sector_size)
346 {
347     s->lba = lba;
348     s->packet_transfer_size = nb_sectors * sector_size;
349     s->elementary_transfer_size = 0;
350     s->io_buffer_index = sector_size;
351     s->cd_sector_size = sector_size;
352 
353     ide_atapi_cmd_reply_end(s);
354 }
355 
356 static void ide_atapi_cmd_check_status(IDEState *s)
357 {
358     trace_ide_atapi_cmd_check_status(s);
359     s->error = MC_ERR | (UNIT_ATTENTION << 4);
360     s->status = ERR_STAT;
361     s->nsector = 0;
362     ide_set_irq(s->bus);
363 }
364 /* ATAPI DMA support */
365 
366 static void ide_atapi_cmd_read_dma_cb(void *opaque, int ret)
367 {
368     IDEState *s = opaque;
369     int data_offset, n;
370 
371     if (ret < 0) {
372         if (ide_handle_rw_error(s, -ret, ide_dma_cmd_to_retry(s->dma_cmd))) {
373             if (s->bus->error_status) {
374                 s->bus->dma->aiocb = NULL;
375                 return;
376             }
377             goto eot;
378         }
379     }
380 
381     if (s->io_buffer_size > 0) {
382         /*
383          * For a cdrom read sector command (s->lba != -1),
384          * adjust the lba for the next s->io_buffer_size chunk
385          * and dma the current chunk.
386          * For a command != read (s->lba == -1), just transfer
387          * the reply data.
388          */
389         if (s->lba != -1) {
390             if (s->cd_sector_size == 2352) {
391                 n = 1;
392                 cd_data_to_raw(s->io_buffer, s->lba);
393             } else {
394                 n = s->io_buffer_size >> 11;
395             }
396             s->lba += n;
397         }
398         s->packet_transfer_size -= s->io_buffer_size;
399         if (s->bus->dma->ops->rw_buf(s->bus->dma, 1) == 0)
400             goto eot;
401     }
402 
403     if (s->packet_transfer_size <= 0) {
404         s->status = READY_STAT | SEEK_STAT;
405         s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD;
406         ide_set_irq(s->bus);
407         goto eot;
408     }
409 
410     s->io_buffer_index = 0;
411     if (s->cd_sector_size == 2352) {
412         n = 1;
413         s->io_buffer_size = s->cd_sector_size;
414         data_offset = 16;
415     } else {
416         n = s->packet_transfer_size >> 11;
417         if (n > (IDE_DMA_BUF_SECTORS / 4))
418             n = (IDE_DMA_BUF_SECTORS / 4);
419         s->io_buffer_size = n * 2048;
420         data_offset = 0;
421     }
422     trace_ide_atapi_cmd_read_dma_cb_aio(s, s->lba, n);
423     qemu_iovec_init_buf(&s->bus->dma->qiov, s->io_buffer + data_offset,
424                         n * ATAPI_SECTOR_SIZE);
425 
426     s->bus->dma->aiocb = ide_buffered_readv(s, (int64_t)s->lba << 2,
427                                             &s->bus->dma->qiov, n * 4,
428                                             ide_atapi_cmd_read_dma_cb, s);
429     return;
430 
431 eot:
432     if (ret < 0) {
433         block_acct_failed(blk_get_stats(s->blk), &s->acct);
434     } else {
435         block_acct_done(blk_get_stats(s->blk), &s->acct);
436     }
437     ide_set_inactive(s, false);
438 }
439 
440 /* start a CD-CDROM read command with DMA */
441 /* XXX: test if DMA is available */
442 static void ide_atapi_cmd_read_dma(IDEState *s, int lba, int nb_sectors,
443                                    int sector_size)
444 {
445     s->lba = lba;
446     s->packet_transfer_size = nb_sectors * sector_size;
447     s->io_buffer_size = 0;
448     s->cd_sector_size = sector_size;
449 
450     block_acct_start(blk_get_stats(s->blk), &s->acct, s->packet_transfer_size,
451                      BLOCK_ACCT_READ);
452 
453     /* XXX: check if BUSY_STAT should be set */
454     s->status = READY_STAT | SEEK_STAT | DRQ_STAT | BUSY_STAT;
455     ide_start_dma(s, ide_atapi_cmd_read_dma_cb);
456 }
457 
458 static void ide_atapi_cmd_read(IDEState *s, int lba, int nb_sectors,
459                                int sector_size)
460 {
461     trace_ide_atapi_cmd_read(s, s->atapi_dma ? "dma" : "pio",
462                              lba, nb_sectors);
463     if (s->atapi_dma) {
464         ide_atapi_cmd_read_dma(s, lba, nb_sectors, sector_size);
465     } else {
466         ide_atapi_cmd_read_pio(s, lba, nb_sectors, sector_size);
467     }
468 }
469 
470 void ide_atapi_dma_restart(IDEState *s)
471 {
472     /*
473      * At this point we can just re-evaluate the packet command and start over.
474      * The presence of ->dma_cb callback in the pre_save ensures that the packet
475      * command has been completely sent and we can safely restart command.
