1 /* 2 * QEMU PC System Emulator 3 * 4 * Copyright (c) 2003-2004 Fabrice Bellard 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a copy 7 * of this software and associated documentation files (the "Software"), to deal 8 * in the Software without restriction, including without limitation the rights 9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 * copies of the Software, and to permit persons to whom the Software is 11 * furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice shall be included in 14 * all copies or substantial portions of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 22 * THE SOFTWARE. 23 */ 24 25 #include "qemu/osdep.h" 26 #include "qemu/units.h" 27 #include "hw/i386/x86.h" 28 #include "hw/i386/pc.h" 29 #include "hw/char/serial.h" 30 #include "hw/char/parallel.h" 31 #include "hw/i386/apic.h" 32 #include "hw/i386/topology.h" 33 #include "hw/i386/fw_cfg.h" 34 #include "sysemu/cpus.h" 35 #include "hw/block/fdc.h" 36 #include "hw/ide.h" 37 #include "hw/pci/pci.h" 38 #include "hw/pci/pci_bus.h" 39 #include "hw/nvram/fw_cfg.h" 40 #include "hw/timer/hpet.h" 41 #include "hw/firmware/smbios.h" 42 #include "hw/loader.h" 43 #include "elf.h" 44 #include "migration/vmstate.h" 45 #include "multiboot.h" 46 #include "hw/rtc/mc146818rtc.h" 47 #include "hw/intc/i8259.h" 48 #include "hw/dma/i8257.h" 49 #include "hw/timer/i8254.h" 50 #include "hw/input/i8042.h" 51 #include "hw/irq.h" 52 #include "hw/audio/pcspk.h" 53 #include "hw/pci/msi.h" 54 #include "hw/sysbus.h" 55 #include "sysemu/sysemu.h" 56 #include "sysemu/tcg.h" 57 #include "sysemu/numa.h" 58 #include "sysemu/kvm.h" 59 #include "sysemu/qtest.h" 60 #include "sysemu/reset.h" 61 #include "sysemu/runstate.h" 62 #include "kvm_i386.h" 63 #include "hw/xen/xen.h" 64 #include "hw/xen/start_info.h" 65 #include "ui/qemu-spice.h" 66 #include "exec/memory.h" 67 #include "exec/address-spaces.h" 68 #include "sysemu/arch_init.h" 69 #include "qemu/bitmap.h" 70 #include "qemu/config-file.h" 71 #include "qemu/error-report.h" 72 #include "qemu/option.h" 73 #include "qemu/cutils.h" 74 #include "hw/acpi/acpi.h" 75 #include "hw/acpi/cpu_hotplug.h" 76 #include "hw/boards.h" 77 #include "acpi-build.h" 78 #include "hw/mem/pc-dimm.h" 79 #include "qapi/error.h" 80 #include "qapi/qapi-visit-common.h" 81 #include "qapi/visitor.h" 82 #include "hw/core/cpu.h" 83 #include "hw/usb.h" 84 #include "hw/i386/intel_iommu.h" 85 #include "hw/net/ne2000-isa.h" 86 #include "standard-headers/asm-x86/bootparam.h" 87 #include "hw/virtio/virtio-pmem-pci.h" 88 #include "hw/mem/memory-device.h" 89 #include "sysemu/replay.h" 90 #include "qapi/qmp/qerror.h" 91 #include "config-devices.h" 92 #include "e820_memory_layout.h" 93 #include "fw_cfg.h" 94 #include "trace.h" 95 96 GlobalProperty pc_compat_4_2[] = {}; 97 const size_t pc_compat_4_2_len = G_N_ELEMENTS(pc_compat_4_2); 98 99 GlobalProperty pc_compat_4_1[] = {}; 100 const size_t pc_compat_4_1_len = G_N_ELEMENTS(pc_compat_4_1); 101 102 GlobalProperty pc_compat_4_0[] = {}; 103 const size_t pc_compat_4_0_len = G_N_ELEMENTS(pc_compat_4_0); 104 105 GlobalProperty pc_compat_3_1[] = { 106 { "intel-iommu", "dma-drain", "off" }, 107 { "Opteron_G3" "-" TYPE_X86_CPU, "rdtscp", "off" }, 108 { "Opteron_G4" "-" TYPE_X86_CPU, "rdtscp", "off" }, 109 { "Opteron_G4" "-" TYPE_X86_CPU, "npt", "off" }, 110 { "Opteron_G4" "-" TYPE_X86_CPU, "nrip-save", "off" }, 111 { "Opteron_G5" "-" TYPE_X86_CPU, "rdtscp", "off" }, 112 { "Opteron_G5" "-" TYPE_X86_CPU, "npt", "off" }, 113 { "Opteron_G5" "-" TYPE_X86_CPU, "nrip-save", "off" }, 114 { "EPYC" "-" TYPE_X86_CPU, "npt", "off" }, 115 { "EPYC" "-" TYPE_X86_CPU, "nrip-save", "off" }, 116 { "EPYC-IBPB" "-" TYPE_X86_CPU, "npt", "off" }, 117 { "EPYC-IBPB" "-" TYPE_X86_CPU, "nrip-save", "off" }, 118 { "Skylake-Client" "-" TYPE_X86_CPU, "mpx", "on" }, 119 { "Skylake-Client-IBRS" "-" TYPE_X86_CPU, "mpx", "on" }, 120 { "Skylake-Server" "-" TYPE_X86_CPU, "mpx", "on" }, 121 { "Skylake-Server-IBRS" "-" TYPE_X86_CPU, "mpx", "on" }, 122 { "Cascadelake-Server" "-" TYPE_X86_CPU, "mpx", "on" }, 123 { "Icelake-Client" "-" TYPE_X86_CPU, "mpx", "on" }, 124 { "Icelake-Server" "-" TYPE_X86_CPU, "mpx", "on" }, 125 { "Cascadelake-Server" "-" TYPE_X86_CPU, "stepping", "5" }, 126 { TYPE_X86_CPU, "x-intel-pt-auto-level", "off" }, 127 }; 128 const size_t pc_compat_3_1_len = G_N_ELEMENTS(pc_compat_3_1); 129 130 GlobalProperty pc_compat_3_0[] = { 131 { TYPE_X86_CPU, "x-hv-synic-kvm-only", "on" }, 132 { "Skylake-Server" "-" TYPE_X86_CPU, "pku", "off" }, 133 { "Skylake-Server-IBRS" "-" TYPE_X86_CPU, "pku", "off" }, 134 }; 135 const size_t pc_compat_3_0_len = G_N_ELEMENTS(pc_compat_3_0); 136 137 GlobalProperty pc_compat_2_12[] = { 138 { TYPE_X86_CPU, "legacy-cache", "on" }, 139 { TYPE_X86_CPU, "topoext", "off" }, 140 { "EPYC-" TYPE_X86_CPU, "xlevel", "0x8000000a" }, 141 { "EPYC-IBPB-" TYPE_X86_CPU, "xlevel", "0x8000000a" }, 142 }; 143 const size_t pc_compat_2_12_len = G_N_ELEMENTS(pc_compat_2_12); 144 145 GlobalProperty pc_compat_2_11[] = { 146 { TYPE_X86_CPU, "x-migrate-smi-count", "off" }, 147 { "Skylake-Server" "-" TYPE_X86_CPU, "clflushopt", "off" }, 148 }; 149 const size_t pc_compat_2_11_len = G_N_ELEMENTS(pc_compat_2_11); 150 151 GlobalProperty pc_compat_2_10[] = { 152 { TYPE_X86_CPU, "x-hv-max-vps", "0x40" }, 153 { "i440FX-pcihost", "x-pci-hole64-fix", "off" }, 154 { "q35-pcihost", "x-pci-hole64-fix", "off" }, 155 }; 156 const size_t pc_compat_2_10_len = G_N_ELEMENTS(pc_compat_2_10); 157 158 GlobalProperty pc_compat_2_9[] = { 159 { "mch", "extended-tseg-mbytes", "0" }, 160 }; 161 const size_t pc_compat_2_9_len = G_N_ELEMENTS(pc_compat_2_9); 162 163 GlobalProperty pc_compat_2_8[] = { 164 { TYPE_X86_CPU, "tcg-cpuid", "off" }, 165 { "kvmclock", "x-mach-use-reliable-get-clock", "off" }, 166 { "ICH9-LPC", "x-smi-broadcast", "off" }, 167 { TYPE_X86_CPU, "vmware-cpuid-freq", "off" }, 168 { "Haswell-" TYPE_X86_CPU, "stepping", "1" }, 169 }; 170 const size_t pc_compat_2_8_len = G_N_ELEMENTS(pc_compat_2_8); 171 172 GlobalProperty pc_compat_2_7[] = { 173 { TYPE_X86_CPU, "l3-cache", "off" }, 174 { TYPE_X86_CPU, "full-cpuid-auto-level", "off" }, 175 { "Opteron_G3" "-" TYPE_X86_CPU, "family", "15" }, 176 { "Opteron_G3" "-" TYPE_X86_CPU, "model", "6" }, 177 { "Opteron_G3" "-" TYPE_X86_CPU, "stepping", "1" }, 178 { "isa-pcspk", "migrate", "off" }, 179 }; 180 const size_t pc_compat_2_7_len = G_N_ELEMENTS(pc_compat_2_7); 181 182 GlobalProperty pc_compat_2_6[] = { 183 { TYPE_X86_CPU, "cpuid-0xb", "off" }, 184 { "vmxnet3", "romfile", "" }, 185 { TYPE_X86_CPU, "fill-mtrr-mask", "off" }, 186 { "apic-common", "legacy-instance-id", "on", } 187 }; 188 const size_t pc_compat_2_6_len = G_N_ELEMENTS(pc_compat_2_6); 189 190 GlobalProperty pc_compat_2_5[] = {}; 191 const size_t pc_compat_2_5_len = G_N_ELEMENTS(pc_compat_2_5); 192 193 GlobalProperty pc_compat_2_4[] = { 194 PC_CPU_MODEL_IDS("2.4.0") 195 { "Haswell-" TYPE_X86_CPU, "abm", "off" }, 196 { "Haswell-noTSX-" TYPE_X86_CPU, "abm", "off" }, 197 { "Broadwell-" TYPE_X86_CPU, "abm", "off" }, 198 { "Broadwell-noTSX-" TYPE_X86_CPU, "abm", "off" }, 199 { "host" "-" TYPE_X86_CPU, "host-cache-info", "on" }, 200 { TYPE_X86_CPU, "check", "off" }, 201 { "qemu64" "-" TYPE_X86_CPU, "sse4a", "on" }, 202 { "qemu64" "-" TYPE_X86_CPU, "abm", "on" }, 203 { "qemu64" "-" TYPE_X86_CPU, "popcnt", "on" }, 204 { "qemu32" "-" TYPE_X86_CPU, "popcnt", "on" }, 205 { "Opteron_G2" "-" TYPE_X86_CPU, "rdtscp", "on" }, 