1 /* 2 * QEMU PC System Emulator 3 * 4 * Copyright (c) 2003-2004 Fabrice Bellard 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a copy 7 * of this software and associated documentation files (the "Software"), to deal 8 * in the Software without restriction, including without limitation the rights 9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 * copies of the Software, and to permit persons to whom the Software is 11 * furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice shall be included in 14 * all copies or substantial portions of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 22 * THE SOFTWARE. 23 */ 24 25 #include "qemu/osdep.h" 26 #include "qemu/units.h" 27 #include "hw/i386/x86.h" 28 #include "hw/i386/pc.h" 29 #include "hw/char/serial.h" 30 #include "hw/char/parallel.h" 31 #include "hw/i386/apic.h" 32 #include "hw/i386/topology.h" 33 #include "hw/i386/fw_cfg.h" 34 #include "hw/i386/vmport.h" 35 #include "sysemu/cpus.h" 36 #include "hw/block/fdc.h" 37 #include "hw/ide.h" 38 #include "hw/pci/pci.h" 39 #include "hw/pci/pci_bus.h" 40 #include "hw/nvram/fw_cfg.h" 41 #include "hw/timer/hpet.h" 42 #include "hw/firmware/smbios.h" 43 #include "hw/loader.h" 44 #include "elf.h" 45 #include "migration/vmstate.h" 46 #include "multiboot.h" 47 #include "hw/rtc/mc146818rtc.h" 48 #include "hw/intc/i8259.h" 49 #include "hw/dma/i8257.h" 50 #include "hw/timer/i8254.h" 51 #include "hw/input/i8042.h" 52 #include "hw/irq.h" 53 #include "hw/audio/pcspk.h" 54 #include "hw/pci/msi.h" 55 #include "hw/sysbus.h" 56 #include "sysemu/sysemu.h" 57 #include "sysemu/tcg.h" 58 #include "sysemu/numa.h" 59 #include "sysemu/kvm.h" 60 #include "sysemu/xen.h" 61 #include "sysemu/reset.h" 62 #include "sysemu/runstate.h" 63 #include "kvm/kvm_i386.h" 64 #include "hw/xen/xen.h" 65 #include "hw/xen/start_info.h" 66 #include "ui/qemu-spice.h" 67 #include "exec/memory.h" 68 #include "qemu/bitmap.h" 69 #include "qemu/config-file.h" 70 #include "qemu/error-report.h" 71 #include "qemu/option.h" 72 #include "qemu/cutils.h" 73 #include "hw/acpi/acpi.h" 74 #include "hw/acpi/cpu_hotplug.h" 75 #include "acpi-build.h" 76 #include "hw/mem/pc-dimm.h" 77 #include "hw/mem/nvdimm.h" 78 #include "qapi/error.h" 79 #include "qapi/qapi-visit-common.h" 80 #include "qapi/visitor.h" 81 #include "hw/core/cpu.h" 82 #include "hw/usb.h" 83 #include "hw/i386/intel_iommu.h" 84 #include "hw/net/ne2000-isa.h" 85 #include "standard-headers/asm-x86/bootparam.h" 86 #include "hw/virtio/virtio-pmem-pci.h" 87 #include "hw/virtio/virtio-mem-pci.h" 88 #include "hw/mem/memory-device.h" 89 #include "sysemu/replay.h" 90 #include "qapi/qmp/qerror.h" 91 #include "e820_memory_layout.h" 92 #include "fw_cfg.h" 93 #include "trace.h" 94 #include CONFIG_DEVICES 95 96 GlobalProperty pc_compat_6_1[] = {}; 97 const size_t pc_compat_6_1_len = G_N_ELEMENTS(pc_compat_6_1); 98 99 GlobalProperty pc_compat_6_0[] = { 100 { "qemu64" "-" TYPE_X86_CPU, "family", "6" }, 101 { "qemu64" "-" TYPE_X86_CPU, "model", "6" }, 102 { "qemu64" "-" TYPE_X86_CPU, "stepping", "3" }, 103 { TYPE_X86_CPU, "x-vendor-cpuid-only", "off" }, 104 { "ICH9-LPC", ACPI_PM_PROP_ACPI_PCIHP_BRIDGE, "off" }, 105 }; 106 const size_t pc_compat_6_0_len = G_N_ELEMENTS(pc_compat_6_0); 107 108 GlobalProperty pc_compat_5_2[] = { 109 { "ICH9-LPC", "x-smi-cpu-hotunplug", "off" }, 110 }; 111 const size_t pc_compat_5_2_len = G_N_ELEMENTS(pc_compat_5_2); 112 113 GlobalProperty pc_compat_5_1[] = { 114 { "ICH9-LPC", "x-smi-cpu-hotplug", "off" }, 115 { TYPE_X86_CPU, "kvm-msi-ext-dest-id", "off" }, 116 }; 117 const size_t pc_compat_5_1_len = G_N_ELEMENTS(pc_compat_5_1); 118 119 GlobalProperty pc_compat_5_0[] = { 120 }; 121 const size_t pc_compat_5_0_len = G_N_ELEMENTS(pc_compat_5_0); 122 123 GlobalProperty pc_compat_4_2[] = { 124 { "mch", "smbase-smram", "off" }, 125 }; 126 const size_t pc_compat_4_2_len = G_N_ELEMENTS(pc_compat_4_2); 127 128 GlobalProperty pc_compat_4_1[] = {}; 129 const size_t pc_compat_4_1_len = G_N_ELEMENTS(pc_compat_4_1); 130 131 GlobalProperty pc_compat_4_0[] = {}; 132 const size_t pc_compat_4_0_len = G_N_ELEMENTS(pc_compat_4_0); 133 134 GlobalProperty pc_compat_3_1[] = { 135 { "intel-iommu", "dma-drain", "off" }, 136 { "Opteron_G3" "-" TYPE_X86_CPU, "rdtscp", "off" }, 137 { "Opteron_G4" "-" TYPE_X86_CPU, "rdtscp", "off" }, 138 { "Opteron_G4" "-" TYPE_X86_CPU, "npt", "off" }, 139 { "Opteron_G4" "-" TYPE_X86_CPU, "nrip-save", "off" }, 140 { "Opteron_G5" "-" TYPE_X86_CPU, "rdtscp", "off" }, 141 { "Opteron_G5" "-" TYPE_X86_CPU, "npt", "off" }, 142 { "Opteron_G5" "-" TYPE_X86_CPU, "nrip-save", "off" }, 143 { "EPYC" "-" TYPE_X86_CPU, "npt", "off" }, 144 { "EPYC" "-" TYPE_X86_CPU, "nrip-save", "off" }, 145 { "EPYC-IBPB" "-" TYPE_X86_CPU, "npt", "off" }, 146 { "EPYC-IBPB" "-" TYPE_X86_CPU, "nrip-save", "off" }, 147 { "Skylake-Client" "-" TYPE_X86_CPU, "mpx", "on" }, 148 { "Skylake-Client-IBRS" "-" TYPE_X86_CPU, "mpx", "on" }, 149 { "Skylake-Server" "-" TYPE_X86_CPU, "mpx", "on" }, 150 { "Skylake-Server-IBRS" "-" TYPE_X86_CPU, "mpx", "on" }, 151 { "Cascadelake-Server" "-" TYPE_X86_CPU, "mpx", "on" }, 152 { "Icelake-Client" "-" TYPE_X86_CPU, "mpx", "on" }, 153 { "Icelake-Server" "-" TYPE_X86_CPU, "mpx", "on" }, 154 { "Cascadelake-Server" "-" TYPE_X86_CPU, "stepping", "5" }, 155 { TYPE_X86_CPU, "x-intel-pt-auto-level", "off" }, 156 }; 157 const size_t pc_compat_3_1_len = G_N_ELEMENTS(pc_compat_3_1); 158 159 GlobalProperty pc_compat_3_0[] = { 160 { TYPE_X86_CPU, "x-hv-synic-kvm-only", "on" }, 161 { "Skylake-Server" "-" TYPE_X86_CPU, "pku", "off" }, 162 { "Skylake-Server-IBRS" "-" TYPE_X86_CPU, "pku", "off" }, 163 }; 164 const size_t pc_compat_3_0_len = G_N_ELEMENTS(pc_compat_3_0); 165 166 GlobalProperty pc_compat_2_12[] = { 167 { TYPE_X86_CPU, "legacy-cache", "on" }, 168 { TYPE_X86_CPU, "topoext", "off" }, 169 { "EPYC-" TYPE_X86_CPU, "xlevel", "0x8000000a" }, 170 { "EPYC-IBPB-" TYPE_X86_CPU, "xlevel", "0x8000000a" }, 171 }; 172 const size_t pc_compat_2_12_len = G_N_ELEMENTS(pc_compat_2_12); 173 174 GlobalProperty pc_compat_2_11[] = { 175 { TYPE_X86_CPU, "x-migrate-smi-count", "off" }, 176 { "Skylake-Server" "-" TYPE_X86_CPU, "clflushopt", "off" }, 177 }; 178 const size_t pc_compat_2_11_len = G_N_ELEMENTS(pc_compat_2_11); 179 180 GlobalProperty pc_compat_2_10[] = { 181 { TYPE_X86_CPU, "x-hv-max-vps", "0x40" }, 182 { "i440FX-pcihost", "x-pci-hole64-fix", "off" }, 183 { "q35-pcihost", "x-pci-hole64-fix", "off" }, 184 }; 185 const size_t pc_compat_2_10_len = G_N_ELEMENTS(pc_compat_2_10); 186 187 GlobalProperty pc_compat_2_9[] = { 188 { "mch", "extended-tseg-mbytes", "0" }, 189 }; 190 const size_t pc_compat_2_9_len = G_N_ELEMENTS(pc_compat_2_9); 191 192 GlobalProperty pc_compat_2_8[] = { 193 { TYPE_X86_CPU, "tcg-cpuid", "off" }, 194 { "kvmclock", "x-mach-use-reliable-get-clock", "off" }, 195 { "ICH9-LPC", "x-smi-broadcast", "off" }, 196 { TYPE_X86_CPU, "vmware-cpuid-freq", "off" }, 197 { "Haswell-" TYPE_X86_CPU, "stepping", "1" }, 198 }; 199 const size_t pc_compat_2_8_len = G_N_ELEMENTS(pc_compat_2_8); 200 201 GlobalProperty pc_compat_2_7[] = { 202 { TYPE_X86_CPU, "l3-cache", "off" }, 203 { TYPE_X86_CPU, "full-cpuid-auto-level", "off" }, 204 { "Opteron_G3" "-" TYPE_X86_CPU, "family", "15" }, 205 { "Opteron_G3" "-" TYPE_X86_CPU, "model", "6" }, 206 { "Opteron_G3" "-" TYPE_X86_CPU, "stepping", "1" }, 207 { "isa-pcspk", "migrate", "off" }, 208 }; 209 const size_t pc_compat_2_7_len = G_N_ELEMENTS(pc_compat_2_7); 210 211 GlobalProperty pc_compat_2_6[] = { 212 { TYPE_X86_CPU, "cpuid-0xb", "off" }, 213 { "vmxnet3", "romfile", "" }, 214 { TYPE_X86_CPU, "fill-mtrr-mask", "off" }, 215 { "apic-common", "legacy-instance-id", "on", } 216 }; 217 const size_t pc_compat_2_6_len = G_N_ELEMENTS(pc_compat_2_6); 218 219 GlobalProperty pc_compat_2_5[] = {}; 220 const size_t pc_compat_2_5_len = G_N_ELEMENTS(pc_compat_2_5); 221 222 GlobalProperty pc_compat_2_4[] = { 223 PC_CPU_MODEL_IDS("2.4.0") 224 { "Haswell-" TYPE_X86_CPU, "abm", "off" }, 225 { "Haswell-noTSX-" TYPE_X86_CPU, "abm", "off" }, 226 { "Broadwell-" TYPE_X86_CPU, "abm", "off" }, 227 { "Broadwell-noTSX-" TYPE_X86_CPU, "abm", "off" }, 228 { "host" "-" TYPE_X86_CPU, "host-cache-info", "on" }, 229 { TYPE_X86_CPU, "check", "off" }, 230 { "qemu64" "-" TYPE_X86_CPU, "sse4a", "on" }, 231 { "qemu64" "-" TYPE_X86_CPU, "abm", "on" }, 232 { "qemu64" "-" TYPE_X86_CPU, "popcnt", "on" }, 233 { "qemu32" "-" TYPE_X86_CPU, "popcnt", "on" }, 234 { "Opteron_G2" "-" TYPE_X86_CPU, "rdtscp", "on" }, 235 { "Opteron_G3" "-" TYPE_X86_CPU, "rdtscp", "on" }, 236 { "Opteron_G4" "-" TYPE_X86_CPU, "rdtscp", "on" }, 237 { "Opteron_G5" "-" TYPE_X86_CPU, "rdtscp", "on", } 238 }; 239 const size_t pc_compat_2_4_len = G_N_ELEMENTS(pc_compat_2_4); 240 241 GlobalProperty pc_compat_2_3[] = { 242 PC_CPU_MODEL_IDS("2.3.0") 243 { TYPE_X86_CPU, "arat", "off" }, 244 { "qemu64" "-" TYPE_X86_CPU, "min-level", "4" }, 245 { "kvm64" "-" TYPE_X86_CPU, "min-level", "5" }, 246 { "pentium3" "-" TYPE_X86_CPU, "min-level", "2" }, 247 { "n270" "-" TYPE_X86_CPU, "min-level", "5" }, 248 { "Conroe" "-" TYPE_X86_CPU, "min-level", "4" }, 249 { "Penryn" "-" TYPE_X86_CPU, "min-level", "4" }, 250 { "Nehalem" "-" TYPE_X86_CPU, "min-level", "4" }, 251 { "n270" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 252 { "Penryn" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 253 { "Conroe" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 254 { "Nehalem" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 255 { "Westmere" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 256 { "SandyBridge" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 257 { "IvyBridge" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 258 { "Haswell" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 259 { "Haswell-noTSX" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 260 { "Broadwell" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 261 { "Broadwell-noTSX" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 262 { TYPE_X86_CPU, "kvm-no-smi-migration", "on" }, 263 }; 264 const size_t pc_compat_2_3_len = G_N_ELEMENTS(pc_compat_2_3); 265 266 GlobalProperty pc_compat_2_2[] = { 267 PC_CPU_MODEL_IDS("2.2.0") 268 { "kvm64" "-" TYPE_X86_CPU, "vme", "off" }, 269 { "kvm32" "-" TYPE_X86_CPU, "vme", "off" }, 270 { "Conroe" "-" TYPE_X86_CPU, "vme", "off" }, 271 { "Penryn" "-" TYPE_X86_CPU, "vme", "off" }, 272 { "Nehalem" "-" TYPE_X86_CPU, "vme", "off" }, 273 { "Westmere" "-" TYPE_X86_CPU, "vme", "off" }, 274 { "SandyBridge" "-" TYPE_X86_CPU, "vme", "off" }, 275 { "Haswell" "-" TYPE_X86_CPU, "vme", "off" }, 276 { "Broadwell" "-" TYPE_X86_CPU, "vme", "off" }, 277 { "Opteron_G1" "-" TYPE_X86_CPU, "vme", "off" }, 278 { "Opteron_G2" "-" TYPE_X86_CPU, "vme", "off" }, 279 { "Opteron_G3" "-" TYPE_X86_CPU, "vme", "off" }, 280 { "Opteron_G4" "-" TYPE_X86_CPU, "vme", "off" }, 281 { "Opteron_G5" "-" TYPE_X86_CPU, "vme", "off" }, 282 { "Haswell" "-" TYPE_X86_CPU, "f16c", "off" }, 283 { "Haswell" "-" TYPE_X86_CPU, "rdrand", "off" }, 284 { "Broadwell" "-" TYPE_X86_CPU, "f16c", "off" }, 285 { "Broadwell" "-" TYPE_X86_CPU, "rdrand", "off" }, 286 }; 287 const size_t pc_compat_2_2_len = G_N_ELEMENTS(pc_compat_2_2); 288 289 GlobalProperty pc_compat_2_1[] = { 290 PC_CPU_MODEL_IDS("2.1.0") 291 { "coreduo" "-" TYPE_X86_CPU, "vmx", "on" }, 292 { "core2duo" "-" TYPE_X86_CPU, "vmx", "on" }, 293 }; 294 const size_t pc_compat_2_1_len = G_N_ELEMENTS(pc_compat_2_1); 295 296 GlobalProperty pc_compat_2_0[] = { 297 PC_CPU_MODEL_IDS("2.0.0") 298 { "virtio-scsi-pci", "any_layout", "off" }, 299 { "PIIX4_PM", "memory-hotplug-support", "off" }, 300 { "apic", "version", "0x11" }, 301 { "nec-usb-xhci", "superspeed-ports-first", "off" }, 302 { "nec-usb-xhci", "force-pcie-endcap", "on" }, 303 { "pci-serial", "prog_if", "0" }, 304 { "pci-serial-2x", "prog_if", "0" }, 305 { "pci-serial-4x", "prog_if", "0" }, 306 { "virtio-net-pci", "guest_announce", "off" }, 307 { "ICH9-LPC", "memory-hotplug-support", "off" }, 308 { "xio3130-downstream", COMPAT_PROP_PCP, "off" }, 309 { "ioh3420", COMPAT_PROP_PCP, "off" }, 310 }; 311 const size_t pc_compat_2_0_len = G_N_ELEMENTS(pc_compat_2_0); 312 313 GlobalProperty pc_compat_1_7[] = { 314 PC_CPU_MODEL_IDS("1.7.0") 315 { TYPE_USB_DEVICE, "msos-desc", "no" }, 316 { "PIIX4_PM", ACPI_PM_PROP_ACPI_PCIHP_BRIDGE, "off" }, 317 { "hpet", HPET_INTCAP, "4" }, 318 }; 319 const size_t pc_compat_1_7_len = G_N_ELEMENTS(pc_compat_1_7); 320 321 GlobalProperty pc_compat_1_6[] = { 322 PC_CPU_MODEL_IDS("1.6.0") 323 { "e1000", "mitigation", "off" }, 324 { "qemu64-" TYPE_X86_CPU, "model", "2" }, 325 { "qemu32-" TYPE_X86_CPU, "model", "3" }, 326 { "i440FX-pcihost", "short_root_bus", "1" }, 327 { "q35-pcihost", "short_root_bus", "1" }, 328 }; 329 const size_t pc_compat_1_6_len = G_N_ELEMENTS(pc_compat_1_6); 330 331 GlobalProperty pc_compat_1_5[] = { 332 PC_CPU_MODEL_IDS("1.5.0") 333 { "Conroe-" TYPE_X86_CPU, "model", "2" }, 334 { "Conroe-" TYPE_X86_CPU, "min-level", "2" }, 335 { "Penryn-" TYPE_X86_CPU, "model", "2" }, 336 { "Penryn-" TYPE_X86_CPU, "min-level", "2" }, 337 { "Nehalem-" TYPE_X86_CPU, "model", "2" }, 338 { "Nehalem-" TYPE_X86_CPU, "min-level", "2" }, 339 { "virtio-net-pci", "any_layout", "off" }, 340 { TYPE_X86_CPU, "pmu", "on" }, 341 { "i440FX-pcihost", "short_root_bus", "0" }, 342 { "q35-pcihost", "short_root_bus", "0" }, 343 }; 344 const size_t pc_compat_1_5_len = G_N_ELEMENTS(pc_compat_1_5); 345 346 GlobalProperty pc_compat_1_4[] = { 347 PC_CPU_MODEL_IDS("1.4.0") 348 { "scsi-hd", "discard_granularity", "0" }, 349 { "scsi-cd", "discard_granularity", "0" }, 350 { "ide-hd", "discard_granularity", "0" }, 351 { "ide-cd", "discard_granularity", "0" }, 352 { "virtio-blk-pci", "discard_granularity", "0" }, 353 /* DEV_NVECTORS_UNSPECIFIED as a uint32_t string: */ 354 { "virtio-serial-pci", "vectors", "0xFFFFFFFF" }, 355 { "virtio-net-pci", "ctrl_guest_offloads", "off" }, 356 { "e1000", "romfile", "pxe-e1000.rom" }, 357 { "ne2k_pci", "romfile", "pxe-ne2k_pci.rom" }, 358 { "pcnet", "romfile", "pxe-pcnet.rom" }, 359 { "rtl8139", "romfile", "pxe-rtl8139.rom" }, 360 { "virtio-net-pci", "romfile", "pxe-virtio.rom" }, 361 { "486-" TYPE_X86_CPU, "model", "0" }, 362 { "n270" "-" TYPE_X86_CPU, "movbe", "off" }, 363 { "Westmere" "-" TYPE_X86_CPU, "pclmulqdq", "off" }, 364 }; 365 const size_t pc_compat_1_4_len = G_N_ELEMENTS(pc_compat_1_4); 366 367 GSIState *pc_gsi_create(qemu_irq **irqs, bool pci_enabled) 368 { 369 GSIState *s; 370 371 s = g_new0(GSIState, 1); 372 if (kvm_ioapic_in_kernel()) { 373 kvm_pc_setup_irq_routing(pci_enabled); 374 } 375 *irqs = qemu_allocate_irqs(gsi_handler, s, GSI_NUM_PINS); 376 377 return s; 378 } 379 380 static void ioport80_write(void *opaque, hwaddr addr, uint64_t data, 381 unsigned size) 382 { 383 } 384 385 static uint64_t ioport80_read(void *opaque, hwaddr