476      */
477     s->unit = s->bus->retry_unit;
478     s->bus->dma->ops->restart_dma(s->bus->dma);
479     ide_atapi_cmd(s);
480 }
481 
482 static inline uint8_t ide_atapi_set_profile(uint8_t *buf, uint8_t *index,
483                                             uint16_t profile)
484 {
485     uint8_t *buf_profile = buf + 12; /* start of profiles */
486 
487     buf_profile += ((*index) * 4); /* start of indexed profile */
488     cpu_to_ube16 (buf_profile, profile);
489     buf_profile[2] = ((buf_profile[0] == buf[6]) && (buf_profile[1] == buf[7]));
490 
491     /* each profile adds 4 bytes to the response */
492     (*index)++;
493     buf[11] += 4; /* Additional Length */
494 
495     return 4;
496 }
497 
498 static int ide_dvd_read_structure(IDEState *s, int format,
499                                   const uint8_t *packet, uint8_t *buf)
500 {
501     switch (format) {
502         case 0x0: /* Physical format information */
503             {
504                 int layer = packet[6];
505                 uint64_t total_sectors;
506 
507                 if (layer != 0)
508                     return -ASC_INV_FIELD_IN_CMD_PACKET;
509 
510                 total_sectors = s->nb_sectors >> 2;
511                 if (total_sectors == 0) {
512                     return -ASC_MEDIUM_NOT_PRESENT;
513                 }
514 
515                 buf[4] = 1;   /* DVD-ROM, part version 1 */
516                 buf[5] = 0xf; /* 120mm disc, minimum rate unspecified */
517                 buf[6] = 1;   /* one layer, read-only (per MMC-2 spec) */
518                 buf[7] = 0;   /* default densities */
519 
520                 /* FIXME: 0x30000 per spec? */
521                 cpu_to_ube32(buf + 8, 0); /* start sector */
522                 cpu_to_ube32(buf + 12, total_sectors - 1); /* end sector */
523                 cpu_to_ube32(buf + 16, total_sectors - 1); /* l0 end sector */
524 
525                 /* Size of buffer, not including 2 byte size field */
526                 stw_be_p(buf, 2048 + 2);
527 
528                 /* 2k data + 4 byte header */
529                 return (2048 + 4);
530             }
531 
532         case 0x01: /* DVD copyright information */
533             buf[4] = 0; /* no copyright data */
534             buf[5] = 0; /* no region restrictions */
535 
536             /* Size of buffer, not including 2 byte size field */
537             stw_be_p(buf, 4 + 2);
538 
539             /* 4 byte header + 4 byte data */
540             return (4 + 4);
541 
542         case 0x03: /* BCA information - invalid field for no BCA info */
543             return -ASC_INV_FIELD_IN_CMD_PACKET;
544 
545         case 0x04: /* DVD disc manufacturing information */
546             /* Size of buffer, not including 2 byte size field */
547             stw_be_p(buf, 2048 + 2);
548 
549             /* 2k data + 4 byte header */
550             return (2048 + 4);
551 
552         case 0xff:
553             /*
554              * This lists all the command capabilities above.  Add new ones
555              * in order and update the length and buffer return values.
556              */
557 
558             buf[4] = 0x00; /* Physical format */
559             buf[5] = 0x40; /* Not writable, is readable */
560             stw_be_p(buf + 6, 2048 + 4);
561 
562             buf[8] = 0x01; /* Copyright info */
563             buf[9] = 0x40; /* Not writable, is readable */
564             stw_be_p(buf + 10, 4 + 4);
565 
566             buf[12] = 0x03; /* BCA info */
567             buf[13] = 0x40; /* Not writable, is readable */
568             stw_be_p(buf + 14, 188 + 4);
569 
570             buf[16] = 0x04; /* Manufacturing info */
571             buf[17] = 0x40; /* Not writable, is readable */
572             stw_be_p(buf + 18, 2048 + 4);
573 
574             /* Size of buffer, not including 2 byte size field */
575             stw_be_p(buf, 16 + 2);
576 
577             /* data written + 4 byte header */
578             return (16 + 4);
579 
580         default: /* TODO: formats beyond DVD-ROM requires */
581             return -ASC_INV_FIELD_IN_CMD_PACKET;
582     }
583 }
584 
585 static unsigned int event_status_media(IDEState *s,
586                                        uint8_t *buf)
587 {
588     uint8_t event_code, media_status;
589 
590     media_status = 0;
591     if (s->tray_open) {
592         media_status = MS_TRAY_OPEN;
593     } else if (blk_is_inserted(s->blk)) {
594         media_status = MS_MEDIA_PRESENT;
595     }
596 
597     /* Event notification descriptor */
598     event_code = MEC_NO_CHANGE;
599     if (media_status != MS_TRAY_OPEN) {
600         if (s->events.new_media) {
601             event_code = MEC_NEW_MEDIA;
602             s->events.new_media = false;
603         } else if (s->events.eject_request) {
604             event_code = MEC_EJECT_REQUESTED;
605             s->events.eject_request = false;
606         }
607     }
608 
609     buf[4] = event_code;
610     buf[5] = media_status;
611 
612     /* These fields are reserved, just clear them. */
613     buf[6] = 0;
614     buf[7] = 0;
615 
616     return 8; /* We wrote to 4 extra bytes from the header */
617 }
618 
619 /*
620  * Before transferring data or otherwise signalling acceptance of a command
621  * marked CONDDATA, we must check the validity of the byte_count_limit.
