1 /* 2 * QEMU PC System Emulator 3 * 4 * Copyright (c) 2003-2004 Fabrice Bellard 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a copy 7 * of this software and associated documentation files (the "Software"), to deal 8 * in the Software without restriction, including without limitation the rights 9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 * copies of the Software, and to permit persons to whom the Software is 11 * furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice shall be included in 14 * all copies or substantial portions of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 22 * THE SOFTWARE. 23 */ 24 #include "qemu/osdep.h" 25 #include "hw/hw.h" 26 #include "hw/i386/pc.h" 27 #include "hw/char/serial.h" 28 #include "hw/i386/apic.h" 29 #include "hw/i386/topology.h" 30 #include "sysemu/cpus.h" 31 #include "hw/block/fdc.h" 32 #include "hw/ide.h" 33 #include "hw/pci/pci.h" 34 #include "hw/pci/pci_bus.h" 35 #include "hw/nvram/fw_cfg.h" 36 #include "hw/timer/hpet.h" 37 #include "hw/smbios/smbios.h" 38 #include "hw/loader.h" 39 #include "elf.h" 40 #include "multiboot.h" 41 #include "hw/timer/mc146818rtc.h" 42 #include "hw/timer/i8254.h" 43 #include "hw/audio/pcspk.h" 44 #include "hw/pci/msi.h" 45 #include "hw/sysbus.h" 46 #include "sysemu/sysemu.h" 47 #include "sysemu/numa.h" 48 #include "sysemu/kvm.h" 49 #include "sysemu/qtest.h" 50 #include "kvm_i386.h" 51 #include "hw/xen/xen.h" 52 #include "sysemu/block-backend.h" 53 #include "hw/block/block.h" 54 #include "ui/qemu-spice.h" 55 #include "exec/memory.h" 56 #include "exec/address-spaces.h" 57 #include "sysemu/arch_init.h" 58 #include "qemu/bitmap.h" 59 #include "qemu/config-file.h" 60 #include "qemu/error-report.h" 61 #include "hw/acpi/acpi.h" 62 #include "hw/acpi/cpu_hotplug.h" 63 #include "hw/boards.h" 64 #include "hw/pci/pci_host.h" 65 #include "acpi-build.h" 66 #include "hw/mem/pc-dimm.h" 67 #include "qapi/visitor.h" 68 #include "qapi-visit.h" 69 #include "qom/cpu.h" 70 #include "hw/nmi.h" 71 #include "hw/i386/intel_iommu.h" 72 73 /* debug PC/ISA interrupts */ 74 //#define DEBUG_IRQ 75 76 #ifdef DEBUG_IRQ 77 #define DPRINTF(fmt, ...) \ 78 do { printf("CPUIRQ: " fmt , ## __VA_ARGS__); } while (0) 79 #else 80 #define DPRINTF(fmt, ...) 81 #endif 82 83 #define FW_CFG_ACPI_TABLES (FW_CFG_ARCH_LOCAL + 0) 84 #define FW_CFG_SMBIOS_ENTRIES (FW_CFG_ARCH_LOCAL + 1) 85 #define FW_CFG_IRQ0_OVERRIDE (FW_CFG_ARCH_LOCAL + 2) 86 #define FW_CFG_E820_TABLE (FW_CFG_ARCH_LOCAL + 3) 87 #define FW_CFG_HPET (FW_CFG_ARCH_LOCAL + 4) 88 89 #define E820_NR_ENTRIES 16 90 91 struct e820_entry { 92 uint64_t address; 93 uint64_t length; 94 uint32_t type; 95 } QEMU_PACKED __attribute((__aligned__(4))); 96 97 struct e820_table { 98 uint32_t count; 99 struct e820_entry entry[E820_NR_ENTRIES]; 100 } QEMU_PACKED __attribute((__aligned__(4))); 101 102 static struct e820_table e820_reserve; 103 static struct e820_entry *e820_table; 104 static unsigned e820_entries; 105 struct hpet_fw_config hpet_cfg = {.count = UINT8_MAX}; 106 107 void gsi_handler(void *opaque, int n, int level) 108 { 109 GSIState *s = opaque; 110 111 DPRINTF("pc: %s GSI %d\n", level ? "raising" : "lowering", n); 112 if (n < ISA_NUM_IRQS) { 113 qemu_set_irq(s->i8259_irq[n], level); 114 } 115 qemu_set_irq(s->ioapic_irq[n], level); 116 } 117 118 static void ioport80_write(void *opaque, hwaddr addr, uint64_t data, 119 unsigned size) 120 { 121 } 122 123 static uint64_t ioport80_read(void *opaque, hwaddr addr, unsigned size) 124 { 125 return 0xffffffffffffffffULL; 126 } 127 128 /* MSDOS compatibility mode FPU exception support */ 129 static qemu_irq ferr_irq; 130 131 void pc_register_ferr_irq(qemu_irq irq) 132 { 133 ferr_irq = irq; 134 } 135 136 /* XXX: add IGNNE support */ 137 void cpu_set_ferr(CPUX86State *s) 138 { 139 qemu_irq_raise(ferr_irq); 140 } 141 142 static void ioportF0_write(void *opaque, hwaddr addr, uint64_t data, 143 unsigned size) 144 { 145 qemu_irq_lower(ferr_irq); 146 } 147 148 static uint64_t ioportF0_read(void *opaque, hwaddr addr, unsigned size) 149 { 150 return 0xffffffffffffffffULL; 151 } 152 153 /* TSC handling */ 154 uint64_t cpu_get_tsc(CPUX86State *env) 155 { 156 return cpu_get_ticks(); 157 } 158 159 /* IRQ handling */ 160 int cpu_get_pic_interrupt(CPUX86State *env) 161 { 162 X86CPU *cpu = x86_env_get_cpu(env); 163 int intno; 164 165 if (!kvm_irqchip_in_kernel()) { 166 intno = apic_get_interrupt(cpu->apic_state); 167 if (intno >= 0) { 168 return intno; 169 } 170 /* read the irq from the PIC */ 171 if (!apic_accept_pic_intr(cpu->apic_state)) { 172 return -1; 173 } 174 } 175 176 intno = pic_read_irq(isa_pic); 177 return intno; 178 } 179 180 static void pic_irq_request(void *opaque, int irq, int level) 181 { 182 CPUState *cs = first_cpu; 183 X86CPU *cpu = X86_CPU(cs); 184 185 DPRINTF("pic_irqs: %s irq %d\n", level? "raise" : "lower", irq); 186 if (cpu->apic_state && !kvm_irqchip_in_kernel()) { 187 CPU_FOREACH(cs) { 188 cpu = X86_CPU(cs); 189 if (apic_accept_pic_intr(cpu->apic_state)) { 190 apic_deliver_pic_intr(cpu->apic_state, level); 191 } 192 } 193 } else { 194 if (level) { 195 cpu_interrupt(cs, CPU_INTERRUPT_HARD); 196 } else { 197 cpu_reset_interrupt(cs, CPU_INTERRUPT_HARD); 198 } 199 } 200 } 201 202 /* PC cmos mappings */ 203 204 #define REG_EQUIPMENT_BYTE 0x14 205 206 int cmos_get_fd_drive_type(FloppyDriveType fd0) 207 { 208 int val; 209 210 switch (fd0) { 211 case FLOPPY_DRIVE_TYPE_144: 212 /* 1.44 Mb 3"5 drive */ 213 val = 4; 214 break; 215 case FLOPPY_DRIVE_TYPE_288: 216 /* 2.88 Mb 3"5 drive */ 217 val = 5; 218 break; 219 case FLOPPY_DRIVE_TYPE_120: 220 /* 1.2 Mb 5"5 drive */ 221 val = 2; 222 break; 223 case FLOPPY_DRIVE_TYPE_NONE: 224 default: 225 val = 0; 226 break; 227 } 228 return val; 229 } 230 231 static void cmos_init_hd(ISADevice *s, int type_ofs, int info_ofs, 232 int16_t cylinders, int8_t heads, int8_t sectors) 233 { 234 rtc_set_memory(s, type_ofs, 47); 235 rtc_set_memory(s, info_ofs, cylinders); 236 rtc_set_memory(s, info_ofs + 1, cylinders >> 8); 237 rtc_set_memory(s, info_ofs + 2, heads); 238 rtc_set_memory(s, info_ofs + 3, 0xff); 239 rtc_set_memory(s, info_ofs + 4, 0xff); 240 rtc_set_memory(s, info_ofs + 5, 0xc0 | ((heads > 8) << 3)); 241 rtc_set_memory(s, info_ofs + 6, cylinders); 242 rtc_set_memory(s, info_ofs + 7, cylinders >> 8); 243 rtc_set_memory(s, info_ofs + 8, sectors); 244 } 245 246 /* convert boot_device letter to something recognizable by the bios */ 247 static int boot_device2nibble(char boot_device) 248 { 249 switch(boot_device) { 250 case 'a': 251 case 'b': 252 return 0x01; /* floppy boot */ 253 case 'c': 254 return 0x02; /* hard drive boot */ 255 case 'd': 256 return 0x03; /* CD-ROM boot */ 257 case 'n': 258 return 0x04; /* Network boot */ 259 } 260 return 0; 261 } 262 263 static void set_boot_dev(ISADevice *s, const char *boot_device, Error **errp) 264 { 265 #define PC_MAX_BOOT_DEVICES 3 266 int nbds, bds[3] = { 0, }; 267 int i; 268 269 nbds = strlen(boot_device); 270 if (nbds > PC_MAX_BOOT_DEVICES) { 271 error_setg(errp, "Too many boot devices for PC"); 272 return; 273 } 274 for (i = 0; i < nbds; i++) { 275 bds[i] = boot_device2nibble(boot_device[i]); 276 if (bds[i] == 0) { 277 error_setg(errp, "Invalid boot device for PC: '%c'", 278 boot_device[i]); 279 return; 280 } 281 } 282 rtc_set_memory(s, 0x3d, (bds[1] << 4) | bds[0]); 283 rtc_set_memory(s, 0x38, (bds[2] << 4) | (fd_bootchk ? 0x0 : 0x1)); 284 } 285 286 static void pc_boot_set(void *opaque, const char *boot_device, Error **errp) 287 { 288 set_boot_dev(opaque, boot_device, errp); 289 } 290 291 static void pc_cmos_init_floppy(ISADevice *rtc_state, ISADevice *floppy) 292 { 293 int val, nb, i; 294 FloppyDriveType fd_type[2] = { FLOPPY_DRIVE_TYPE_NONE, 295 FLOPPY_DRIVE_TYPE_NONE }; 296 297 /* floppy type */ 298 if (floppy) { 299 for (i = 0; i < 2; i++) { 300 fd_type[i] = isa_fdc_get_drive_type(floppy, i); 301 } 302 } 303 val = (cmos_get_fd_drive_type(fd_type[0]) << 4) | 304 cmos_get_fd_drive_type(fd_type[1]); 305 rtc_set_memory(rtc_state, 0x10, val); 306 307 val = rtc_get_memory(rtc_state, REG_EQUIPMENT_BYTE); 308 nb = 0; 309 if (fd_type[0] != FLOPPY_DRIVE_TYPE_NONE) { 310 nb++; 311 } 312 if (fd_type[1] != FLOPPY_DRIVE_TYPE_NONE) { 313 nb++; 314 } 315 switch (nb) { 316 case 0: 317 break; 318 case 1: 319 val |= 0x01; /* 1 drive, ready for boot */ 320 break; 321 case 2: 322 val |= 0x41; /* 2 drives, ready for boot */ 323 break; 324 } 325 rtc_set_memory(rtc_state, REG_EQUIPMENT_BYTE, val); 326 } 327 328 typedef struct pc_cmos_init_late_arg { 329 ISADevice *rtc_state; 330 BusState *idebus[2]; 331 } pc_cmos_init_late_arg; 332 333 typedef struct check_fdc_state { 334 ISADevice *floppy; 335 bool multiple; 336 } CheckFdcState; 337 338 static int check_fdc(Object *obj, void *opaque) 339 { 340 CheckFdcState *state = opaque; 341 Object *fdc; 342 uint32_t iobase; 343 Error *local_err = NULL; 344 345 fdc = object_dynamic_cast(obj, TYPE_ISA_FDC); 346 if (!fdc) { 347 return 0; 348 } 349 350 iobase = object_property_get_uint(obj, "iobase", &local_err); 351 if (local_err || iobase != 0x3f0) { 352 error_free(local_err); 353 return 0; 354 } 355 356 if (state->floppy) { 357 state->multiple = true; 358 } else { 359 state->floppy = ISA_DEVICE(obj); 360 } 361 return 0; 362 } 363 364 static const char * const fdc_container_path[] = { 365 "/unattached", "/peripheral", "/peripheral-anon" 366 }; 367 368 /* 369 * Locate the FDC at IO address 0x3f0, in order to configure the CMOS registers 370 * and ACPI objects. 