xref: /openbmc/qemu/hw/i386/pc.c (revision c09124dc)
1 /*
2  * QEMU PC System Emulator
3  *
4  * Copyright (c) 2003-2004 Fabrice Bellard
5  *
6  * Permission is hereby granted, free of charge, to any person obtaining a copy
7  * of this software and associated documentation files (the "Software"), to deal
8  * in the Software without restriction, including without limitation the rights
9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10  * copies of the Software, and to permit persons to whom the Software is
11  * furnished to do so, subject to the following conditions:
12  *
13  * The above copyright notice and this permission notice shall be included in
14  * all copies or substantial portions of the Software.
15  *
16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22  * THE SOFTWARE.
23  */
24 
25 #include "qemu/osdep.h"
26 #include "qemu/units.h"
27 #include "hw/i386/x86.h"
28 #include "hw/i386/pc.h"
29 #include "hw/char/serial.h"
30 #include "hw/char/parallel.h"
31 #include "hw/i386/apic.h"
32 #include "hw/i386/topology.h"
33 #include "hw/i386/fw_cfg.h"
34 #include "hw/i386/vmport.h"
35 #include "sysemu/cpus.h"
36 #include "hw/block/fdc.h"
37 #include "hw/ide.h"
38 #include "hw/pci/pci.h"
39 #include "hw/pci/pci_bus.h"
40 #include "hw/nvram/fw_cfg.h"
41 #include "hw/timer/hpet.h"
42 #include "hw/firmware/smbios.h"
43 #include "hw/loader.h"
44 #include "elf.h"
45 #include "migration/vmstate.h"
46 #include "multiboot.h"
47 #include "hw/rtc/mc146818rtc.h"
48 #include "hw/intc/i8259.h"
49 #include "hw/dma/i8257.h"
50 #include "hw/timer/i8254.h"
51 #include "hw/input/i8042.h"
52 #include "hw/irq.h"
53 #include "hw/audio/pcspk.h"
54 #include "hw/pci/msi.h"
55 #include "hw/sysbus.h"
56 #include "sysemu/sysemu.h"
57 #include "sysemu/tcg.h"
58 #include "sysemu/numa.h"
59 #include "sysemu/kvm.h"
60 #include "sysemu/xen.h"
61 #include "sysemu/reset.h"
62 #include "sysemu/runstate.h"
63 #include "kvm/kvm_i386.h"
64 #include "hw/xen/xen.h"
65 #include "hw/xen/start_info.h"
66 #include "ui/qemu-spice.h"
67 #include "exec/memory.h"
68 #include "qemu/bitmap.h"
69 #include "qemu/config-file.h"
70 #include "qemu/error-report.h"
71 #include "qemu/option.h"
72 #include "qemu/cutils.h"
73 #include "hw/acpi/acpi.h"
74 #include "hw/acpi/cpu_hotplug.h"
75 #include "acpi-build.h"
76 #include "hw/mem/pc-dimm.h"
77 #include "hw/mem/nvdimm.h"
78 #include "qapi/error.h"
79 #include "qapi/qapi-visit-common.h"
80 #include "qapi/visitor.h"
81 #include "hw/core/cpu.h"
82 #include "hw/usb.h"
83 #include "hw/i386/intel_iommu.h"
84 #include "hw/net/ne2000-isa.h"
85 #include "standard-headers/asm-x86/bootparam.h"
86 #include "hw/virtio/virtio-pmem-pci.h"
87 #include "hw/virtio/virtio-mem-pci.h"
88 #include "hw/mem/memory-device.h"
89 #include "sysemu/replay.h"
90 #include "qapi/qmp/qerror.h"
91 #include "e820_memory_layout.h"
92 #include "fw_cfg.h"
93 #include "trace.h"
94 #include CONFIG_DEVICES
95 
96 GlobalProperty pc_compat_6_1[] = {
97     { TYPE_X86_CPU, "hv-version-id-build", "0x1bbc" },
98     { TYPE_X86_CPU, "hv-version-id-major", "0x0006" },
99     { TYPE_X86_CPU, "hv-version-id-minor", "0x0001" },
100 };
101 const size_t pc_compat_6_1_len = G_N_ELEMENTS(pc_compat_6_1);
102 
103 GlobalProperty pc_compat_6_0[] = {
104     { "qemu64" "-" TYPE_X86_CPU, "family", "6" },
105     { "qemu64" "-" TYPE_X86_CPU, "model", "6" },
106     { "qemu64" "-" TYPE_X86_CPU, "stepping", "3" },
107     { TYPE_X86_CPU, "x-vendor-cpuid-only", "off" },
108     { "ICH9-LPC", ACPI_PM_PROP_ACPI_PCIHP_BRIDGE, "off" },
109 };
110 const size_t pc_compat_6_0_len = G_N_ELEMENTS(pc_compat_6_0);
111 
112 GlobalProperty pc_compat_5_2[] = {
113     { "ICH9-LPC", "x-smi-cpu-hotunplug", "off" },
114 };
115 const size_t pc_compat_5_2_len = G_N_ELEMENTS(pc_compat_5_2);
116 
117 GlobalProperty pc_compat_5_1[] = {
118     { "ICH9-LPC", "x-smi-cpu-hotplug", "off" },
119     { TYPE_X86_CPU, "kvm-msi-ext-dest-id", "off" },
120 };
121 const size_t pc_compat_5_1_len = G_N_ELEMENTS(pc_compat_5_1);
122 
123 GlobalProperty pc_compat_5_0[] = {
124 };
125 const size_t pc_compat_5_0_len = G_N_ELEMENTS(pc_compat_5_0);
126 
127 GlobalProperty pc_compat_4_2[] = {
128     { "mch", "smbase-smram", "off" },
129 };
130 const size_t pc_compat_4_2_len = G_N_ELEMENTS(pc_compat_4_2);
131 
132 GlobalProperty pc_compat_4_1[] = {};
133 const size_t pc_compat_4_1_len = G_N_ELEMENTS(pc_compat_4_1);
134 
135 GlobalProperty pc_compat_4_0[] = {};
136 const size_t pc_compat_4_0_len = G_N_ELEMENTS(pc_compat_4_0);
137 
138 GlobalProperty pc_compat_3_1[] = {
139     { "intel-iommu", "dma-drain", "off" },
140     { "Opteron_G3" "-" TYPE_X86_CPU, "rdtscp", "off" },
141     { "Opteron_G4" "-" TYPE_X86_CPU, "rdtscp", "off" },
142     { "Opteron_G4" "-" TYPE_X86_CPU, "npt", "off" },
143     { "Opteron_G4" "-" TYPE_X86_CPU, "nrip-save", "off" },
144     { "Opteron_G5" "-" TYPE_X86_CPU, "rdtscp", "off" },
145     { "Opteron_G5" "-" TYPE_X86_CPU, "npt", "off" },
146     { "Opteron_G5" "-" TYPE_X86_CPU, "nrip-save", "off" },
147     { "EPYC" "-" TYPE_X86_CPU, "npt", "off" },
148     { "EPYC" "-" TYPE_X86_CPU, "nrip-save", "off" },
149     { "EPYC-IBPB" "-" TYPE_X86_CPU, "npt", "off" },
150     { "EPYC-IBPB" "-" TYPE_X86_CPU, "nrip-save", "off" },
151     { "Skylake-Client" "-" TYPE_X86_CPU,      "mpx", "on" },
152     { "Skylake-Client-IBRS" "-" TYPE_X86_CPU, "mpx", "on" },
153     { "Skylake-Server" "-" TYPE_X86_CPU,      "mpx", "on" },
154     { "Skylake-Server-IBRS" "-" TYPE_X86_CPU, "mpx", "on" },
155     { "Cascadelake-Server" "-" TYPE_X86_CPU,  "mpx", "on" },
156     { "Icelake-Client" "-" TYPE_X86_CPU,      "mpx", "on" },
157     { "Icelake-Server" "-" TYPE_X86_CPU,      "mpx", "on" },
158     { "Cascadelake-Server" "-" TYPE_X86_CPU, "stepping", "5" },
159     { TYPE_X86_CPU, "x-intel-pt-auto-level", "off" },
160 };
161 const size_t pc_compat_3_1_len = G_N_ELEMENTS(pc_compat_3_1);
162 
163 GlobalProperty pc_compat_3_0[] = {
164     { TYPE_X86_CPU, "x-hv-synic-kvm-only", "on" },
165     { "Skylake-Server" "-" TYPE_X86_CPU, "pku", "off" },
166     { "Skylake-Server-IBRS" "-" TYPE_X86_CPU, "pku", "off" },
167 };
168 const size_t pc_compat_3_0_len = G_N_ELEMENTS(pc_compat_3_0);
169 
170 GlobalProperty pc_compat_2_12[] = {
171     { TYPE_X86_CPU, "legacy-cache", "on" },
172     { TYPE_X86_CPU, "topoext", "off" },
173     { "EPYC-" TYPE_X86_CPU, "xlevel", "0x8000000a" },
174     { "EPYC-IBPB-" TYPE_X86_CPU, "xlevel", "0x8000000a" },
175 };
176 const size_t pc_compat_2_12_len = G_N_ELEMENTS(pc_compat_2_12);
177 
178 GlobalProperty pc_compat_2_11[] = {
179     { TYPE_X86_CPU, "x-migrate-smi-count", "off" },
180     { "Skylake-Server" "-" TYPE_X86_CPU, "clflushopt", "off" },
181 };
182 const size_t pc_compat_2_11_len = G_N_ELEMENTS(pc_compat_2_11);
183 
184 GlobalProperty pc_compat_2_10[] = {
185     { TYPE_X86_CPU, "x-hv-max-vps", "0x40" },
186     { "i440FX-pcihost", "x-pci-hole64-fix", "off" },
