xref: /openbmc/qemu/hw/ide/atapi.c (revision 1098cc3f)
1 /*
2  * QEMU ATAPI Emulation
3  *
4  * Copyright (c) 2003 Fabrice Bellard
5  * Copyright (c) 2006 Openedhand Ltd.
6  *
7  * Permission is hereby granted, free of charge, to any person obtaining a copy
8  * of this software and associated documentation files (the "Software"), to deal
9  * in the Software without restriction, including without limitation the rights
10  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
11  * copies of the Software, and to permit persons to whom the Software is
12  * furnished to do so, subject to the following conditions:
13  *
14  * The above copyright notice and this permission notice shall be included in
15  * all copies or substantial portions of the Software.
16  *
17  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
18  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
19  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
20  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
21  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
22  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
23  * THE SOFTWARE.
24  */
25 
26 #include "qemu/osdep.h"
27 #include "hw/ide/internal.h"
28 #include "hw/scsi/scsi.h"
29 #include "sysemu/block-backend.h"
30 #include "scsi/constants.h"
31 #include "trace.h"
32 
33 #define ATAPI_SECTOR_BITS (2 + BDRV_SECTOR_BITS)
34 #define ATAPI_SECTOR_SIZE (1 << ATAPI_SECTOR_BITS)
35 
36 static void ide_atapi_cmd_read_dma_cb(void *opaque, int ret);
37 
38 static void padstr8(uint8_t *buf, int buf_size, const char *src)
39 {
40     int i;
41     for(i = 0; i < buf_size; i++) {
42         if (*src)
43             buf[i] = *src++;
44         else
45             buf[i] = ' ';
46     }
47 }
48 
49 static void lba_to_msf(uint8_t *buf, int lba)
50 {
51     lba += 150;
52     buf[0] = (lba / 75) / 60;
53     buf[1] = (lba / 75) % 60;
54     buf[2] = lba % 75;
55 }
56 
57 static inline int media_present(IDEState *s)
58 {
59     return !s->tray_open && s->nb_sectors > 0;
60 }
61 
62 /* XXX: DVDs that could fit on a CD will be reported as a CD */
63 static inline int media_is_dvd(IDEState *s)
64 {
65     return (media_present(s) && s->nb_sectors > CD_MAX_SECTORS);
66 }
67 
68 static inline int media_is_cd(IDEState *s)
69 {
70     return (media_present(s) && s->nb_sectors <= CD_MAX_SECTORS);
71 }
72 
73 static void cd_data_to_raw(uint8_t *buf, int lba)
74 {
75     /* sync bytes */
76     buf[0] = 0x00;
77     memset(buf + 1, 0xff, 10);
78     buf[11] = 0x00;
79     buf += 12;
80     /* MSF */
81     lba_to_msf(buf, lba);
82     buf[3] = 0x01; /* mode 1 data */
83     buf += 4;
84     /* data */
85     buf += 2048;
86     /* XXX: ECC not computed */
87     memset(buf, 0, 288);
88 }
89 
90 static int
91 cd_read_sector_sync(IDEState *s)
92 {
93     int ret;
94     block_acct_start(blk_get_stats(s->blk), &s->acct,
95                      ATAPI_SECTOR_SIZE, BLOCK_ACCT_READ);
96 
97     trace_cd_read_sector_sync(s->lba);
98 
99     switch (s->cd_sector_size) {
100     case 2048:
101         ret = blk_pread(s->blk, (int64_t)s->lba << ATAPI_SECTOR_BITS,
102                         ATAPI_SECTOR_SIZE, s->io_buffer, 0);
103         break;
104     case 2352:
105         ret = blk_pread(s->blk, (int64_t)s->lba << ATAPI_SECTOR_BITS,
106                         ATAPI_SECTOR_SIZE, s->io_buffer + 16, 0);
107         if (ret >= 0) {
108             cd_data_to_raw(s->io_buffer, s->lba);
109         }
110         break;
111     default:
112         block_acct_invalid(blk_get_stats(s->blk), BLOCK_ACCT_READ);
113         return -EIO;
114     }
115 
116     if (ret < 0) {
117         block_acct_failed(blk_get_stats(s->blk), &s->acct);
118     } else {
119         block_acct_done(blk_get_stats(s->blk), &s->acct);
120         s->lba++;
121         s->io_buffer_index = 0;
122     }
123 
124     return ret;
125 }
126 
127 static void cd_read_sector_cb(void *opaque, int ret)
128 {
129     IDEState *s = opaque;
130 
131     trace_cd_read_sector_cb(s->lba, ret);
132 
133     if (ret < 0) {
134         block_acct_failed(blk_get_stats(s->blk), &s->acct);
135         ide_atapi_io_error(s, ret);
136         return;
137     }
138 
139     block_acct_done(blk_get_stats(s->blk), &s->acct);
140 
141     if (s->cd_sector_size == 2352) {
142         cd_data_to_raw(s->io_buffer, s->lba);
143     }
144 
145     s->lba++;
146     s->io_buffer_index = 0;
147     s->status &= ~BUSY_STAT;
148 
149     ide_atapi_cmd_reply_end(s);
150 }
151 
152 static int cd_read_sector(IDEState *s)
153 {
154     void *buf;
155 
156     if (s->cd_sector_size != 2048 && s->cd_sector_size != 2352) {
157         block_acct_invalid(blk_get_stats(s->blk), BLOCK_ACCT_READ);
158         return -EINVAL;
159     }
160 
161     buf = (s->cd_sector_size == 2352) ? s->io_buffer + 16 : s->io_buffer;
162     qemu_iovec_init_buf(&s->qiov, buf, ATAPI_SECTOR_SIZE);
163 
164     trace_cd_read_sector(s->lba);
165 
166     block_acct_start(blk_get_stats(s->blk), &s->acct,
167                      ATAPI_SECTOR_SIZE, BLOCK_ACCT_READ);
168 
169     ide_buffered_readv(s, (int64_t)s->lba << 2, &s->qiov, 4,
170                        cd_read_sector_cb, s);
171 
172     s->status |= BUSY_STAT;
173     return 0;
174 }
175 
176 void ide_atapi_cmd_ok(IDEState *s)
177 {
178     s->error = 0;
179     s->status = READY_STAT | SEEK_STAT;
180     s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD;
181     ide_transfer_stop(s);
182     ide_bus_set_irq(s->bus);
183 }
184 
185 void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc)
186 {
187     trace_ide_atapi_cmd_error(s, sense_key, asc);
188     s->error = sense_key << 4;
189     s->status = READY_STAT | ERR_STAT;
190     s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD;
191     s->sense_key = sense_key;
192     s->asc = asc;
193     ide_transfer_stop(s);
194     ide_bus_set_irq(s->bus);
195 }
196 
197 void ide_atapi_io_error(IDEState *s, int ret)
198 {
199     /* XXX: handle more errors */
200     if (ret == -ENOMEDIUM) {
201         ide_atapi_cmd_error(s, NOT_READY,
202                             ASC_MEDIUM_NOT_PRESENT);
203     } else {
