1 /* 2 * QEMU PC System Emulator 3 * 4 * Copyright (c) 2003-2004 Fabrice Bellard 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a copy 7 * of this software and associated documentation files (the "Software"), to deal 8 * in the Software without restriction, including without limitation the rights 9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 * copies of the Software, and to permit persons to whom the Software is 11 * furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice shall be included in 14 * all copies or substantial portions of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 22 * THE SOFTWARE. 23 */ 24 25 #include "qemu/osdep.h" 26 #include "qemu/units.h" 27 #include "hw/i386/x86.h" 28 #include "hw/i386/pc.h" 29 #include "hw/char/serial.h" 30 #include "hw/char/parallel.h" 31 #include "hw/i386/apic.h" 32 #include "hw/i386/topology.h" 33 #include "hw/i386/fw_cfg.h" 34 #include "hw/i386/vmport.h" 35 #include "sysemu/cpus.h" 36 #include "hw/block/fdc.h" 37 #include "hw/ide.h" 38 #include "hw/pci/pci.h" 39 #include "hw/pci/pci_bus.h" 40 #include "hw/pci-bridge/pci_expander_bridge.h" 41 #include "hw/nvram/fw_cfg.h" 42 #include "hw/timer/hpet.h" 43 #include "hw/firmware/smbios.h" 44 #include "hw/loader.h" 45 #include "elf.h" 46 #include "migration/vmstate.h" 47 #include "multiboot.h" 48 #include "hw/rtc/mc146818rtc.h" 49 #include "hw/intc/i8259.h" 50 #include "hw/dma/i8257.h" 51 #include "hw/timer/i8254.h" 52 #include "hw/input/i8042.h" 53 #include "hw/irq.h" 54 #include "hw/audio/pcspk.h" 55 #include "hw/pci/msi.h" 56 #include "hw/sysbus.h" 57 #include "sysemu/sysemu.h" 58 #include "sysemu/tcg.h" 59 #include "sysemu/numa.h" 60 #include "sysemu/kvm.h" 61 #include "sysemu/xen.h" 62 #include "sysemu/reset.h" 63 #include "sysemu/runstate.h" 64 #include "kvm/kvm_i386.h" 65 #include "hw/xen/xen.h" 66 #include "hw/xen/start_info.h" 67 #include "ui/qemu-spice.h" 68 #include "exec/memory.h" 69 #include "qemu/bitmap.h" 70 #include "qemu/config-file.h" 71 #include "qemu/error-report.h" 72 #include "qemu/option.h" 73 #include "qemu/cutils.h" 74 #include "hw/acpi/acpi.h" 75 #include "hw/acpi/cpu_hotplug.h" 76 #include "acpi-build.h" 77 #include "hw/mem/pc-dimm.h" 78 #include "hw/mem/nvdimm.h" 79 #include "hw/cxl/cxl.h" 80 #include "hw/cxl/cxl_host.h" 81 #include "qapi/error.h" 82 #include "qapi/qapi-visit-common.h" 83 #include "qapi/qapi-visit-machine.h" 84 #include "qapi/visitor.h" 85 #include "hw/core/cpu.h" 86 #include "hw/usb.h" 87 #include "hw/i386/intel_iommu.h" 88 #include "hw/net/ne2000-isa.h" 89 #include "standard-headers/asm-x86/bootparam.h" 90 #include "hw/virtio/virtio-iommu.h" 91 #include "hw/virtio/virtio-pmem-pci.h" 92 #include "hw/virtio/virtio-mem-pci.h" 93 #include "hw/mem/memory-device.h" 94 #include "sysemu/replay.h" 95 #include "qapi/qmp/qerror.h" 96 #include "e820_memory_layout.h" 97 #include "fw_cfg.h" 98 #include "trace.h" 99 #include CONFIG_DEVICES 100 101 /* 102 * Helper for setting model-id for CPU models that changed model-id 103 * depending on QEMU versions up to QEMU 2.4. 104 */ 105 #define PC_CPU_MODEL_IDS(v) \ 106 { "qemu32-" TYPE_X86_CPU, "model-id", "QEMU Virtual CPU version " v, },\ 107 { "qemu64-" TYPE_X86_CPU, "model-id", "QEMU Virtual CPU version " v, },\ 108 { "athlon-" TYPE_X86_CPU, "model-id", "QEMU Virtual CPU version " v, }, 109 110 GlobalProperty pc_compat_7_0[] = {}; 111 const size_t pc_compat_7_0_len = G_N_ELEMENTS(pc_compat_7_0); 112 113 GlobalProperty pc_compat_6_2[] = { 114 { "virtio-mem", "unplugged-inaccessible", "off" }, 115 }; 116 const size_t pc_compat_6_2_len = G_N_ELEMENTS(pc_compat_6_2); 117 118 GlobalProperty pc_compat_6_1[] = { 119 { TYPE_X86_CPU, "hv-version-id-build", "0x1bbc" }, 120 { TYPE_X86_CPU, "hv-version-id-major", "0x0006" }, 121 { TYPE_X86_CPU, "hv-version-id-minor", "0x0001" }, 122 { "ICH9-LPC", "x-keep-pci-slot-hpc", "false" }, 123 }; 124 const size_t pc_compat_6_1_len = G_N_ELEMENTS(pc_compat_6_1); 125 126 GlobalProperty pc_compat_6_0[] = { 127 { "qemu64" "-" TYPE_X86_CPU, "family", "6" }, 128 { "qemu64" "-" TYPE_X86_CPU, "model", "6" }, 129 { "qemu64" "-" TYPE_X86_CPU, "stepping", "3" }, 130 { TYPE_X86_CPU, "x-vendor-cpuid-only", "off" }, 131 { "ICH9-LPC", ACPI_PM_PROP_ACPI_PCIHP_BRIDGE, "off" }, 132 { "ICH9-LPC", "x-keep-pci-slot-hpc", "true" }, 133 }; 134 const size_t pc_compat_6_0_len = G_N_ELEMENTS(pc_compat_6_0); 135 136 GlobalProperty pc_compat_5_2[] = { 137 { "ICH9-LPC", "x-smi-cpu-hotunplug", "off" }, 138 }; 139 const size_t pc_compat_5_2_len = G_N_ELEMENTS(pc_compat_5_2); 140 141 GlobalProperty pc_compat_5_1[] = { 142 { "ICH9-LPC", "x-smi-cpu-hotplug", "off" }, 143 { TYPE_X86_CPU, "kvm-msi-ext-dest-id", "off" }, 144 }; 145 const size_t pc_compat_5_1_len = G_N_ELEMENTS(pc_compat_5_1); 146 147 GlobalProperty pc_compat_5_0[] = { 148 }; 149 const size_t pc_compat_5_0_len = G_N_ELEMENTS(pc_compat_5_0); 150 151 GlobalProperty pc_compat_4_2[] = { 152 { "mch", "smbase-smram", "off" }, 153 }; 154 const size_t pc_compat_4_2_len = G_N_ELEMENTS(pc_compat_4_2); 155 156 GlobalProperty pc_compat_4_1[] = {}; 157 const size_t pc_compat_4_1_len = G_N_ELEMENTS(pc_compat_4_1); 158 159 GlobalProperty pc_compat_4_0[] = {}; 160 const size_t pc_compat_4_0_len = G_N_ELEMENTS(pc_compat_4_0); 161 162 GlobalProperty pc_compat_3_1[] = { 163 { "intel-iommu", "dma-drain", "off" }, 164 { "Opteron_G3" "-" TYPE_X86_CPU, "rdtscp", "off" }, 165 { "Opteron_G4" "-" TYPE_X86_CPU, "rdtscp", "off" }, 166 { "Opteron_G4" "-" TYPE_X86_CPU, "npt", "off" }, 167 { "Opteron_G4" "-" TYPE_X86_CPU, "nrip-save", "off" }, 168 { "Opteron_G5" "-" TYPE_X86_CPU, "rdtscp", "off" }, 169 { "Opteron_G5" "-" TYPE_X86_CPU, "npt", "off" }, 170 { "Opteron_G5" "-" TYPE_X86_CPU, "nrip-save", "off" }, 171 { "EPYC" "-" TYPE_X86_CPU, "npt", "off" }, 172 { "EPYC" "-" TYPE_X86_CPU, "nrip-save", "off" }, 173 { "EPYC-IBPB" "-" TYPE_X86_CPU, "npt", "off" }, 174 { "EPYC-IBPB" "-" TYPE_X86_CPU, "nrip-save", "off" }, 175 { "Skylake-Client" "-" TYPE_X86_CPU, "mpx", "on" }, 176 { "Skylake-Client-IBRS" "-" TYPE_X86_CPU, "mpx", "on" }, 177 { "Skylake-Server" "-" TYPE_X86_CPU, "mpx", "on" }, 178 { "Skylake-Server-IBRS" "-" TYPE_X86_CPU, "mpx", "on" }, 179 { "Cascadelake-Server" "-" TYPE_X86_CPU, "mpx", "on" }, 180 { "Icelake-Client" "-" TYPE_X86_CPU, "mpx", "on" }, 181 { "Icelake-Server" "-" TYPE_X86_CPU, "mpx", "on" }, 182 { "Cascadelake-Server" "-" TYPE_X86_CPU, "stepping", "5" }, 183 { TYPE_X86_CPU, "x-intel-pt-auto-level", "off" }, 184 }; 185 const size_t pc_compat_3_1_len = G_N_ELEMENTS(pc_compat_3_1); 186 187 GlobalProperty pc_compat_3_0[] = { 188 { TYPE_X86_CPU, "x-hv-synic-kvm-only", "on" }, 189 { "Skylake-Server" "-" TYPE_X86_CPU, "pku", "off" }, 190 { "Skylake-Server-IBRS" "-" TYPE_X86_CPU, "pku", "off" }, 191 }; 192 const size_t pc_compat_3_0_len = G_N_ELEMENTS(pc_compat_3_0); 193 194 GlobalProperty pc_compat_2_12[] = { 195 { TYPE_X86_CPU, "legacy-cache", "on" }, 196 { TYPE_X86_CPU, "topoext", "off" }, 197 { "EPYC-" TYPE_X86_CPU, "xlevel", "0x8000000a" }, 198 { "EPYC-IBPB-" TYPE_X86_CPU, "xlevel", "0x8000000a" }, 199 }; 200 const size_t pc_compat_2_12_len = G_N_ELEMENTS(pc_compat_2_12); 201 202 GlobalProperty pc_compat_2_11[] = { 203 { TYPE_X86_CPU, "x-migrate-smi-count", "off" }, 204 { "Skylake-Server" "-" TYPE_X86_CPU, "clflushopt", "off" }, 205 }; 206 const size_t pc_compat_2_11_len = G_N_ELEMENTS(pc_compat_2_11); 207 208 GlobalProperty pc_compat_2_10[] = { 209 { TYPE_X86_CPU, "x-hv-max-vps", "0x40" }, 210 { "i440FX-pcihost", "x-pci-hole64-fix", "off" }, 211 { "q35-pcihost", "x-pci-hole64-fix", "off" }, 212 }; 213 const size_t pc_compat_2_10_len = G_N_ELEMENTS(pc_compat_2_10); 214 215 GlobalProperty pc_compat_2_9[] = { 216 { "mch", "extended-tseg-mbytes", "0" }, 217 }; 218 const size_t pc_compat_2_9_len = G_N_ELEMENTS(pc_compat_2_9); 219 220 GlobalProperty pc_compat_2_8[] = { 221 { TYPE_X86_CPU, "tcg-cpuid", "off" }, 222 { "kvmclock", "x-mach-use-reliable-get-clock", "off" }, 223 { "ICH9-LPC", "x-smi-broadcast", "off" }, 224 { TYPE_X86_CPU, "vmware-cpuid-freq", "off" }, 225 { "Haswell-" TYPE_X86_CPU, "stepping", "1" }, 226 }; 227 const size_t pc_compat_2_8_len = G_N_ELEMENTS(pc_compat_2_8); 228 229 GlobalProperty pc_compat_2_7[] = { 230 { TYPE_X86_CPU, "l3-cache", "off" }, 231 { TYPE_X86_CPU, "full-cpuid-auto-level", "off" }, 232 { "Opteron_G3" "-" TYPE_X86_CPU, "family", "15" }, 233 { "Opteron_G3" "-" TYPE_X86_CPU, "model", "6" }, 234 { "Opteron_G3" "-" TYPE_X86_CPU, "stepping", "1" }, 235 { "isa-pcspk", "migrate", "off" }, 236 }; 237 const size_t pc_compat_2_7_len = G_N_ELEMENTS(pc_compat_2_7); 238 239 GlobalProperty pc_compat_2_6[] = { 240 { TYPE_X86_CPU, "cpuid-0xb", "off" }, 241 { "vmxnet3", "romfile", "" }, 242 { TYPE_X86_CPU, "fill-mtrr-mask", "off" }, 243 { "apic-common", "legacy-instance-id", "on", } 244 }; 245 const size_t pc_compat_2_6_len = G_N_ELEMENTS(pc_compat_2_6); 246 247 GlobalProperty pc_compat_2_5[] = {}; 248 const size_t pc_compat_2_5_len = G_N_ELEMENTS(pc_compat_2_5); 249 250 GlobalProperty pc_compat_2_4[] = { 251 PC_CPU_MODEL_IDS("2.4.0") 252 { "Haswell-" TYPE_X86_CPU, "abm", "off" }, 253 { "Haswell-noTSX-" TYPE_X86_CPU, "abm", "off" }, 254 { "Broadwell-" TYPE_X86_CPU, "abm", "off" }, 255 { "Broadwell-noTSX-" TYPE_X86_CPU, "abm", "off" }, 256 { "host" "-" TYPE_X86_CPU, "host-cache-info", "on" }, 257 { TYPE_X86_CPU, "check", "off" }, 258 { "qemu64" "-" TYPE_X86_CPU, "sse4a", "on" }, 259 { "qemu64" "-" TYPE_X86_CPU, "abm", "on" }, 260 { "qemu64" "-" TYPE_X86_CPU, "popcnt", "on" }, 261 { "qemu32" "-" TYPE_X86_CPU, "popcnt", "on" }, 262 { "Opteron_G2" "-" TYPE_X86_CPU, "rdtscp", "on" }, 263 { "Opteron_G3" "-" TYPE_X86_CPU, "rdtscp", "on" }, 264 { "Opteron_G4" "-" TYPE_X86_CPU, "rdtscp", "on" }, 265 { "Opteron_G5" "-" TYPE_X86_CPU, "rdtscp", "on", } 266 }; 267 const size_t pc_compat_2_4_len = G_N_ELEMENTS(pc_compat_2_4); 268 269 GlobalProperty pc_compat_2_3[] = { 270 PC_CPU_MODEL_IDS("2.3.0") 271 { TYPE_X86_CPU, "arat", "off" }, 272 { "qemu64" "-" TYPE_X86_CPU, "min-level", "4" }, 273 { "kvm64" "-" TYPE_X86_CPU, "min-level", "5" }, 274 { "pentium3" "-" TYPE_X86_CPU, "min-level", "2" }, 275 { "n270" "-" TYPE_X86_CPU, "min-level", "5" }, 276 { "Conroe" "-" TYPE_X86_CPU, "min-level", "4" }, 277 { "Penryn" "-" TYPE_X86_CPU, "min-level", "4" }, 278 { "Nehalem" "-" TYPE_X86_CPU, "min-level", "4" }, 279 { "n270" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 280 { "Penryn" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 281 { "Conroe" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 282 { "Nehalem" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 283 { "Westmere" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 284 { "SandyBridge" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 285 { "IvyBridge" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 286 { "Haswell" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 287 { "Haswell-noTSX" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 288 { "Broadwell" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 289 { "Broadwell-noTSX" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 290 { TYPE_X86_CPU, "kvm-no-smi-migration", "on" }, 291 }; 292 const size_t pc_compat_2_3_len = G_N_ELEMENTS(pc_compat_2_3); 293 294 GlobalProperty pc_compat_2_2[] = { 295 PC_CPU_MODEL_IDS("2.2.0") 296 { "kvm64" "-" TYPE_X86_CPU, "vme", "off" }, 297 { "kvm32" "-" TYPE_X86_CPU, "vme", "off" }, 298 { "Conroe" "-" TYPE_X86_CPU, "vme", "off" }, 299 { "Penryn" "-" TYPE_X86_CPU, "vme", "off" }, 300 { "Nehalem" "-" TYPE_X86_CPU, "vme", "off" }, 301 { "Westmere" "-" TYPE_X86_CPU, "vme", "off" }, 302 { "SandyBridge" "-" TYPE_X86_CPU, "vme", "off" }, 303 { "Haswell" "-" TYPE_X86_CPU, "vme", "off" }, 304 { "Broadwell" "-" TYPE_X86_CPU, "vme", "off" }, 305 { "Opteron_G1" "-" TYPE_X86_CPU, "vme", "off" }, 306 { "Opteron_G2" "-" TYPE_X86_CPU, "vme", "off" }, 307 { "Opteron_G3" "-" TYPE_X86_CPU, "vme", "off" }, 308 { "Opteron_G4" "-" TYPE_X86_CPU, "vme", "off" }, 309 { "Opteron_G5" "-" TYPE_X86_CPU, "vme", "off" }, 310 { "Haswell" "-" TYPE_X86_CPU, "f16c", "off" }, 311 { "Haswell" "-" TYPE_X86_CPU, "rdrand", "off" }, 312 { "Broadwell" "-" TYPE_X86_CPU, "f16c", "off" }, 313 { "Broadwell" "-" TYPE_X86_CPU, "rdrand", "off" }, 314 }; 315 const size_t pc_compat_2_2_len = G_N_ELEMENTS(pc_compat_2_2); 316 317 GlobalProperty pc_compat_2_1[] = { 318 PC_CPU_MODEL_IDS("2.1.0") 319 { "coreduo" "-" TYPE_X86_CPU, "vmx", "on" }, 320 { "core2duo" "-" TYPE_X86_CPU, "vmx", "on" }, 321 }; 322 const size_t pc_compat_2_1_len = G_N_ELEMENTS(pc_compat_2_1); 323 324 GlobalProperty pc_compat_2_0[] = { 325 PC_CPU_MODEL_IDS("2.0.0") 326 { "virtio-scsi-pci", "any_layout", "off" }, 327 { "PIIX4_PM", "memory-hotplug-support", "off" }, 328 { "apic", "version", "0x11" }, 329 { "nec-usb-xhci", "superspeed-ports-first", "off" }, 330 { "nec-usb-xhci", "force-pcie-endcap", "on" }, 331 { "pci-serial", "prog_if", "0" }, 332 { "pci-serial-2x", "prog_if", "0" }, 333 { "pci-serial-4x", "prog_if", "0" }, 334 { "virtio-net-pci", "guest_announce", "off" }, 335 { "ICH9-LPC", "memory-hotplug-support", "off" }, 336 }; 337 const size_t pc_compat_2_0_len = G_N_ELEMENTS(pc_compat_2_0); 338 339 GlobalProperty pc_compat_1_7[] = { 340 PC_CPU_MODEL_IDS("1.7.0") 341 { TYPE_USB_DEVICE, "msos-desc", "no" }, 342 { "PIIX4_PM", ACPI_PM_PROP_ACPI_PCIHP_BRIDGE, "off" }, 343 { "hpet", HPET_INTCAP, "4" }, 344 }; 345 const size_t pc_compat_1_7_len = G_N_ELEMENTS(pc_compat_1_7); 346 347 GlobalProperty pc_compat_1_6[] = { 348 PC_CPU_MODEL_IDS("1.6.0") 349 { "e1000", "mitigation", "off" }, 350 { "qemu64-" TYPE_X86_CPU, "model", "2" }, 351 { "qemu32-" TYPE_X86_CPU, "model", "3" }, 352 { "i440FX-pcihost", "short_root_bus", "1" }, 353 { "q35-pcihost", "short_root_bus", "1" }, 354 }; 355 const size_t pc_compat_1_6_len = G_N_ELEMENTS(pc_compat_1_6); 356 357 GlobalProperty pc_compat_1_5[] = { 358 PC_CPU_MODEL_IDS("1.5.0") 359 { "Conroe-" TYPE_X86_CPU, "model", "2" }, 360 { "Conroe-" TYPE_X86_CPU, "min-level", "2" }, 361 { "Penryn-" TYPE_X86_CPU, "model", "2" }, 362 { "Penryn-" TYPE_X86_CPU, "min-level", "2" }, 363 { "Nehalem-" TYPE_X86_CPU, "model", "2" }, 364 { "Nehalem-" TYPE_X86_CPU, "min-level", "2" }, 365 { "virtio-net-pci", "any_layout", "off" }, 366 { TYPE_X86_CPU, "pmu", "on" }, 367 { "i440FX-pcihost", "short_root_bus", "0" }, 368 { "q35-pcihost", "short_root_bus", "0" }, 369 }; 370 const size_t pc_compat_1_5_len = G_N_ELEMENTS(pc_compat_1_5); 371 372 GlobalProperty pc_compat_1_4[] = { 373 PC_CPU_MODEL_IDS("1.4.0") 374 { "scsi-hd", "discard_granularity", "0" }, 375 { "scsi-cd", "discard_granularity", "0" }, 376 { "ide-hd", "discard_granularity", "0" }, 377 { "ide-cd", "discard_granularity", "0" }, 378 { "virtio-blk-pci", "discard_granularity", "0" }, 379 /* DEV_NVECTORS_UNSPECIFIED as a uint32_t string: */ 380 { "virtio-serial-pci", "vectors", "0xFFFFFFFF" }, 381 { "virtio-net-pci", "ctrl_guest_offloads", "off" }, 382 { "e1000", "romfile", "pxe-e1000.rom" }, 383 { "ne2k_pci", "romfile", "pxe-ne2k_pci.rom" }, 384 { "pcnet", "romfile", "pxe-pcnet.rom" }, 385 { "rtl8139", "romfile", "pxe-rtl8139.rom" }, 386 { "virtio-net-pci", "romfile", "pxe-virtio.rom" }, 387 { "486-" TYPE_X86_CPU, "model", "0" }, 388 { "n270" "-" TYPE_X86_CPU, "movbe", "off" }, 389 { "Westmere" "-" TYPE_X86_CPU, "pclmulqdq", "off" }, 390 }; 391 const size_t pc_compat_1_4_len = G_N_ELEMENTS(pc_compat_1_4); 392 393 GSIState *pc_gsi_create(qemu_irq **irqs, bool pci_enabled) 394 { 395 GSIState *s; 396 397 s = g_new0(GSIState, 1); 398 if (kvm_ioapic_in_kernel()) { 399 kvm_pc_setup_irq_routing(pci_enabled); 400 } 401 *irqs = qemu_allocate_irqs(gsi_handler, s, GSI_NUM_PINS); 402 403 return s; 404 } 405 406 static void ioport80_write(void *opaque, hwaddr addr, uint64_t