1 /* 2 * QEMU PC System Emulator 3 * 4 * Copyright (c) 2003-2004 Fabrice Bellard 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a copy 7 * of this software and associated documentation files (the "Software"), to deal 8 * in the Software without restriction, including without limitation the rights 9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 * copies of the Software, and to permit persons to whom the Software is 11 * furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice shall be included in 14 * all copies or substantial portions of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 22 * THE SOFTWARE. 23 */ 24 25 #include "qemu/osdep.h" 26 #include "qemu/units.h" 27 #include "hw/i386/x86.h" 28 #include "hw/i386/pc.h" 29 #include "hw/char/serial.h" 30 #include "hw/char/parallel.h" 31 #include "hw/i386/apic.h" 32 #include "hw/i386/topology.h" 33 #include "hw/i386/fw_cfg.h" 34 #include "sysemu/cpus.h" 35 #include "hw/block/fdc.h" 36 #include "hw/ide.h" 37 #include "hw/pci/pci.h" 38 #include "hw/pci/pci_bus.h" 39 #include "hw/nvram/fw_cfg.h" 40 #include "hw/timer/hpet.h" 41 #include "hw/firmware/smbios.h" 42 #include "hw/loader.h" 43 #include "elf.h" 44 #include "migration/vmstate.h" 45 #include "multiboot.h" 46 #include "hw/rtc/mc146818rtc.h" 47 #include "hw/intc/i8259.h" 48 #include "hw/dma/i8257.h" 49 #include "hw/timer/i8254.h" 50 #include "hw/input/i8042.h" 51 #include "hw/irq.h" 52 #include "hw/audio/pcspk.h" 53 #include "hw/pci/msi.h" 54 #include "hw/sysbus.h" 55 #include "sysemu/sysemu.h" 56 #include "sysemu/tcg.h" 57 #include "sysemu/numa.h" 58 #include "sysemu/kvm.h" 59 #include "sysemu/qtest.h" 60 #include "sysemu/reset.h" 61 #include "sysemu/runstate.h" 62 #include "kvm_i386.h" 63 #include "hw/xen/xen.h" 64 #include "hw/xen/start_info.h" 65 #include "ui/qemu-spice.h" 66 #include "exec/memory.h" 67 #include "exec/address-spaces.h" 68 #include "sysemu/arch_init.h" 69 #include "qemu/bitmap.h" 70 #include "qemu/config-file.h" 71 #include "qemu/error-report.h" 72 #include "qemu/option.h" 73 #include "qemu/cutils.h" 74 #include "hw/acpi/acpi.h" 75 #include "hw/acpi/cpu_hotplug.h" 76 #include "hw/boards.h" 77 #include "acpi-build.h" 78 #include "hw/mem/pc-dimm.h" 79 #include "hw/mem/nvdimm.h" 80 #include "qapi/error.h" 81 #include "qapi/qapi-visit-common.h" 82 #include "qapi/visitor.h" 83 #include "hw/core/cpu.h" 84 #include "hw/usb.h" 85 #include "hw/i386/intel_iommu.h" 86 #include "hw/net/ne2000-isa.h" 87 #include "standard-headers/asm-x86/bootparam.h" 88 #include "hw/virtio/virtio-pmem-pci.h" 89 #include "hw/mem/memory-device.h" 90 #include "sysemu/replay.h" 91 #include "qapi/qmp/qerror.h" 92 #include "config-devices.h" 93 #include "e820_memory_layout.h" 94 #include "fw_cfg.h" 95 #include "trace.h" 96 97 GlobalProperty pc_compat_4_2[] = { 98 { "mch", "smbase-smram", "off" }, 99 }; 100 const size_t pc_compat_4_2_len = G_N_ELEMENTS(pc_compat_4_2); 101 102 GlobalProperty pc_compat_4_1[] = {}; 103 const size_t pc_compat_4_1_len = G_N_ELEMENTS(pc_compat_4_1); 104 105 GlobalProperty pc_compat_4_0[] = {}; 106 const size_t pc_compat_4_0_len = G_N_ELEMENTS(pc_compat_4_0); 107 108 GlobalProperty pc_compat_3_1[] = { 109 { "intel-iommu", "dma-drain", "off" }, 110 { "Opteron_G3" "-" TYPE_X86_CPU, "rdtscp", "off" }, 111 { "Opteron_G4" "-" TYPE_X86_CPU, "rdtscp", "off" }, 112 { "Opteron_G4" "-" TYPE_X86_CPU, "npt", "off" }, 113 { "Opteron_G4" "-" TYPE_X86_CPU, "nrip-save", "off" }, 114 { "Opteron_G5" "-" TYPE_X86_CPU, "rdtscp", "off" }, 115 { "Opteron_G5" "-" TYPE_X86_CPU, "npt", "off" }, 116 { "Opteron_G5" "-" TYPE_X86_CPU, "nrip-save", "off" }, 117 { "EPYC" "-" TYPE_X86_CPU, "npt", "off" }, 118 { "EPYC" "-" TYPE_X86_CPU, "nrip-save", "off" }, 119 { "EPYC-IBPB" "-" TYPE_X86_CPU, "npt", "off" }, 120 { "EPYC-IBPB" "-" TYPE_X86_CPU, "nrip-save", "off" }, 121 { "Skylake-Client" "-" TYPE_X86_CPU, "mpx", "on" }, 122 { "Skylake-Client-IBRS" "-" TYPE_X86_CPU, "mpx", "on" }, 123 { "Skylake-Server" "-" TYPE_X86_CPU, "mpx", "on" }, 124 { "Skylake-Server-IBRS" "-" TYPE_X86_CPU, "mpx", "on" }, 125 { "Cascadelake-Server" "-" TYPE_X86_CPU, "mpx", "on" }, 126 { "Icelake-Client" "-" TYPE_X86_CPU, "mpx", "on" }, 127 { "Icelake-Server" "-" TYPE_X86_CPU, "mpx", "on" }, 128 { "Cascadelake-Server" "-" TYPE_X86_CPU, "stepping", "5" }, 129 { TYPE_X86_CPU, "x-intel-pt-auto-level", "off" }, 130 }; 131 const size_t pc_compat_3_1_len = G_N_ELEMENTS(pc_compat_3_1); 132 133 GlobalProperty pc_compat_3_0[] = { 134 { TYPE_X86_CPU, "x-hv-synic-kvm-only", "on" }, 135 { "Skylake-Server" "-" TYPE_X86_CPU, "pku", "off" }, 136 { "Skylake-Server-IBRS" "-" TYPE_X86_CPU, "pku", "off" }, 137 }; 138 const size_t pc_compat_3_0_len = G_N_ELEMENTS(pc_compat_3_0); 139 140 GlobalProperty pc_compat_2_12[] = { 141 { TYPE_X86_CPU, "legacy-cache", "on" }, 142 { TYPE_X86_CPU, "topoext", "off" }, 143 { "EPYC-" TYPE_X86_CPU, "xlevel", "0x8000000a" }, 144 { "EPYC-IBPB-" TYPE_X86_CPU, "xlevel", "0x8000000a" }, 145 }; 146 const size_t pc_compat_2_12_len = G_N_ELEMENTS(pc_compat_2_12); 147 148 GlobalProperty pc_compat_2_11[] = { 149 { TYPE_X86_CPU, "x-migrate-smi-count", "off" }, 150 { "Skylake-Server" "-" TYPE_X86_CPU, "clflushopt", "off" }, 151 }; 152 const size_t pc_compat_2_11_len = G_N_ELEMENTS(pc_compat_2_11); 153 154 GlobalProperty pc_compat_2_10[] = { 155 { TYPE_X86_CPU, "x-hv-max-vps", "0x40" }, 156 { "i440FX-pcihost", "x-pci-hole64-fix", "off" }, 157 { "q35-pcihost", "x-pci-hole64-fix", "off" }, 158 }; 159 const size_t pc_compat_2_10_len = G_N_ELEMENTS(pc_compat_2_10); 160 161 GlobalProperty pc_compat_2_9[] = { 162 { "mch", "extended-tseg-mbytes", "0" }, 163 }; 164 const size_t pc_compat_2_9_len = G_N_ELEMENTS(pc_compat_2_9); 165 166 GlobalProperty pc_compat_2_8[] = { 167 { TYPE_X86_CPU, "tcg-cpuid", "off" }, 168 { "kvmclock", "x-mach-use-reliable-get-clock", "off" }, 169 { "ICH9-LPC", "x-smi-broadcast", "off" }, 170 { TYPE_X86_CPU, "vmware-cpuid-freq", "off" }, 171 { "Haswell-" TYPE_X86_CPU, "stepping", "1" }, 172 }; 173 const size_t pc_compat_2_8_len = G_N_ELEMENTS(pc_compat_2_8); 174 175 GlobalProperty pc_compat_2_7[] = { 176 { TYPE_X86_CPU, "l3-cache", "off" }, 177 { TYPE_X86_CPU, "full-cpuid-auto-level", "off" }, 178 { "Opteron_G3" "-" TYPE_X86_CPU, "family", "15" }, 179 { "Opteron_G3" "-" TYPE_X86_CPU, "model", "6" }, 180 { "Opteron_G3" "-" TYPE_X86_CPU, "stepping", "1" }, 181 { "isa-pcspk", "migrate", "off" }, 182 }; 183 const size_t pc_compat_2_7_len = G_N_ELEMENTS(pc_compat_2_7); 184 185 GlobalProperty pc_compat_2_6[] = { 186 { TYPE_X86_CPU, "cpuid-0xb", "off" }, 187 { "vmxnet3", "romfile", "" }, 188 { TYPE_X86_CPU, "fill-mtrr-mask", "off" }, 189 { "apic-common", "legacy-instance-id", "on", } 190 }; 191 const size_t pc_compat_2_6_len = G_N_ELEMENTS(pc_compat_2_6); 192 193 GlobalProperty pc_compat_2_5[] = {}; 194 const size_t pc_compat_2_5_len = G_N_ELEMENTS(pc_compat_2_5); 195 196 GlobalProperty pc_compat_2_4[] = { 197 PC_CPU_MODEL_IDS("2.4.0") 198 { "Haswell-" TYPE_X86_CPU, "abm", "off" }, 199 { "Haswell-noTSX-" TYPE_X86_CPU, "abm", "off" }, 200 { "Broadwell-" TYPE_X86_CPU, "abm", "off" }, 201 { "Broadwell-noTSX-" TYPE_X86_CPU, "abm", "off" }, 202 { "host" "-" TYPE_X86_CPU, "host-cache-info", "on" }, 203 { TYPE_X86_CPU, "check", "off" }, 204 { "qemu64" "-" TYPE_X86_CPU, "sse4a", "on" }, 205 { "qemu64" "-" TYPE_X86_CPU, "abm", "on" }, 206 { "qemu64" "-" TYPE_X86_CPU, "popcnt", "on" }, 207 { "qemu32" "-" TYPE_X86_CPU, "popcnt", "on" }, 208 { "Opteron_G2" "-" TYPE_X86_CPU, "rdtscp", "on" }, 209 { "Opteron_G3" "-" TYPE_X86_CPU, "rdtscp", "on" }, 210 { "Opteron_G4" "-" TYPE_X86_CPU, "rdtscp", "on" }, 211 { "Opteron_G5" "-" TYPE_X86_CPU, "rdtscp", "on", } 212 }; 213 const size_t pc_compat_2_4_len = G_N_ELEMENTS(pc_compat_2_4); 214 215 GlobalProperty pc_compat_2_3[] = { 216 PC_CPU_MODEL_IDS("2.3.0") 217 { TYPE_X86_CPU, "arat", "off" }, 218 { "qemu64" "-" TYPE_X86_CPU, "min-level", "4" }, 219 { "kvm64" "-" TYPE_X86_CPU, "min-level", "5" }, 220 { "pentium3" "-" TYPE_X86_CPU, "min-level", "2" }, 221 { "n270" "-" TYPE_X86_CPU, "min-level", "5" }, 222 { "Conroe" "-" TYPE_X86_CPU, "min-level", "4" }, 223 { "Penryn" "-" TYPE_X86_CPU, "min-level", "4" }, 224 { "Nehalem" "-" TYPE_X86_CPU, "min-level", "4" }, 225 { "n270" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 226 { "Penryn" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 227 { "Conroe" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 228 { "Nehalem" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 229 { "Westmere" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 230 { "SandyBridge" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 231 { "IvyBridge" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 232 { "Haswell" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 233 { "Haswell-noTSX" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 234 { "Broadwell" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 235 { "Broadwell-noTSX" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 236 { TYPE_X86_CPU, "kvm-no-smi-migration", "on" }, 237 }; 238 const size_t pc_compat_2_3_len = G_N_ELEMENTS(pc_compat_2_3); 239 240 GlobalProperty pc_compat_2_2[] = { 241 PC_CPU_MODEL_IDS("2.2.0") 242 { "kvm64" "-" TYPE_X86_CPU, "vme", "off" }, 243 { "kvm32" "-" TYPE_X86_CPU, "vme", "off" }, 244 { "Conroe" "-" TYPE_X86_CPU, "vme", "off" }, 245 { "Penryn" "-" TYPE_X86_CPU, "vme", "off" }, 246 { "Nehalem" "-" TYPE_X86_CPU, "vme", "off" }, 247 { "Westmere" "-" TYPE_X86_CPU, "vme", "off" }, 248 { "SandyBridge" "-" TYPE_X86_CPU, "vme", "off" }, 249 { "Haswell" "-" TYPE_X86_CPU, "vme", "off" }, 250 { "Broadwell" "-" TYPE_X86_CPU, "vme", "off" }, 251 { "Opteron_G1" "-" TYPE_X86_CPU, "vme", "off" }, 252 { "Opteron_G2" "-" TYPE_X86_CPU, "vme", "off" }, 253 { "Opteron_G3" "-" TYPE_X86_CPU, "vme", "off" }, 254 { "Opteron_G4" "-" TYPE_X86_CPU, "vme", "off" }, 255 { "Opteron_G5" "-" TYPE_X86_CPU, "vme", "off" }, 256 { "Haswell" "-" TYPE_X86_CPU, "f16c", "off" }, 257 { "Haswell" "-" TYPE_X86_CPU, "rdrand", "off" }, 258 { "Broadwell" "-" TYPE_X86_CPU, "f16c", "off" }, 259 { "Broadwell" "-" TYPE_X86_CPU, "rdrand", "off" }, 260 }; 261 const size_t pc_compat_2_2_len = G_N_ELEMENTS(pc_compat_2_2); 262 263 GlobalProperty pc_compat_2_1[] = { 264 PC_CPU_MODEL_IDS("2.1.0") 265 { "coreduo" "-" TYPE_X86_CPU, "vmx", "on" }, 266 { "core2duo" "-" TYPE_X86_CPU, "vmx", "on" }, 267 }; 268 const size_t pc_compat_2_1_len = G_N_ELEMENTS(pc_compat_2_1); 269 270 GlobalProperty pc_compat_2_0[] = { 271 PC_CPU_MODEL_IDS("2.0.0") 272 { "virtio-scsi-pci", "any_layout", "off" }, 273 { "PIIX4_PM", "memory-hotplug-support", "off" }, 274 { "apic", "version", "0x11" }, 275 { "nec-usb-xhci", "superspeed-ports-first", "off" }, 276 { "nec-usb-xhci", "force-pcie-endcap", "on" }, 277 { "pci-serial", "prog_if", "0" }, 278 { "pci-serial-2x", "prog_if", "0" }, 279 { "pci-serial-4x", "prog_if", "0" }, 280 { "virtio-net-pci", "guest_announce", "off" }, 281 { "ICH9-LPC", "memory-hotplug-support", "off" }, 282 { "xio3130-downstream", COMPAT_PROP_PCP, "off" }, 283 { "ioh3420", COMPAT_PROP_PCP, "off" }, 284 }; 285 const size_t pc_compat_2_0_len = G_N_ELEMENTS(pc_compat_2_0); 286 287 GlobalProperty pc_compat_1_7[] = { 288 PC_CPU_MODEL_IDS("1.7.0") 289 { TYPE_USB_DEVICE, "msos-desc", "no" }, 290 { "PIIX4_PM", "acpi-pci-hotplug-with-bridge-support", "off" }, 291 { "hpet", HPET_INTCAP, "4" }, 292 }; 293 const size_t pc_compat_1_7_len = G_N_ELEMENTS(pc_compat_1_7); 294 295 GlobalProperty pc_compat_1_6[] = { 296 PC_CPU_MODEL_IDS("1.6.0") 297 { "e1000", "mitigation", "off" }, 298 { "qemu64-" TYPE_X86_CPU, "model", "2" }, 299 { "qemu32-" TYPE_X86_CPU, "model", "3" }, 300 { "i440FX-pcihost", "short_root_bus", "1" }, 301 { "q35-pcihost", "short_root_bus", "1" }, 302 }; 303 const size_t pc_compat_1_6_len = G_N_ELEMENTS(pc_compat_1_6); 304 305 GlobalProperty pc_compat_1_5[] = { 306 PC_CPU_MODEL_IDS("1.5.0") 307 { "Conroe-" TYPE_X86_CPU, "model", "2" }, 308 { "Conroe-" TYPE_X86_CPU, "min-level", "2" }, 309 { "Penryn-" TYPE_X86_CPU, "model", "2" }, 310 { "Penryn-" TYPE_X86_CPU, "min-level", "2" }, 311 { "Nehalem-" TYPE_X86_CPU, "model", "2" }, 312 { "Nehalem-" TYPE_X86_CPU, "min-level", "2" }, 313 { "virtio-net-pci", "any_layout", "off" }, 314 { TYPE_X86_CPU, "pmu", "on" }, 315 { "i440FX-pcihost", "short_root_bus", "0" }, 316 { "q35-pcihost", "short_root_bus", "0" }, 317 }; 318 const size_t pc_compat_1_5_len = G_N_ELEMENTS(pc_compat_1_5); 319 320 GlobalProperty pc_compat_1_4[] = { 321 PC_CPU_MODEL_IDS("1.4.0") 322 { "scsi-hd", "discard_granularity", "0" }, 323 { "scsi-cd", "discard_granularity", "0" }, 324 { "scsi-disk", "discard_granularity", "0" }, 325 { "ide-hd", "discard_granularity", "0" }, 326 { "ide-cd", "discard_granularity", "0" }, 327 { "ide-drive", "discard_granularity", "0" }, 328 { "virtio-blk-pci", "discard_granularity", "0" }, 329 /* DEV_NVECTORS_UNSPECIFIED as a uint32_t string: */ 330 { "virtio-serial-pci", "vectors", "0xFFFFFFFF" }, 331 { "virtio-net-pci", "ctrl_guest_offloads", "off" }, 332 { "e1000", "romfile", "pxe-e1000.rom" }, 333 { "ne2k_pci", "romfile", "pxe-ne2k_pci.rom" }, 334 { "pcnet", "romfile", "pxe-pcnet.rom" }, 335 { "rtl8139", "romfile", "pxe-rtl8139.rom" }, 336 { "virtio-net-pci", "romfile", "pxe-virtio.rom" }, 337 { "486-" TYPE_X86_CPU, "model", "0" }, 338 { "n270" "-" TYPE_X86_CPU, "movbe", "off" }, 339 { "Westmere" "-" TYPE_X86_CPU, "pclmulqdq", "off" }, 340 }; 341 const size_t pc_compat_1_4_len = G_N_ELEMENTS(pc_compat_1_4); 342 343 GSIState *pc_gsi_create(qemu_irq **irqs, bool pci_enabled) 344 { 345 GSIState *s; 346 347 s = g_new0(GSIState, 1); 348 if (kvm_ioapic_in_kernel()) { 349 kvm_pc_setup_irq_routing(pci_enabled); 350 } 351 *irqs = qemu_allocate_irqs(gsi_handler, s, GSI_NUM_PINS); 352 353 return s; 354 } 355 356 static void ioport80_write(void *opaque, hwaddr addr, uint64_t data, 357 unsigned size) 358 { 359 } 360 361 static uint64_t ioport80_read(void *opaque, hwaddr addr, unsigned size) 362 { 363 return 0xffffffffffffffffULL; 364 } 365 366 /* MSDOS compatibility mode FPU exception support */ 367 static void ioportF0_write(void *opaque, hwaddr addr, uint64_t data, 368 unsigned size) 369 { 370 if (tcg_enabled()) { 371 cpu_set_ignne(); 372 } 373 } 374 375 static uint64_t ioportF0_read(void *opaque, hwaddr addr, unsigned size) 376 { 377 return 0xffffffffffffffffULL; 378 } 379 380 /* PC cmos mappings */ 381 382 #define REG_EQUIPMENT_BYTE 0x14 383 384 int cmos_get_fd_drive_type(FloppyDriveType fd0) 385 { 386 int val; 387 388 switch (fd0) { 389 case FLOPPY_DRIVE_TYPE_144: 390 /* 1.44 Mb 3"5 drive */ 391 val = 4; 392 break; 393 case FLOPPY_DRIVE_TYPE_288: 394 /* 2.88 Mb 3"5 drive */ 395 val = 5; 396 break; 397 case FLOPPY_DRIVE_TYPE_120: 398 /* 1.2 Mb 5"5 drive */ 399 val = 2; 400 break; 401 case FLOPPY_DRIVE_TYPE_NONE: 402 default: 403 val = 0; 404 break; 405 } 406 return val; 407 } 408 409 static void cmos_init_hd(ISADevice *s, int type_ofs, int info_ofs, 410 int16_t cylinders, int8_t heads, int8_t sectors) 411 { 412 rtc_set_memory(s, type_ofs, 47); 413 rtc_set_memory(s, info_ofs, cylinders); 414 rtc_set_memory(s, info_ofs + 1, cylinders >> 8); 415 rtc_set_memory(s, info_ofs + 2, heads); 416 rtc_set_memory(s, info_ofs + 3, 0xff); 417 rtc_set_memory(s, info_ofs + 4, 0xff); 418 rtc_set_memory(s, info_ofs + 5, 0xc0 | ((heads > 8) << 3)); 419 rtc_set_memory(s, info_ofs + 6, cylinders); 420 rtc_set_memory(s, info_ofs + 7, cylinders >> 8); 421 rtc_set_memory(s, info_ofs + 8, sectors); 422 } 423 424 /* convert boot_device letter to something recognizable by the bios */ 425 static int boot_device2nibble(char boot_device) 426 { 427 switch(boot_device) { 428 case 'a': 429 case 'b': 430 return 0x01; /* floppy boot */ 431 case 'c': 432 return 0x02; /* hard drive boot */ 433 case 'd': 434 return 0x03; /* CD-ROM boot */ 435 case 'n': 436 return 0x04; /* Network boot */ 437 } 438 return 0; 439 } 440 441 static void set_boot_dev(ISADevice *s, const char *boot_device, Error **errp) 442 { 443 #define PC_MAX_BOOT_DEVICES 3 444 int nbds, bds[3] = { 0, }; 445 int i; 446 447 nbds = strlen(boot_device); 448 if (nbds > PC_MAX_BOOT_DEVICES) { 449 error_setg(errp, "Too many boot devices for PC"); 450 return; 451 } 452 for (i = 0; i < nbds; i++) { 453 bds[i] = boot_device2nibble(boot_device[i]); 454 if (bds[i] == 0) { 455 error_setg(errp, "Invalid boot device for PC: '%c'", 456 boot_device[i]); 457 return; 458 } 459 } 460 rtc_set_memory(s, 0x3d, (bds[1] << 4) | bds[0]); 461 rtc_set_memory(s, 0x38, (bds[2] << 4) | (fd_bootchk ? 