187     { "q35-pcihost", "x-pci-hole64-fix", "off" },
188 };
189 const size_t pc_compat_2_10_len = G_N_ELEMENTS(pc_compat_2_10);
190 
191 GlobalProperty pc_compat_2_9[] = {
192     { "mch", "extended-tseg-mbytes", "0" },
193 };
194 const size_t pc_compat_2_9_len = G_N_ELEMENTS(pc_compat_2_9);
195 
196 GlobalProperty pc_compat_2_8[] = {
197     { TYPE_X86_CPU, "tcg-cpuid", "off" },
198     { "kvmclock", "x-mach-use-reliable-get-clock", "off" },
199     { "ICH9-LPC", "x-smi-broadcast", "off" },
200     { TYPE_X86_CPU, "vmware-cpuid-freq", "off" },
201     { "Haswell-" TYPE_X86_CPU, "stepping", "1" },
202 };
203 const size_t pc_compat_2_8_len = G_N_ELEMENTS(pc_compat_2_8);
204 
205 GlobalProperty pc_compat_2_7[] = {
206     { TYPE_X86_CPU, "l3-cache", "off" },
207     { TYPE_X86_CPU, "full-cpuid-auto-level", "off" },
208     { "Opteron_G3" "-" TYPE_X86_CPU, "family", "15" },
209     { "Opteron_G3" "-" TYPE_X86_CPU, "model", "6" },
210     { "Opteron_G3" "-" TYPE_X86_CPU, "stepping", "1" },
211     { "isa-pcspk", "migrate", "off" },
212 };
213 const size_t pc_compat_2_7_len = G_N_ELEMENTS(pc_compat_2_7);
214 
215 GlobalProperty pc_compat_2_6[] = {
216     { TYPE_X86_CPU, "cpuid-0xb", "off" },
217     { "vmxnet3", "romfile", "" },
218     { TYPE_X86_CPU, "fill-mtrr-mask", "off" },
219     { "apic-common", "legacy-instance-id", "on", }
220 };
221 const size_t pc_compat_2_6_len = G_N_ELEMENTS(pc_compat_2_6);
222 
223 GlobalProperty pc_compat_2_5[] = {};
224 const size_t pc_compat_2_5_len = G_N_ELEMENTS(pc_compat_2_5);
225 
226 GlobalProperty pc_compat_2_4[] = {
227     PC_CPU_MODEL_IDS("2.4.0")
228     { "Haswell-" TYPE_X86_CPU, "abm", "off" },
229     { "Haswell-noTSX-" TYPE_X86_CPU, "abm", "off" },
230     { "Broadwell-" TYPE_X86_CPU, "abm", "off" },
231     { "Broadwell-noTSX-" TYPE_X86_CPU, "abm", "off" },
232     { "host" "-" TYPE_X86_CPU, "host-cache-info", "on" },
233     { TYPE_X86_CPU, "check", "off" },
234     { "qemu64" "-" TYPE_X86_CPU, "sse4a", "on" },
235     { "qemu64" "-" TYPE_X86_CPU, "abm", "on" },
236     { "qemu64" "-" TYPE_X86_CPU, "popcnt", "on" },
237     { "qemu32" "-" TYPE_X86_CPU, "popcnt", "on" },
238     { "Opteron_G2" "-" TYPE_X86_CPU, "rdtscp", "on" },
239     { "Opteron_G3" "-" TYPE_X86_CPU, "rdtscp", "on" },
240     { "Opteron_G4" "-" TYPE_X86_CPU, "rdtscp", "on" },
241     { "Opteron_G5" "-" TYPE_X86_CPU, "rdtscp", "on", }
242 };
243 const size_t pc_compat_2_4_len = G_N_ELEMENTS(pc_compat_2_4);
244 
245 GlobalProperty pc_compat_2_3[] = {
246     PC_CPU_MODEL_IDS("2.3.0")
247     { TYPE_X86_CPU, "arat", "off" },
248     { "qemu64" "-" TYPE_X86_CPU, "min-level", "4" },
249     { "kvm64" "-" TYPE_X86_CPU, "min-level", "5" },
250     { "pentium3" "-" TYPE_X86_CPU, "min-level", "2" },
251     { "n270" "-" TYPE_X86_CPU, "min-level", "5" },
252     { "Conroe" "-" TYPE_X86_CPU, "min-level", "4" },
253     { "Penryn" "-" TYPE_X86_CPU, "min-level", "4" },
254     { "Nehalem" "-" TYPE_X86_CPU, "min-level", "4" },
255     { "n270" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
256     { "Penryn" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
257     { "Conroe" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
258     { "Nehalem" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
259     { "Westmere" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
260     { "SandyBridge" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
261     { "IvyBridge" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
262     { "Haswell" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
263     { "Haswell-noTSX" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
264     { "Broadwell" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
265     { "Broadwell-noTSX" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
266     { TYPE_X86_CPU, "kvm-no-smi-migration", "on" },
267 };
268 const size_t pc_compat_2_3_len = G_N_ELEMENTS(pc_compat_2_3);
269 
270 GlobalProperty pc_compat_2_2[] = {
271     PC_CPU_MODEL_IDS("2.2.0")
272     { "kvm64" "-" TYPE_X86_CPU, "vme", "off" },
273     { "kvm32" "-" TYPE_X86_CPU, "vme", "off" },
274     { "Conroe" "-" TYPE_X86_CPU, "vme", "off" },
275     { "Penryn" "-" TYPE_X86_CPU, "vme", "off" },
276     { "Nehalem" "-" TYPE_X86_CPU, "vme", "off" },
277     { "Westmere" "-" TYPE_X86_CPU, "vme", "off" },
278     { "SandyBridge" "-" TYPE_X86_CPU, "vme", "off" },
279     { "Haswell" "-" TYPE_X86_CPU, "vme", "off" },
280     { "Broadwell" "-" TYPE_X86_CPU, "vme", "off" },
281     { "Opteron_G1" "-" TYPE_X86_CPU, "vme", "off" },
282     { "Opteron_G2" "-" TYPE_X86_CPU, "vme", "off" },
283     { "Opteron_G3" "-" TYPE_X86_CPU, "vme", "off" },
284     { "Opteron_G4" "-" TYPE_X86_CPU, "vme", "off" },
285     { "Opteron_G5" "-" TYPE_X86_CPU, "vme", "off" },
286     { "Haswell" "-" TYPE_X86_CPU, "f16c", "off" },
287     { "Haswell" "-" TYPE_X86_CPU, "rdrand", "off" },
288     { "Broadwell" "-" TYPE_X86_CPU, "f16c", "off" },
289     { "Broadwell" "-" TYPE_X86_CPU, "rdrand", "off" },
290 };
291 const size_t pc_compat_2_2_len = G_N_ELEMENTS(pc_compat_2_2);
292 
293 GlobalProperty pc_compat_2_1[] = {
294     PC_CPU_MODEL_IDS("2.1.0")
295     { "coreduo" "-" TYPE_X86_CPU, "vmx", "on" },
296     { "core2duo" "-" TYPE_X86_CPU, "vmx", "on" },
297 };
298 const size_t pc_compat_2_1_len = G_N_ELEMENTS(pc_compat_2_1);
299 
300 GlobalProperty pc_compat_2_0[] = {
301     PC_CPU_MODEL_IDS("2.0.0")
302     { "virtio-scsi-pci", "any_layout", "off" },
303     { "PIIX4_PM", "memory-hotplug-support", "off" },
304     { "apic", "version", "0x11" },
305     { "nec-usb-xhci", "superspeed-ports-first", "off" },
306     { "nec-usb-xhci", "force-pcie-endcap", "on" },
307     { "pci-serial", "prog_if", "0" },
308     { "pci-serial-2x", "prog_if", "0" },
309     { "pci-serial-4x", "prog_if", "0" },
310     { "virtio-net-pci", "guest_announce", "off" },
311     { "ICH9-LPC", "memory-hotplug-support", "off" },
312     { "xio3130-downstream", COMPAT_PROP_PCP, "off" },
313     { "ioh3420", COMPAT_PROP_PCP, "off" },
314 };
315 const size_t pc_compat_2_0_len = G_N_ELEMENTS(pc_compat_2_0);
316 
317 GlobalProperty pc_compat_1_7[] = {
318     PC_CPU_MODEL_IDS("1.7.0")
319     { TYPE_USB_DEVICE, "msos-desc", "no" },
320     { "PIIX4_PM", ACPI_PM_PROP_ACPI_PCIHP_BRIDGE, "off" },
321     { "hpet", HPET_INTCAP, "4" },
322 };
323 const size_t pc_compat_1_7_len = G_N_ELEMENTS(pc_compat_1_7);
324 
325 GlobalProperty pc_compat_1_6[] = {
326     PC_CPU_MODEL_IDS("1.6.0")
327     { "e1000", "mitigation", "off" },
328     { "qemu64-" TYPE_X86_CPU, "model", "2" },
329     { "qemu32-" TYPE_X86_CPU, "model", "3" },
330     { "i440FX-pcihost", "short_root_bus", "1" },
331     { "q35-pcihost", "short_root_bus", "1" },
332 };
333 const size_t pc_compat_1_6_len = G_N_ELEMENTS(pc_compat_1_6);
334 
335 GlobalProperty pc_compat_1_5[] = {
336     PC_CPU_MODEL_IDS("1.5.0")
337     { "Conroe-" TYPE_X86_CPU, "model", "2" },