371 */ 372 ISADevice *pc_find_fdc0(void) 373 { 374 int i; 375 Object *container; 376 CheckFdcState state = { 0 }; 377 378 for (i = 0; i < ARRAY_SIZE(fdc_container_path); i++) { 379 container = container_get(qdev_get_machine(), fdc_container_path[i]); 380 object_child_foreach(container, check_fdc, &state); 381 } 382 383 if (state.multiple) { 384 warn_report("multiple floppy disk controllers with " 385 "iobase=0x3f0 have been found"); 386 error_printf("the one being picked for CMOS setup might not reflect " 387 "your intent\n"); 388 } 389 390 return state.floppy; 391 } 392 393 static void pc_cmos_init_late(void *opaque) 394 { 395 pc_cmos_init_late_arg *arg = opaque; 396 ISADevice *s = arg->rtc_state; 397 int16_t cylinders; 398 int8_t heads, sectors; 399 int val; 400 int i, trans; 401 402 val = 0; 403 if (arg->idebus[0] && ide_get_geometry(arg->idebus[0], 0, 404 &cylinders, &heads, §ors) >= 0) { 405 cmos_init_hd(s, 0x19, 0x1b, cylinders, heads, sectors); 406 val |= 0xf0; 407 } 408 if (arg->idebus[0] && ide_get_geometry(arg->idebus[0], 1, 409 &cylinders, &heads, §ors) >= 0) { 410 cmos_init_hd(s, 0x1a, 0x24, cylinders, heads, sectors); 411 val |= 0x0f; 412 } 413 rtc_set_memory(s, 0x12, val); 414 415 val = 0; 416 for (i = 0; i < 4; i++) { 417 /* NOTE: ide_get_geometry() returns the physical 418 geometry. It is always such that: 1 <= sects <= 63, 1 419 <= heads <= 16, 1 <= cylinders <= 16383. The BIOS 420 geometry can be different if a translation is done. */ 421 if (arg->idebus[i / 2] && 422 ide_get_geometry(arg->idebus[i / 2], i % 2, 423 &cylinders, &heads, §ors) >= 0) { 424 trans = ide_get_bios_chs_trans(arg->idebus[i / 2], i % 2) - 1; 425 assert((trans & ~3) == 0); 426 val |= trans << (i * 2); 427 } 428 } 429 rtc_set_memory(s, 0x39, val); 430 431 pc_cmos_init_floppy(s, pc_find_fdc0()); 432 433 qemu_unregister_reset(pc_cmos_init_late, opaque); 434 } 435 436 void pc_cmos_init(PCMachineState *pcms, 437 BusState *idebus0, BusState *idebus1, 438 ISADevice *s) 439 { 440 int val; 441 static pc_cmos_init_late_arg arg; 442 443 /* various important CMOS locations needed by PC/Bochs bios */ 444 445 /* memory size */ 446 /* base memory (first MiB) */ 447 val = MIN(pcms->below_4g_mem_size / 1024, 640); 448 rtc_set_memory(s, 0x15, val); 449 rtc_set_memory(s, 0x16, val >> 8); 450 /* extended memory (next 64MiB) */ 451 if (pcms->below_4g_mem_size > 1024 * 1024) { 452 val = (pcms->below_4g_mem_size - 1024 * 1024) / 1024; 453 } else { 454 val = 0; 455 } 456 if (val > 65535) 457 val = 65535; 458 rtc_set_memory(s, 0x17, val); 459 rtc_set_memory(s, 0x18, val >> 8); 460 rtc_set_memory(s, 0x30, val); 461 rtc_set_memory(s, 0x31, val >> 8); 462 /* memory between 16MiB and 4GiB */ 463 if (pcms->below_4g_mem_size > 16 * 1024 * 1024) { 464 val = (pcms->below_4g_mem_size - 16 * 1024 * 1024) / 65536; 465 } else { 466 val = 0; 467 } 468 if (val > 65535) 469 val = 65535; 470 rtc_set_memory(s, 0x34, val); 471 rtc_set_memory(s, 0x35, val >> 8); 472 /* memory above 4GiB */ 473 val = pcms->above_4g_mem_size / 65536; 474 rtc_set_memory(s, 0x5b, val); 475 rtc_set_memory(s, 0x5c, val >> 8); 476 rtc_set_memory(s, 0x5d, val >> 16); 477 478 object_property_add_link(OBJECT(pcms), "rtc_state", 479 TYPE_ISA_DEVICE, 480 (Object **)&pcms->rtc, 481 object_property_allow_set_link, 482 OBJ_PROP_LINK_UNREF_ON_RELEASE, &error_abort); 483 object_property_set_link(OBJECT(pcms), OBJECT(s), 484 "rtc_state", &error_abort); 485 486 set_boot_dev(s, MACHINE(pcms)->boot_order, &error_fatal); 487 488 val = 0; 489 val |= 0x02; /* FPU is there */ 490 val |= 0x04; /* PS/2 mouse installed */ 491 rtc_set_memory(s, REG_EQUIPMENT_BYTE, val); 492 493 /* hard drives and FDC */ 494 arg.rtc_state = s; 495 arg.idebus[0] = idebus0; 496 arg.idebus[1] = idebus1; 497 qemu_register_reset(pc_cmos_init_late, &arg); 498 } 499 500 #define TYPE_PORT92 "port92" 501 #define PORT92(obj) OBJECT_CHECK(Port92State, (obj), TYPE_PORT92) 502 503 /* port 92 stuff: could be split off */ 504 typedef struct Port92State { 505 ISADevice parent_obj; 506 507 MemoryRegion io; 508 uint8_t outport; 509 qemu_irq a20_out; 510 } Port92State; 511 512 static void port92_write(void *opaque, hwaddr addr, uint64_t val, 513 unsigned size) 514 { 515 Port92State *s = opaque; 516 int oldval = s->outport; 517 518 DPRINTF("port92: write 0x%02" PRIx64 "\n", val); 519 s->outport = val; 520 qemu_set_irq(s->a20_out, (val >> 1) & 1); 521 if ((val & 1) && !(oldval & 1)) { 522 qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); 523 } 524 } 525 526 static uint64_t port92_read(void *opaque, hwaddr addr, 527 unsigned size) 528 { 529 Port92State *s = opaque; 530 uint32_t ret; 531 532 ret = s->outport; 533 DPRINTF("port92: read 0x%02x\n", ret); 534 return ret; 535 } 536 537 static void port92_init(ISADevice *dev, qemu_irq a20_out) 538 { 539 qdev_connect_gpio_out_named(DEVICE(dev), PORT92_A20_LINE, 0, a20_out); 540 } 541 542 static const VMStateDescription vmstate_port92_isa = { 543 .name = "port92", 544 .version_id = 1, 545 .minimum_version_id = 1, 546 .fields = (VMStateField[]) { 547 VMSTATE_UINT8(outport, Port92State), 548 VMSTATE_END_OF_LIST() 549 } 550 }; 551 552 static void port92_reset(DeviceState *d) 553 { 554 Port92State *s = PORT92(d); 555 556 s->outport &= ~1; 557 } 558 559 static const MemoryRegionOps port92_ops = { 560 .read = port92_read, 561 .write = port92_write, 562 .impl = { 563 .min_access_size = 1, 564 .max_access_size = 1, 565 }, 566 .endianness = DEVICE_LITTLE_ENDIAN, 567 }; 568 569 static void port92_initfn(Object *obj) 570 { 571 Port92State *s = PORT92(obj); 572 573 memory_region_init_io(&s->io, OBJECT(s), &port92_ops, s, "port92", 1); 574 575 s->outport = 0; 576 577 qdev_init_gpio_out_named(DEVICE(obj), &s->a20_out, PORT92_A20_LINE, 1); 578 } 579 580 static void port92_realizefn(DeviceState *dev, Error **errp) 581 { 582 ISADevice *isadev = ISA_DEVICE(dev); 583 Port92State *s = PORT92(dev); 584 585 isa_register_ioport(isadev, &s->io, 0x92); 586 } 587 588 static void port92_class_initfn(ObjectClass *klass, void *data) 589 { 590 DeviceClass *dc = DEVICE_CLASS(klass); 591 592 dc->realize = port92_realizefn; 593 dc->reset = port92_reset; 594 dc->vmsd = &vmstate_port92_isa; 595 /* 596 * Reason: unlike ordinary ISA devices, this one needs additional 597 * wiring: its A20 output line needs to be wired up by 598 * port92_init(). 599 */ 600 dc->user_creatable = false; 601 } 602 603 static const TypeInfo port92_info = { 604 .name = TYPE_PORT92, 605 .parent = TYPE_ISA_DEVICE, 606 .instance_size = sizeof(Port92State), 607 .instance_init = port92_initfn, 608 .class_init = port92_class_initfn, 609 }; 610 611 static void port92_register_types(void) 612 { 613 type_register_static(&port92_info); 614 } 615 616 type_init(port92_register_types) 617 618 static void handle_a20_line_change(void *opaque, int irq, int level) 619 { 620 X86CPU *cpu = opaque; 621 622 /* XXX: send to all CPUs ? */ 623 /* XXX: add logic to handle multiple A20 line sources */ 624 x86_cpu_set_a20(cpu, level); 625 } 626 627 int e820_add_entry(uint64_t address, uint64_t length, uint32_t type) 628 { 629 int index = le32_to_cpu(e820_reserve.count); 630 struct e820_entry *entry; 631 632 if (type != E820_RAM) { 633 /* old FW_CFG_E820_TABLE entry -- reservations only */ 634 if (index >= E820_NR_ENTRIES) { 635 return -EBUSY; 636 } 637 entry = &e820_reserve.entry[index++]; 638 639 entry->address = cpu_to_le64(address); 640 entry->length = cpu_to_le64(length); 641 entry->type = cpu_to_le32(type); 642 643 e820_reserve.count = cpu_to_le32(index); 644 } 645 646 /* new "etc/e820" file -- include ram too */ 647 e820_table = g_renew(struct e820_entry, e820_table, e820_entries + 1); 648 e820_table[e820_entries].address = cpu_to_le64(address); 649 e820_table[e820_entries].length = cpu_to_le64(length); 650 e820_table[e820_entries].type = cpu_to_le32(type); 651 e820_entries++; 652 653 return e820_entries; 654 } 655 656 int e820_get_num_entries(void) 657 { 658 return e820_entries; 659 } 660 661 bool e820_get_entry(int idx, uint32_t type, uint64_t *address, uint64_t *length) 662 { 663 if (idx < e820_entries && e820_table[idx].type == cpu_to_le32(type)) { 664 *address = le64_to_cpu(e820_table[idx].address); 665 *length = le64_to_cpu(e820_table[idx].length); 666 return true; 667 } 668 return false; 669 } 670 671 /* Enables contiguous-apic-ID mode, for compatibility */ 672 static bool compat_apic_id_mode; 673 674 void enable_compat_apic_id_mode(void) 675 { 676 compat_apic_id_mode = true; 677 } 678 679 /* Calculates initial APIC ID for a specific CPU index 680 * 681 * Currently we need to be able to calculate the APIC ID from the CPU index 682 * alone (without requiring a CPU object), as the QEMU<->Seabios interfaces have 