1 /* 2 * QEMU AHCI Emulation 3 * 4 * Copyright (c) 2010 qiaochong@loongson.cn 5 * Copyright (c) 2010 Roland Elek <elek.roland@gmail.com> 6 * Copyright (c) 2010 Sebastian Herbszt <herbszt@gmx.de> 7 * Copyright (c) 2010 Alexander Graf <agraf@suse.de> 8 * 9 * This library is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU Lesser General Public 11 * License as published by the Free Software Foundation; either 12 * version 2.1 of the License, or (at your option) any later version. 13 * 14 * This library is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 17 * Lesser General Public License for more details. 18 * 19 * You should have received a copy of the GNU Lesser General Public 20 * License along with this library; if not, see <http://www.gnu.org/licenses/>. 21 * 22 */ 23 24 #include "qemu/osdep.h" 25 #include "hw/irq.h" 26 #include "hw/pci/msi.h" 27 #include "hw/pci/pci.h" 28 #include "hw/qdev-properties.h" 29 #include "migration/vmstate.h" 30 31 #include "qemu/error-report.h" 32 #include "qemu/log.h" 33 #include "qemu/main-loop.h" 34 #include "qemu/module.h" 35 #include "sysemu/block-backend.h" 36 #include "sysemu/dma.h" 37 #include "hw/ide/internal.h" 38 #include "hw/ide/pci.h" 39 #include "ahci_internal.h" 40 41 #include "trace.h" 42 43 static void check_cmd(AHCIState *s, int port); 44 static void handle_cmd(AHCIState *s, int port, uint8_t slot); 45 static void ahci_reset_port(AHCIState *s, int port); 46 static bool ahci_write_fis_d2h(AHCIDevice *ad, bool d2h_fis_i); 47 static void ahci_clear_cmd_issue(AHCIDevice *ad, uint8_t slot); 48 static void ahci_init_d2h(AHCIDevice *ad); 49 static int ahci_dma_prepare_buf(const IDEDMA *dma, int32_t limit); 50 static bool ahci_map_clb_address(AHCIDevice *ad); 51 static bool ahci_map_fis_address(AHCIDevice *ad); 52 static void ahci_unmap_clb_address(AHCIDevice *ad); 53 static void ahci_unmap_fis_address(AHCIDevice *ad); 54 55 static const char *AHCIHostReg_lookup[AHCI_HOST_REG__COUNT] = { 56 [AHCI_HOST_REG_CAP] = "CAP", 57 [AHCI_HOST_REG_CTL] = "GHC", 58 [AHCI_HOST_REG_IRQ_STAT] = "IS", 59 [AHCI_HOST_REG_PORTS_IMPL] = "PI", 60 [AHCI_HOST_REG_VERSION] = "VS", 61 [AHCI_HOST_REG_CCC_CTL] = "CCC_CTL", 62 [AHCI_HOST_REG_CCC_PORTS] = "CCC_PORTS", 63 [AHCI_HOST_REG_EM_LOC] = "EM_LOC", 64 [AHCI_HOST_REG_EM_CTL] = "EM_CTL", 65 [AHCI_HOST_REG_CAP2] = "CAP2", 66 [AHCI_HOST_REG_BOHC] = "BOHC", 67 }; 68 69 static const char *AHCIPortReg_lookup[AHCI_PORT_REG__COUNT] = { 70 [AHCI_PORT_REG_LST_ADDR] = "PxCLB", 71 [AHCI_PORT_REG_LST_ADDR_HI] = "PxCLBU", 72 [AHCI_PORT_REG_FIS_ADDR] = "PxFB", 73 [AHCI_PORT_REG_FIS_ADDR_HI] = "PxFBU", 74 [AHCI_PORT_REG_IRQ_STAT] = "PxIS", 75 [AHCI_PORT_REG_IRQ_MASK] = "PXIE", 76 [AHCI_PORT_REG_CMD] = "PxCMD", 77 [7] = "Reserved", 78 [AHCI_PORT_REG_TFDATA] = "PxTFD", 79 [AHCI_PORT_REG_SIG] = "PxSIG", 80 [AHCI_PORT_REG_SCR_STAT] = "PxSSTS", 81 [AHCI_PORT_REG_SCR_CTL] = "PxSCTL", 82 [AHCI_PORT_REG_SCR_ERR] = "PxSERR", 83 [AHCI_PORT_REG_SCR_ACT] = "PxSACT", 84 [AHCI_PORT_REG_CMD_ISSUE] = "PxCI", 85 [AHCI_PORT_REG_SCR_NOTIF] = "PxSNTF", 86 [AHCI_PORT_REG_FIS_CTL] = "PxFBS", 87 [AHCI_PORT_REG_DEV_SLEEP] = "PxDEVSLP", 88 [18 ... 27] = "Reserved", 89 [AHCI_PORT_REG_VENDOR_1 ... 90 AHCI_PORT_REG_VENDOR_4] = "PxVS", 91 }; 92 93 static const char *AHCIPortIRQ_lookup[AHCI_PORT_IRQ__COUNT] = { 94 [AHCI_PORT_IRQ_BIT_DHRS] = "DHRS", 95 [AHCI_PORT_IRQ_BIT_PSS] = "PSS", 96 [AHCI_PORT_IRQ_BIT_DSS] = "DSS", 97 [AHCI_PORT_IRQ_BIT_SDBS] = "SDBS", 98 [AHCI_PORT_IRQ_BIT_UFS] = "UFS", 99 [AHCI_PORT_IRQ_BIT_DPS] = "DPS", 100 [AHCI_PORT_IRQ_BIT_PCS] = "PCS", 101 [AHCI_PORT_IRQ_BIT_DMPS] = "DMPS", 102 [8 ... 21] = "RESERVED", 103 [AHCI_PORT_IRQ_BIT_PRCS] = "PRCS", 104 [AHCI_PORT_IRQ_BIT_IPMS] = "IPMS", 105 [AHCI_PORT_IRQ_BIT_OFS] = "OFS", 106 [25] = "RESERVED", 107 [AHCI_PORT_IRQ_BIT_INFS] = "INFS", 108 [AHCI_PORT_IRQ_BIT_IFS] = "IFS", 109 [AHCI_PORT_IRQ_BIT_HBDS] = "HBDS", 110 [AHCI_PORT_IRQ_BIT_HBFS] = "HBFS", 111 [AHCI_PORT_IRQ_BIT_TFES] = "TFES", 112 [AHCI_PORT_IRQ_BIT_CPDS] = "CPDS" 113 }; 114 115 static uint32_t ahci_port_read(AHCIState *s, int port, int offset) 116 { 117 uint32_t val; 118 AHCIPortRegs *pr = &s->dev[port].port_regs; 119 enum AHCIPortReg regnum = offset / sizeof(uint32_t); 120 assert(regnum < (AHCI_PORT_ADDR_OFFSET_LEN / sizeof(uint32_t))); 121 122 switch (regnum) { 123 case AHCI_PORT_REG_LST_ADDR: 124 val = pr->lst_addr; 125 break; 126 case AHCI_PORT_REG_LST_ADDR_HI: 127 val = pr->lst_addr_hi; 128 break; 129 case AHCI_PORT_REG_FIS_ADDR: 130 val = pr->fis_addr; 131 break; 132 case AHCI_PORT_REG_FIS_ADDR_HI: 133 val = pr->fis_addr_hi; 134 break; 135 case AHCI_PORT_REG_IRQ_STAT: 136 val = pr->irq_stat; 137 break; 138 case AHCI_PORT_REG_IRQ_MASK: 139 val = pr->irq_mask; 140 break; 141 case AHCI_PORT_REG_CMD: 142 val = pr->cmd; 143 break; 144 case AHCI_PORT_REG_TFDATA: 145 val = pr->tfdata; 146 break; 147 case AHCI_PORT_REG_SIG: 148 val = pr->sig; 149 break; 150 case AHCI_PORT_REG_SCR_STAT: 151 if (s->dev[port].port.ifs[0].blk) { 152 val = SATA_SCR_SSTATUS_DET_DEV_PRESENT_PHY_UP | 153 SATA_SCR_SSTATUS_SPD_GEN1 | SATA_SCR_SSTATUS_IPM_ACTIVE; 154 } else { 155 val = SATA_SCR_SSTATUS_DET_NODEV; 156 } 157 break; 158 case AHCI_PORT_REG_SCR_CTL: 159 val = pr->scr_ctl; 160 break; 161 case AHCI_PORT_REG_SCR_ERR: 162 val = pr->scr_err; 163 break; 164 case AHCI_PORT_REG_SCR_ACT: 165 val = pr->scr_act; 166 break; 167 case AHCI_PORT_REG_CMD_ISSUE: 168 val = pr->cmd_issue; 169 break; 170 default: 171 trace_ahci_port_read_default(s, port, AHCIPortReg_lookup[regnum], 172 offset); 173 val = 0; 174 } 175 176 trace_ahci_port_read(s, port, AHCIPortReg_lookup[regnum], offset, val); 177 return val; 178 } 179 180 static void ahci_irq_raise(AHCIState *s) 181 { 182 DeviceState *dev_state = s->container; 183 PCIDevice *pci_dev = (PCIDevice *) object_dynamic_cast(OBJECT(dev_state), 184 TYPE_PCI_DEVICE); 185 186 trace_ahci_irq_raise(s); 187 188 if (pci_dev && msi_enabled(pci_dev)) { 189 msi_notify(pci_dev, 0); 190 } else { 191 qemu_irq_raise(s->irq); 192 } 193 } 194 195 static void ahci_irq_lower(AHCIState *s) 196 { 197 DeviceState *dev_state = s->container; 198 PCIDevice *pci_dev = (PCIDevice *) object_dynamic_cast(OBJECT(dev_state), 199 TYPE_PCI_DEVICE); 200 201 trace_ahci_irq_lower(s); 202 203 if (!pci_dev || !msi_enabled(pci_dev)) { 204 qemu_irq_lower(s->irq); 205 } 206 } 207 208 static void ahci_check_irq(AHCIState *s) 209 { 210 int i; 211 uint32_t old_irq = s->control_regs.irqstatus; 212 213 s->control_regs.irqstatus = 0; 214 for (i = 0; i < s->ports; i++) { 215 AHCIPortRegs *pr = &s->dev[i].port_regs; 216 if (pr->irq_stat & pr->irq_mask) { 217 s->control_regs.irqstatus |= (1 << i); 218 } 219 } 220 trace_ahci_check_irq(s, old_irq, s->control_regs.irqstatus); 221 if (s->control_regs.irqstatus && 222 (s->control_regs.ghc & HOST_CTL_IRQ_EN)) { 223 ahci_irq_raise(s); 224 } else { 225 ahci_irq_lower(s); 226 } 227 } 228 229 static void ahci_trigger_irq(AHCIState *s, AHCIDevice *d, 230 enum AHCIPortIRQ irqbit) 231 { 232 g_assert((unsigned)irqbit < 32); 233 uint32_t irq = 1U << irqbit; 234 uint32_t irqstat = d->port_regs.irq_stat | irq; 235 236 trace_ahci_trigger_irq(s, d->port_no, 237 AHCIPortIRQ_lookup[irqbit], irq, 238 d->port_regs.irq_stat, irqstat, 239 irqstat & d->port_regs.irq_mask); 240 241 d->port_regs.irq_stat = irqstat; 242 ahci_check_irq(s); 243 } 244 245 static void map_page(AddressSpace *as, uint8_t **ptr, uint64_t addr, 246 uint32_t wanted) 247 { 248 hwaddr len = wanted; 249 250 if (*ptr) { 251 dma_memory_unmap(as, *ptr, len, DMA_DIRECTION_FROM_DEVICE, len); 252 } 253 254 *ptr = dma_memory_map(as, addr, &len, DMA_DIRECTION_FROM_DEVICE, 255 MEMTXATTRS_UNSPECIFIED); 256 if (len < wanted && *ptr) { 257 dma_memory_unmap(as, *ptr, len, DMA_DIRECTION_FROM_DEVICE, len); 258 *ptr = NULL; 259 } 260 } 261 262 /** 263 * Check the cmd register to see if we should start or stop 264 * the DMA or FIS RX engines. 