data, 407 unsigned size) 408 { 409 } 410 411 static uint64_t ioport80_read(void *opaque, hwaddr addr, unsigned size) 412 { 413 return 0xffffffffffffffffULL; 414 } 415 416 /* MSDOS compatibility mode FPU exception support */ 417 static void ioportF0_write(void *opaque, hwaddr addr, uint64_t data, 418 unsigned size) 419 { 420 if (tcg_enabled()) { 421 cpu_set_ignne(); 422 } 423 } 424 425 static uint64_t ioportF0_read(void *opaque, hwaddr addr, unsigned size) 426 { 427 return 0xffffffffffffffffULL; 428 } 429 430 /* PC cmos mappings */ 431 432 #define REG_EQUIPMENT_BYTE 0x14 433 434 static void cmos_init_hd(ISADevice *s, int type_ofs, int info_ofs, 435 int16_t cylinders, int8_t heads, int8_t sectors) 436 { 437 rtc_set_memory(s, type_ofs, 47); 438 rtc_set_memory(s, info_ofs, cylinders); 439 rtc_set_memory(s, info_ofs + 1, cylinders >> 8); 440 rtc_set_memory(s, info_ofs + 2, heads); 441 rtc_set_memory(s, info_ofs + 3, 0xff); 442 rtc_set_memory(s, info_ofs + 4, 0xff); 443 rtc_set_memory(s, info_ofs + 5, 0xc0 | ((heads > 8) << 3)); 444 rtc_set_memory(s, info_ofs + 6, cylinders); 445 rtc_set_memory(s, info_ofs + 7, cylinders >> 8); 446 rtc_set_memory(s, info_ofs + 8, sectors); 447 } 448 449 /* convert boot_device letter to something recognizable by the bios */ 450 static int boot_device2nibble(char boot_device) 451 { 452 switch(boot_device) { 453 case 'a': 454 case 'b': 455 return 0x01; /* floppy boot */ 456 case 'c': 457 return 0x02; /* hard drive boot */ 458 case 'd': 459 return 0x03; /* CD-ROM boot */ 460 case 'n': 461 return 0x04; /* Network boot */ 462 } 463 return 0; 464 } 465 466 static void set_boot_dev(ISADevice *s, const char *boot_device, Error **errp) 467 { 468 #define PC_MAX_BOOT_DEVICES 3 469 int nbds, bds[3] = { 0, }; 470 int i; 471 472 nbds = strlen(boot_device); 473 if (nbds > PC_MAX_BOOT_DEVICES) { 474 error_setg(errp, "Too many boot devices for PC"); 475 return; 476 } 477 for (i = 0; i < nbds; i++) { 478 bds[i] = boot_device2nibble(boot_device[i]); 479 if (bds[i] == 0) { 480 error_setg(errp, "Invalid boot device for PC: '%c'", 481 boot_device[i]); 482 return; 483 } 484 } 485 rtc_set_memory(s, 0x3d, (bds[1] << 4) | bds[0]); 486 rtc_set_memory(s, 0x38, (bds[2] << 4) | (fd_bootchk ? 0x0 : 0x1)); 487 } 488 489 static void pc_boot_set(void *opaque, const char *boot_device, Error **errp) 490 { 491 set_boot_dev(opaque, boot_device, errp); 492 } 493 494 static void pc_cmos_init_floppy(ISADevice *rtc_state, ISADevice *floppy) 495 { 496 int val, nb, i; 497 FloppyDriveType fd_type[2] = { FLOPPY_DRIVE_TYPE_NONE, 498 FLOPPY_DRIVE_TYPE_NONE }; 499 500 /* floppy type */ 501 if (floppy) { 502 for (i = 0; i < 2; i++) { 503 fd_type[i] = isa_fdc_get_drive_type(floppy, i); 504 } 505 } 506 val = (cmos_get_fd_drive_type(fd_type[0]) << 4) | 507 cmos_get_fd_drive_type(fd_type[1]); 508 rtc_set_memory(rtc_state, 0x10, val); 509 510 val = rtc_get_memory(rtc_state, REG_EQUIPMENT_BYTE); 511 nb = 0; 512 if (fd_type[0] != FLOPPY_DRIVE_TYPE_NONE) { 513 nb++; 514 } 515 if (fd_type[1] != FLOPPY_DRIVE_TYPE_NONE) { 516 nb++; 517 } 518 switch (nb) { 519 case 0: 520 break; 521 case 1: 522 val |= 0x01; /* 1 drive, ready for boot */ 523 break; 524 case 2: 525 val |= 0x41; /* 2 drives, ready for boot */ 526 break; 527 } 528 rtc_set_memory(rtc_state, REG_EQUIPMENT_BYTE, val); 529 } 530 531 typedef struct pc_cmos_init_late_arg { 532 ISADevice *rtc_state; 533 BusState *idebus[2]; 534 } pc_cmos_init_late_arg; 535 536 typedef struct check_fdc_state { 537 ISADevice *floppy; 538 bool multiple; 539 } CheckFdcState; 540 541 static int check_fdc(Object *obj, void *opaque) 542 { 543 CheckFdcState *state = opaque; 544 Object *fdc; 545 uint32_t iobase; 546 Error *local_err = NULL; 547 548 fdc = object_dynamic_cast(obj, TYPE_ISA_FDC); 549 if (!fdc) { 550 return 0; 551 } 552 553 iobase = object_property_get_uint(obj, "iobase", &local_err); 554 if (local_err || iobase != 0x3f0) { 555 error_free(local_err); 556 return 0; 557 } 558 559 if (state->floppy) { 560 state->multiple = true; 561 } else { 562 state->floppy = ISA_DEVICE(obj); 563 } 564 return 0; 565 } 566 567 static const char * const fdc_container_path[] = { 568 "/unattached", "/peripheral", "/peripheral-anon" 569 }; 570 571 /* 572 * Locate the FDC at IO address 0x3f0, in order to configure the CMOS registers 573 * and ACPI objects. 574 */ 575 static ISADevice *pc_find_fdc0(void) 576 { 577 int i; 578 Object *container; 579 CheckFdcState state = { 0 }; 580 581 for (i = 0; i < ARRAY_SIZE(fdc_container_path); i++) { 582 container = container_get(qdev_get_machine(), fdc_container_path[i]); 583 object_child_foreach(container, check_fdc, &state); 584 } 585 586 if (state.multiple) { 587 warn_report("multiple floppy disk controllers with " 588 "iobase=0x3f0 have been found"); 589 error_printf("the one being picked for CMOS setup might not reflect " 590 "your intent"); 591 } 592 593 return state.floppy; 594 } 595 596 static void pc_cmos_init_late(void *opaque) 597 { 598 pc_cmos_init_late_arg *arg = opaque; 599 ISADevice *s = arg->rtc_state; 600 int16_t cylinders; 601 int8_t heads, sectors; 602 int val; 603 int i, trans; 604 605 val = 0; 606 if (arg->idebus[0] && ide_get_geometry(arg->idebus[0], 0, 607 &cylinders, &heads, §ors) >= 0) { 608 cmos_init_hd(s, 0x19, 0x1b, cylinders, heads, sectors); 609 val |= 0xf0; 610 } 611 if (arg->idebus[0] && ide_get_geometry(arg->idebus[0], 1, 612 &cylinders, &heads, §ors) >= 0) { 613 cmos_init_hd(s, 0x1a, 0x24, cylinders, heads, sectors); 614 val |= 0x0f; 615 } 616 rtc_set_memory(s, 0x12, val); 617 618 val = 0; 619 for (i = 0; i < 4; i++) { 620 /* NOTE: ide_get_geometry() returns the physical 621 geometry. It is always such that: 1 <= sects <= 63, 1 622 <= heads <= 16, 1 <= cylinders <= 16383. The BIOS 623 geometry can be different if a translation is done. */ 624 if (arg->idebus[i / 2] && 625 ide_get_geometry(arg->idebus[i / 2], i % 2, 626 &cylinders, &heads, §ors) >= 0) { 627 trans = ide_get_bios_chs_trans(arg->idebus[i / 2], i % 2) - 1; 628 assert((trans & ~3) == 0); 629 val |= trans << (i * 2); 630 } 631 } 632 rtc_set_memory(s, 0x39, val); 633 634 pc_cmos_init_floppy(s, pc_find_fdc0()); 635 636 qemu_unregister_reset(pc_cmos_init_late, opaque); 637 } 638 639 void pc_cmos_init(PCMachineState *pcms, 640 BusState *idebus0, BusState *idebus1, 641 ISADevice *s) 642 { 643 int val; 644 static pc_cmos_init_late_arg arg; 645 X86MachineState *x86ms = X86_MACHINE(pcms); 646 647 /* various important CMOS locations needed by PC/Bochs bios */ 648 649 /* memory size */ 650 /* base memory (first MiB) */ 651 val = MIN(x86ms->below_4g_mem_size / KiB, 640); 652 rtc_set_memory(s, 0x15, val); 653 rtc_set_memory(s, 0x16, val >> 8); 654 /* extended memory (next 64MiB) */ 655 if (x86ms->below_4g_mem_size > 1 * MiB) { 656 val = (x86ms->below_4g_mem_size - 1 * MiB) / KiB; 657 } else { 658 val = 0; 659 } 660 if (val > 65535) 661 val = 65535; 662 rtc_set_memory(s, 0x17, val); 663 rtc_set_memory(s, 0x18, val >> 8); 664 rtc_set_memory(s, 0x30, val); 665 rtc_set_memory(s, 0x31, val >> 8); 666 /* memory between 16MiB and 4GiB */ 667 if (x86ms->below_4g_mem_size > 16 * MiB) { 668 val = (x86ms->below_4g_mem_size - 16 * MiB) / (64 * KiB); 669 } else { 670 val = 0; 671 } 672 if (val > 65535) 673 val = 65535; 674 rtc_set_memory(s, 0x34, val); 675 rtc_set_memory(s, 0x35, val >> 8); 676 /* memory above 4GiB */ 677 val = x86ms->above_4g_mem_size / 65536; 678 rtc_set_memory(s, 0x5b, val); 679 rtc_set_memory(s, 0x5c, val >> 8); 680 rtc_set_memory(s, 0x5d, val >> 16); 681 682 object_property_add_link(OBJECT(pcms), "rtc_state", 683 TYPE_ISA_DEVICE, 684 (Object **)&x86ms->rtc, 685 object_property_allow_set_link, 686 OBJ_PROP_LINK_STRONG); 687 object_property_set_link(OBJECT(pcms), "rtc_state", OBJECT(s), 688 &error_abort); 689 690 set_boot_dev(s, MACHINE(pcms)->boot_config.order, &error_fatal); 691 692 val = 0; 693 val |= 