683 * no concept of "CPU index", and the NUMA tables on fw_cfg need the APIC ID of 684 * all CPUs up to max_cpus. 685 */ 686 static uint32_t x86_cpu_apic_id_from_index(unsigned int cpu_index) 687 { 688 uint32_t correct_id; 689 static bool warned; 690 691 correct_id = x86_apicid_from_cpu_idx(smp_cores, smp_threads, cpu_index); 692 if (compat_apic_id_mode) { 693 if (cpu_index != correct_id && !warned && !qtest_enabled()) { 694 error_report("APIC IDs set in compatibility mode, " 695 "CPU topology won't match the configuration"); 696 warned = true; 697 } 698 return cpu_index; 699 } else { 700 return correct_id; 701 } 702 } 703 704 static void pc_build_smbios(PCMachineState *pcms) 705 { 706 uint8_t *smbios_tables, *smbios_anchor; 707 size_t smbios_tables_len, smbios_anchor_len; 708 struct smbios_phys_mem_area *mem_array; 709 unsigned i, array_count; 710 MachineState *ms = MACHINE(pcms); 711 X86CPU *cpu = X86_CPU(ms->possible_cpus->cpus[0].cpu); 712 713 /* tell smbios about cpuid version and features */ 714 smbios_set_cpuid(cpu->env.cpuid_version, cpu->env.features[FEAT_1_EDX]); 715 716 smbios_tables = smbios_get_table_legacy(&smbios_tables_len); 717 if (smbios_tables) { 718 fw_cfg_add_bytes(pcms->fw_cfg, FW_CFG_SMBIOS_ENTRIES, 719 smbios_tables, smbios_tables_len); 720 } 721 722 /* build the array of physical mem area from e820 table */ 723 mem_array = g_malloc0(sizeof(*mem_array) * e820_get_num_entries()); 724 for (i = 0, array_count = 0; i < e820_get_num_entries(); i++) { 725 uint64_t addr, len; 726 727 if (e820_get_entry(i, E820_RAM, &addr, &len)) { 728 mem_array[array_count].address = addr; 729 mem_array[array_count].length = len; 730 array_count++; 731 } 732 } 733 smbios_get_tables(mem_array, array_count, 734 &smbios_tables, &smbios_tables_len, 735 &smbios_anchor, &smbios_anchor_len); 736 g_free(mem_array); 737 738 if (smbios_anchor) { 739 fw_cfg_add_file(pcms->fw_cfg, "etc/smbios/smbios-tables", 740 smbios_tables, smbios_tables_len); 741 fw_cfg_add_file(pcms->fw_cfg, "etc/smbios/smbios-anchor", 742 smbios_anchor, smbios_anchor_len); 743 } 744 } 745 746 static FWCfgState *bochs_bios_init(AddressSpace *as, PCMachineState *pcms) 747 { 748 FWCfgState *fw_cfg; 749 uint64_t *numa_fw_cfg; 750 int i; 751 const CPUArchIdList *cpus; 752 MachineClass *mc = MACHINE_GET_CLASS(pcms); 753 754 fw_cfg = fw_cfg_init_io_dma(FW_CFG_IO_BASE, FW_CFG_IO_BASE + 4, as); 755 fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, pcms->boot_cpus); 756 757 /* FW_CFG_MAX_CPUS is a bit confusing/problematic on x86: 758 * 759 * For machine types prior to 1.8, SeaBIOS needs FW_CFG_MAX_CPUS for 760 * building MPTable, ACPI MADT, ACPI CPU hotplug and ACPI SRAT table, 761 * that tables are based on xAPIC ID and QEMU<->SeaBIOS interface 762 * for CPU hotplug also uses APIC ID and not "CPU index". 763 * This means that FW_CFG_MAX_CPUS is not the "maximum number of CPUs", 764 * but the "limit to the APIC ID values SeaBIOS may see". 765 * 766 * So for compatibility reasons with old BIOSes we are stuck with 767 * "etc/max-cpus" actually being apic_id_limit 768 */ 769 fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)pcms->apic_id_limit); 770 fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size); 771 fw_cfg_add_bytes(fw_cfg, FW_CFG_ACPI_TABLES, 772 acpi_tables, acpi_tables_len); 773 fw_cfg_add_i32(fw_cfg, FW_CFG_IRQ0_OVERRIDE, kvm_allows_irq0_override()); 774 775 fw_cfg_add_bytes(fw_cfg, FW_CFG_E820_TABLE, 776 &e820_reserve, sizeof(e820_reserve)); 777 fw_cfg_add_file(fw_cfg, "etc/e820", e820_table, 778 sizeof(struct e820_entry) * e820_entries); 779 780 fw_cfg_add_bytes(fw_cfg, FW_CFG_HPET, &hpet_cfg, sizeof(hpet_cfg)); 781 /* allocate memory for the NUMA channel: one (64bit) word for the number 782 * of nodes, one word for each VCPU->node and one word for each node to 783 * hold the amount of memory. 784 */ 785 numa_fw_cfg = g_new0(uint64_t, 1 + pcms->apic_id_limit + nb_numa_nodes); 786 numa_fw_cfg[0] = cpu_to_le64(nb_numa_nodes); 787 cpus = mc->possible_cpu_arch_ids(MACHINE(pcms)); 788 for (i = 0; i < cpus->len; i++) { 789 unsigned int apic_id = cpus->cpus[i].arch_id; 790 assert(apic_id < pcms->apic_id_limit); 791 numa_fw_cfg[apic_id + 1] = cpu_to_le64(cpus->cpus[i].props.node_id); 792 } 793 for (i = 0; i < nb_numa_nodes; i++) { 794 numa_fw_cfg[pcms->apic_id_limit + 1 + i] = 795 cpu_to_le64(numa_info[i].node_mem); 796 } 797 fw_cfg_add_bytes(fw_cfg, FW_CFG_NUMA, numa_fw_cfg, 798 (1 + pcms->apic_id_limit + nb_numa_nodes) * 799 sizeof(*numa_fw_cfg)); 800 801 return fw_cfg; 802 } 803 804 static long get_file_size(FILE *f) 805 { 806 long where, size; 807 808 /* XXX: on Unix systems, using fstat() probably makes more sense */ 809 810 where = ftell(f); 811 fseek(f, 0, SEEK_END); 812 size = ftell(f); 813 fseek(f, where, SEEK_SET); 814 815 return size; 816 } 817 818 /* setup_data types */ 819 #define SETUP_NONE 0 820 #define SETUP_E820_EXT 1 821 #define SETUP_DTB 2 822 #define SETUP_PCI 3 823 #define SETUP_EFI 4 824 825 struct setup_data { 826 uint64_t next; 827 uint32_t type; 828 uint32_t len; 829 uint8_t data[0]; 830 } __attribute__((packed)); 831 832 static void load_linux(PCMachineState *pcms, 833 FWCfgState *fw_cfg) 834 { 835 uint16_t protocol; 836 int setup_size, kernel_size, initrd_size = 0, cmdline_size; 837 int dtb_size, setup_data_offset; 838 uint32_t initrd_max; 839 uint8_t header[8192], *setup, *kernel, *initrd_data; 840 hwaddr real_addr, prot_addr, cmdline_addr, initrd_addr = 0; 841 FILE *f; 842 char *vmode; 843 MachineState *machine = MACHINE(pcms); 844 PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); 845 struct setup_data *setup_data; 846 const char *kernel_filename = machine->kernel_filename; 847 const char *initrd_filename = machine->initrd_filename; 848 const char *dtb_filename = machine->dtb; 849 const char *kernel_cmdline = machine->kernel_cmdline; 850 851 /* Align to 16 bytes as a paranoia measure */ 852 cmdline_size = (strlen(kernel_cmdline)+16) & ~15; 853 854 /* load the kernel header */ 855 f = fopen(kernel_filename, "rb"); 856 if (!f || !(kernel_size = get_file_size(f)) || 857 fread(header, 1, MIN(ARRAY_SIZE(header), kernel_size), f) != 858 MIN(ARRAY_SIZE(header), kernel_size)) { 859 fprintf(stderr, "qemu: could not load kernel '%s': %s\n", 860 kernel_filename, strerror(errno)); 861 exit(1); 862 } 863 864 /* kernel protocol version */ 865 #if 0 866 fprintf(stderr, "header magic: %#x\n", ldl_p(header+0x202)); 867 #endif 868 if (ldl_p(header+0x202) == 0x53726448) { 869 protocol = lduw_p(header+0x206); 870 } else { 871 /* This looks like a multiboot kernel. If it is, let's stop 872 treating it like a Linux kernel. */ 873 if (load_multiboot(fw_cfg, f, kernel_filename, initrd_filename, 874 kernel_cmdline, kernel_size, header)) { 875 return; 876 } 877 protocol = 0; 878 } 879 880 if (protocol < 0x200 || !(header[0x211] & 0x01)) { 881 /* Low kernel */ 882 real_addr = 0x90000; 883 cmdline_addr = 0x9a000 - cmdline_size; 884 prot_addr = 0x10000; 885 } else if (protocol < 0x202) { 886 /* High but ancient kernel */ 887 real_addr = 0x90000; 888 cmdline_addr = 0x9a000 - cmdline_size; 889 prot_addr = 0x100000; 890 } else { 891 /* High and recent kernel */ 892 real_addr = 0x10000; 893 cmdline_addr = 0x20000; 894 prot_addr = 0x100000; 895 } 896 897 #if 0 898 fprintf(stderr, 899 "qemu: real_addr = 0x" TARGET_FMT_plx "\n" 900 "qemu: cmdline_addr = 0x" TARGET_FMT_plx "\n" 901 "qemu: prot_addr = 0x" TARGET_FMT_plx "\n", 902 real_addr, 903 cmdline_addr, 904 prot_addr); 905 #endif 906 907 /* highest address for loading the initrd */ 908 if (protocol >= 0x203) { 909 initrd_max = ldl_p(header+0x22c); 910 } else { 911 initrd_max = 0x37ffffff; 912 } 913 914 if (initrd_max >= pcms->below_4g_mem_size - pcmc->acpi_data_size) { 915 initrd_max = pcms->below_4g_mem_size - pcmc->acpi_data_size - 1; 916 } 917 918 fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_ADDR, cmdline_addr); 919 fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE, strlen(kernel_cmdline)+1); 920 fw_cfg_add_string(fw_cfg, FW_CFG_CMDLINE_DATA, kernel_cmdline); 921 922 if (protocol >= 0x202) { 923 stl_p(header+0x228, cmdline_addr); 924 } else { 925 stw_p(header+0x20, 0xA33F); 926 stw_p(header+0x22, cmdline_addr-real_addr); 927 } 928 929 /* handle vga= parameter */ 930 vmode = strstr(kernel_cmdline, "vga="); 931 if (vmode) { 932 unsigned int video_mode; 933 /* skip "vga=" */ 934 vmode += 4; 935 if (!strncmp(vmode, "normal", 6)) { 936 video_mode = 0xffff; 937 } else if (!strncmp(vmode, "ext", 3)) { 938 video_mode = 0xfffe; 939 } else if (!strncmp(vmode, "ask", 3)) { 940 video_mode = 0xfffd; 941 } else { 942 video_mode = strtol(vmode, NULL, 0); 943 } 944 stw_p(header+0x1fa, video_mode); 945 } 946 947 /* loader type */ 948 /* High nybble = B reserved for QEMU; low nybble is revision number. 