265 * 266 * @ad: Device to dis/engage. 267 * 268 * @return 0 on success, -1 on error. 269 */ 270 static int ahci_cond_start_engines(AHCIDevice *ad) 271 { 272 AHCIPortRegs *pr = &ad->port_regs; 273 bool cmd_start = pr->cmd & PORT_CMD_START; 274 bool cmd_on = pr->cmd & PORT_CMD_LIST_ON; 275 bool fis_start = pr->cmd & PORT_CMD_FIS_RX; 276 bool fis_on = pr->cmd & PORT_CMD_FIS_ON; 277 278 if (cmd_start && !cmd_on) { 279 if (!ahci_map_clb_address(ad)) { 280 pr->cmd &= ~PORT_CMD_START; 281 error_report("AHCI: Failed to start DMA engine: " 282 "bad command list buffer address"); 283 return -1; 284 } 285 } else if (!cmd_start && cmd_on) { 286 ahci_unmap_clb_address(ad); 287 } 288 289 if (fis_start && !fis_on) { 290 if (!ahci_map_fis_address(ad)) { 291 pr->cmd &= ~PORT_CMD_FIS_RX; 292 error_report("AHCI: Failed to start FIS receive engine: " 293 "bad FIS receive buffer address"); 294 return -1; 295 } 296 } else if (!fis_start && fis_on) { 297 ahci_unmap_fis_address(ad); 298 } 299 300 return 0; 301 } 302 303 static void ahci_port_write(AHCIState *s, int port, int offset, uint32_t val) 304 { 305 AHCIPortRegs *pr = &s->dev[port].port_regs; 306 enum AHCIPortReg regnum = offset / sizeof(uint32_t); 307 assert(regnum < (AHCI_PORT_ADDR_OFFSET_LEN / sizeof(uint32_t))); 308 trace_ahci_port_write(s, port, AHCIPortReg_lookup[regnum], offset, val); 309 310 switch (regnum) { 311 case AHCI_PORT_REG_LST_ADDR: 312 pr->lst_addr = val; 313 break; 314 case AHCI_PORT_REG_LST_ADDR_HI: 315 pr->lst_addr_hi = val; 316 break; 317 case AHCI_PORT_REG_FIS_ADDR: 318 pr->fis_addr = val; 319 break; 320 case AHCI_PORT_REG_FIS_ADDR_HI: 321 pr->fis_addr_hi = val; 322 break; 323 case AHCI_PORT_REG_IRQ_STAT: 324 pr->irq_stat &= ~val; 325 ahci_check_irq(s); 326 break; 327 case AHCI_PORT_REG_IRQ_MASK: 328 pr->irq_mask = val & 0xfdc000ff; 329 ahci_check_irq(s); 330 break; 331 case AHCI_PORT_REG_CMD: 332 if ((pr->cmd & PORT_CMD_START) && !(val & PORT_CMD_START)) { 333 pr->scr_act = 0; 334 pr->cmd_issue = 0; 335 } 336 337 /* Block any Read-only fields from being set; 338 * including LIST_ON and FIS_ON. 339 * The spec requires to set ICC bits to zero after the ICC change 340 * is done. We don't support ICC state changes, therefore always 341 * force the ICC bits to zero. 342 */ 343 pr->cmd = (pr->cmd & PORT_CMD_RO_MASK) | 344 (val & ~(PORT_CMD_RO_MASK | PORT_CMD_ICC_MASK)); 345 346 /* Check FIS RX and CLB engines */ 347 ahci_cond_start_engines(&s->dev[port]); 348 349 /* XXX usually the FIS would be pending on the bus here and 350 issuing deferred until the OS enables FIS receival. 351 Instead, we only submit it once - which works in most 352 cases, but is a hack. */ 353 if ((pr->cmd & PORT_CMD_FIS_ON) && 354 !s->dev[port].init_d2h_sent) { 355 ahci_init_d2h(&s->dev[port]); 356 } 357 358 check_cmd(s, port); 359 break; 360 case AHCI_PORT_REG_TFDATA: 361 case AHCI_PORT_REG_SIG: 362 case AHCI_PORT_REG_SCR_STAT: 363 /* Read Only */ 364 break; 365 case AHCI_PORT_REG_SCR_CTL: 366 if (((pr->scr_ctl & AHCI_SCR_SCTL_DET) == 1) && 367 ((val & AHCI_SCR_SCTL_DET) == 0)) { 368 ahci_reset_port(s, port); 369 } 370 pr->scr_ctl = val; 371 break; 372 case AHCI_PORT_REG_SCR_ERR: 373 pr->scr_err &= ~val; 374 break; 375 case AHCI_PORT_REG_SCR_ACT: 376 /* RW1 */ 377 pr->scr_act |= val; 378 break; 379 case AHCI_PORT_REG_CMD_ISSUE: 380 pr->cmd_issue |= val; 381 check_cmd(s, port); 382 break; 383 default: 384 trace_ahci_port_write_unimpl(s, port, AHCIPortReg_lookup[regnum], 385 offset, val); 386 qemu_log_mask(LOG_UNIMP, "Attempted write to unimplemented register: " 387 "AHCI port %d register %s, offset 0x%x: 0x%"PRIx32, 388 port, AHCIPortReg_lookup[regnum], offset, val); 389 break; 390 } 391 } 392 393 static uint64_t ahci_mem_read_32(void *opaque, hwaddr addr) 394 { 395 AHCIState *s = opaque; 396 uint32_t val = 0; 397 398 if (addr < AHCI_GENERIC_HOST_CONTROL_REGS_MAX_ADDR) { 399 enum AHCIHostReg regnum = addr / 4; 400 assert(regnum < AHCI_HOST_REG__COUNT); 401 402 switch (regnum) { 403 case AHCI_HOST_REG_CAP: 404 val = s->control_regs.cap; 405 break; 406 case AHCI_HOST_REG_CTL: 407 val = s->control_regs.ghc; 408 break; 409 case AHCI_HOST_REG_IRQ_STAT: 410 val = s->control_regs.irqstatus; 411 break; 412 case AHCI_HOST_REG_PORTS_IMPL: 413 val = s->control_regs.impl; 414 break; 415 case AHCI_HOST_REG_VERSION: 416 val = s->control_regs.version; 417 break; 418 default: 419 trace_ahci_mem_read_32_host_default(s, AHCIHostReg_lookup[regnum], 420 addr); 421 } 422 trace_ahci_mem_read_32_host(s, AHCIHostReg_lookup[regnum], addr, val); 423 } else if ((addr >= AHCI_PORT_REGS_START_ADDR) && 424 (addr < (AHCI_PORT_REGS_START_ADDR + 425 (s->ports * AHCI_PORT_ADDR_OFFSET_LEN)))) { 426 val = ahci_port_read(s, (addr - AHCI_PORT_REGS_START_ADDR) >> 7, 427 addr & AHCI_PORT_ADDR_OFFSET_MASK); 428 } else { 429 trace_ahci_mem_read_32_default(s, addr, val); 430 } 431 432 trace_ahci_mem_read_32(s, addr, val); 433 return val; 434 } 435 436 437 /** 438 * AHCI 1.3 section 3 ("HBA Memory Registers") 439 * Support unaligned 8/16/32 bit reads, and 64 bit aligned reads. 440 * Caller is responsible for masking unwanted higher order bytes. 441 */ 442 static uint64_t ahci_mem_read(void *opaque, hwaddr addr, unsigned size) 443 { 444 hwaddr aligned = addr & ~0x3; 445 int ofst = addr - aligned; 446 uint64_t lo = ahci_mem_read_32(opaque, aligned); 447 uint64_t hi; 448 uint64_t val; 449 450 /* if < 8 byte read does not cross 4 byte boundary */ 451 if (ofst + size <= 4) { 452 val = lo >> (ofst * 8); 453 } else { 454 g_assert(size > 1); 455 456 /* If the 64bit read is unaligned, we will produce undefined 457 * results. AHCI does not support unaligned 64bit reads. */ 458 hi = ahci_mem_read_32(opaque, aligned + 4); 459 val = (hi << 32 | lo) >> (ofst * 8); 460 } 461 462 trace_ahci_mem_read(opaque, size, addr, val); 463 return val; 464 } 465 466 467 static void ahci_mem_write(void *opaque, hwaddr addr, 468 uint64_t val, unsigned size) 469 { 470 AHCIState *s = opaque; 471 472 trace_ahci_mem_write(s, size, addr, val); 473 474 /* Only aligned reads are allowed on AHCI */ 475 if (addr & 3) { 476 qemu_log_mask(LOG_GUEST_ERROR, 477 "ahci: Mis-aligned write to addr 0x%03" HWADDR_PRIX "\n", 478 addr); 479 return; 480 } 481 482 if (addr < AHCI_GENERIC_HOST_CONTROL_REGS_MAX_ADDR) { 483 enum AHCIHostReg regnum = addr / 4; 484 assert(regnum < AHCI_HOST_REG__COUNT); 485 486 switch (regnum) { 487 case AHCI_HOST_REG_CAP: /* R/WO, RO */ 488 /* FIXME handle R/WO */ 489 break; 490 case AHCI_HOST_REG_CTL: /* R/W */ 491 if (val & HOST_CTL_RESET) { 492 ahci_reset(s); 493 } else { 494 s->control_regs.ghc = (val & 0x3) | HOST_CTL_AHCI_EN; 495 ahci_check_irq(s); 496 } 497 break; 498 case AHCI_HOST_REG_IRQ_STAT: /* R/WC, RO */ 499 s->control_regs.irqstatus &= ~val; 500 ahci_check_irq(s); 501 break; 502 case AHCI_HOST_REG_PORTS_IMPL: /* R/WO, RO */ 503 /* FIXME handle R/WO */ 504 break; 505 case AHCI_HOST_REG_VERSION: /* RO */ 506 /* FIXME report write? */ 507 break; 508 default: 509 qemu_log_mask(LOG_UNIMP, 510 "Attempted write to unimplemented register: " 511 "AHCI host register %s, " 512 "offset 0x%"PRIx64": 0x%"PRIx64, 513 AHCIHostReg_lookup[regnum], addr, val); 514 trace_ahci_mem_write_host_unimpl(s, size, 515 AHCIHostReg_lookup[regnum], addr); 516 } 517 trace_ahci_mem_write_host(s, size, AHCIHostReg_lookup[regnum], 518 addr, val); 519 } else if ((addr >= AHCI_PORT_REGS_START_ADDR) && 520 (addr < (AHCI_PORT_REGS_START_ADDR + 521 (s->ports * AHCI_PORT_ADDR_OFFSET_LEN)))) { 522 ahci_port_write(s, (addr - AHCI_PORT_REGS_START_ADDR) >> 7, 523 addr & AHCI_PORT_ADDR_OFFSET_MASK, val); 524 } else { 525 qemu_log_mask(LOG_UNIMP, "Attempted write to unimplemented register: " 526 "AHCI global register at offset 0x%"PRIx64": 0x%"PRIx64, 527 addr, val); 528 trace_ahci_mem_write_unimpl(s, size, addr, val); 529 } 530 } 531 532 static const MemoryRegionOps ahci_mem_ops = { 533 .read = ahci_mem_read, 534 .write = ahci_mem_write, 535 .endianness = DEVICE_LITTLE_ENDIAN, 536 }; 537 538 static uint64_t ahci_idp_read(void *opaque, hwaddr addr, 539 unsigned size) 540 { 541 AHCIState *s = opaque; 542 543 if (addr == s->idp_offset) { 544 /* index register */ 545 return s->idp_index; 546 } else if (addr == s->idp_offset + 4) { 547 /* data register - do memory read at location selected by index */ 548 return ahci_mem_read(opaque, s->idp_index, size); 549 } else { 550 return 0; 551 } 552 } 553 554 static void ahci_idp_write(void *opaque, hwaddr addr, 555 uint64_t val, unsigned size) 556 { 557 AHCIState *s = opaque; 558 559 if (addr == s->idp_offset) { 560 /* index register - mask off reserved bits */ 561 s->idp_index = (uint32_t)val & ((AHCI_MEM_BAR_SIZE - 1) & ~3); 562 } else if (addr == s->idp_offset + 4) { 563 /* data register - do memory write at location selected by index */ 564 ahci_mem_write(opaque, s->idp_index, val, size); 565 } 566 } 567 568 static const MemoryRegionOps ahci_idp_ops = { 569 .read = ahci_idp_read, 570 .write = ahci_idp_write, 571 .endianness = DEVICE_LITTLE_ENDIAN, 572 }; 573 574 575 static void ahci_reg_init(AHCIState *s) 576 { 577 int i; 578 579 s->control_regs.cap = (s->ports - 1) | 580 (AHCI_NUM_COMMAND_SLOTS << 8) | 581 (AHCI_SUPPORTED_SPEED_GEN1 << AHCI_SUPPORTED_SPEED) | 582 HOST_CAP_NCQ | HOST_CAP_AHCI | HOST_CAP_64; 583 584 s->control_regs.impl = (1 << s->ports) - 1; 585 586 s->control_regs.version = AHCI_VERSION_1_0; 587 588 for (i = 0; i < s->ports; i++) { 589 s->dev[i].port_state = STATE_RUN; 590 } 591 } 592 593 static void check_cmd(AHCIState *s, int port) 594 { 595 AHCIPortRegs *pr = &s->dev[port].port_regs; 596 uint8_t slot; 597 598 if ((pr->cmd & PORT_CMD_START) && pr->cmd_issue) { 599 for (slot = 0; (slot < 32) && pr->cmd_issue; slot++) { 600 if (pr->cmd_issue & (1U << slot)) { 601 handle_cmd(s, port, slot); 602 } 603 } 604 } 605 } 606 607 static void ahci_check_cmd_bh(void *opaque) 608 { 609 AHCIDevice *ad = opaque; 610 611 qemu_bh_delete(ad->check_bh); 612 ad->check_bh = NULL; 613 614 check_cmd(ad->hba, ad->port_no); 615 } 616 617 static void ahci_init_d2h(AHCIDevice *ad) 618 { 619 IDEState *ide_state = &ad->port.ifs[0]; 620 AHCIPortRegs *pr = &ad->port_regs; 621 622 if (ad->init_d2h_sent) { 623 return; 624 } 625 626 if (ahci_write_fis_d2h(ad, true)) { 627 ad->init_d2h_sent = true; 628 /* We're emulating receiving the first Reg H2D Fis from the device; 629 * Update the SIG register, but otherwise proceed as normal. */ 630 pr->sig = ((uint32_t)ide_state->hcyl << 24) | 631 (ide_state->lcyl << 16) | 632 (ide_state->sector << 8) | 633 (ide_state->nsector & 0xFF); 634 } 635 } 636 637 static void ahci_set_signature(AHCIDevice *ad, uint32_t sig) 638 { 639 IDEState *s = &ad->port.ifs[0]; 640 s->hcyl = sig >> 24 & 0xFF; 641 s->lcyl = sig >> 16 & 0xFF; 642 s->sector = sig >> 8 & 0xFF; 643 s->nsector = sig & 0xFF; 644 645 trace_ahci_set_signature(ad->hba, ad->port_no, s->nsector, s->sector, 646 s->lcyl, s->hcyl, sig); 647 } 648 649 static void ahci_reset_port(AHCIState *s, int port) 650 { 651 AHCIDevice *d = &s->dev[port]; 652 AHCIPortRegs *pr = &d->port_regs; 653 IDEState *ide_state = &d->port.ifs[0]; 654 int i; 655 656 trace_ahci_reset_port(s, port); 657 658 ide_bus_reset(&d->port); 659 ide_state->ncq_queues = AHCI_MAX_CMDS; 660 661 pr->scr_stat = 0; 662 pr->scr_err = 0; 663 pr->scr_act = 0; 664 pr->tfdata = 0x7F; 665 pr->sig = 0xFFFFFFFF; 666 d->busy_slot = -1; 667 d->init_d2h_sent = false; 668 669 ide_state = &s->dev[port].port.ifs[0]; 670 if (!ide_state->blk) { 671 return; 672 } 673 674 /* reset ncq queue */ 675 for (i = 0; i < AHCI_MAX_CMDS; i++) { 676 NCQTransferState *ncq_tfs = &s->dev[port].ncq_tfs[i]; 677 ncq_tfs->halt = false; 678 if (!ncq_tfs->used) { 679 continue; 680 } 681 682 if (ncq_tfs->aiocb) { 683 blk_aio_cancel(ncq_tfs->aiocb); 684 ncq_tfs->aiocb = NULL; 685 } 686 687 /* Maybe we just finished the request thanks to blk_aio_cancel() */ 688 if (!ncq_tfs->used) { 689 continue; 690 } 691 692 qemu_sglist_destroy(&ncq_tfs->sglist); 693 ncq_tfs->used = 0; 694 } 695 696 s->dev[port].port_state = STATE_RUN; 697 if (ide_state->drive_kind == IDE_CD) { 698 ahci_set_signature(d, SATA_SIGNATURE_CDROM); 699 ide_state->status = SEEK_STAT | WRERR_STAT | READY_STAT; 700 } else { 701 ahci_set_signature(d, SATA_SIGNATURE_DISK); 702 ide_state->status = SEEK_STAT | WRERR_STAT; 703 } 704 705 ide_state->error = 1; 706 ahci_init_d2h(d); 707 } 708 709 /* Buffer pretty output based on a raw FIS structure. */ 710 static char *ahci_pretty_buffer_fis(const uint8_t *fis, int cmd_len) 711 { 712 int i; 713 GString *s = g_string_new("FIS:"); 714 715 for (i = 0; i < cmd_len; i++) { 716 if ((i & 0xf) == 0) { 717 g_string_append_printf(s, "\n0x%02x: ", i); 718 } 719 g_string_append_printf(s, "%02x ", fis[i]); 720 } 721 g_string_append_c(s, '\n'); 722 723 return g_string_free(s, FALSE); 724 } 725 726 static bool ahci_map_fis_address(AHCIDevice *ad) 727 { 728 AHCIPortRegs *pr = &ad->port_regs; 729 map_page(ad->hba->as, &ad->res_fis, 730 ((uint64_t)pr->fis_addr_hi << 32) | pr->fis_addr, 256); 731 if (ad->res_fis != NULL) { 732 pr->cmd |= PORT_CMD_FIS_ON; 733 return true; 734 } 735 736 pr->cmd &= ~PORT_CMD_FIS_ON; 737 return false; 738 } 739 740 static void ahci_unmap_fis_address(AHCIDevice *ad) 741 { 742 if (ad->res_fis == NULL) { 743 trace_ahci_unmap_fis_address_null(ad->hba, ad->port_no); 744 return; 745 } 746 ad->port_regs.cmd &= ~PORT_CMD_FIS_ON; 747 dma_memory_unmap(ad->hba->as, ad->res_fis, 256, 748 DMA_DIRECTION_FROM_DEVICE, 256); 749 ad->res_fis = NULL; 750 } 751 752 static bool ahci_map_clb_address(AHCIDevice *ad) 753 { 754 AHCIPortRegs *pr = &ad->port_regs; 755 ad->cur_cmd = NULL; 756 map_page(ad->hba->as, &ad->lst, 757 ((uint64_t)pr->lst_addr_hi << 32) | pr->lst_addr, 1024); 758 if (ad->lst != NULL) { 759 pr->cmd |= PORT_CMD_LIST_ON; 760 return true; 761 } 762 763 pr->cmd &= ~PORT_CMD_LIST_ON; 764 return false; 765 } 766 767 static void ahci_unmap_clb_address(AHCIDevice *ad) 768 { 769 if (ad->lst == NULL) { 770 trace_ahci_unmap_clb_address_null(ad->hba, ad->port_no); 771 return; 772 } 773 ad->port_regs.cmd &= ~PORT_CMD_LIST_ON; 774 dma_memory_unmap(ad->hba->as, ad->lst, 1024, 775 DMA_DIRECTION_FROM_DEVICE, 1024); 776 ad->lst = NULL; 777 } 778 779 static void ahci_write_fis_sdb(AHCIState *s, NCQTransferState *ncq_tfs) 780 { 781 AHCIDevice *ad = ncq_tfs->drive; 782 AHCIPortRegs *pr = &ad->port_regs; 783 IDEState *ide_state; 784 SDBFIS *sdb_fis; 785 786 if (!ad->res_fis || 787 !