204         ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
205                             ASC_LOGICAL_BLOCK_OOR);
206     }
207 }
208 
209 static uint16_t atapi_byte_count_limit(IDEState *s)
210 {
211     uint16_t bcl;
212 
213     bcl = s->lcyl | (s->hcyl << 8);
214     if (bcl == 0xffff) {
215         return 0xfffe;
216     }
217     return bcl;
218 }
219 
220 /* The whole ATAPI transfer logic is handled in this function */
221 void ide_atapi_cmd_reply_end(IDEState *s)
222 {
223     int byte_count_limit, size, ret;
224     while (s->packet_transfer_size > 0) {
225         trace_ide_atapi_cmd_reply_end(s, s->packet_transfer_size,
226                                       s->elementary_transfer_size,
227                                       s->io_buffer_index);
228 
229         /* see if a new sector must be read */
230         if (s->lba != -1 && s->io_buffer_index >= s->cd_sector_size) {
231             if (!s->elementary_transfer_size) {
232                 ret = cd_read_sector(s);
233                 if (ret < 0) {
234                     ide_atapi_io_error(s, ret);
235                 }
236                 return;
237             } else {
238                 /* rebuffering within an elementary transfer is
239                  * only possible with a sync request because we
240                  * end up with a race condition otherwise */
241                 ret = cd_read_sector_sync(s);
242                 if (ret < 0) {
243                     ide_atapi_io_error(s, ret);
244                     return;
245                 }
246             }
247         }
248         if (s->elementary_transfer_size > 0) {
249             /* there are some data left to transmit in this elementary
250                transfer */
251             size = s->cd_sector_size - s->io_buffer_index;
252             if (size > s->elementary_transfer_size)
253                 size = s->elementary_transfer_size;
254         } else {
255             /* a new transfer is needed */
256             s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO;
257             ide_bus_set_irq(s->bus);
258             byte_count_limit = atapi_byte_count_limit(s);
259             trace_ide_atapi_cmd_reply_end_bcl(s, byte_count_limit);
260             size = s->packet_transfer_size;
261             if (size > byte_count_limit) {
262                 /* byte count limit must be even if this case */
263                 if (byte_count_limit & 1)
264                     byte_count_limit--;
265                 size = byte_count_limit;
266             }
267             s->lcyl = size;
268             s->hcyl = size >> 8;
269             s->elementary_transfer_size = size;
270             /* we cannot transmit more than one sector at a time */
271             if (s->lba != -1) {
272                 if (size > (s->cd_sector_size - s->io_buffer_index))
273                     size = (s->cd_sector_size - s->io_buffer_index);
274             }
275             trace_ide_atapi_cmd_reply_end_new(s, s->status);
276         }
277         s->packet_transfer_size -= size;
278         s->elementary_transfer_size -= size;
279         s->io_buffer_index += size;
280         assert(size <= s->io_buffer_total_len);
281         assert(s->io_buffer_index <= s->io_buffer_total_len);
282 
283         /* Some adapters process PIO data right away.  In that case, we need
284          * to avoid mutual recursion between ide_transfer_start
285          * and ide_atapi_cmd_reply_end.
286          */
287         if (!ide_transfer_start_norecurse(s,
288                                           s->io_buffer + s->io_buffer_index - size,
289                                           size, ide_atapi_cmd_reply_end)) {
290             return;
291         }
292     }
293 
294     /* end of transfer */
295     trace_ide_atapi_cmd_reply_end_eot(s, s->status);
296     ide_atapi_cmd_ok(s);
297     ide_bus_set_irq(s->bus);
298 }
299 
300 /* send a reply of 'size' bytes in s->io_buffer to an ATAPI command */
301 static void ide_atapi_cmd_reply(IDEState *s, int size, int max_size)
302 {
303     if (size > max_size)
304         size = max_size;
305     s->lba = -1; /* no sector read */
306     s->packet_transfer_size = size;
307     s->io_buffer_size = size;    /* dma: send the reply data as one chunk */
308     s->elementary_transfer_size = 0;
309 
310     if (s->atapi_dma) {
311         block_acct_start(blk_get_stats(s->blk), &s->acct, size,
312                          BLOCK_ACCT_READ);
313         s->status = READY_STAT | SEEK_STAT | DRQ_STAT;
314         ide_start_dma(s, ide_atapi_cmd_read_dma_cb);
315     } else {
316         s->status = READY_STAT | SEEK_STAT;
317         s->io_buffer_index = 0;
318         ide_atapi_cmd_reply_end(s);
319     }
320 }
321 
322 /* start a CD-ROM read command */
323 static void ide_atapi_cmd_read_pio(IDEState *s, int lba, int nb_sectors,
324                                    int sector_size)
325 {
326     assert(0 <= lba && lba < (s->nb_sectors >> 2));
327 
328     s->lba = lba;
329     s->packet_transfer_size = nb_sectors * sector_size;
330     s->elementary_transfer_size = 0;
331     s->io_buffer_index = sector_size;
332     s->cd_sector_size = sector_size;
333 
334     ide_atapi_cmd_reply_end(s);
335 }
336 
337 static void ide_atapi_cmd_check_status(IDEState *s)
338 {
339     trace_ide_atapi_cmd_check_status(s);
340     s->error = MC_ERR | (UNIT_ATTENTION << 4);
341     s->status = ERR_STAT;
342     s->nsector = 0;
343     ide_bus_set_irq(s->bus);
344 }
345 /* ATAPI DMA support */
346 
347 static void ide_atapi_cmd_read_dma_cb(void *opaque, int ret)
348 {
349     IDEState *s = opaque;
350     int data_offset, n;
351 
352     if (ret < 0) {
353         if (ide_handle_rw_error(s, -ret, ide_dma_cmd_to_retry(s->dma_cmd))) {
354             if (s->bus->error_status) {
355                 s->bus->dma->aiocb = NULL;
356                 return;
357             }
358             goto eot;
359         }
360     }
361 
362     if (s->io_buffer_size > 0) {
363         /*
364          * For a cdrom read sector command (s->lba != -1),
365          * adjust the lba for the next s->io_buffer_size chunk
366          * and dma the current chunk.