949 If this code is substantially changed, you may want to consider 950 incrementing the revision. */ 951 if (protocol >= 0x200) { 952 header[0x210] = 0xB0; 953 } 954 /* heap */ 955 if (protocol >= 0x201) { 956 header[0x211] |= 0x80; /* CAN_USE_HEAP */ 957 stw_p(header+0x224, cmdline_addr-real_addr-0x200); 958 } 959 960 /* load initrd */ 961 if (initrd_filename) { 962 if (protocol < 0x200) { 963 fprintf(stderr, "qemu: linux kernel too old to load a ram disk\n"); 964 exit(1); 965 } 966 967 initrd_size = get_image_size(initrd_filename); 968 if (initrd_size < 0) { 969 fprintf(stderr, "qemu: error reading initrd %s: %s\n", 970 initrd_filename, strerror(errno)); 971 exit(1); 972 } 973 974 initrd_addr = (initrd_max-initrd_size) & ~4095; 975 976 initrd_data = g_malloc(initrd_size); 977 load_image(initrd_filename, initrd_data); 978 979 fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_ADDR, initrd_addr); 980 fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_SIZE, initrd_size); 981 fw_cfg_add_bytes(fw_cfg, FW_CFG_INITRD_DATA, initrd_data, initrd_size); 982 983 stl_p(header+0x218, initrd_addr); 984 stl_p(header+0x21c, initrd_size); 985 } 986 987 /* load kernel and setup */ 988 setup_size = header[0x1f1]; 989 if (setup_size == 0) { 990 setup_size = 4; 991 } 992 setup_size = (setup_size+1)*512; 993 if (setup_size > kernel_size) { 994 fprintf(stderr, "qemu: invalid kernel header\n"); 995 exit(1); 996 } 997 kernel_size -= setup_size; 998 999 setup = g_malloc(setup_size); 1000 kernel = g_malloc(kernel_size); 1001 fseek(f, 0, SEEK_SET); 1002 if (fread(setup, 1, setup_size, f) != setup_size) { 1003 fprintf(stderr, "fread() failed\n"); 1004 exit(1); 1005 } 1006 if (fread(kernel, 1, kernel_size, f) != kernel_size) { 1007 fprintf(stderr, "fread() failed\n"); 1008 exit(1); 1009 } 1010 fclose(f); 1011 1012 /* append dtb to kernel */ 1013 if (dtb_filename) { 1014 if (protocol < 0x209) { 1015 fprintf(stderr, "qemu: Linux kernel too old to load a dtb\n"); 1016 exit(1); 1017 } 1018 1019 dtb_size = get_image_size(dtb_filename); 1020 if (dtb_size <= 0) { 1021 fprintf(stderr, "qemu: error reading dtb %s: %s\n", 1022 dtb_filename, strerror(errno)); 1023 exit(1); 1024 } 1025 1026 setup_data_offset = QEMU_ALIGN_UP(kernel_size, 16); 1027 kernel_size = setup_data_offset + sizeof(struct setup_data) + dtb_size; 1028 kernel = g_realloc(kernel, kernel_size); 1029 1030 stq_p(header+0x250, prot_addr + setup_data_offset); 1031 1032 setup_data = (struct setup_data *)(kernel + setup_data_offset); 1033 setup_data->next = 0; 1034 setup_data->type = cpu_to_le32(SETUP_DTB); 1035 setup_data->len = cpu_to_le32(dtb_size); 1036 1037 load_image_size(dtb_filename, setup_data->data, dtb_size); 1038 } 1039 1040 memcpy(setup, header, MIN(sizeof(header), setup_size)); 1041 1042 fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, prot_addr); 1043 fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size); 1044 fw_cfg_add_bytes(fw_cfg, FW_CFG_KERNEL_DATA, kernel, kernel_size); 1045 1046 fw_cfg_add_i32(fw_cfg, FW_CFG_SETUP_ADDR, real_addr); 1047 fw_cfg_add_i32(fw_cfg, FW_CFG_SETUP_SIZE, setup_size); 1048 fw_cfg_add_bytes(fw_cfg, FW_CFG_SETUP_DATA, setup, setup_size); 1049 1050 option_rom[nb_option_roms].bootindex = 0; 1051 option_rom[nb_option_roms].name = "linuxboot.bin"; 1052 if (pcmc->linuxboot_dma_enabled && fw_cfg_dma_enabled(fw_cfg)) { 1053 option_rom[nb_option_roms].name = "linuxboot_dma.bin"; 1054 } 1055 nb_option_roms++; 1056 } 1057 1058 #define NE2000_NB_MAX 6 1059 1060 static const int ne2000_io[NE2000_NB_MAX] = { 0x300, 0x320, 0x340, 0x360, 1061 0x280, 0x380 }; 1062 static const int ne2000_irq[NE2000_NB_MAX] = { 9, 10, 11, 3, 4, 5 }; 1063 1064 void pc_init_ne2k_isa(ISABus *bus, NICInfo *nd) 1065 { 1066 static int nb_ne2k = 0; 1067 1068 if (nb_ne2k == NE2000_NB_MAX) 1069 return; 1070 isa_ne2000_init(bus, ne2000_io[nb_ne2k], 1071 ne2000_irq[nb_ne2k], nd); 1072 nb_ne2k++; 1073 } 1074 1075 DeviceState *cpu_get_current_apic(void) 1076 { 1077 if (current_cpu) { 1078 X86CPU *cpu = X86_CPU(current_cpu); 1079 return cpu->apic_state; 1080 } else { 1081 return NULL; 1082 } 1083 } 1084 1085 void pc_acpi_smi_interrupt(void *opaque, int irq, int level) 1086 { 1087 X86CPU *cpu = opaque; 1088 1089 if (level) { 1090 cpu_interrupt(CPU(cpu), CPU_INTERRUPT_SMI); 1091 } 1092 } 1093 1094 static void pc_new_cpu(const char *typename, int64_t apic_id, Error **errp) 1095 { 1096 Object *cpu = NULL; 1097 Error *local_err = NULL; 1098 1099 cpu = object_new(typename); 1100 1101 object_property_set_uint(cpu, apic_id, "apic-id", &local_err); 1102 object_property_set_bool(cpu, true, "realized", &local_err); 1103 1104 object_unref(cpu); 1105 error_propagate(errp, local_err); 1106 } 1107 1108 void pc_hot_add_cpu(const int64_t id, Error **errp) 1109 { 1110 ObjectClass *oc; 1111 MachineState *ms = MACHINE(qdev_get_machine()); 1112 int64_t apic_id = x86_cpu_apic_id_from_index(id); 1113 Error *local_err = NULL; 1114 1115 if (id < 0) { 1116 error_setg(errp, "Invalid CPU id: %" PRIi64, id); 1117 return; 1118 } 1119 1120 if (apic_id >= ACPI_CPU_HOTPLUG_ID_LIMIT) { 1121 error_setg(errp, "Unable to add CPU: %" PRIi64 1122 ", resulting APIC ID (%" PRIi64 ") is too large", 1123 id, apic_id); 1124 return; 1125 } 1126 1127 assert(ms->possible_cpus->cpus[0].cpu); /* BSP is always present */ 1128 oc = OBJECT_CLASS(CPU_GET_CLASS(ms->possible_cpus->cpus[0].cpu)); 1129 pc_new_cpu(object_class_get_name(oc), apic_id, &local_err); 1130 if (local_err) { 1131 error_propagate(errp, local_err); 1132 return; 1133 } 1134 } 1135 1136 void pc_cpus_init(PCMachineState *pcms) 1137 { 1138 int i; 1139 CPUClass *cc; 1140 ObjectClass *oc; 1141 const char *typename; 1142 gchar **model_pieces; 1143 const CPUArchIdList *possible_cpus; 1144 MachineState *machine = MACHINE(pcms); 1145 MachineClass *mc = MACHINE_GET_CLASS(pcms); 1146 1147 /* init CPUs */ 1148 if (machine->cpu_model == NULL) { 1149 #ifdef TARGET_X86_64 1150 machine->cpu_model = "qemu64"; 1151 #else 1152 machine->cpu_model = "qemu32"; 1153 #endif 1154 } 1155 1156 model_pieces = g_strsplit(machine->cpu_model, ",", 2); 1157 if (!model_pieces[0]) { 1158 error_report("Invalid/empty CPU model name"); 1159 exit(1); 1160 } 1161 1162 oc = cpu_class_by_name(TYPE_X86_CPU, model_pieces[0]); 1163 if (oc == NULL) { 1164 error_report("Unable to find CPU definition: %s", model_pieces[0]); 1165 exit(1); 1166 } 1167 typename = object_class_get_name(oc); 1168 cc = CPU_CLASS(oc); 1169 cc->parse_features(typename, model_pieces[1], &error_fatal); 1170 g_strfreev(model_pieces); 1171 1172 /* Calculates the limit to CPU APIC ID values 1173 * 1174 * Limit for the APIC ID value, so that all 1175 * CPU APIC IDs are < pcms->apic_id_limit. 1176 * 1177 * This is used for FW_CFG_MAX_CPUS. See comments on bochs_bios_init(). 1178 */ 1179 pcms->apic_id_limit = x86_cpu_apic_id_from_index(max_cpus - 1) + 1; 1180 possible_cpus = mc->possible_cpu_arch_ids(machine); 1181 for (i = 0; i < smp_cpus; i++) { 1182 pc_new_cpu(typename, possible_cpus->cpus[i].arch_id, &error_fatal); 1183 } 1184 } 1185 1186 static void pc_build_feature_control_file(PCMachineState *pcms) 1187 { 1188 MachineState *ms = MACHINE(pcms); 1189 X86CPU *cpu = X86_CPU(ms->possible_cpus->cpus[0].cpu); 1190 CPUX86State *env = &cpu->env; 1191 uint32_t unused, ecx, edx; 1192 uint64_t feature_control_bits = 0; 1193 uint64_t *val; 1194 1195 cpu_x86_cpuid(env, 1, 0, &unused, &unused, &ecx, &edx); 1196 if (ecx & CPUID_EXT_VMX) { 1197 feature_control_bits |= FEATURE_CONTROL_VMXON_ENABLED_OUTSIDE_SMX; 1198 } 1199 1200 if ((edx & (CPUID_EXT2_MCE | CPUID_EXT2_MCA)) == 1201 (CPUID_EXT2_MCE | CPUID_EXT2_MCA) && 1202 (env->mcg_cap & MCG_LMCE_P)) { 1203 feature_control_bits |= FEATURE_CONTROL_LMCE; 1204 } 1205 1206 if (!feature_control_bits) { 1207 return; 1208 } 1209 1210 val = g_malloc(sizeof(*val)); 1211 *val = cpu_to_le64(feature_control_bits | FEATURE_CONTROL_LOCKED); 1212 fw_cfg_add_file(pcms->fw_cfg, "etc/msr_feature_control", val, sizeof(*val)); 1213 } 1214 1215 static void rtc_set_cpus_count(ISADevice *rtc, uint16_t cpus_count) 1216 { 1217 if (cpus_count > 0xff) { 1218 /* If the number of CPUs can't be represented in 8 bits, the 1219 * BIOS must use "FW_CFG_NB_CPUS". Set RTC field to 0 just 1220 * to make old BIOSes fail more predictably. 