(pr->cmd & PORT_CMD_FIS_RX)) { 788 return; 789 } 790 791 sdb_fis = (SDBFIS *)&ad->res_fis[RES_FIS_SDBFIS]; 792 ide_state = &ad->port.ifs[0]; 793 794 sdb_fis->type = SATA_FIS_TYPE_SDB; 795 /* Interrupt pending & Notification bit */ 796 sdb_fis->flags = 0x40; /* Interrupt bit, always 1 for NCQ */ 797 sdb_fis->status = ide_state->status & 0x77; 798 sdb_fis->error = ide_state->error; 799 /* update SAct field in SDB_FIS */ 800 sdb_fis->payload = cpu_to_le32(ad->finished); 801 802 /* Update shadow registers (except BSY 0x80 and DRQ 0x08) */ 803 pr->tfdata = (ad->port.ifs[0].error << 8) | 804 (ad->port.ifs[0].status & 0x77) | 805 (pr->tfdata & 0x88); 806 pr->scr_act &= ~ad->finished; 807 ad->finished = 0; 808 809 /* 810 * TFES IRQ is always raised if ERR_STAT is set, regardless of I bit. 811 * If ERR_STAT is not set, trigger SDBS IRQ if interrupt bit is set 812 * (which currently, it always is). 813 */ 814 if (sdb_fis->status & ERR_STAT) { 815 ahci_trigger_irq(s, ad, AHCI_PORT_IRQ_BIT_TFES); 816 } else if (sdb_fis->flags & 0x40) { 817 ahci_trigger_irq(s, ad, AHCI_PORT_IRQ_BIT_SDBS); 818 } 819 } 820 821 static void ahci_write_fis_pio(AHCIDevice *ad, uint16_t len, bool pio_fis_i) 822 { 823 AHCIPortRegs *pr = &ad->port_regs; 824 uint8_t *pio_fis; 825 IDEState *s = &ad->port.ifs[0]; 826 827 if (!ad->res_fis || !(pr->cmd & PORT_CMD_FIS_RX)) { 828 return; 829 } 830 831 pio_fis = &ad->res_fis[RES_FIS_PSFIS]; 832 833 pio_fis[0] = SATA_FIS_TYPE_PIO_SETUP; 834 pio_fis[1] = (pio_fis_i ? (1 << 6) : 0); 835 pio_fis[2] = s->status; 836 pio_fis[3] = s->error; 837 838 pio_fis[4] = s->sector; 839 pio_fis[5] = s->lcyl; 840 pio_fis[6] = s->hcyl; 841 pio_fis[7] = s->select; 842 pio_fis[8] = s->hob_sector; 843 pio_fis[9] = s->hob_lcyl; 844 pio_fis[10] = s->hob_hcyl; 845 pio_fis[11] = 0; 846 pio_fis[12] = s->nsector & 0xFF; 847 pio_fis[13] = (s->nsector >> 8) & 0xFF; 848 pio_fis[14] = 0; 849 pio_fis[15] = s->status; 850 pio_fis[16] = len & 255; 851 pio_fis[17] = len >> 8; 852 pio_fis[18] = 0; 853 pio_fis[19] = 0; 854 855 /* Update shadow registers: */ 856 pr->tfdata = (ad->port.ifs[0].error << 8) | 857 ad->port.ifs[0].status; 858 859 if (pio_fis[2] & ERR_STAT) { 860 ahci_trigger_irq(ad->hba, ad, AHCI_PORT_IRQ_BIT_TFES); 861 } 862 } 863 864 static bool ahci_write_fis_d2h(AHCIDevice *ad, bool d2h_fis_i) 865 { 866 AHCIPortRegs *pr = &ad->port_regs; 867 uint8_t *d2h_fis; 868 int i; 869 IDEState *s = &ad->port.ifs[0]; 870 871 if (!ad->res_fis || !(pr->cmd & PORT_CMD_FIS_RX)) { 872 return false; 873 } 874 875 d2h_fis = &ad->res_fis[RES_FIS_RFIS]; 876 877 d2h_fis[0] = SATA_FIS_TYPE_REGISTER_D2H; 878 d2h_fis[1] = d2h_fis_i ? (1 << 6) : 0; /* interrupt bit */ 879 d2h_fis[2] = s->status; 880 d2h_fis[3] = s->error; 881 882 d2h_fis[4] = s->sector; 883 d2h_fis[5] = s->lcyl; 884 d2h_fis[6] = s->hcyl; 885 d2h_fis[7] = s->select; 886 d2h_fis[8] = s->hob_sector; 887 d2h_fis[9] = s->hob_lcyl; 888 d2h_fis[10] = s->hob_hcyl; 889 d2h_fis[11] = 0; 890 d2h_fis[12] = s->nsector & 0xFF; 891 d2h_fis[13] = (s->nsector >> 8) & 0xFF; 892 for (i = 14; i < 20; i++) { 893 d2h_fis[i] = 0; 894 } 895 896 /* Update shadow registers: */ 897 pr->tfdata = (ad->port.ifs[0].error << 8) | 898 ad->port.ifs[0].status; 899 900 if (d2h_fis[2] & ERR_STAT) { 901 ahci_trigger_irq(ad->hba, ad, AHCI_PORT_IRQ_BIT_TFES); 902 } 903 904 if (d2h_fis_i) { 905 ahci_trigger_irq(ad->hba, ad, AHCI_PORT_IRQ_BIT_DHRS); 906 } 907 908 return true; 909 } 910 911 static int prdt_tbl_entry_size(const AHCI_SG *tbl) 912 { 913 /* flags_size is zero-based */ 914 return (le32_to_cpu(tbl->flags_size) & AHCI_PRDT_SIZE_MASK) + 1; 915 } 916 917 /** 918 * Fetch entries in a guest-provided PRDT and convert it into a QEMU SGlist. 919 * @ad: The AHCIDevice for whom we are building the SGList. 920 * @sglist: The SGList target to add PRD entries to. 921 * @cmd: The AHCI Command Header that describes where the PRDT is. 922 * @limit: The remaining size of the S/ATA transaction, in bytes. 923 * @offset: The number of bytes already transferred, in bytes. 924 * 925 * The AHCI PRDT can describe up to 256GiB. S/ATA only support transactions of 926 * up to 32MiB as of ATA8-ACS3 rev 1b, assuming a 512 byte sector size. We stop 927 * building the sglist from the PRDT as soon as we hit @limit bytes, 928 * which is <= INT32_MAX/2GiB. 929 */ 930 static int ahci_populate_sglist(AHCIDevice *ad, QEMUSGList *sglist, 931 AHCICmdHdr *cmd, int64_t limit, uint64_t offset) 932 { 933 uint16_t opts = le16_to_cpu(cmd->opts); 934 uint16_t prdtl = le16_to_cpu(cmd->prdtl); 935 uint64_t cfis_addr = le64_to_cpu(cmd->tbl_addr); 936 uint64_t prdt_addr = cfis_addr + 0x80; 937 dma_addr_t prdt_len = (prdtl * sizeof(AHCI_SG)); 938 dma_addr_t real_prdt_len = prdt_len; 939 uint8_t *prdt; 940 int i; 941 int r = 0; 942 uint64_t sum = 0; 943 int off_idx = -1; 944 int64_t off_pos = -1; 945 int tbl_entry_size; 946 IDEBus *bus = &ad->port; 947 BusState *qbus = BUS(bus); 948 949 trace_ahci_populate_sglist(ad->hba, ad->port_no); 950 951 if (!prdtl) { 952 trace_ahci_populate_sglist_no_prdtl(ad->hba, ad->port_no, opts); 953 return -1; 954 } 955 956 /* map PRDT */ 957 if (!