0x0 : 0x1)); 462 } 463 464 static void pc_boot_set(void *opaque, const char *boot_device, Error **errp) 465 { 466 set_boot_dev(opaque, boot_device, errp); 467 } 468 469 static void pc_cmos_init_floppy(ISADevice *rtc_state, ISADevice *floppy) 470 { 471 int val, nb, i; 472 FloppyDriveType fd_type[2] = { FLOPPY_DRIVE_TYPE_NONE, 473 FLOPPY_DRIVE_TYPE_NONE }; 474 475 /* floppy type */ 476 if (floppy) { 477 for (i = 0; i < 2; i++) { 478 fd_type[i] = isa_fdc_get_drive_type(floppy, i); 479 } 480 } 481 val = (cmos_get_fd_drive_type(fd_type[0]) << 4) | 482 cmos_get_fd_drive_type(fd_type[1]); 483 rtc_set_memory(rtc_state, 0x10, val); 484 485 val = rtc_get_memory(rtc_state, REG_EQUIPMENT_BYTE); 486 nb = 0; 487 if (fd_type[0] != FLOPPY_DRIVE_TYPE_NONE) { 488 nb++; 489 } 490 if (fd_type[1] != FLOPPY_DRIVE_TYPE_NONE) { 491 nb++; 492 } 493 switch (nb) { 494 case 0: 495 break; 496 case 1: 497 val |= 0x01; /* 1 drive, ready for boot */ 498 break; 499 case 2: 500 val |= 0x41; /* 2 drives, ready for boot */ 501 break; 502 } 503 rtc_set_memory(rtc_state, REG_EQUIPMENT_BYTE, val); 504 } 505 506 typedef struct pc_cmos_init_late_arg { 507 ISADevice *rtc_state; 508 BusState *idebus[2]; 509 } pc_cmos_init_late_arg; 510 511 typedef struct check_fdc_state { 512 ISADevice *floppy; 513 bool multiple; 514 } CheckFdcState; 515 516 static int check_fdc(Object *obj, void *opaque) 517 { 518 CheckFdcState *state = opaque; 519 Object *fdc; 520 uint32_t iobase; 521 Error *local_err = NULL; 522 523 fdc = object_dynamic_cast(obj, TYPE_ISA_FDC); 524 if (!fdc) { 525 return 0; 526 } 527 528 iobase = object_property_get_uint(obj, "iobase", &local_err); 529 if (local_err || iobase != 0x3f0) { 530 error_free(local_err); 531 return 0; 532 } 533 534 if (state->floppy) { 535 state->multiple = true; 536 } else { 537 state->floppy = ISA_DEVICE(obj); 538 } 539 return 0; 540 } 541 542 static const char * const fdc_container_path[] = { 543 "/unattached", "/peripheral", "/peripheral-anon" 544 }; 545 546 /* 547 * Locate the FDC at IO address 0x3f0, in order to configure the CMOS registers 548 * and ACPI objects. 549 */ 550 ISADevice *pc_find_fdc0(void) 551 { 552 int i; 553 Object *container; 554 CheckFdcState state = { 0 }; 555 556 for (i = 0; i < ARRAY_SIZE(fdc_container_path); i++) { 557 container = container_get(qdev_get_machine(), fdc_container_path[i]); 558 object_child_foreach(container, check_fdc, &state); 559 } 560 561 if (state.multiple) { 562 warn_report("multiple floppy disk controllers with " 563 "iobase=0x3f0 have been found"); 564 error_printf("the one being picked for CMOS setup might not reflect " 565 "your intent"); 566 } 567 568 return state.floppy; 569 } 570 571 static void pc_cmos_init_late(void *opaque) 572 { 573 pc_cmos_init_late_arg *arg = opaque; 574 ISADevice *s = arg->rtc_state; 575 int16_t cylinders; 576 int8_t heads, sectors; 577 int val; 578 int i, trans; 579 580 val = 0; 581 if (arg->idebus[0] && ide_get_geometry(arg->idebus[0], 0, 582 &cylinders, &heads, §ors) >= 0) { 583 cmos_init_hd(s, 0x19, 0x1b, cylinders, heads, sectors); 584 val |= 0xf0; 585 } 586 if (arg->idebus[0] && ide_get_geometry(arg->idebus[0], 1, 587 &cylinders, &heads, §ors) >= 0) { 588 cmos_init_hd(s, 0x1a, 0x24, cylinders, heads, sectors); 589 val |= 0x0f; 590 } 591 rtc_set_memory(s, 0x12, val); 592 593 val = 0; 594 for (i = 0; i < 4; i++) { 595 /* NOTE: ide_get_geometry() returns the physical 596 geometry. It is always such that: 1 <= sects <= 63, 1 597 <= heads <= 16, 1 <= cylinders <= 16383. The BIOS 598 geometry can be different if a translation is done. */ 599 if (arg->idebus[i / 2] && 600 ide_get_geometry(arg->idebus[i / 2], i % 2, 601 &cylinders, &heads, §ors) >= 0) { 602 trans = ide_get_bios_chs_trans(arg->idebus[i / 2], i % 2) - 1; 603 assert((trans & ~3) == 0); 604 val |= trans << (i * 2); 605 } 606 } 607 rtc_set_memory(s, 0x39, val); 608 609 pc_cmos_init_floppy(s, pc_find_fdc0()); 610 611 qemu_unregister_reset(pc_cmos_init_late, opaque); 612 } 613 614 void pc_cmos_init(PCMachineState *pcms, 615 BusState *idebus0, BusState *idebus1, 616 ISADevice *s) 617 { 618 int val; 619 static pc_cmos_init_late_arg arg; 620 X86MachineState *x86ms = X86_MACHINE(pcms); 621 622 /* various important CMOS locations needed by PC/Bochs bios */ 623 624 /* memory size */ 625 /* base memory (first MiB) */ 626 val = MIN(x86ms->below_4g_mem_size / KiB, 640); 627 rtc_set_memory(s, 0x15, val); 628 rtc_set_memory(s, 0x16, val >> 8); 629 /* extended memory (next 64MiB) */ 630 if (x86ms->below_4g_mem_size > 1 * MiB) { 631 val = (x86ms->below_4g_mem_size - 1 * MiB) / KiB; 632 } else { 633 val = 0; 634 } 635 if (val > 65535) 636 val = 65535; 637 rtc_set_memory(s, 0x17, val); 638 rtc_set_memory(s, 0x18, val >> 8); 639 rtc_set_memory(s, 0x30, val); 640 rtc_set_memory(s, 0x31, val >> 8); 641 /* memory between 16MiB and 4GiB */ 642 if (x86ms->below_4g_mem_size > 16 * MiB) { 643 val = (x86ms->below_4g_mem_size - 16 * MiB) / (64 * KiB); 644 } else { 645 val = 0; 646 } 647 if (val > 65535) 648 val = 65535; 649 rtc_set_memory(s, 0x34, val); 650 rtc_set_memory(s, 0x35, val >> 8); 651 /* memory above 4GiB */ 652 val = x86ms->above_4g_mem_size / 65536; 653 rtc_set_memory(s, 0x5b, val); 654 rtc_set_memory(s, 0x5c, val >> 8); 655 rtc_set_memory(s, 0x5d, val >> 16); 656 657 object_property_add_link(OBJECT(pcms), "rtc_state", 658 TYPE_ISA_DEVICE, 659 (Object **)&x86ms->rtc, 660 object_property_allow_set_link, 661 OBJ_PROP_LINK_STRONG, &error_abort); 662 object_property_set_link(OBJECT(pcms), OBJECT(s), 663 "rtc_state", &error_abort); 664 665 set_boot_dev(s, MACHINE(pcms)->boot_order, &error_fatal); 666 667 val = 0; 668 val |= 0x02; /* FPU is there */ 669 val |= 0x04; /* PS/2 mouse installed */ 670 rtc_set_memory(s, REG_EQUIPMENT_BYTE, val); 671 672 /* hard drives and FDC */ 673 arg.rtc_state = s; 674 arg.idebus[0] = idebus0; 675 arg.idebus[1] = idebus1; 676 qemu_register_reset(pc_cmos_init_late, &arg); 677 } 678 679 static void handle_a20_line_change(void *opaque, int irq, int level) 680 { 681 X86CPU *cpu = opaque; 682 683 /* XXX: send to all CPUs ? */ 684 /* XXX: add logic to handle multiple A20 line sources */ 685 x86_cpu_set_a20(cpu, level); 686 } 687 688 #define NE2000_NB_MAX 6 689 690 static const int ne2000_io[NE2000_NB_MAX] = { 0x300, 0x320, 0x340, 0x360, 691 0x280, 0x380 }; 692 static const int ne2000_irq[NE2000_NB_MAX] = { 9, 10, 11, 3, 4, 5 }; 693 694 void pc_init_ne2k_isa(ISABus *bus, NICInfo *nd) 695 { 696 static int nb_ne2k = 0; 697 698 if (nb_ne2k == NE2000_NB_MAX) 699 return; 700 isa_ne2000_init(bus, ne2000_io[nb_ne2k], 701 ne2000_irq[nb_ne2k], nd); 702 nb_ne2k++; 703 } 704 705 void pc_acpi_smi_interrupt(void *opaque, int irq, int level) 706 { 707 X86CPU *cpu = opaque; 708 709 if (level) { 710 cpu_interrupt(CPU(cpu), CPU_INTERRUPT_SMI); 711 } 712 } 713 714 /* 715 * This function is very similar to smp_parse() 716 * in hw/core/machine.c but includes CPU die support. 