367          * For a command != read (s->lba == -1), just transfer
368          * the reply data.
369          */
370         if (s->lba != -1) {
371             if (s->cd_sector_size == 2352) {
372                 n = 1;
373                 cd_data_to_raw(s->io_buffer, s->lba);
374             } else {
375                 n = s->io_buffer_size >> 11;
376             }
377             s->lba += n;
378         }
379         s->packet_transfer_size -= s->io_buffer_size;
380         if (s->bus->dma->ops->rw_buf(s->bus->dma, 1) == 0)
381             goto eot;
382     }
383 
384     if (s->packet_transfer_size <= 0) {
385         s->status = READY_STAT | SEEK_STAT;
386         s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD;
387         ide_bus_set_irq(s->bus);
388         goto eot;
389     }
390 
391     s->io_buffer_index = 0;
392     if (s->cd_sector_size == 2352) {
393         n = 1;
394         s->io_buffer_size = s->cd_sector_size;
395         data_offset = 16;
396     } else {
397         n = s->packet_transfer_size >> 11;
398         if (n > (IDE_DMA_BUF_SECTORS / 4))
399             n = (IDE_DMA_BUF_SECTORS / 4);
400         s->io_buffer_size = n * 2048;
401         data_offset = 0;
402     }
403     trace_ide_atapi_cmd_read_dma_cb_aio(s, s->lba, n);
404     qemu_iovec_init_buf(&s->bus->dma->qiov, s->io_buffer + data_offset,
405                         n * ATAPI_SECTOR_SIZE);
406 
407     s->bus->dma->aiocb = ide_buffered_readv(s, (int64_t)s->lba << 2,
408                                             &s->bus->dma->qiov, n * 4,
409                                             ide_atapi_cmd_read_dma_cb, s);
410     return;
411 
412 eot:
413     if (ret < 0) {
414         block_acct_failed(blk_get_stats(s->blk), &s->acct);
415     } else {
416         block_acct_done(blk_get_stats(s->blk), &s->acct);
417     }
418     ide_set_inactive(s, false);
419 }
420 
421 /* start a CD-ROM read command with DMA */
422 /* XXX: test if DMA is available */
423 static void ide_atapi_cmd_read_dma(IDEState *s, int lba, int nb_sectors,
424                                    int sector_size)
425 {
426     assert(0 <= lba && lba < (s->nb_sectors >> 2));
427 
428     s->lba = lba;
429     s->packet_transfer_size = nb_sectors * sector_size;
430     s->io_buffer_size = 0;
431     s->cd_sector_size = sector_size;
432 
433     block_acct_start(blk_get_stats(s->blk), &s->acct, s->packet_transfer_size,
434                      BLOCK_ACCT_READ);
435 
436     /* XXX: check if BUSY_STAT should be set */
437     s->status = READY_STAT | SEEK_STAT | DRQ_STAT | BUSY_STAT;
438     ide_start_dma(s, ide_atapi_cmd_read_dma_cb);
439 }
440 
441 static void ide_atapi_cmd_read(IDEState *s, int lba, int nb_sectors,
442                                int sector_size)
443 {
444     trace_ide_atapi_cmd_read(s, s->atapi_dma ? "dma" : "pio",
445                              lba, nb_sectors);
446     if (s->atapi_dma) {
447         ide_atapi_cmd_read_dma(s, lba, nb_sectors, sector_size);
448     } else {
449         ide_atapi_cmd_read_pio(s, lba, nb_sectors, sector_size);
450     }
451 }
452 
453 void ide_atapi_dma_restart(IDEState *s)
454 {
455     /*
456      * At this point we can just re-evaluate the packet command and start over.
457      * The presence of ->dma_cb callback in the pre_save ensures that the packet
458      * command has been completely sent and we can safely restart command.
459      */
460     s->unit = s->bus->retry_unit;
461     s->bus->dma->ops->restart_dma(s->bus->dma);
462     ide_atapi_cmd(s);
463 }
464 
465 static inline uint8_t ide_atapi_set_profile(uint8_t *buf, uint8_t *index,
466                                             uint16_t profile)
467 {
468     uint8_t *buf_profile = buf + 12; /* start of profiles */
469 
470     buf_profile += ((*index) * 4); /* start of indexed profile */
471     stw_be_p(buf_profile, profile);
472     buf_profile[2] = ((buf_profile[0] == buf[6]) && (buf_profile[1] == buf[7]));
473 
474     /* each profile adds 4 bytes to the response */
475     (*index)++;
476     buf[11] += 4; /* Additional Length */
477 
478     return 4;
479 }
480 
481 static int ide_dvd_read_structure(IDEState *s, int format,
482                                   const uint8_t *packet, uint8_t *buf)
483 {
484     switch (format) {
485         case 0x0: /* Physical format information */
486             {
487                 int layer = packet[6];
488                 uint64_t total_sectors;
489 
490                 if (layer != 0)
491                     return -ASC_INV_FIELD_IN_CMD_PACKET;
492 
493                 total_sectors = s->nb_sectors >> 2;
494                 if (total_sectors == 0) {
495                     return -ASC_MEDIUM_NOT_PRESENT;
496                 }
497 
498                 buf[4] = 1;   /* DVD-ROM, part version 1 */
499                 buf[5] = 0xf; /* 120mm disc, minimum rate unspecified */
500                 buf[6] = 1;   /* one layer, read-only (per MMC-2 spec) */
501                 buf[7] = 0;   /* default densities */
502 
503                 /* FIXME: 0x30000 per spec? */
504                 stl_be_p(buf + 8, 0); /* start sector */
505                 stl_be_p(buf + 12, total_sectors - 1); /* end sector */
506                 stl_be_p(buf + 16, total_sectors - 1); /* l0 end sector */
507 
508                 /* Size of buffer, not including 2 byte size field */
509                 stw_be_p(buf, 2048 + 2);
510 
511                 /* 2k data + 4 byte header */
512                 return (2048 + 4);
513             }
514 
515         case 0x01: /* DVD copyright information */
516             buf[4] = 0; /* no copyright data */
517             buf[5] = 0; /* no region restrictions */
518 
519             /* Size of buffer, not including 2 byte size field */
520             stw_be_p(buf, 4 + 2);
521 
522             /* 4 byte header + 4 byte data */
523             return (4 + 4);
524 
525         case 0x03: /* BCA information - invalid field for no BCA info */
526             return -ASC_INV_FIELD_IN_CMD_PACKET;
527 
528         case 0x04: /* DVD disc manufacturing information */
529             /* Size of buffer, not including 2 byte size field */
530             stw_be_p(buf, 2048 + 2);
531 
532             /* 2k data + 4 byte header */
533             return (2048 + 4);
534 
535         case 0xff:
536             /*
537              * This lists all the command capabilities above.  Add new ones
538              * in order and update the length and buffer return values.