338     { "Conroe-" TYPE_X86_CPU, "min-level", "2" },
339     { "Penryn-" TYPE_X86_CPU, "model", "2" },
340     { "Penryn-" TYPE_X86_CPU, "min-level", "2" },
341     { "Nehalem-" TYPE_X86_CPU, "model", "2" },
342     { "Nehalem-" TYPE_X86_CPU, "min-level", "2" },
343     { "virtio-net-pci", "any_layout", "off" },
344     { TYPE_X86_CPU, "pmu", "on" },
345     { "i440FX-pcihost", "short_root_bus", "0" },
346     { "q35-pcihost", "short_root_bus", "0" },
347 };
348 const size_t pc_compat_1_5_len = G_N_ELEMENTS(pc_compat_1_5);
349 
350 GlobalProperty pc_compat_1_4[] = {
351     PC_CPU_MODEL_IDS("1.4.0")
352     { "scsi-hd", "discard_granularity", "0" },
353     { "scsi-cd", "discard_granularity", "0" },
354     { "ide-hd", "discard_granularity", "0" },
355     { "ide-cd", "discard_granularity", "0" },
356     { "virtio-blk-pci", "discard_granularity", "0" },
357     /* DEV_NVECTORS_UNSPECIFIED as a uint32_t string: */
358     { "virtio-serial-pci", "vectors", "0xFFFFFFFF" },
359     { "virtio-net-pci", "ctrl_guest_offloads", "off" },
360     { "e1000", "romfile", "pxe-e1000.rom" },
361     { "ne2k_pci", "romfile", "pxe-ne2k_pci.rom" },
362     { "pcnet", "romfile", "pxe-pcnet.rom" },
363     { "rtl8139", "romfile", "pxe-rtl8139.rom" },
364     { "virtio-net-pci", "romfile", "pxe-virtio.rom" },
365     { "486-" TYPE_X86_CPU, "model", "0" },
366     { "n270" "-" TYPE_X86_CPU, "movbe", "off" },
367     { "Westmere" "-" TYPE_X86_CPU, "pclmulqdq", "off" },
368 };
369 const size_t pc_compat_1_4_len = G_N_ELEMENTS(pc_compat_1_4);
370 
371 GSIState *pc_gsi_create(qemu_irq **irqs, bool pci_enabled)
372 {
373     GSIState *s;
374 
375     s = g_new0(GSIState, 1);
376     if (kvm_ioapic_in_kernel()) {
377         kvm_pc_setup_irq_routing(pci_enabled);
378     }
379     *irqs = qemu_allocate_irqs(gsi_handler, s, GSI_NUM_PINS);
380 
381     return s;
382 }
383 
384 static void ioport80_write(void *opaque, hwaddr addr, uint64_t data,
385                            unsigned size)
386 {
387 }
388 
389 static uint64_t ioport80_read(void *opaque, hwaddr addr, unsigned size)
390 {
391     return 0xffffffffffffffffULL;
392 }
393 
394 /* MSDOS compatibility mode FPU exception support */
395 static void ioportF0_write(void *opaque, hwaddr addr, uint64_t data,
396                            unsigned size)
397 {
398     if (tcg_enabled()) {
399         cpu_set_ignne();
400     }
401 }
402 
403 static uint64_t ioportF0_read(void *opaque, hwaddr addr, unsigned size)
404 {
405     return 0xffffffffffffffffULL;
406 }
407 
408 /* PC cmos mappings */
409 
410 #define REG_EQUIPMENT_BYTE          0x14
411 
412 static void cmos_init_hd(ISADevice *s, int type_ofs, int info_ofs,
413                          int16_t cylinders, int8_t heads, int8_t sectors)
414 {
415     rtc_set_memory(s, type_ofs, 47);
416     rtc_set_memory(s, info_ofs, cylinders);
417     rtc_set_memory(s, info_ofs + 1, cylinders >> 8);
418     rtc_set_memory(s, info_ofs + 2, heads);
419     rtc_set_memory(s, info_ofs + 3, 0xff);
420     rtc_set_memory(s, info_ofs + 4, 0xff);
421     rtc_set_memory(s, info_ofs + 5, 0xc0 | ((heads > 8) << 3));
422     rtc_set_memory(s, info_ofs + 6, cylinders);
423     rtc_set_memory(s, info_ofs + 7, cylinders >> 8);
424     rtc_set_memory(s, info_ofs + 8, sectors);
425 }
426 
427 /* convert boot_device letter to something recognizable by the bios */
428 static int boot_device2nibble(char boot_device)
429 {
430     switch(boot_device) {
431     case 'a':
432     case 'b':
433         return 0x01; /* floppy boot */
434     case 'c':
435         return 0x02; /* hard drive boot */
436     case 'd':
437         return 0x03; /* CD-ROM boot */
438     case 'n':
439         return 0x04; /* Network boot */
440     }
441     return 0;
442 }
443 
444 static void set_boot_dev(ISADevice *s, const char *boot_device, Error **errp)
445 {
446 #define PC_MAX_BOOT_DEVICES 3
447     int nbds, bds[3] = { 0, };
448     int i;
449 
450     nbds = strlen(boot_device);
451     if (nbds > PC_MAX_BOOT_DEVICES) {
452         error_setg(errp, "Too many boot devices for PC");
453         return;
454     }
455     for (i = 0; i < nbds; i++) {
456         bds[i] = boot_device2nibble(boot_device[i]);
457         if (bds[i] == 0) {
458             error_setg(errp, "Invalid boot device for PC: '%c'",
459                        boot_device[i]);
460             return;
461         }
462     }
463     rtc_set_memory(s, 0x3d, (bds[1] << 4) | bds[0]);
464     rtc_set_memory(s, 0x38, (bds[2] << 4) | (fd_bootchk ? 0x0 : 0x1));
465 }
466 
467 static void pc_boot_set(void *opaque, const char *boot_device, Error **errp)
468 {
469     set_boot_dev(opaque, boot_device, errp);
470 }
471 
472 static void pc_cmos_init_floppy(ISADevice *rtc_state, ISADevice *floppy)
473 {
474     int val, nb, i;
475     FloppyDriveType fd_type[2] = { FLOPPY_DRIVE_TYPE_NONE,
476                                    FLOPPY_DRIVE_TYPE_NONE };
477 
478     /* floppy type */
479     if (floppy) {
480         for (i = 0; i < 2; i++) {
481             fd_type[i] = isa_fdc_get_drive_type(floppy, i);
482         }
483     }
484     val = (cmos_get_fd_drive_type(fd_type[0]) << 4) |
485         cmos_get_fd_drive_type(fd_type[1]);
486     rtc_set_memory(rtc_state, 0x10, val);
487 
488     val = rtc_get_memory(rtc_state, REG_EQUIPMENT_BYTE);
489     nb = 0;
490     if (fd_type[0] != FLOPPY_DRIVE_TYPE_NONE) {
491         nb++;
492     }
493     if (fd_type[1] != FLOPPY_DRIVE_TYPE_NONE) {
494         nb++;
495     }
496     switch (nb) {
497     case 0:
498         break;
499     case 1:
500         val |= 0x01; /* 1 drive, ready for boot */
501         break;
502     case 2:
503         val |= 0x41; /* 2 drives, ready for boot */
504         break;
505     }
506     rtc_set_memory(rtc_state, REG_EQUIPMENT_BYTE, val);
507 }
508 
509 typedef struct pc_cmos_init_late_arg {
510     ISADevice *rtc_state;
511     BusState *idebus[2];
512 } pc_cmos_init_late_arg;
513 
514 typedef struct check_fdc_state {
515     ISADevice *floppy;
516     bool multiple;
517 } CheckFdcState;
518 
519 static int check_fdc(Object *obj, void *opaque)
520 {
521     CheckFdcState *state = opaque;
522     Object *fdc;
523     uint32_t iobase;
524     Error *local_err = NULL;
525 
526     fdc = object_dynamic_cast(obj, TYPE_ISA_FDC);
527     if (!fdc) {
528         return 0;
529     }
530 
531     iobase = object_property_get_uint(obj, "iobase", &local_err);
532     if (local_err || iobase != 0x3f0) {
533         error_free(local_err);
534         return 0;
535     }
536 
537     if (state->floppy) {
538         state->multiple = true;
539     } else {
540         state->floppy = ISA_DEVICE(obj);
541     }
542     return 0;
543 }
544 
545 static const char * const fdc_container_path[] = {
546     "/unattached", "/peripheral", "/peripheral-anon"
547 };
548 
549 /*
550  * Locate the FDC at IO address 0x3f0, in order to configure the CMOS registers
551  * and ACPI objects.