717 */ 718 void pc_smp_parse(MachineState *ms, QemuOpts *opts) 719 { 720 X86MachineState *x86ms = X86_MACHINE(ms); 721 722 if (opts) { 723 unsigned cpus = qemu_opt_get_number(opts, "cpus", 0); 724 unsigned sockets = qemu_opt_get_number(opts, "sockets", 0); 725 unsigned dies = qemu_opt_get_number(opts, "dies", 1); 726 unsigned cores = qemu_opt_get_number(opts, "cores", 0); 727 unsigned threads = qemu_opt_get_number(opts, "threads", 0); 728 729 /* compute missing values, prefer sockets over cores over threads */ 730 if (cpus == 0 || sockets == 0) { 731 cores = cores > 0 ? cores : 1; 732 threads = threads > 0 ? threads : 1; 733 if (cpus == 0) { 734 sockets = sockets > 0 ? sockets : 1; 735 cpus = cores * threads * dies * sockets; 736 } else { 737 ms->smp.max_cpus = 738 qemu_opt_get_number(opts, "maxcpus", cpus); 739 sockets = ms->smp.max_cpus / (cores * threads * dies); 740 } 741 } else if (cores == 0) { 742 threads = threads > 0 ? threads : 1; 743 cores = cpus / (sockets * dies * threads); 744 cores = cores > 0 ? cores : 1; 745 } else if (threads == 0) { 746 threads = cpus / (cores * dies * sockets); 747 threads = threads > 0 ? threads : 1; 748 } else if (sockets * dies * cores * threads < cpus) { 749 error_report("cpu topology: " 750 "sockets (%u) * dies (%u) * cores (%u) * threads (%u) < " 751 "smp_cpus (%u)", 752 sockets, dies, cores, threads, cpus); 753 exit(1); 754 } 755 756 ms->smp.max_cpus = 757 qemu_opt_get_number(opts, "maxcpus", cpus); 758 759 if (ms->smp.max_cpus < cpus) { 760 error_report("maxcpus must be equal to or greater than smp"); 761 exit(1); 762 } 763 764 if (sockets * dies * cores * threads > ms->smp.max_cpus) { 765 error_report("cpu topology: " 766 "sockets (%u) * dies (%u) * cores (%u) * threads (%u) > " 767 "maxcpus (%u)", 768 sockets, dies, cores, threads, 769 ms->smp.max_cpus); 770 exit(1); 771 } 772 773 if (sockets * dies * cores * threads != ms->smp.max_cpus) { 774 warn_report("Invalid CPU topology deprecated: " 775 "sockets (%u) * dies (%u) * cores (%u) * threads (%u) " 776 "!= maxcpus (%u)", 777 sockets, dies, cores, threads, 778 ms->smp.max_cpus); 779 } 780 781 ms->smp.cpus = cpus; 782 ms->smp.cores = cores; 783 ms->smp.threads = threads; 784 x86ms->smp_dies = dies; 785 } 786 787 if (ms->smp.cpus > 1) { 788 Error *blocker = NULL; 789 error_setg(&blocker, QERR_REPLAY_NOT_SUPPORTED, "smp"); 790 replay_add_blocker(blocker); 791 } 792 } 793 794 void pc_hot_add_cpu(MachineState *ms, const int64_t id, Error **errp) 795 { 796 X86MachineState *x86ms = X86_MACHINE(ms); 797 int64_t apic_id = x86_cpu_apic_id_from_index(x86ms, id); 798 Error *local_err = NULL; 799 800 if (id < 0) { 801 error_setg(errp, "Invalid CPU id: %" PRIi64, id); 802 return; 803 } 804 805 if (apic_id >= ACPI_CPU_HOTPLUG_ID_LIMIT) { 806 error_setg(errp, "Unable to add CPU: %" PRIi64 807 ", resulting APIC ID (%" PRIi64 ") is too large", 808 id, apic_id); 809 return; 810 } 811 812 813 x86_cpu_new(X86_MACHINE(ms), apic_id, &local_err); 814 if (local_err) { 815 error_propagate(errp, local_err); 816 return; 817 } 818 } 819 820 static void rtc_set_cpus_count(ISADevice *rtc, uint16_t cpus_count) 821 { 822 if (cpus_count > 0xff) { 823 /* If the number of CPUs can't be represented in 8 bits, the 824 * BIOS must use "FW_CFG_NB_CPUS". Set RTC field to 0 just 825 * to make old BIOSes fail more predictably. 826 */ 827 rtc_set_memory(rtc, 0x5f, 0); 828 } else { 829 rtc_set_memory(rtc, 0x5f, cpus_count - 1); 830 } 831 } 832 833 static 834 void pc_machine_done(Notifier *notifier, void *data) 835 { 836 PCMachineState *pcms = container_of(notifier, 837 PCMachineState, machine_done); 838 X86MachineState *x86ms = X86_MACHINE(pcms); 839 PCIBus *bus = pcms->bus; 840 841 /* set the number of CPUs */ 842 rtc_set_cpus_count(x86ms->rtc, x86ms->boot_cpus); 843 844 if (bus) { 845 int extra_hosts = 0; 846 847 QLIST_FOREACH(bus, &bus->child, sibling) { 848 /* look for expander root buses */ 849 if (pci_bus_is_root(bus)) { 850 extra_hosts++; 851 } 852 } 853 if (extra_hosts && x86ms->fw_cfg) { 854 uint64_t *val = g_malloc(sizeof(*val)); 855 *val = cpu_to_le64(extra_hosts); 856 fw_cfg_add_file(x86ms->fw_cfg, 857 "etc/extra-pci-roots", val, sizeof(*val)); 858 } 859 } 860 861 acpi_setup(); 862 if (x86ms->fw_cfg) { 863 fw_cfg_build_smbios(MACHINE(pcms), x86ms->fw_cfg); 864 fw_cfg_build_feature_control(MACHINE(pcms), x86ms->fw_cfg); 865 /* update FW_CFG_NB_CPUS to account for -device added CPUs */ 866 fw_cfg_modify_i16(x86ms->fw_cfg, FW_CFG_NB_CPUS, x86ms->boot_cpus); 867 } 868 869 if (x86ms->apic_id_limit > 255 && !xen_enabled()) { 870 IntelIOMMUState *iommu = INTEL_IOMMU_DEVICE(x86_iommu_get_default()); 871 872 if (!iommu || !x86_iommu_ir_supported(X86_IOMMU_DEVICE(iommu)) || 873 iommu->intr_eim != ON_OFF_AUTO_ON) { 874 error_report("current -smp configuration requires " 875 "Extended Interrupt Mode enabled. " 876 "You can add an IOMMU using: " 877 "-device intel-iommu,intremap=on,eim=on"); 878 exit(EXIT_FAILURE); 879 } 880 } 881 } 882 883 void pc_guest_info_init(PCMachineState *pcms) 884 { 885 int i; 886 MachineState *ms = MACHINE(pcms); 887 X86MachineState *x86ms = X86_MACHINE(pcms); 888 889 x86ms->apic_xrupt_override = kvm_allows_irq0_override(); 890 pcms->numa_nodes = ms->numa_state->num_nodes; 891 pcms->node_mem = g_malloc0(pcms->numa_nodes * 892 sizeof *pcms->node_mem); 893 for (i = 0; i < ms->numa_state->num_nodes; i++) { 894 pcms->node_mem[i] = ms->numa_state->nodes[i].node_mem; 895 } 896 897 pcms->machine_done.notify = pc_machine_done; 898 qemu_add_machine_init_done_notifier(&pcms->machine_done); 899 } 900 901 /* setup pci memory address space mapping into system address space */ 902 void pc_pci_as_mapping_init(Object *owner, MemoryRegion *system_memory, 903 MemoryRegion *pci_address_space) 904 { 905 /* Set to lower priority than RAM */ 906 memory_region_add_subregion_overlap(system_memory, 0x0, 907 pci_address_space, -1); 908 } 909 910 void xen_load_linux(PCMachineState *pcms) 911 { 912 int i; 913 FWCfgState *fw_cfg; 914 PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); 915 X86MachineState *x86ms = X86_MACHINE(pcms); 916 917 assert(MACHINE(pcms)->kernel_filename != NULL); 918 919 fw_cfg = fw_cfg_init_io(FW_CFG_IO_BASE); 920 fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, x86ms->boot_cpus); 921 rom_set_fw(fw_cfg); 922 923 x86_load_linux(x86ms, fw_cfg, pcmc->acpi_data_size, 924 pcmc->pvh_enabled, pcmc->linuxboot_dma_enabled); 925 for (i = 0; i < nb_option_roms; i++) { 926 assert(!strcmp(option_rom[i].name, "linuxboot.bin") || 927 !strcmp(option_rom[i].name, "linuxboot_dma.bin") || 928 !strcmp(option_rom[i].name, "pvh.bin") || 929 !strcmp(option_rom[i].name, "multiboot.bin")); 930 rom_add_option(option_rom[i].name, option_rom[i].bootindex); 931 } 932 x86ms->fw_cfg = fw_cfg; 933 } 934 935 void pc_memory_init(PCMachineState *pcms, 936 MemoryRegion *system_memory, 937 MemoryRegion *rom_memory, 938 MemoryRegion **ram_memory) 939 { 940 int linux_boot, i; 941 MemoryRegion *option_rom_mr; 942 MemoryRegion *ram_below_4g, *ram_above_4g; 943 FWCfgState *fw_cfg; 944 MachineState *machine = MACHINE(pcms); 945 MachineClass *mc = MACHINE_GET_CLASS(machine); 946 PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); 947 X86MachineState *x86ms = X86_MACHINE(pcms); 948 949 assert(machine->ram_size == x86ms->below_4g_mem_size + 950 x86ms->above_4g_mem_size); 951 952 linux_boot = (machine->kernel_filename != NULL); 953 954 /* 955 * Split single memory region and use aliases to address portions of it, 956 * done for backwards compatibility with older qemus. 957 */ 958 *ram_memory = machine->ram; 959 ram_below_4g = g_malloc(sizeof(*ram_below_4g)); 960 memory_region_init_alias(ram_below_4g, NULL, "ram-below-4g", machine->ram, 961 0, x86ms->below_4g_mem_size); 962 memory_region_add_subregion(system_memory, 0, ram_below_4g); 963 e820_add_entry(0, x86ms->below_4g_mem_size, E820_RAM); 964 if (x86ms->above_4g_mem_size > 0) { 965 ram_above_4g = g_malloc(sizeof(*ram_above_4g)); 966 memory_region_init_alias(ram_above_4g, NULL, "ram-above-4g", 967 machine->ram, 968 x86ms->below_4g_mem_size, 969 x86ms->above_4g_mem_size); 970 memory_region_add_subregion(system_memory, 0x100000000ULL, 971 ram_above_4g); 972 e820_add_entry(0x100000000ULL, x86ms->above_4g_mem_size, E820_RAM); 973 } 974 975 if (!pcmc->has_reserved_memory && 976 (machine->ram_slots || 977 (machine->maxram_size > machine->ram_size))) { 978 979 error_report("\"-memory 'slots|maxmem'\" is not supported by: %s", 980 mc->name); 981 exit(EXIT_FAILURE); 982 } 983 984 /* always allocate the device memory information */ 985 machine->device_memory = g_malloc0(sizeof(*machine->device_memory)); 986 987 /* initialize device memory address space */ 988 if (pcmc->has_reserved_memory && 989 (machine->ram_size < machine->maxram_size)) { 990 ram_addr_t device_mem_size = machine->maxram_size - machine->ram_size; 991 992 if (machine->ram_slots > ACPI_MAX_RAM_SLOTS) { 993 