0x02; /* FPU is there */ 694 val |= 0x04; /* PS/2 mouse installed */ 695 rtc_set_memory(s, REG_EQUIPMENT_BYTE, val); 696 697 /* hard drives and FDC */ 698 arg.rtc_state = s; 699 arg.idebus[0] = idebus0; 700 arg.idebus[1] = idebus1; 701 qemu_register_reset(pc_cmos_init_late, &arg); 702 } 703 704 static void handle_a20_line_change(void *opaque, int irq, int level) 705 { 706 X86CPU *cpu = opaque; 707 708 /* XXX: send to all CPUs ? */ 709 /* XXX: add logic to handle multiple A20 line sources */ 710 x86_cpu_set_a20(cpu, level); 711 } 712 713 #define NE2000_NB_MAX 6 714 715 static const int ne2000_io[NE2000_NB_MAX] = { 0x300, 0x320, 0x340, 0x360, 716 0x280, 0x380 }; 717 static const int ne2000_irq[NE2000_NB_MAX] = { 9, 10, 11, 3, 4, 5 }; 718 719 static void pc_init_ne2k_isa(ISABus *bus, NICInfo *nd) 720 { 721 static int nb_ne2k = 0; 722 723 if (nb_ne2k == NE2000_NB_MAX) 724 return; 725 isa_ne2000_init(bus, ne2000_io[nb_ne2k], 726 ne2000_irq[nb_ne2k], nd); 727 nb_ne2k++; 728 } 729 730 void pc_acpi_smi_interrupt(void *opaque, int irq, int level) 731 { 732 X86CPU *cpu = opaque; 733 734 if (level) { 735 cpu_interrupt(CPU(cpu), CPU_INTERRUPT_SMI); 736 } 737 } 738 739 static 740 void pc_machine_done(Notifier *notifier, void *data) 741 { 742 PCMachineState *pcms = container_of(notifier, 743 PCMachineState, machine_done); 744 X86MachineState *x86ms = X86_MACHINE(pcms); 745 746 cxl_hook_up_pxb_registers(pcms->bus, &pcms->cxl_devices_state, 747 &error_fatal); 748 749 if (pcms->cxl_devices_state.is_enabled) { 750 cxl_fmws_link_targets(&pcms->cxl_devices_state, &error_fatal); 751 } 752 753 /* set the number of CPUs */ 754 x86_rtc_set_cpus_count(x86ms->rtc, x86ms->boot_cpus); 755 756 fw_cfg_add_extra_pci_roots(pcms->bus, x86ms->fw_cfg); 757 758 acpi_setup(); 759 if (x86ms->fw_cfg) { 760 fw_cfg_build_smbios(MACHINE(pcms), x86ms->fw_cfg); 761 fw_cfg_build_feature_control(MACHINE(pcms), x86ms->fw_cfg); 762 /* update FW_CFG_NB_CPUS to account for -device added CPUs */ 763 fw_cfg_modify_i16(x86ms->fw_cfg, FW_CFG_NB_CPUS, x86ms->boot_cpus); 764 } 765 } 766 767 void pc_guest_info_init(PCMachineState *pcms) 768 { 769 X86MachineState *x86ms = X86_MACHINE(pcms); 770 771 x86ms->apic_xrupt_override = true; 772 pcms->machine_done.notify = pc_machine_done; 773 qemu_add_machine_init_done_notifier(&pcms->machine_done); 774 } 775 776 /* setup pci memory address space mapping into system address space */ 777 void pc_pci_as_mapping_init(Object *owner, MemoryRegion *system_memory, 778 MemoryRegion *pci_address_space) 779 { 780 /* Set to lower priority than RAM */ 781 memory_region_add_subregion_overlap(system_memory, 0x0, 782 pci_address_space, -1); 783 } 784 785 void xen_load_linux(PCMachineState *pcms) 786 { 787 int i; 788 FWCfgState *fw_cfg; 789 PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); 790 X86MachineState *x86ms = X86_MACHINE(pcms); 791 792 assert(MACHINE(pcms)->kernel_filename != NULL); 793 794 fw_cfg = fw_cfg_init_io(FW_CFG_IO_BASE); 795 fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, x86ms->boot_cpus); 796 rom_set_fw(fw_cfg); 797 798 x86_load_linux(x86ms, fw_cfg, pcmc->acpi_data_size, 799 pcmc->pvh_enabled); 800 for (i = 0; i < nb_option_roms; i++) { 801 assert(!strcmp(option_rom[i].name, "linuxboot.bin") || 802 !strcmp(option_rom[i].name, "linuxboot_dma.bin") || 803 !strcmp(option_rom[i].name, "pvh.bin") || 804 !strcmp(option_rom[i].name, "multiboot.bin") || 805 !strcmp(option_rom[i].name, "multiboot_dma.bin")); 806 rom_add_option(option_rom[i].name, option_rom[i].bootindex); 807 } 808 x86ms->fw_cfg = fw_cfg; 809 } 810 811 #define PC_ROM_MIN_VGA 0xc0000 812 #define PC_ROM_MIN_OPTION 0xc8000 813 #define PC_ROM_MAX 0xe0000 814 #define PC_ROM_ALIGN 0x800 815 #define PC_ROM_SIZE (PC_ROM_MAX - PC_ROM_MIN_VGA) 816 817 void pc_memory_init(PCMachineState *pcms, 818 MemoryRegion *system_memory, 819 MemoryRegion *rom_memory, 820 MemoryRegion **ram_memory) 821 { 822 int linux_boot, i; 823 MemoryRegion *option_rom_mr; 824 MemoryRegion *ram_below_4g, *ram_above_4g; 825 FWCfgState *fw_cfg; 826 MachineState *machine = MACHINE(pcms); 827 MachineClass *mc = MACHINE_GET_CLASS(machine); 828 PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); 829 X86MachineState *x86ms = X86_MACHINE(pcms); 830 hwaddr cxl_base, cxl_resv_end = 0; 831 832 assert(machine->ram_size == x86ms->below_4g_mem_size + 833 x86ms->above_4g_mem_size); 834 835 linux_boot = (machine->kernel_filename != NULL); 836 837 /* 838 * Split single memory region and use aliases to address portions of it, 839 * done for backwards compatibility with older qemus. 840 */ 841 *ram_memory = machine->ram; 842 ram_below_4g = g_malloc(sizeof(*ram_below_4g)); 843 memory_region_init_alias(ram_below_4g, NULL, "ram-below-4g", machine->ram, 844 0, x86ms->below_4g_mem_size); 845 memory_region_add_subregion(system_memory, 0, ram_below_4g); 846 e820_add_entry(0, x86ms->below_4g_mem_size, E820_RAM); 847 if (x86ms->above_4g_mem_size > 0) { 848 ram_above_4g = g_malloc(sizeof(*ram_above_4g)); 849 memory_region_init_alias(ram_above_4g, NULL, "ram-above-4g", 850 machine->ram, 851 x86ms->below_4g_mem_size, 852 x86ms->above_4g_mem_size); 853 memory_region_add_subregion(system_memory, 0x100000000ULL, 854 ram_above_4g); 855 e820_add_entry(0x100000000ULL, x86ms->above_4g_mem_size, E820_RAM); 856 } 857 858 if (pcms->sgx_epc.size != 0) { 859 e820_add_entry(pcms->sgx_epc.base, pcms->sgx_epc.size, E820_RESERVED); 860 } 861 862 if (!pcmc->has_reserved_memory && 863 (machine->ram_slots || 864 (machine->maxram_size > machine->ram_size))) { 865 866 error_report("\"-memory 'slots|maxmem'\" is not supported by: %s", 867 mc->name); 868 exit(EXIT_FAILURE); 869 } 870 871 /* always allocate the device memory information */ 872 machine->device_memory = g_malloc0(sizeof(*machine->device_memory)); 873 874 /* initialize device memory address space */ 875 if (pcmc->has_reserved_memory && 876 (machine->ram_size < machine->maxram_size)) { 877 ram_addr_t device_mem_size = machine->maxram_size - machine->ram_size; 878 879 if (machine->ram_slots > ACPI_MAX_RAM_SLOTS) { 880 error_report("unsupported amount of memory slots: %"PRIu64, 881 machine->ram_slots); 882 exit(EXIT_FAILURE); 883 } 884 885 if (QEMU_ALIGN_UP(machine->maxram_size, 886 TARGET_PAGE_SIZE) != machine->maxram_size) { 887 error_report("maximum memory size must by aligned to multiple of " 888 "%d bytes", TARGET_PAGE_SIZE); 889 exit(EXIT_FAILURE); 890 } 891 892 if (pcms->sgx_epc.size != 0) { 893 machine->device_memory->base = sgx_epc_above_4g_end(&pcms->sgx_epc); 894 } else { 895 machine->device_memory->base = 896 0x100000000ULL + x86ms->above_4g_mem_size; 897 } 898 899 machine->device_memory->base = 900 ROUND_UP(machine->device_memory->base, 1 * GiB); 901 902 if (pcmc->enforce_aligned_dimm) { 903 /* size device region assuming 1G page max alignment per slot */ 904 device_mem_size += (1 * GiB) * machine->ram_slots; 905 } 906 907 if ((machine->device_memory->base + device_mem_size) < 908 device_mem_size) { 909 error_report("unsupported amount of maximum memory: " RAM_ADDR_FMT, 910 machine->maxram_size); 911 exit(EXIT_FAILURE); 912 } 913 914 memory_region_init(&machine->device_memory->mr, OBJECT(pcms), 915 "device-memory", device_mem_size); 916 memory_region_add_subregion(system_memory, machine->device_memory->base, 917 &machine->device_memory->mr); 918 } 919 920 if (pcms->cxl_devices_state.is_enabled) { 921 MemoryRegion *mr = &pcms->cxl_devices_state.host_mr; 922 hwaddr cxl_size = MiB; 923 924 if (pcmc->has_reserved_memory && machine->device_memory->base) { 925 cxl_base = machine->device_memory->base; 926 if (!pcmc->broken_reserved_end) { 927 cxl_base += memory_region_size(&machine->device_memory->mr); 928 } 929 } else if (pcms->sgx_epc.size != 0) { 930 cxl_base = sgx_epc_above_4g_end(&pcms->sgx_epc); 931 } else { 932 cxl_base = 0x100000000ULL + x86ms->above_4g_mem_size; 933 } 934 935 