206 { "Opteron_G3" "-" TYPE_X86_CPU, "rdtscp", "on" }, 207 { "Opteron_G4" "-" TYPE_X86_CPU, "rdtscp", "on" }, 208 { "Opteron_G5" "-" TYPE_X86_CPU, "rdtscp", "on", } 209 }; 210 const size_t pc_compat_2_4_len = G_N_ELEMENTS(pc_compat_2_4); 211 212 GlobalProperty pc_compat_2_3[] = { 213 PC_CPU_MODEL_IDS("2.3.0") 214 { TYPE_X86_CPU, "arat", "off" }, 215 { "qemu64" "-" TYPE_X86_CPU, "min-level", "4" }, 216 { "kvm64" "-" TYPE_X86_CPU, "min-level", "5" }, 217 { "pentium3" "-" TYPE_X86_CPU, "min-level", "2" }, 218 { "n270" "-" TYPE_X86_CPU, "min-level", "5" }, 219 { "Conroe" "-" TYPE_X86_CPU, "min-level", "4" }, 220 { "Penryn" "-" TYPE_X86_CPU, "min-level", "4" }, 221 { "Nehalem" "-" TYPE_X86_CPU, "min-level", "4" }, 222 { "n270" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 223 { "Penryn" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 224 { "Conroe" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 225 { "Nehalem" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 226 { "Westmere" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 227 { "SandyBridge" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 228 { "IvyBridge" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 229 { "Haswell" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 230 { "Haswell-noTSX" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 231 { "Broadwell" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 232 { "Broadwell-noTSX" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" }, 233 { TYPE_X86_CPU, "kvm-no-smi-migration", "on" }, 234 }; 235 const size_t pc_compat_2_3_len = G_N_ELEMENTS(pc_compat_2_3); 236 237 GlobalProperty pc_compat_2_2[] = { 238 PC_CPU_MODEL_IDS("2.2.0") 239 { "kvm64" "-" TYPE_X86_CPU, "vme", "off" }, 240 { "kvm32" "-" TYPE_X86_CPU, "vme", "off" }, 241 { "Conroe" "-" TYPE_X86_CPU, "vme", "off" }, 242 { "Penryn" "-" TYPE_X86_CPU, "vme", "off" }, 243 { "Nehalem" "-" TYPE_X86_CPU, "vme", "off" }, 244 { "Westmere" "-" TYPE_X86_CPU, "vme", "off" }, 245 { "SandyBridge" "-" TYPE_X86_CPU, "vme", "off" }, 246 { "Haswell" "-" TYPE_X86_CPU, "vme", "off" }, 247 { "Broadwell" "-" TYPE_X86_CPU, "vme", "off" }, 248 { "Opteron_G1" "-" TYPE_X86_CPU, "vme", "off" }, 249 { "Opteron_G2" "-" TYPE_X86_CPU, "vme", "off" }, 250 { "Opteron_G3" "-" TYPE_X86_CPU, "vme", "off" }, 251 { "Opteron_G4" "-" TYPE_X86_CPU, "vme", "off" }, 252 { "Opteron_G5" "-" TYPE_X86_CPU, "vme", "off" }, 253 { "Haswell" "-" TYPE_X86_CPU, "f16c", "off" }, 254 { "Haswell" "-" TYPE_X86_CPU, "rdrand", "off" }, 255 { "Broadwell" "-" TYPE_X86_CPU, "f16c", "off" }, 256 { "Broadwell" "-" TYPE_X86_CPU, "rdrand", "off" }, 257 }; 258 const size_t pc_compat_2_2_len = G_N_ELEMENTS(pc_compat_2_2); 259 260 GlobalProperty pc_compat_2_1[] = { 261 PC_CPU_MODEL_IDS("2.1.0") 262 { "coreduo" "-" TYPE_X86_CPU, "vmx", "on" }, 263 { "core2duo" "-" TYPE_X86_CPU, "vmx", "on" }, 264 }; 265 const size_t pc_compat_2_1_len = G_N_ELEMENTS(pc_compat_2_1); 266 267 GlobalProperty pc_compat_2_0[] = { 268 PC_CPU_MODEL_IDS("2.0.0") 269 { "virtio-scsi-pci", "any_layout", "off" }, 270 { "PIIX4_PM", "memory-hotplug-support", "off" }, 271 { "apic", "version", "0x11" }, 272 { "nec-usb-xhci", "superspeed-ports-first", "off" }, 273 { "nec-usb-xhci", "force-pcie-endcap", "on" }, 274 { "pci-serial", "prog_if", "0" }, 275 { "pci-serial-2x", "prog_if", "0" }, 276 { "pci-serial-4x", "prog_if", "0" }, 277 { "virtio-net-pci", "guest_announce", "off" }, 278 { "ICH9-LPC", "memory-hotplug-support", "off" }, 279 { "xio3130-downstream", COMPAT_PROP_PCP, "off" }, 280 { "ioh3420", COMPAT_PROP_PCP, "off" }, 281 }; 282 const size_t pc_compat_2_0_len = G_N_ELEMENTS(pc_compat_2_0); 283 284 GlobalProperty pc_compat_1_7[] = { 285 PC_CPU_MODEL_IDS("1.7.0") 286 { TYPE_USB_DEVICE, "msos-desc", "no" }, 287 { "PIIX4_PM", "acpi-pci-hotplug-with-bridge-support", "off" }, 288 { "hpet", HPET_INTCAP, "4" }, 289 }; 290 const size_t pc_compat_1_7_len = G_N_ELEMENTS(pc_compat_1_7); 291 292 GlobalProperty pc_compat_1_6[] = { 293 PC_CPU_MODEL_IDS("1.6.0") 294 { "e1000", "mitigation", "off" }, 295 { "qemu64-" TYPE_X86_CPU, "model", "2" }, 296 { "qemu32-" TYPE_X86_CPU, "model", "3" }, 297 { "i440FX-pcihost", "short_root_bus", "1" }, 298 { "q35-pcihost", "short_root_bus", "1" }, 299 }; 300 const size_t pc_compat_1_6_len = G_N_ELEMENTS(pc_compat_1_6); 301 302 GlobalProperty pc_compat_1_5[] = { 303 PC_CPU_MODEL_IDS("1.5.0") 304 { "Conroe-" TYPE_X86_CPU, "model", "2" }, 305 { "Conroe-" TYPE_X86_CPU, "min-level", "2" }, 306 { "Penryn-" TYPE_X86_CPU, "model", "2" }, 307 { "Penryn-" TYPE_X86_CPU, "min-level", "2" }, 308 { "Nehalem-" TYPE_X86_CPU, "model", "2" }, 309 { "Nehalem-" TYPE_X86_CPU, "min-level", "2" }, 310 { "virtio-net-pci", "any_layout", "off" }, 311 { TYPE_X86_CPU, "pmu", "on" }, 312 { "i440FX-pcihost", "short_root_bus", "0" }, 313 { "q35-pcihost", "short_root_bus", "0" }, 314 }; 315 const size_t pc_compat_1_5_len = G_N_ELEMENTS(pc_compat_1_5); 316 317 GlobalProperty pc_compat_1_4[] = { 318 PC_CPU_MODEL_IDS("1.4.0") 319 { "scsi-hd", "discard_granularity", "0" }, 320 { "scsi-cd", "discard_granularity", "0" }, 321 { "scsi-disk", "discard_granularity", "0" }, 322 { "ide-hd", "discard_granularity", "0" }, 323 { "ide-cd", "discard_granularity", "0" }, 324 { "ide-drive", "discard_granularity", "0" }, 325 { "virtio-blk-pci", "discard_granularity", "0" }, 326 /* DEV_NVECTORS_UNSPECIFIED as a uint32_t string: */ 327 { "virtio-serial-pci", "vectors", "0xFFFFFFFF" }, 328 { "virtio-net-pci", "ctrl_guest_offloads", "off" }, 329 { "e1000", "romfile", "pxe-e1000.rom" }, 330 { "ne2k_pci", "romfile", "pxe-ne2k_pci.rom" }, 331 { "pcnet", "romfile", "pxe-pcnet.rom" }, 332 { "rtl8139", "romfile", "pxe-rtl8139.rom" }, 333 { "virtio-net-pci", "romfile", "pxe-virtio.rom" }, 334 { "486-" TYPE_X86_CPU, "model", "0" }, 335 { "n270" "-" TYPE_X86_CPU, "movbe", "off" }, 336 { "Westmere" "-" TYPE_X86_CPU, "pclmulqdq", "off" }, 337 }; 338 const size_t pc_compat_1_4_len = G_N_ELEMENTS(pc_compat_1_4); 339 340 GSIState *pc_gsi_create(qemu_irq **irqs, bool pci_enabled) 341 { 342 GSIState *s; 343 344 s = g_new0(GSIState, 1); 345 if (kvm_ioapic_in_kernel()) { 346 kvm_pc_setup_irq_routing(pci_enabled); 347 } 348 *irqs = qemu_allocate_irqs(gsi_handler, s, GSI_NUM_PINS); 349 350 return s; 351 } 352 353 static void ioport80_write(void *opaque, hwaddr addr, uint64_t data, 354 unsigned size) 355 { 356 } 357 358 static uint64_t ioport80_read(void *opaque, hwaddr addr, unsigned size) 359 { 360 return 0xffffffffffffffffULL; 361 } 362 363 /* MSDOS compatibility mode FPU exception support */ 364 static void ioportF0_write(void *opaque, hwaddr addr, uint64_t data, 365 unsigned size) 366 { 367 if (tcg_enabled()) { 368 cpu_set_ignne(); 369 } 370 } 371 372 static uint64_t ioportF0_read(void *opaque, hwaddr addr, unsigned size) 373 { 374 return 0xffffffffffffffffULL; 375 } 376 377 /* PC cmos mappings */ 378 379 #define REG_EQUIPMENT_BYTE 0x14 380 381 int cmos_get_fd_drive_type(FloppyDriveType fd0) 382 { 383 int val; 384 385 switch (fd0) { 386 case FLOPPY_DRIVE_TYPE_144: 387 /* 1.44 Mb 3"5 drive */ 388 val = 4; 389 break; 390 case FLOPPY_DRIVE_TYPE_288: 391 /* 2.88 Mb 3"5 drive */ 392 val = 5; 393 break; 394 case FLOPPY_DRIVE_TYPE_120: 395 /* 1.2 Mb 5"5 drive */ 396 val = 2; 397 break; 398 case FLOPPY_DRIVE_TYPE_NONE: 399 default: 400 val = 0; 401 break; 402 } 403 return val; 404 } 405 406 static void cmos_init_hd(ISADevice *s, int type_ofs, int