(prdt = dma_memory_map(ad->hba->as, prdt_addr, &prdt_len, 958 DMA_DIRECTION_TO_DEVICE, 959 MEMTXATTRS_UNSPECIFIED))){ 960 trace_ahci_populate_sglist_no_map(ad->hba, ad->port_no); 961 return -1; 962 } 963 964 if (prdt_len < real_prdt_len) { 965 trace_ahci_populate_sglist_short_map(ad->hba, ad->port_no); 966 r = -1; 967 goto out; 968 } 969 970 /* Get entries in the PRDT, init a qemu sglist accordingly */ 971 if (prdtl > 0) { 972 AHCI_SG *tbl = (AHCI_SG *)prdt; 973 sum = 0; 974 for (i = 0; i < prdtl; i++) { 975 tbl_entry_size = prdt_tbl_entry_size(&tbl[i]); 976 if (offset < (sum + tbl_entry_size)) { 977 off_idx = i; 978 off_pos = offset - sum; 979 break; 980 } 981 sum += tbl_entry_size; 982 } 983 if ((off_idx == -1) || (off_pos < 0) || (off_pos > tbl_entry_size)) { 984 trace_ahci_populate_sglist_bad_offset(ad->hba, ad->port_no, 985 off_idx, off_pos); 986 r = -1; 987 goto out; 988 } 989 990 qemu_sglist_init(sglist, qbus->parent, (prdtl - off_idx), 991 ad->hba->as); 992 qemu_sglist_add(sglist, le64_to_cpu(tbl[off_idx].addr) + off_pos, 993 MIN(prdt_tbl_entry_size(&tbl[off_idx]) - off_pos, 994 limit)); 995 996 for (i = off_idx + 1; i < prdtl && sglist->size < limit; i++) { 997 qemu_sglist_add(sglist, le64_to_cpu(tbl[i].addr), 998 MIN(prdt_tbl_entry_size(&tbl[i]), 999 limit - sglist->size)); 1000 } 1001 } 1002 1003 out: 1004 dma_memory_unmap(ad->hba->as, prdt, prdt_len, 1005 DMA_DIRECTION_TO_DEVICE, prdt_len); 1006 return r; 1007 } 1008 1009 static void ncq_err(NCQTransferState *ncq_tfs) 1010 { 1011 IDEState *ide_state = &ncq_tfs->drive->port.ifs[0]; 1012 1013 ide_state->error = ABRT_ERR; 1014 ide_state->status = READY_STAT | ERR_STAT; 1015 qemu_sglist_destroy(&ncq_tfs->sglist); 1016 ncq_tfs->used = 0; 1017 } 1018 1019 static void ncq_finish(NCQTransferState *ncq_tfs) 1020 { 1021 /* If we didn't error out, set our finished bit. Errored commands 1022 * do not get a bit set for the SDB FIS ACT register, nor do they 1023 * clear the outstanding bit in scr_act (PxSACT). */ 1024 if (ncq_tfs->used) { 1025 ncq_tfs->drive->finished |= (1 << ncq_tfs->tag); 1026 } 1027 1028 ahci_write_fis_sdb(ncq_tfs->drive->hba, ncq_tfs); 1029 1030 trace_ncq_finish(ncq_tfs->drive->hba, ncq_tfs->drive->port_no, 1031 ncq_tfs->tag); 1032 1033 block_acct_done(blk_get_stats(ncq_tfs->drive->port.ifs[0].blk), 1034 &ncq_tfs->acct); 1035 qemu_sglist_destroy(&ncq_tfs->sglist); 1036 ncq_tfs->used = 0; 1037 } 1038 1039 static void ncq_cb(void *opaque, int ret) 1040 { 1041 NCQTransferState *ncq_tfs = (NCQTransferState *)opaque; 1042 IDEState *ide_state = &ncq_tfs->drive->port.ifs[0]; 1043 1044 ncq_tfs->aiocb = NULL; 1045 1046 if (ret < 0) { 1047 bool is_read = ncq_tfs->cmd == READ_FPDMA_QUEUED; 1048 BlockErrorAction action = blk_get_error_action(ide_state->blk, 1049 is_read, -ret); 1050 if (action == BLOCK_ERROR_ACTION_STOP) { 1051 ncq_tfs->halt = true; 1052 ide_state->bus->error_status = IDE_RETRY_HBA; 1053 } else if (action == BLOCK_ERROR_ACTION_REPORT) { 1054 ncq_err(ncq_tfs); 1055 } 1056 blk_error_action(ide_state->blk, action, is_read, -ret); 1057 } else { 1058 ide_state->status = READY_STAT | SEEK_STAT; 1059 } 1060 1061 if (!ncq_tfs->halt) { 1062 ncq_finish(ncq_tfs); 1063 } 1064 } 1065 1066 static int is_ncq(uint8_t ata_cmd) 1067 { 1068 /* Based on SATA 3.2 section 13.6.3.2 */ 1069 switch (ata_cmd) { 1070 case READ_FPDMA_QUEUED: 1071 case WRITE_FPDMA_QUEUED: 1072 case NCQ_NON_DATA: 1073 case RECEIVE_FPDMA_QUEUED: 1074 case SEND_FPDMA_QUEUED: 1075 return 1; 1076 default: 1077 return 0; 1078 } 1079 } 1080 1081 static void execute_ncq_command(NCQTransferState *ncq_tfs) 1082 { 1083 AHCIDevice *ad = ncq_tfs->drive; 1084 IDEState *ide_state = &ad->port.ifs[0]; 1085 int port = ad->port_no; 1086 1087 g_assert(is_ncq(ncq_tfs->cmd)); 1088 ncq_tfs->halt = false; 1089 1090 switch (ncq_tfs->cmd) { 1091 case READ_FPDMA_QUEUED: 1092 trace_execute_ncq_command_read(ad->hba, port, ncq_tfs->tag, 1093 ncq_tfs->sector_count, ncq_tfs->lba); 1094 dma_acct_start(ide_state->blk, &ncq_tfs->acct, 1095 &ncq_tfs->sglist, BLOCK_ACCT_READ); 1096 ncq_tfs->aiocb = dma_blk_read(ide_state->blk, &ncq_tfs->sglist, 1097 ncq_tfs->lba << BDRV_SECTOR_BITS, 1098 BDRV_SECTOR_SIZE, 1099 ncq_cb, ncq_tfs); 1100 break; 1101 case WRITE_FPDMA_QUEUED: 1102 trace_execute_ncq_command_write(ad->hba, port, ncq_tfs->tag, 1103 ncq_tfs->sector_count, ncq_tfs->lba); 1104 dma_acct_start(ide_state->blk, &ncq_tfs->acct, 1105 &ncq_tfs->sglist, BLOCK_ACCT_WRITE); 1106 ncq_tfs->aiocb = dma_blk_write(ide_state->blk, &ncq_tfs->sglist, 1107 ncq_tfs->lba << BDRV_SECTOR_BITS, 1108 BDRV_SECTOR_SIZE, 1109 ncq_cb, ncq_tfs); 1110 break; 1111 default: 1112 trace_execute_ncq_command_unsup(ad->hba, port, 1113 ncq_tfs->tag, ncq_tfs->cmd); 1114 ncq_err(ncq_tfs); 1115 } 1116 } 1117 1118 1119 static void process_ncq_command(AHCIState *s, int port, const uint8_t *cmd_fis, 1120 uint8_t slot) 1121 { 1122 AHCIDevice *ad = &s->dev[port]; 1123 const NCQFrame *ncq_fis = (NCQFrame *)cmd_fis; 1124 uint8_t tag = ncq_fis->tag >> 3; 1125 NCQTransferState *ncq_tfs = &ad->ncq_tfs[tag]; 1126 size_t size; 1127 1128 g_assert(is_ncq(ncq_fis->command)); 1129 if (ncq_tfs->used) { 1130 /* error - already in use */ 1131 qemu_log_mask(LOG_GUEST_ERROR, "%s: tag %d already used\n", 1132 __func__, tag); 1133 return; 1134 } 1135 1136 /* 1137 * A NCQ command clears the bit in PxCI after the command has been QUEUED 1138 * successfully (ERROR not set, BUSY and DRQ cleared). 1139 * 1140 * For NCQ commands, PxCI will always be cleared here. 1141 * 1142 * (Once the NCQ command is COMPLETED, the device will send a SDB FIS with 1143 * the interrupt bit set, which will clear PxSACT and raise an interrupt.) 1144 */ 1145 ahci_clear_cmd_issue(ad, slot); 1146 1147 /* 1148 * In reality, for NCQ commands, PxCI is cleared after receiving a D2H FIS 1149 * without the interrupt bit set, but since ahci_write_fis_d2h() can raise 1150 * an IRQ on error, we need to call them in reverse order. 1151 */ 1152 ahci_write_fis_d2h(ad, false); 1153 1154 ncq_tfs->used = 1; 1155 ncq_tfs->drive = ad; 1156 ncq_tfs->slot = slot; 1157 ncq_tfs->cmdh = &((AHCICmdHdr *)ad->lst)[slot]; 1158 ncq_tfs->cmd = ncq_fis->command; 1159 ncq_tfs->lba = ((uint64_t)ncq_fis->lba5 << 40) | 1160 ((uint64_t)ncq_fis->lba4 << 32) | 1161 ((uint64_t)ncq_fis->lba3 << 24) | 1162 ((uint64_t)ncq_fis->lba2 << 16) | 1163 ((uint64_t)ncq_fis->lba1 << 8) | 1164 (uint64_t)ncq_fis->lba0; 1165 ncq_tfs->tag = tag; 1166 1167 /* Sanity-check the NCQ packet */ 1168 if (tag != slot) { 1169 trace_process_ncq_command_mismatch(s, port, tag, slot); 1170 } 1171 1172 if (ncq_fis->aux0 || ncq_fis->aux1 || ncq_fis->aux2 || ncq_fis->aux3) { 1173 trace_process_ncq_command_aux(s, port, tag); 1174 } 1175 if (ncq_fis->prio || ncq_fis->icc) { 1176 trace_process_ncq_command_prioicc(s, port, tag); 1177 } 1178 if (ncq_fis->fua & NCQ_FIS_FUA_MASK) { 1179 trace_process_ncq_command_fua(s, port, tag); 1180 } 1181 if (ncq_fis->tag & NCQ_FIS_RARC_MASK) { 1182 trace_process_ncq_command_rarc(s, port, tag); 1183 } 1184 1185 ncq_tfs->sector_count = ((ncq_fis->sector_count_high << 8) | 1186 ncq_fis->sector_count_low); 1187 if (!ncq_tfs->sector_count) { 1188 ncq_tfs->sector_count = 0x10000; 1189 } 1190 size = ncq_tfs->sector_count * BDRV_SECTOR_SIZE; 1191 ahci_populate_sglist(ad, &ncq_tfs->sglist, ncq_tfs->cmdh, size, 0); 1192 1193 if (ncq_tfs->sglist.size < size) { 1194 error_report("ahci: PRDT length for NCQ command (0x" DMA_ADDR_FMT ") " 1195 "is smaller than the requested size (0x%zx)", 1196 ncq_tfs->sglist.size, size); 1197 ncq_err(ncq_tfs); 1198 ahci_trigger_irq(ad->hba, ad, AHCI_PORT_IRQ_BIT_OFS); 1199 return; 1200 } else if (ncq_tfs->sglist.size != size) { 1201 trace_process_ncq_command_large(s, port, tag, 1202 ncq_tfs->sglist.size, size); 1203 } 1204 1205 trace_process_ncq_command(s, port, tag, 1206 ncq_fis->command, 1207 ncq_tfs->lba, 1208 ncq_tfs->lba + ncq_tfs->sector_count - 1); 1209 execute_ncq_command(ncq_tfs); 1210 } 1211 1212 static AHCICmdHdr *get_cmd_header(AHCIState *s, uint8_t port, uint8_t slot) 1213 { 1214 if (port >= s->ports || slot >= AHCI_MAX_CMDS) { 1215 return NULL; 1216 } 1217 1218 return s->dev[port].lst ? &((AHCICmdHdr *)s->dev[port].lst)[slot] : NULL; 1219 } 1220 1221 static void handle_reg_h2d_fis(AHCIState *s, int port, 1222 uint8_t slot, const uint8_t *cmd_fis) 1223 { 1224 IDEState *ide_state = &s->dev[port].port.ifs[0]; 1225 AHCICmdHdr *cmd = get_cmd_header(s, port, slot); 1226 AHCIDevice *ad = &s->dev[port]; 1227 uint16_t opts = le16_to_cpu(cmd->opts); 1228 1229 if (cmd_fis[1] & 0x0F) { 1230 trace_handle_reg_h2d_fis_pmp(s, port, cmd_fis[1], 1231 cmd_fis[2], cmd_fis[3]); 1232 return; 1233 } 1234 1235 if (cmd_fis[1] & 0x70) { 1236 trace_handle_reg_h2d_fis_res(s, port, cmd_fis[1], 1237 cmd_fis[2], cmd_fis[3]); 1238 return; 1239 } 1240 1241 if (!