539              */
540 
541             buf[4] = 0x00; /* Physical format */
542             buf[5] = 0x40; /* Not writable, is readable */
543             stw_be_p(buf + 6, 2048 + 4);
544 
545             buf[8] = 0x01; /* Copyright info */
546             buf[9] = 0x40; /* Not writable, is readable */
547             stw_be_p(buf + 10, 4 + 4);
548 
549             buf[12] = 0x03; /* BCA info */
550             buf[13] = 0x40; /* Not writable, is readable */
551             stw_be_p(buf + 14, 188 + 4);
552 
553             buf[16] = 0x04; /* Manufacturing info */
554             buf[17] = 0x40; /* Not writable, is readable */
555             stw_be_p(buf + 18, 2048 + 4);
556 
557             /* Size of buffer, not including 2 byte size field */
558             stw_be_p(buf, 16 + 2);
559 
560             /* data written + 4 byte header */
561             return (16 + 4);
562 
563         default: /* TODO: formats beyond DVD-ROM requires */
564             return -ASC_INV_FIELD_IN_CMD_PACKET;
565     }
566 }
567 
568 static unsigned int event_status_media(IDEState *s,
569                                        uint8_t *buf)
570 {
571     uint8_t event_code, media_status;
572 
573     media_status = 0;
574     if (s->tray_open) {
575         media_status = MS_TRAY_OPEN;
576     } else if (blk_is_inserted(s->blk)) {
577         media_status = MS_MEDIA_PRESENT;
578     }
579 
580     /* Event notification descriptor */
581     event_code = MEC_NO_CHANGE;
582     if (media_status != MS_TRAY_OPEN) {
583         if (s->events.new_media) {
584             event_code = MEC_NEW_MEDIA;
585             s->events.new_media = false;
586         } else if (s->events.eject_request) {
587             event_code = MEC_EJECT_REQUESTED;
588             s->events.eject_request = false;
589         }
590     }
591 
592     buf[4] = event_code;
593     buf[5] = media_status;
594 
595     /* These fields are reserved, just clear them. */
596     buf[6] = 0;
597     buf[7] = 0;
598 
599     return 8; /* We wrote to 4 extra bytes from the header */
600 }
601 
602 /*
603  * Before transferring data or otherwise signalling acceptance of a command
604  * marked CONDDATA, we must check the validity of the byte_count_limit.
605  */
606 static bool validate_bcl(IDEState *s)
607 {
608     /* TODO: Check IDENTIFY data word 125 for defacult BCL (currently 0) */
609     if (s->atapi_dma || atapi_byte_count_limit(s)) {
610         return true;
611     }
612 
613     /* TODO: Move abort back into core.c and introduce proper error flow between
614      *       ATAPI layer and IDE core layer */
615     ide_abort_command(s);
616     return false;
617 }
618 
619 static void cmd_get_event_status_notification(IDEState *s,
620                                               uint8_t *buf)
621 {
622     const uint8_t *packet = buf;
623 
624     struct {
625         uint8_t opcode;
626         uint8_t polled;        /* lsb bit is polled; others are reserved */
627         uint8_t reserved2[2];
628         uint8_t class;
629         uint8_t reserved3[2];
630         uint16_t len;
631         uint8_t control;
632     } QEMU_PACKED *gesn_cdb;
633 
634     struct {
635         uint16_t len;
636         uint8_t notification_class;
637         uint8_t supported_events;
638     } QEMU_PACKED *gesn_event_header;
639     unsigned int max_len, used_len;
640 
641     gesn_cdb = (void *)packet;
642     gesn_event_header = (void *)buf;
643 
644     max_len = be16_to_cpu(gesn_cdb->len);
645 
646     /* It is fine by the MMC spec to not support async mode operations */
647     if (!(gesn_cdb->polled & 0x01)) { /* asynchronous mode */
648         /* Only polling is supported, asynchronous mode is not. */
649         ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
650                             ASC_INV_FIELD_IN_CMD_PACKET);
651         return;
652     }
653 
654     /* polling mode operation */
655 
656     /*
657      * These are the supported events.
658      *
659      * We currently only support requests of the 'media' type.
660      * Notification class requests and supported event classes are bitmasks,
661      * but they are build from the same values as the "notification class"
662      * field.
663      */
664     gesn_event_header->supported_events = 1 << GESN_MEDIA;
665 
666     /*
667      * We use |= below to set the class field; other bits in this byte
668      * are reserved now but this is useful to do if we have to use the
669      * reserved fields later.
670      */
671     gesn_event_header->notification_class = 0;
672 
673     /*
674      * Responses to requests are to be based on request priority.  The
675      * notification_class_request_type enum above specifies the
676      * priority: upper elements are higher prio than lower ones.
677      */
678     if (gesn_cdb->class & (1 << GESN_MEDIA)) {
679         gesn_event_header->notification_class |= GESN_MEDIA;
680         used_len = event_status_media(s, buf);
681     } else {
682         gesn_event_header->notification_class = 0x80; /* No event available */
683         used_len = sizeof(*gesn_event_header);
684     }
685     gesn_event_header->len = cpu_to_be16(used_len
686                                          - sizeof(*gesn_event_header));
687     ide_atapi_cmd_reply(s, used_len, max_len);
688 }
689 
690 static void cmd_request_sense(IDEState *s, uint8_t *buf)
691 {
692     int max_len = buf[4];
693 
694     memset(buf, 0, 18);
695     buf[0] = 0x70 | (1 << 7);
696     buf[2] = s->sense_key;
697     buf[7] = 10;
698     buf[12] = s->asc;
699 
700     if (s->sense_key == UNIT_ATTENTION) {
701         s->sense_key = NO_SENSE;
702     }
703 
704     ide_atapi_cmd_reply(s, 18, max_len);
705 }
706 
707 static void cmd_inquiry(IDEState *s, uint8_t *buf)
708 {
709     uint8_t page_code = buf[2];
710     int max_len = buf[4];
711 
712     unsigned idx = 0;
713     unsigned size_idx;
714     unsigned preamble_len;
715 
716     /* If the EVPD (Enable Vital Product Data) bit is set in byte 1,
717      * we are being asked for a specific page of info indicated by byte 2. */
718     if (buf[1] & 0x01) {
719         preamble_len = 4;
720         size_idx = 3;
721 
722         buf[idx++] = 0x05;      /* CD-ROM */
723         buf[idx++] = page_code; /* Page Code */
724         buf[idx++] = 0x00;      /* reserved */
725         idx++;                  /* length (set later) */
726 
727         switch (page_code) {
728         case 0x00:
729             /* Supported Pages: List of supported VPD responses. */
730             buf[idx++] = 0x00; /* 0x00: Supported Pages, and: */
731             buf[idx++] = 0x83; /* 0x83: Device Identification. */
732             break;
733 
734         case 0x83:
735             /* Device Identification. Each entry is optional, but the entries
736              * included here are modeled after libata's VPD responses.