622  */
623 static bool validate_bcl(IDEState *s)
624 {
625     /* TODO: Check IDENTIFY data word 125 for defacult BCL (currently 0) */
626     if (s->atapi_dma || atapi_byte_count_limit(s)) {
627         return true;
628     }
629 
630     /* TODO: Move abort back into core.c and introduce proper error flow between
631      *       ATAPI layer and IDE core layer */
632     ide_abort_command(s);
633     return false;
634 }
635 
636 static void cmd_get_event_status_notification(IDEState *s,
637                                               uint8_t *buf)
638 {
639     const uint8_t *packet = buf;
640 
641     struct {
642         uint8_t opcode;
643         uint8_t polled;        /* lsb bit is polled; others are reserved */
644         uint8_t reserved2[2];
645         uint8_t class;
646         uint8_t reserved3[2];
647         uint16_t len;
648         uint8_t control;
649     } QEMU_PACKED *gesn_cdb;
650 
651     struct {
652         uint16_t len;
653         uint8_t notification_class;
654         uint8_t supported_events;
655     } QEMU_PACKED *gesn_event_header;
656     unsigned int max_len, used_len;
657 
658     gesn_cdb = (void *)packet;
659     gesn_event_header = (void *)buf;
660 
661     max_len = be16_to_cpu(gesn_cdb->len);
662 
663     /* It is fine by the MMC spec to not support async mode operations */
664     if (!(gesn_cdb->polled & 0x01)) { /* asynchronous mode */
665         /* Only polling is supported, asynchronous mode is not. */
666         ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
667                             ASC_INV_FIELD_IN_CMD_PACKET);
668         return;
669     }
670 
671     /* polling mode operation */
672 
673     /*
674      * These are the supported events.
675      *
676      * We currently only support requests of the 'media' type.
677      * Notification class requests and supported event classes are bitmasks,
678      * but they are build from the same values as the "notification class"
679      * field.
680      */
681     gesn_event_header->supported_events = 1 << GESN_MEDIA;
682 
683     /*
684      * We use |= below to set the class field; other bits in this byte
685      * are reserved now but this is useful to do if we have to use the
686      * reserved fields later.
687      */
688     gesn_event_header->notification_class = 0;
689 
690     /*
691      * Responses to requests are to be based on request priority.  The
692      * notification_class_request_type enum above specifies the
693      * priority: upper elements are higher prio than lower ones.
694      */
695     if (gesn_cdb->class & (1 << GESN_MEDIA)) {
696         gesn_event_header->notification_class |= GESN_MEDIA;
697         used_len = event_status_media(s, buf);
698     } else {
699         gesn_event_header->notification_class = 0x80; /* No event available */
700         used_len = sizeof(*gesn_event_header);
701     }
702     gesn_event_header->len = cpu_to_be16(used_len
703                                          - sizeof(*gesn_event_header));
704     ide_atapi_cmd_reply(s, used_len, max_len);
705 }
706 
707 static void cmd_request_sense(IDEState *s, uint8_t *buf)
708 {
709     int max_len = buf[4];
710 
711     memset(buf, 0, 18);
712     buf[0] = 0x70 | (1 << 7);
713     buf[2] = s->sense_key;
714     buf[7] = 10;
715     buf[12] = s->asc;
716 
717     if (s->sense_key == UNIT_ATTENTION) {
718         s->sense_key = NO_SENSE;
719     }
720 
721     ide_atapi_cmd_reply(s, 18, max_len);
722 }
723 
724 static void cmd_inquiry(IDEState *s, uint8_t *buf)
725 {
726     uint8_t page_code = buf[2];
727     int max_len = buf[4];
728 
729     unsigned idx = 0;
730     unsigned size_idx;
731     unsigned preamble_len;
732 
733     /* If the EVPD (Enable Vital Product Data) bit is set in byte 1,
734      * we are being asked for a specific page of info indicated by byte 2. */
735     if (buf[1] & 0x01) {
736         preamble_len = 4;
737         size_idx = 3;
738 
739         buf[idx++] = 0x05;      /* CD-ROM */
740         buf[idx++] = page_code; /* Page Code */
741         buf[idx++] = 0x00;      /* reserved */
742         idx++;                  /* length (set later) */
743 
744         switch (page_code) {
745         case 0x00:
746             /* Supported Pages: List of supported VPD responses. */
747             buf[idx++] = 0x00; /* 0x00: Supported Pages, and: */
748             buf[idx++] = 0x83; /* 0x83: Device Identification. */
749             break;
750 
751         case 0x83:
752             /* Device Identification. Each entry is optional, but the entries
753              * included here are modeled after libata's VPD responses.