e820_add_entry(cxl_base, cxl_size, E820_RESERVED); 936 memory_region_init(mr, OBJECT(machine), "cxl_host_reg", cxl_size); 937 memory_region_add_subregion(system_memory, cxl_base, mr); 938 cxl_resv_end = cxl_base + cxl_size; 939 if (pcms->cxl_devices_state.fixed_windows) { 940 hwaddr cxl_fmw_base; 941 GList *it; 942 943 cxl_fmw_base = ROUND_UP(cxl_base + cxl_size, 256 * MiB); 944 for (it = pcms->cxl_devices_state.fixed_windows; it; it = it->next) { 945 CXLFixedWindow *fw = it->data; 946 947 fw->base = cxl_fmw_base; 948 memory_region_init_io(&fw->mr, OBJECT(machine), &cfmws_ops, fw, 949 "cxl-fixed-memory-region", fw->size); 950 memory_region_add_subregion(system_memory, fw->base, &fw->mr); 951 e820_add_entry(fw->base, fw->size, E820_RESERVED); 952 cxl_fmw_base += fw->size; 953 cxl_resv_end = cxl_fmw_base; 954 } 955 } 956 } 957 958 /* Initialize PC system firmware */ 959 pc_system_firmware_init(pcms, rom_memory); 960 961 option_rom_mr = g_malloc(sizeof(*option_rom_mr)); 962 memory_region_init_ram(option_rom_mr, NULL, "pc.rom", PC_ROM_SIZE, 963 &error_fatal); 964 if (pcmc->pci_enabled) { 965 memory_region_set_readonly(option_rom_mr, true); 966 } 967 memory_region_add_subregion_overlap(rom_memory, 968 PC_ROM_MIN_VGA, 969 option_rom_mr, 970 1); 971 972 fw_cfg = fw_cfg_arch_create(machine, 973 x86ms->boot_cpus, x86ms->apic_id_limit); 974 975 rom_set_fw(fw_cfg); 976 977 if (pcmc->has_reserved_memory && machine->device_memory->base) { 978 uint64_t *val = g_malloc(sizeof(*val)); 979 PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); 980 uint64_t res_mem_end = machine->device_memory->base; 981 982 if (!pcmc->broken_reserved_end) { 983 res_mem_end += memory_region_size(&machine->device_memory->mr); 984 } 985 986 if (pcms->cxl_devices_state.is_enabled) { 987 res_mem_end = cxl_resv_end; 988 } 989 *val = cpu_to_le64(ROUND_UP(res_mem_end, 1 * GiB)); 990 fw_cfg_add_file(fw_cfg, "etc/reserved-memory-end", val, sizeof(*val)); 991 } 992 993 if (linux_boot) { 994 x86_load_linux(x86ms, fw_cfg, pcmc->acpi_data_size, 995 pcmc->pvh_enabled); 996 } 997 998 for (i = 0; i < nb_option_roms; i++) { 999 rom_add_option(option_rom[i].name, option_rom[i].bootindex); 1000 } 1001 x86ms->fw_cfg = fw_cfg; 1002 1003 /* Init default IOAPIC address space */ 1004 x86ms->ioapic_as = &address_space_memory; 1005 1006 /* Init ACPI memory hotplug IO base address */ 1007 pcms->memhp_io_base = ACPI_MEMORY_HOTPLUG_BASE; 1008 } 1009 1010 /* 1011 * The 64bit pci hole starts after "above 4G RAM" and 1012 * potentially the space reserved for memory hotplug. 1013 */ 1014 uint64_t pc_pci_hole64_start(void) 1015 { 1016 PCMachineState *pcms = PC_MACHINE(qdev_get_machine()); 1017 PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); 1018 MachineState *ms = MACHINE(pcms); 1019 X86MachineState *x86ms = X86_MACHINE(pcms); 1020 uint64_t hole64_start = 0; 1021 1022 if (pcms->cxl_devices_state.host_mr.addr) { 1023 hole64_start = pcms->cxl_devices_state.host_mr.addr + 1024 memory_region_size(&pcms->cxl_devices_state.host_mr); 1025 if (pcms->cxl_devices_state.fixed_windows) { 1026 GList *it; 1027 for (it = pcms->cxl_devices_state.fixed_windows; it; it = it->next) { 1028 CXLFixedWindow *fw = it->data; 1029 hole64_start = fw->mr.addr + memory_region_size(&fw->mr); 1030 } 1031 } 1032 } else if (pcmc->has_reserved_memory && ms->device_memory->base) { 1033 hole64_start = ms->device_memory->base; 1034 if (!pcmc->broken_reserved_end) { 1035 hole64_start += memory_region_size(&ms->device_memory->mr); 1036 } 1037 } else if (pcms->sgx_epc.size != 0) { 1038 hole64_start = sgx_epc_above_4g_end(&pcms->sgx_epc); 1039 } else { 1040 hole64_start = 0x100000000ULL + x86ms->above_4g_mem_size; 1041 } 1042 1043 return ROUND_UP(hole64_start, 1 * GiB); 1044 } 1045 1046 DeviceState *pc_vga_init(ISABus *isa_bus, PCIBus *pci_bus) 1047 { 1048 DeviceState *dev = NULL; 1049 1050 rom_set_order_override(FW_CFG_ORDER_OVERRIDE_VGA); 1051 if (pci_bus) { 1052 PCIDevice *pcidev = pci_vga_init(pci_bus); 1053 dev = pcidev ? &pcidev->qdev : NULL; 1054 } else if (isa_bus) { 1055 ISADevice *isadev = isa_vga_init(isa_bus); 1056 dev = isadev ? DEVICE(isadev) : NULL; 1057 } 1058 rom_reset_order_override(); 1059 return dev; 1060 } 1061 1062 static const MemoryRegionOps ioport80_io_ops = { 1063 .write = ioport80_write, 1064 .read = ioport80_read, 1065 .endianness = DEVICE_NATIVE_ENDIAN, 1066 .impl = { 1067 .min_access_size = 1, 1068 .max_access_size = 1, 1069 }, 1070 }; 1071 1072 static const MemoryRegionOps ioportF0_io_ops = { 1073 .write = ioportF0_write, 1074 .read = ioportF0_read, 1075 .endianness = DEVICE_NATIVE_ENDIAN, 1076 .impl = { 1077 .min_access_size = 1, 1078 .max_access_size = 1, 1079 }, 1080 }; 1081 1082 static void pc_superio_init(ISABus *isa_bus, bool create_fdctrl, 1083 bool create_i8042, bool no_vmport) 1084 { 1085 int i; 1086 DriveInfo *fd[MAX_FD]; 1087 qemu_irq *a20_line; 1088 ISADevice *fdc, *i8042, *port92, *vmmouse; 1089 1090 serial_hds_isa_init(isa_bus, 0, MAX_ISA_SERIAL_PORTS); 1091 parallel_hds_isa_init(isa_bus, MAX_PARALLEL_PORTS); 1092 1093 for (i = 0; i < MAX_FD; i++) { 1094 fd[i] = drive_get(IF_FLOPPY, 0, i); 1095 create_fdctrl |= !!fd[i]; 1096 } 1097 if (create_fdctrl) { 1098 fdc = isa_new(TYPE_ISA_FDC); 1099 if (fdc) { 1100 isa_realize_and_unref(fdc, isa_bus, &error_fatal); 1101 isa_fdc_init_drives(fdc, fd); 1102 } 1103 } 1104 1105 if (!create_i8042) { 1106 return; 1107 } 1108 1109 i8042 = isa_create_simple(isa_bus, TYPE_I8042); 1110 if (!no_vmport) { 1111 isa_create_simple(isa_bus, TYPE_VMPORT); 1112 vmmouse = isa_try_new("vmmouse"); 1113 } else { 1114 vmmouse = NULL; 1115 } 1116 if (vmmouse) { 1117 object_property_set_link(OBJECT(vmmouse), TYPE_I8042, OBJECT(i8042), 1118 &error_abort); 1119 isa_realize_and_unref(vmmouse, isa_bus, &error_fatal); 1120 } 1121 port92 = isa_create_simple(isa_bus, TYPE_PORT92); 1122 1123 a20_line = qemu_allocate_irqs(handle_a20_line_change, first_cpu, 2); 1124 i8042_setup_a20_line(i8042, a20_line[0]); 1125 qdev_connect_gpio_out_named(DEVICE(port92), 1126 PORT92_A20_LINE, 0, a20_line[1]); 1127 g_free(a20_line); 1128 } 1129 1130 void pc_basic_device_init(struct PCMachineState *pcms, 1131 ISABus *isa_bus, qemu_irq *gsi, 1132 ISADevice **rtc_state, 1133 bool create_fdctrl, 1134 uint32_t hpet_irqs) 1135 { 1136 int i; 1137 DeviceState *hpet = NULL; 1138 int pit_isa_irq = 0; 1139 qemu_irq pit_alt_irq = NULL; 1140 qemu_irq rtc_irq = NULL; 1141 ISADevice *pit = NULL; 1142 MemoryRegion *ioport80_io = g_new(MemoryRegion, 1); 1143 MemoryRegion *ioportF0_io = g_new(MemoryRegion, 1); 1144 X86MachineState *x86ms = X86_MACHINE(pcms); 1145 1146 memory_region_init_io(ioport80_io, NULL, &ioport80_io_ops, NULL, "ioport80", 1); 1147 memory_region_add_subregion(isa_bus->address_space_io, 0x80, ioport80_io); 1148 1149 memory_region_init_io(ioportF0_io, NULL, &ioportF0_io_ops, NULL, "ioportF0", 1); 1150 memory_region_add_subregion(isa_bus->address_space_io, 0xf0, ioportF0_io); 1151 1152 /* 1153 * Check if an HPET shall be created. 1154 * 1155 * Without KVM_CAP_PIT_STATE2, we cannot switch off the in-kernel PIT 1156 * when the HPET wants to take over. Thus we have to disable the latter. 1157 */ 1158 if (pcms->hpet_enabled && (!kvm_irqchip_in_kernel() || 1159 kvm_has_pit_state2())) { 1160 hpet = qdev_try_new(TYPE_HPET); 1161 if (!hpet) { 1162 error_report("couldn't create HPET device"); 1163 exit(1); 1164 } 1165 /* 1166 * For pc-piix-*, hpet's intcap is always IRQ2. For pc-q35-1.7 and 1167 * earlier, use IRQ2 for compat. Otherwise, use IRQ16~23, IRQ8 and 1168 * IRQ2. 