737              * If the response is given, at least one entry must be present. */
738 
739             /* Entry 1: Serial */
740             if (idx + 24 > max_len) {
741                 /* Not enough room for even the first entry: */
742                 /* 4 byte header + 20 byte string */
743                 ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
744                                     ASC_DATA_PHASE_ERROR);
745                 return;
746             }
747             buf[idx++] = 0x02; /* Ascii */
748             buf[idx++] = 0x00; /* Vendor Specific */
749             buf[idx++] = 0x00;
750             buf[idx++] = 20;   /* Remaining length */
751             padstr8(buf + idx, 20, s->drive_serial_str);
752             idx += 20;
753 
754             /* Entry 2: Drive Model and Serial */
755             if (idx + 72 > max_len) {
756                 /* 4 (header) + 8 (vendor) + 60 (model & serial) */
757                 goto out;
758             }
759             buf[idx++] = 0x02; /* Ascii */
760             buf[idx++] = 0x01; /* T10 Vendor */
761             buf[idx++] = 0x00;
762             buf[idx++] = 68;
763             padstr8(buf + idx, 8, "ATA"); /* Generic T10 vendor */
764             idx += 8;
765             padstr8(buf + idx, 40, s->drive_model_str);
766             idx += 40;
767             padstr8(buf + idx, 20, s->drive_serial_str);
768             idx += 20;
769 
770             /* Entry 3: WWN */
771             if (s->wwn && (idx + 12 <= max_len)) {
772                 /* 4 byte header + 8 byte wwn */
773                 buf[idx++] = 0x01; /* Binary */
774                 buf[idx++] = 0x03; /* NAA */
775                 buf[idx++] = 0x00;
776                 buf[idx++] = 0x08;
777                 stq_be_p(&buf[idx], s->wwn);
778                 idx += 8;
779             }
780             break;
781 
782         default:
783             /* SPC-3, revision 23 sec. 6.4 */
784             ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
785                                 ASC_INV_FIELD_IN_CMD_PACKET);
786             return;
787         }
788     } else {
789         preamble_len = 5;
790         size_idx = 4;
791 
792         buf[0] = 0x05; /* CD-ROM */
793         buf[1] = 0x80; /* removable */
794         buf[2] = 0x00; /* ISO */
795         buf[3] = 0x21; /* ATAPI-2 (XXX: put ATAPI-4 ?) */
796         /* buf[size_idx] set below. */
797         buf[5] = 0;    /* reserved */
798         buf[6] = 0;    /* reserved */
799         buf[7] = 0;    /* reserved */
800         padstr8(buf + 8, 8, "QEMU");
801         padstr8(buf + 16, 16, "QEMU DVD-ROM");
802         padstr8(buf + 32, 4, s->version);
803         idx = 36;
804     }
805 
806  out:
807     buf[size_idx] = idx - preamble_len;
808     ide_atapi_cmd_reply(s, idx, max_len);
809 }
810 
811 static void cmd_get_configuration(IDEState *s, uint8_t *buf)
812 {
813     uint32_t len;
814     uint8_t index = 0;
815     int max_len;
816 
817     /* only feature 0 is supported */
818     if (buf[2] != 0 || buf[3] != 0) {
819         ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
820                             ASC_INV_FIELD_IN_CMD_PACKET);
821         return;
822     }
823 
824     /* XXX: could result in alignment problems in some architectures */
825     max_len = lduw_be_p(buf + 7);
826 
827     /*
828      * XXX: avoid overflow for io_buffer if max_len is bigger than
829      *      the size of that buffer (dimensioned to max number of
830      *      sectors to transfer at once)
831      *
832      *      Only a problem if the feature/profiles grow.
833      */
834     if (max_len > BDRV_SECTOR_SIZE) {
835         /* XXX: assume 1 sector */
836         max_len = BDRV_SECTOR_SIZE;
837     }
838 
839     memset(buf, 0, max_len);
840     /*
841      * the number of sectors from the media tells us which profile
842      * to use as current.  0 means there is no media
843      */
844     if (media_is_dvd(s)) {
845         stw_be_p(buf + 6, MMC_PROFILE_DVD_ROM);
846     } else if (media_is_cd(s)) {
847         stw_be_p(buf + 6, MMC_PROFILE_CD_ROM);
848     }
849 
850     buf[10] = 0x02 | 0x01; /* persistent and current */
851     len = 12; /* headers: 8 + 4 */
852     len += ide_atapi_set_profile(buf, &index, MMC_PROFILE_DVD_ROM);
853     len += ide_atapi_set_profile(buf, &index, MMC_PROFILE_CD_ROM);
854     stl_be_p(buf, len - 4); /* data length */
855 
856     ide_atapi_cmd_reply(s, len, max_len);
857 }
858 
859 static void cmd_mode_sense(IDEState *s, uint8_t *buf)
860 {
861     int action, code;
862     int max_len;
863 
864     max_len = lduw_be_p(buf + 7);
865     action = buf[2] >> 6;
866     code = buf[2] & 0x3f;
867 
868     switch(action) {
869     case 0: /* current values */
870         switch(code) {
871         case MODE_PAGE_R_W_ERROR: /* error recovery */
872             stw_be_p(&buf[0], 16 - 2);
873             buf[2] = 0x70;
874             buf[3] = 0;
875             buf[4] = 0;
876             buf[5] = 0;
877             buf[6] = 0;
878             buf[7] = 0;
879 
880             buf[8] = MODE_PAGE_R_W_ERROR;
881             buf[9] = 16 - 10;
882             buf[10] = 0x00;
883             buf[11] = 0x05;
884             buf[12] = 0x00;
885             buf[13] = 0x00;
886             buf[14] = 0x00;
887             buf[15] = 0x00;
888             ide_atapi_cmd_reply(s, 16, max_len);
889             break;
890         case MODE_PAGE_AUDIO_CTL:
891             stw_be_p(&buf[0], 24 - 2);
892             buf[2] = 0x70;
893             buf[3] = 0;
894             buf[4] = 0;
895             buf[5] = 0;
896             buf[6] = 0;
897             buf[7] = 0;
898 
899             buf[8] = MODE_PAGE_AUDIO_CTL;
900             buf[9] = 24 - 10;
901             /* Fill with CDROM audio volume */
902             buf[17] = 0;