754              * If the response is given, at least one entry must be present. */
755 
756             /* Entry 1: Serial */
757             if (idx + 24 > max_len) {
758                 /* Not enough room for even the first entry: */
759                 /* 4 byte header + 20 byte string */
760                 ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
761                                     ASC_DATA_PHASE_ERROR);
762                 return;
763             }
764             buf[idx++] = 0x02; /* Ascii */
765             buf[idx++] = 0x00; /* Vendor Specific */
766             buf[idx++] = 0x00;
767             buf[idx++] = 20;   /* Remaining length */
768             padstr8(buf + idx, 20, s->drive_serial_str);
769             idx += 20;
770 
771             /* Entry 2: Drive Model and Serial */
772             if (idx + 72 > max_len) {
773                 /* 4 (header) + 8 (vendor) + 60 (model & serial) */
774                 goto out;
775             }
776             buf[idx++] = 0x02; /* Ascii */
777             buf[idx++] = 0x01; /* T10 Vendor */
778             buf[idx++] = 0x00;
779             buf[idx++] = 68;
780             padstr8(buf + idx, 8, "ATA"); /* Generic T10 vendor */
781             idx += 8;
782             padstr8(buf + idx, 40, s->drive_model_str);
783             idx += 40;
784             padstr8(buf + idx, 20, s->drive_serial_str);
785             idx += 20;
786 
787             /* Entry 3: WWN */
788             if (s->wwn && (idx + 12 <= max_len)) {
789                 /* 4 byte header + 8 byte wwn */
790                 buf[idx++] = 0x01; /* Binary */
791                 buf[idx++] = 0x03; /* NAA */
792                 buf[idx++] = 0x00;
793                 buf[idx++] = 0x08;
794                 stq_be_p(&buf[idx], s->wwn);
795                 idx += 8;
796             }
797             break;
798 
799         default:
800             /* SPC-3, revision 23 sec. 6.4 */
801             ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
802                                 ASC_INV_FIELD_IN_CMD_PACKET);
803             return;
804         }
805     } else {
806         preamble_len = 5;
807         size_idx = 4;
808 
809         buf[0] = 0x05; /* CD-ROM */
810         buf[1] = 0x80; /* removable */
811         buf[2] = 0x00; /* ISO */
812         buf[3] = 0x21; /* ATAPI-2 (XXX: put ATAPI-4 ?) */
813         /* buf[size_idx] set below. */
814         buf[5] = 0;    /* reserved */
815         buf[6] = 0;    /* reserved */
816         buf[7] = 0;    /* reserved */
817         padstr8(buf + 8, 8, "QEMU");
818         padstr8(buf + 16, 16, "QEMU DVD-ROM");
819         padstr8(buf + 32, 4, s->version);
820         idx = 36;
821     }
822 
823  out:
824     buf[size_idx] = idx - preamble_len;
825     ide_atapi_cmd_reply(s, idx, max_len);
826 }
827 
828 static void cmd_get_configuration(IDEState *s, uint8_t *buf)
829 {
830     uint32_t len;
831     uint8_t index = 0;
832     int max_len;
833 
834     /* only feature 0 is supported */
835     if (buf[2] != 0 || buf[3] != 0) {
836         ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
837                             ASC_INV_FIELD_IN_CMD_PACKET);
838         return;
839     }
840 
841     /* XXX: could result in alignment problems in some architectures */
842     max_len = ube16_to_cpu(buf + 7);
843 
844     /*
845      * XXX: avoid overflow for io_buffer if max_len is bigger than
846      *      the size of that buffer (dimensioned to max number of
847      *      sectors to transfer at once)
848      *
849      *      Only a problem if the feature/profiles grow.