552  */
553 ISADevice *pc_find_fdc0(void)
554 {
555     int i;
556     Object *container;
557     CheckFdcState state = { 0 };
558 
559     for (i = 0; i < ARRAY_SIZE(fdc_container_path); i++) {
560         container = container_get(qdev_get_machine(), fdc_container_path[i]);
561         object_child_foreach(container, check_fdc, &state);
562     }
563 
564     if (state.multiple) {
565         warn_report("multiple floppy disk controllers with "
566                     "iobase=0x3f0 have been found");
567         error_printf("the one being picked for CMOS setup might not reflect "
568                      "your intent");
569     }
570 
571     return state.floppy;
572 }
573 
574 static void pc_cmos_init_late(void *opaque)
575 {
576     pc_cmos_init_late_arg *arg = opaque;
577     ISADevice *s = arg->rtc_state;
578     int16_t cylinders;
579     int8_t heads, sectors;
580     int val;
581     int i, trans;
582 
583     val = 0;
584     if (arg->idebus[0] && ide_get_geometry(arg->idebus[0], 0,
585                                            &cylinders, &heads, &sectors) >= 0) {
586         cmos_init_hd(s, 0x19, 0x1b, cylinders, heads, sectors);
587         val |= 0xf0;
588     }
589     if (arg->idebus[0] && ide_get_geometry(arg->idebus[0], 1,
590                                            &cylinders, &heads, &sectors) >= 0) {
591         cmos_init_hd(s, 0x1a, 0x24, cylinders, heads, sectors);
592         val |= 0x0f;
593     }
594     rtc_set_memory(s, 0x12, val);
595 
596     val = 0;
597     for (i = 0; i < 4; i++) {
598         /* NOTE: ide_get_geometry() returns the physical
599            geometry.  It is always such that: 1 <= sects <= 63, 1
600            <= heads <= 16, 1 <= cylinders <= 16383. The BIOS
601            geometry can be different if a translation is done. */
602         if (arg->idebus[i / 2] &&
603             ide_get_geometry(arg->idebus[i / 2], i % 2,
604                              &cylinders, &heads, &sectors) >= 0) {
605             trans = ide_get_bios_chs_trans(arg->idebus[i / 2], i % 2) - 1;
606             assert((trans & ~3) == 0);
607             val |= trans << (i * 2);
608         }
609     }
610     rtc_set_memory(s, 0x39, val);
611 
612     pc_cmos_init_floppy(s, pc_find_fdc0());
613 
614     qemu_unregister_reset(pc_cmos_init_late, opaque);
615 }
616 
617 void pc_cmos_init(PCMachineState *pcms,
618                   BusState *idebus0, BusState *idebus1,
619                   ISADevice *s)
620 {
621     int val;
622     static pc_cmos_init_late_arg arg;
623     X86MachineState *x86ms = X86_MACHINE(pcms);
624 
625     /* various important CMOS locations needed by PC/Bochs bios */
626 
627     /* memory size */
628     /* base memory (first MiB) */
629     val = MIN(x86ms->below_4g_mem_size / KiB, 640);
630     rtc_set_memory(s, 0x15, val);
631     rtc_set_memory(s, 0x16, val >> 8);
632     /* extended memory (next 64MiB) */
633     if (x86ms->below_4g_mem_size > 1 * MiB) {
634         val = (x86ms->below_4g_mem_size - 1 * MiB) / KiB;
635     } else {
636         val = 0;
637     }
638     if (val > 65535)
639         val = 65535;
640     rtc_set_memory(s, 0x17, val);
641     rtc_set_memory(s, 0x18, val >> 8);
642     rtc_set_memory(s, 0x30, val);
643     rtc_set_memory(s, 0x31, val >> 8);
644     /* memory between 16MiB and 4GiB */
645     if (x86ms->below_4g_mem_size > 16 * MiB) {
646         val = (x86ms->below_4g_mem_size - 16 * MiB) / (64 * KiB);
647     } else {
648         val = 0;
649     }
650     if (val > 65535)
651         val = 65535;
652     rtc_set_memory(s, 0x34, val);
653     rtc_set_memory(s, 0x35, val >> 8);
654     /* memory above 4GiB */
655     val = x86ms->above_4g_mem_size / 65536;
656     rtc_set_memory(s, 0x5b, val);
657     rtc_set_memory(s, 0x5c, val >> 8);
658     rtc_set_memory(s, 0x5d, val >> 16);
659 
660     object_property_add_link(OBJECT(pcms), "rtc_state",
661                              TYPE_ISA_DEVICE,
662                              (Object **)&x86ms->rtc,
663                              object_property_allow_set_link,
664                              OBJ_PROP_LINK_STRONG);
665     object_property_set_link(OBJECT(pcms), "rtc_state", OBJECT(s),
666                              &error_abort);
667 
668     set_boot_dev(s, MACHINE(pcms)->boot_order, &error_fatal);
669 
670     val = 0;
671     val |= 0x02; /* FPU is there */
672     val |= 0x04; /* PS/2 mouse installed */
673     rtc_set_memory(s, REG_EQUIPMENT_BYTE, val);
674 
675     /* hard drives and FDC */
676     arg.rtc_state = s;
677     arg.idebus[0] = idebus0;
678     arg.idebus[1] = idebus1;
679     qemu_register_reset(pc_cmos_init_late, &arg);
680 }
681 
682 static void handle_a20_line_change(void *opaque, int irq, int level)
683 {
684     X86CPU *cpu = opaque;
685 
686     /* XXX: send to all CPUs ? */
687     /* XXX: add logic to handle multiple A20 line sources */
688     x86_cpu_set_a20(cpu, level);
689 }
690 
691 #define NE2000_NB_MAX 6
692 
693 static const int ne2000_io[NE2000_NB_MAX] = { 0x300, 0x320, 0x340, 0x360,
694                                               0x280, 0x380 };
695 static const int ne2000_irq[NE2000_NB_MAX] = { 9, 10, 11, 3, 4, 5 };
696 
697 void pc_init_ne2k_isa(ISABus *bus, NICInfo *nd)
698 {
699     static int nb_ne2k = 0;
700 
701     if (nb_ne2k == NE2000_NB_MAX)
702         return;
703     isa_ne2000_init(bus, ne2000_io[nb_ne2k],
704                     ne2000_irq[nb_ne2k], nd);
705     nb_ne2k++;
706 }
707 
708 void pc_acpi_smi_interrupt(void *opaque, int irq, int level)
709 {
710     X86CPU *cpu = opaque;
711 
712     if (level) {
713         cpu_interrupt(CPU(cpu), CPU_INTERRUPT_SMI);
714     }
715 }
716 
717 static
718 void pc_machine_done(Notifier *notifier, void *data)
719 {
720     PCMachineState *pcms = container_of(notifier,
721                                         PCMachineState, machine_done);
722     X86MachineState *x86ms = X86_MACHINE(pcms);
723 
724     /* set the number of CPUs */
725     x86_rtc_set_cpus_count(x86ms->rtc, x86ms->boot_cpus);
726 
727     fw_cfg_add_extra_pci_roots(pcms->bus, x86ms->fw_cfg);
728 
729     acpi_setup();
730     if (x86ms->fw_cfg) {
731         fw_cfg_build_smbios(MACHINE(pcms), x86ms->fw_cfg);
732         fw_cfg_build_feature_control(MACHINE(pcms), x86ms->fw_cfg);
733         /* update FW_CFG_NB_CPUS to account for -device added CPUs */
734         fw_cfg_modify_i16(x86ms->fw_cfg, FW_CFG_NB_CPUS, x86ms->boot_cpus);
735     }
736 
737 
738     if (x86ms->apic_id_limit > 255 && !xen_enabled() &&
739         !kvm_irqchip_in_kernel()) {
740         error_report("current -smp configuration requires kernel "
741                      "irqchip support.");
742         exit(EXIT_FAILURE);
743     }
744 }
745 
746 void pc_guest_info_init(PCMachineState *pcms)
747 {
748     X86MachineState *x86ms = X86_MACHINE(pcms);
749 
750     x86ms->apic_xrupt_override = true;
751     pcms->machine_done.notify = pc_machine_done;
752     qemu_add_machine_init_done_notifier(&pcms->machine_done);
753 }
754 
755 /* setup pci memory address space mapping into system address space */
756 void pc_pci_as_mapping_init(Object *owner, MemoryRegion *system_memory,
757                             MemoryRegion *pci_address_space)
758 {
759     /* Set to lower priority than RAM */
760     memory_region_add_subregion_overlap(system_memory, 0x0,
761                                         pci_address_space, -1);
762 }
763 
764 void xen_load_linux(PCMachineState *pcms)
765 {
766     int i;
767     FWCfgState *fw_cfg;
768     PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms);
769     X86MachineState *x86ms = X86_MACHINE(pcms);
770 
771     assert(MACHINE(pcms)->kernel_filename != NULL);
772 
773     fw_cfg = fw_cfg_init_io(FW_CFG_IO_BASE);
774     fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, x86ms->boot_cpus);
775     rom_set_fw(fw_cfg);
776 
777     x86_load_linux(x86ms, fw_cfg, pcmc->acpi_data_size,
778                    pcmc->pvh_enabled, pcmc->linuxboot_dma_enabled);
779     for (i = 0; i < nb_option_roms; i++) {
780         assert(!strcmp(option_rom[i].name, "linuxboot.bin") ||
781                !strcmp(option_rom[i].name, "linuxboot_dma.bin") ||
782                !strcmp(option_rom[i].name, "pvh.bin") ||
783                !strcmp(option_rom[i].name, "multiboot.bin"));
784         rom_add_option(option_rom[i].name, option_rom[i].bootindex);
785     }
786     x86ms->fw_cfg = fw_cfg;
787 }
788 
789 #define PC_ROM_MIN_VGA     0xc0000
790 #define PC_ROM_MIN_OPTION  0xc8000
791 #define PC_ROM_MAX         0xe0000
792 #define PC_ROM_ALIGN       0x800
793 #define PC_ROM_SIZE        (PC_ROM_MAX - PC_ROM_MIN_VGA)
794 
795 void pc_memory_init(PCMachineState *pcms,
796                     MemoryRegion *system_memory,
797                     MemoryRegion *rom_memory,
798                     MemoryRegion **ram_memory)
799 {
800     int linux_boot, i;
801     MemoryRegion *option_rom_mr;
802     MemoryRegion *ram_below_4g, *ram_above_4g;
803     FWCfgState *fw_cfg;
804     MachineState *machine = MACHINE(pcms);
805     MachineClass *mc = MACHINE_GET_CLASS(machine);
806     PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms);
807     X86MachineState *x86ms = X86_MACHINE(pcms);
808 
809     assert(machine->ram_size == x86ms->below_4g_mem_size +
810                                 x86ms->above_4g_mem_size);
811 
812     linux_boot = (machine->kernel_filename != NULL);
813 
814     /*
815      * Split single memory region and use aliases to address portions of it,
816      * done for backwards compatibility with older qemus.