903             buf[19] = 0;
904             buf[21] = 0;
905             buf[23] = 0;
906 
907             ide_atapi_cmd_reply(s, 24, max_len);
908             break;
909         case MODE_PAGE_CAPABILITIES:
910             stw_be_p(&buf[0], 30 - 2);
911             buf[2] = 0x70;
912             buf[3] = 0;
913             buf[4] = 0;
914             buf[5] = 0;
915             buf[6] = 0;
916             buf[7] = 0;
917 
918             buf[8] = MODE_PAGE_CAPABILITIES;
919             buf[9] = 30 - 10;
920             buf[10] = 0x3b; /* read CDR/CDRW/DVDROM/DVDR/DVDRAM */
921             buf[11] = 0x00;
922 
923             /* Claim PLAY_AUDIO capability (0x01) since some Linux
924                code checks for this to automount media. */
925             buf[12] = 0x71;
926             buf[13] = 3 << 5;
927             buf[14] = (1 << 0) | (1 << 3) | (1 << 5);
928             if (s->tray_locked) {
929                 buf[14] |= 1 << 1;
930             }
931             buf[15] = 0x00; /* No volume & mute control, no changer */
932             stw_be_p(&buf[16], 704); /* 4x read speed */
933             buf[18] = 0; /* Two volume levels */
934             buf[19] = 2;
935             stw_be_p(&buf[20], 512); /* 512k buffer */
936             stw_be_p(&buf[22], 704); /* 4x read speed current */
937             buf[24] = 0;
938             buf[25] = 0;
939             buf[26] = 0;
940             buf[27] = 0;
941             buf[28] = 0;
942             buf[29] = 0;
943             ide_atapi_cmd_reply(s, 30, max_len);
944             break;
945         default:
946             goto error_cmd;
947         }
948         break;
949     case 1: /* changeable values */
950         goto error_cmd;
951     case 2: /* default values */
952         goto error_cmd;
953     default:
954     case 3: /* saved values */
955         ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
956                             ASC_SAVING_PARAMETERS_NOT_SUPPORTED);
957         break;
958     }
959     return;
960 
961 error_cmd:
962     ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_INV_FIELD_IN_CMD_PACKET);
963 }
964 
965 static void cmd_test_unit_ready(IDEState *s, uint8_t *buf)
966 {
967     /* Not Ready Conditions are already handled in ide_atapi_cmd(), so if we
968      * come here, we know that it's ready. */
969     ide_atapi_cmd_ok(s);
970 }
971 
972 static void cmd_prevent_allow_medium_removal(IDEState *s, uint8_t* buf)
973 {
974     s->tray_locked = buf[4] & 1;
975     blk_lock_medium(s->blk, buf[4] & 1);
976     ide_atapi_cmd_ok(s);
977 }
978 
979 static void cmd_read(IDEState *s, uint8_t* buf)
980 {
981     unsigned int nb_sectors, lba;
982 
983     /* Total logical sectors of ATAPI_SECTOR_SIZE(=2048) bytes */
984     uint64_t total_sectors = s->nb_sectors >> 2;
985 
986     if (buf[0] == GPCMD_READ_10) {
987         nb_sectors = lduw_be_p(buf + 7);
988     } else {
989         nb_sectors = ldl_be_p(buf + 6);
990     }
991     if (nb_sectors == 0) {
992         ide_atapi_cmd_ok(s);
993         return;
994     }
995 
996     lba = ldl_be_p(buf + 2);
997     if (lba >= total_sectors || lba + nb_sectors - 1 >= total_sectors) {
998         ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_LOGICAL_BLOCK_OOR);
999         return;
1000     }
1001 
1002     ide_atapi_cmd_read(s, lba, nb_sectors, 2048);
1003 }
1004 
1005 static void cmd_read_cd(IDEState *s, uint8_t* buf)
1006 {
1007     unsigned int nb_sectors, lba, transfer_request;
1008 
1009     /* Total logical sectors of ATAPI_SECTOR_SIZE(=2048) bytes */
1010     uint64_t total_sectors = s->nb_sectors >> 2;
1011 
1012     nb_sectors = (buf[6] << 16) | (buf[7] << 8) | buf[8];
1013     if (nb_sectors == 0) {
1014         ide_atapi_cmd_ok(s);
1015         return;
1016     }
1017 
1018     lba = ldl_be_p(buf + 2);
1019     if (lba >= total_sectors || lba + nb_sectors - 1 >= total_sectors) {
1020         ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_LOGICAL_BLOCK_OOR);
1021         return;
1022     }
1023 
1024     transfer_request = buf[9] & 0xf8;
1025     if (transfer_request == 0x00) {
1026         /* nothing */
1027         ide_atapi_cmd_ok(s);
1028         return;
1029     }
1030 
1031     /* Check validity of BCL before transferring data */
1032     if (!validate_bcl(s)) {
1033         return;
1034     }
1035 
1036     switch (transfer_request) {
1037     case 0x10:
1038         /* normal read */
1039         ide_atapi_cmd_read(s, lba, nb_sectors, 2048);
1040         break;
1041     case 0xf8:
1042         /* read all data */
1043         ide_atapi_cmd_read(s, lba, nb_sectors, 2352);
1044         break;
1045     default:
1046         ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
1047                             ASC_INV_FIELD_IN_CMD_PACKET);
1048         break;
1049     }
1050 }
1051 
1052 static void cmd_seek(IDEState *s, uint8_t* buf)
1053 {
1054     unsigned int lba;
1055     uint64_t total_sectors = s->nb_sectors >> 2;
1056 
1057     lba = ldl_be_p(buf + 2);
1058     if (lba >= total_sectors) {
1059         ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_LOGICAL_BLOCK_OOR);
1060         return;
1061     }
1062 
1063     ide_atapi_cmd_ok(s);
1064 }
1065 
1066 static void cmd_start_stop_unit(IDEState *s, uint8_t* buf)
1067 {
1068     int sense;
1069     bool start = buf[4] & 1;
1070     bool loej = buf[4] & 2;     /* load on start, eject on !start */
1071     int pwrcnd = buf[4] & 0xf0;
1072 
1073     if (pwrcnd) {
1074         /* eject/load only happens for power condition == 0 */
1075         ide_atapi_cmd_ok(s);
1076         return;
1077     }
1078 
1079     if (loej) {
1080         if (!start && !s->tray_open && s->tray_locked) {
1081             sense = blk_is_inserted(s->blk)
1082                 ? NOT_READY : ILLEGAL_REQUEST;