info_ofs, 407 int16_t cylinders, int8_t heads, int8_t sectors) 408 { 409 rtc_set_memory(s, type_ofs, 47); 410 rtc_set_memory(s, info_ofs, cylinders); 411 rtc_set_memory(s, info_ofs + 1, cylinders >> 8); 412 rtc_set_memory(s, info_ofs + 2, heads); 413 rtc_set_memory(s, info_ofs + 3, 0xff); 414 rtc_set_memory(s, info_ofs + 4, 0xff); 415 rtc_set_memory(s, info_ofs + 5, 0xc0 | ((heads > 8) << 3)); 416 rtc_set_memory(s, info_ofs + 6, cylinders); 417 rtc_set_memory(s, info_ofs + 7, cylinders >> 8); 418 rtc_set_memory(s, info_ofs + 8, sectors); 419 } 420 421 /* convert boot_device letter to something recognizable by the bios */ 422 static int boot_device2nibble(char boot_device) 423 { 424 switch(boot_device) { 425 case 'a': 426 case 'b': 427 return 0x01; /* floppy boot */ 428 case 'c': 429 return 0x02; /* hard drive boot */ 430 case 'd': 431 return 0x03; /* CD-ROM boot */ 432 case 'n': 433 return 0x04; /* Network boot */ 434 } 435 return 0; 436 } 437 438 static void set_boot_dev(ISADevice *s, const char *boot_device, Error **errp) 439 { 440 #define PC_MAX_BOOT_DEVICES 3 441 int nbds, bds[3] = { 0, }; 442 int i; 443 444 nbds = strlen(boot_device); 445 if (nbds > PC_MAX_BOOT_DEVICES) { 446 error_setg(errp, "Too many boot devices for PC"); 447 return; 448 } 449 for (i = 0; i < nbds; i++) { 450 bds[i] = boot_device2nibble(boot_device[i]); 451 if (bds[i] == 0) { 452 error_setg(errp, "Invalid boot device for PC: '%c'", 453 boot_device[i]); 454 return; 455 } 456 } 457 rtc_set_memory(s, 0x3d, (bds[1] << 4) | bds[0]); 458 rtc_set_memory(s, 0x38, (bds[2] << 4) | (fd_bootchk ? 0x0 : 0x1)); 459 } 460 461 static void pc_boot_set(void *opaque, const char *boot_device, Error **errp) 462 { 463 set_boot_dev(opaque, boot_device, errp); 464 } 465 466 static void pc_cmos_init_floppy(ISADevice *rtc_state, ISADevice *floppy) 467 { 468 int val, nb, i; 469 FloppyDriveType fd_type[2] = { FLOPPY_DRIVE_TYPE_NONE, 470 FLOPPY_DRIVE_TYPE_NONE }; 471 472 /* floppy type */ 473 if (floppy) { 474 for (i = 0; i < 2; i++) { 475 fd_type[i] = isa_fdc_get_drive_type(floppy, i); 476 } 477 } 478 val = (cmos_get_fd_drive_type(fd_type[0]) << 4) | 479 cmos_get_fd_drive_type(fd_type[1]); 480 rtc_set_memory(rtc_state, 0x10, val); 481 482 val = rtc_get_memory(rtc_state, REG_EQUIPMENT_BYTE); 483 nb = 0; 484 if (fd_type[0] != FLOPPY_DRIVE_TYPE_NONE) { 485 nb++; 486 } 487 if (fd_type[1] != FLOPPY_DRIVE_TYPE_NONE) { 488 nb++; 489 } 490 switch (nb) { 491 case 0: 492 break; 493 case 1: 494 val |= 0x01; /* 1 drive, ready for boot */ 495 break; 496 case 2: 497 val |= 0x41; /* 2 drives, ready for boot */ 498 break; 499 } 500 rtc_set_memory(rtc_state, REG_EQUIPMENT_BYTE, val); 501 } 502 503 typedef struct pc_cmos_init_late_arg { 504 ISADevice *rtc_state; 505 BusState *idebus[2]; 506 } pc_cmos_init_late_arg; 507 508 typedef struct check_fdc_state { 509 ISADevice *floppy; 510 bool multiple; 511 } CheckFdcState; 512 513 static int check_fdc(Object *obj, void *opaque) 514 { 515 CheckFdcState *state = opaque; 516 Object *fdc; 517 uint32_t iobase; 518 Error *local_err = NULL; 519 520 fdc = object_dynamic_cast(obj, TYPE_ISA_FDC); 521 if (!fdc) { 522 return 0; 523 } 524 525 iobase = object_property_get_uint(obj, "iobase", &local_err); 526 if (local_err || iobase != 0x3f0) { 527 error_free(local_err); 528 return 0; 529 } 530 531 if (state->floppy) { 532 state->multiple = true; 533 } else { 534 state->floppy = ISA_DEVICE(obj); 535 } 536 return 0; 537 } 538 539 static const char * const fdc_container_path[] = { 540 "/unattached", "/peripheral", "/peripheral-anon" 541 }; 542 543 /* 544 * Locate the FDC at IO address 0x3f0, in order to configure the CMOS registers 545 * and ACPI objects. 546 */ 547 ISADevice *pc_find_fdc0(void) 548 { 549 int i; 550 Object *container; 551 CheckFdcState state = { 0 }; 552 553 for (i = 0; i < ARRAY_SIZE(fdc_container_path); i++) { 554 container = container_get(qdev_get_machine(), fdc_container_path[i]); 555 object_child_foreach(container, check_fdc, &state); 556 } 557 558 if (state.multiple) { 559 warn_report("multiple floppy disk controllers with " 560 "iobase=0x3f0 have been found"); 561 error_printf("the one being picked for CMOS setup might not reflect " 562 "your intent"); 563 } 564 565 return state.floppy; 566 } 567 568 static void pc_cmos_init_late(void *opaque) 569 { 570 pc_cmos_init_late_arg *arg = opaque; 571 ISADevice *s = arg->rtc_state; 572 int16_t cylinders; 573 int8_t heads, sectors; 574 int val; 575 int i, trans; 576 577 val = 0; 578 if (arg->idebus[0] && ide_get_geometry(arg->idebus[0], 0, 579 &cylinders, &heads, §ors) >= 0) { 580 cmos_init_hd(s, 0x19, 0x1b, cylinders, heads, sectors); 581 val |= 0xf0; 582 } 583 if (arg->idebus[0] && ide_get_geometry(arg->idebus[0], 1, 584 &cylinders, &heads, §ors) >= 0) { 585 cmos_init_hd(s, 0x1a, 0x24, cylinders, heads, sectors); 586 val |= 0x0f; 587 } 588 rtc_set_memory(s, 0x12, val); 589 590 val = 0; 591 for (i = 0; i < 4; i++) { 592 /* NOTE: ide_get_geometry() returns the physical 593 geometry. It is always such that: 1 <= sects <= 63, 1 594 <= heads <= 16, 1 <= cylinders <= 16383. The BIOS 595 geometry can be different if a translation is done. */ 596 if (arg->idebus[i / 2] && 597 ide_get_geometry(arg->idebus[i / 2], i % 2, 598 &cylinders, &heads, §ors) >= 0) { 599 trans = ide_get_bios_chs_trans(arg->idebus[i / 2], i % 2) - 1; 600 assert((trans & ~3) == 0); 601 val |= trans << (i * 2); 602 } 603 } 604 rtc_set_memory(s, 0x39, val); 605 606 pc_cmos_init_floppy(s, pc_find_fdc0()); 607 608 qemu_unregister_reset(pc_cmos_init_late, opaque); 609 } 610 611 void pc_cmos_init(PCMachineState *pcms, 612 BusState *idebus0, BusState *idebus1, 613 ISADevice *s) 614 { 615 int val; 616 static pc_cmos_init_late_arg arg; 617 X86MachineState *x86ms = X86_MACHINE(pcms); 618 619 /* various important CMOS locations needed by PC/Bochs bios */ 620 621 /* memory size */ 622 /* base memory (first MiB) */ 623 val = MIN(x86ms->below_4g_mem_size / KiB, 640); 624 rtc_set_memory(s, 0x15, val); 625 rtc_set_memory(s, 0x16, val >> 8); 626 /* extended memory (next 64MiB) */ 627 if (x86ms->below_4g_mem_size > 1 * MiB) { 628 val = (x86ms->below_4g_mem_size - 1 * MiB) / KiB; 629 } else { 630 val = 0; 631 } 632 if (val > 65535) 633 val = 65535; 634 rtc_set_memory(s, 0x17, val); 635 rtc_set_memory(s, 0x18, val >> 8); 636 rtc_set_memory(s, 0x30, val); 637 rtc_set_memory(s, 0x31, val >> 8); 638 /* memory between 16MiB and 4GiB */ 639 if (x86ms->below_4g_mem_size > 16 * MiB) { 640 val = (x86ms->below_4g_mem_size - 16 * MiB) / (64 * KiB); 641 } else { 642 val = 0; 643 } 644 if (val > 65535) 645 val = 65535; 646 rtc_set_memory(s, 0x34, val); 647 rtc_set_memory(s, 0x35, val >> 8); 648 /* memory above 4GiB */ 649 val = x86ms->above_4g_mem_size / 65536; 650 rtc_set_memory(s, 0x5b, val); 651 rtc_set_memory(s, 0x5c, val >> 8); 652 rtc_set_memory(s, 0x5d, val >> 16); 653 654 object_property_add_link(OBJECT(pcms), "rtc_state", 655 TYPE_ISA_DEVICE, 656 (Object **)&x86ms->rtc, 657 object_property_allow_set_link, 658 OBJ_PROP_LINK_STRONG, &error_abort); 659 object_property_set_link(OBJECT(pcms), OBJECT(s), 660 "rtc_state", &error_abort); 661 662 set_boot_dev(s, MACHINE(pcms)->boot_order, &error_fatal); 663 664 val = 0; 665 val |= 0x02; /* FPU is there */ 666 val |= 0x04; /* PS/2 mouse installed */ 667 rtc_set_memory(s, REG_EQUIPMENT_BYTE, val); 668 669 /* hard drives and FDC */ 670 arg.rtc_state = s; 671 arg.idebus[0] = idebus0; 672 arg.idebus[1] = idebus1; 673 qemu_register_reset(pc_cmos_init_late, &arg); 674 } 675 676 static void handle_a20_line_change(void *opaque, int irq, int level) 677 { 678 X86CPU *cpu = opaque; 679 680 /* XXX: send to all CPUs ? */ 681 /* XXX: add logic to handle multiple A20 line sources */ 682 x86_cpu_set_a20(cpu, level); 683 } 684 685 #define NE2000_NB_MAX 6 686 687 static const int ne2000_io[NE2000_NB_MAX] = { 0x300, 0x320, 0x340, 0x360, 688 0x280, 0x380 }; 689 static const int ne2000_irq[NE2000_NB_MAX] = { 9, 10, 11, 3, 4, 5 }; 690 691 void pc_init_ne2k_isa(ISABus *bus, NICInfo *nd) 692 { 693 static int nb_ne2k = 0; 694 695 if (nb_ne2k == NE2000_NB_MAX) 696 return; 697 isa_ne2000_init(bus, ne2000_io[nb_ne2k], 698 ne2000_irq[nb_ne2k], nd); 699 nb_ne2k++; 700 } 701 702 void pc_acpi_smi_interrupt(void *opaque, int irq, int level) 703 { 704 X86CPU *cpu = opaque; 705 706 if (level) { 707 cpu_interrupt(CPU(cpu), CPU_INTERRUPT_SMI); 708 } 709 } 710 711 /* 712 * This function is very similar to smp_parse() 713 * in hw/core/machine.c but includes CPU die support. 