817      */
818     *ram_memory = machine->ram;
819     ram_below_4g = g_malloc(sizeof(*ram_below_4g));
820     memory_region_init_alias(ram_below_4g, NULL, "ram-below-4g", machine->ram,
821                              0, x86ms->below_4g_mem_size);
822     memory_region_add_subregion(system_memory, 0, ram_below_4g);
823     e820_add_entry(0, x86ms->below_4g_mem_size, E820_RAM);
824     if (x86ms->above_4g_mem_size > 0) {
825         ram_above_4g = g_malloc(sizeof(*ram_above_4g));
826         memory_region_init_alias(ram_above_4g, NULL, "ram-above-4g",
827                                  machine->ram,
828                                  x86ms->below_4g_mem_size,
829                                  x86ms->above_4g_mem_size);
830         memory_region_add_subregion(system_memory, 0x100000000ULL,
831                                     ram_above_4g);
832         e820_add_entry(0x100000000ULL, x86ms->above_4g_mem_size, E820_RAM);
833     }
834 
835     if (pcms->sgx_epc.size != 0) {
836         e820_add_entry(pcms->sgx_epc.base, pcms->sgx_epc.size, E820_RESERVED);
837     }
838 
839     if (!pcmc->has_reserved_memory &&
840         (machine->ram_slots ||
841          (machine->maxram_size > machine->ram_size))) {
842 
843         error_report("\"-memory 'slots|maxmem'\" is not supported by: %s",
844                      mc->name);
845         exit(EXIT_FAILURE);
846     }
847 
848     /* always allocate the device memory information */
849     machine->device_memory = g_malloc0(sizeof(*machine->device_memory));
850 
851     /* initialize device memory address space */
852     if (pcmc->has_reserved_memory &&
853         (machine->ram_size < machine->maxram_size)) {
854         ram_addr_t device_mem_size = machine->maxram_size - machine->ram_size;
855 
856         if (machine->ram_slots > ACPI_MAX_RAM_SLOTS) {
857             error_report("unsupported amount of memory slots: %"PRIu64,
858                          machine->ram_slots);
859             exit(EXIT_FAILURE);
860         }
861 
862         if (QEMU_ALIGN_UP(machine->maxram_size,
863                           TARGET_PAGE_SIZE) != machine->maxram_size) {
864             error_report("maximum memory size must by aligned to multiple of "
865                          "%d bytes", TARGET_PAGE_SIZE);
866             exit(EXIT_FAILURE);
867         }
868 
869         if (pcms->sgx_epc.size != 0) {
870             machine->device_memory->base = sgx_epc_above_4g_end(&pcms->sgx_epc);
871         } else {
872             machine->device_memory->base =
873                 0x100000000ULL + x86ms->above_4g_mem_size;
874         }
875 
876         machine->device_memory->base =
877             ROUND_UP(machine->device_memory->base, 1 * GiB);
878 
879         if (pcmc->enforce_aligned_dimm) {
880             /* size device region assuming 1G page max alignment per slot */
881             device_mem_size += (1 * GiB) * machine->ram_slots;
882         }
883 
884         if ((machine->device_memory->base + device_mem_size) <
885             device_mem_size) {
886             error_report("unsupported amount of maximum memory: " RAM_ADDR_FMT,
887                          machine->maxram_size);
888             exit(EXIT_FAILURE);
889         }
890 
891         memory_region_init(&machine->device_memory->mr, OBJECT(pcms),
892                            "device-memory", device_mem_size);
893         memory_region_add_subregion(system_memory, machine->device_memory->base,
894                                     &machine->device_memory->mr);
895     }
896 
897     /* Initialize PC system firmware */
898     pc_system_firmware_init(pcms, rom_memory);
899 
900     option_rom_mr = g_malloc(sizeof(*option_rom_mr));
901     memory_region_init_ram(option_rom_mr, NULL, "pc.rom", PC_ROM_SIZE,
902                            &error_fatal);
903     if (pcmc->pci_enabled) {
904         memory_region_set_readonly(option_rom_mr, true);
905     }
906     memory_region_add_subregion_overlap(rom_memory,
907                                         PC_ROM_MIN_VGA,
908                                         option_rom_mr,
909                                         1);
910 
911     fw_cfg = fw_cfg_arch_create(machine,
912                                 x86ms->boot_cpus, x86ms->apic_id_limit);
913 
914     rom_set_fw(fw_cfg);
915 
916     if (pcmc->has_reserved_memory && machine->device_memory->base) {
917         uint64_t *val = g_malloc(sizeof(*val));
918         PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms);
919         uint64_t res_mem_end = machine->device_memory->base;
920 
921         if (!pcmc->broken_reserved_end) {
922             res_mem_end += memory_region_size(&machine->device_memory->mr);
923         }
924         *val = cpu_to_le64(ROUND_UP(res_mem_end, 1 * GiB));
925         fw_cfg_add_file(fw_cfg, "etc/reserved-memory-end", val, sizeof(*val));
926     }
927 
928     if (linux_boot) {
929         x86_load_linux(x86ms, fw_cfg, pcmc->acpi_data_size,
930                        pcmc->pvh_enabled, pcmc->linuxboot_dma_enabled);
931     }
932 
933     for (i = 0; i < nb_option_roms; i++) {
934         rom_add_option(option_rom[i].name, option_rom[i].bootindex);
935     }
936     x86ms->fw_cfg = fw_cfg;
937 
938     /* Init default IOAPIC address space */
939     x86ms->ioapic_as = &address_space_memory;
940 
941     /* Init ACPI memory hotplug IO base address */
942     pcms->memhp_io_base = ACPI_MEMORY_HOTPLUG_BASE;
943 }
944 
945 /*
946  * The 64bit pci hole starts after "above 4G RAM" and
947  * potentially the space reserved for memory hotplug.
948  */
949 uint64_t pc_pci_hole64_start(void)
950 {
951     PCMachineState *pcms = PC_MACHINE(qdev_get_machine());
952     PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms);
953     MachineState *ms = MACHINE(pcms);
954     X86MachineState *x86ms = X86_MACHINE(pcms);
955     uint64_t hole64_start = 0;
956 
957     if (pcmc->has_reserved_memory && ms->device_memory->base) {
958         hole64_start = ms->device_memory->base;
959         if (!pcmc->broken_reserved_end) {
960             hole64_start += memory_region_size(&ms->device_memory->mr);
961         }
962     } else if (pcms->sgx_epc.size != 0) {
963             hole64_start = sgx_epc_above_4g_end(&pcms->sgx_epc);
964     } else {
965         hole64_start = 0x100000000ULL + x86ms->above_4g_mem_size;
966     }
967 
968     return ROUND_UP(hole64_start, 1 * GiB);
969 }
970 
971 DeviceState *pc_vga_init(ISABus *isa_bus, PCIBus *pci_bus)
972 {
973     DeviceState *dev = NULL;
974 
975     rom_set_order_override(FW_CFG_ORDER_OVERRIDE_VGA);
976     if (pci_bus) {
977         PCIDevice *pcidev = pci_vga_init(pci_bus);
978         dev = pcidev ? &pcidev->qdev : NULL;
979     } else if (isa_bus) {
980         ISADevice *isadev = isa_vga_init(isa_bus);
981         dev = isadev ? DEVICE(isadev) : NULL;
982     }
983     rom_reset_order_override();
984     return dev;
985 }
986 
987 static const MemoryRegionOps ioport80_io_ops = {
988     .write = ioport80_write,
989     .read = ioport80_read,
990     .endianness = DEVICE_NATIVE_ENDIAN,
991     .impl = {
992         .min_access_size = 1,
993         .max_access_size = 1,
994     },
995 };
996 
997 static const MemoryRegionOps ioportF0_io_ops = {
998     .write = ioportF0_write,
999     .read = ioportF0_read,
1000     .endianness = DEVICE_NATIVE_ENDIAN,
1001     .impl = {
1002         .min_access_size = 1,
1003         .max_access_size = 1,
1004     },
1005 };
1006 
1007 static void pc_superio_init(ISABus *isa_bus, bool create_fdctrl, bool no_vmport)
1008 {
1009     int i;
1010     DriveInfo *fd[MAX_FD];
1011     qemu_irq *a20_line;
1012     ISADevice *fdc, *i8042, *port92, *vmmouse;
1013 
1014     serial_hds_isa_init(isa_bus, 0, MAX_ISA_SERIAL_PORTS);
1015     parallel_hds_isa_init(isa_bus, MAX_PARALLEL_PORTS);
1016 
1017     for (i = 0; i < MAX_FD; i++) {
1018         fd[i] = drive_get(IF_FLOPPY, 0, i);
1019         create_fdctrl |= !!fd[i];
1020     }
1021     if (create_fdctrl) {
1022         fdc = isa_new(TYPE_ISA_FDC);
1023         if (fdc) {
1024             isa_realize_and_unref(fdc, isa_bus, &error_fatal);
1025             isa_fdc_init_drives(fdc, fd);
1026         }
1027     }
1028 
1029     i8042 = isa_create_simple(isa_bus, "i8042");
1030     if (!no_vmport) {
1031         isa_create_simple(isa_bus, TYPE_VMPORT);
1032         vmmouse = isa_try_new("vmmouse");
1033     } else {
1034         vmmouse = NULL;
1035     }
1036     if (vmmouse) {
1037         object_property_set_link(OBJECT(vmmouse), "i8042", OBJECT(i8042),
1038                                  &error_abort);
1039         isa_realize_and_unref(vmmouse, isa_bus, &error_fatal);
1040     }
1041     port92 = isa_create_simple(isa_bus, TYPE_PORT92);
1042 
1043     a20_line = qemu_allocate_irqs(handle_a20_line_change, first_cpu, 2);
1044     i8042_setup_a20_line(i8042, a20_line[0]);
1045     qdev_connect_gpio_out_named(DEVICE(port92),
1046                                 PORT92_A20_LINE, 0, a20_line[1]);
1047     g_free(a20_line);
1048 }
1049 
1050 void pc_basic_device_init(struct PCMachineState *pcms,
1051                           ISABus *isa_bus, qemu_irq *gsi,
1052                           ISADevice **rtc_state,
1053                           bool create_fdctrl,
1054                           uint32_t hpet_irqs)
1055 {
1056     int i;
1057     DeviceState *hpet = NULL;
1058     int pit_isa_irq = 0;
1059     qemu_irq pit_alt_irq = NULL;
1060     qemu_irq rtc_irq = NULL;
1061     ISADevice *pit = NULL;
1062     MemoryRegion *ioport80_io = g_new(MemoryRegion, 1);
1063     MemoryRegion *ioportF0_io = g_new(MemoryRegion, 1);
1064 
1065     memory_region_init_io(ioport80_io, NULL, &ioport80_io_ops, NULL, "ioport80", 1);
1066     memory_region_add_subregion(isa_bus->address_space_io, 0x80, ioport80_io);
1067 
1068     memory_region_init_io(ioportF0_io, NULL, &ioportF0_io_ops, NULL, "ioportF0", 1);
1069     memory_region_add_subregion(isa_bus->address_space_io, 0xf0, ioportF0_io);
1070 
1071     /*
1072      * Check if an HPET shall be created.