(cmd_fis[1] & SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER)) { 1242 switch (s->dev[port].port_state) { 1243 case STATE_RUN: 1244 if (cmd_fis[15] & ATA_SRST) { 1245 s->dev[port].port_state = STATE_RESET; 1246 } 1247 break; 1248 case STATE_RESET: 1249 if (!(cmd_fis[15] & ATA_SRST)) { 1250 ahci_reset_port(s, port); 1251 } 1252 break; 1253 } 1254 return; 1255 } 1256 1257 /* Check for NCQ command */ 1258 if (is_ncq(cmd_fis[2])) { 1259 process_ncq_command(s, port, cmd_fis, slot); 1260 return; 1261 } 1262 1263 /* Decompose the FIS: 1264 * AHCI does not interpret FIS packets, it only forwards them. 1265 * SATA 1.0 describes how to decode LBA28 and CHS FIS packets. 1266 * Later specifications, e.g, SATA 3.2, describe LBA48 FIS packets. 1267 * 1268 * ATA4 describes sector number for LBA28/CHS commands. 1269 * ATA6 describes sector number for LBA48 commands. 1270 * ATA8 deprecates CHS fully, describing only LBA28/48. 1271 * 1272 * We dutifully convert the FIS into IDE registers, and allow the 1273 * core layer to interpret them as needed. */ 1274 ide_state->feature = cmd_fis[3]; 1275 ide_state->sector = cmd_fis[4]; /* LBA 7:0 */ 1276 ide_state->lcyl = cmd_fis[5]; /* LBA 15:8 */ 1277 ide_state->hcyl = cmd_fis[6]; /* LBA 23:16 */ 1278 ide_state->select = cmd_fis[7]; /* LBA 27:24 (LBA28) */ 1279 ide_state->hob_sector = cmd_fis[8]; /* LBA 31:24 */ 1280 ide_state->hob_lcyl = cmd_fis[9]; /* LBA 39:32 */ 1281 ide_state->hob_hcyl = cmd_fis[10]; /* LBA 47:40 */ 1282 ide_state->hob_feature = cmd_fis[11]; 1283 ide_state->nsector = (int64_t)((cmd_fis[13] << 8) | cmd_fis[12]); 1284 /* 14, 16, 17, 18, 19: Reserved (SATA 1.0) */ 1285 /* 15: Only valid when UPDATE_COMMAND not set. */ 1286 1287 /* Copy the ACMD field (ATAPI packet, if any) from the AHCI command 1288 * table to ide_state->io_buffer */ 1289 if (opts & AHCI_CMD_ATAPI) { 1290 memcpy(ide_state->io_buffer, &cmd_fis[AHCI_COMMAND_TABLE_ACMD], 0x10); 1291 if (trace_event_get_state_backends(TRACE_HANDLE_REG_H2D_FIS_DUMP)) { 1292 char *pretty_fis = ahci_pretty_buffer_fis(ide_state->io_buffer, 0x10); 1293 trace_handle_reg_h2d_fis_dump(s, port, pretty_fis); 1294 g_free(pretty_fis); 1295 } 1296 } 1297 1298 ide_state->error = 0; 1299 s->dev[port].done_first_drq = false; 1300 /* Reset transferred byte counter */ 1301 cmd->status = 0; 1302 1303 /* 1304 * A non-NCQ command clears the bit in PxCI after the command has COMPLETED 1305 * successfully (ERROR not set, BUSY and DRQ cleared). 1306 * 1307 * For non-NCQ commands, PxCI will always be cleared by ahci_cmd_done(). 1308 */ 1309 ad->busy_slot = slot; 1310 1311 /* We're ready to process the command in FIS byte 2. */ 1312 ide_bus_exec_cmd(&s->dev[port].port, cmd_fis[2]); 1313 } 1314 1315 static void handle_cmd(AHCIState *s, int port, uint8_t slot) 1316 { 1317 IDEState *ide_state; 1318 uint64_t tbl_addr; 1319 AHCICmdHdr *cmd; 1320 uint8_t *cmd_fis; 1321 dma_addr_t cmd_len; 1322 1323 if (s->dev[port].port.ifs[0].status & (BUSY_STAT|DRQ_STAT)) { 1324 /* Engine currently busy, try again later */ 1325 trace_handle_cmd_busy(s, port); 1326 return; 1327 } 1328 1329 if (!s->dev[port].lst) { 1330 trace_handle_cmd_nolist(s, port); 1331 return; 1332 } 1333 cmd = get_cmd_header(s, port, slot); 1334 /* remember current slot handle for later */ 1335 s->dev[port].cur_cmd = cmd; 1336 1337 /* The device we are working for */ 1338 ide_state = &s->dev[port].port.ifs[0]; 1339 if (!ide_state->blk) { 1340 trace_handle_cmd_badport(s, port); 1341 return; 1342 } 1343 1344 tbl_addr = le64_to_cpu(cmd->tbl_addr); 1345 cmd_len = 0x80; 1346 cmd_fis = dma_memory_map(s->as, tbl_addr, &cmd_len, 1347 DMA_DIRECTION_TO_DEVICE, MEMTXATTRS_UNSPECIFIED); 1348 if (!cmd_fis) { 1349 trace_handle_cmd_badfis(s, port); 1350 return; 1351 } else if (cmd_len != 0x80) { 1352 ahci_trigger_irq(s, &s->dev[port], AHCI_PORT_IRQ_BIT_HBFS); 1353 trace_handle_cmd_badmap(s, port, cmd_len); 1354 goto out; 1355 } 1356 if (trace_event_get_state_backends(TRACE_HANDLE_CMD_FIS_DUMP)) { 1357 char *pretty_fis = ahci_pretty_buffer_fis(cmd_fis, 0x80); 1358 trace_handle_cmd_fis_dump(s, port, pretty_fis); 1359 g_free(pretty_fis); 1360 } 1361 switch (cmd_fis[0]) { 1362 case SATA_FIS_TYPE_REGISTER_H2D: 1363 handle_reg_h2d_fis(s, port, slot, cmd_fis); 1364 break; 1365 default: 1366 trace_handle_cmd_unhandled_fis(s, port, 1367 cmd_fis[0], cmd_fis[1], cmd_fis[2]); 1368 break; 1369 } 1370 1371 out: 1372 dma_memory_unmap(s->as, cmd_fis, cmd_len, DMA_DIRECTION_TO_DEVICE, 1373 cmd_len); 1374 } 1375 1376 /* Transfer PIO data between RAM and device */ 1377 static void ahci_pio_transfer(const IDEDMA *dma) 1378 { 1379 AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma); 1380 IDEState *s = &ad->port.ifs[0]; 1381 uint32_t size = (uint32_t)(s->data_end - s->data_ptr); 1382 /* write == ram -> device */ 1383 uint16_t opts = le16_to_cpu(ad->cur_cmd->opts); 1384 int is_write = opts & AHCI_CMD_WRITE; 1385 int is_atapi = opts & AHCI_CMD_ATAPI; 1386 int has_sglist = 0; 1387 bool pio_fis_i; 1388 1389 /* The PIO Setup FIS is received prior to transfer, but the interrupt 1390 * is only triggered after data is received. 1391 * 1392 * The device only sets the 'I' bit in the PIO Setup FIS for device->host 1393 * requests (see "DPIOI1" in the SATA spec), or for host->device DRQs after 1394 * the first (see "DPIOO1"). The latter is consistent with the spec's 1395 * description of the PACKET protocol, where the command part of ATAPI requests 1396 * ("DPKT0") has the 'I' bit clear, while the data part of PIO ATAPI requests 1397 * ("DPKT4a" and "DPKT7") has the 'I' bit set for both directions for all DRQs. 1398 */ 1399 pio_fis_i = ad->done_first_drq || (!is_atapi && !is_write); 1400 ahci_write_fis_pio(ad, size, pio_fis_i); 1401 1402 if (is_atapi && !ad->done_first_drq) { 1403 /* already prepopulated iobuffer */ 1404 goto out; 1405 } 1406 1407 if (ahci_dma_prepare_buf(dma, size)) { 1408 has_sglist = 1; 1409 } 1410 1411 trace_ahci_pio_transfer(ad->hba, ad->port_no, is_write ? "writ" : "read", 1412 size, is_atapi ? "atapi" : "ata", 1413 has_sglist ? "" : "o"); 1414 1415 if (has_sglist && size) { 1416 const MemTxAttrs attrs = MEMTXATTRS_UNSPECIFIED; 1417 1418 if (is_write) { 1419 dma_buf_write(s->data_ptr, size, NULL, &s->sg, attrs); 1420 } else { 1421 dma_buf_read(s->data_ptr, size, NULL, &s->sg, attrs); 1422 } 1423 } 1424 1425 /* Update number of transferred bytes, destroy sglist */ 1426 dma_buf_commit(s, size); 