error_report("unsupported amount of memory slots: %"PRIu64, 994 machine->ram_slots); 995 exit(EXIT_FAILURE); 996 } 997 998 if (QEMU_ALIGN_UP(machine->maxram_size, 999 TARGET_PAGE_SIZE) != machine->maxram_size) { 1000 error_report("maximum memory size must by aligned to multiple of " 1001 "%d bytes", TARGET_PAGE_SIZE); 1002 exit(EXIT_FAILURE); 1003 } 1004 1005 machine->device_memory->base = 1006 ROUND_UP(0x100000000ULL + x86ms->above_4g_mem_size, 1 * GiB); 1007 1008 if (pcmc->enforce_aligned_dimm) { 1009 /* size device region assuming 1G page max alignment per slot */ 1010 device_mem_size += (1 * GiB) * machine->ram_slots; 1011 } 1012 1013 if ((machine->device_memory->base + device_mem_size) < 1014 device_mem_size) { 1015 error_report("unsupported amount of maximum memory: " RAM_ADDR_FMT, 1016 machine->maxram_size); 1017 exit(EXIT_FAILURE); 1018 } 1019 1020 memory_region_init(&machine->device_memory->mr, OBJECT(pcms), 1021 "device-memory", device_mem_size); 1022 memory_region_add_subregion(system_memory, machine->device_memory->base, 1023 &machine->device_memory->mr); 1024 } 1025 1026 /* Initialize PC system firmware */ 1027 pc_system_firmware_init(pcms, rom_memory); 1028 1029 option_rom_mr = g_malloc(sizeof(*option_rom_mr)); 1030 memory_region_init_ram(option_rom_mr, NULL, "pc.rom", PC_ROM_SIZE, 1031 &error_fatal); 1032 if (pcmc->pci_enabled) { 1033 memory_region_set_readonly(option_rom_mr, true); 1034 } 1035 memory_region_add_subregion_overlap(rom_memory, 1036 PC_ROM_MIN_VGA, 1037 option_rom_mr, 1038 1); 1039 1040 fw_cfg = fw_cfg_arch_create(machine, 1041 x86ms->boot_cpus, x86ms->apic_id_limit); 1042 1043 rom_set_fw(fw_cfg); 1044 1045 if (pcmc->has_reserved_memory && machine->device_memory->base) { 1046 uint64_t *val = g_malloc(sizeof(*val)); 1047 PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); 1048 uint64_t res_mem_end = machine->device_memory->base; 1049 1050 if (!pcmc->broken_reserved_end) { 1051 res_mem_end += memory_region_size(&machine->device_memory->mr); 1052 } 1053 *val = cpu_to_le64(ROUND_UP(res_mem_end, 1 * GiB)); 1054 fw_cfg_add_file(fw_cfg, "etc/reserved-memory-end", val, sizeof(*val)); 1055 } 1056 1057 if (linux_boot) { 1058 x86_load_linux(x86ms, fw_cfg, pcmc->acpi_data_size, 1059 pcmc->pvh_enabled, pcmc->linuxboot_dma_enabled); 1060 } 1061 1062 for (i = 0; i < nb_option_roms; i++) { 1063 rom_add_option(option_rom[i].name, option_rom[i].bootindex); 1064 } 1065 x86ms->fw_cfg = fw_cfg; 1066 1067 /* Init default IOAPIC address space */ 1068 x86ms->ioapic_as = &address_space_memory; 1069 1070 /* Init ACPI memory hotplug IO base address */ 1071 pcms->memhp_io_base = ACPI_MEMORY_HOTPLUG_BASE; 1072 } 1073 1074 /* 1075 * The 64bit pci hole starts after "above 4G RAM" and 1076 * potentially the space reserved for memory hotplug. 1077 */ 1078 uint64_t pc_pci_hole64_start(void) 1079 { 1080 PCMachineState *pcms = PC_MACHINE(qdev_get_machine()); 1081 PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); 1082 MachineState *ms = MACHINE(pcms); 1083 X86MachineState *x86ms = X86_MACHINE(pcms); 1084 uint64_t hole64_start = 0; 1085 1086 if (pcmc->has_reserved_memory && ms->device_memory->base) { 1087 hole64_start = ms->device_memory->base; 1088 if (!pcmc->broken_reserved_end) { 1089 hole64_start += memory_region_size(&ms->device_memory->mr); 1090 } 1091 } else { 1092 hole64_start = 0x100000000ULL + x86ms->above_4g_mem_size; 1093 } 1094 1095 return ROUND_UP(hole64_start, 1 * GiB); 1096 } 1097 1098 DeviceState *pc_vga_init(ISABus *isa_bus, PCIBus *pci_bus) 1099 { 1100 DeviceState *dev = NULL; 1101 1102 rom_set_order_override(FW_CFG_ORDER_OVERRIDE_VGA); 1103 if (pci_bus) { 1104 PCIDevice *pcidev = pci_vga_init(pci_bus); 1105 dev = pcidev ? &pcidev->qdev : NULL; 1106 } else if (isa_bus) { 1107 ISADevice *isadev = isa_vga_init(isa_bus); 1108 dev = isadev ? DEVICE(isadev) : NULL; 1109 } 1110 rom_reset_order_override(); 1111 return dev; 1112 } 1113 1114 static const MemoryRegionOps ioport80_io_ops = { 1115 .write = ioport80_write, 1116 .read = ioport80_read, 1117 .endianness = DEVICE_NATIVE_ENDIAN, 1118 .impl = { 1119 .min_access_size = 1, 1120 .max_access_size = 1, 1121 }, 1122 }; 1123 1124 static const MemoryRegionOps ioportF0_io_ops = { 1125 .write = ioportF0_write, 1126 .read = ioportF0_read, 1127 .endianness = DEVICE_NATIVE_ENDIAN, 1128 .impl = { 1129 .min_access_size = 1, 1130 .max_access_size = 1, 1131 }, 1132 }; 1133 1134 static void pc_superio_init(ISABus *isa_bus, bool create_fdctrl, bool no_vmport) 1135 { 1136 int i; 1137 DriveInfo *fd[MAX_FD]; 1138 qemu_irq *a20_line; 1139 ISADevice *i8042, *port92, *vmmouse; 1140 1141 serial_hds_isa_init(isa_bus, 0, MAX_ISA_SERIAL_PORTS); 1142 parallel_hds_isa_init(isa_bus, MAX_PARALLEL_PORTS); 1143 1144 for (i = 0; i < MAX_FD; i++) { 1145 fd[i] = drive_get(IF_FLOPPY, 0, i); 1146 create_fdctrl |= !!fd[i]; 1147 } 1148 if (create_fdctrl) { 1149 fdctrl_init_isa(isa_bus, fd); 1150 } 1151 1152 i8042 = isa_create_simple(isa_bus, "i8042"); 1153 if (!no_vmport) { 1154 vmport_init(isa_bus); 1155 vmmouse = isa_try_create(isa_bus, "vmmouse"); 1156 } else { 1157 vmmouse = NULL; 1158 } 1159 if (vmmouse) { 1160 object_property_set_link(OBJECT(vmmouse), OBJECT(i8042), 1161 "i8042", &error_abort); 1162 qdev_init_nofail(DEVICE(vmmouse)); 1163 } 1164 port92 = isa_create_simple(isa_bus, TYPE_PORT92); 1165 1166 a20_line = qemu_allocate_irqs(handle_a20_line_change, first_cpu, 2); 1167 i8042_setup_a20_line(i8042, a20_line[0]); 1168 qdev_connect_gpio_out_named(DEVICE(port92), 1169 PORT92_A20_LINE, 0, a20_line[1]); 1170 g_free(a20_line); 1171 } 1172 1173 void pc_basic_device_init(ISABus *isa_bus, qemu_irq *gsi, 1174 ISADevice **rtc_state, 1175 bool create_fdctrl, 1176 bool no_vmport, 1177 bool has_pit, 1178 uint32_t hpet_irqs) 1179 { 1180 int i; 1181 DeviceState *hpet = NULL; 1182 int pit_isa_irq = 0; 1183 qemu_irq pit_alt_irq = NULL; 1184 qemu_irq rtc_irq = NULL; 1185 ISADevice *pit = NULL; 1186 MemoryRegion *ioport80_io = g_new(MemoryRegion, 1); 1187 MemoryRegion *ioportF0_io = g_new(MemoryRegion, 1); 1188 1189 memory_region_init_io(ioport80_io, NULL, &ioport80_io_ops, NULL, "ioport80", 1); 1190 memory_region_add_subregion(isa_bus->address_space_io, 0x80, ioport80_io); 1191 1192 memory_region_init_io(ioportF0_io, NULL, &ioportF0_io_ops, NULL, "ioportF0", 1); 1193 memory_region_add_subregion(isa_bus->address_space_io, 0xf0, ioportF0_io); 1194 1195 /* 1196 * Check if an HPET shall be created. 1197 * 1198 * Without KVM_CAP_PIT_STATE2, we cannot switch off the in-kernel PIT 1199 * when the HPET wants to take over. Thus we have to disable the latter. 1200 */ 1201 if (!no_hpet && (!kvm_irqchip_in_kernel() || kvm_has_pit_state2())) { 1202 hpet = qdev_try_create(NULL, TYPE_HPET); 1203 if (hpet) { 1204 /* For pc-piix-*, hpet's intcap is always IRQ2. For pc-q35-1.7 1205 * and earlier, use IRQ2 for compat. Otherwise, use IRQ16~23, 1206 * IRQ8 and IRQ2. 