850      */
851     if (max_len > 512) {
852         /* XXX: assume 1 sector */
853         max_len = 512;
854     }
855 
856     memset(buf, 0, max_len);
857     /*
858      * the number of sectors from the media tells us which profile
859      * to use as current.  0 means there is no media
860      */
861     if (media_is_dvd(s)) {
862         cpu_to_ube16(buf + 6, MMC_PROFILE_DVD_ROM);
863     } else if (media_is_cd(s)) {
864         cpu_to_ube16(buf + 6, MMC_PROFILE_CD_ROM);
865     }
866 
867     buf[10] = 0x02 | 0x01; /* persistent and current */
868     len = 12; /* headers: 8 + 4 */
869     len += ide_atapi_set_profile(buf, &index, MMC_PROFILE_DVD_ROM);
870     len += ide_atapi_set_profile(buf, &index, MMC_PROFILE_CD_ROM);
871     cpu_to_ube32(buf, len - 4); /* data length */
872 
873     ide_atapi_cmd_reply(s, len, max_len);
874 }
875 
876 static void cmd_mode_sense(IDEState *s, uint8_t *buf)
877 {
878     int action, code;
879     int max_len;
880 
881     max_len = ube16_to_cpu(buf + 7);
882     action = buf[2] >> 6;
883     code = buf[2] & 0x3f;
884 
885     switch(action) {
886     case 0: /* current values */
887         switch(code) {
888         case MODE_PAGE_R_W_ERROR: /* error recovery */
889             cpu_to_ube16(&buf[0], 16 - 2);
890             buf[2] = 0x70;
891             buf[3] = 0;
892             buf[4] = 0;
893             buf[5] = 0;
894             buf[6] = 0;
895             buf[7] = 0;
896 
897             buf[8] = MODE_PAGE_R_W_ERROR;
898             buf[9] = 16 - 10;
899             buf[10] = 0x00;
900             buf[11] = 0x05;
901             buf[12] = 0x00;
902             buf[13] = 0x00;
903             buf[14] = 0x00;
904             buf[15] = 0x00;
905             ide_atapi_cmd_reply(s, 16, max_len);
906             break;
907         case MODE_PAGE_AUDIO_CTL:
908             cpu_to_ube16(&buf[0], 24 - 2);
909             buf[2] = 0x70;
910             buf[3] = 0;
911             buf[4] = 0;
912             buf[5] = 0;
913             buf[6] = 0;
914             buf[7] = 0;
915 
916             buf[8] = MODE_PAGE_AUDIO_CTL;
917             buf[9] = 24 - 10;
918             /* Fill with CDROM audio volume */
919             buf[17] = 0;
920             buf[19] = 0;
921             buf[21] = 0;
922             buf[23] = 0;
923 
924             ide_atapi_cmd_reply(s, 24, max_len);
925             break;
926         case MODE_PAGE_CAPABILITIES:
927             cpu_to_ube16(&buf[0], 30 - 2);
928             buf[2] = 0x70;
929             buf[3] = 0;
930             buf[4] = 0;
931             buf[5] = 0;
932             buf[6] = 0;
933             buf[7] = 0;
934 
935             buf[8] = MODE_PAGE_CAPABILITIES;
936             buf[9] = 30 - 10;
937             buf[10] = 0x3b; /* read CDR/CDRW/DVDROM/DVDR/DVDRAM */
938             buf[11] = 0x00;
939 
940             /* Claim PLAY_AUDIO capability (0x01) since some Linux
941                code checks for this to automount media. */
942             buf[12] = 0x71;
943             buf[13] = 3 << 5;
944             buf[14] = (1 << 0) | (1 << 3) | (1 << 5);
945             if (s->tray_locked) {
946                 buf[14] |= 1 << 1;
947             }
948             buf[15] = 0x00; /* No volume & mute control, no changer */
949             cpu_to_ube16(&buf[16], 704); /* 4x read speed */
950             buf[18] = 0; /* Two volume levels */
951             buf[19] = 2;
952             cpu_to_ube16(&buf[20], 512); /* 512k buffer */
953             cpu_to_ube16(&buf[22], 704); /* 4x read speed current */
954             buf[24] = 0;
955             buf[25] = 0;
956             buf[26] = 0;
957             buf[27] = 0;
958             buf[28] = 0;
959             buf[29] = 0;
960             ide_atapi_cmd_reply(s, 30, max_len);
961             break;
962         default:
963             goto error_cmd;
964         }
965         break;
966     case 1: /* changeable values */
967         goto error_cmd;
968     case 2: /* default values */
969         goto error_cmd;
970     default:
971     case 3: /* saved values */
972         ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
973                             ASC_SAVING_PARAMETERS_NOT_SUPPORTED);
974         break;
975     }
976     return;
977 
978 error_cmd:
979     ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_INV_FIELD_IN_CMD_PACKET);
980 }
981 
982 static void cmd_test_unit_ready(IDEState *s, uint8_t *buf)
983 {
984     /* Not Ready Conditions are already handled in ide_atapi_cmd(), so if we
985      * come here, we know that it's ready. */
986     ide_atapi_cmd_ok(s);
987 }
988 
989 static void cmd_prevent_allow_medium_removal(IDEState *s, uint8_t* buf)