1221 */ 1222 rtc_set_memory(rtc, 0x5f, 0); 1223 } else { 1224 rtc_set_memory(rtc, 0x5f, cpus_count - 1); 1225 } 1226 } 1227 1228 static 1229 void pc_machine_done(Notifier *notifier, void *data) 1230 { 1231 PCMachineState *pcms = container_of(notifier, 1232 PCMachineState, machine_done); 1233 PCIBus *bus = pcms->bus; 1234 1235 /* set the number of CPUs */ 1236 rtc_set_cpus_count(pcms->rtc, pcms->boot_cpus); 1237 1238 if (bus) { 1239 int extra_hosts = 0; 1240 1241 QLIST_FOREACH(bus, &bus->child, sibling) { 1242 /* look for expander root buses */ 1243 if (pci_bus_is_root(bus)) { 1244 extra_hosts++; 1245 } 1246 } 1247 if (extra_hosts && pcms->fw_cfg) { 1248 uint64_t *val = g_malloc(sizeof(*val)); 1249 *val = cpu_to_le64(extra_hosts); 1250 fw_cfg_add_file(pcms->fw_cfg, 1251 "etc/extra-pci-roots", val, sizeof(*val)); 1252 } 1253 } 1254 1255 acpi_setup(); 1256 if (pcms->fw_cfg) { 1257 pc_build_smbios(pcms); 1258 pc_build_feature_control_file(pcms); 1259 /* update FW_CFG_NB_CPUS to account for -device added CPUs */ 1260 fw_cfg_modify_i16(pcms->fw_cfg, FW_CFG_NB_CPUS, pcms->boot_cpus); 1261 } 1262 1263 if (pcms->apic_id_limit > 255) { 1264 IntelIOMMUState *iommu = INTEL_IOMMU_DEVICE(x86_iommu_get_default()); 1265 1266 if (!iommu || !iommu->x86_iommu.intr_supported || 1267 iommu->intr_eim != ON_OFF_AUTO_ON) { 1268 error_report("current -smp configuration requires " 1269 "Extended Interrupt Mode enabled. " 1270 "You can add an IOMMU using: " 1271 "-device intel-iommu,intremap=on,eim=on"); 1272 exit(EXIT_FAILURE); 1273 } 1274 } 1275 } 1276 1277 void pc_guest_info_init(PCMachineState *pcms) 1278 { 1279 int i; 1280 1281 pcms->apic_xrupt_override = kvm_allows_irq0_override(); 1282 pcms->numa_nodes = nb_numa_nodes; 1283 pcms->node_mem = g_malloc0(pcms->numa_nodes * 1284 sizeof *pcms->node_mem); 1285 for (i = 0; i < nb_numa_nodes; i++) { 1286 pcms->node_mem[i] = numa_info[i].node_mem; 1287 } 1288 1289 pcms->machine_done.notify = pc_machine_done; 1290 qemu_add_machine_init_done_notifier(&pcms->machine_done); 1291 } 1292 1293 /* setup pci memory address space mapping into system address space */ 1294 void pc_pci_as_mapping_init(Object *owner, MemoryRegion *system_memory, 1295 MemoryRegion *pci_address_space) 1296 { 1297 /* Set to lower priority than RAM */ 1298 memory_region_add_subregion_overlap(system_memory, 0x0, 1299 pci_address_space, -1); 1300 } 1301 1302 void pc_acpi_init(const char *default_dsdt) 1303 { 1304 char *filename; 1305 1306 if (acpi_tables != NULL) { 1307 /* manually set via -acpitable, leave it alone */ 1308 return; 1309 } 1310 1311 filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, default_dsdt); 1312 if (filename == NULL) { 1313 fprintf(stderr, "WARNING: failed to find %s\n", default_dsdt); 1314 } else { 1315 QemuOpts *opts = qemu_opts_create(qemu_find_opts("acpi"), NULL, 0, 1316 &error_abort); 1317 Error *err = NULL; 1318 1319 qemu_opt_set(opts, "file", filename, &error_abort); 1320 1321 acpi_table_add_builtin(opts, &err); 1322 if (err) { 1323 warn_reportf_err(err, "failed to load %s: ", filename); 1324 } 1325 g_free(filename); 1326 } 1327 } 1328 1329 void xen_load_linux(PCMachineState *pcms) 1330 { 1331 int i; 1332 FWCfgState *fw_cfg; 1333 1334 assert(MACHINE(pcms)->kernel_filename != NULL); 1335 1336 fw_cfg = fw_cfg_init_io(FW_CFG_IO_BASE); 1337 fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, pcms->boot_cpus); 1338 rom_set_fw(fw_cfg); 1339 1340 load_linux(pcms, fw_cfg); 1341 for (i = 0; i < nb_option_roms; i++) { 1342 assert(!strcmp(option_rom[i].name, "linuxboot.bin") || 1343 !strcmp(option_rom[i].name, "linuxboot_dma.bin") || 1344 !strcmp(option_rom[i].name, "multiboot.bin")); 1345 rom_add_option(option_rom[i].name, option_rom[i].bootindex); 1346 } 1347 pcms->fw_cfg = fw_cfg; 1348 } 1349 1350 void pc_memory_init(PCMachineState *pcms, 1351 MemoryRegion *system_memory, 1352 MemoryRegion *rom_memory, 1353 MemoryRegion **ram_memory) 1354 { 1355 int linux_boot, i; 1356 MemoryRegion *ram, *option_rom_mr; 1357 MemoryRegion *ram_below_4g, *ram_above_4g; 1358 FWCfgState *fw_cfg; 1359 MachineState *machine = MACHINE(pcms); 1360 PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); 1361 1362 assert(machine->ram_size == pcms->below_4g_mem_size + 1363 pcms->above_4g_mem_size); 1364 1365 linux_boot = (machine->kernel_filename != NULL); 1366 1367 /* Allocate RAM. We allocate it as a single memory region and use 1368 * aliases to address portions of it, mostly for backwards compatibility 1369 * with older qemus that used qemu_ram_alloc(). 1370 */ 1371 ram = g_malloc(sizeof(*ram)); 1372 memory_region_allocate_system_memory(ram, NULL, "pc.ram", 1373 machine->ram_size); 1374 *ram_memory = ram; 1375 ram_below_4g = g_malloc(sizeof(*ram_below_4g)); 1376 memory_region_init_alias(ram_below_4g, NULL, "ram-below-4g", ram, 1377 0, pcms->below_4g_mem_size); 1378 memory_region_add_subregion(system_memory, 0, ram_below_4g); 1379 e820_add_entry(0, pcms->below_4g_mem_size, E820_RAM); 1380 if (pcms->above_4g_mem_size > 0) { 1381 ram_above_4g = g_malloc(sizeof(*ram_above_4g)); 1382 memory_region_init_alias(ram_above_4g, NULL, "ram-above-4g", ram, 1383 pcms->below_4g_mem_size, 1384 pcms->above_4g_mem_size); 1385 memory_region_add_subregion(system_memory, 0x100000000ULL, 1386 ram_above_4g); 1387 e820_add_entry(0x100000000ULL, pcms->above_4g_mem_size, E820_RAM); 1388 } 1389 1390 if (!pcmc->has_reserved_memory && 1391 (machine->ram_slots || 1392 (machine->maxram_size > machine->ram_size))) { 1393 MachineClass *mc = MACHINE_GET_CLASS(machine); 1394 1395 error_report("\"-memory 'slots|maxmem'\" is not supported by: %s", 1396 mc->name); 1397 exit(EXIT_FAILURE); 1398 } 1399 1400 /* initialize hotplug memory address space */ 1401 if (pcmc->has_reserved_memory && 1402 (machine->ram_size < machine->maxram_size)) { 1403 ram_addr_t hotplug_mem_size = 1404 machine->maxram_size - machine->ram_size; 1405 1406 if (machine->ram_slots > ACPI_MAX_RAM_SLOTS) { 1407 error_report("unsupported amount of memory slots: %"PRIu64, 1408 machine->ram_slots); 1409 exit(EXIT_FAILURE); 1410 } 1411 1412 if (QEMU_ALIGN_UP(machine->maxram_size, 1413 TARGET_PAGE_SIZE) != machine->maxram_size) { 1414 error_report("maximum memory size must by aligned to multiple of " 1415 "%d bytes", TARGET_PAGE_SIZE); 1416 exit(EXIT_FAILURE); 1417 } 1418 1419 pcms->hotplug_memory.base = 1420 ROUND_UP(0x100000000ULL + pcms->above_4g_mem_size, 1ULL << 30); 1421 1422 if (pcmc->enforce_aligned_dimm) { 1423 /* size hotplug region assuming 1G page max alignment per slot */ 1424 hotplug_mem_size += (1ULL << 30) * machine->ram_slots; 1425 } 1426 1427 if ((pcms->hotplug_memory.base + hotplug_mem_size) < 1428 hotplug_mem_size) { 1429 error_report("unsupported amount of maximum memory: " RAM_ADDR_FMT, 1430 machine->maxram_size); 1431 exit(EXIT_FAILURE); 1432 } 1433 1434 memory_region_init(&pcms->hotplug_memory.mr, OBJECT(pcms), 1435 "hotplug-memory", hotplug_mem_size); 1436 memory_region_add_subregion(system_memory, pcms->hotplug_memory.base, 1437 &pcms->hotplug_memory.mr); 1438 } 1439 1440 /* Initialize PC system firmware */ 1441 pc_system_firmware_init(rom_memory, !pcmc->pci_enabled); 1442 1443 option_rom_mr = g_malloc(sizeof(*option_rom_mr)); 1444 memory_region_init_ram(option_rom_mr, NULL, "pc.rom", PC_ROM_SIZE, 1445 &error_fatal); 1446 if (pcmc->pci_enabled) { 1447 memory_region_set_readonly(option_rom_mr, true); 1448 } 1449 memory_region_add_subregion_overlap(rom_memory, 1450 PC_ROM_MIN_VGA, 1451 option_rom_mr, 1452 1); 1453 1454 fw_cfg = bochs_bios_init(&address_space_memory, pcms); 1455 1456 rom_set_fw(fw_cfg); 1457 1458 if (pcmc->has_reserved_memory && pcms->hotplug_memory.base) { 1459 uint64_t *val = g_malloc(sizeof(*val)); 1460 PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); 1461 uint64_t res_mem_end = pcms->hotplug_memory.base; 1462 1463 if (!pcmc->broken_reserved_end) { 1464 res_mem_end += memory_region_size(&pcms->hotplug_memory.mr); 1465 } 1466 *val = cpu_to_le64(ROUND_UP(res_mem_end, 0x1ULL << 30)); 1467 fw_cfg_add_file(fw_cfg, "etc/reserved-memory-end", val, sizeof(*val)); 1468 } 1469 1470 if (linux_boot) { 1471 load_linux(pcms, fw_cfg); 1472 } 1473 1474 for (i = 0; i < nb_option_roms; i++) { 1475 rom_add_option(option_rom[i].name, option_rom[i].bootindex); 1476 } 1477 pcms->fw_cfg = fw_cfg; 1478 1479 /* Init default IOAPIC address space */ 1480 pcms->ioapic_as = &address_space_memory; 1481 } 1482 1483 qemu_irq pc_allocate_cpu_irq(void) 1484 { 1485 return qemu_allocate_irq(pic_irq_request, NULL, 0); 1486 } 1487 1488 DeviceState *pc_vga_init(ISABus *isa_bus, PCIBus *pci_bus) 1489 { 1490 DeviceState *dev = NULL; 1491 1492 rom_set_order_override(FW_CFG_ORDER_OVERRIDE_VGA); 1493 if (pci_bus) { 1494 PCIDevice *pcidev = pci_vga_init(pci_bus); 1495 dev = pcidev ? &pcidev->qdev : NULL; 1496 } else if (isa_bus) { 1497 ISADevice *isadev = isa_vga_init(isa_bus); 1498 dev = isadev ? DEVICE(isadev) : NULL; 1499 } 1500 rom_reset_order_override(); 1501 return dev; 1502 } 1503 1504 static const MemoryRegionOps ioport80_io_ops = { 1505 .write = ioport80_write, 1506 .read = ioport80_read, 1507 .endianness = DEVICE_NATIVE_ENDIAN, 1508 .impl = { 1509 .min_access_size = 1, 1510 .max_access_size = 1, 1511 }, 1512 }; 1513 1514 static const MemoryRegionOps ioportF0_io_ops = { 1515 .write = ioportF0_write, 1516 .read = ioportF0_read, 1517 .endianness = DEVICE_NATIVE_ENDIAN, 1518 .impl = { 1519 .min_access_size = 1, 1520 .max_access_size = 1, 1521 }, 1522 }; 1523 1524 void pc_basic_device_init(ISABus *isa_bus, qemu_irq *gsi, 1525 ISADevice **rtc_state, 1526 bool create_fdctrl, 1527 bool no_vmport, 1528 bool has_pit, 1529 uint32_t hpet_irqs) 1530 { 1531 int i; 1532 DriveInfo *fd[MAX_FD]; 1533 DeviceState *hpet = NULL; 1534 int pit_isa_irq = 0; 1535 qemu_irq pit_alt_irq = NULL; 1536 qemu_irq rtc_irq = NULL; 1537 qemu_irq *a20_line; 1538 ISADevice *i8042, *port92, *vmmouse, *pit = NULL; 1539 MemoryRegion *ioport80_io = g_new(MemoryRegion, 1); 1540 MemoryRegion *ioportF0_io = g_new(MemoryRegion, 1); 1541 1542 memory_region_init_io(ioport80_io, NULL, &ioport80_io_ops, NULL, "ioport80", 1); 1543 memory_region_add_subregion(isa_bus->address_space_io, 0x80, ioport80_io); 1544 1545 memory_region_init_io(ioportF0_io, NULL, &ioportF0_io_ops, NULL, "ioportF0", 1); 1546 memory_region_add_subregion(isa_bus->address_space_io, 0xf0, ioportF0_io); 1547 1548 /* 1549 * Check if an HPET shall be created. 