1207 */ 1208 uint8_t compat = object_property_get_uint(OBJECT(hpet), 1209 HPET_INTCAP, NULL); 1210 if (!compat) { 1211 qdev_prop_set_uint32(hpet, HPET_INTCAP, hpet_irqs); 1212 } 1213 qdev_init_nofail(hpet); 1214 sysbus_mmio_map(SYS_BUS_DEVICE(hpet), 0, HPET_BASE); 1215 1216 for (i = 0; i < GSI_NUM_PINS; i++) { 1217 sysbus_connect_irq(SYS_BUS_DEVICE(hpet), i, gsi[i]); 1218 } 1219 pit_isa_irq = -1; 1220 pit_alt_irq = qdev_get_gpio_in(hpet, HPET_LEGACY_PIT_INT); 1221 rtc_irq = qdev_get_gpio_in(hpet, HPET_LEGACY_RTC_INT); 1222 } 1223 } 1224 *rtc_state = mc146818_rtc_init(isa_bus, 2000, rtc_irq); 1225 1226 qemu_register_boot_set(pc_boot_set, *rtc_state); 1227 1228 if (!xen_enabled() && has_pit) { 1229 if (kvm_pit_in_kernel()) { 1230 pit = kvm_pit_init(isa_bus, 0x40); 1231 } else { 1232 pit = i8254_pit_init(isa_bus, 0x40, pit_isa_irq, pit_alt_irq); 1233 } 1234 if (hpet) { 1235 /* connect PIT to output control line of the HPET */ 1236 qdev_connect_gpio_out(hpet, 0, qdev_get_gpio_in(DEVICE(pit), 0)); 1237 } 1238 pcspk_init(isa_bus, pit); 1239 } 1240 1241 i8257_dma_init(isa_bus, 0); 1242 1243 /* Super I/O */ 1244 pc_superio_init(isa_bus, create_fdctrl, no_vmport); 1245 } 1246 1247 void pc_nic_init(PCMachineClass *pcmc, ISABus *isa_bus, PCIBus *pci_bus) 1248 { 1249 int i; 1250 1251 rom_set_order_override(FW_CFG_ORDER_OVERRIDE_NIC); 1252 for (i = 0; i < nb_nics; i++) { 1253 NICInfo *nd = &nd_table[i]; 1254 const char *model = nd->model ? nd->model : pcmc->default_nic_model; 1255 1256 if (g_str_equal(model, "ne2k_isa")) { 1257 pc_init_ne2k_isa(isa_bus, nd); 1258 } else { 1259 pci_nic_init_nofail(nd, pci_bus, model, NULL); 1260 } 1261 } 1262 rom_reset_order_override(); 1263 } 1264 1265 void pc_i8259_create(ISABus *isa_bus, qemu_irq *i8259_irqs) 1266 { 1267 qemu_irq *i8259; 1268 1269 if (kvm_pic_in_kernel()) { 1270 i8259 = kvm_i8259_init(isa_bus); 1271 } else if (xen_enabled()) { 1272 i8259 = xen_interrupt_controller_init(); 1273 } else { 1274 i8259 = i8259_init(isa_bus, x86_allocate_cpu_irq()); 1275 } 1276 1277 for (size_t i = 0; i < ISA_NUM_IRQS; i++) { 1278 i8259_irqs[i] = i8259[i]; 1279 } 1280 1281 g_free(i8259); 1282 } 1283 1284 static void pc_memory_pre_plug(HotplugHandler *hotplug_dev, DeviceState *dev, 1285 Error **errp) 1286 { 1287 const PCMachineState *pcms = PC_MACHINE(hotplug_dev); 1288 const PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); 1289 const MachineState *ms = MACHINE(hotplug_dev); 1290 const bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM); 1291 const uint64_t legacy_align = TARGET_PAGE_SIZE; 1292 Error *local_err = NULL; 1293 1294 /* 1295 * When -no-acpi is used with Q35 machine type, no ACPI is built, 1296 * but pcms->acpi_dev is still created. Check !acpi_enabled in 1297 * addition to cover this case. 1298 */ 1299 if (!pcms->acpi_dev || !acpi_enabled) { 1300 error_setg(errp, 1301 "memory hotplug is not enabled: missing acpi device or acpi disabled"); 1302 return; 1303 } 1304 1305 if (is_nvdimm && !ms->nvdimms_state->is_enabled) { 1306 error_setg(errp, "nvdimm is not enabled: missing 'nvdimm' in '-M'"); 1307 return; 1308 } 1309 1310 hotplug_handler_pre_plug(pcms->acpi_dev, dev, &local_err); 1311 if (local_err) { 1312 error_propagate(errp, local_err); 1313 return; 1314 } 1315 1316 pc_dimm_pre_plug(PC_DIMM(dev), MACHINE(hotplug_dev), 1317 pcmc->enforce_aligned_dimm ? NULL : &legacy_align, errp); 1318 } 1319 1320 static void pc_memory_plug(HotplugHandler *hotplug_dev, 1321 DeviceState *dev, Error **errp) 1322 { 1323 Error *local_err = NULL; 1324 PCMachineState *pcms = PC_MACHINE(hotplug_dev); 1325 MachineState *ms = MACHINE(hotplug_dev); 1326 bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM); 1327 1328 pc_dimm_plug(PC_DIMM(dev), MACHINE(pcms), &local_err); 1329 if (local_err) { 1330 goto out; 1331 } 1332 1333 if (is_nvdimm) { 1334 nvdimm_plug(ms->nvdimms_state); 1335 } 1336 1337 hotplug_handler_plug(HOTPLUG_HANDLER(pcms->acpi_dev), dev, &error_abort); 1338 out: 1339 error_propagate(errp, local_err); 1340 } 1341 1342 static void pc_memory_unplug_request(HotplugHandler *hotplug_dev, 1343 DeviceState *dev, Error **errp) 1344 { 1345 Error *local_err = NULL; 1346 PCMachineState *pcms = PC_MACHINE(hotplug_dev); 1347 1348 /* 1349 * When -no-acpi is used with Q35 machine type, no ACPI is built, 1350 * but pcms->acpi_dev is still created. Check !acpi_enabled in 1351 * addition to cover this case. 1352 */ 1353 if (!pcms->acpi_dev || !acpi_enabled) { 1354 error_setg(&local_err, 1355 "memory hotplug is not enabled: missing acpi device or acpi disabled"); 1356 goto out; 1357 } 1358 1359 if (object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM)) { 1360 error_setg(&local_err, 1361 "nvdimm device hot unplug is not supported yet."); 1362 goto out; 1363 } 1364 1365 hotplug_handler_unplug_request(HOTPLUG_HANDLER(pcms->acpi_dev), dev, 1366 &local_err); 1367 out: 1368 error_propagate(errp, local_err); 1369 } 1370 1371 static void pc_memory_unplug(HotplugHandler *hotplug_dev, 1372 DeviceState *dev, Error **errp) 1373 { 1374 PCMachineState *pcms = PC_MACHINE(hotplug_dev); 1375 Error *local_err = NULL; 1376 1377 hotplug_handler_unplug(HOTPLUG_HANDLER(pcms->acpi_dev), dev, &local_err); 1378 if (local_err) { 1379 goto out; 1380 } 1381 1382 pc_dimm_unplug(PC_DIMM(dev), MACHINE(pcms)); 1383 object_property_set_bool(OBJECT(dev), false, "realized", NULL); 1384 out: 1385 error_propagate(errp, local_err); 1386 } 1387 1388 static int pc_apic_cmp(const void *a, const void *b) 1389 { 1390 CPUArchId *apic_a = (CPUArchId *)a; 1391 CPUArchId *apic_b = (CPUArchId *)b; 1392 1393 return apic_a->arch_id - apic_b->arch_id; 1394 } 1395 1396 /* returns pointer to CPUArchId descriptor that matches CPU's apic_id 1397 * in ms->possible_cpus->cpus, if ms->possible_cpus->cpus has no 1398 * entry corresponding to CPU's apic_id returns NULL. 1399 */ 1400 static CPUArchId *pc_find_cpu_slot(MachineState *ms, uint32_t id, int *idx) 1401 { 1402 CPUArchId apic_id, *found_cpu; 1403 1404 apic_id.arch_id = id; 1405 found_cpu = bsearch(&apic_id, ms->possible_cpus->cpus, 1406 ms->possible_cpus->len, sizeof(*ms->possible_cpus->cpus), 1407 pc_apic_cmp); 1408 if (found_cpu && idx) { 1409 *idx = found_cpu - ms->possible_cpus->cpus; 1410 } 1411 return found_cpu; 1412 } 1413 1414 static void pc_cpu_plug(HotplugHandler *hotplug_dev, 1415 DeviceState *dev, Error **errp) 1416 { 1417 CPUArchId *found_cpu; 1418 Error *local_err = NULL; 1419 X86CPU *cpu = X86_CPU(dev); 1420 PCMachineState *pcms = PC_MACHINE(hotplug_dev); 1421 X86MachineState *x86ms = X86_MACHINE(pcms); 1422 1423 if (pcms->acpi_dev) { 1424 hotplug_handler_plug(HOTPLUG_HANDLER(pcms->acpi_dev), dev, &local_err); 1425 if (local_err) { 1426 goto out; 1427 } 1428 } 1429 1430 /* increment the number of CPUs */ 1431 x86ms->boot_cpus++; 1432 if (x86ms->rtc) { 1433 rtc_set_cpus_count(x86ms->rtc, x86ms->boot_cpus); 1434 } 1435 if (x86ms->fw_cfg) { 1436 fw_cfg_modify_i16(x86ms->fw_cfg, FW_CFG_NB_CPUS, x86ms->boot_cpus); 1437 } 1438 1439 found_cpu = pc_find_cpu_slot(MACHINE(pcms), cpu->apic_id, NULL); 1440 found_cpu->cpu = OBJECT(dev); 1441 out: 1442 error_propagate(errp, local_err); 1443 } 1444 static void pc_cpu_unplug_request_cb(HotplugHandler *hotplug_dev, 1445 DeviceState *dev, Error **errp) 1446 { 1447 int idx = -1; 1448 Error *local_err = NULL; 1449 X86CPU *cpu = X86_CPU(dev); 1450 PCMachineState *pcms = PC_MACHINE(hotplug_dev); 1451 1452 if (!pcms->acpi_dev) { 1453 error_setg(&local_err, "CPU hot unplug not supported without ACPI"); 1454 goto out; 1455 } 1456 1457 pc_find_cpu_slot(MACHINE(pcms), cpu->apic_id, &idx); 1458 assert(idx != -1); 1459 if (idx == 0) { 1460 error_setg(&local_err, "Boot CPU is unpluggable"); 1461 goto out; 1462 } 1463 1464 hotplug_handler_unplug_request(HOTPLUG_HANDLER(pcms->acpi_dev), dev, 1465 &local_err); 1466 if (local_err) { 1467 goto out; 1468 } 1469 1470 out: 1471 error_propagate(errp, local_err); 1472 1473 } 1474 1475 static void pc_cpu_unplug_cb(HotplugHandler *hotplug_dev, 1476 DeviceState *dev, Error **errp) 1477 { 1478 CPUArchId *found_cpu; 1479 Error *local_err = NULL; 1480 X86CPU *cpu = X86_CPU(dev); 1481 PCMachineState *pcms = PC_MACHINE(hotplug_dev); 1482 X86MachineState *x86ms = X86_MACHINE(pcms); 1483 1484 hotplug_handler_unplug(HOTPLUG_HANDLER(pcms->acpi_dev), dev, &local_err); 1485 if (local_err) { 1486 goto out; 1487 } 1488 1489 found_cpu = pc_find_cpu_slot(MACHINE(pcms), cpu->apic_id, NULL); 1490 found_cpu->cpu = NULL; 1491 object_property_set_bool(OBJECT(dev), false, "realized", NULL); 1492 1493 /* decrement the number of CPUs */ 1494 x86ms->boot_cpus--; 1495 /* Update the number of CPUs in CMOS */ 1496 rtc_set_cpus_count(x86ms->rtc, x86ms->boot_cpus); 1497 fw_cfg_modify_i16(x86ms->fw_cfg, FW_CFG_NB_CPUS, x86ms->boot_cpus); 1498 out: 1499 error_propagate(errp, local_err); 1500 } 1501 1502 static void pc_cpu_pre_plug(HotplugHandler *hotplug_dev, 1503 DeviceState *dev, Error **errp) 1504 { 1505 int idx; 1506 CPUState *cs; 1507 CPUArchId *cpu_slot; 1508 X86CPUTopoIDs topo_ids; 1509 X86CPU *cpu = X86_CPU(dev); 1510 CPUX86State *env = &cpu->env; 1511 MachineState *ms = MACHINE(hotplug_dev); 1512 PCMachineState *pcms = PC_MACHINE(hotplug_dev); 1513 X86MachineState *x86ms = X86_MACHINE(pcms); 1514 unsigned int smp_cores = ms->smp.cores; 1515 unsigned int smp_threads = ms->smp.threads; 1516 1517 if(!object_dynamic_cast(OBJECT(cpu), ms->cpu_type)) { 1518 error_setg(errp, "Invalid CPU type, expected cpu type: '%s'", 1519 ms->cpu_type); 1520 return; 1521 } 1522 1523 env->nr_dies = x86ms->smp_dies; 1524 1525 /* 1526 * If APIC ID is not set, 1527 * set it based on socket/die/core/thread properties. 