1427 1428 out: 1429 /* declare that we processed everything */ 1430 s->data_ptr = s->data_end; 1431 1432 ad->done_first_drq = true; 1433 if (pio_fis_i) { 1434 ahci_trigger_irq(ad->hba, ad, AHCI_PORT_IRQ_BIT_PSS); 1435 } 1436 } 1437 1438 static void ahci_start_dma(const IDEDMA *dma, IDEState *s, 1439 BlockCompletionFunc *dma_cb) 1440 { 1441 AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma); 1442 trace_ahci_start_dma(ad->hba, ad->port_no); 1443 s->io_buffer_offset = 0; 1444 dma_cb(s, 0); 1445 } 1446 1447 static void ahci_restart_dma(const IDEDMA *dma) 1448 { 1449 /* Nothing to do, ahci_start_dma already resets s->io_buffer_offset. */ 1450 } 1451 1452 /** 1453 * IDE/PIO restarts are handled by the core layer, but NCQ commands 1454 * need an extra kick from the AHCI HBA. 1455 */ 1456 static void ahci_restart(const IDEDMA *dma) 1457 { 1458 AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma); 1459 int i; 1460 1461 for (i = 0; i < AHCI_MAX_CMDS; i++) { 1462 NCQTransferState *ncq_tfs = &ad->ncq_tfs[i]; 1463 if (ncq_tfs->halt) { 1464 execute_ncq_command(ncq_tfs); 1465 } 1466 } 1467 } 1468 1469 /** 1470 * Called in DMA and PIO R/W chains to read the PRDT. 1471 * Not shared with NCQ pathways. 1472 */ 1473 static int32_t ahci_dma_prepare_buf(const IDEDMA *dma, int32_t limit) 1474 { 1475 AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma); 1476 IDEState *s = &ad->port.ifs[0]; 1477 1478 if (ahci_populate_sglist(ad, &s->sg, ad->cur_cmd, 1479 limit, s->io_buffer_offset) == -1) { 1480 trace_ahci_dma_prepare_buf_fail(ad->hba, ad->port_no); 1481 return -1; 1482 } 1483 s->io_buffer_size = s->sg.size; 1484 1485 trace_ahci_dma_prepare_buf(ad->hba, ad->port_no, limit, s->io_buffer_size); 1486 return s->io_buffer_size; 1487 } 1488 1489 /** 1490 * Updates the command header with a bytes-read value. 1491 * Called via dma_buf_commit, for both DMA and PIO paths. 1492 * sglist destruction is handled within dma_buf_commit. 1493 */ 1494 static void ahci_commit_buf(const IDEDMA *dma, uint32_t tx_bytes) 1495 { 1496 AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma); 1497 1498 tx_bytes += le32_to_cpu(ad->cur_cmd->status); 1499 ad->cur_cmd->status = cpu_to_le32(tx_bytes); 1500 } 1501 1502 static int ahci_dma_rw_buf(const IDEDMA *dma, bool is_write) 1503 { 1504 AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma); 1505 IDEState *s = &ad->port.ifs[0]; 1506 uint8_t *p = s->io_buffer + s->io_buffer_index; 1507 int l = s->io_buffer_size - s->io_buffer_index; 1508 1509 if (ahci_populate_sglist(ad, &s->sg, ad->cur_cmd, l, s->io_buffer_offset)) { 1510 return 0; 1511 } 1512 1513 if (is_write) { 1514 dma_buf_read(p, l, NULL, &s->sg, MEMTXATTRS_UNSPECIFIED); 1515 } else { 1516 dma_buf_write(p, l, NULL, &s->sg, MEMTXATTRS_UNSPECIFIED); 1517 } 1518 1519 /* free sglist, update byte count */ 1520 dma_buf_commit(s, l); 1521 s->io_buffer_index += l; 1522 1523 trace_ahci_dma_rw_buf(ad->hba, ad->port_no, l); 1524 return 1; 1525 } 1526 1527 static void ahci_clear_cmd_issue(AHCIDevice *ad, uint8_t slot) 1528 { 1529 IDEState *ide_state = &ad->port.ifs[0]; 1530 1531 if (!(ide_state->status & ERR_STAT) && 1532 !(ide_state->status & (BUSY_STAT | DRQ_STAT))) { 1533 ad->port_regs.cmd_issue &= ~(1 << slot); 1534 } 1535 } 1536 1537 /* Non-NCQ command is done - This function is never called for NCQ commands. */ 1538 static void ahci_cmd_done(const IDEDMA *dma) 1539 { 1540 AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma); 1541 IDEState *ide_state = &ad->port.ifs[0]; 1542 1543 trace_ahci_cmd_done(ad->hba, ad->port_no); 1544 1545 /* no longer busy */ 1546 if (ad->busy_slot != -1) { 1547 ahci_clear_cmd_issue(ad, ad->busy_slot); 1548 ad->busy_slot = -1; 1549 } 1550 1551 /* 1552 * In reality, for non-NCQ commands, PxCI is cleared after receiving a D2H 1553 * FIS with the interrupt bit set, but since ahci_write_fis_d2h() will raise 1554 * an IRQ, we need to call them in reverse order. 1555 */ 1556 ahci_write_fis_d2h(ad, true); 1557 1558 if (!(ide_state->status & ERR_STAT) && 1559 ad->port_regs.cmd_issue && !ad->check_bh) { 1560 ad->check_bh = qemu_bh_new_guarded(ahci_check_cmd_bh, ad, 1561 &ad->mem_reentrancy_guard); 1562 qemu_bh_schedule(ad->check_bh); 1563 } 1564 } 1565 1566 static void ahci_irq_set(void *opaque, int n, int level) 1567 { 1568 qemu_log_mask(LOG_UNIMP, "ahci: IRQ#%d level:%d\n", n, level); 1569 } 1570 1571 static const IDEDMAOps ahci_dma_ops = { 1572 .start_dma = ahci_start_dma, 1573 .restart = ahci_restart, 1574 .restart_dma = ahci_restart_dma, 1575 .pio_transfer = ahci_pio_transfer, 1576 .prepare_buf = ahci_dma_prepare_buf, 1577 .commit_buf = ahci_commit_buf, 1578 .rw_buf = ahci_dma_rw_buf, 1579 .cmd_done = ahci_cmd_done, 1580 }; 1581 1582 void ahci_init(AHCIState *s, DeviceState *qdev) 1583 { 1584 s->container = qdev; 1585 /* XXX BAR size should be 1k, but that breaks, so bump it to 4k for now */ 1586 memory_region_init_io(&s->mem, OBJECT(qdev), &ahci_mem_ops, s, 1587 "ahci", AHCI_MEM_BAR_SIZE); 1588 memory_region_init_io(&s->idp, OBJECT(qdev), &ahci_idp_ops, s, 1589 "ahci-idp", 32); 1590 } 1591 1592 void ahci_realize(AHCIState *s, DeviceState *qdev, AddressSpace *as, int ports) 1593 { 1594 qemu_irq *irqs; 1595 int i; 1596 1597 s->as = as; 1598 s->ports = ports; 1599 s->dev = g_new0(AHCIDevice, ports); 1600 ahci_reg_init(s); 1601 irqs = qemu_allocate_irqs(ahci_irq_set, s, s->ports); 1602 for (i = 0; i < s->ports; i++) { 1603 AHCIDevice *ad = &s->dev[i]; 1604 1605 ide_bus_init(&ad->port, sizeof(ad->port), qdev, i, 1); 1606 ide_bus_init_output_irq(&ad->port, irqs[i]); 1607 1608 ad->hba = s; 1609 ad->port_no = i; 1610 ad->port.dma = &ad->dma; 1611 ad->port.dma->ops = &ahci_dma_ops; 1612 ide_bus_register_restart_cb(&ad->port); 1613 } 1614 g_free(irqs); 1615 } 1616 1617 void ahci_uninit(AHCIState *s) 1618 { 1619 int i, j; 1620 1621 for (i = 0; i < s->ports; i++) { 1622 AHCIDevice *ad = &s->dev[i]; 1623 1624 for (j = 0; j < 2; j++) { 1625 ide_exit(&ad->port.ifs[j]); 1626 } 1627 object_unparent(OBJECT(&ad->port)); 1628 } 1629 1630 g_free(s->dev); 1631 } 1632 1633 void ahci_reset(AHCIState *s) 1634 { 1635 AHCIPortRegs *pr; 1636 int i; 1637 1638 trace_ahci_reset(s); 1639 1640 s->control_regs.irqstatus = 0; 1641 /* AHCI Enable (AE) 1642 * The implementation of this bit is dependent upon the value of the 1643 * CAP.SAM bit. If CAP.SAM is '0', then GHC.AE shall be read-write and 1644 * shall have a reset value of '0'. If CAP.SAM is '1', then AE shall be 1645 * read-only and shall have a reset value of '1'. 1646 * 1647 * We set HOST_CAP_AHCI so we must enable AHCI at reset. 