714 */ 715 void pc_smp_parse(MachineState *ms, QemuOpts *opts) 716 { 717 X86MachineState *x86ms = X86_MACHINE(ms); 718 719 if (opts) { 720 unsigned cpus = qemu_opt_get_number(opts, "cpus", 0); 721 unsigned sockets = qemu_opt_get_number(opts, "sockets", 0); 722 unsigned dies = qemu_opt_get_number(opts, "dies", 1); 723 unsigned cores = qemu_opt_get_number(opts, "cores", 0); 724 unsigned threads = qemu_opt_get_number(opts, "threads", 0); 725 726 /* compute missing values, prefer sockets over cores over threads */ 727 if (cpus == 0 || sockets == 0) { 728 cores = cores > 0 ? cores : 1; 729 threads = threads > 0 ? threads : 1; 730 if (cpus == 0) { 731 sockets = sockets > 0 ? sockets : 1; 732 cpus = cores * threads * dies * sockets; 733 } else { 734 ms->smp.max_cpus = 735 qemu_opt_get_number(opts, "maxcpus", cpus); 736 sockets = ms->smp.max_cpus / (cores * threads * dies); 737 } 738 } else if (cores == 0) { 739 threads = threads > 0 ? threads : 1; 740 cores = cpus / (sockets * dies * threads); 741 cores = cores > 0 ? cores : 1; 742 } else if (threads == 0) { 743 threads = cpus / (cores * dies * sockets); 744 threads = threads > 0 ? threads : 1; 745 } else if (sockets * dies * cores * threads < cpus) { 746 error_report("cpu topology: " 747 "sockets (%u) * dies (%u) * cores (%u) * threads (%u) < " 748 "smp_cpus (%u)", 749 sockets, dies, cores, threads, cpus); 750 exit(1); 751 } 752 753 ms->smp.max_cpus = 754 qemu_opt_get_number(opts, "maxcpus", cpus); 755 756 if (ms->smp.max_cpus < cpus) { 757 error_report("maxcpus must be equal to or greater than smp"); 758 exit(1); 759 } 760 761 if (sockets * dies * cores * threads > ms->smp.max_cpus) { 762 error_report("cpu topology: " 763 "sockets (%u) * dies (%u) * cores (%u) * threads (%u) > " 764 "maxcpus (%u)", 765 sockets, dies, cores, threads, 766 ms->smp.max_cpus); 767 exit(1); 768 } 769 770 if (sockets * dies * cores * threads != ms->smp.max_cpus) { 771 warn_report("Invalid CPU topology deprecated: " 772 "sockets (%u) * dies (%u) * cores (%u) * threads (%u) " 773 "!= maxcpus (%u)", 774 sockets, dies, cores, threads, 775 ms->smp.max_cpus); 776 } 777 778 ms->smp.cpus = cpus; 779 ms->smp.cores = cores; 780 ms->smp.threads = threads; 781 x86ms->smp_dies = dies; 782 } 783 784 if (ms->smp.cpus > 1) { 785 Error *blocker = NULL; 786 error_setg(&blocker, QERR_REPLAY_NOT_SUPPORTED, "smp"); 787 replay_add_blocker(blocker); 788 } 789 } 790 791 void pc_hot_add_cpu(MachineState *ms, const int64_t id, Error **errp) 792 { 793 X86MachineState *x86ms = X86_MACHINE(ms); 794 int64_t apic_id = x86_cpu_apic_id_from_index(x86ms, id); 795 Error *local_err = NULL; 796 797 if (id < 0) { 798 error_setg(errp, "Invalid CPU id: %" PRIi64, id); 799 return; 800 } 801 802 if (apic_id >= ACPI_CPU_HOTPLUG_ID_LIMIT) { 803 error_setg(errp, "Unable to add CPU: %" PRIi64 804 ", resulting APIC ID (%" PRIi64 ") is too large", 805 id, apic_id); 806 return; 807 } 808 809 810 x86_cpu_new(X86_MACHINE(ms), apic_id, &local_err); 811 if (local_err) { 812 error_propagate(errp, local_err); 813 return; 814 } 815 } 816 817 static void rtc_set_cpus_count(ISADevice *rtc, uint16_t cpus_count) 818 { 819 if (cpus_count > 0xff) { 820 /* If the number of CPUs can't be represented in 8 bits, the 821 * BIOS must use "FW_CFG_NB_CPUS". Set RTC field to 0 just 822 * to make old BIOSes fail more predictably. 823 */ 824 rtc_set_memory(rtc, 0x5f, 0); 825 } else { 826 rtc_set_memory(rtc, 0x5f, cpus_count - 1); 827 } 828 } 829 830 static 831 void pc_machine_done(Notifier *notifier, void *data) 832 { 833 PCMachineState *pcms = container_of(notifier, 834 PCMachineState, machine_done); 835 X86MachineState *x86ms = X86_MACHINE(pcms); 836 PCIBus *bus = pcms->bus; 837 838 /* set the number of CPUs */ 839 rtc_set_cpus_count(x86ms->rtc, x86ms->boot_cpus); 840 841 if (bus) { 842 int extra_hosts = 0; 843 844 QLIST_FOREACH(bus, &bus->child, sibling) { 845 /* look for expander root buses */ 846 if (pci_bus_is_root(bus)) { 847 extra_hosts++; 848 } 849 } 850 if (extra_hosts && x86ms->fw_cfg) { 851 uint64_t *val = g_malloc(sizeof(*val)); 852 *val = cpu_to_le64(extra_hosts); 853 fw_cfg_add_file(x86ms->fw_cfg, 854 "etc/extra-pci-roots", val, sizeof(*val)); 855 } 856 } 857 858 acpi_setup(); 859 if (x86ms->fw_cfg) { 860 fw_cfg_build_smbios(MACHINE(pcms), x86ms->fw_cfg); 861 fw_cfg_build_feature_control(MACHINE(pcms), x86ms->fw_cfg); 862 /* update FW_CFG_NB_CPUS to account for -device added CPUs */ 863 fw_cfg_modify_i16(x86ms->fw_cfg, FW_CFG_NB_CPUS, x86ms->boot_cpus); 864 } 865 866 if (x86ms->apic_id_limit > 255 && !xen_enabled()) { 867 IntelIOMMUState *iommu = INTEL_IOMMU_DEVICE(x86_iommu_get_default()); 868 869 if (!iommu || !x86_iommu_ir_supported(X86_IOMMU_DEVICE(iommu)) || 870 iommu->intr_eim != ON_OFF_AUTO_ON) { 871 error_report("current -smp configuration requires " 872 "Extended Interrupt Mode enabled. " 873 "You can add an IOMMU using: " 874 "-device intel-iommu,intremap=on,eim=on"); 875 exit(EXIT_FAILURE); 876 } 877 } 878 } 879 880 void pc_guest_info_init(PCMachineState *pcms) 881 { 882 int i; 883 MachineState *ms = MACHINE(pcms); 884 X86MachineState *x86ms = X86_MACHINE(pcms); 885 886 x86ms->apic_xrupt_override = kvm_allows_irq0_override(); 887 pcms->numa_nodes = ms->numa_state->num_nodes; 888 pcms->node_mem = g_malloc0(pcms->numa_nodes * 889 sizeof *pcms->node_mem); 890 for (i = 0; i < ms->numa_state->num_nodes; i++) { 891 pcms->node_mem[i] = ms->numa_state->nodes[i].node_mem; 892 } 893 894 pcms->machine_done.notify = pc_machine_done; 895 qemu_add_machine_init_done_notifier(&pcms->machine_done); 896 } 897 898 /* setup pci memory address space mapping into system address space */ 899 void pc_pci_as_mapping_init(Object *owner, MemoryRegion *system_memory, 900 MemoryRegion *pci_address_space) 901 { 902 /* Set to lower priority than RAM */ 903 memory_region_add_subregion_overlap(system_memory, 0x0, 904 pci_address_space, -1); 905 } 906 907 void xen_load_linux(PCMachineState *pcms) 908 { 909 int i; 910 FWCfgState *fw_cfg; 911 PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); 912 X86MachineState *x86ms = X86_MACHINE(pcms); 913 914 assert(MACHINE(pcms)->kernel_filename != NULL); 915 916 fw_cfg = fw_cfg_init_io(FW_CFG_IO_BASE); 917 fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, x86ms->boot_cpus); 918 rom_set_fw(fw_cfg); 919 920 x86_load_linux(x86ms, fw_cfg, pcmc->acpi_data_size, 