1528 */ 1529 if (cpu->apic_id == UNASSIGNED_APIC_ID) { 1530 int max_socket = (ms->smp.max_cpus - 1) / 1531 smp_threads / smp_cores / x86ms->smp_dies; 1532 1533 /* 1534 * die-id was optional in QEMU 4.0 and older, so keep it optional 1535 * if there's only one die per socket. 1536 */ 1537 if (cpu->die_id < 0 && x86ms->smp_dies == 1) { 1538 cpu->die_id = 0; 1539 } 1540 1541 if (cpu->socket_id < 0) { 1542 error_setg(errp, "CPU socket-id is not set"); 1543 return; 1544 } else if (cpu->socket_id > max_socket) { 1545 error_setg(errp, "Invalid CPU socket-id: %u must be in range 0:%u", 1546 cpu->socket_id, max_socket); 1547 return; 1548 } 1549 if (cpu->die_id < 0) { 1550 error_setg(errp, "CPU die-id is not set"); 1551 return; 1552 } else if (cpu->die_id > x86ms->smp_dies - 1) { 1553 error_setg(errp, "Invalid CPU die-id: %u must be in range 0:%u", 1554 cpu->die_id, x86ms->smp_dies - 1); 1555 return; 1556 } 1557 if (cpu->core_id < 0) { 1558 error_setg(errp, "CPU core-id is not set"); 1559 return; 1560 } else if (cpu->core_id > (smp_cores - 1)) { 1561 error_setg(errp, "Invalid CPU core-id: %u must be in range 0:%u", 1562 cpu->core_id, smp_cores - 1); 1563 return; 1564 } 1565 if (cpu->thread_id < 0) { 1566 error_setg(errp, "CPU thread-id is not set"); 1567 return; 1568 } else if (cpu->thread_id > (smp_threads - 1)) { 1569 error_setg(errp, "Invalid CPU thread-id: %u must be in range 0:%u", 1570 cpu->thread_id, smp_threads - 1); 1571 return; 1572 } 1573 1574 topo_ids.pkg_id = cpu->socket_id; 1575 topo_ids.die_id = cpu->die_id; 1576 topo_ids.core_id = cpu->core_id; 1577 topo_ids.smt_id = cpu->thread_id; 1578 cpu->apic_id = apicid_from_topo_ids(x86ms->smp_dies, smp_cores, 1579 smp_threads, &topo_ids); 1580 } 1581 1582 cpu_slot = pc_find_cpu_slot(MACHINE(pcms), cpu->apic_id, &idx); 1583 if (!cpu_slot) { 1584 MachineState *ms = MACHINE(pcms); 1585 1586 x86_topo_ids_from_apicid(cpu->apic_id, x86ms->smp_dies, 1587 smp_cores, smp_threads, &topo_ids); 1588 error_setg(errp, 1589 "Invalid CPU [socket: %u, die: %u, core: %u, thread: %u] with" 1590 " APIC ID %" PRIu32 ", valid index range 0:%d", 1591 topo_ids.pkg_id, topo_ids.die_id, topo_ids.core_id, topo_ids.smt_id, 1592 cpu->apic_id, ms->possible_cpus->len - 1); 1593 return; 1594 } 1595 1596 if (cpu_slot->cpu) { 1597 error_setg(errp, "CPU[%d] with APIC ID %" PRIu32 " exists", 1598 idx, cpu->apic_id); 1599 return; 1600 } 1601 1602 /* if 'address' properties socket-id/core-id/thread-id are not set, set them 1603 * so that machine_query_hotpluggable_cpus would show correct values 1604 */ 1605 /* TODO: move socket_id/core_id/thread_id checks into x86_cpu_realizefn() 1606 * once -smp refactoring is complete and there will be CPU private 1607 * CPUState::nr_cores and CPUState::nr_threads fields instead of globals */ 1608 x86_topo_ids_from_apicid(cpu->apic_id, x86ms->smp_dies, 1609 smp_cores, smp_threads, &topo_ids); 1610 if (cpu->socket_id != -1 && cpu->socket_id != topo_ids.pkg_id) { 1611 error_setg(errp, "property socket-id: %u doesn't match set apic-id:" 1612 " 0x%x (socket-id: %u)", cpu->socket_id, cpu->apic_id, 1613 topo_ids.pkg_id); 1614 return; 1615 } 1616 cpu->socket_id = topo_ids.pkg_id; 1617 1618 if (cpu->die_id != -1 && cpu->die_id != topo_ids.die_id) { 1619 error_setg(errp, "property die-id: %u doesn't match set apic-id:" 1620 " 0x%x (die-id: %u)", cpu->die_id, cpu->apic_id, topo_ids.die_id); 1621 return; 1622 } 1623 cpu->die_id = topo_ids.die_id; 1624 1625 if (cpu->core_id != -1 && cpu->core_id != topo_ids.core_id) { 1626 error_setg(errp, "property core-id: %u doesn't match set apic-id:" 1627 " 0x%x (core-id: %u)", cpu->core_id, cpu->apic_id, 1628 topo_ids.core_id); 1629 return; 1630 } 1631 cpu->core_id = topo_ids.core_id; 1632 1633 if (cpu->thread_id != -1 && cpu->thread_id != topo_ids.smt_id) { 1634 error_setg(errp, "property thread-id: %u doesn't match set apic-id:" 1635 " 0x%x (thread-id: %u)", cpu->thread_id, cpu->apic_id, 1636 topo_ids.smt_id); 1637 return; 1638 } 1639 cpu->thread_id = topo_ids.smt_id; 1640 1641 if (hyperv_feat_enabled(cpu, HYPERV_FEAT_VPINDEX) && 1642 !kvm_hv_vpindex_settable()) { 1643 error_setg(errp, "kernel doesn't allow setting HyperV VP_INDEX"); 1644 return; 1645 } 1646 1647 cs = CPU(cpu); 1648 cs->cpu_index = idx; 1649 1650 numa_cpu_pre_plug(cpu_slot, dev, errp); 1651 } 1652 1653 static void pc_virtio_pmem_pci_pre_plug(HotplugHandler *hotplug_dev, 1654 DeviceState *dev, Error **errp) 1655 { 1656 HotplugHandler *hotplug_dev2 = qdev_get_bus_hotplug_handler(dev); 1657 Error *local_err = NULL; 1658 1659 if (!hotplug_dev2) { 1660 /* 1661 * Without a bus hotplug handler, we cannot control the plug/unplug 1662 * order. This should never be the case on x86, however better add 1663 * a safety net. 1664 */ 1665 error_setg(errp, "virtio-pmem-pci not supported on this bus."); 1666 return; 1667 } 1668 /* 1669 * First, see if we can plug this memory device at all. If that 1670 * succeeds, branch of to the actual hotplug handler. 1671 */ 1672 memory_device_pre_plug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev), NULL, 1673 &local_err); 1674 if (!local_err) { 1675 hotplug_handler_pre_plug(hotplug_dev2, dev, &local_err); 1676 } 1677 error_propagate(errp, local_err); 1678 } 1679 1680 static void pc_virtio_pmem_pci_plug(HotplugHandler *hotplug_dev, 1681 DeviceState *dev, Error **errp) 1682 { 1683 HotplugHandler *hotplug_dev2 = qdev_get_bus_hotplug_handler(dev); 1684 Error *local_err = NULL; 1685 1686 /* 1687 * Plug the memory device first and then branch off to the actual 1688 * hotplug handler. If that one fails, we can easily undo the memory 1689 * device bits. 1690 */ 1691 memory_device_plug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev)); 1692 hotplug_handler_plug(hotplug_dev2, dev, &local_err); 1693 if (local_err) { 1694 memory_device_unplug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev)); 1695 } 1696 error_propagate(errp, local_err); 1697 } 1698 1699 static void pc_virtio_pmem_pci_unplug_request(HotplugHandler *hotplug_dev, 1700 DeviceState *dev, Error **errp) 1701 { 1702 /* We don't support virtio pmem hot unplug */ 1703 error_setg(errp, "virtio pmem device unplug not supported."); 1704 } 1705 1706 static void pc_virtio_pmem_pci_unplug(HotplugHandler *hotplug_dev, 1707 DeviceState *dev, Error **errp) 1708 { 1709 /* We don't support virtio pmem hot unplug */ 1710 } 1711 1712 static void pc_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev, 1713 DeviceState *dev, Error **errp) 1714 { 1715 if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { 1716 pc_memory_pre_plug(hotplug_dev, dev, errp); 1717 } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { 1718 pc_cpu_pre_plug(hotplug_dev, dev, errp); 1719 } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI)) { 1720 pc_virtio_pmem_pci_pre_plug(hotplug_dev, dev, errp); 1721 } 1722 } 1723 1724 static void pc_machine_device_plug_cb(HotplugHandler *hotplug_dev, 1725 DeviceState *dev, Error **errp) 1726 { 1727 if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { 1728 pc_memory_plug(hotplug_dev, dev, errp); 1729 } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { 1730 pc_cpu_plug(hotplug_dev, dev, errp); 1731 } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI)) { 1732 pc_virtio_pmem_pci_plug(hotplug_dev, dev, errp); 1733 } 1734 } 1735 1736 static void pc_machine_device_unplug_request_cb(HotplugHandler *hotplug_dev, 1737 DeviceState *dev, Error **errp) 1738 { 1739 if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { 1740 pc_memory_unplug_request(hotplug_dev, dev, errp); 1741 } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { 1742 pc_cpu_unplug_request_cb(hotplug_dev, dev, errp); 1743 } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI)) { 