1073      *
1074      * Without KVM_CAP_PIT_STATE2, we cannot switch off the in-kernel PIT
1075      * when the HPET wants to take over. Thus we have to disable the latter.
1076      */
1077     if (pcms->hpet_enabled && (!kvm_irqchip_in_kernel() ||
1078                                kvm_has_pit_state2())) {
1079         hpet = qdev_try_new(TYPE_HPET);
1080         if (!hpet) {
1081             error_report("couldn't create HPET device");
1082             exit(1);
1083         }
1084         /*
1085          * For pc-piix-*, hpet's intcap is always IRQ2. For pc-q35-1.7 and
1086          * earlier, use IRQ2 for compat. Otherwise, use IRQ16~23, IRQ8 and
1087          * IRQ2.
1088          */
1089         uint8_t compat = object_property_get_uint(OBJECT(hpet),
1090                 HPET_INTCAP, NULL);
1091         if (!compat) {
1092             qdev_prop_set_uint32(hpet, HPET_INTCAP, hpet_irqs);
1093         }
1094         sysbus_realize_and_unref(SYS_BUS_DEVICE(hpet), &error_fatal);
1095         sysbus_mmio_map(SYS_BUS_DEVICE(hpet), 0, HPET_BASE);
1096 
1097         for (i = 0; i < GSI_NUM_PINS; i++) {
1098             sysbus_connect_irq(SYS_BUS_DEVICE(hpet), i, gsi[i]);
1099         }
1100         pit_isa_irq = -1;
1101         pit_alt_irq = qdev_get_gpio_in(hpet, HPET_LEGACY_PIT_INT);
1102         rtc_irq = qdev_get_gpio_in(hpet, HPET_LEGACY_RTC_INT);
1103     }
1104     *rtc_state = mc146818_rtc_init(isa_bus, 2000, rtc_irq);
1105 
1106     qemu_register_boot_set(pc_boot_set, *rtc_state);
1107 
1108     if (!xen_enabled() && pcms->pit_enabled) {
1109         if (kvm_pit_in_kernel()) {
1110             pit = kvm_pit_init(isa_bus, 0x40);
1111         } else {
1112             pit = i8254_pit_init(isa_bus, 0x40, pit_isa_irq, pit_alt_irq);
1113         }
1114         if (hpet) {
1115             /* connect PIT to output control line of the HPET */
1116             qdev_connect_gpio_out(hpet, 0, qdev_get_gpio_in(DEVICE(pit), 0));
1117         }
1118         pcspk_init(pcms->pcspk, isa_bus, pit);
1119     }
1120 
1121     i8257_dma_init(isa_bus, 0);
1122 
1123     /* Super I/O */
1124     pc_superio_init(isa_bus, create_fdctrl, pcms->vmport != ON_OFF_AUTO_ON);
1125 }
1126 
1127 void pc_nic_init(PCMachineClass *pcmc, ISABus *isa_bus, PCIBus *pci_bus)
1128 {
1129     int i;
1130 
1131     rom_set_order_override(FW_CFG_ORDER_OVERRIDE_NIC);
1132     for (i = 0; i < nb_nics; i++) {
1133         NICInfo *nd = &nd_table[i];
1134         const char *model = nd->model ? nd->model : pcmc->default_nic_model;
1135 
1136         if (g_str_equal(model, "ne2k_isa")) {
1137             pc_init_ne2k_isa(isa_bus, nd);
1138         } else {
1139             pci_nic_init_nofail(nd, pci_bus, model, NULL);
1140         }
1141     }
1142     rom_reset_order_override();
1143 }
1144 
1145 void pc_i8259_create(ISABus *isa_bus, qemu_irq *i8259_irqs)
1146 {
1147     qemu_irq *i8259;
1148 
1149     if (kvm_pic_in_kernel()) {
1150         i8259 = kvm_i8259_init(isa_bus);
1151     } else if (xen_enabled()) {
1152         i8259 = xen_interrupt_controller_init();
1153     } else {
1154         i8259 = i8259_init(isa_bus, x86_allocate_cpu_irq());
1155     }
1156 
1157     for (size_t i = 0; i < ISA_NUM_IRQS; i++) {
1158         i8259_irqs[i] = i8259[i];
1159     }
1160 
1161     g_free(i8259);
1162 }
1163 
1164 static void pc_memory_pre_plug(HotplugHandler *hotplug_dev, DeviceState *dev,
1165                                Error **errp)
1166 {
1167     const PCMachineState *pcms = PC_MACHINE(hotplug_dev);
1168     const X86MachineState *x86ms = X86_MACHINE(hotplug_dev);
1169     const PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms);
1170     const MachineState *ms = MACHINE(hotplug_dev);
1171     const bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM);
1172     const uint64_t legacy_align = TARGET_PAGE_SIZE;
1173     Error *local_err = NULL;
1174 
1175     /*
1176      * When -no-acpi is used with Q35 machine type, no ACPI is built,
1177      * but pcms->acpi_dev is still created. Check !acpi_enabled in
1178      * addition to cover this case.
1179      */
1180     if (!x86ms->acpi_dev || !x86_machine_is_acpi_enabled(x86ms)) {
1181         error_setg(errp,
1182                    "memory hotplug is not enabled: missing acpi device or acpi disabled");
1183         return;
1184     }
1185 
1186     if (is_nvdimm && !ms->nvdimms_state->is_enabled) {
1187         error_setg(errp, "nvdimm is not enabled: missing 'nvdimm' in '-M'");
1188         return;
1189     }
1190 
1191     hotplug_handler_pre_plug(x86ms->acpi_dev, dev, &local_err);
1192     if (local_err) {
1193         error_propagate(errp, local_err);
1194         return;
1195     }
1196 
1197     pc_dimm_pre_plug(PC_DIMM(dev), MACHINE(hotplug_dev),
1198                      pcmc->enforce_aligned_dimm ? NULL : &legacy_align, errp);
1199 }
1200 
1201 static void pc_memory_plug(HotplugHandler *hotplug_dev,
1202                            DeviceState *dev, Error **errp)
1203 {
1204     PCMachineState *pcms = PC_MACHINE(hotplug_dev);
1205     X86MachineState *x86ms = X86_MACHINE(hotplug_dev);
1206     MachineState *ms = MACHINE(hotplug_dev);
1207     bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM);
1208 
1209     pc_dimm_plug(PC_DIMM(dev), MACHINE(pcms));
1210 
1211     if (is_nvdimm) {
1212         nvdimm_plug(ms->nvdimms_state);
1213     }
1214 
1215     hotplug_handler_plug(x86ms->acpi_dev, dev, &error_abort);
1216 }
1217 
1218 static void pc_memory_unplug_request(HotplugHandler *hotplug_dev,
1219                                      DeviceState *dev, Error **errp)
1220 {
1221     X86MachineState *x86ms = X86_MACHINE(hotplug_dev);
1222 
1223     /*
1224      * When -no-acpi is used with Q35 machine type, no ACPI is built,
1225      * but pcms->acpi_dev is still created. Check !acpi_enabled in
1226      * addition to cover this case.
1227      */
1228     if (!x86ms->acpi_dev || !x86_machine_is_acpi_enabled(x86ms)) {
1229         error_setg(errp,
1230                    "memory hotplug is not enabled: missing acpi device or acpi disabled");
1231         return;
1232     }
1233 
1234     if (object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM)) {
1235         error_setg(errp, "nvdimm device hot unplug is not supported yet.");
1236         return;
1237     }
1238 
1239     hotplug_handler_unplug_request(x86ms->acpi_dev, dev,
1240                                    errp);
1241 }
1242 
1243 static void pc_memory_unplug(HotplugHandler *hotplug_dev,
1244                              DeviceState *dev, Error **errp)
1245 {
1246     PCMachineState *pcms = PC_MACHINE(hotplug_dev);
1247     X86MachineState *x86ms = X86_MACHINE(hotplug_dev);
1248     Error *local_err = NULL;
1249 
1250     hotplug_handler_unplug(x86ms->acpi_dev, dev, &local_err);
1251     if (local_err) {
1252         goto out;
1253     }
1254 
1255     pc_dimm_unplug(PC_DIMM(dev), MACHINE(pcms));
1256     qdev_unrealize(dev);
1257  out:
1258     error_propagate(errp, local_err);
1259 }
1260 
1261 static void pc_virtio_md_pci_pre_plug(HotplugHandler *hotplug_dev,
1262                                       DeviceState *dev, Error **errp)
1263 {
1264     HotplugHandler *hotplug_dev2 = qdev_get_bus_hotplug_handler(dev);
1265     Error *local_err = NULL;
1266 
1267     if (!hotplug_dev2 && dev->hotplugged) {
1268         /*
1269          * Without a bus hotplug handler, we cannot control the plug/unplug
1270          * order. We should never reach this point when hotplugging on x86,
1271          * however, better add a safety net.