1648 */ 1649 s->control_regs.ghc = HOST_CTL_AHCI_EN; 1650 1651 for (i = 0; i < s->ports; i++) { 1652 pr = &s->dev[i].port_regs; 1653 pr->irq_stat = 0; 1654 pr->irq_mask = 0; 1655 pr->scr_ctl = 0; 1656 pr->cmd = PORT_CMD_SPIN_UP | PORT_CMD_POWER_ON; 1657 ahci_reset_port(s, i); 1658 } 1659 } 1660 1661 static const VMStateDescription vmstate_ncq_tfs = { 1662 .name = "ncq state", 1663 .version_id = 1, 1664 .fields = (VMStateField[]) { 1665 VMSTATE_UINT32(sector_count, NCQTransferState), 1666 VMSTATE_UINT64(lba, NCQTransferState), 1667 VMSTATE_UINT8(tag, NCQTransferState), 1668 VMSTATE_UINT8(cmd, NCQTransferState), 1669 VMSTATE_UINT8(slot, NCQTransferState), 1670 VMSTATE_BOOL(used, NCQTransferState), 1671 VMSTATE_BOOL(halt, NCQTransferState), 1672 VMSTATE_END_OF_LIST() 1673 }, 1674 }; 1675 1676 static const VMStateDescription vmstate_ahci_device = { 1677 .name = "ahci port", 1678 .version_id = 1, 1679 .fields = (VMStateField[]) { 1680 VMSTATE_IDE_BUS(port, AHCIDevice), 1681 VMSTATE_IDE_DRIVE(port.ifs[0], AHCIDevice), 1682 VMSTATE_UINT32(port_state, AHCIDevice), 1683 VMSTATE_UINT32(finished, AHCIDevice), 1684 VMSTATE_UINT32(port_regs.lst_addr, AHCIDevice), 1685 VMSTATE_UINT32(port_regs.lst_addr_hi, AHCIDevice), 1686 VMSTATE_UINT32(port_regs.fis_addr, AHCIDevice), 1687 VMSTATE_UINT32(port_regs.fis_addr_hi, AHCIDevice), 1688 VMSTATE_UINT32(port_regs.irq_stat, AHCIDevice), 1689 VMSTATE_UINT32(port_regs.irq_mask, AHCIDevice), 1690 VMSTATE_UINT32(port_regs.cmd, AHCIDevice), 1691 VMSTATE_UINT32(port_regs.tfdata, AHCIDevice), 1692 VMSTATE_UINT32(port_regs.sig, AHCIDevice), 1693 VMSTATE_UINT32(port_regs.scr_stat, AHCIDevice), 1694 VMSTATE_UINT32(port_regs.scr_ctl, AHCIDevice), 1695 VMSTATE_UINT32(port_regs.scr_err, AHCIDevice), 1696 VMSTATE_UINT32(port_regs.scr_act, AHCIDevice), 1697 VMSTATE_UINT32(port_regs.cmd_issue, AHCIDevice), 1698 VMSTATE_BOOL(done_first_drq, AHCIDevice), 1699 VMSTATE_INT32(busy_slot, AHCIDevice), 1700 VMSTATE_BOOL(init_d2h_sent, AHCIDevice), 1701 VMSTATE_STRUCT_ARRAY(ncq_tfs, AHCIDevice, AHCI_MAX_CMDS, 1702 1, vmstate_ncq_tfs, NCQTransferState), 1703 VMSTATE_END_OF_LIST() 1704 }, 1705 }; 1706 1707 static int ahci_state_post_load(void *opaque, int version_id) 1708 { 1709 int i, j; 1710 struct AHCIDevice *ad; 1711 NCQTransferState *ncq_tfs; 1712 AHCIPortRegs *pr; 1713 AHCIState *s = opaque; 1714 1715 for (i = 0; i < s->ports; i++) { 1716 ad = &s->dev[i]; 1717 pr = &ad->port_regs; 1718 1719 if (!(pr->cmd & PORT_CMD_START) && (pr->cmd & PORT_CMD_LIST_ON)) { 1720 error_report("AHCI: DMA engine should be off, but status bit " 1721 "indicates it is still running."); 1722 return -1; 1723 } 1724 if (!(pr->cmd & PORT_CMD_FIS_RX) && (pr->cmd & PORT_CMD_FIS_ON)) { 1725 error_report("AHCI: FIS RX engine should be off, but status bit " 1726 "indicates it is still running."); 1727 return -1; 1728 } 1729 1730 /* After a migrate, the DMA/FIS engines are "off" and 1731 * need to be conditionally restarted */ 1732 pr->cmd &= ~(PORT_CMD_LIST_ON | PORT_CMD_FIS_ON); 1733 if (ahci_cond_start_engines(ad) != 0) { 1734 return -1; 1735 } 1736 1737 for (j = 0; j < AHCI_MAX_CMDS; j++) { 1738 ncq_tfs = &ad->ncq_tfs[j]; 1739 ncq_tfs->drive = ad; 1740 1741 if (ncq_tfs->used != ncq_tfs->halt) { 1742 return -1; 1743 } 1744 if (!ncq_tfs->halt) { 1745 continue; 1746 } 1747 if (!is_ncq(ncq_tfs->cmd)) { 1748 return -1; 1749 } 1750 if (ncq_tfs->slot != ncq_tfs->tag) { 1751 return -1; 1752 } 1753 /* If ncq_tfs->halt is justly set, the engine should be engaged, 1754 * and the command list buffer should be mapped. */ 1755 ncq_tfs->cmdh = get_cmd_header(s, i, ncq_tfs->slot); 1756 if (!ncq_tfs->cmdh) { 1757 return -1; 1758 } 1759 ahci_populate_sglist(ncq_tfs->drive, &ncq_tfs->sglist, 1760 ncq_tfs->cmdh, 1761 ncq_tfs->sector_count * BDRV_SECTOR_SIZE, 1762 0); 1763 if (ncq_tfs->sector_count != ncq_tfs->sglist.size >> 9) { 1764 return -1; 1765 } 1766 } 1767 1768 1769 /* 1770 * If an error is present, ad->busy_slot will be valid and not -1. 1771 * In this case, an operation is waiting to resume and will re-check 1772 * for additional AHCI commands to execute upon completion. 1773 * 1774 * In the case where no error was present, busy_slot will be -1, 1775 * and we should check to see if there are additional commands waiting. 1776 */ 1777 if (ad->busy_slot == -1) { 1778 check_cmd(s, i); 1779 } else { 1780 /* We are in the middle of a command, and may need to access 1781 * the command header in guest memory again. */ 1782 if (ad->busy_slot < 0 || ad->busy_slot >= AHCI_MAX_CMDS) { 1783 return -1; 1784 } 1785 ad->cur_cmd = get_cmd_header(s, i, ad->busy_slot); 1786 } 1787 } 1788 1789 return 0; 1790 } 1791 1792 const VMStateDescription vmstate_ahci = { 1793 .name = "ahci", 1794 .version_id = 1, 1795 .post_load = ahci_state_post_load, 1796 .fields = (VMStateField[]) { 1797 VMSTATE_STRUCT_VARRAY_POINTER_INT32(dev, AHCIState, ports, 1798 vmstate_ahci_device, AHCIDevice), 1799 VMSTATE_UINT32(control_regs.cap, AHCIState), 1800 VMSTATE_UINT32(control_regs.ghc, AHCIState), 1801 VMSTATE_UINT32(control_regs.irqstatus, AHCIState), 1802 VMSTATE_UINT32(control_regs.impl, AHCIState), 1803 VMSTATE_UINT32(control_regs.version, AHCIState), 1804 VMSTATE_UINT32(idp_index, AHCIState), 1805 VMSTATE_INT32_EQUAL(ports, AHCIState, NULL), 1806 VMSTATE_END_OF_LIST() 1807 }, 1808 }; 1809 1810 static const VMStateDescription vmstate_sysbus_ahci = { 1811 .name = "sysbus-ahci", 1812 .fields = (VMStateField[]) { 1813 VMSTATE_AHCI(ahci, SysbusAHCIState), 1814 VMSTATE_END_OF_LIST() 1815 }, 1816 }; 1817 1818 static void sysbus_ahci_reset(DeviceState *dev) 1819 { 1820 SysbusAHCIState *s = SYSBUS_AHCI(dev); 1821 1822 ahci_reset(&s->ahci); 1823 } 1824 1825 static void sysbus_ahci_init(Object *obj) 1826 { 1827 SysbusAHCIState *s = SYSBUS_AHCI(obj); 1828 SysBusDevice *sbd = SYS_BUS_DEVICE(obj); 1829 1830 ahci_init(&s->ahci, DEVICE(obj)); 1831 1832 sysbus_init_mmio(sbd, &s->ahci.mem); 1833 sysbus_init_irq(sbd, &s->ahci.irq); 1834 } 1835 1836 static void sysbus_ahci_realize(DeviceState *dev, Error **errp) 1837 { 1838 SysbusAHCIState *s = SYSBUS_AHCI(dev); 1839 1840 ahci_realize(&s->ahci, dev, &address_space_memory, s->num_ports); 1841 } 1842 1843 static Property sysbus_ahci_properties[] = { 1844 DEFINE_PROP_UINT32("num-ports", SysbusAHCIState, num_ports, 1), 1845 DEFINE_PROP_END_OF_LIST(), 1846 }; 1847 1848 static void sysbus_ahci_class_init(ObjectClass *klass, void *data) 1849 { 1850 DeviceClass *dc = DEVICE_CLASS(klass); 1851 1852 dc->realize = sysbus_ahci_realize; 1853 dc->vmsd = &vmstate_sysbus_ahci; 1854 device_class_set_props(dc, sysbus_ahci_properties); 1855 dc->reset = sysbus_ahci_reset; 1856 set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); 1857 } 1858 1859 static const TypeInfo sysbus_ahci_info = { 1860 .name = TYPE_SYSBUS_AHCI, 1861 .parent = TYPE_SYS_BUS_DEVICE, 1862 .instance_size = sizeof(SysbusAHCIState), 1863 .instance_init = sysbus_ahci_init, 1864 .class_init = sysbus_ahci_class_init, 1865 }; 1866 1867 static void sysbus_ahci_register_types(void) 1868 { 1869 type_register_static(&sysbus_ahci_info); 1870 } 1871 1872 type_init(sysbus_ahci_register_types) 1873 1874 int32_t ahci_get_num_ports(PCIDevice *dev) 1875 { 1876 AHCIPCIState *d = ICH9_AHCI(dev); 1877 AHCIState *ahci = &d->ahci; 1878 1879 return ahci->ports; 1880 } 1881 1882 void ahci_ide_create_devs(PCIDevice *dev, DriveInfo **hd) 1883 { 1884 AHCIPCIState *d = ICH9_AHCI(dev); 1885 AHCIState *ahci = &d->ahci; 1886 int i; 1887 1888 for (i = 0; i < ahci->ports; i++) { 1889 if (hd[i] == NULL) { 1890 continue; 1891 } 1892 ide_bus_create_drive(&ahci->dev[i].port, 0, hd[i]); 1893 } 1894 1895 } 1896