1744 pc_virtio_pmem_pci_unplug_request(hotplug_dev, dev, errp); 1745 } else { 1746 error_setg(errp, "acpi: device unplug request for not supported device" 1747 " type: %s", object_get_typename(OBJECT(dev))); 1748 } 1749 } 1750 1751 static void pc_machine_device_unplug_cb(HotplugHandler *hotplug_dev, 1752 DeviceState *dev, Error **errp) 1753 { 1754 if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { 1755 pc_memory_unplug(hotplug_dev, dev, errp); 1756 } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { 1757 pc_cpu_unplug_cb(hotplug_dev, dev, errp); 1758 } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI)) { 1759 pc_virtio_pmem_pci_unplug(hotplug_dev, dev, errp); 1760 } else { 1761 error_setg(errp, "acpi: device unplug for not supported device" 1762 " type: %s", object_get_typename(OBJECT(dev))); 1763 } 1764 } 1765 1766 static HotplugHandler *pc_get_hotplug_handler(MachineState *machine, 1767 DeviceState *dev) 1768 { 1769 if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM) || 1770 object_dynamic_cast(OBJECT(dev), TYPE_CPU) || 1771 object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI)) { 1772 return HOTPLUG_HANDLER(machine); 1773 } 1774 1775 return NULL; 1776 } 1777 1778 static void 1779 pc_machine_get_device_memory_region_size(Object *obj, Visitor *v, 1780 const char *name, void *opaque, 1781 Error **errp) 1782 { 1783 MachineState *ms = MACHINE(obj); 1784 int64_t value = 0; 1785 1786 if (ms->device_memory) { 1787 value = memory_region_size(&ms->device_memory->mr); 1788 } 1789 1790 visit_type_int(v, name, &value, errp); 1791 } 1792 1793 static void pc_machine_get_vmport(Object *obj, Visitor *v, const char *name, 1794 void *opaque, Error **errp) 1795 { 1796 PCMachineState *pcms = PC_MACHINE(obj); 1797 OnOffAuto vmport = pcms->vmport; 1798 1799 visit_type_OnOffAuto(v, name, &vmport, errp); 1800 } 1801 1802 static void pc_machine_set_vmport(Object *obj, Visitor *v, const char *name, 1803 void *opaque, Error **errp) 1804 { 1805 PCMachineState *pcms = PC_MACHINE(obj); 1806 1807 visit_type_OnOffAuto(v, name, &pcms->vmport, errp); 1808 } 1809 1810 static bool pc_machine_get_smbus(Object *obj, Error **errp) 1811 { 1812 PCMachineState *pcms = PC_MACHINE(obj); 1813 1814 return pcms->smbus_enabled; 1815 } 1816 1817 static void pc_machine_set_smbus(Object *obj, bool value, Error **errp) 1818 { 1819 PCMachineState *pcms = PC_MACHINE(obj); 1820 1821 pcms->smbus_enabled = value; 1822 } 1823 1824 static bool pc_machine_get_sata(Object *obj, Error **errp) 1825 { 1826 PCMachineState *pcms = PC_MACHINE(obj); 1827 1828 return pcms->sata_enabled; 1829 } 1830 1831 static void pc_machine_set_sata(Object *obj, bool value, Error **errp) 1832 { 1833 PCMachineState *pcms = PC_MACHINE(obj); 1834 1835 pcms->sata_enabled = value; 1836 } 1837 1838 static bool pc_machine_get_pit(Object *obj, Error **errp) 1839 { 1840 PCMachineState *pcms = PC_MACHINE(obj); 1841 1842 return pcms->pit_enabled; 1843 } 1844 1845 static void pc_machine_set_pit(Object *obj, bool value, Error **errp) 1846 { 1847 PCMachineState *pcms = PC_MACHINE(obj); 1848 1849 pcms->pit_enabled = value; 1850 } 1851 1852 static void pc_machine_initfn(Object *obj) 1853 { 1854 PCMachineState *pcms = PC_MACHINE(obj); 1855 1856 #ifdef CONFIG_VMPORT 1857 pcms->vmport = ON_OFF_AUTO_AUTO; 1858 #else 1859 pcms->vmport = ON_OFF_AUTO_OFF; 1860 #endif /* CONFIG_VMPORT */ 1861 /* acpi build is enabled by default if machine supports it */ 1862 pcms->acpi_build_enabled = PC_MACHINE_GET_CLASS(pcms)->has_acpi_build; 1863 pcms->smbus_enabled = true; 1864 pcms->sata_enabled = true; 1865 pcms->pit_enabled = true; 1866 1867 pc_system_flash_create(pcms); 1868 } 1869 1870 static void pc_machine_reset(MachineState *machine) 1871 { 1872 CPUState *cs; 1873 X86CPU *cpu; 1874 1875 qemu_devices_reset(); 1876 1877 /* Reset APIC after devices have been reset to cancel 1878 * any changes that qemu_devices_reset() might have done. 1879 */ 1880 CPU_FOREACH(cs) { 1881 cpu = X86_CPU(cs); 1882 1883 if (cpu->apic_state) { 1884 device_legacy_reset(cpu->apic_state); 1885 } 1886 } 1887 } 1888 1889 static void pc_machine_wakeup(MachineState *machine) 1890 { 1891 cpu_synchronize_all_states(); 1892 pc_machine_reset(machine); 1893 cpu_synchronize_all_post_reset(); 1894 } 1895 1896 static bool pc_hotplug_allowed(MachineState *ms, DeviceState *dev, Error **errp) 1897 { 1898 X86IOMMUState *iommu = x86_iommu_get_default(); 1899 IntelIOMMUState *intel_iommu; 1900 1901 if (iommu && 1902 object_dynamic_cast((Object *)iommu, TYPE_INTEL_IOMMU_DEVICE) && 1903 object_dynamic_cast((Object *)dev, "vfio-pci")) { 1904 intel_iommu = INTEL_IOMMU_DEVICE(iommu); 1905 if (!intel_iommu->caching_mode) { 1906 error_setg(errp, "Device assignment is not allowed without " 1907 "enabling caching-mode=on for Intel IOMMU."); 1908 return false; 1909 } 1910 } 1911 1912 return true; 1913 } 1914 1915 static void pc_machine_class_init(ObjectClass *oc, void *data) 1916 { 1917 MachineClass *mc = MACHINE_CLASS(oc); 1918 PCMachineClass *pcmc = PC_MACHINE_CLASS(oc); 1919 HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(oc); 1920 1921 pcmc->pci_enabled = true; 1922 pcmc->has_acpi_build = true; 1923 pcmc->rsdp_in_ram = true; 1924 pcmc->smbios_defaults = true; 1925 pcmc->smbios_uuid_encoded = true; 1926 pcmc->gigabyte_align = true; 1927 pcmc->has_reserved_memory = true; 1928 pcmc->kvmclock_enabled = true; 1929 pcmc->enforce_aligned_dimm = true; 1930 /* BIOS ACPI tables: 128K. Other BIOS datastructures: less than 4K reported 1931 * to be used at the moment, 32K should be enough for a while. */ 1932 pcmc->acpi_data_size = 0x20000 + 0x8000; 1933 pcmc->linuxboot_dma_enabled = true; 1934 pcmc->pvh_enabled = true; 1935 assert(!mc->get_hotplug_handler); 1936 mc->get_hotplug_handler = pc_get_hotplug_handler; 1937 mc->hotplug_allowed = pc_hotplug_allowed; 1938 mc->cpu_index_to_instance_props = x86_cpu_index_to_props; 1939 mc->get_default_cpu_node_id = x86_get_default_cpu_node_id; 1940 mc->possible_cpu_arch_ids = x86_possible_cpu_arch_ids; 1941 mc->auto_enable_numa_with_memhp = true; 1942 mc->has_hotpluggable_cpus = true; 1943 mc->default_boot_order = "cad"; 1944 mc->hot_add_cpu = pc_hot_add_cpu; 1945 mc->smp_parse = pc_smp_parse; 1946 mc->block_default_type = IF_IDE; 1947 mc->max_cpus = 255; 1948 mc->reset = pc_machine_reset; 1949 mc->wakeup = pc_machine_wakeup; 1950 hc->pre_plug = pc_machine_device_pre_plug_cb; 1951 hc->plug = pc_machine_device_plug_cb; 1952 hc->unplug_request = pc_machine_device_unplug_request_cb; 1953 hc->unplug = pc_machine_device_unplug_cb; 1954 mc->default_cpu_type = TARGET_DEFAULT_CPU_TYPE; 1955 mc->nvdimm_supported = true; 1956 mc->numa_mem_supported = true; 1957 mc->default_ram_id = "pc.ram"; 1958 1959 object_class_property_add(oc, PC_MACHINE_DEVMEM_REGION_SIZE, "int", 1960 pc_machine_get_device_memory_region_size, NULL, 1961 NULL, NULL, &error_abort); 1962 1963 object_class_property_add(oc, PC_MACHINE_VMPORT, "OnOffAuto", 1964 pc_machine_get_vmport, pc_machine_set_vmport, 1965 NULL, NULL, &error_abort); 1966 object_class_property_set_description(oc, PC_MACHINE_VMPORT, 1967 "Enable vmport (pc & q35)", &error_abort); 1968 1969 object_class_property_add_bool(oc, PC_MACHINE_SMBUS, 1970 pc_machine_get_smbus, pc_machine_set_smbus, &error_abort); 1971 1972 object_class_property_add_bool(oc, PC_MACHINE_SATA, 1973 pc_machine_get_sata, pc_machine_set_sata, &error_abort); 1974 1975 object_class_property_add_bool(oc, PC_MACHINE_PIT, 1976 pc_machine_get_pit, pc_machine_set_pit, &error_abort); 1977 } 1978 1979 static const TypeInfo pc_machine_info = { 1980 .name = TYPE_PC_MACHINE, 1981 .parent = TYPE_X86_MACHINE, 1982 .abstract = true, 1983 .instance_size = sizeof(PCMachineState), 1984 .instance_init = pc_machine_initfn, 1985 .class_size = sizeof(PCMachineClass), 1986 .class_init = pc_machine_class_init, 1987 .interfaces = (InterfaceInfo[]) { 1988 { TYPE_HOTPLUG_HANDLER }, 1989 { } 1990 }, 1991 }; 1992 1993 static void pc_machine_register_types(void) 1994 { 1995 type_register_static(&pc_machine_info); 1996 } 1997 1998 type_init(pc_machine_register_types) 1999