1272          */
1273         error_setg(errp, "hotplug of virtio based memory devices not supported"
1274                    " on this bus.");
1275         return;
1276     }
1277     /*
1278      * First, see if we can plug this memory device at all. If that
1279      * succeeds, branch of to the actual hotplug handler.
1280      */
1281     memory_device_pre_plug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev), NULL,
1282                            &local_err);
1283     if (!local_err && hotplug_dev2) {
1284         hotplug_handler_pre_plug(hotplug_dev2, dev, &local_err);
1285     }
1286     error_propagate(errp, local_err);
1287 }
1288 
1289 static void pc_virtio_md_pci_plug(HotplugHandler *hotplug_dev,
1290                                   DeviceState *dev, Error **errp)
1291 {
1292     HotplugHandler *hotplug_dev2 = qdev_get_bus_hotplug_handler(dev);
1293     Error *local_err = NULL;
1294 
1295     /*
1296      * Plug the memory device first and then branch off to the actual
1297      * hotplug handler. If that one fails, we can easily undo the memory
1298      * device bits.
1299      */
1300     memory_device_plug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev));
1301     if (hotplug_dev2) {
1302         hotplug_handler_plug(hotplug_dev2, dev, &local_err);
1303         if (local_err) {
1304             memory_device_unplug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev));
1305         }
1306     }
1307     error_propagate(errp, local_err);
1308 }
1309 
1310 static void pc_virtio_md_pci_unplug_request(HotplugHandler *hotplug_dev,
1311                                             DeviceState *dev, Error **errp)
1312 {
1313     /* We don't support hot unplug of virtio based memory devices */
1314     error_setg(errp, "virtio based memory devices cannot be unplugged.");
1315 }
1316 
1317 static void pc_virtio_md_pci_unplug(HotplugHandler *hotplug_dev,
1318                                     DeviceState *dev, Error **errp)
1319 {
1320     /* We don't support hot unplug of virtio based memory devices */
1321 }
1322 
1323 static void pc_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev,
1324                                           DeviceState *dev, Error **errp)
1325 {
1326     if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
1327         pc_memory_pre_plug(hotplug_dev, dev, errp);
1328     } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) {
1329         x86_cpu_pre_plug(hotplug_dev, dev, errp);
1330     } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI) ||
1331                object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_MEM_PCI)) {
1332         pc_virtio_md_pci_pre_plug(hotplug_dev, dev, errp);
1333     }
1334 }
1335 
1336 static void pc_machine_device_plug_cb(HotplugHandler *hotplug_dev,
1337                                       DeviceState *dev, Error **errp)
1338 {
1339     if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
1340         pc_memory_plug(hotplug_dev, dev, errp);
1341     } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) {
1342         x86_cpu_plug(hotplug_dev, dev, errp);
1343     } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI) ||
1344                object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_MEM_PCI)) {
1345         pc_virtio_md_pci_plug(hotplug_dev, dev, errp);
1346     }
1347 }
1348 
1349 static void pc_machine_device_unplug_request_cb(HotplugHandler *hotplug_dev,
1350                                                 DeviceState *dev, Error **errp)
1351 {
1352     if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
1353         pc_memory_unplug_request(hotplug_dev, dev, errp);
1354     } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) {
1355         x86_cpu_unplug_request_cb(hotplug_dev, dev, errp);
1356     } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI) ||
1357                object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_MEM_PCI)) {
1358         pc_virtio_md_pci_unplug_request(hotplug_dev, dev, errp);
1359     } else {
1360         error_setg(errp, "acpi: device unplug request for not supported device"
1361                    " type: %s", object_get_typename(OBJECT(dev)));
1362     }
1363 }
1364 
1365 static void pc_machine_device_unplug_cb(HotplugHandler *hotplug_dev,
1366                                         DeviceState *dev, Error **errp)
1367 {
1368     if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
1369         pc_memory_unplug(hotplug_dev, dev, errp);
1370     } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) {
1371         x86_cpu_unplug_cb(hotplug_dev, dev, errp);
1372     } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI) ||
1373                object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_MEM_PCI)) {
1374         pc_virtio_md_pci_unplug(hotplug_dev, dev, errp);
1375     } else {
1376         error_setg(errp, "acpi: device unplug for not supported device"
1377                    " type: %s", object_get_typename(OBJECT(dev)));
1378     }
1379 }
1380 
1381 static HotplugHandler *pc_get_hotplug_handler(MachineState *machine,
1382                                              DeviceState *dev)
1383 {
1384     if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM) ||
1385         object_dynamic_cast(OBJECT(dev), TYPE_CPU) ||
1386         object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI) ||
1387         object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_MEM_PCI)) {
1388         return HOTPLUG_HANDLER(machine);
1389     }
1390 
1391     return NULL;
1392 }
1393 
1394 static void
1395 pc_machine_get_device_memory_region_size(Object *obj, Visitor *v,
1396                                          const char *name, void *opaque,
1397                                          Error **errp)
1398 {
1399     MachineState *ms = MACHINE(obj);
1400     int64_t value = 0;
1401 
1402     if (ms->device_memory) {
1403         value = memory_region_size(&ms->device_memory->mr);
1404     }
1405 
1406     visit_type_int(v, name, &value, errp);
1407 }
1408 
1409 static void pc_machine_get_vmport(Object *obj, Visitor *v, const char *name,
1410                                   void *opaque, Error **errp)
1411 {
1412     PCMachineState *pcms = PC_MACHINE(obj);
1413     OnOffAuto vmport = pcms->vmport;
1414 
1415     visit_type_OnOffAuto(v, name, &vmport, errp);
1416 }
1417 
1418 static void pc_machine_set_vmport(Object *obj, Visitor *v, const char *name,
1419                                   void *opaque, Error **errp)
1420 {
1421     PCMachineState *pcms = PC_MACHINE(obj);
1422 
1423     visit_type_OnOffAuto(v, name, &pcms->vmport, errp);
1424 }
1425 
1426 static bool pc_machine_get_smbus(Object *obj, Error **errp)
1427 {
1428     PCMachineState *pcms = PC_MACHINE(obj);
1429 
1430     return pcms->smbus_enabled;
1431 }
1432 
1433 static void pc_machine_set_smbus(Object *obj, bool value, Error **errp)
1434 {
1435     PCMachineState *pcms = PC_MACHINE(obj);
1436 
1437     pcms->smbus_enabled = value;
1438 }
1439 
1440 static bool pc_machine_get_sata(Object *obj, Error **errp)
1441 {
1442     PCMachineState *pcms = PC_MACHINE(obj);
1443 
1444     return pcms->sata_enabled;
1445 }
1446 
1447 static void pc_machine_set_sata(Object *obj, bool value, Error **errp)
1448 {
1449     PCMachineState *pcms = PC_MACHINE(obj);
1450 
1451     pcms->sata_enabled = value;
1452 }
1453 
1454 static bool pc_machine_get_pit(Object *obj, Error **errp)
1455 {
1456     PCMachineState *pcms = PC_MACHINE(obj);
1457 
1458     return pcms->pit_enabled;
1459 }
1460 
1461 static void pc_machine_set_pit(Object *obj, bool value, Error **errp)
1462 {
1463     PCMachineState *pcms = PC_MACHINE(obj);
1464 
1465     pcms->pit_enabled = value;
1466 }
1467 
1468 static bool pc_machine_get_hpet(Object *obj, Error **errp)
1469 {
1470     PCMachineState *pcms = PC_MACHINE(obj);
1471 
1472     return pcms->hpet_enabled;
1473 }
1474 
1475 static void pc_machine_set_hpet(Object *obj, bool value, Error **errp)
1476 {
1477     PCMachineState *pcms = PC_MACHINE(obj);
1478 
1479     pcms->hpet_enabled = value;
1480 }
1481 
1482 static bool pc_machine_get_default_bus_bypass_iommu(Object *obj, Error **errp)
1483 {
1484     PCMachineState *pcms = PC_MACHINE(obj);
1485 
1486     return pcms->default_bus_bypass_iommu;
1487 }
1488 
1489 static void pc_machine_set_default_bus_bypass_iommu(Object *obj, bool value,
1490                                                     Error **errp)
1491 {
1492     PCMachineState *pcms = PC_MACHINE(obj);
1493 
1494     pcms->default_bus_bypass_iommu = value;
1495 }
1496 
1497 static void pc_machine_get_max_ram_below_4g(Object *obj, Visitor *v,
1498                                             const char *name, void *opaque,
1499                                             Error **errp)
1500 {
1501     PCMachineState *pcms = PC_MACHINE(obj);
1502     uint64_t value = pcms->max_ram_below_4g;
1503 
1504     visit_type_size(v, name, &value, errp);
1505 }
1506 
1507 static void pc_machine_set_max_ram_below_4g(Object *obj, Visitor *v,
1508                                             const char *name, void *opaque,
1509                                             Error **errp)
1510 {
1511     PCMachineState *pcms = PC_MACHINE(obj);
1512     uint64_t value;
1513 
1514     if (!visit_type_size(v, name, &value, errp)) {
1515         return;
1516     }
1517     if (value > 4 * GiB) {
1518         error_setg(errp,
1519                    "Machine option 'max-ram-below-4g=%"PRIu64
1520                    "' expects size less than or equal to 4G", value);
1521         return;
1522     }
1523 
1524     if (value < 1 * MiB) {
1525         warn_report("Only %" PRIu64 " bytes of RAM below the 4GiB boundary,"
1526                     "BIOS may not work with less than 1MiB", value);
1527     }
1528 
1529     pcms->max_ram_below_4g = value;
1530 }
1531 
1532 static void pc_machine_get_max_fw_size(Object *obj, Visitor *v,
1533                                        const char *name, void *opaque,
1534                                        Error **errp)
1535 {
1536     PCMachineState *pcms = PC_MACHINE(obj);
1537     uint64_t value = pcms->max_fw_size;
1538 
1539     visit_type_size(v, name, &value, errp);
1540 }
1541 
1542 static void pc_machine_set_max_fw_size(Object *obj, Visitor *v,
1543                                        const char *name, void *opaque,
1544                                        Error **errp)
1545 {
1546     PCMachineState *pcms = PC_MACHINE(obj);
1547     Error *error = NULL;
1548     uint64_t value;
1549 
1550     visit_type_size(v, name, &value, &error);
1551     if (error) {
1552         error_propagate(errp, error);
1553         return;
1554     }
1555 
1556     /*
1557     * We don't have a theoretically justifiable exact lower bound on the base
1558     * address of any flash mapping. In practice, the IO-APIC MMIO range is
1559     * [0xFEE00000..0xFEE01000] -- see IO_APIC_DEFAULT_ADDRESS --, leaving free
1560     * only 18MB-4KB below 4G. For now, restrict the cumulative mapping to 8MB in
1561     * size.