1550 * 1551 * Without KVM_CAP_PIT_STATE2, we cannot switch off the in-kernel PIT 1552 * when the HPET wants to take over. Thus we have to disable the latter. 1553 */ 1554 if (!no_hpet && (!kvm_irqchip_in_kernel() || kvm_has_pit_state2())) { 1555 /* In order to set property, here not using sysbus_try_create_simple */ 1556 hpet = qdev_try_create(NULL, TYPE_HPET); 1557 if (hpet) { 1558 /* For pc-piix-*, hpet's intcap is always IRQ2. For pc-q35-1.7 1559 * and earlier, use IRQ2 for compat. Otherwise, use IRQ16~23, 1560 * IRQ8 and IRQ2. 1561 */ 1562 uint8_t compat = object_property_get_uint(OBJECT(hpet), 1563 HPET_INTCAP, NULL); 1564 if (!compat) { 1565 qdev_prop_set_uint32(hpet, HPET_INTCAP, hpet_irqs); 1566 } 1567 qdev_init_nofail(hpet); 1568 sysbus_mmio_map(SYS_BUS_DEVICE(hpet), 0, HPET_BASE); 1569 1570 for (i = 0; i < GSI_NUM_PINS; i++) { 1571 sysbus_connect_irq(SYS_BUS_DEVICE(hpet), i, gsi[i]); 1572 } 1573 pit_isa_irq = -1; 1574 pit_alt_irq = qdev_get_gpio_in(hpet, HPET_LEGACY_PIT_INT); 1575 rtc_irq = qdev_get_gpio_in(hpet, HPET_LEGACY_RTC_INT); 1576 } 1577 } 1578 *rtc_state = rtc_init(isa_bus, 2000, rtc_irq); 1579 1580 qemu_register_boot_set(pc_boot_set, *rtc_state); 1581 1582 if (!xen_enabled() && has_pit) { 1583 if (kvm_pit_in_kernel()) { 1584 pit = kvm_pit_init(isa_bus, 0x40); 1585 } else { 1586 pit = pit_init(isa_bus, 0x40, pit_isa_irq, pit_alt_irq); 1587 } 1588 if (hpet) { 1589 /* connect PIT to output control line of the HPET */ 1590 qdev_connect_gpio_out(hpet, 0, qdev_get_gpio_in(DEVICE(pit), 0)); 1591 } 1592 pcspk_init(isa_bus, pit); 1593 } 1594 1595 serial_hds_isa_init(isa_bus, 0, MAX_SERIAL_PORTS); 1596 parallel_hds_isa_init(isa_bus, MAX_PARALLEL_PORTS); 1597 1598 a20_line = qemu_allocate_irqs(handle_a20_line_change, first_cpu, 2); 1599 i8042 = isa_create_simple(isa_bus, "i8042"); 1600 i8042_setup_a20_line(i8042, a20_line[0]); 1601 if (!no_vmport) { 1602 vmport_init(isa_bus); 1603 vmmouse = isa_try_create(isa_bus, "vmmouse"); 1604 } else { 1605 vmmouse = NULL; 1606 } 1607 if (vmmouse) { 1608 DeviceState *dev = DEVICE(vmmouse); 1609 qdev_prop_set_ptr(dev, "ps2_mouse", i8042); 1610 qdev_init_nofail(dev); 1611 } 1612 port92 = isa_create_simple(isa_bus, "port92"); 1613 port92_init(port92, a20_line[1]); 1614 g_free(a20_line); 1615 1616 DMA_init(isa_bus, 0); 1617 1618 for(i = 0; i < MAX_FD; i++) { 1619 fd[i] = drive_get(IF_FLOPPY, 0, i); 1620 create_fdctrl |= !!fd[i]; 1621 } 1622 if (create_fdctrl) { 1623 fdctrl_init_isa(isa_bus, fd); 1624 } 1625 } 1626 1627 void pc_nic_init(ISABus *isa_bus, PCIBus *pci_bus) 1628 { 1629 int i; 1630 1631 rom_set_order_override(FW_CFG_ORDER_OVERRIDE_NIC); 1632 for (i = 0; i < nb_nics; i++) { 1633 NICInfo *nd = &nd_table[i]; 1634 1635 if (!pci_bus || (nd->model && strcmp(nd->model, "ne2k_isa") == 0)) { 1636 pc_init_ne2k_isa(isa_bus, nd); 1637 } else { 1638 pci_nic_init_nofail(nd, pci_bus, "e1000", NULL); 1639 } 1640 } 1641 rom_reset_order_override(); 1642 } 1643 1644 void pc_pci_device_init(PCIBus *pci_bus) 1645 { 1646 int max_bus; 1647 int bus; 1648 1649 /* Note: if=scsi is deprecated with PC machine types */ 1650 max_bus = drive_get_max_bus(IF_SCSI); 1651 for (bus = 0; bus <= max_bus; bus++) { 1652 pci_create_simple(pci_bus, -1, "lsi53c895a"); 1653 /* 1654 * By not creating frontends here, we make 1655 * scsi_legacy_handle_cmdline() create them, and warn that 1656 * this usage is deprecated. 1657 */ 1658 } 1659 } 1660 1661 void ioapic_init_gsi(GSIState *gsi_state, const char *parent_name) 1662 { 1663 DeviceState *dev; 1664 SysBusDevice *d; 1665 unsigned int i; 1666 1667 if (kvm_ioapic_in_kernel()) { 1668 dev = qdev_create(NULL, "kvm-ioapic"); 1669 } else { 1670 dev = qdev_create(NULL, "ioapic"); 1671 } 1672 if (parent_name) { 1673 object_property_add_child(object_resolve_path(parent_name, NULL), 1674 "ioapic", OBJECT(dev), NULL); 1675 } 1676 qdev_init_nofail(dev); 1677 d = SYS_BUS_DEVICE(dev); 1678 sysbus_mmio_map(d, 0, IO_APIC_DEFAULT_ADDRESS); 1679 1680 for (i = 0; i < IOAPIC_NUM_PINS; i++) { 1681 gsi_state->ioapic_irq[i] = qdev_get_gpio_in(dev, i); 1682 } 1683 } 1684 1685 static void pc_dimm_plug(HotplugHandler *hotplug_dev, 1686 DeviceState *dev, Error **errp) 1687 { 1688 HotplugHandlerClass *hhc; 1689 Error *local_err = NULL; 1690 PCMachineState *pcms = PC_MACHINE(hotplug_dev); 1691 PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); 1692 PCDIMMDevice *dimm = PC_DIMM(dev); 1693 PCDIMMDeviceClass *ddc = PC_DIMM_GET_CLASS(dimm); 1694 MemoryRegion *mr; 1695 uint64_t align = TARGET_PAGE_SIZE; 1696 bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM); 1697 1698 mr = ddc->get_memory_region(dimm, &local_err); 1699 if (local_err) { 1700 goto out; 1701 } 1702 1703 if (memory_region_get_alignment(mr) && pcmc->enforce_aligned_dimm) { 1704 align = memory_region_get_alignment(mr); 1705 } 1706 1707 if (!pcms->acpi_dev) { 1708 error_setg(&local_err, 1709 "memory hotplug is not enabled: missing acpi device"); 1710 goto out; 1711 } 1712 1713 if (is_nvdimm && !pcms->acpi_nvdimm_state.is_enabled) { 1714 error_setg(&local_err, 1715 "nvdimm is not enabled: missing 'nvdimm' in '-M'"); 1716 goto out; 1717 } 1718 1719 pc_dimm_memory_plug(dev, &pcms->hotplug_memory, mr, align, &local_err); 1720 if (local_err) { 1721 goto out; 1722 } 1723 1724 if (is_nvdimm) { 1725 nvdimm_plug(&pcms->acpi_nvdimm_state); 1726 } 1727 1728 hhc = HOTPLUG_HANDLER_GET_CLASS(pcms->acpi_dev); 1729 hhc->plug(HOTPLUG_HANDLER(pcms->acpi_dev), dev, &error_abort); 1730 out: 1731 error_propagate(errp, local_err); 1732 } 1733 1734 static void pc_dimm_unplug_request(HotplugHandler *hotplug_dev, 1735 DeviceState *dev, Error **errp) 1736 { 1737 HotplugHandlerClass *hhc; 1738 Error *local_err = NULL; 1739 PCMachineState *pcms = PC_MACHINE(hotplug_dev); 1740 1741 if (!pcms->acpi_dev) { 1742 error_setg(&local_err, 1743 "memory hotplug is not enabled: missing acpi device"); 1744 goto out; 1745 } 1746 1747 if (object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM)) { 1748 error_setg(&local_err, 1749 "nvdimm device hot unplug is not supported yet."); 1750 goto out; 1751 } 1752 1753 hhc = HOTPLUG_HANDLER_GET_CLASS(pcms->acpi_dev); 1754 hhc->unplug_request(HOTPLUG_HANDLER(pcms->acpi_dev), dev, &local_err); 1755 1756 out: 1757 error_propagate(errp, local_err); 1758 } 1759 1760 static void pc_dimm_unplug(HotplugHandler *hotplug_dev, 1761 DeviceState *dev, Error **errp) 1762 { 1763 PCMachineState *pcms = PC_MACHINE(hotplug_dev); 1764 PCDIMMDevice *dimm = PC_DIMM(dev); 1765 PCDIMMDeviceClass *ddc = PC_DIMM_GET_CLASS(dimm); 1766 MemoryRegion *mr; 1767 HotplugHandlerClass *hhc; 1768 Error *local_err = NULL; 1769 1770 mr = ddc->get_memory_region(dimm, &local_err); 1771 if (local_err) { 1772 goto out; 1773 } 1774 1775 hhc = HOTPLUG_HANDLER_GET_CLASS(pcms->acpi_dev); 1776 hhc->unplug(HOTPLUG_HANDLER(pcms->acpi_dev), dev, &local_err); 1777 1778 if (local_err) { 1779 goto out; 1780 } 1781 1782 pc_dimm_memory_unplug(dev, &pcms->hotplug_memory, mr); 1783 object_unparent(OBJECT(dev)); 1784 1785 out: 1786 error_propagate(errp, local_err); 1787 } 1788 1789 static int pc_apic_cmp(const void *a, const void *b) 1790 { 1791 CPUArchId *apic_a = (CPUArchId *)a; 1792 CPUArchId *apic_b = (CPUArchId *)b; 1793 1794 return apic_a->arch_id - apic_b->arch_id; 1795 } 1796 1797 /* returns pointer to CPUArchId descriptor that matches CPU's apic_id 1798 * in ms->possible_cpus->cpus, if ms->possible_cpus->cpus has no 1799 * entry corresponding to CPU's apic_id returns NULL. 1800 */ 1801 static CPUArchId *pc_find_cpu_slot(MachineState *ms, uint32_t id, int *idx) 1802 { 1803 CPUArchId apic_id, *found_cpu; 1804 1805 apic_id.arch_id = id; 1806 found_cpu = bsearch(&apic_id, ms->possible_cpus->cpus, 1807 ms->possible_cpus->len, sizeof(*ms->possible_cpus->cpus), 1808 pc_apic_cmp); 1809 if (found_cpu && idx) { 1810 *idx = found_cpu - ms->possible_cpus->cpus; 1811 } 1812 return found_cpu; 1813 } 1814 1815 static void pc_cpu_plug(HotplugHandler *hotplug_dev, 1816 DeviceState *dev, Error **errp) 1817 { 1818 CPUArchId *found_cpu; 1819 HotplugHandlerClass *hhc; 1820 Error *local_err = NULL; 1821 X86CPU *cpu = X86_CPU(dev); 1822 PCMachineState *pcms = PC_MACHINE(hotplug_dev); 1823 1824 if (pcms->acpi_dev) { 1825 hhc = HOTPLUG_HANDLER_GET_CLASS(pcms->acpi_dev); 1826 hhc->plug(HOTPLUG_HANDLER(pcms->acpi_dev), dev, &local_err); 1827 if (local_err) { 1828 goto out; 1829 } 1830 } 1831 1832 /* increment the number of CPUs */ 1833 pcms->boot_cpus++; 1834 if (pcms->rtc) { 1835 rtc_set_cpus_count(pcms->rtc, pcms->boot_cpus); 1836 } 1837 if (pcms->fw_cfg) { 1838 fw_cfg_modify_i16(pcms->fw_cfg, FW_CFG_NB_CPUS, pcms->boot_cpus); 1839 } 1840 1841 found_cpu = pc_find_cpu_slot(MACHINE(pcms), cpu->apic_id, NULL); 1842 found_cpu->cpu = OBJECT(dev); 1843 out: 1844 error_propagate(errp, local_err); 1845 } 1846 static void pc_cpu_unplug_request_cb(HotplugHandler *hotplug_dev, 1847 DeviceState *dev, Error **errp) 1848 { 