1083             ide_atapi_cmd_error(s, sense, ASC_MEDIA_REMOVAL_PREVENTED);
1084             return;
1085         }
1086 
1087         if (s->tray_open != !start) {
1088             blk_eject(s->blk, !start);
1089             s->tray_open = !start;
1090         }
1091     }
1092 
1093     ide_atapi_cmd_ok(s);
1094 }
1095 
1096 static void cmd_mechanism_status(IDEState *s, uint8_t* buf)
1097 {
1098     int max_len = lduw_be_p(buf + 8);
1099 
1100     stw_be_p(buf, 0);
1101     /* no current LBA */
1102     buf[2] = 0;
1103     buf[3] = 0;
1104     buf[4] = 0;
1105     buf[5] = 1;
1106     stw_be_p(buf + 6, 0);
1107     ide_atapi_cmd_reply(s, 8, max_len);
1108 }
1109 
1110 static void cmd_read_toc_pma_atip(IDEState *s, uint8_t* buf)
1111 {
1112     int format, msf, start_track, len;
1113     int max_len;
1114     uint64_t total_sectors = s->nb_sectors >> 2;
1115 
1116     max_len = lduw_be_p(buf + 7);
1117     format = buf[9] >> 6;
1118     msf = (buf[1] >> 1) & 1;
1119     start_track = buf[6];
1120 
1121     switch(format) {
1122     case 0:
1123         len = cdrom_read_toc(total_sectors, buf, msf, start_track);
1124         if (len < 0)
1125             goto error_cmd;
1126         ide_atapi_cmd_reply(s, len, max_len);
1127         break;
1128     case 1:
1129         /* multi session : only a single session defined */
1130         memset(buf, 0, 12);
1131         buf[1] = 0x0a;
1132         buf[2] = 0x01;
1133         buf[3] = 0x01;
1134         ide_atapi_cmd_reply(s, 12, max_len);
1135         break;
1136     case 2:
1137         len = cdrom_read_toc_raw(total_sectors, buf, msf, start_track);
1138         if (len < 0)
1139             goto error_cmd;
1140         ide_atapi_cmd_reply(s, len, max_len);
1141         break;
1142     default:
1143     error_cmd:
1144         ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
1145                             ASC_INV_FIELD_IN_CMD_PACKET);
1146     }
1147 }
1148 
1149 static void cmd_read_cdvd_capacity(IDEState *s, uint8_t* buf)
1150 {
1151     uint64_t total_sectors = s->nb_sectors >> 2;
1152 
1153     /* NOTE: it is really the number of sectors minus 1 */
1154     stl_be_p(buf, total_sectors - 1);
1155     stl_be_p(buf + 4, 2048);
1156     ide_atapi_cmd_reply(s, 8, 8);
1157 }
1158 
1159 static void cmd_read_disc_information(IDEState *s, uint8_t* buf)
1160 {
1161     uint8_t type = buf[1] & 7;
1162     uint32_t max_len = lduw_be_p(buf + 7);
1163 
1164     /* Types 1/2 are only defined for Blu-Ray.  */
1165     if (type != 0) {
1166         ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
1167                             ASC_INV_FIELD_IN_CMD_PACKET);
1168         return;
1169     }
1170 
1171     memset(buf, 0, 34);
1172     buf[1] = 32;
1173     buf[2] = 0xe; /* last session complete, disc finalized */
1174     buf[3] = 1;   /* first track on disc */
1175     buf[4] = 1;   /* # of sessions */
1176     buf[5] = 1;   /* first track of last session */
1177     buf[6] = 1;   /* last track of last session */
1178     buf[7] = 0x20; /* unrestricted use */
1179     buf[8] = 0x00; /* CD-ROM or DVD-ROM */
1180     /* 9-10-11: most significant byte corresponding bytes 4-5-6 */
1181     /* 12-23: not meaningful for CD-ROM or DVD-ROM */
1182     /* 24-31: disc bar code */
1183     /* 32: disc application code */
1184     /* 33: number of OPC tables */
1185 
1186     ide_atapi_cmd_reply(s, 34, max_len);
1187 }
1188 
1189 static void cmd_read_dvd_structure(IDEState *s, uint8_t* buf)
1190 {
1191     int max_len;
1192     int media = buf[1];
1193     int format = buf[7];
1194     int ret;
1195 
1196     max_len = lduw_be_p(buf + 8);
1197 
1198     if (format < 0xff) {
1199         if (media_is_cd(s)) {
1200             ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
1201                                 ASC_INCOMPATIBLE_FORMAT);
1202             return;
1203         } else if (!media_present(s)) {
1204             ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
1205                                 ASC_INV_FIELD_IN_CMD_PACKET);
1206             return;
1207         }
1208     }
1209 
1210     memset(buf, 0, max_len > IDE_DMA_BUF_SECTORS * BDRV_SECTOR_SIZE + 4 ?
1211            IDE_DMA_BUF_SECTORS * BDRV_SECTOR_SIZE + 4 : max_len);
1212 
1213     switch (format) {
1214         case 0x00 ... 0x7f:
1215         case 0xff:
1216             if (media == 0) {
1217                 ret = ide_dvd_read_structure(s, format, buf, buf);
1218 
1219                 if (ret < 0) {
1220                     ide_atapi_cmd_error(s, ILLEGAL_REQUEST, -ret);
1221                 } else {
1222                     ide_atapi_cmd_reply(s, ret, max_len);
1223                 }
1224 
1225                 break;
1226             }
1227             /* TODO: BD support, fall through for now */
1228 
1229         /* Generic disk structures */
1230         case 0x80: /* TODO: AACS volume identifier */
1231         case 0x81: /* TODO: AACS media serial number */
1232         case 0x82: /* TODO: AACS media identifier */
1233         case 0x83: /* TODO: AACS media key block */
1234         case 0x90: /* TODO: List of recognized format layers */
1235         case 0xc0: /* TODO: Write protection status */
1236         default:
1237             ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
1238                                 ASC_INV_FIELD_IN_CMD_PACKET);
1239             break;
1240     }
1241 }
1242 
1243 static void cmd_set_speed(IDEState *s, uint8_t* buf)
1244 {
1245     ide_atapi_cmd_ok(s);
1246 }
1247 
1248 enum {
1249     /*
1250      * Only commands flagged as ALLOW_UA are allowed to run under a
1251      * unit attention condition. (See MMC-5, section 4.1.6.1)
1252      */
1253     ALLOW_UA = 0x01,
1254 
1255     /*
1256      * Commands flagged with CHECK_READY can only execute if a medium is present.