921 pcmc->pvh_enabled, pcmc->linuxboot_dma_enabled); 922 for (i = 0; i < nb_option_roms; i++) { 923 assert(!strcmp(option_rom[i].name, "linuxboot.bin") || 924 !strcmp(option_rom[i].name, "linuxboot_dma.bin") || 925 !strcmp(option_rom[i].name, "pvh.bin") || 926 !strcmp(option_rom[i].name, "multiboot.bin")); 927 rom_add_option(option_rom[i].name, option_rom[i].bootindex); 928 } 929 x86ms->fw_cfg = fw_cfg; 930 } 931 932 void pc_memory_init(PCMachineState *pcms, 933 MemoryRegion *system_memory, 934 MemoryRegion *rom_memory, 935 MemoryRegion **ram_memory) 936 { 937 int linux_boot, i; 938 MemoryRegion *ram, *option_rom_mr; 939 MemoryRegion *ram_below_4g, *ram_above_4g; 940 FWCfgState *fw_cfg; 941 MachineState *machine = MACHINE(pcms); 942 MachineClass *mc = MACHINE_GET_CLASS(machine); 943 PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); 944 X86MachineState *x86ms = X86_MACHINE(pcms); 945 946 assert(machine->ram_size == x86ms->below_4g_mem_size + 947 x86ms->above_4g_mem_size); 948 949 linux_boot = (machine->kernel_filename != NULL); 950 951 /* Allocate RAM. We allocate it as a single memory region and use 952 * aliases to address portions of it, mostly for backwards compatibility 953 * with older qemus that used qemu_ram_alloc(). 954 */ 955 ram = g_malloc(sizeof(*ram)); 956 memory_region_allocate_system_memory(ram, NULL, "pc.ram", 957 machine->ram_size); 958 *ram_memory = ram; 959 ram_below_4g = g_malloc(sizeof(*ram_below_4g)); 960 memory_region_init_alias(ram_below_4g, NULL, "ram-below-4g", ram, 961 0, x86ms->below_4g_mem_size); 962 memory_region_add_subregion(system_memory, 0, ram_below_4g); 963 e820_add_entry(0, x86ms->below_4g_mem_size, E820_RAM); 964 if (x86ms->above_4g_mem_size > 0) { 965 ram_above_4g = g_malloc(sizeof(*ram_above_4g)); 966 memory_region_init_alias(ram_above_4g, NULL, "ram-above-4g", ram, 967 x86ms->below_4g_mem_size, 968 x86ms->above_4g_mem_size); 969 memory_region_add_subregion(system_memory, 0x100000000ULL, 970 ram_above_4g); 971 e820_add_entry(0x100000000ULL, x86ms->above_4g_mem_size, E820_RAM); 972 } 973 974 if (!pcmc->has_reserved_memory && 975 (machine->ram_slots || 976 (machine->maxram_size > machine->ram_size))) { 977 978 error_report("\"-memory 'slots|maxmem'\" is not supported by: %s", 979 mc->name); 980 exit(EXIT_FAILURE); 981 } 982 983 /* always allocate the device memory information */ 984 machine->device_memory = g_malloc0(sizeof(*machine->device_memory)); 985 986 /* initialize device memory address space */ 987 if (pcmc->has_reserved_memory && 988 (machine->ram_size < machine->maxram_size)) { 989 ram_addr_t device_mem_size = machine->maxram_size - machine->ram_size; 990 991 if (machine->ram_slots > ACPI_MAX_RAM_SLOTS) { 992 error_report("unsupported amount of memory slots: %"PRIu64, 993 machine->ram_slots); 994 exit(EXIT_FAILURE); 995 } 996 997 if (QEMU_ALIGN_UP(machine->maxram_size, 998 TARGET_PAGE_SIZE) != machine->maxram_size) { 999 error_report("maximum memory size must by aligned to multiple of " 1000 "%d bytes", TARGET_PAGE_SIZE); 1001 exit(EXIT_FAILURE); 1002 } 1003 1004 machine->device_memory->base = 1005 ROUND_UP(0x100000000ULL + x86ms->above_4g_mem_size, 1 * GiB); 1006 1007 if (pcmc->enforce_aligned_dimm) { 1008 /* size device region assuming 1G page max alignment per slot */ 1009 device_mem_size += (1 * GiB) * machine->ram_slots; 1010 } 1011 1012 if ((machine->device_memory->base + device_mem_size) < 1013 device_mem_size) { 1014 error_report("unsupported amount of maximum memory: " RAM_ADDR_FMT, 1015 machine->maxram_size); 1016 exit(EXIT_FAILURE); 1017 } 1018 1019 memory_region_init(&machine->device_memory->mr, OBJECT(pcms), 1020 "device-memory", device_mem_size); 1021 memory_region_add_subregion(system_memory, machine->device_memory->base, 1022 &machine->device_memory->mr); 1023 } 1024 1025 /* Initialize PC system firmware */ 1026 pc_system_firmware_init(pcms, rom_memory); 1027 1028 option_rom_mr = g_malloc(sizeof(*option_rom_mr)); 1029 memory_region_init_ram(option_rom_mr, NULL, "pc.rom", PC_ROM_SIZE, 1030 &error_fatal); 1031 if (pcmc->pci_enabled) { 1032 memory_region_set_readonly(option_rom_mr, true); 1033 } 1034 memory_region_add_subregion_overlap(rom_memory, 1035 PC_ROM_MIN_VGA, 1036 option_rom_mr, 1037 1); 1038 1039 fw_cfg = fw_cfg_arch_create(machine, 1040 x86ms->boot_cpus, x86ms->apic_id_limit); 1041 1042 rom_set_fw(fw_cfg); 1043 1044 if (pcmc->has_reserved_memory && machine->device_memory->base) { 1045 uint64_t *val = g_malloc(sizeof(*val)); 1046 PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); 1047 uint64_t res_mem_end = machine->device_memory->base; 1048 1049 if (!pcmc->broken_reserved_end) { 1050 res_mem_end += memory_region_size(&machine->device_memory->mr); 1051 } 1052 *val = cpu_to_le64(ROUND_UP(res_mem_end, 1 * GiB)); 1053 fw_cfg_add_file(fw_cfg, "etc/reserved-memory-end", val, sizeof(*val)); 1054 } 1055 1056 if (linux_boot) { 1057 x86_load_linux(x86ms, fw_cfg, pcmc->acpi_data_size, 1058 pcmc->pvh_enabled, pcmc->linuxboot_dma_enabled); 1059 } 1060 1061 for (i = 0; i < nb_option_roms; i++) { 1062 rom_add_option(option_rom[i].name, option_rom[i].bootindex); 1063 } 1064 x86ms->fw_cfg = fw_cfg; 1065 1066 /* Init default IOAPIC address space */ 1067 x86ms->ioapic_as = &address_space_memory; 1068 1069 /* Init ACPI memory hotplug IO base address */ 1070 pcms->memhp_io_base = ACPI_MEMORY_HOTPLUG_BASE; 1071 } 1072 1073 /* 1074 * The 64bit pci hole starts after "above 4G RAM" and 1075 * potentially the space reserved for memory hotplug. 1076 */ 1077 uint64_t pc_pci_hole64_start(void) 1078 { 1079 PCMachineState *pcms = PC_MACHINE(qdev_get_machine()); 1080 PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); 1081 MachineState *ms = MACHINE(pcms); 1082 X86MachineState *x86ms = X86_MACHINE(pcms); 1083 uint64_t hole64_start = 0; 1084 1085 if (pcmc->has_reserved_memory && ms->device_memory->base) { 1086 hole64_start = ms->device_memory->base; 1087 if (!pcmc->broken_reserved_end) { 1088 hole64_start += memory_region_size(&ms->device_memory->mr); 1089 } 1090 } else { 1091 hole64_start = 0x100000000ULL + x86ms->above_4g_mem_size; 1092 } 1093 1094 return ROUND_UP(hole64_start, 1 * GiB); 1095 } 1096 1097 DeviceState *pc_vga_init(ISABus *isa_bus, PCIBus *pci_bus) 1098 { 1099 DeviceState *dev = NULL; 1100 1101 rom_set_order_override(FW_CFG_ORDER_OVERRIDE_VGA); 1102 if (pci_bus) { 1103 PCIDevice *pcidev = pci_vga_init(pci_bus); 1104 dev = pcidev ? &pcidev->qdev : NULL; 1105 } else if (isa_bus) { 1106 ISADevice *isadev = isa_vga_init(isa_bus); 1107 dev = isadev ? DEVICE(isadev) : NULL; 1108 } 1109 rom_reset_order_override(); 1110 return dev; 1111 } 1112 1113 static const MemoryRegionOps ioport80_io_ops = { 1114 .write = ioport80_write, 1115 .read = ioport80_read, 1116 .endianness = DEVICE_NATIVE_ENDIAN, 1117 .impl = { 1118 .min_access_size = 1, 1119 .max_access_size = 1, 1120 }, 1121 }; 1122 1123 static const MemoryRegionOps ioportF0_io_ops = { 1124 .write = ioportF0_write, 1125 .read = ioportF0_read, 1126 .endianness = DEVICE_NATIVE_ENDIAN, 1127 .impl = { 1128 .min_access_size = 1, 1129 .max_access_size = 1, 1130 }, 1131 }; 1132 1133 static void pc_superio_init(ISABus *isa_bus, bool create_fdctrl, bool no_vmport) 1134 { 1135 int i; 1136 DriveInfo *fd[MAX_FD]; 1137 qemu_irq *a20_line; 1138 ISADevice *i8042, *port92, *vmmouse; 1139 1140 serial_hds_isa_init(isa_bus, 0, MAX_ISA_SERIAL_PORTS); 1141 