addr, unsigned size) 386 { 387 return 0xffffffffffffffffULL; 388 } 389 390 /* MSDOS compatibility mode FPU exception support */ 391 static void ioportF0_write(void *opaque, hwaddr addr, uint64_t data, 392 unsigned size) 393 { 394 if (tcg_enabled()) { 395 cpu_set_ignne(); 396 } 397 } 398 399 static uint64_t ioportF0_read(void *opaque, hwaddr addr, unsigned size) 400 { 401 return 0xffffffffffffffffULL; 402 } 403 404 /* PC cmos mappings */ 405 406 #define REG_EQUIPMENT_BYTE 0x14 407 408 static void cmos_init_hd(ISADevice *s, int type_ofs, int info_ofs, 409 int16_t cylinders, int8_t heads, int8_t sectors) 410 { 411 rtc_set_memory(s, type_ofs, 47); 412 rtc_set_memory(s, info_ofs, cylinders); 413 rtc_set_memory(s, info_ofs + 1, cylinders >> 8); 414 rtc_set_memory(s, info_ofs + 2, heads); 415 rtc_set_memory(s, info_ofs + 3, 0xff); 416 rtc_set_memory(s, info_ofs + 4, 0xff); 417 rtc_set_memory(s, info_ofs + 5, 0xc0 | ((heads > 8) << 3)); 418 rtc_set_memory(s, info_ofs + 6, cylinders); 419 rtc_set_memory(s, info_ofs + 7, cylinders >> 8); 420 rtc_set_memory(s, info_ofs + 8, sectors); 421 } 422 423 /* convert boot_device letter to something recognizable by the bios */ 424 static int boot_device2nibble(char boot_device) 425 { 426 switch(boot_device) { 427 case 'a': 428 case 'b': 429 return 0x01; /* floppy boot */ 430 case 'c': 431 return 0x02; /* hard drive boot */ 432 case 'd': 433 return 0x03; /* CD-ROM boot */ 434 case 'n': 435 return 0x04; /* Network boot */ 436 } 437 return 0; 438 } 439 440 static void set_boot_dev(ISADevice *s, const char *boot_device, Error **errp) 441 { 442 #define PC_MAX_BOOT_DEVICES 3 443 int nbds, bds[3] = { 0, }; 444 int i; 445 446 nbds = strlen(boot_device); 447 if (nbds > PC_MAX_BOOT_DEVICES) { 448 error_setg(errp, "Too many boot devices for PC"); 449 return; 450 } 451 for (i = 0; i < nbds; i++) { 452 bds[i] = boot_device2nibble(boot_device[i]); 453 if (bds[i] == 0) { 454 error_setg(errp, "Invalid boot device for PC: '%c'", 455 boot_device[i]); 456 return; 457 } 458 } 459 rtc_set_memory(s, 0x3d, (bds[1] << 4) | bds[0]); 460 rtc_set_memory(s, 0x38, (bds[2] << 4) | (fd_bootchk ? 0x0 : 0x1)); 461 } 462 463 static void pc_boot_set(void *opaque, const char *boot_device, Error **errp) 464 { 465 set_boot_dev(opaque, boot_device, errp); 466 } 467 468 static void pc_cmos_init_floppy(ISADevice *rtc_state, ISADevice *floppy) 469 { 470 int val, nb, i; 471 FloppyDriveType fd_type[2] = { FLOPPY_DRIVE_TYPE_NONE, 472 FLOPPY_DRIVE_TYPE_NONE }; 473 474 /* floppy type */ 475 if (floppy) { 476 for (i = 0; i < 2; i++) { 477 fd_type[i] = isa_fdc_get_drive_type(floppy, i); 478 } 479 } 480 val = (cmos_get_fd_drive_type(fd_type[0]) << 4) | 481 cmos_get_fd_drive_type(fd_type[1]); 482 rtc_set_memory(rtc_state, 0x10, val); 483 484 val = rtc_get_memory(rtc_state, REG_EQUIPMENT_BYTE); 485 nb = 0; 486 if (fd_type[0] != FLOPPY_DRIVE_TYPE_NONE) { 487 nb++; 488 } 489 if (fd_type[1] != FLOPPY_DRIVE_TYPE_NONE) { 490 nb++; 491 } 492 switch (nb) { 493 case 0: 494 break; 495 case 1: 496 val |= 0x01; /* 1 drive, ready for boot */ 497 break; 498 case 2: 499 val |= 0x41; /* 2 drives, ready for boot */ 500 break; 501 } 502 rtc_set_memory(rtc_state, REG_EQUIPMENT_BYTE, val); 503 } 504 505 typedef struct pc_cmos_init_late_arg { 506 ISADevice *rtc_state; 507 BusState *idebus[2]; 508 } pc_cmos_init_late_arg; 509 510 typedef struct check_fdc_state { 511 ISADevice *floppy; 512 bool multiple; 513 } CheckFdcState; 514 515 static int check_fdc(Object *obj, void *opaque) 516 { 517 CheckFdcState *state = opaque; 518 Object *fdc; 519 uint32_t iobase; 520 Error *local_err = NULL; 521 522 fdc = object_dynamic_cast(obj, TYPE_ISA_FDC); 523 if (!fdc) { 524 return 0; 525 } 526 527 iobase = object_property_get_uint(obj, "iobase", &local_err); 528 if (local_err || iobase != 0x3f0) { 529 error_free(local_err); 530 return 0; 531 } 532 533 if (state->floppy) { 534 state->multiple = true; 535 } else { 536 state->floppy = ISA_DEVICE(obj); 537 } 538 return 0; 539 } 540 541 static const char * const fdc_container_path[] = { 542 "/unattached", "/peripheral", "/peripheral-anon" 543 }; 544 545 /* 546 * Locate the FDC at IO address 0x3f0, in order to configure the CMOS registers 547 * and ACPI objects. 548 */ 549 ISADevice *pc_find_fdc0(void) 550 { 551 int i; 552 Object *container; 553 CheckFdcState state = { 0 }; 554 555 for (i = 0; i < ARRAY_SIZE(fdc_container_path); i++) { 556 container = container_get(qdev_get_machine(), fdc_container_path[i]); 557 object_child_foreach(container, check_fdc, &state); 558 } 559 560 if (state.multiple) { 561 warn_report("multiple floppy disk controllers with " 562 "iobase=0x3f0 have been found"); 563 error_printf("the one being picked for CMOS setup might not reflect " 564 "your intent"); 565 } 566 567 return state.floppy; 568 } 569 570 static void pc_cmos_init_late(void *opaque) 571 { 572 pc_cmos_init_late_arg *arg = opaque; 573 ISADevice *s = arg->rtc_state; 574 int16_t cylinders; 575 int8_t heads, sectors; 576 int val; 577 int i, trans; 578 579 val = 0; 580 if (arg->idebus[0] && ide_get_geometry(arg->idebus[0], 0, 581 &cylinders, &heads, §ors) >= 0) { 582 cmos_init_hd(s, 0x19, 0x1b, cylinders, heads, sectors); 583 val |= 0xf0; 584 } 585 if (arg->idebus[0] && ide_get_geometry(arg->idebus[0], 1, 586 &cylinders, &heads, §ors) >= 0) { 587 cmos_init_hd(s, 0x1a, 0x24, cylinders, heads, sectors); 588 val |= 0x0f; 589 } 590 rtc_set_memory(s, 0x12, val); 591 592 val = 0; 593 for (i = 0; i < 4; i++) { 594 /* NOTE: ide_get_geometry() returns the physical 595 geometry. It is always such that: 1 <= sects <= 63, 1 596 <= heads <= 16, 1 <= cylinders <= 16383. The BIOS 597 geometry can be different if a translation is done. */ 598 if (arg->idebus[i / 2] && 599 ide_get_geometry(arg->idebus[i / 2], i % 2, 600 &cylinders, &heads, §ors) >= 0) { 601 trans = ide_get_bios_chs_trans(arg->idebus[i / 2], i % 2) - 1; 602 assert((trans & ~3) == 0); 603 val |= trans << (i * 2); 604 } 605 } 606 rtc_set_memory(s, 0x39, val); 607 608 pc_cmos_init_floppy(s, pc_find_fdc0()); 609 610 qemu_unregister_reset(pc_cmos_init_late, opaque); 611 } 612 613 void pc_cmos_init(PCMachineState *pcms, 614 BusState *idebus0, BusState *idebus1, 615 ISADevice *s) 616 { 617 int val; 618 static pc_cmos_init_late_arg arg; 619 X86MachineState *x86ms = X86_MACHINE(pcms); 620 621 /* various important CMOS locations needed by PC/Bochs bios */ 622 623 /* memory size */ 624 /* base memory (first MiB) */ 625 val = MIN(x86ms->below_4g_mem_size / KiB, 640); 626 rtc_set_memory(s, 0x15, val); 627 rtc_set_memory(s, 0x16, val >> 8); 628 /* extended memory (next 64MiB) */ 629 if (x86ms->below_4g_mem_size > 1 * MiB) { 630 val = (x86ms->below_4g_mem_size - 1 * MiB) / KiB; 631 } else { 632 val = 0; 633 } 634 if (val > 65535) 635 val = 65535; 636 rtc_set_memory(s, 0x17, val); 637 rtc_set_memory(s, 0x18, val >> 8); 638 rtc_set_memory(s, 0x30, val); 639 rtc_set_memory(s, 0x31, val >> 8); 640 /* memory between 16MiB and 4GiB */ 641 if (x86ms->below_4g_mem_size > 16 * MiB) { 642 val = (x86ms->below_4g_mem_size - 16 * MiB) / (64 * KiB); 643 } else { 644 val = 0; 645 } 646 if (val > 65535) 647 val = 65535; 648 rtc_set_memory(s, 0x34, val); 649 rtc_set_memory(s, 0x35, val >> 8); 650 /* memory above 4GiB */ 651 val = x86ms->above_4g_mem_size / 65536; 652 rtc_set_memory(s, 0x5b, val); 653 rtc_set_memory(s, 0x5c, val >> 8); 654 rtc_set_memory(s, 0x5d, val >> 16); 