1169 */ 1170 uint8_t compat = object_property_get_uint(OBJECT(hpet), 1171 HPET_INTCAP, NULL); 1172 if (!compat) { 1173 qdev_prop_set_uint32(hpet, HPET_INTCAP, hpet_irqs); 1174 } 1175 sysbus_realize_and_unref(SYS_BUS_DEVICE(hpet), &error_fatal); 1176 sysbus_mmio_map(SYS_BUS_DEVICE(hpet), 0, HPET_BASE); 1177 1178 for (i = 0; i < GSI_NUM_PINS; i++) { 1179 sysbus_connect_irq(SYS_BUS_DEVICE(hpet), i, gsi[i]); 1180 } 1181 pit_isa_irq = -1; 1182 pit_alt_irq = qdev_get_gpio_in(hpet, HPET_LEGACY_PIT_INT); 1183 rtc_irq = qdev_get_gpio_in(hpet, HPET_LEGACY_RTC_INT); 1184 } 1185 *rtc_state = mc146818_rtc_init(isa_bus, 2000, rtc_irq); 1186 1187 qemu_register_boot_set(pc_boot_set, *rtc_state); 1188 1189 if (!xen_enabled() && 1190 (x86ms->pit == ON_OFF_AUTO_AUTO || x86ms->pit == ON_OFF_AUTO_ON)) { 1191 if (kvm_pit_in_kernel()) { 1192 pit = kvm_pit_init(isa_bus, 0x40); 1193 } else { 1194 pit = i8254_pit_init(isa_bus, 0x40, pit_isa_irq, pit_alt_irq); 1195 } 1196 if (hpet) { 1197 /* connect PIT to output control line of the HPET */ 1198 qdev_connect_gpio_out(hpet, 0, qdev_get_gpio_in(DEVICE(pit), 0)); 1199 } 1200 pcspk_init(pcms->pcspk, isa_bus, pit); 1201 } 1202 1203 i8257_dma_init(isa_bus, 0); 1204 1205 /* Super I/O */ 1206 pc_superio_init(isa_bus, create_fdctrl, pcms->i8042_enabled, 1207 pcms->vmport != ON_OFF_AUTO_ON); 1208 } 1209 1210 void pc_nic_init(PCMachineClass *pcmc, ISABus *isa_bus, PCIBus *pci_bus) 1211 { 1212 int i; 1213 1214 rom_set_order_override(FW_CFG_ORDER_OVERRIDE_NIC); 1215 for (i = 0; i < nb_nics; i++) { 1216 NICInfo *nd = &nd_table[i]; 1217 const char *model = nd->model ? nd->model : pcmc->default_nic_model; 1218 1219 if (g_str_equal(model, "ne2k_isa")) { 1220 pc_init_ne2k_isa(isa_bus, nd); 1221 } else { 1222 pci_nic_init_nofail(nd, pci_bus, model, NULL); 1223 } 1224 } 1225 rom_reset_order_override(); 1226 } 1227 1228 void pc_i8259_create(ISABus *isa_bus, qemu_irq *i8259_irqs) 1229 { 1230 qemu_irq *i8259; 1231 1232 if (kvm_pic_in_kernel()) { 1233 i8259 = kvm_i8259_init(isa_bus); 1234 } else if (xen_enabled()) { 1235 i8259 = xen_interrupt_controller_init(); 1236 } else { 1237 i8259 = i8259_init(isa_bus, x86_allocate_cpu_irq()); 1238 } 1239 1240 for (size_t i = 0; i < ISA_NUM_IRQS; i++) { 1241 i8259_irqs[i] = i8259[i]; 1242 } 1243 1244 g_free(i8259); 1245 } 1246 1247 static void pc_memory_pre_plug(HotplugHandler *hotplug_dev, DeviceState *dev, 1248 Error **errp) 1249 { 1250 const PCMachineState *pcms = PC_MACHINE(hotplug_dev); 1251 const X86MachineState *x86ms = X86_MACHINE(hotplug_dev); 1252 const PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); 1253 const MachineState *ms = MACHINE(hotplug_dev); 1254 const bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM); 1255 const uint64_t legacy_align = TARGET_PAGE_SIZE; 1256 Error *local_err = NULL; 1257 1258 /* 1259 * When -no-acpi is used with Q35 machine type, no ACPI is built, 1260 * but pcms->acpi_dev is still created. Check !acpi_enabled in 1261 * addition to cover this case. 1262 */ 1263 if (!x86ms->acpi_dev || !x86_machine_is_acpi_enabled(x86ms)) { 1264 error_setg(errp, 1265 "memory hotplug is not enabled: missing acpi device or acpi disabled"); 1266 return; 1267 } 1268 1269 if (is_nvdimm && !ms->nvdimms_state->is_enabled) { 1270 error_setg(errp, "nvdimm is not enabled: missing 'nvdimm' in '-M'"); 1271 return; 1272 } 1273 1274 hotplug_handler_pre_plug(x86ms->acpi_dev, dev, &local_err); 1275 if (local_err) { 1276 error_propagate(errp, local_err); 1277 return; 1278 } 1279 1280 pc_dimm_pre_plug(PC_DIMM(dev), MACHINE(hotplug_dev), 1281 pcmc->enforce_aligned_dimm ? NULL : &legacy_align, errp); 1282 } 1283 1284 static void pc_memory_plug(HotplugHandler *hotplug_dev, 1285 DeviceState *dev, Error **errp) 1286 { 1287 PCMachineState *pcms = PC_MACHINE(hotplug_dev); 1288 X86MachineState *x86ms = X86_MACHINE(hotplug_dev); 1289 MachineState *ms = MACHINE(hotplug_dev); 1290 bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM); 1291 1292 pc_dimm_plug(PC_DIMM(dev), MACHINE(pcms)); 1293 1294 if (is_nvdimm) { 1295 nvdimm_plug(ms->nvdimms_state); 1296 } 1297 1298 hotplug_handler_plug(x86ms->acpi_dev, dev, &error_abort); 1299 } 1300 1301 static void pc_memory_unplug_request(HotplugHandler *hotplug_dev, 1302 DeviceState *dev, Error **errp) 1303 { 1304 X86MachineState *x86ms = X86_MACHINE(hotplug_dev); 1305 1306 /* 1307 * When -no-acpi is used with Q35 machine type, no ACPI is built, 1308 * but pcms->acpi_dev is still created. Check !acpi_enabled in 1309 * addition to cover this case. 1310 */ 1311 if (!x86ms->acpi_dev || !x86_machine_is_acpi_enabled(x86ms)) { 1312 error_setg(errp, 1313 "memory hotplug is not enabled: missing acpi device or acpi disabled"); 1314 return; 1315 } 1316 1317 if (object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM)) { 1318 error_setg(errp, "nvdimm device hot unplug is not supported yet."); 1319 return; 1320 } 1321 1322 hotplug_handler_unplug_request(x86ms->acpi_dev, dev, 1323 errp); 1324 } 1325 1326 static void pc_memory_unplug(HotplugHandler *hotplug_dev, 1327 DeviceState *dev, Error **errp) 1328 { 1329 PCMachineState *pcms = PC_MACHINE(hotplug_dev); 1330 X86MachineState *x86ms = X86_MACHINE(hotplug_dev); 1331 Error *local_err = NULL; 1332 1333 hotplug_handler_unplug(x86ms->acpi_dev, dev, &local_err); 1334 if (local_err) { 1335 goto out; 1336 } 1337 1338 pc_dimm_unplug(PC_DIMM(dev), MACHINE(pcms)); 1339 qdev_unrealize(dev); 1340 out: 1341 error_propagate(errp, local_err); 1342 } 1343 1344 static void pc_virtio_md_pci_pre_plug(HotplugHandler *hotplug_dev, 1345 DeviceState *dev, Error **errp) 1346 { 1347 HotplugHandler *hotplug_dev2 = qdev_get_bus_hotplug_handler(dev); 1348 Error *local_err = NULL; 1349 1350 if (!hotplug_dev2 && dev->hotplugged) { 1351 /* 1352 * Without a bus hotplug handler, we cannot control the plug/unplug 1353 * order. We should never reach this point when hotplugging on x86, 1354 * however, better add a safety net. 1355 */ 1356 error_setg(errp, "hotplug of virtio based memory devices not supported" 1357 " on this bus."); 1358 return; 1359 } 1360 /* 1361 * First, see if we can plug this memory device at all. If that 1362 * succeeds, branch of to the actual hotplug handler. 1363 */ 1364 memory_device_pre_plug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev), NULL, 1365 &local_err); 1366 if (!local_err && hotplug_dev2) { 1367 hotplug_handler_pre_plug(hotplug_dev2, dev, &local_err); 1368 } 1369 error_propagate(errp, local_err); 1370 } 1371 1372 static void pc_virtio_md_pci_plug(HotplugHandler *hotplug_dev, 1373 DeviceState *dev, Error **errp) 1374 { 1375 HotplugHandler *hotplug_dev2 = qdev_get_bus_hotplug_handler(dev); 1376 Error *local_err = NULL; 1377 1378 /* 1379 * Plug the memory device first and then branch off to the actual 1380 * hotplug handler. If that one fails, we can easily undo the memory 1381 * device bits. 1382 */ 1383 memory_device_plug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev)); 1384 if (hotplug_dev2) { 1385 hotplug_handler_plug(hotplug_dev2, dev, &local_err); 1386 if (local_err) { 1387 memory_device_unplug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev)); 1388 } 1389 } 1390 error_propagate(errp, local_err); 1391 } 1392 1393 static void pc_virtio_md_pci_unplug_request(HotplugHandler *hotplug_dev, 1394 DeviceState *dev, Error **errp) 1395 { 1396 /* We don't support hot unplug of virtio based memory devices */ 1397 error_setg(errp, "virtio based memory devices cannot be unplugged."); 1398 } 1399 1400 static void pc_virtio_md_pci_unplug(HotplugHandler *hotplug_dev, 1401 DeviceState *dev, Error **errp) 1402 { 1403 /* We don't support hot unplug of virtio based memory devices */ 1404 } 1405 1406 static void pc_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev, 1407 DeviceState *dev, Error **errp) 1408 { 1409 if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { 1410 pc_memory_pre_plug(hotplug_dev, dev, errp); 1411 } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { 1412 x86_cpu_pre_plug(hotplug_dev, dev, errp); 1413 } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI) || 1414 object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_MEM_PCI)) { 1415 pc_virtio_md_pci_pre_plug(hotplug_dev, dev, errp); 