1257      * Otherwise they report the Not Ready Condition. (See MMC-5, section
1258      * 4.1.8)
1259      */
1260     CHECK_READY = 0x02,
1261 
1262     /*
1263      * Commands flagged with NONDATA do not in any circumstances return
1264      * any data via ide_atapi_cmd_reply. These commands are exempt from
1265      * the normal byte_count_limit constraints.
1266      * See ATA8-ACS3 "7.21.5 Byte Count Limit"
1267      */
1268     NONDATA = 0x04,
1269 
1270     /*
1271      * CONDDATA implies a command that transfers data only conditionally based
1272      * on the presence of suboptions. It should be exempt from the BCL check at
1273      * command validation time, but it needs to be checked at the command
1274      * handler level instead.
1275      */
1276     CONDDATA = 0x08,
1277 };
1278 
1279 static const struct AtapiCmd {
1280     void (*handler)(IDEState *s, uint8_t *buf);
1281     int flags;
1282 } atapi_cmd_table[0x100] = {
1283     [ 0x00 ] = { cmd_test_unit_ready,               CHECK_READY | NONDATA },
1284     [ 0x03 ] = { cmd_request_sense,                 ALLOW_UA },
1285     [ 0x12 ] = { cmd_inquiry,                       ALLOW_UA },
1286     [ 0x1b ] = { cmd_start_stop_unit,               NONDATA }, /* [1] */
1287     [ 0x1e ] = { cmd_prevent_allow_medium_removal,  NONDATA },
1288     [ 0x25 ] = { cmd_read_cdvd_capacity,            CHECK_READY },
1289     [ 0x28 ] = { cmd_read, /* (10) */               CHECK_READY },
1290     [ 0x2b ] = { cmd_seek,                          CHECK_READY | NONDATA },
1291     [ 0x43 ] = { cmd_read_toc_pma_atip,             CHECK_READY },
1292     [ 0x46 ] = { cmd_get_configuration,             ALLOW_UA },
1293     [ 0x4a ] = { cmd_get_event_status_notification, ALLOW_UA },
1294     [ 0x51 ] = { cmd_read_disc_information,         CHECK_READY },
1295     [ 0x5a ] = { cmd_mode_sense, /* (10) */         0 },
1296     [ 0xa8 ] = { cmd_read, /* (12) */               CHECK_READY },
1297     [ 0xad ] = { cmd_read_dvd_structure,            CHECK_READY },
1298     [ 0xbb ] = { cmd_set_speed,                     NONDATA },
1299     [ 0xbd ] = { cmd_mechanism_status,              0 },
1300     [ 0xbe ] = { cmd_read_cd,                       CHECK_READY | CONDDATA },
1301     /* [1] handler detects and reports not ready condition itself */
1302 };
1303 
1304 void ide_atapi_cmd(IDEState *s)
1305 {
1306     uint8_t *buf = s->io_buffer;
1307     const struct AtapiCmd *cmd = &atapi_cmd_table[s->io_buffer[0]];
1308 
1309     trace_ide_atapi_cmd(s, s->io_buffer[0]);
1310 
1311     if (trace_event_get_state_backends(TRACE_IDE_ATAPI_CMD_PACKET)) {
1312         /* Each pretty-printed byte needs two bytes and a space; */
1313         char *ppacket = g_malloc(ATAPI_PACKET_SIZE * 3 + 1);
1314         int i;
1315         for (i = 0; i < ATAPI_PACKET_SIZE; i++) {
1316             sprintf(ppacket + (i * 3), "%02x ", buf[i]);
1317         }
1318         trace_ide_atapi_cmd_packet(s, s->lcyl | (s->hcyl << 8), ppacket);
1319         g_free(ppacket);
1320     }
1321 
1322     /*
1323      * If there's a UNIT_ATTENTION condition pending, only command flagged with
1324      * ALLOW_UA are allowed to complete. with other commands getting a CHECK
1325      * condition response unless a higher priority status, defined by the drive
1326      * here, is pending.
1327      */
1328     if (s->sense_key == UNIT_ATTENTION && !(cmd->flags & ALLOW_UA)) {
1329         ide_atapi_cmd_check_status(s);
1330         return;
1331     }
1332     /*
1333      * When a CD gets changed, we have to report an ejected state and
1334      * then a loaded state to guests so that they detect tray
1335      * open/close and media change events.  Guests that do not use
1336      * GET_EVENT_STATUS_NOTIFICATION to detect such tray open/close
1337      * states rely on this behavior.
1338      */
1339     if (!(cmd->flags & ALLOW_UA) &&
1340         !s->tray_open && blk_is_inserted(s->blk) && s->cdrom_changed) {
1341 
1342         if (s->cdrom_changed == 1) {
1343             ide_atapi_cmd_error(s, NOT_READY, ASC_MEDIUM_NOT_PRESENT);
1344             s->cdrom_changed = 2;
1345         } else {
1346             ide_atapi_cmd_error(s, UNIT_ATTENTION, ASC_MEDIUM_MAY_HAVE_CHANGED);
1347             s->cdrom_changed = 0;
1348         }
1349 
1350         return;
1351     }
1352 
1353     /* Report a Not Ready condition if appropriate for the command */
1354     if ((cmd->flags & CHECK_READY) &&
1355         (!media_present(s) || !blk_is_inserted(s->blk)))
1356     {
1357         ide_atapi_cmd_error(s, NOT_READY, ASC_MEDIUM_NOT_PRESENT);
1358         return;
1359     }
1360 
1361     /* Commands that don't transfer DATA permit the byte_count_limit to be 0.
1362      * If this is a data-transferring PIO command and BCL is 0,
1363      * we abort at the /ATA/ level, not the ATAPI level.
1364      * See ATA8 ACS3 section 7.17.6.49 and 7.21.5 */
1365     if (cmd->handler && !(cmd->flags & (NONDATA | CONDDATA))) {
1366         if (!validate_bcl(s)) {
1367             return;
1368         }
1369     }
1370 
1371     /* Execute the command */
1372     if (cmd->handler) {
1373         cmd->handler(s, buf);
1374         return;
1375     }
1376 
1377     ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_ILLEGAL_OPCODE);
1378 }
1379