990 {
991     s->tray_locked = buf[4] & 1;
992     blk_lock_medium(s->blk, buf[4] & 1);
993     ide_atapi_cmd_ok(s);
994 }
995 
996 static void cmd_read(IDEState *s, uint8_t* buf)
997 {
998     int nb_sectors, lba;
999 
1000     if (buf[0] == GPCMD_READ_10) {
1001         nb_sectors = ube16_to_cpu(buf + 7);
1002     } else {
1003         nb_sectors = ube32_to_cpu(buf + 6);
1004     }
1005 
1006     lba = ube32_to_cpu(buf + 2);
1007     if (nb_sectors == 0) {
1008         ide_atapi_cmd_ok(s);
1009         return;
1010     }
1011 
1012     ide_atapi_cmd_read(s, lba, nb_sectors, 2048);
1013 }
1014 
1015 static void cmd_read_cd(IDEState *s, uint8_t* buf)
1016 {
1017     int nb_sectors, lba, transfer_request;
1018 
1019     nb_sectors = (buf[6] << 16) | (buf[7] << 8) | buf[8];
1020     lba = ube32_to_cpu(buf + 2);
1021 
1022     if (nb_sectors == 0) {
1023         ide_atapi_cmd_ok(s);
1024         return;
1025     }
1026 
1027     transfer_request = buf[9] & 0xf8;
1028     if (transfer_request == 0x00) {
1029         /* nothing */
1030         ide_atapi_cmd_ok(s);
1031         return;
1032     }
1033 
1034     /* Check validity of BCL before transferring data */
1035     if (!validate_bcl(s)) {
1036         return;
1037     }
1038 
1039     switch (transfer_request) {
1040     case 0x10:
1041         /* normal read */
1042         ide_atapi_cmd_read(s, lba, nb_sectors, 2048);
1043         break;
1044     case 0xf8:
1045         /* read all data */
1046         ide_atapi_cmd_read(s, lba, nb_sectors, 2352);
1047         break;
1048     default:
1049         ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
1050                             ASC_INV_FIELD_IN_CMD_PACKET);
1051         break;
1052     }
1053 }
1054 
1055 static void cmd_seek(IDEState *s, uint8_t* buf)
1056 {
1057     unsigned int lba;
1058     uint64_t total_sectors = s->nb_sectors >> 2;
1059 
1060     lba = ube32_to_cpu(buf + 2);
1061     if (lba >= total_sectors) {
1062         ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_LOGICAL_BLOCK_OOR);
1063         return;
1064     }
1065 
1066     ide_atapi_cmd_ok(s);
1067 }
1068 
1069 static void cmd_start_stop_unit(IDEState *s, uint8_t* buf)
1070 {
1071     int sense;
1072     bool start = buf[4] & 1;
1073     bool loej = buf[4] & 2;     /* load on start, eject on !start */
1074     int pwrcnd = buf[4] & 0xf0;
1075 
1076     if (pwrcnd) {
1077         /* eject/load only happens for power condition == 0 */
1078         ide_atapi_cmd_ok(s);
1079         return;
1080     }
1081 
1082     if (loej) {
1083         if (!start && !s->tray_open && s->tray_locked) {
1084             sense = blk_is_inserted(s->blk)
1085                 ? NOT_READY : ILLEGAL_REQUEST;
1086             ide_atapi_cmd_error(s, sense, ASC_MEDIA_REMOVAL_PREVENTED);
1087             return;
1088         }
1089 
1090         if (s->tray_open != !start) {
1091             blk_eject(s->blk, !start);
1092             s->tray_open = !start;
1093         }
1094     }
1095 
1096     ide_atapi_cmd_ok(s);
1097 }
1098 
1099 static void cmd_mechanism_status(IDEState *s, uint8_t* buf)
1100 {
1101     int max_len = ube16_to_cpu(buf + 8);
1102 
1103     cpu_to_ube16(buf, 0);
1104     /* no current LBA */
1105     buf[2] = 0;
1106     buf[3] = 0;
1107     buf[4] = 0;
1108     buf[5] = 1;
1109     cpu_to_ube16(buf + 6, 0);
1110     ide_atapi_cmd_reply(s, 8, max_len);
1111 }
1112 
1113 static void cmd_read_toc_pma_atip(IDEState *s, uint8_t* buf)
1114 {
1115     int format, msf, start_track, len;
1116     int max_len;
1117     uint64_t total_sectors = s->nb_sectors >> 2;
1118 
1119     max_len = ube16_to_cpu(buf + 7);
1120     format = buf[9] >> 6;
1121     msf = (buf[1] >> 1) & 1;
1122     start_track = buf[6];
1123 
1124     switch(format) {
1125     case 0:
1126         len = cdrom_read_toc(total_sectors, buf, msf, start_track);
1127         if (len < 0)
1128             goto error_cmd;
1129         ide_atapi_cmd_reply(s, len, max_len);
1130         break;
1131     case 1:
1132         /* multi session : only a single session defined */
1133         memset(buf, 0, 12);
1134         buf[1] = 0x0a;
1135         buf[2] = 0x01;
1136         buf[3] = 0x01;
1137         ide_atapi_cmd_reply(s, 12, max_len);
1138         break;
1139     case 2:
1140         len = cdrom_read_toc_raw(total_sectors, buf, msf, start_track);
1141         if (len < 0)
1142             goto error_cmd;
1143         ide_atapi_cmd_reply(s, len, max_len);
1144         break;
1145     default:
1146     error_cmd:
1147         ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
1148                             ASC_INV_FIELD_IN_CMD_PACKET);