1849 int idx = -1; 1850 HotplugHandlerClass *hhc; 1851 Error *local_err = NULL; 1852 X86CPU *cpu = X86_CPU(dev); 1853 PCMachineState *pcms = PC_MACHINE(hotplug_dev); 1854 1855 pc_find_cpu_slot(MACHINE(pcms), cpu->apic_id, &idx); 1856 assert(idx != -1); 1857 if (idx == 0) { 1858 error_setg(&local_err, "Boot CPU is unpluggable"); 1859 goto out; 1860 } 1861 1862 hhc = HOTPLUG_HANDLER_GET_CLASS(pcms->acpi_dev); 1863 hhc->unplug_request(HOTPLUG_HANDLER(pcms->acpi_dev), dev, &local_err); 1864 1865 if (local_err) { 1866 goto out; 1867 } 1868 1869 out: 1870 error_propagate(errp, local_err); 1871 1872 } 1873 1874 static void pc_cpu_unplug_cb(HotplugHandler *hotplug_dev, 1875 DeviceState *dev, Error **errp) 1876 { 1877 CPUArchId *found_cpu; 1878 HotplugHandlerClass *hhc; 1879 Error *local_err = NULL; 1880 X86CPU *cpu = X86_CPU(dev); 1881 PCMachineState *pcms = PC_MACHINE(hotplug_dev); 1882 1883 hhc = HOTPLUG_HANDLER_GET_CLASS(pcms->acpi_dev); 1884 hhc->unplug(HOTPLUG_HANDLER(pcms->acpi_dev), dev, &local_err); 1885 1886 if (local_err) { 1887 goto out; 1888 } 1889 1890 found_cpu = pc_find_cpu_slot(MACHINE(pcms), cpu->apic_id, NULL); 1891 found_cpu->cpu = NULL; 1892 object_unparent(OBJECT(dev)); 1893 1894 /* decrement the number of CPUs */ 1895 pcms->boot_cpus--; 1896 /* Update the number of CPUs in CMOS */ 1897 rtc_set_cpus_count(pcms->rtc, pcms->boot_cpus); 1898 fw_cfg_modify_i16(pcms->fw_cfg, FW_CFG_NB_CPUS, pcms->boot_cpus); 1899 out: 1900 error_propagate(errp, local_err); 1901 } 1902 1903 static void pc_cpu_pre_plug(HotplugHandler *hotplug_dev, 1904 DeviceState *dev, Error **errp) 1905 { 1906 int idx; 1907 CPUState *cs; 1908 CPUArchId *cpu_slot; 1909 X86CPUTopoInfo topo; 1910 X86CPU *cpu = X86_CPU(dev); 1911 PCMachineState *pcms = PC_MACHINE(hotplug_dev); 1912 1913 /* if APIC ID is not set, set it based on socket/core/thread properties */ 1914 if (cpu->apic_id == UNASSIGNED_APIC_ID) { 1915 int max_socket = (max_cpus - 1) / smp_threads / smp_cores; 1916 1917 if (cpu->socket_id < 0) { 1918 error_setg(errp, "CPU socket-id is not set"); 1919 return; 1920 } else if (cpu->socket_id > max_socket) { 1921 error_setg(errp, "Invalid CPU socket-id: %u must be in range 0:%u", 1922 cpu->socket_id, max_socket); 1923 return; 1924 } 1925 if (cpu->core_id < 0) { 1926 error_setg(errp, "CPU core-id is not set"); 1927 return; 1928 } else if (cpu->core_id > (smp_cores - 1)) { 1929 error_setg(errp, "Invalid CPU core-id: %u must be in range 0:%u", 1930 cpu->core_id, smp_cores - 1); 1931 return; 1932 } 1933 if (cpu->thread_id < 0) { 1934 error_setg(errp, "CPU thread-id is not set"); 1935 return; 1936 } else if (cpu->thread_id > (smp_threads - 1)) { 1937 error_setg(errp, "Invalid CPU thread-id: %u must be in range 0:%u", 1938 cpu->thread_id, smp_threads - 1); 1939 return; 1940 } 1941 1942 topo.pkg_id = cpu->socket_id; 1943 topo.core_id = cpu->core_id; 1944 topo.smt_id = cpu->thread_id; 1945 cpu->apic_id = apicid_from_topo_ids(smp_cores, smp_threads, &topo); 1946 } 1947 1948 cpu_slot = pc_find_cpu_slot(MACHINE(pcms), cpu->apic_id, &idx); 1949 if (!cpu_slot) { 1950 MachineState *ms = MACHINE(pcms); 1951 1952 x86_topo_ids_from_apicid(cpu->apic_id, smp_cores, smp_threads, &topo); 1953 error_setg(errp, "Invalid CPU [socket: %u, core: %u, thread: %u] with" 1954 " APIC ID %" PRIu32 ", valid index range 0:%d", 1955 topo.pkg_id, topo.core_id, topo.smt_id, cpu->apic_id, 1956 ms->possible_cpus->len - 1); 1957 return; 1958 } 1959 1960 if (cpu_slot->cpu) { 1961 error_setg(errp, "CPU[%d] with APIC ID %" PRIu32 " exists", 1962 idx, cpu->apic_id); 1963 return; 1964 } 1965 1966 /* if 'address' properties socket-id/core-id/thread-id are not set, set them 1967 * so that machine_query_hotpluggable_cpus would show correct values 1968 */ 1969 /* TODO: move socket_id/core_id/thread_id checks into x86_cpu_realizefn() 1970 * once -smp refactoring is complete and there will be CPU private 1971 * CPUState::nr_cores and CPUState::nr_threads fields instead of globals */ 1972 x86_topo_ids_from_apicid(cpu->apic_id, smp_cores, smp_threads, &topo); 1973 if (cpu->socket_id != -1 && cpu->socket_id != topo.pkg_id) { 1974 error_setg(errp, "property socket-id: %u doesn't match set apic-id:" 1975 " 0x%x (socket-id: %u)", cpu->socket_id, cpu->apic_id, topo.pkg_id); 1976 return; 1977 } 1978 cpu->socket_id = topo.pkg_id; 1979 1980 if (cpu->core_id != -1 && cpu->core_id != topo.core_id) { 1981 error_setg(errp, "property core-id: %u doesn't match set apic-id:" 1982 " 0x%x (core-id: %u)", cpu->core_id, cpu->apic_id, topo.core_id); 1983 return; 1984 } 1985 cpu->core_id = topo.core_id; 1986 1987 if (cpu->thread_id != -1 && cpu->thread_id != topo.smt_id) { 1988 error_setg(errp, "property thread-id: %u doesn't match set apic-id:" 1989 " 0x%x (thread-id: %u)", cpu->thread_id, cpu->apic_id, topo.smt_id); 1990 return; 1991 } 1992 cpu->thread_id = topo.smt_id; 1993 1994 cs = CPU(cpu); 1995 cs->cpu_index = idx; 1996 1997 numa_cpu_pre_plug(cpu_slot, dev, errp); 1998 } 1999 2000 static void pc_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev, 2001 DeviceState *dev, Error **errp) 2002 { 2003 if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { 2004 pc_cpu_pre_plug(hotplug_dev, dev, errp); 2005 } 2006 } 2007 2008 static void pc_machine_device_plug_cb(HotplugHandler *hotplug_dev, 2009 DeviceState *dev, Error **errp) 2010 { 2011 if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { 2012 pc_dimm_plug(hotplug_dev, dev, errp); 2013 } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { 2014 pc_cpu_plug(hotplug_dev, dev, errp); 2015 } 2016 } 2017 2018 static void pc_machine_device_unplug_request_cb(HotplugHandler *hotplug_dev, 2019 DeviceState *dev, Error **errp) 2020 { 2021 if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { 2022 pc_dimm_unplug_request(hotplug_dev, dev, errp); 2023 } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { 2024 pc_cpu_unplug_request_cb(hotplug_dev, dev, errp); 2025 } else { 2026 error_setg(errp, "acpi: device unplug request for not supported device" 2027 " type: %s", object_get_typename(OBJECT(dev))); 2028 } 2029 } 2030 2031 static void pc_machine_device_unplug_cb(HotplugHandler *hotplug_dev, 2032 DeviceState *dev, Error **errp) 2033 { 2034 if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { 2035 pc_dimm_unplug(hotplug_dev, dev, errp); 2036 } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { 2037 pc_cpu_unplug_cb(hotplug_dev, dev, errp); 2038 } else { 2039 error_setg(errp, "acpi: device unplug for not supported device" 2040 " type: %s", object_get_typename(OBJECT(dev))); 2041 } 2042 } 2043 2044 static HotplugHandler *pc_get_hotpug_handler(MachineState *machine, 2045 DeviceState *dev) 2046 { 2047 PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(machine); 2048 2049 if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM) || 2050 object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { 2051 return HOTPLUG_HANDLER(machine); 2052 } 2053 2054 return pcmc->get_hotplug_handler ? 2055 pcmc->get_hotplug_handler(machine, dev) : NULL; 2056 } 2057 2058 static void 2059 pc_machine_get_hotplug_memory_region_size(Object *obj, Visitor *v, 2060 const char *name, void *opaque, 2061 Error **errp) 2062 { 2063 PCMachineState *pcms = PC_MACHINE(obj); 2064 int64_t value = memory_region_size(&pcms->hotplug_memory.mr); 2065 2066 visit_type_int(v, name, &value, errp); 2067 } 2068 2069 static void pc_machine_get_max_ram_below_4g(Object *obj, Visitor *v, 2070 const char *name, void *opaque, 2071 Error **errp) 2072 { 2073 PCMachineState *pcms = PC_MACHINE(obj); 2074 uint64_t value = pcms->max_ram_below_4g; 2075 2076 visit_type_size(v, name, &value, errp); 2077 } 2078 2079 static void pc_machine_set_max_ram_below_4g(Object *obj, Visitor *v, 2080 const char *name, void *opaque, 2081 Error **errp) 2082 { 2083 PCMachineState *pcms = PC_MACHINE(obj); 2084 Error *error = NULL; 2085 uint64_t value; 2086 2087 visit_type_size(v, name, &value, &error); 2088 if (error) { 2089 error_propagate(errp, error); 2090 return; 2091 } 2092 if (value > (1ULL << 32)) { 2093 error_setg(&error, 2094 "Machine option 'max-ram-below-4g=%"PRIu64 2095 "' expects size less than or equal to 4G", value); 2096 error_propagate(errp, error); 2097 return; 2098 } 2099 2100 if (value < (1ULL << 20)) { 2101 warn_report("small max_ram_below_4g(%"PRIu64 2102 ") less than 1M. BIOS may not work..", 2103 value); 2104 } 2105 2106 pcms->max_ram_below_4g = value; 2107 } 2108 2109 static void pc_machine_get_vmport(Object *obj, Visitor *v, const char *name, 2110 void *opaque, Error **errp) 2111 { 2112 PCMachineState *pcms = PC_MACHINE(obj); 2113 OnOffAuto vmport = pcms->vmport; 2114 2115 visit_type_OnOffAuto(v, name, &vmport, errp); 2116 } 2117 2118 static void pc_machine_set_vmport(Object *obj, Visitor *v, const char *name, 2119 void *opaque, Error **errp) 2120 { 2121 PCMachineState *pcms = PC_MACHINE(obj); 2122 2123 visit_type_OnOffAuto(v, name, &pcms->vmport, errp); 2124 } 2125 2126 bool pc_machine_is_smm_enabled(PCMachineState *pcms) 2127 { 2128 bool smm_available = false; 2129 2130 if (pcms->smm == ON_OFF_AUTO_OFF) { 2131 