1562     */
1563     if (value > 16 * MiB) {
1564         error_setg(errp,
1565                    "User specified max allowed firmware size %" PRIu64 " is "
1566                    "greater than 16MiB. If combined firwmare size exceeds "
1567                    "16MiB the system may not boot, or experience intermittent"
1568                    "stability issues.",
1569                    value);
1570         return;
1571     }
1572 
1573     pcms->max_fw_size = value;
1574 }
1575 
1576 
1577 static void pc_machine_initfn(Object *obj)
1578 {
1579     PCMachineState *pcms = PC_MACHINE(obj);
1580 
1581 #ifdef CONFIG_VMPORT
1582     pcms->vmport = ON_OFF_AUTO_AUTO;
1583 #else
1584     pcms->vmport = ON_OFF_AUTO_OFF;
1585 #endif /* CONFIG_VMPORT */
1586     pcms->max_ram_below_4g = 0; /* use default */
1587     /* acpi build is enabled by default if machine supports it */
1588     pcms->acpi_build_enabled = PC_MACHINE_GET_CLASS(pcms)->has_acpi_build;
1589     pcms->smbus_enabled = true;
1590     pcms->sata_enabled = true;
1591     pcms->pit_enabled = true;
1592     pcms->max_fw_size = 8 * MiB;
1593 #ifdef CONFIG_HPET
1594     pcms->hpet_enabled = true;
1595 #endif
1596     pcms->default_bus_bypass_iommu = false;
1597 
1598     pc_system_flash_create(pcms);
1599     pcms->pcspk = isa_new(TYPE_PC_SPEAKER);
1600     object_property_add_alias(OBJECT(pcms), "pcspk-audiodev",
1601                               OBJECT(pcms->pcspk), "audiodev");
1602 }
1603 
1604 static void pc_machine_reset(MachineState *machine)
1605 {
1606     CPUState *cs;
1607     X86CPU *cpu;
1608 
1609     qemu_devices_reset();
1610 
1611     /* Reset APIC after devices have been reset to cancel
1612      * any changes that qemu_devices_reset() might have done.
1613      */
1614     CPU_FOREACH(cs) {
1615         cpu = X86_CPU(cs);
1616 
1617         if (cpu->apic_state) {
1618             device_legacy_reset(cpu->apic_state);
1619         }
1620     }
1621 }
1622 
1623 static void pc_machine_wakeup(MachineState *machine)
1624 {
1625     cpu_synchronize_all_states();
1626     pc_machine_reset(machine);
1627     cpu_synchronize_all_post_reset();
1628 }
1629 
1630 static bool pc_hotplug_allowed(MachineState *ms, DeviceState *dev, Error **errp)
1631 {
1632     X86IOMMUState *iommu = x86_iommu_get_default();
1633     IntelIOMMUState *intel_iommu;
1634 
1635     if (iommu &&
1636         object_dynamic_cast((Object *)iommu, TYPE_INTEL_IOMMU_DEVICE) &&
1637         object_dynamic_cast((Object *)dev, "vfio-pci")) {
1638         intel_iommu = INTEL_IOMMU_DEVICE(iommu);
1639         if (!intel_iommu->caching_mode) {
1640             error_setg(errp, "Device assignment is not allowed without "
1641                        "enabling caching-mode=on for Intel IOMMU.");
1642             return false;
1643         }
1644     }
1645 
1646     return true;
1647 }
1648 
1649 static void pc_machine_class_init(ObjectClass *oc, void *data)
1650 {
1651     MachineClass *mc = MACHINE_CLASS(oc);
1652     PCMachineClass *pcmc = PC_MACHINE_CLASS(oc);
1653     HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(oc);
1654 
1655     pcmc->pci_enabled = true;
1656     pcmc->has_acpi_build = true;
1657     pcmc->rsdp_in_ram = true;
1658     pcmc->smbios_defaults = true;
1659     pcmc->smbios_uuid_encoded = true;
1660     pcmc->gigabyte_align = true;
1661     pcmc->has_reserved_memory = true;
1662     pcmc->kvmclock_enabled = true;
1663     pcmc->enforce_aligned_dimm = true;
1664     /* BIOS ACPI tables: 128K. Other BIOS datastructures: less than 4K reported
1665      * to be used at the moment, 32K should be enough for a while.  */
1666     pcmc->acpi_data_size = 0x20000 + 0x8000;
1667     pcmc->linuxboot_dma_enabled = true;
1668     pcmc->pvh_enabled = true;
1669     pcmc->kvmclock_create_always = true;
1670     assert(!mc->get_hotplug_handler);
1671     mc->get_hotplug_handler = pc_get_hotplug_handler;
1672     mc->hotplug_allowed = pc_hotplug_allowed;
1673     mc->cpu_index_to_instance_props = x86_cpu_index_to_props;
1674     mc->get_default_cpu_node_id = x86_get_default_cpu_node_id;
1675     mc->possible_cpu_arch_ids = x86_possible_cpu_arch_ids;
1676     mc->auto_enable_numa_with_memhp = true;
1677     mc->auto_enable_numa_with_memdev = true;
1678     mc->has_hotpluggable_cpus = true;
1679     mc->default_boot_order = "cad";
1680     mc->block_default_type = IF_IDE;
1681     mc->max_cpus = 255;
1682     mc->reset = pc_machine_reset;
1683     mc->wakeup = pc_machine_wakeup;
1684     hc->pre_plug = pc_machine_device_pre_plug_cb;
1685     hc->plug = pc_machine_device_plug_cb;
1686     hc->unplug_request = pc_machine_device_unplug_request_cb;
1687     hc->unplug = pc_machine_device_unplug_cb;
1688     mc->default_cpu_type = TARGET_DEFAULT_CPU_TYPE;
1689     mc->nvdimm_supported = true;
1690     mc->smp_props.dies_supported = true;
1691     mc->default_ram_id = "pc.ram";
1692 
1693     object_class_property_add(oc, PC_MACHINE_MAX_RAM_BELOW_4G, "size",
1694         pc_machine_get_max_ram_below_4g, pc_machine_set_max_ram_below_4g,
1695         NULL, NULL);
1696     object_class_property_set_description(oc, PC_MACHINE_MAX_RAM_BELOW_4G,
1697         "Maximum ram below the 4G boundary (32bit boundary)");
1698 
1699     object_class_property_add(oc, PC_MACHINE_DEVMEM_REGION_SIZE, "int",
1700         pc_machine_get_device_memory_region_size, NULL,
1701         NULL, NULL);
1702 
1703     object_class_property_add(oc, PC_MACHINE_VMPORT, "OnOffAuto",
1704         pc_machine_get_vmport, pc_machine_set_vmport,
1705         NULL, NULL);
1706     object_class_property_set_description(oc, PC_MACHINE_VMPORT,
1707         "Enable vmport (pc & q35)");
1708 
1709     object_class_property_add_bool(oc, PC_MACHINE_SMBUS,
1710         pc_machine_get_smbus, pc_machine_set_smbus);
1711 
1712     object_class_property_add_bool(oc, PC_MACHINE_SATA,
1713         pc_machine_get_sata, pc_machine_set_sata);
1714 
1715     object_class_property_add_bool(oc, PC_MACHINE_PIT,
1716         pc_machine_get_pit, pc_machine_set_pit);
1717 
1718     object_class_property_add_bool(oc, "hpet",
1719         pc_machine_get_hpet, pc_machine_set_hpet);
1720 
1721     object_class_property_add_bool(oc, "default_bus_bypass_iommu",
1722         pc_machine_get_default_bus_bypass_iommu,
1723         pc_machine_set_default_bus_bypass_iommu);
1724 
1725     object_class_property_add(oc, PC_MACHINE_MAX_FW_SIZE, "size",
1726         pc_machine_get_max_fw_size, pc_machine_set_max_fw_size,
1727         NULL, NULL);
1728     object_class_property_set_description(oc, PC_MACHINE_MAX_FW_SIZE,
1729         "Maximum combined firmware size");
1730 }
1731 
1732 static const TypeInfo pc_machine_info = {
1733     .name = TYPE_PC_MACHINE,
1734     .parent = TYPE_X86_MACHINE,
1735     .abstract = true,
1736     .instance_size = sizeof(PCMachineState),
1737     .instance_init = pc_machine_initfn,
1738     .class_size = sizeof(PCMachineClass),
1739     .class_init = pc_machine_class_init,
1740     .interfaces = (InterfaceInfo[]) {
1741          { TYPE_HOTPLUG_HANDLER },
1742          { }
1743     },
1744 };
1745 
1746 static void pc_machine_register_types(void)
1747 {
1748     type_register_static(&pc_machine_info);
1749 }
1750 
1751 type_init(pc_machine_register_types)
1752