1149     }
1150 }
1151 
1152 static void cmd_read_cdvd_capacity(IDEState *s, uint8_t* buf)
1153 {
1154     uint64_t total_sectors = s->nb_sectors >> 2;
1155 
1156     /* NOTE: it is really the number of sectors minus 1 */
1157     cpu_to_ube32(buf, total_sectors - 1);
1158     cpu_to_ube32(buf + 4, 2048);
1159     ide_atapi_cmd_reply(s, 8, 8);
1160 }
1161 
1162 static void cmd_read_disc_information(IDEState *s, uint8_t* buf)
1163 {
1164     uint8_t type = buf[1] & 7;
1165     uint32_t max_len = ube16_to_cpu(buf + 7);
1166 
1167     /* Types 1/2 are only defined for Blu-Ray.  */
1168     if (type != 0) {
1169         ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
1170                             ASC_INV_FIELD_IN_CMD_PACKET);
1171         return;
1172     }
1173 
1174     memset(buf, 0, 34);
1175     buf[1] = 32;
1176     buf[2] = 0xe; /* last session complete, disc finalized */
1177     buf[3] = 1;   /* first track on disc */
1178     buf[4] = 1;   /* # of sessions */
1179     buf[5] = 1;   /* first track of last session */
1180     buf[6] = 1;   /* last track of last session */
1181     buf[7] = 0x20; /* unrestricted use */
1182     buf[8] = 0x00; /* CD-ROM or DVD-ROM */
1183     /* 9-10-11: most significant byte corresponding bytes 4-5-6 */
1184     /* 12-23: not meaningful for CD-ROM or DVD-ROM */
1185     /* 24-31: disc bar code */
1186     /* 32: disc application code */
1187     /* 33: number of OPC tables */
1188 
1189     ide_atapi_cmd_reply(s, 34, max_len);
1190 }
1191 
1192 static void cmd_read_dvd_structure(IDEState *s, uint8_t* buf)
1193 {
1194     int max_len;
1195     int media = buf[1];
1196     int format = buf[7];
1197     int ret;
1198 
1199     max_len = ube16_to_cpu(buf + 8);
1200 
1201     if (format < 0xff) {
1202         if (media_is_cd(s)) {
1203             ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
1204                                 ASC_INCOMPATIBLE_FORMAT);
1205             return;
1206         } else if (!media_present(s)) {
1207             ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
1208                                 ASC_INV_FIELD_IN_CMD_PACKET);
1209             return;
1210         }
1211     }
1212 
1213     memset(buf, 0, max_len > IDE_DMA_BUF_SECTORS * 512 + 4 ?
1214            IDE_DMA_BUF_SECTORS * 512 + 4 : max_len);
1215 
1216     switch (format) {
1217         case 0x00 ... 0x7f:
1218         case 0xff:
1219             if (media == 0) {
1220                 ret = ide_dvd_read_structure(s, format, buf, buf);
1221 
1222                 if (ret < 0) {
1223                     ide_atapi_cmd_error(s, ILLEGAL_REQUEST, -ret);
1224                 } else {
1225                     ide_atapi_cmd_reply(s, ret, max_len);
1226                 }
1227 
1228                 break;
1229             }
1230             /* TODO: BD support, fall through for now */
1231 
1232         /* Generic disk structures */
1233         case 0x80: /* TODO: AACS volume identifier */
1234         case 0x81: /* TODO: AACS media serial number */
1235         case 0x82: /* TODO: AACS media identifier */
1236         case 0x83: /* TODO: AACS media key block */
1237         case 0x90: /* TODO: List of recognized format layers */
1238         case 0xc0: /* TODO: Write protection status */
1239         default:
1240             ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
1241                                 ASC_INV_FIELD_IN_CMD_PACKET);
1242             break;
1243     }
1244 }
1245 
1246 static void cmd_set_speed(IDEState *s, uint8_t* buf)
1247 {
1248     ide_atapi_cmd_ok(s);
1249 }
1250 
1251 enum {
1252     /*
1253      * Only commands flagged as ALLOW_UA are allowed to run under a
1254      * unit attention condition. (See MMC-5, section 4.1.6.1)
1255      */
1256     ALLOW_UA = 0x01,
1257 
1258     /*
1259      * Commands flagged with CHECK_READY can only execute if a medium is present.
1260      * Otherwise they report the Not Ready Condition. (See MMC-5, section
1261      * 4.1.8)
1262      */
1263     CHECK_READY = 0x02,
1264 
1265     /*
1266      * Commands flagged with NONDATA do not in any circumstances return
1267      * any data via ide_atapi_cmd_reply. These commands are exempt from
1268      * the normal byte_count_limit constraints.
1269      * See ATA8-ACS3 "7.21.5 Byte Count Limit"
1270      */
1271     NONDATA = 0x04,
1272 
1273     /*
1274      * CONDDATA implies a command that transfers data only conditionally based
1275      * on the presence of suboptions. It should be exempt from the BCL check at
1276      * command validation time, but it needs to be checked at the command
1277      * handler level instead.