1416 } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_IOMMU_PCI)) { 1417 /* Declare the APIC range as the reserved MSI region */ 1418 char *resv_prop_str = g_strdup_printf("0xfee00000:0xfeefffff:%d", 1419 VIRTIO_IOMMU_RESV_MEM_T_MSI); 1420 1421 object_property_set_uint(OBJECT(dev), "len-reserved-regions", 1, errp); 1422 object_property_set_str(OBJECT(dev), "reserved-regions[0]", 1423 resv_prop_str, errp); 1424 g_free(resv_prop_str); 1425 } 1426 1427 if (object_dynamic_cast(OBJECT(dev), TYPE_X86_IOMMU_DEVICE) || 1428 object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_IOMMU_PCI)) { 1429 PCMachineState *pcms = PC_MACHINE(hotplug_dev); 1430 1431 if (pcms->iommu) { 1432 error_setg(errp, "QEMU does not support multiple vIOMMUs " 1433 "for x86 yet."); 1434 return; 1435 } 1436 pcms->iommu = dev; 1437 } 1438 } 1439 1440 static void pc_machine_device_plug_cb(HotplugHandler *hotplug_dev, 1441 DeviceState *dev, Error **errp) 1442 { 1443 if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { 1444 pc_memory_plug(hotplug_dev, dev, errp); 1445 } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { 1446 x86_cpu_plug(hotplug_dev, dev, errp); 1447 } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI) || 1448 object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_MEM_PCI)) { 1449 pc_virtio_md_pci_plug(hotplug_dev, dev, errp); 1450 } 1451 } 1452 1453 static void pc_machine_device_unplug_request_cb(HotplugHandler *hotplug_dev, 1454 DeviceState *dev, Error **errp) 1455 { 1456 if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { 1457 pc_memory_unplug_request(hotplug_dev, dev, errp); 1458 } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { 1459 x86_cpu_unplug_request_cb(hotplug_dev, dev, errp); 1460 } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI) || 1461 object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_MEM_PCI)) { 1462 pc_virtio_md_pci_unplug_request(hotplug_dev, dev, errp); 1463 } else { 1464 error_setg(errp, "acpi: device unplug request for not supported device" 1465 " type: %s", object_get_typename(OBJECT(dev))); 1466 } 1467 } 1468 1469 static void pc_machine_device_unplug_cb(HotplugHandler *hotplug_dev, 1470 DeviceState *dev, Error **errp) 1471 { 1472 if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { 1473 pc_memory_unplug(hotplug_dev, dev, errp); 1474 } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { 1475 x86_cpu_unplug_cb(hotplug_dev, dev, errp); 1476 } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI) || 1477 object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_MEM_PCI)) { 1478 pc_virtio_md_pci_unplug(hotplug_dev, dev, errp); 1479 } else { 1480 error_setg(errp, "acpi: device unplug for not supported device" 1481 " type: %s", object_get_typename(OBJECT(dev))); 1482 } 1483 } 1484 1485 static HotplugHandler *pc_get_hotplug_handler(MachineState *machine, 1486 DeviceState *dev) 1487 { 1488 if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM) || 1489 object_dynamic_cast(OBJECT(dev), TYPE_CPU) || 1490 object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI) || 1491 object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_MEM_PCI) || 1492 object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_IOMMU_PCI) || 1493 object_dynamic_cast(OBJECT(dev), TYPE_X86_IOMMU_DEVICE)) { 1494 return HOTPLUG_HANDLER(machine); 1495 } 1496 1497 return NULL; 1498 } 1499 1500 static void 1501 pc_machine_get_device_memory_region_size(Object *obj, Visitor *v, 1502 const char *name, void *opaque, 1503 Error **errp) 1504 { 1505 MachineState *ms = MACHINE(obj); 1506 int64_t value = 0; 1507 1508 if (ms->device_memory) { 1509 value = memory_region_size(&ms->device_memory->mr); 1510 } 1511 1512 visit_type_int(v, name, &value, errp); 1513 } 1514 1515 static void pc_machine_get_vmport(Object *obj, Visitor *v, const char *name, 1516 void *opaque, Error **errp) 1517 { 1518 PCMachineState *pcms = PC_MACHINE(obj); 1519 OnOffAuto vmport = pcms->vmport; 1520 1521 visit_type_OnOffAuto(v, name, &vmport, errp); 1522 } 1523 1524 static void pc_machine_set_vmport(Object *obj, Visitor *v, const char *name, 1525 void *opaque, Error **errp) 1526 { 1527 PCMachineState *pcms = PC_MACHINE(obj); 1528 1529 visit_type_OnOffAuto(v, name, &pcms->vmport, errp); 1530 } 1531 1532 static bool pc_machine_get_smbus(Object *obj, Error **errp) 1533 { 1534 PCMachineState *pcms = PC_MACHINE(obj); 1535 1536 return pcms->smbus_enabled; 1537 } 1538 1539 static void pc_machine_set_smbus(Object *obj, bool value, Error **errp) 1540 { 1541 PCMachineState *pcms = PC_MACHINE(obj); 1542 1543 pcms->smbus_enabled = value; 1544 } 1545 1546 static bool pc_machine_get_sata(Object *obj, Error **errp) 1547 { 1548 PCMachineState *pcms = PC_MACHINE(obj); 1549 1550 return pcms->sata_enabled; 1551 } 1552 1553 static void pc_machine_set_sata(Object *obj, bool value, Error **errp) 1554 { 1555 PCMachineState *pcms = PC_MACHINE(obj); 1556 1557 pcms->sata_enabled = value; 1558 } 1559 1560 static bool pc_machine_get_hpet(Object *obj, Error **errp) 1561 { 1562 PCMachineState *pcms = PC_MACHINE(obj); 1563 1564 return pcms->hpet_enabled; 1565 } 1566 1567 static void pc_machine_set_hpet(Object *obj, bool value, Error **errp) 1568 { 1569 PCMachineState *pcms = PC_MACHINE(obj); 1570 1571 pcms->hpet_enabled = value; 1572 } 1573 1574 static bool pc_machine_get_i8042(Object *obj, Error **errp) 1575 { 1576 PCMachineState *pcms = PC_MACHINE(obj); 1577 1578 return pcms->i8042_enabled; 1579 } 1580 1581 static void pc_machine_set_i8042(Object *obj, bool value, Error **errp) 1582 { 1583 PCMachineState *pcms = PC_MACHINE(obj); 1584 1585 pcms->i8042_enabled = value; 1586 } 1587 1588 static bool pc_machine_get_default_bus_bypass_iommu(Object *obj, Error **errp) 1589 { 1590 PCMachineState *pcms = PC_MACHINE(obj); 1591 1592 return pcms->default_bus_bypass_iommu; 1593 } 1594 1595 static void pc_machine_set_default_bus_bypass_iommu(Object *obj, bool value, 1596 Error **errp) 1597 { 1598 PCMachineState *pcms = PC_MACHINE(obj); 1599 1600 pcms->default_bus_bypass_iommu = value; 1601 } 1602 1603 static void pc_machine_get_smbios_ep(Object *obj, Visitor *v, const char *name, 1604 void *opaque, Error **errp) 1605 { 1606 PCMachineState *pcms = PC_MACHINE(obj); 1607 SmbiosEntryPointType smbios_entry_point_type = pcms->smbios_entry_point_type; 1608 1609 visit_type_SmbiosEntryPointType(v, name, &smbios_entry_point_type, errp); 1610 } 1611 1612 static void pc_machine_set_smbios_ep(Object *obj, Visitor *v, const char *name, 1613 void *opaque, Error **errp) 1614 { 1615 PCMachineState *pcms = PC_MACHINE(obj); 1616 1617 visit_type_SmbiosEntryPointType(v, name, &pcms->smbios_entry_point_type, errp); 1618 } 1619 1620 static void pc_machine_get_max_ram_below_4g(Object *obj, Visitor *v, 1621 const char *name, void *opaque, 1622 Error **errp) 1623 { 1624 PCMachineState *pcms = PC_MACHINE(obj); 1625 uint64_t value = pcms->max_ram_below_4g; 1626 1627 visit_type_size(v, name, &value, errp); 1628 } 1629 1630 static void pc_machine_set_max_ram_below_4g(Object *obj, Visitor *v, 1631 const char *name, void *opaque, 1632 Error **errp) 1633 { 1634 PCMachineState *pcms = PC_MACHINE(obj); 1635 uint64_t value; 1636 1637 if (!visit_type_size(v, name, &value, errp)) { 1638 return; 1639 } 1640 if (value > 4 * GiB) { 1641 error_setg(errp, 1642 "Machine option 'max-ram-below-4g=%"PRIu64 1643 "' expects size less than or equal to 4G", value); 1644 return; 1645 } 1646 1647 if (value < 1 * MiB) { 1648 warn_report("Only %" PRIu64 " bytes of RAM below the 4GiB boundary," 1649 "BIOS may not work with less than 1MiB", value); 1650 } 1651 1652 pcms->max_ram_below_4g = value; 1653 } 1654 1655 static void pc_machine_get_max_fw_size(Object *obj, Visitor *v, 1656 const char *name, void *opaque, 1657 Error **errp) 1658 { 1659 PCMachineState *pcms = PC_MACHINE(obj); 1660 uint64_t value = pcms->max_fw_size; 