655 656 object_property_add_link(OBJECT(pcms), "rtc_state", 657 TYPE_ISA_DEVICE, 658 (Object **)&x86ms->rtc, 659 object_property_allow_set_link, 660 OBJ_PROP_LINK_STRONG); 661 object_property_set_link(OBJECT(pcms), "rtc_state", OBJECT(s), 662 &error_abort); 663 664 set_boot_dev(s, MACHINE(pcms)->boot_order, &error_fatal); 665 666 val = 0; 667 val |= 0x02; /* FPU is there */ 668 val |= 0x04; /* PS/2 mouse installed */ 669 rtc_set_memory(s, REG_EQUIPMENT_BYTE, val); 670 671 /* hard drives and FDC */ 672 arg.rtc_state = s; 673 arg.idebus[0] = idebus0; 674 arg.idebus[1] = idebus1; 675 qemu_register_reset(pc_cmos_init_late, &arg); 676 } 677 678 static void handle_a20_line_change(void *opaque, int irq, int level) 679 { 680 X86CPU *cpu = opaque; 681 682 /* XXX: send to all CPUs ? */ 683 /* XXX: add logic to handle multiple A20 line sources */ 684 x86_cpu_set_a20(cpu, level); 685 } 686 687 #define NE2000_NB_MAX 6 688 689 static const int ne2000_io[NE2000_NB_MAX] = { 0x300, 0x320, 0x340, 0x360, 690 0x280, 0x380 }; 691 static const int ne2000_irq[NE2000_NB_MAX] = { 9, 10, 11, 3, 4, 5 }; 692 693 void pc_init_ne2k_isa(ISABus *bus, NICInfo *nd) 694 { 695 static int nb_ne2k = 0; 696 697 if (nb_ne2k == NE2000_NB_MAX) 698 return; 699 isa_ne2000_init(bus, ne2000_io[nb_ne2k], 700 ne2000_irq[nb_ne2k], nd); 701 nb_ne2k++; 702 } 703 704 void pc_acpi_smi_interrupt(void *opaque, int irq, int level) 705 { 706 X86CPU *cpu = opaque; 707 708 if (level) { 709 cpu_interrupt(CPU(cpu), CPU_INTERRUPT_SMI); 710 } 711 } 712 713 /* 714 * This function is very similar to smp_parse() 715 * in hw/core/machine.c but includes CPU die support. 716 */ 717 static void pc_smp_parse(MachineState *ms, SMPConfiguration *config, Error **errp) 718 { 719 unsigned cpus = config->has_cpus ? config->cpus : 0; 720 unsigned sockets = config->has_sockets ? config->sockets : 0; 721 unsigned dies = config->has_dies ? config->dies : 1; 722 unsigned cores = config->has_cores ? config->cores : 0; 723 unsigned threads = config->has_threads ? config->threads : 0; 724 725 /* compute missing values, prefer sockets over cores over threads */ 726 if (cpus == 0 || sockets == 0) { 727 cores = cores > 0 ? cores : 1; 728 threads = threads > 0 ? threads : 1; 729 if (cpus == 0) { 730 sockets = sockets > 0 ? sockets : 1; 731 cpus = cores * threads * dies * sockets; 732 } else { 733 ms->smp.max_cpus = config->has_maxcpus ? config->maxcpus : cpus; 734 sockets = ms->smp.max_cpus / (cores * threads * dies); 735 } 736 } else if (cores == 0) { 737 threads = threads > 0 ? threads : 1; 738 cores = cpus / (sockets * dies * threads); 739 cores = cores > 0 ? cores : 1; 740 } else if (threads == 0) { 741 threads = cpus / (cores * dies * sockets); 742 threads = threads > 0 ? threads : 1; 743 } else if (sockets * dies * cores * threads < cpus) { 744 error_setg(errp, "cpu topology: " 745 "sockets (%u) * dies (%u) * cores (%u) * threads (%u) < " 746 "smp_cpus (%u)", 747 sockets, dies, cores, threads, cpus); 748 return; 749 } 750 751 ms->smp.max_cpus = config->has_maxcpus ? config->maxcpus : cpus; 752 753 if (ms->smp.max_cpus < cpus) { 754 error_setg(errp, "maxcpus must be equal to or greater than smp"); 755 return; 756 } 757 758 if (sockets * dies * cores * threads != ms->smp.max_cpus) { 759 error_setg(errp, "Invalid CPU topology deprecated: " 760 "sockets (%u) * dies (%u) * cores (%u) * threads (%u) " 761 "!= maxcpus (%u)", 762 sockets, dies, cores, threads, 763 ms->smp.max_cpus); 764 return; 765 } 766 767 ms->smp.cpus = cpus; 768 ms->smp.cores = cores; 769 ms->smp.threads = threads; 770 ms->smp.sockets = sockets; 771 ms->smp.dies = dies; 772 } 773 774 static 775 void pc_machine_done(Notifier *notifier, void *data) 776 { 777 PCMachineState *pcms = container_of(notifier, 778 PCMachineState, machine_done); 779 X86MachineState *x86ms = X86_MACHINE(pcms); 780 781 /* set the number of CPUs */ 782 x86_rtc_set_cpus_count(x86ms->rtc, x86ms->boot_cpus); 783 784 fw_cfg_add_extra_pci_roots(pcms->bus, x86ms->fw_cfg); 785 786 acpi_setup(); 787 if (x86ms->fw_cfg) { 788 fw_cfg_build_smbios(MACHINE(pcms), x86ms->fw_cfg); 789 fw_cfg_build_feature_control(MACHINE(pcms), x86ms->fw_cfg); 790 /* update FW_CFG_NB_CPUS to account for -device added CPUs */ 791 fw_cfg_modify_i16(x86ms->fw_cfg, FW_CFG_NB_CPUS, x86ms->boot_cpus); 792 } 793 794 795 if (x86ms->apic_id_limit > 255 && !xen_enabled() && 796 !kvm_irqchip_in_kernel()) { 797 error_report("current -smp configuration requires kernel " 798 "irqchip support."); 799 exit(EXIT_FAILURE); 800 } 801 } 802 803 void pc_guest_info_init(PCMachineState *pcms) 804 { 805 X86MachineState *x86ms = X86_MACHINE(pcms); 806 807 x86ms->apic_xrupt_override = true; 808 pcms->machine_done.notify = pc_machine_done; 809 qemu_add_machine_init_done_notifier(&pcms->machine_done); 810 } 811 812 /* setup pci memory address space mapping into system address space */ 813 void pc_pci_as_mapping_init(Object *owner, MemoryRegion *system_memory, 814 MemoryRegion *pci_address_space) 815 { 816 /* Set to lower priority than RAM */ 817 memory_region_add_subregion_overlap(system_memory, 0x0, 818 pci_address_space, -1); 819 } 820 821 void xen_load_linux(PCMachineState *pcms) 822 { 823 int i; 824 FWCfgState *fw_cfg; 825 PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); 826 X86MachineState *x86ms = X86_MACHINE(pcms); 827 828 assert(MACHINE(pcms)->kernel_filename != NULL); 829 830 fw_cfg = fw_cfg_init_io(FW_CFG_IO_BASE); 831 fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, x86ms->boot_cpus); 832 rom_set_fw(fw_cfg); 833 834 x86_load_linux(x86ms, fw_cfg, pcmc->acpi_data_size, 835 pcmc->pvh_enabled, pcmc->linuxboot_dma_enabled); 836 for (i = 0; i < nb_option_roms; i++) { 837 assert(!strcmp(option_rom[i].name, "linuxboot.bin") || 838 !strcmp(option_rom[i].name, "linuxboot_dma.bin") || 839 !strcmp(option_rom[i].name, "pvh.bin") || 840 !strcmp(option_rom[i].name, "multiboot.bin")); 841 rom_add_option(option_rom[i].name, option_rom[i].bootindex); 842 } 843 x86ms->fw_cfg = fw_cfg; 844 } 845 846 #define PC_ROM_MIN_VGA 0xc0000 847 #define PC_ROM_MIN_OPTION 0xc8000 848 #define PC_ROM_MAX 0xe0000 849 #define PC_ROM_ALIGN 0x800 850 #define PC_ROM_SIZE (PC_ROM_MAX - PC_ROM_MIN_VGA) 851 852 void pc_memory_init(PCMachineState *pcms, 853 MemoryRegion *system_memory, 854 MemoryRegion *rom_memory, 855 MemoryRegion **ram_memory) 856 { 857 int linux_boot, i; 858 MemoryRegion *option_rom_mr; 859 MemoryRegion *ram_below_4g, *ram_above_4g; 860 FWCfgState *fw_cfg; 861 MachineState *machine = MACHINE(pcms); 862 MachineClass *mc = MACHINE_GET_CLASS(machine); 863 PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); 864 X86MachineState *x86ms = X86_MACHINE(pcms); 865 866 assert(machine->ram_size == x86ms->below_4g_mem_size + 867 x86ms->above_4g_mem_size); 868 869 linux_boot = (machine->kernel_filename != NULL); 870 871 /* 872 * Split single memory region and use aliases to address portions of it, 873 * done for backwards compatibility with older qemus. 