1278      */
1279     CONDDATA = 0x08,
1280 };
1281 
1282 static const struct AtapiCmd {
1283     void (*handler)(IDEState *s, uint8_t *buf);
1284     int flags;
1285 } atapi_cmd_table[0x100] = {
1286     [ 0x00 ] = { cmd_test_unit_ready,               CHECK_READY | NONDATA },
1287     [ 0x03 ] = { cmd_request_sense,                 ALLOW_UA },
1288     [ 0x12 ] = { cmd_inquiry,                       ALLOW_UA },
1289     [ 0x1b ] = { cmd_start_stop_unit,               NONDATA }, /* [1] */
1290     [ 0x1e ] = { cmd_prevent_allow_medium_removal,  NONDATA },
1291     [ 0x25 ] = { cmd_read_cdvd_capacity,            CHECK_READY },
1292     [ 0x28 ] = { cmd_read, /* (10) */               CHECK_READY },
1293     [ 0x2b ] = { cmd_seek,                          CHECK_READY | NONDATA },
1294     [ 0x43 ] = { cmd_read_toc_pma_atip,             CHECK_READY },
1295     [ 0x46 ] = { cmd_get_configuration,             ALLOW_UA },
1296     [ 0x4a ] = { cmd_get_event_status_notification, ALLOW_UA },
1297     [ 0x51 ] = { cmd_read_disc_information,         CHECK_READY },
1298     [ 0x5a ] = { cmd_mode_sense, /* (10) */         0 },
1299     [ 0xa8 ] = { cmd_read, /* (12) */               CHECK_READY },
1300     [ 0xad ] = { cmd_read_dvd_structure,            CHECK_READY },
1301     [ 0xbb ] = { cmd_set_speed,                     NONDATA },
1302     [ 0xbd ] = { cmd_mechanism_status,              0 },
1303     [ 0xbe ] = { cmd_read_cd,                       CHECK_READY | CONDDATA },
1304     /* [1] handler detects and reports not ready condition itself */
1305 };
1306 
1307 void ide_atapi_cmd(IDEState *s)
1308 {
1309     uint8_t *buf = s->io_buffer;
1310     const struct AtapiCmd *cmd = &atapi_cmd_table[s->io_buffer[0]];
1311 
1312     trace_ide_atapi_cmd(s, s->io_buffer[0]);
1313 
1314     if (trace_event_get_state_backends(TRACE_IDE_ATAPI_CMD_PACKET)) {
1315         /* Each pretty-printed byte needs two bytes and a space; */
1316         char *ppacket = g_malloc(ATAPI_PACKET_SIZE * 3 + 1);
1317         int i;
1318         for (i = 0; i < ATAPI_PACKET_SIZE; i++) {
1319             sprintf(ppacket + (i * 3), "%02x ", buf[i]);
1320         }
1321         trace_ide_atapi_cmd_packet(s, s->lcyl | (s->hcyl << 8), ppacket);
1322         g_free(ppacket);
1323     }
1324 
1325     /*
1326      * If there's a UNIT_ATTENTION condition pending, only command flagged with
1327      * ALLOW_UA are allowed to complete. with other commands getting a CHECK
1328      * condition response unless a higher priority status, defined by the drive
1329      * here, is pending.
1330      */
1331     if (s->sense_key == UNIT_ATTENTION && !(cmd->flags & ALLOW_UA)) {
1332         ide_atapi_cmd_check_status(s);
1333         return;
1334     }
1335     /*
1336      * When a CD gets changed, we have to report an ejected state and
1337      * then a loaded state to guests so that they detect tray
1338      * open/close and media change events.  Guests that do not use
1339      * GET_EVENT_STATUS_NOTIFICATION to detect such tray open/close
1340      * states rely on this behavior.
1341      */
1342     if (!(cmd->flags & ALLOW_UA) &&
1343         !s->tray_open && blk_is_inserted(s->blk) && s->cdrom_changed) {
1344 
1345         if (s->cdrom_changed == 1) {
1346             ide_atapi_cmd_error(s, NOT_READY, ASC_MEDIUM_NOT_PRESENT);
1347             s->cdrom_changed = 2;
1348         } else {
1349             ide_atapi_cmd_error(s, UNIT_ATTENTION, ASC_MEDIUM_MAY_HAVE_CHANGED);
1350             s->cdrom_changed = 0;
1351         }
1352 
1353         return;
1354     }
1355 
1356     /* Report a Not Ready condition if appropriate for the command */
1357     if ((cmd->flags & CHECK_READY) &&
1358         (!media_present(s) || !blk_is_inserted(s->blk)))
1359     {
1360         ide_atapi_cmd_error(s, NOT_READY, ASC_MEDIUM_NOT_PRESENT);
1361         return;
1362     }
1363 
1364     /* Commands that don't transfer DATA permit the byte_count_limit to be 0.
1365      * If this is a data-transferring PIO command and BCL is 0,
1366      * we abort at the /ATA/ level, not the ATAPI level.
1367      * See ATA8 ACS3 section 7.17.6.49 and 7.21.5 */
1368     if (cmd->handler && !(cmd->flags & (NONDATA | CONDDATA))) {
1369         if (!validate_bcl(s)) {
1370             return;
1371         }
1372     }
1373 
1374     /* Execute the command */
1375     if (cmd->handler) {
1376         cmd->handler(s, buf);
1377         return;
1378     }
1379 
1380     ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_ILLEGAL_OPCODE);
1381 }
1382