return false; 2132 } 2133 2134 if (tcg_enabled() || qtest_enabled()) { 2135 smm_available = true; 2136 } else if (kvm_enabled()) { 2137 smm_available = kvm_has_smm(); 2138 } 2139 2140 if (smm_available) { 2141 return true; 2142 } 2143 2144 if (pcms->smm == ON_OFF_AUTO_ON) { 2145 error_report("System Management Mode not supported by this hypervisor."); 2146 exit(1); 2147 } 2148 return false; 2149 } 2150 2151 static void pc_machine_get_smm(Object *obj, Visitor *v, const char *name, 2152 void *opaque, Error **errp) 2153 { 2154 PCMachineState *pcms = PC_MACHINE(obj); 2155 OnOffAuto smm = pcms->smm; 2156 2157 visit_type_OnOffAuto(v, name, &smm, errp); 2158 } 2159 2160 static void pc_machine_set_smm(Object *obj, Visitor *v, const char *name, 2161 void *opaque, Error **errp) 2162 { 2163 PCMachineState *pcms = PC_MACHINE(obj); 2164 2165 visit_type_OnOffAuto(v, name, &pcms->smm, errp); 2166 } 2167 2168 static bool pc_machine_get_nvdimm(Object *obj, Error **errp) 2169 { 2170 PCMachineState *pcms = PC_MACHINE(obj); 2171 2172 return pcms->acpi_nvdimm_state.is_enabled; 2173 } 2174 2175 static void pc_machine_set_nvdimm(Object *obj, bool value, Error **errp) 2176 { 2177 PCMachineState *pcms = PC_MACHINE(obj); 2178 2179 pcms->acpi_nvdimm_state.is_enabled = value; 2180 } 2181 2182 static bool pc_machine_get_smbus(Object *obj, Error **errp) 2183 { 2184 PCMachineState *pcms = PC_MACHINE(obj); 2185 2186 return pcms->smbus; 2187 } 2188 2189 static void pc_machine_set_smbus(Object *obj, bool value, Error **errp) 2190 { 2191 PCMachineState *pcms = PC_MACHINE(obj); 2192 2193 pcms->smbus = value; 2194 } 2195 2196 static bool pc_machine_get_sata(Object *obj, Error **errp) 2197 { 2198 PCMachineState *pcms = PC_MACHINE(obj); 2199 2200 return pcms->sata; 2201 } 2202 2203 static void pc_machine_set_sata(Object *obj, bool value, Error **errp) 2204 { 2205 PCMachineState *pcms = PC_MACHINE(obj); 2206 2207 pcms->sata = value; 2208 } 2209 2210 static bool pc_machine_get_pit(Object *obj, Error **errp) 2211 { 2212 PCMachineState *pcms = PC_MACHINE(obj); 2213 2214 return pcms->pit; 2215 } 2216 2217 static void pc_machine_set_pit(Object *obj, bool value, Error **errp) 2218 { 2219 PCMachineState *pcms = PC_MACHINE(obj); 2220 2221 pcms->pit = value; 2222 } 2223 2224 static void pc_machine_initfn(Object *obj) 2225 { 2226 PCMachineState *pcms = PC_MACHINE(obj); 2227 2228 pcms->max_ram_below_4g = 0; /* use default */ 2229 pcms->smm = ON_OFF_AUTO_AUTO; 2230 pcms->vmport = ON_OFF_AUTO_AUTO; 2231 /* nvdimm is disabled on default. */ 2232 pcms->acpi_nvdimm_state.is_enabled = false; 2233 /* acpi build is enabled by default if machine supports it */ 2234 pcms->acpi_build_enabled = PC_MACHINE_GET_CLASS(pcms)->has_acpi_build; 2235 pcms->smbus = true; 2236 pcms->sata = true; 2237 pcms->pit = true; 2238 } 2239 2240 static void pc_machine_reset(void) 2241 { 2242 CPUState *cs; 2243 X86CPU *cpu; 2244 2245 qemu_devices_reset(); 2246 2247 /* Reset APIC after devices have been reset to cancel 2248 * any changes that qemu_devices_reset() might have done. 2249 */ 2250 CPU_FOREACH(cs) { 2251 cpu = X86_CPU(cs); 2252 2253 if (cpu->apic_state) { 2254 device_reset(cpu->apic_state); 2255 } 2256 } 2257 } 2258 2259 static CpuInstanceProperties 2260 pc_cpu_index_to_props(MachineState *ms, unsigned cpu_index) 2261 { 2262 MachineClass *mc = MACHINE_GET_CLASS(ms); 2263 const CPUArchIdList *possible_cpus = mc->possible_cpu_arch_ids(ms); 2264 2265 assert(cpu_index < possible_cpus->len); 2266 return possible_cpus->cpus[cpu_index].props; 2267 } 2268 2269 static const CPUArchIdList *pc_possible_cpu_arch_ids(MachineState *ms) 2270 { 2271 int i; 2272 2273 if (ms->possible_cpus) { 2274 /* 2275 * make sure that max_cpus hasn't changed since the first use, i.e. 2276 * -smp hasn't been parsed after it 2277 */ 2278 assert(ms->possible_cpus->len == max_cpus); 2279 return ms->possible_cpus; 2280 } 2281 2282 ms->possible_cpus = g_malloc0(sizeof(CPUArchIdList) + 2283 sizeof(CPUArchId) * max_cpus); 2284 ms->possible_cpus->len = max_cpus; 2285 for (i = 0; i < ms->possible_cpus->len; i++) { 2286 X86CPUTopoInfo topo; 2287 2288 ms->possible_cpus->cpus[i].vcpus_count = 1; 2289 ms->possible_cpus->cpus[i].arch_id = x86_cpu_apic_id_from_index(i); 2290 x86_topo_ids_from_apicid(ms->possible_cpus->cpus[i].arch_id, 2291 smp_cores, smp_threads, &topo); 2292 ms->possible_cpus->cpus[i].props.has_socket_id = true; 2293 ms->possible_cpus->cpus[i].props.socket_id = topo.pkg_id; 2294 ms->possible_cpus->cpus[i].props.has_core_id = true; 2295 ms->possible_cpus->cpus[i].props.core_id = topo.core_id; 2296 ms->possible_cpus->cpus[i].props.has_thread_id = true; 2297 ms->possible_cpus->cpus[i].props.thread_id = topo.smt_id; 2298 2299 /* default distribution of CPUs over NUMA nodes */ 2300 if (nb_numa_nodes) { 2301 /* preset values but do not enable them i.e. 'has_node_id = false', 2302 * numa init code will enable them later if manual mapping wasn't 2303 * present on CLI */ 2304 ms->possible_cpus->cpus[i].props.node_id = 2305 topo.pkg_id % nb_numa_nodes; 2306 } 2307 } 2308 return ms->possible_cpus; 2309 } 2310 2311 static void x86_nmi(NMIState *n, int cpu_index, Error **errp) 2312 { 2313 /* cpu index isn't used */ 2314 CPUState *cs; 2315 2316 CPU_FOREACH(cs) { 2317 X86CPU *cpu = X86_CPU(cs); 2318 2319 if (!cpu->apic_state) { 2320 cpu_interrupt(cs, CPU_INTERRUPT_NMI); 2321 } else { 2322 apic_deliver_nmi(cpu->apic_state); 2323 } 2324 } 2325 } 2326 2327 static void pc_machine_class_init(ObjectClass *oc, void *data) 2328 { 2329 MachineClass *mc = MACHINE_CLASS(oc); 2330 PCMachineClass *pcmc = PC_MACHINE_CLASS(oc); 2331 HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(oc); 2332 NMIClass *nc = NMI_CLASS(oc); 2333 2334 pcmc->get_hotplug_handler = mc->get_hotplug_handler; 2335 pcmc->pci_enabled = true; 2336 pcmc->has_acpi_build = true; 2337 pcmc->rsdp_in_ram = true; 2338 pcmc->smbios_defaults = true; 2339 pcmc->smbios_uuid_encoded = true; 2340 pcmc->gigabyte_align = true; 2341 pcmc->has_reserved_memory = true; 2342 pcmc->kvmclock_enabled = true; 2343 pcmc->enforce_aligned_dimm = true; 2344 /* BIOS ACPI tables: 128K. Other BIOS datastructures: less than 4K reported 2345 * to be used at the moment, 32K should be enough for a while. */ 2346 pcmc->acpi_data_size = 0x20000 + 0x8000; 2347 pcmc->save_tsc_khz = true; 2348 pcmc->linuxboot_dma_enabled = true; 2349 mc->get_hotplug_handler = pc_get_hotpug_handler; 2350 mc->cpu_index_to_instance_props = pc_cpu_index_to_props; 2351 mc->possible_cpu_arch_ids = pc_possible_cpu_arch_ids; 2352 mc->has_hotpluggable_cpus = true; 2353 mc->default_boot_order = "cad"; 2354 mc->hot_add_cpu = pc_hot_add_cpu; 2355 mc->block_default_type = IF_IDE; 2356 mc->max_cpus = 255; 2357 mc->reset = pc_machine_reset; 2358 hc->pre_plug = pc_machine_device_pre_plug_cb; 2359 hc->plug = pc_machine_device_plug_cb; 2360 hc->unplug_request = pc_machine_device_unplug_request_cb; 2361 hc->unplug = pc_machine_device_unplug_cb; 2362 nc->nmi_monitor_handler = x86_nmi; 2363 2364 object_class_property_add(oc, PC_MACHINE_MEMHP_REGION_SIZE, "int", 2365 pc_machine_get_hotplug_memory_region_size, NULL, 2366 NULL, NULL, &error_abort); 2367 2368 object_class_property_add(oc, PC_MACHINE_MAX_RAM_BELOW_4G, "size", 2369 pc_machine_get_max_ram_below_4g, pc_machine_set_max_ram_below_4g, 2370 NULL, NULL, &error_abort); 2371 2372 object_class_property_set_description(oc, PC_MACHINE_MAX_RAM_BELOW_4G, 2373 "Maximum ram below the 4G boundary (32bit boundary)", &error_abort); 2374 2375 object_class_property_add(oc, PC_MACHINE_SMM, "OnOffAuto", 2376 pc_machine_get_smm, pc_machine_set_smm, 2377 NULL, NULL, &error_abort); 2378 object_class_property_set_description(oc, PC_MACHINE_SMM, 2379 "Enable SMM (pc & q35)", &error_abort); 2380 2381 object_class_property_add(oc, PC_MACHINE_VMPORT, "OnOffAuto", 2382 pc_machine_get_vmport, pc_machine_set_vmport, 2383 NULL, NULL, &error_abort); 2384 object_class_property_set_description(oc, PC_MACHINE_VMPORT, 2385 "Enable vmport (pc & q35)", &error_abort); 2386 2387 object_class_property_add_bool(oc, PC_MACHINE_NVDIMM, 2388 pc_machine_get_nvdimm, pc_machine_set_nvdimm, &error_abort); 2389 2390 object_class_property_add_bool(oc, PC_MACHINE_SMBUS, 2391 pc_machine_get_smbus, pc_machine_set_smbus, &error_abort); 2392 2393 object_class_property_add_bool(oc, PC_MACHINE_SATA, 2394 pc_machine_get_sata, pc_machine_set_sata, &error_abort); 2395 2396 object_class_property_add_bool(oc, PC_MACHINE_PIT, 2397 pc_machine_get_pit, pc_machine_set_pit, &error_abort); 2398 } 2399 2400 static const TypeInfo pc_machine_info = { 2401 .name = TYPE_PC_MACHINE, 2402 .parent = TYPE_MACHINE, 2403 .abstract = true, 2404 .instance_size = sizeof(PCMachineState), 2405 .instance_init = pc_machine_initfn, 2406 .class_size = sizeof(PCMachineClass), 2407 .class_init = pc_machine_class_init, 2408 .interfaces = (InterfaceInfo[]) { 2409 { TYPE_HOTPLUG_HANDLER }, 2410 { TYPE_NMI }, 2411 { } 2412 }, 2413 }; 2414 2415 static void pc_machine_register_types(void) 2416 { 2417 type_register_static(&pc_machine_info); 2418 } 2419 2420 type_init(pc_machine_register_types) 2421