874 */ 875 *ram_memory = machine->ram; 876 ram_below_4g = g_malloc(sizeof(*ram_below_4g)); 877 memory_region_init_alias(ram_below_4g, NULL, "ram-below-4g", machine->ram, 878 0, x86ms->below_4g_mem_size); 879 memory_region_add_subregion(system_memory, 0, ram_below_4g); 880 e820_add_entry(0, x86ms->below_4g_mem_size, E820_RAM); 881 if (x86ms->above_4g_mem_size > 0) { 882 ram_above_4g = g_malloc(sizeof(*ram_above_4g)); 883 memory_region_init_alias(ram_above_4g, NULL, "ram-above-4g", 884 machine->ram, 885 x86ms->below_4g_mem_size, 886 x86ms->above_4g_mem_size); 887 memory_region_add_subregion(system_memory, 0x100000000ULL, 888 ram_above_4g); 889 e820_add_entry(0x100000000ULL, x86ms->above_4g_mem_size, E820_RAM); 890 } 891 892 if (!pcmc->has_reserved_memory && 893 (machine->ram_slots || 894 (machine->maxram_size > machine->ram_size))) { 895 896 error_report("\"-memory 'slots|maxmem'\" is not supported by: %s", 897 mc->name); 898 exit(EXIT_FAILURE); 899 } 900 901 /* always allocate the device memory information */ 902 machine->device_memory = g_malloc0(sizeof(*machine->device_memory)); 903 904 /* initialize device memory address space */ 905 if (pcmc->has_reserved_memory && 906 (machine->ram_size < machine->maxram_size)) { 907 ram_addr_t device_mem_size = machine->maxram_size - machine->ram_size; 908 909 if (machine->ram_slots > ACPI_MAX_RAM_SLOTS) { 910 error_report("unsupported amount of memory slots: %"PRIu64, 911 machine->ram_slots); 912 exit(EXIT_FAILURE); 913 } 914 915 if (QEMU_ALIGN_UP(machine->maxram_size, 916 TARGET_PAGE_SIZE) != machine->maxram_size) { 917 error_report("maximum memory size must by aligned to multiple of " 918 "%d bytes", TARGET_PAGE_SIZE); 919 exit(EXIT_FAILURE); 920 } 921 922 machine->device_memory->base = 923 ROUND_UP(0x100000000ULL + x86ms->above_4g_mem_size, 1 * GiB); 924 925 if (pcmc->enforce_aligned_dimm) { 926 /* size device region assuming 1G page max alignment per slot */ 927 device_mem_size += (1 * GiB) * machine->ram_slots; 928 } 929 930 if ((machine->device_memory->base + device_mem_size) < 931 device_mem_size) { 932 error_report("unsupported amount of maximum memory: " RAM_ADDR_FMT, 933 machine->maxram_size); 934 exit(EXIT_FAILURE); 935 } 936 937 memory_region_init(&machine->device_memory->mr, OBJECT(pcms), 938 "device-memory", device_mem_size); 939 memory_region_add_subregion(system_memory, machine->device_memory->base, 940 &machine->device_memory->mr); 941 } 942 943 /* Initialize PC system firmware */ 944 pc_system_firmware_init(pcms, rom_memory); 945 946 option_rom_mr = g_malloc(sizeof(*option_rom_mr)); 947 memory_region_init_ram(option_rom_mr, NULL, "pc.rom", PC_ROM_SIZE, 948 &error_fatal); 949 if (pcmc->pci_enabled) { 950 memory_region_set_readonly(option_rom_mr, true); 951 } 952 memory_region_add_subregion_overlap(rom_memory, 953 PC_ROM_MIN_VGA, 954 option_rom_mr, 955 1); 956 957 fw_cfg = fw_cfg_arch_create(machine, 958 x86ms->boot_cpus, x86ms->apic_id_limit); 959 960 rom_set_fw(fw_cfg); 961 962 if (pcmc->has_reserved_memory && machine->device_memory->base) { 963 uint64_t *val = g_malloc(sizeof(*val)); 964 PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); 965 uint64_t res_mem_end = machine->device_memory->base; 966 967 if (!pcmc->broken_reserved_end) { 968 res_mem_end += memory_region_size(&machine->device_memory->mr); 969 } 970 *val = cpu_to_le64(ROUND_UP(res_mem_end, 1 * GiB)); 971 fw_cfg_add_file(fw_cfg, "etc/reserved-memory-end", val, sizeof(*val)); 972 } 973 974 if (linux_boot) { 975 x86_load_linux(x86ms, fw_cfg, pcmc->acpi_data_size, 976 pcmc->pvh_enabled, pcmc->linuxboot_dma_enabled); 977 } 978 979 for (i = 0; i < nb_option_roms; i++) { 980 rom_add_option(option_rom[i].name, option_rom[i].bootindex); 981 } 982 x86ms->fw_cfg = fw_cfg; 983 984 /* Init default IOAPIC address space */ 985 x86ms->ioapic_as = &address_space_memory; 986 987 /* Init ACPI memory hotplug IO base address */ 988 pcms->memhp_io_base = ACPI_MEMORY_HOTPLUG_BASE; 989 } 990 991 /* 992 * The 64bit pci hole starts after "above 4G RAM" and 993 * potentially the space reserved for memory hotplug. 994 */ 995 uint64_t pc_pci_hole64_start(void) 996 { 997 PCMachineState *pcms = PC_MACHINE(qdev_get_machine()); 998 PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); 999 MachineState *ms = MACHINE(pcms); 1000 X86MachineState *x86ms = X86_MACHINE(pcms); 1001 uint64_t hole64_start = 0; 1002 1003 if (pcmc->has_reserved_memory && ms->device_memory->base) { 1004 hole64_start = ms->device_memory->base; 1005 if (!pcmc->broken_reserved_end) { 1006 hole64_start += memory_region_size(&ms->device_memory->mr); 1007 } 1008 } else { 1009 hole64_start = 0x100000000ULL + x86ms->above_4g_mem_size; 1010 } 1011 1012 return ROUND_UP(hole64_start, 1 * GiB); 1013 } 1014 1015 DeviceState *pc_vga_init(ISABus *isa_bus, PCIBus *pci_bus) 1016 { 1017 DeviceState *dev = NULL; 1018 1019 rom_set_order_override(FW_CFG_ORDER_OVERRIDE_VGA); 1020 if (pci_bus) { 1021 PCIDevice *pcidev = pci_vga_init(pci_bus); 1022 dev = pcidev ? &pcidev->qdev : NULL; 1023 } else if (isa_bus) { 1024 ISADevice *isadev = isa_vga_init(isa_bus); 1025 dev = isadev ? DEVICE(isadev) : NULL; 1026 } 1027 rom_reset_order_override(); 1028 return dev; 1029 } 1030 1031 static const MemoryRegionOps ioport80_io_ops = { 1032 .write = ioport80_write, 1033 .read = ioport80_read, 1034 .endianness = DEVICE_NATIVE_ENDIAN, 1035 .impl = { 1036 .min_access_size = 1, 1037 .max_access_size = 1, 1038 }, 1039 }; 1040 1041 static const MemoryRegionOps ioportF0_io_ops = { 1042 .write = ioportF0_write, 1043 .read = ioportF0_read, 1044 .endianness = DEVICE_NATIVE_ENDIAN, 1045 .impl = { 1046 .min_access_size = 1, 1047 .max_access_size = 1, 1048 }, 1049 }; 1050 1051 static void pc_superio_init(ISABus *isa_bus, bool create_fdctrl, bool no_vmport) 1052 { 1053 int i; 1054 DriveInfo *fd[MAX_FD]; 1055 qemu_irq *a20_line; 1056 ISADevice *fdc, *i8042, *port92, *vmmouse; 1057 1058 serial_hds_isa_init(isa_bus, 0, MAX_ISA_SERIAL_PORTS); 1059 parallel_hds_isa_init(isa_bus, MAX_PARALLEL_PORTS); 1060 1061 for (i = 0; i < MAX_FD; i++) { 1062 fd[i] = drive_get(IF_FLOPPY, 0, i); 1063 create_fdctrl |= !!fd[i]; 1064 } 1065 if (create_fdctrl) { 1066 fdc = isa_new(TYPE_ISA_FDC); 1067 if (fdc) { 1068 isa_realize_and_unref(fdc, isa_bus, &error_fatal); 1069 isa_fdc_init_drives(fdc, fd); 1070 } 1071 } 1072 1073 i8042 = isa_create_simple(isa_bus, "i8042"); 1074 if (!no_vmport) { 1075 isa_create_simple(isa_bus, TYPE_VMPORT); 1076 vmmouse = isa_try_new("vmmouse"); 1077 } else { 1078 vmmouse = NULL; 1079 } 1080 if (vmmouse) { 1081 object_property_set_link(OBJECT(vmmouse), "i8042", OBJECT(i8042), 1082 &error_abort); 1083 isa_realize_and_unref(vmmouse, isa_bus, &error_fatal); 1084 } 1085 port92 = isa_create_simple(isa_bus, TYPE_PORT92); 1086 1087 a20_line = qemu_allocate_irqs(handle_a20_line_change, first_cpu, 2); 1088 i8042_setup_a20_line(i8042, a20_line[0]); 1089 qdev_connect_gpio_out_named(DEVICE(port92), 1090 PORT92_A20_LINE, 0, a20_line[1]); 1091 g_free(a20_line); 1092 } 1093 1094 void pc_basic_device_init(struct PCMachineState *pcms, 1095 ISABus *isa_bus, qemu_irq *gsi, 1096 ISADevice **rtc_state, 1097 bool create_fdctrl, 1098 uint32_t hpet_irqs) 1099 { 1100 int i; 1101 DeviceState *hpet = NULL; 1102 int pit_isa_irq = 0; 1103 qemu_irq pit_alt_irq = NULL; 1104 qemu_irq rtc_irq = NULL; 1105 ISADevice *pit = NULL; 1106 MemoryRegion *ioport80_io = g_new(MemoryRegion, 1); 1107 MemoryRegion *ioportF0_io = g_new(MemoryRegion, 1); 1108 1109 memory_region_init_io(ioport80_io, NULL, &ioport80_io_ops, NULL, "ioport80", 1); 1110 memory_region_add_subregion(isa_bus->address_space_io, 0x80, ioport80_io); 1111 1112 memory_region_init_io(ioportF0_io, NULL, &ioportF0_io_ops, NULL, "ioportF0", 1); 1113 memory_region_add_subregion(isa_bus->address_space_io, 0xf0, ioportF0_io); 1114 1115 /* 1116 * Check if an HPET shall be created. 