parallel_hds_isa_init(isa_bus, MAX_PARALLEL_PORTS); 1142 1143 for (i = 0; i < MAX_FD; i++) { 1144 fd[i] = drive_get(IF_FLOPPY, 0, i); 1145 create_fdctrl |= !!fd[i]; 1146 } 1147 if (create_fdctrl) { 1148 fdctrl_init_isa(isa_bus, fd); 1149 } 1150 1151 i8042 = isa_create_simple(isa_bus, "i8042"); 1152 if (!no_vmport) { 1153 vmport_init(isa_bus); 1154 vmmouse = isa_try_create(isa_bus, "vmmouse"); 1155 } else { 1156 vmmouse = NULL; 1157 } 1158 if (vmmouse) { 1159 object_property_set_link(OBJECT(vmmouse), OBJECT(i8042), 1160 "i8042", &error_abort); 1161 qdev_init_nofail(DEVICE(vmmouse)); 1162 } 1163 port92 = isa_create_simple(isa_bus, TYPE_PORT92); 1164 1165 a20_line = qemu_allocate_irqs(handle_a20_line_change, first_cpu, 2); 1166 i8042_setup_a20_line(i8042, a20_line[0]); 1167 qdev_connect_gpio_out_named(DEVICE(port92), 1168 PORT92_A20_LINE, 0, a20_line[1]); 1169 g_free(a20_line); 1170 } 1171 1172 void pc_basic_device_init(ISABus *isa_bus, qemu_irq *gsi, 1173 ISADevice **rtc_state, 1174 bool create_fdctrl, 1175 bool no_vmport, 1176 bool has_pit, 1177 uint32_t hpet_irqs) 1178 { 1179 int i; 1180 DeviceState *hpet = NULL; 1181 int pit_isa_irq = 0; 1182 qemu_irq pit_alt_irq = NULL; 1183 qemu_irq rtc_irq = NULL; 1184 ISADevice *pit = NULL; 1185 MemoryRegion *ioport80_io = g_new(MemoryRegion, 1); 1186 MemoryRegion *ioportF0_io = g_new(MemoryRegion, 1); 1187 1188 memory_region_init_io(ioport80_io, NULL, &ioport80_io_ops, NULL, "ioport80", 1); 1189 memory_region_add_subregion(isa_bus->address_space_io, 0x80, ioport80_io); 1190 1191 memory_region_init_io(ioportF0_io, NULL, &ioportF0_io_ops, NULL, "ioportF0", 1); 1192 memory_region_add_subregion(isa_bus->address_space_io, 0xf0, ioportF0_io); 1193 1194 /* 1195 * Check if an HPET shall be created. 1196 * 1197 * Without KVM_CAP_PIT_STATE2, we cannot switch off the in-kernel PIT 1198 * when the HPET wants to take over. Thus we have to disable the latter. 1199 */ 1200 if (!no_hpet && (!kvm_irqchip_in_kernel() || kvm_has_pit_state2())) { 1201 hpet = qdev_try_create(NULL, TYPE_HPET); 1202 if (hpet) { 1203 /* For pc-piix-*, hpet's intcap is always IRQ2. For pc-q35-1.7 1204 * and earlier, use IRQ2 for compat. Otherwise, use IRQ16~23, 1205 * IRQ8 and IRQ2. 1206 */ 1207 uint8_t compat = object_property_get_uint(OBJECT(hpet), 1208 HPET_INTCAP, NULL); 1209 if (!compat) { 1210 qdev_prop_set_uint32(hpet, HPET_INTCAP, hpet_irqs); 1211 } 1212 qdev_init_nofail(hpet); 1213 sysbus_mmio_map(SYS_BUS_DEVICE(hpet), 0, HPET_BASE); 1214 1215 for (i = 0; i < GSI_NUM_PINS; i++) { 1216 sysbus_connect_irq(SYS_BUS_DEVICE(hpet), i, gsi[i]); 1217 } 1218 pit_isa_irq = -1; 1219 pit_alt_irq = qdev_get_gpio_in(hpet, HPET_LEGACY_PIT_INT); 1220 rtc_irq = qdev_get_gpio_in(hpet, HPET_LEGACY_RTC_INT); 1221 } 1222 } 1223 *rtc_state = mc146818_rtc_init(isa_bus, 2000, rtc_irq); 1224 1225 qemu_register_boot_set(pc_boot_set, *rtc_state); 1226 1227 if (!xen_enabled() && has_pit) { 1228 if (kvm_pit_in_kernel()) { 1229 pit = kvm_pit_init(isa_bus, 0x40); 1230 } else { 1231 pit = i8254_pit_init(isa_bus, 0x40, pit_isa_irq, pit_alt_irq); 1232 } 1233 if (hpet) { 1234 /* connect PIT to output control line of the HPET */ 1235 qdev_connect_gpio_out(hpet, 0, qdev_get_gpio_in(DEVICE(pit), 0)); 1236 } 1237 pcspk_init(isa_bus, pit); 1238 } 1239 1240 i8257_dma_init(isa_bus, 0); 1241 1242 /* Super I/O */ 1243 pc_superio_init(isa_bus, create_fdctrl, no_vmport); 1244 } 1245 1246 void pc_nic_init(PCMachineClass *pcmc, ISABus *isa_bus, PCIBus *pci_bus) 1247 { 1248 int i; 1249 1250 rom_set_order_override(FW_CFG_ORDER_OVERRIDE_NIC); 1251 for (i = 0; i < nb_nics; i++) { 1252 NICInfo *nd = &nd_table[i]; 1253 const char *model = nd->model ? nd->model : pcmc->default_nic_model; 1254 1255 if (g_str_equal(model, "ne2k_isa")) { 1256 pc_init_ne2k_isa(isa_bus, nd); 1257 } else { 1258 pci_nic_init_nofail(nd, pci_bus, model, NULL); 1259 } 1260 } 1261 rom_reset_order_override(); 1262 } 1263 1264 void pc_i8259_create(ISABus *isa_bus, qemu_irq *i8259_irqs) 1265 { 1266 qemu_irq *i8259; 1267 1268 if (kvm_pic_in_kernel()) { 1269 i8259 = kvm_i8259_init(isa_bus); 1270 } else if (xen_enabled()) { 1271 i8259 = xen_interrupt_controller_init(); 1272 } else { 1273 i8259 = i8259_init(isa_bus, x86_allocate_cpu_irq()); 1274 } 1275 1276 for (size_t i = 0; i < ISA_NUM_IRQS; i++) { 1277 i8259_irqs[i] = i8259[i]; 1278 } 1279 1280 g_free(i8259); 1281 } 1282 1283 static void pc_memory_pre_plug(HotplugHandler *hotplug_dev, DeviceState *dev, 1284 Error **errp) 1285 { 1286 const PCMachineState *pcms = PC_MACHINE(hotplug_dev); 1287 const PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); 1288 const MachineState *ms = MACHINE(hotplug_dev); 1289 const bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM); 1290 const uint64_t legacy_align = TARGET_PAGE_SIZE; 1291 Error *local_err = NULL; 1292 1293 /* 1294 * When -no-acpi is used with Q35 machine type, no ACPI is built, 1295 * but pcms->acpi_dev is still created. Check !acpi_enabled in 1296 * addition to cover this case. 1297 */ 1298 if (!pcms->acpi_dev || !acpi_enabled) { 1299 error_setg(errp, 1300 "memory hotplug is not enabled: missing acpi device or acpi disabled"); 1301 return; 1302 } 1303 1304 if (is_nvdimm && !ms->nvdimms_state->is_enabled) { 1305 error_setg(errp, "nvdimm is not enabled: missing 'nvdimm' in '-M'"); 1306 return; 1307 } 1308 1309 hotplug_handler_pre_plug(pcms->acpi_dev, dev, &local_err); 1310 if (local_err) { 1311 error_propagate(errp, local_err); 1312 return; 1313 } 1314 1315 pc_dimm_pre_plug(PC_DIMM(dev), MACHINE(hotplug_dev), 1316 pcmc->enforce_aligned_dimm ? NULL : &legacy_align, errp); 1317 } 1318 1319 static void pc_memory_plug(HotplugHandler *hotplug_dev, 1320 DeviceState *dev, Error **errp) 1321 { 1322 Error *local_err = NULL; 1323 PCMachineState *pcms = PC_MACHINE(hotplug_dev); 1324 MachineState *ms = MACHINE(hotplug_dev); 1325 bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM); 1326 1327 pc_dimm_plug(PC_DIMM(dev), MACHINE(pcms), &local_err); 1328 if (local_err) { 1329 goto out; 1330 } 1331 1332 if (is_nvdimm) { 1333 nvdimm_plug(ms->nvdimms_state); 1334 } 1335 1336 hotplug_handler_plug(HOTPLUG_HANDLER(pcms->acpi_dev), dev, &error_abort); 1337 out: 1338 error_propagate(errp, local_err); 1339 } 1340 1341 static void pc_memory_unplug_request(HotplugHandler *hotplug_dev, 1342 DeviceState *dev, Error **errp) 1343 { 1344 Error *local_err = NULL; 1345 PCMachineState *pcms = PC_MACHINE(hotplug_dev); 1346 1347 /* 1348 * When -no-acpi is used with Q35 machine type, no ACPI is built, 1349 * but pcms->acpi_dev is still created. Check !acpi_enabled in 1350 * addition to cover this case. 1351 */ 1352 if (!pcms->acpi_dev || !acpi_enabled) { 1353 error_setg(&local_err, 1354 "memory hotplug is not enabled: missing acpi device or acpi disabled"); 1355 goto out; 1356 } 1357 1358 if (object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM)) { 1359 error_setg(&local_err, 1360 "nvdimm device hot unplug is not supported yet."); 1361 goto out; 1362 } 1363 1364 hotplug_handler_unplug_request(HOTPLUG_HANDLER(pcms->acpi_dev), dev, 1365 &local_err); 1366 out: 1367 error_propagate(errp, local_err); 1368 } 1369 1370 static void pc_memory_unplug(HotplugHandler *hotplug_dev, 1371 DeviceState *dev, Error **errp) 1372 { 1373 PCMachineState *pcms = PC_MACHINE(hotplug_dev); 1374 Error *local_err = NULL; 1375 1376 hotplug_handler_unplug(HOTPLUG_HANDLER(pcms->acpi_dev), dev, &local_err); 1377 if (local_err) { 1378 goto out; 