1661 1662 visit_type_size(v, name, &value, errp); 1663 } 1664 1665 static void pc_machine_set_max_fw_size(Object *obj, Visitor *v, 1666 const char *name, void *opaque, 1667 Error **errp) 1668 { 1669 PCMachineState *pcms = PC_MACHINE(obj); 1670 Error *error = NULL; 1671 uint64_t value; 1672 1673 visit_type_size(v, name, &value, &error); 1674 if (error) { 1675 error_propagate(errp, error); 1676 return; 1677 } 1678 1679 /* 1680 * We don't have a theoretically justifiable exact lower bound on the base 1681 * address of any flash mapping. In practice, the IO-APIC MMIO range is 1682 * [0xFEE00000..0xFEE01000] -- see IO_APIC_DEFAULT_ADDRESS --, leaving free 1683 * only 18MB-4KB below 4G. For now, restrict the cumulative mapping to 8MB in 1684 * size. 1685 */ 1686 if (value > 16 * MiB) { 1687 error_setg(errp, 1688 "User specified max allowed firmware size %" PRIu64 " is " 1689 "greater than 16MiB. If combined firwmare size exceeds " 1690 "16MiB the system may not boot, or experience intermittent" 1691 "stability issues.", 1692 value); 1693 return; 1694 } 1695 1696 pcms->max_fw_size = value; 1697 } 1698 1699 1700 static void pc_machine_initfn(Object *obj) 1701 { 1702 PCMachineState *pcms = PC_MACHINE(obj); 1703 1704 #ifdef CONFIG_VMPORT 1705 pcms->vmport = ON_OFF_AUTO_AUTO; 1706 #else 1707 pcms->vmport = ON_OFF_AUTO_OFF; 1708 #endif /* CONFIG_VMPORT */ 1709 pcms->max_ram_below_4g = 0; /* use default */ 1710 pcms->smbios_entry_point_type = SMBIOS_ENTRY_POINT_TYPE_32; 1711 1712 /* acpi build is enabled by default if machine supports it */ 1713 pcms->acpi_build_enabled = PC_MACHINE_GET_CLASS(pcms)->has_acpi_build; 1714 pcms->smbus_enabled = true; 1715 pcms->sata_enabled = true; 1716 pcms->i8042_enabled = true; 1717 pcms->max_fw_size = 8 * MiB; 1718 #ifdef CONFIG_HPET 1719 pcms->hpet_enabled = true; 1720 #endif 1721 pcms->default_bus_bypass_iommu = false; 1722 1723 pc_system_flash_create(pcms); 1724 pcms->pcspk = isa_new(TYPE_PC_SPEAKER); 1725 object_property_add_alias(OBJECT(pcms), "pcspk-audiodev", 1726 OBJECT(pcms->pcspk), "audiodev"); 1727 cxl_machine_init(obj, &pcms->cxl_devices_state); 1728 } 1729 1730 static void pc_machine_reset(MachineState *machine) 1731 { 1732 CPUState *cs; 1733 X86CPU *cpu; 1734 1735 qemu_devices_reset(); 1736 1737 /* Reset APIC after devices have been reset to cancel 1738 * any changes that qemu_devices_reset() might have done. 1739 */ 1740 CPU_FOREACH(cs) { 1741 cpu = X86_CPU(cs); 1742 1743 if (cpu->apic_state) { 1744 device_legacy_reset(cpu->apic_state); 1745 } 1746 } 1747 } 1748 1749 static void pc_machine_wakeup(MachineState *machine) 1750 { 1751 cpu_synchronize_all_states(); 1752 pc_machine_reset(machine); 1753 cpu_synchronize_all_post_reset(); 1754 } 1755 1756 static bool pc_hotplug_allowed(MachineState *ms, DeviceState *dev, Error **errp) 1757 { 1758 X86IOMMUState *iommu = x86_iommu_get_default(); 1759 IntelIOMMUState *intel_iommu; 1760 1761 if (iommu && 1762 object_dynamic_cast((Object *)iommu, TYPE_INTEL_IOMMU_DEVICE) && 1763 object_dynamic_cast((Object *)dev, "vfio-pci")) { 1764 intel_iommu = INTEL_IOMMU_DEVICE(iommu); 1765 if (!intel_iommu->caching_mode) { 1766 error_setg(errp, "Device assignment is not allowed without " 1767 "enabling caching-mode=on for Intel IOMMU."); 1768 return false; 1769 } 1770 } 1771 1772 return true; 1773 } 1774 1775 static void pc_machine_class_init(ObjectClass *oc, void *data) 1776 { 1777 MachineClass *mc = MACHINE_CLASS(oc); 1778 PCMachineClass *pcmc = PC_MACHINE_CLASS(oc); 1779 HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(oc); 1780 1781 pcmc->pci_enabled = true; 1782 pcmc->has_acpi_build = true; 1783 pcmc->rsdp_in_ram = true; 1784 pcmc->smbios_defaults = true; 1785 pcmc->smbios_uuid_encoded = true; 1786 pcmc->gigabyte_align = true; 1787 pcmc->has_reserved_memory = true; 1788 pcmc->kvmclock_enabled = true; 1789 pcmc->enforce_aligned_dimm = true; 1790 /* BIOS ACPI tables: 128K. Other BIOS datastructures: less than 4K reported 1791 * to be used at the moment, 32K should be enough for a while. */ 1792 pcmc->acpi_data_size = 0x20000 + 0x8000; 1793 pcmc->pvh_enabled = true; 1794 pcmc->kvmclock_create_always = true; 1795 assert(!mc->get_hotplug_handler); 1796 mc->get_hotplug_handler = pc_get_hotplug_handler; 1797 mc->hotplug_allowed = pc_hotplug_allowed; 1798 mc->cpu_index_to_instance_props = x86_cpu_index_to_props; 1799 mc->get_default_cpu_node_id = x86_get_default_cpu_node_id; 1800 mc->possible_cpu_arch_ids = x86_possible_cpu_arch_ids; 1801 mc->auto_enable_numa_with_memhp = true; 1802 mc->auto_enable_numa_with_memdev = true; 1803 mc->has_hotpluggable_cpus = true; 1804 mc->default_boot_order = "cad"; 1805 mc->block_default_type = IF_IDE; 1806 mc->max_cpus = 255; 1807 mc->reset = pc_machine_reset; 1808 mc->wakeup = pc_machine_wakeup; 1809 hc->pre_plug = pc_machine_device_pre_plug_cb; 1810 hc->plug = pc_machine_device_plug_cb; 1811 hc->unplug_request = pc_machine_device_unplug_request_cb; 1812 hc->unplug = pc_machine_device_unplug_cb; 1813 mc->default_cpu_type = TARGET_DEFAULT_CPU_TYPE; 1814 mc->nvdimm_supported = true; 1815 mc->smp_props.dies_supported = true; 1816 mc->default_ram_id = "pc.ram"; 1817 1818 object_class_property_add(oc, PC_MACHINE_MAX_RAM_BELOW_4G, "size", 1819 pc_machine_get_max_ram_below_4g, pc_machine_set_max_ram_below_4g, 1820 NULL, NULL); 1821 object_class_property_set_description(oc, PC_MACHINE_MAX_RAM_BELOW_4G, 1822 "Maximum ram below the 4G boundary (32bit boundary)"); 1823 1824 object_class_property_add(oc, PC_MACHINE_DEVMEM_REGION_SIZE, "int", 1825 pc_machine_get_device_memory_region_size, NULL, 1826 NULL, NULL); 1827 1828 object_class_property_add(oc, PC_MACHINE_VMPORT, "OnOffAuto", 1829 pc_machine_get_vmport, pc_machine_set_vmport, 1830 NULL, NULL); 1831 object_class_property_set_description(oc, PC_MACHINE_VMPORT, 1832 "Enable vmport (pc & q35)"); 1833 1834 object_class_property_add_bool(oc, PC_MACHINE_SMBUS, 1835 pc_machine_get_smbus, pc_machine_set_smbus); 1836 object_class_property_set_description(oc, PC_MACHINE_SMBUS, 1837 "Enable/disable system management bus"); 1838 1839 object_class_property_add_bool(oc, PC_MACHINE_SATA, 1840 pc_machine_get_sata, pc_machine_set_sata); 1841 object_class_property_set_description(oc, PC_MACHINE_SATA, 1842 "Enable/disable Serial ATA bus"); 1843 1844 object_class_property_add_bool(oc, "hpet", 1845 pc_machine_get_hpet, pc_machine_set_hpet); 1846 object_class_property_set_description(oc, "hpet", 1847 "Enable/disable high precision event timer emulation"); 1848 1849 object_class_property_add_bool(oc, PC_MACHINE_I8042, 1850 pc_machine_get_i8042, pc_machine_set_i8042); 1851 1852 object_class_property_add_bool(oc, "default-bus-bypass-iommu", 1853 pc_machine_get_default_bus_bypass_iommu, 1854 pc_machine_set_default_bus_bypass_iommu); 1855 1856 object_class_property_add(oc, PC_MACHINE_MAX_FW_SIZE, "size", 1857 pc_machine_get_max_fw_size, pc_machine_set_max_fw_size, 1858 NULL, NULL); 1859 object_class_property_set_description(oc, PC_MACHINE_MAX_FW_SIZE, 1860 "Maximum combined firmware size"); 1861 1862 object_class_property_add(oc, PC_MACHINE_SMBIOS_EP, "str", 1863 pc_machine_get_smbios_ep, pc_machine_set_smbios_ep, 1864 NULL, NULL); 1865 object_class_property_set_description(oc, PC_MACHINE_SMBIOS_EP, 1866 "SMBIOS Entry Point type [32, 64]"); 1867 } 1868 1869 static const TypeInfo pc_machine_info = { 1870 .name = TYPE_PC_MACHINE, 1871 .parent = TYPE_X86_MACHINE, 1872 .abstract = true, 1873 .instance_size = sizeof(PCMachineState), 1874 .instance_init = pc_machine_initfn, 1875 .class_size = sizeof(PCMachineClass), 1876 .class_init = pc_machine_class_init, 1877 .interfaces = (InterfaceInfo[]) { 1878 { TYPE_HOTPLUG_HANDLER }, 1879 { } 1880 }, 1881 }; 1882 1883 static void pc_machine_register_types(void) 1884 { 1885 type_register_static(&pc_machine_info); 1886 } 1887 1888 type_init(pc_machine_register_types) 1889