1117 * 1118 * Without KVM_CAP_PIT_STATE2, we cannot switch off the in-kernel PIT 1119 * when the HPET wants to take over. Thus we have to disable the latter. 1120 */ 1121 if (pcms->hpet_enabled && (!kvm_irqchip_in_kernel() || 1122 kvm_has_pit_state2())) { 1123 hpet = qdev_try_new(TYPE_HPET); 1124 if (!hpet) { 1125 error_report("couldn't create HPET device"); 1126 exit(1); 1127 } 1128 /* 1129 * For pc-piix-*, hpet's intcap is always IRQ2. For pc-q35-1.7 and 1130 * earlier, use IRQ2 for compat. Otherwise, use IRQ16~23, IRQ8 and 1131 * IRQ2. 1132 */ 1133 uint8_t compat = object_property_get_uint(OBJECT(hpet), 1134 HPET_INTCAP, NULL); 1135 if (!compat) { 1136 qdev_prop_set_uint32(hpet, HPET_INTCAP, hpet_irqs); 1137 } 1138 sysbus_realize_and_unref(SYS_BUS_DEVICE(hpet), &error_fatal); 1139 sysbus_mmio_map(SYS_BUS_DEVICE(hpet), 0, HPET_BASE); 1140 1141 for (i = 0; i < GSI_NUM_PINS; i++) { 1142 sysbus_connect_irq(SYS_BUS_DEVICE(hpet), i, gsi[i]); 1143 } 1144 pit_isa_irq = -1; 1145 pit_alt_irq = qdev_get_gpio_in(hpet, HPET_LEGACY_PIT_INT); 1146 rtc_irq = qdev_get_gpio_in(hpet, HPET_LEGACY_RTC_INT); 1147 } 1148 *rtc_state = mc146818_rtc_init(isa_bus, 2000, rtc_irq); 1149 1150 qemu_register_boot_set(pc_boot_set, *rtc_state); 1151 1152 if (!xen_enabled() && pcms->pit_enabled) { 1153 if (kvm_pit_in_kernel()) { 1154 pit = kvm_pit_init(isa_bus, 0x40); 1155 } else { 1156 pit = i8254_pit_init(isa_bus, 0x40, pit_isa_irq, pit_alt_irq); 1157 } 1158 if (hpet) { 1159 /* connect PIT to output control line of the HPET */ 1160 qdev_connect_gpio_out(hpet, 0, qdev_get_gpio_in(DEVICE(pit), 0)); 1161 } 1162 pcspk_init(pcms->pcspk, isa_bus, pit); 1163 } 1164 1165 i8257_dma_init(isa_bus, 0); 1166 1167 /* Super I/O */ 1168 pc_superio_init(isa_bus, create_fdctrl, pcms->vmport != ON_OFF_AUTO_ON); 1169 } 1170 1171 void pc_nic_init(PCMachineClass *pcmc, ISABus *isa_bus, PCIBus *pci_bus) 1172 { 1173 int i; 1174 1175 rom_set_order_override(FW_CFG_ORDER_OVERRIDE_NIC); 1176 for (i = 0; i < nb_nics; i++) { 1177 NICInfo *nd = &nd_table[i]; 1178 const char *model = nd->model ? nd->model : pcmc->default_nic_model; 1179 1180 if (g_str_equal(model, "ne2k_isa")) { 1181 pc_init_ne2k_isa(isa_bus, nd); 1182 } else { 1183 pci_nic_init_nofail(nd, pci_bus, model, NULL); 1184 } 1185 } 1186 rom_reset_order_override(); 1187 } 1188 1189 void pc_i8259_create(ISABus *isa_bus, qemu_irq *i8259_irqs) 1190 { 1191 qemu_irq *i8259; 1192 1193 if (kvm_pic_in_kernel()) { 1194 i8259 = kvm_i8259_init(isa_bus); 1195 } else if (xen_enabled()) { 1196 i8259 = xen_interrupt_controller_init(); 1197 } else { 1198 i8259 = i8259_init(isa_bus, x86_allocate_cpu_irq()); 1199 } 1200 1201 for (size_t i = 0; i < ISA_NUM_IRQS; i++) { 1202 i8259_irqs[i] = i8259[i]; 1203 } 1204 1205 g_free(i8259); 1206 } 1207 1208 static void pc_memory_pre_plug(HotplugHandler *hotplug_dev, DeviceState *dev, 1209 Error **errp) 1210 { 1211 const PCMachineState *pcms = PC_MACHINE(hotplug_dev); 1212 const X86MachineState *x86ms = X86_MACHINE(hotplug_dev); 1213 const PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); 1214 const MachineState *ms = MACHINE(hotplug_dev); 1215 const bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM); 1216 const uint64_t legacy_align = TARGET_PAGE_SIZE; 1217 Error *local_err = NULL; 1218 1219 /* 1220 * When -no-acpi is used with Q35 machine type, no ACPI is built, 1221 * but pcms->acpi_dev is still created. Check !acpi_enabled in 1222 * addition to cover this case. 1223 */ 1224 if (!x86ms->acpi_dev || !x86_machine_is_acpi_enabled(x86ms)) { 1225 error_setg(errp, 1226 "memory hotplug is not enabled: missing acpi device or acpi disabled"); 1227 return; 1228 } 1229 1230 if (is_nvdimm && !ms->nvdimms_state->is_enabled) { 1231 error_setg(errp, "nvdimm is not enabled: missing 'nvdimm' in '-M'"); 1232 return; 1233 } 1234 1235 hotplug_handler_pre_plug(x86ms->acpi_dev, dev, &local_err); 1236 if (local_err) { 1237 error_propagate(errp, local_err); 1238 return; 1239 } 1240 1241 pc_dimm_pre_plug(PC_DIMM(dev), MACHINE(hotplug_dev), 1242 pcmc->enforce_aligned_dimm ? NULL : &legacy_align, errp); 1243 } 1244 1245 static void pc_memory_plug(HotplugHandler *hotplug_dev, 1246 DeviceState *dev, Error **errp) 1247 { 1248 PCMachineState *pcms = PC_MACHINE(hotplug_dev); 1249 X86MachineState *x86ms = X86_MACHINE(hotplug_dev); 1250 MachineState *ms = MACHINE(hotplug_dev); 1251 bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM); 1252 1253 pc_dimm_plug(PC_DIMM(dev), MACHINE(pcms)); 1254 1255 if (is_nvdimm) { 1256 nvdimm_plug(ms->nvdimms_state); 1257 } 1258 1259 hotplug_handler_plug(x86ms->acpi_dev, dev, &error_abort); 1260 } 1261 1262 static void pc_memory_unplug_request(HotplugHandler *hotplug_dev, 1263 DeviceState *dev, Error **errp) 1264 { 1265 X86MachineState *x86ms = X86_MACHINE(hotplug_dev); 1266 1267 /* 1268 * When -no-acpi is used with Q35 machine type, no ACPI is built, 1269 * but pcms->acpi_dev is still created. Check !acpi_enabled in 1270 * addition to cover this case. 1271 */ 1272 if (!x86ms->acpi_dev || !x86_machine_is_acpi_enabled(x86ms)) { 1273 error_setg(errp, 1274 "memory hotplug is not enabled: missing acpi device or acpi disabled"); 1275 return; 1276 } 1277 1278 if (object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM)) { 1279 error_setg(errp, "nvdimm device hot unplug is not supported yet."); 1280 return; 1281 } 1282 1283 hotplug_handler_unplug_request(x86ms->acpi_dev, dev, 1284 errp); 1285 } 1286 1287 static void pc_memory_unplug(HotplugHandler *hotplug_dev, 1288 DeviceState *dev, Error **errp) 1289 { 1290 PCMachineState *pcms = PC_MACHINE(hotplug_dev); 1291 X86MachineState *x86ms = X86_MACHINE(hotplug_dev); 1292 Error *local_err = NULL; 1293 1294 hotplug_handler_unplug(x86ms->acpi_dev, dev, &local_err); 1295 if (local_err) { 1296 goto out; 1297 } 1298 1299 pc_dimm_unplug(PC_DIMM(dev), MACHINE(pcms)); 1300 qdev_unrealize(dev); 1301 out: 1302 error_propagate(errp, local_err); 1303 } 1304 1305 static void pc_virtio_md_pci_pre_plug(HotplugHandler *hotplug_dev, 1306 DeviceState *dev, Error **errp) 1307 { 1308 HotplugHandler *hotplug_dev2 = qdev_get_bus_hotplug_handler(dev); 1309 Error *local_err = NULL; 1310 1311 if (!hotplug_dev2 && dev->hotplugged) { 1312 /* 1313 * Without a bus hotplug handler, we cannot control the plug/unplug 1314 * order. We should never reach this point when hotplugging on x86, 1315 * however, better add a safety net. 1316 */ 1317 error_setg(errp, "hotplug of virtio based memory devices not supported" 1318 " on this bus."); 1319 return; 1320 } 1321 /* 1322 * First, see if we can plug this memory device at all. If that 1323 * succeeds, branch of to the actual hotplug handler. 1324 */ 1325 memory_device_pre_plug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev), NULL, 1326 &local_err); 1327 if (!local_err && hotplug_dev2) { 1328 hotplug_handler_pre_plug(hotplug_dev2, dev, &local_err); 1329 } 1330 error_propagate(errp, local_err); 1331 } 1332 1333 static void pc_virtio_md_pci_plug(HotplugHandler *hotplug_dev, 1334 DeviceState *dev, Error **errp) 1335 { 1336 HotplugHandler *hotplug_dev2 = qdev_get_bus_hotplug_handler(dev); 1337 Error *local_err = NULL; 1338 1339 /* 1340 * Plug the memory device first and then branch off to the actual 1341 * hotplug handler. If that one fails, we can easily undo the memory 1342 * device bits. 1343 */ 1344 memory_device_plug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev)); 1345 if (hotplug_dev2) { 1346 hotplug_handler_plug(hotplug_dev2, dev, &local_err); 1347 if (local_err) { 1348 memory_device_unplug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev)); 1349 } 1350 } 1351 error_propagate(errp, local_err); 1352 } 1353 1354 static void pc_virtio_md_pci_unplug_request(HotplugHandler *hotplug_dev, 1355 DeviceState *dev, Error **errp) 1356 { 1357 /* We don't support hot unplug of virtio based memory devices */ 1358 error_setg(errp, "virtio based memory devices cannot be unplugged."); 1359 } 1360 1361 static void pc_virtio_md_pci_unplug(HotplugHandler *hotplug_dev, 1362 DeviceState *dev, Error **errp) 1363 { 1364 /* We don't support hot unplug of virtio based memory devices */ 1365 } 1366 1367 static void pc_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev, 1368 DeviceState *dev, Error **errp) 1369 { 1370 if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { 1371 pc_memory_pre_plug(hotplug_dev, dev, errp); 1372 } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { 1373 x86_cpu_pre_plug(hotplug_dev, dev, errp); 1374 } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI) || 1375 object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_MEM_PCI)) { 1376 pc_virtio_md_pci_pre_plug(hotplug_dev, dev, errp); 1377 } 1378 } 1379 1380 static void pc_machine_device_plug_cb(HotplugHandler *hotplug_dev, 1381 DeviceState *dev, Error **errp) 1382 { 1383 if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { 1384 pc_memory_plug(hotplug_dev, dev, errp); 1385 } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { 1386 x86_cpu_plug(hotplug_dev, dev, errp); 1387 } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI) || 1388 object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_MEM_PCI)) { 1389 pc_virtio_md_pci_plug(hotplug_dev, dev, errp); 1390 } 1391 } 1392 1393 static void pc_machine_device_unplug_request_cb(HotplugHandler *hotplug_dev, 1394 DeviceState *dev, Error **errp) 1395 { 1396 if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { 1397 pc_memory_unplug_request(hotplug_dev, dev, errp); 1398 } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { 1399 x86_cpu_unplug_request_cb(hotplug_dev, dev, errp); 1400 } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI) || 1401 object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_MEM_PCI)) { 1402 pc_virtio_md_pci_unplug_request(hotplug_dev, dev, errp); 1403 } else { 1404 error_setg(errp, "acpi: device unplug request for not supported device" 1405 " type: %s", object_get_typename(OBJECT(dev))); 1406 } 1407 } 1408 1409 static void pc_machine_device_unplug_cb(HotplugHandler *hotplug_dev, 1410 DeviceState *dev, Error **errp) 1411 { 1412 if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { 1413 pc_memory_unplug(hotplug_dev, dev, errp); 1414 } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { 1415 x86_cpu_unplug_cb(hotplug_dev, dev, errp); 1416 } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI) || 1417 object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_MEM_PCI)) { 1418 pc_virtio_md_pci_unplug(hotplug_dev, dev, errp); 1419 } else { 1420 error_setg(errp, "acpi: device unplug for not supported device" 1421 " type: %s", object_get_typename(OBJECT(dev))); 1422 } 1423 } 1424 1425 static HotplugHandler *pc_get_hotplug_handler(MachineState *machine, 1426 DeviceState *dev) 1427 { 1428 if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM) || 1429 object_dynamic_cast(OBJECT(dev), TYPE_CPU) || 1430 object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI) || 1431 object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_MEM_PCI)) { 1432 return HOTPLUG_HANDLER(machine); 1433 } 1434 1435 return NULL; 1436 } 1437 1438 static void 1439 pc_machine_get_device_memory_region_size(Object *obj, Visitor *v, 1440 const char *name, void *opaque, 1441 Error **errp) 1442 { 1443 MachineState *ms = MACHINE(obj); 1444 int64_t value = 0; 1445 1446 if (ms->device_memory) { 1447 value = memory_region_size(&ms->device_memory->mr); 1448 } 1449 1450 visit_type_int(v, name, &value, errp); 1451 } 1452 1453 static void pc_machine_get_vmport(Object *obj, Visitor *v, const char *name, 1454 void *opaque, Error **errp) 1455 { 1456 PCMachineState *pcms = PC_MACHINE(obj); 1457 OnOffAuto vmport = pcms->vmport; 1458 1459 visit_type_OnOffAuto(v, name, &vmport, errp); 1460 } 1461 1462 static void pc_machine_set_vmport(Object *obj, Visitor *v, const char *name, 1463 void *opaque, Error **errp) 1464 { 1465 PCMachineState *pcms = PC_MACHINE(obj); 1466 1467 visit_type_OnOffAuto(v, name, &pcms->vmport, errp); 1468 } 1469 1470 static bool pc_machine_get_smbus(Object *obj, Error **errp) 1471 { 1472 PCMachineState *pcms = PC_MACHINE(obj); 1473 1474 return pcms->smbus_enabled; 1475 } 1476 1477 static void pc_machine_set_smbus(Object *obj, bool value, Error **errp) 1478 { 1479 PCMachineState *pcms = PC_MACHINE(obj); 1480 1481 pcms->smbus_enabled = value; 1482 } 1483 1484 static bool pc_machine_get_sata(Object *obj, Error **errp) 1485 { 1486 PCMachineState *pcms = PC_MACHINE(obj); 1487 1488 return pcms->sata_enabled; 1489 } 1490 1491 static void pc_machine_set_sata(Object *obj, bool value, Error **errp) 1492 { 1493 PCMachineState *pcms = PC_MACHINE(obj); 1494 1495 pcms->sata_enabled = value; 1496 } 1497 1498 static bool pc_machine_get_pit(Object *obj, Error **errp) 1499 { 1500 PCMachineState *pcms = PC_MACHINE(obj); 1501 1502 return pcms->pit_enabled; 1503 } 1504 1505 static void pc_machine_set_pit(Object *obj, bool value, Error **errp) 1506 { 1507 PCMachineState *pcms = PC_MACHINE(obj); 1508 1509 pcms->pit_enabled = value; 1510 } 1511 1512 static bool pc_machine_get_hpet(Object *obj, Error **errp) 1513 { 1514 PCMachineState *pcms = PC_MACHINE(obj); 1515 1516 return pcms->hpet_enabled; 1517 } 1518 1519 static void pc_machine_set_hpet(Object *obj, bool value, Error **errp) 1520 { 1521 PCMachineState *pcms = PC_MACHINE(obj); 1522 1523 pcms->hpet_enabled = value; 1524 } 1525 1526 static bool pc_machine_get_default_bus_bypass_iommu(Object *obj, Error **errp) 1527 { 1528 PCMachineState *pcms = PC_MACHINE(obj); 1529 1530 return pcms->default_bus_bypass_iommu; 1531 } 1532 1533 static void pc_machine_set_default_bus_bypass_iommu(Object *obj, bool value, 1534 Error **errp) 1535 { 1536 PCMachineState *pcms = PC_MACHINE(obj); 1537 1538 pcms->default_bus_bypass_iommu = value; 1539 } 1540 1541 static void pc_machine_get_max_ram_below_4g(Object *obj, Visitor *v, 1542 const char *name, void *opaque, 1543 Error **errp) 1544 { 1545 PCMachineState *pcms = PC_MACHINE(obj); 1546 uint64_t value = pcms->max_ram_below_4g; 1547 1548 visit_type_size(v, name, &value, errp); 1549 } 1550 1551 static void pc_machine_set_max_ram_below_4g(Object *obj, Visitor *v, 1552 const char *name, void *opaque, 1553 Error **errp) 1554 { 1555 PCMachineState *pcms = PC_MACHINE(obj); 1556 uint64_t value; 1557 1558 if (!visit_type_size(v, name, &value, errp)) { 1559 return; 1560 } 1561 if (value > 4 * GiB) { 1562 error_setg(errp, 1563 "Machine option 'max-ram-below-4g=%"PRIu64 1564 "' expects size less than or equal to 4G", value); 1565 return; 1566 } 1567 1568 if (value < 1 * MiB) { 1569 warn_report("Only %" PRIu64 " bytes of RAM below the 4GiB boundary," 1570 "BIOS may not work with less than 1MiB", value); 1571 } 1572 1573 pcms->max_ram_below_4g = value; 1574 } 1575 1576 static void pc_machine_get_max_fw_size(Object *obj, Visitor *v, 1577 const char *name, void *opaque, 1578 Error **errp) 1579 { 1580 PCMachineState *pcms = PC_MACHINE(obj); 1581 uint64_t value = pcms->max_fw_size; 1582 1583 visit_type_size(v, name, &value, errp); 1584 } 1585 1586 static void pc_machine_set_max_fw_size(Object *obj, Visitor *v, 1587 const char *name, void *opaque, 1588 Error **errp) 1589 { 1590 PCMachineState *pcms = PC_MACHINE(obj); 1591 Error *error = NULL; 1592 uint64_t value; 1593 1594 visit_type_size(v, name, &value, &error); 1595 if (error) { 1596 error_propagate(errp, error); 1597 return; 1598 } 1599 1600 /* 1601 * We don't have a theoretically justifiable exact lower bound on the base 1602 * address of any flash mapping. In practice, the IO-APIC MMIO range is 1603 * [0xFEE00000..0xFEE01000] -- see IO_APIC_DEFAULT_ADDRESS --, leaving free 1604 * only 18MB-4KB below 4G. For now, restrict the cumulative mapping to 8MB in 1605 * size. 1606 */ 1607 if (value > 16 * MiB) { 1608 error_setg(errp, 1609 "User specified max allowed firmware size %" PRIu64 " is " 1610 "greater than 16MiB. If combined firwmare size exceeds " 1611 "16MiB the system may not boot, or experience intermittent" 1612 "stability issues.", 1613 value); 1614 return; 1615 } 1616 1617 pcms->max_fw_size = value; 1618 } 1619 1620 1621 static void pc_machine_initfn(Object *obj) 1622 { 1623 PCMachineState *pcms = PC_MACHINE(obj); 1624 1625 #ifdef CONFIG_VMPORT 1626 pcms->vmport = ON_OFF_AUTO_AUTO; 1627 #else 1628 pcms->vmport = ON_OFF_AUTO_OFF; 1629 #endif /* CONFIG_VMPORT */ 1630 pcms->max_ram_below_4g = 0; /* use default */ 1631 /* acpi build is enabled by default if machine supports it */ 1632 pcms->acpi_build_enabled = PC_MACHINE_GET_CLASS(pcms)->has_acpi_build; 1633 pcms->smbus_enabled = true; 1634 pcms->sata_enabled = true; 1635 pcms->pit_enabled = true; 1636 pcms->max_fw_size = 8 * MiB; 1637 #ifdef CONFIG_HPET 1638 pcms->hpet_enabled = true; 1639 #endif 1640 pcms->default_bus_bypass_iommu = false; 1641 1642 pc_system_flash_create(pcms); 1643 pcms->pcspk = isa_new(TYPE_PC_SPEAKER); 1644 object_property_add_alias(OBJECT(pcms), "pcspk-audiodev", 1645 OBJECT(pcms->pcspk), "audiodev"); 1646 } 1647 1648 static void pc_machine_reset(MachineState *machine) 1649 { 1650 CPUState *cs; 1651 X86CPU *cpu; 1652 1653 qemu_devices_reset(); 1654 1655 /* Reset APIC after devices have been reset to cancel 1656 * any changes that qemu_devices_reset() might have done. 1657 */ 1658 CPU_FOREACH(cs) { 1659 cpu = X86_CPU(cs); 1660 1661 if (cpu->apic_state) { 1662 device_legacy_reset(cpu->apic_state); 1663 } 1664 } 1665 } 1666 1667 static void pc_machine_wakeup(MachineState *machine) 1668 { 1669 cpu_synchronize_all_states(); 1670 pc_machine_reset(machine); 1671 cpu_synchronize_all_post_reset(); 1672 } 1673 1674 static bool pc_hotplug_allowed(MachineState *ms, DeviceState *dev, Error **errp) 1675 { 1676 X86IOMMUState *iommu = x86_iommu_get_default(); 1677 IntelIOMMUState *intel_iommu; 1678 1679 if (iommu && 1680 object_dynamic_cast((Object *)iommu, TYPE_INTEL_IOMMU_DEVICE) && 1681 object_dynamic_cast((Object *)dev, "vfio-pci")) { 1682 intel_iommu = INTEL_IOMMU_DEVICE(iommu); 1683 if (!intel_iommu->caching_mode) { 1684 error_setg(errp, "Device assignment is not allowed without " 1685 "enabling caching-mode=on for Intel IOMMU."); 1686 return false; 1687 } 1688 } 1689 1690 return true; 1691 } 1692 1693 static void pc_machine_class_init(ObjectClass *oc, void *data) 1694 { 1695 MachineClass *mc = MACHINE_CLASS(oc); 1696 PCMachineClass *pcmc = PC_MACHINE_CLASS(oc); 1697 HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(oc); 1698 1699 pcmc->pci_enabled = true; 1700 pcmc->has_acpi_build = true; 1701 pcmc->rsdp_in_ram = true; 1702 pcmc->smbios_defaults = true; 1703 pcmc->smbios_uuid_encoded = true; 1704 pcmc->gigabyte_align = true; 1705 pcmc->has_reserved_memory = true; 1706 pcmc->kvmclock_enabled = true; 1707 pcmc->enforce_aligned_dimm = true; 1708 /* BIOS ACPI tables: 128K. Other BIOS datastructures: less than 4K reported 1709 * to be used at the moment, 32K should be enough for a while. */ 1710 pcmc->acpi_data_size = 0x20000 + 0x8000; 1711 pcmc->linuxboot_dma_enabled = true; 1712 pcmc->pvh_enabled = true; 1713 pcmc->kvmclock_create_always = true; 1714 assert(!mc->get_hotplug_handler); 1715 mc->get_hotplug_handler = pc_get_hotplug_handler; 1716 mc->hotplug_allowed = pc_hotplug_allowed; 1717 mc->cpu_index_to_instance_props = x86_cpu_index_to_props; 1718 mc->get_default_cpu_node_id = x86_get_default_cpu_node_id; 1719 mc->possible_cpu_arch_ids = x86_possible_cpu_arch_ids; 1720 mc->auto_enable_numa_with_memhp = true; 1721 mc->auto_enable_numa_with_memdev = true; 1722 mc->has_hotpluggable_cpus = true; 1723 mc->default_boot_order = "cad"; 1724 mc->smp_parse = pc_smp_parse; 1725 mc->block_default_type = IF_IDE; 1726 mc->max_cpus = 255; 1727 mc->reset = pc_machine_reset; 1728 mc->wakeup = pc_machine_wakeup; 1729 hc->pre_plug = pc_machine_device_pre_plug_cb; 1730 hc->plug = pc_machine_device_plug_cb; 1731 hc->unplug_request = pc_machine_device_unplug_request_cb; 1732 hc->unplug = pc_machine_device_unplug_cb; 1733 mc->default_cpu_type = TARGET_DEFAULT_CPU_TYPE; 1734 mc->nvdimm_supported = true; 1735 mc->default_ram_id = "pc.ram"; 1736 1737 object_class_property_add(oc, PC_MACHINE_MAX_RAM_BELOW_4G, "size", 1738 pc_machine_get_max_ram_below_4g, pc_machine_set_max_ram_below_4g, 1739 NULL, NULL); 1740 object_class_property_set_description(oc, PC_MACHINE_MAX_RAM_BELOW_4G, 1741 "Maximum ram below the 4G boundary (32bit boundary)"); 1742 1743 object_class_property_add(oc, PC_MACHINE_DEVMEM_REGION_SIZE, "int", 1744 pc_machine_get_device_memory_region_size, NULL, 1745 NULL, NULL); 1746 1747 object_class_property_add(oc, PC_MACHINE_VMPORT, "OnOffAuto", 1748 pc_machine_get_vmport, pc_machine_set_vmport, 1749 NULL, NULL); 1750 object_class_property_set_description(oc, PC_MACHINE_VMPORT, 1751 "Enable vmport (pc & q35)"); 1752 1753 object_class_property_add_bool(oc, PC_MACHINE_SMBUS, 1754 pc_machine_get_smbus, pc_machine_set_smbus); 1755 1756 object_class_property_add_bool(oc, PC_MACHINE_SATA, 1757 pc_machine_get_sata, pc_machine_set_sata); 1758 1759 object_class_property_add_bool(oc, PC_MACHINE_PIT, 1760 pc_machine_get_pit, pc_machine_set_pit); 1761 1762 object_class_property_add_bool(oc, "hpet", 1763 pc_machine_get_hpet, pc_machine_set_hpet); 1764 1765 object_class_property_add_bool(oc, "default_bus_bypass_iommu", 1766 pc_machine_get_default_bus_bypass_iommu, 1767 pc_machine_set_default_bus_bypass_iommu); 1768 1769 object_class_property_add(oc, PC_MACHINE_MAX_FW_SIZE, "size", 1770 pc_machine_get_max_fw_size, pc_machine_set_max_fw_size, 1771 NULL, NULL); 1772 object_class_property_set_description(oc, PC_MACHINE_MAX_FW_SIZE, 1773 "Maximum combined firmware size"); 1774 } 1775 1776 static const TypeInfo pc_machine_info = { 1777 .name = TYPE_PC_MACHINE, 1778 .parent = TYPE_X86_MACHINE, 1779 .abstract = true, 1780 .instance_size = sizeof(PCMachineState), 1781 .instance_init = pc_machine_initfn, 1782 .class_size = sizeof(PCMachineClass), 1783 .class_init = pc_machine_class_init, 1784 .interfaces = (InterfaceInfo[]) { 1785 { TYPE_HOTPLUG_HANDLER }, 1786 { } 1787 }, 1788 }; 1789 1790 static void pc_machine_register_types(void) 1791 { 1792 type_register_static(&pc_machine_info); 1793 } 1794 1795 type_init(pc_machine_register_types) 1796