1379 } 1380 1381 pc_dimm_unplug(PC_DIMM(dev), MACHINE(pcms)); 1382 object_property_set_bool(OBJECT(dev), false, "realized", NULL); 1383 out: 1384 error_propagate(errp, local_err); 1385 } 1386 1387 static int pc_apic_cmp(const void *a, const void *b) 1388 { 1389 CPUArchId *apic_a = (CPUArchId *)a; 1390 CPUArchId *apic_b = (CPUArchId *)b; 1391 1392 return apic_a->arch_id - apic_b->arch_id; 1393 } 1394 1395 /* returns pointer to CPUArchId descriptor that matches CPU's apic_id 1396 * in ms->possible_cpus->cpus, if ms->possible_cpus->cpus has no 1397 * entry corresponding to CPU's apic_id returns NULL. 1398 */ 1399 static CPUArchId *pc_find_cpu_slot(MachineState *ms, uint32_t id, int *idx) 1400 { 1401 CPUArchId apic_id, *found_cpu; 1402 1403 apic_id.arch_id = id; 1404 found_cpu = bsearch(&apic_id, ms->possible_cpus->cpus, 1405 ms->possible_cpus->len, sizeof(*ms->possible_cpus->cpus), 1406 pc_apic_cmp); 1407 if (found_cpu && idx) { 1408 *idx = found_cpu - ms->possible_cpus->cpus; 1409 } 1410 return found_cpu; 1411 } 1412 1413 static void pc_cpu_plug(HotplugHandler *hotplug_dev, 1414 DeviceState *dev, Error **errp) 1415 { 1416 CPUArchId *found_cpu; 1417 Error *local_err = NULL; 1418 X86CPU *cpu = X86_CPU(dev); 1419 PCMachineState *pcms = PC_MACHINE(hotplug_dev); 1420 X86MachineState *x86ms = X86_MACHINE(pcms); 1421 1422 if (pcms->acpi_dev) { 1423 hotplug_handler_plug(HOTPLUG_HANDLER(pcms->acpi_dev), dev, &local_err); 1424 if (local_err) { 1425 goto out; 1426 } 1427 } 1428 1429 /* increment the number of CPUs */ 1430 x86ms->boot_cpus++; 1431 if (x86ms->rtc) { 1432 rtc_set_cpus_count(x86ms->rtc, x86ms->boot_cpus); 1433 } 1434 if (x86ms->fw_cfg) { 1435 fw_cfg_modify_i16(x86ms->fw_cfg, FW_CFG_NB_CPUS, x86ms->boot_cpus); 1436 } 1437 1438 found_cpu = pc_find_cpu_slot(MACHINE(pcms), cpu->apic_id, NULL); 1439 found_cpu->cpu = OBJECT(dev); 1440 out: 1441 error_propagate(errp, local_err); 1442 } 1443 static void pc_cpu_unplug_request_cb(HotplugHandler *hotplug_dev, 1444 DeviceState *dev, Error **errp) 1445 { 1446 int idx = -1; 1447 Error *local_err = NULL; 1448 X86CPU *cpu = X86_CPU(dev); 1449 PCMachineState *pcms = PC_MACHINE(hotplug_dev); 1450 1451 if (!pcms->acpi_dev) { 1452 error_setg(&local_err, "CPU hot unplug not supported without ACPI"); 1453 goto out; 1454 } 1455 1456 pc_find_cpu_slot(MACHINE(pcms), cpu->apic_id, &idx); 1457 assert(idx != -1); 1458 if (idx == 0) { 1459 error_setg(&local_err, "Boot CPU is unpluggable"); 1460 goto out; 1461 } 1462 1463 hotplug_handler_unplug_request(HOTPLUG_HANDLER(pcms->acpi_dev), dev, 1464 &local_err); 1465 if (local_err) { 1466 goto out; 1467 } 1468 1469 out: 1470 error_propagate(errp, local_err); 1471 1472 } 1473 1474 static void pc_cpu_unplug_cb(HotplugHandler *hotplug_dev, 1475 DeviceState *dev, Error **errp) 1476 { 1477 CPUArchId *found_cpu; 1478 Error *local_err = NULL; 1479 X86CPU *cpu = X86_CPU(dev); 1480 PCMachineState *pcms = PC_MACHINE(hotplug_dev); 1481 X86MachineState *x86ms = X86_MACHINE(pcms); 1482 1483 hotplug_handler_unplug(HOTPLUG_HANDLER(pcms->acpi_dev), dev, &local_err); 1484 if (local_err) { 1485 goto out; 1486 } 1487 1488 found_cpu = pc_find_cpu_slot(MACHINE(pcms), cpu->apic_id, NULL); 1489 found_cpu->cpu = NULL; 1490 object_property_set_bool(OBJECT(dev), false, "realized", NULL); 1491 1492 /* decrement the number of CPUs */ 1493 x86ms->boot_cpus--; 1494 /* Update the number of CPUs in CMOS */ 1495 rtc_set_cpus_count(x86ms->rtc, x86ms->boot_cpus); 1496 fw_cfg_modify_i16(x86ms->fw_cfg, FW_CFG_NB_CPUS, x86ms->boot_cpus); 1497 out: 1498 error_propagate(errp, local_err); 1499 } 1500 1501 static void pc_cpu_pre_plug(HotplugHandler *hotplug_dev, 1502 DeviceState *dev, Error **errp) 1503 { 1504 int idx; 1505 CPUState *cs; 1506 CPUArchId *cpu_slot; 1507 X86CPUTopoInfo topo; 1508 X86CPU *cpu = X86_CPU(dev); 1509 CPUX86State *env = &cpu->env; 1510 MachineState *ms = MACHINE(hotplug_dev); 1511 PCMachineState *pcms = PC_MACHINE(hotplug_dev); 1512 X86MachineState *x86ms = X86_MACHINE(pcms); 1513 unsigned int smp_cores = ms->smp.cores; 1514 unsigned int smp_threads = ms->smp.threads; 1515 1516 if(!object_dynamic_cast(OBJECT(cpu), ms->cpu_type)) { 1517 error_setg(errp, "Invalid CPU type, expected cpu type: '%s'", 1518 ms->cpu_type); 1519 return; 1520 } 1521 1522 env->nr_dies = x86ms->smp_dies; 1523 1524 /* 1525 * If APIC ID is not set, 1526 * set it based on socket/die/core/thread properties. 1527 */ 1528 if (cpu->apic_id == UNASSIGNED_APIC_ID) { 1529 int max_socket = (ms->smp.max_cpus - 1) / 1530 smp_threads / smp_cores / x86ms->smp_dies; 1531 1532 /* 1533 * die-id was optional in QEMU 4.0 and older, so keep it optional 1534 * if there's only one die per socket. 1535 */ 1536 if (cpu->die_id < 0 && x86ms->smp_dies == 1) { 1537 cpu->die_id = 0; 1538 } 1539 1540 if (cpu->socket_id < 0) { 1541 error_setg(errp, "CPU socket-id is not set"); 1542 return; 1543 } else if (cpu->socket_id > max_socket) { 1544 error_setg(errp, "Invalid CPU socket-id: %u must be in range 0:%u", 1545 cpu->socket_id, max_socket); 1546 return; 1547 } 1548 if (cpu->die_id < 0) { 1549 error_setg(errp, "CPU die-id is not set"); 1550 return; 1551 } else if (cpu->die_id > x86ms->smp_dies - 1) { 1552 error_setg(errp, "Invalid CPU die-id: %u must be in range 0:%u", 1553 cpu->die_id, x86ms->smp_dies - 1); 1554 return; 1555 } 1556 if (cpu->core_id < 0) { 1557 error_setg(errp, "CPU core-id is not set"); 1558 return; 1559 } else if (cpu->core_id > (smp_cores - 1)) { 1560 error_setg(errp, "Invalid CPU core-id: %u must be in range 0:%u", 1561 cpu->core_id, smp_cores - 1); 1562 return; 1563 } 1564 if (cpu->thread_id < 0) { 1565 error_setg(errp, "CPU thread-id is not set"); 1566 return; 1567 } else if (cpu->thread_id > (smp_threads - 1)) { 1568 error_setg(errp, "Invalid CPU thread-id: %u must be in range 0:%u", 1569 cpu->thread_id, smp_threads - 1); 1570 return; 1571 } 1572 1573 topo.pkg_id = cpu->socket_id; 1574 topo.die_id = cpu->die_id; 1575 topo.core_id = cpu->core_id; 1576 topo.smt_id = cpu->thread_id; 1577 cpu->apic_id = apicid_from_topo_ids(x86ms->smp_dies, smp_cores, 1578 smp_threads, &topo); 1579 } 1580 1581 cpu_slot = pc_find_cpu_slot(MACHINE(pcms), cpu->apic_id, &idx); 1582 if (!cpu_slot) { 1583 MachineState *ms = MACHINE(pcms); 1584 1585 x86_topo_ids_from_apicid(cpu->apic_id, x86ms->smp_dies, 1586 smp_cores, smp_threads, &topo); 1587 error_setg(errp, 1588 "Invalid CPU [socket: %u, die: %u, core: %u, thread: %u] with" 1589 " APIC ID %" PRIu32 ", valid index range 0:%d", 1590 topo.pkg_id, topo.die_id, topo.core_id, topo.smt_id, 1591 cpu->apic_id, ms->possible_cpus->len - 1); 1592 return; 1593 } 1594 1595 if (cpu_slot->cpu) { 1596 error_setg(errp, "CPU[%d] with APIC ID %" PRIu32 " exists", 1597 idx, cpu->apic_id); 1598 return; 1599 } 1600 1601 /* if 'address' properties socket-id/core-id/thread-id are not set, set them 1602 * so that machine_query_hotpluggable_cpus would show correct values 1603 */ 1604 /* TODO: move socket_id/core_id/thread_id checks into x86_cpu_realizefn() 1605 * once -smp refactoring is complete and there will be CPU private 1606 * CPUState::nr_cores and CPUState::nr_threads fields instead of globals */ 1607 x86_topo_ids_from_apicid(cpu->apic_id, x86ms->smp_dies, 1608 smp_cores, smp_threads, &topo); 1609 if (cpu->socket_id != -1 && cpu->socket_id != topo.pkg_id) { 1610 error_setg(errp, "property socket-id: %u doesn't match set apic-id:" 1611 " 0x%x (socket-id: %u)", cpu->socket_id, cpu->apic_id, topo.pkg_id); 1612 return; 1613 } 1614 cpu->socket_id = topo.pkg_id; 1615 1616 if (cpu->die_id != -1 && cpu->die_id != topo.die_id) { 1617 error_setg(errp, "property die-id: %u doesn't match set apic-id:" 1618 " 0x%x (die-id: %u)", cpu->die_id, cpu->apic_id, topo.die_id); 1619 return; 1620 } 1621 cpu->die_id = topo.die_id; 1622 1623 if (cpu->core_id != -1 && cpu->core_id != topo.core_id) { 1624 error_setg(errp, "property core-id: %u doesn't match set apic-id:" 1625 " 0x%x (core-id: %u)", cpu->core_id, cpu->apic_id, topo.core_id); 1626 return; 1627 } 1628 cpu->core_id = topo.core_id; 1629 1630 if (cpu->thread_id != -1 && cpu->thread_id != topo.smt_id) { 1631 error_setg(errp, "property thread-id: %u doesn't match set apic-id:" 1632 " 0x%x (thread-id: %u)", cpu->thread_id, cpu->apic_id, topo.smt_id); 1633 return; 1634 } 1635 cpu->thread_id = topo.smt_id; 1636 1637 if (hyperv_feat_enabled(cpu, HYPERV_FEAT_VPINDEX) && 1638 !kvm_hv_vpindex_settable()) { 1639 error_setg(errp, "kernel doesn't allow setting HyperV VP_INDEX"); 1640 return; 1641 } 1642 1643 cs = CPU(cpu); 1644 cs->cpu_index = idx; 1645 1646 numa_cpu_pre_plug(cpu_slot, dev, errp); 1647 } 1648 1649 static void pc_virtio_pmem_pci_pre_plug(HotplugHandler *hotplug_dev, 1650 DeviceState *dev, Error **errp) 1651 { 1652 HotplugHandler *hotplug_dev2 = qdev_get_bus_hotplug_handler(dev); 1653 Error *local_err = NULL; 1654 1655 if (!hotplug_dev2) { 1656 /* 1657 * Without a bus hotplug handler, we cannot control the plug/unplug 1658 * order. This should never be the case on x86, however better add 1659 * a safety net. 1660 */ 1661 error_setg(errp, "virtio-pmem-pci not supported on this bus."); 1662 return; 1663 } 1664 /* 1665 * First, see if we can plug this memory device at all. If that 1666 * succeeds, branch of to the actual hotplug handler. 1667 */ 1668 memory_device_pre_plug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev), NULL, 1669 &local_err); 1670 if (!local_err) { 1671 hotplug_handler_pre_plug(hotplug_dev2, dev, &local_err); 1672 } 1673 error_propagate(errp, local_err); 1674 } 1675 1676 static void pc_virtio_pmem_pci_plug(HotplugHandler *hotplug_dev, 1677 DeviceState *dev, Error **errp) 1678 { 1679 HotplugHandler *hotplug_dev2 = qdev_get_bus_hotplug_handler(dev); 1680 Error *local_err = NULL; 1681 1682 /* 1683 * Plug the memory device first and then branch off to the actual 1684 * hotplug handler. If that one fails, we can easily undo the memory 1685 * device bits. 1686 */ 1687 memory_device_plug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev)); 1688 hotplug_handler_plug(hotplug_dev2, dev, &local_err); 1689 if (local_err) { 1690 memory_device_unplug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev)); 1691 } 1692 error_propagate(errp, local_err); 1693 } 1694 1695 static void pc_virtio_pmem_pci_unplug_request(HotplugHandler *hotplug_dev, 1696 DeviceState *dev, Error **errp) 1697 { 1698 /* We don't support virtio pmem hot unplug */ 1699 error_setg(errp, "virtio pmem device unplug not supported."); 1700 } 1701 1702 static void pc_virtio_pmem_pci_unplug(HotplugHandler *hotplug_dev, 1703 DeviceState *dev, Error **errp) 1704 { 1705 /* We don't support virtio pmem hot unplug */ 1706 } 1707 1708 static void pc_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev, 1709 DeviceState *dev, Error **errp) 1710 { 1711 if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { 1712 pc_memory_pre_plug(hotplug_dev, dev, errp); 1713 } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { 1714 pc_cpu_pre_plug(hotplug_dev, dev, errp); 1715 } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI)) { 1716 pc_virtio_pmem_pci_pre_plug(hotplug_dev, dev, errp); 1717 } 1718 } 1719 1720 static void pc_machine_device_plug_cb(HotplugHandler *hotplug_dev, 1721 DeviceState *dev, Error **errp) 1722 { 1723 if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { 1724 pc_memory_plug(hotplug_dev, dev, errp); 1725 } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { 1726 pc_cpu_plug(hotplug_dev, dev, errp); 1727 } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI)) { 1728 pc_virtio_pmem_pci_plug(hotplug_dev, dev, errp); 1729 } 1730 } 1731 1732 static void pc_machine_device_unplug_request_cb(HotplugHandler *hotplug_dev, 1733 DeviceState *dev, Error **errp) 1734 { 1735 if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { 1736 pc_memory_unplug_request(hotplug_dev, dev, errp); 1737 } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { 1738 pc_cpu_unplug_request_cb(hotplug_dev, dev, errp); 1739 } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI)) { 1740 pc_virtio_pmem_pci_unplug_request(hotplug_dev, dev, errp); 1741 } else { 1742 error_setg(errp, "acpi: device unplug request for not supported device" 1743 " type: %s", object_get_typename(OBJECT(dev))); 1744 } 1745 } 1746 1747 static void pc_machine_device_unplug_cb(HotplugHandler *hotplug_dev, 1748 DeviceState *dev, Error **errp) 1749 { 1750 if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { 1751 pc_memory_unplug(hotplug_dev, dev, errp); 1752 } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { 1753 pc_cpu_unplug_cb(hotplug_dev, dev, errp); 1754 } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI)) { 1755 pc_virtio_pmem_pci_unplug(hotplug_dev, dev, errp); 1756 } else { 1757 error_setg(errp, "acpi: device unplug for not supported device" 1758 " type: %s", object_get_typename(OBJECT(dev))); 1759 } 1760 } 1761 1762 static HotplugHandler *pc_get_hotplug_handler(MachineState *machine, 1763 DeviceState *dev) 1764 { 1765 if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM) || 1766 object_dynamic_cast(OBJECT(dev), TYPE_CPU) || 1767 object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI)) { 1768 return HOTPLUG_HANDLER(machine); 1769 } 1770 1771 return NULL; 1772 } 1773 1774 static void 1775 pc_machine_get_device_memory_region_size(Object *obj, Visitor *v, 1776 const char *name, void *opaque, 1777 Error **errp) 1778 { 1779 MachineState *ms = MACHINE(obj); 1780 int64_t value = 0; 1781 1782 if (ms->device_memory) { 1783 value = memory_region_size(&ms->device_memory->mr); 1784 } 1785 1786 visit_type_int(v, name, &value, errp); 1787 } 1788 1789 static void pc_machine_get_vmport(Object *obj, Visitor *v, const char *name, 1790 void *opaque, Error **errp) 1791 { 1792 PCMachineState *pcms = PC_MACHINE(obj); 1793 OnOffAuto vmport = pcms->vmport; 1794 1795 visit_type_OnOffAuto(v, name, &vmport, errp); 1796 } 1797 1798 static void pc_machine_set_vmport(Object *obj, Visitor *v, const char *name, 1799 void *opaque, Error **errp) 1800 { 1801 PCMachineState *pcms = PC_MACHINE(obj); 1802 1803 visit_type_OnOffAuto(v, name, &pcms->vmport, errp); 1804 } 1805 1806 static bool pc_machine_get_smbus(Object *obj, Error **errp) 1807 { 1808 PCMachineState *pcms = PC_MACHINE(obj); 1809 1810 return pcms->smbus_enabled; 1811 } 1812 1813 static void pc_machine_set_smbus(Object *obj, bool value, Error **errp) 1814 { 1815 PCMachineState *pcms = PC_MACHINE(obj); 1816 1817 pcms->smbus_enabled = value; 1818 } 1819 1820 static bool pc_machine_get_sata(Object *obj, Error **errp) 1821 { 1822 PCMachineState *pcms = PC_MACHINE(obj); 1823 1824 return pcms->sata_enabled; 1825 } 1826 1827 static void pc_machine_set_sata(Object *obj, bool value, Error **errp) 1828 { 1829 PCMachineState *pcms = PC_MACHINE(obj); 1830 1831 pcms->sata_enabled = value; 1832 } 1833 1834 static bool pc_machine_get_pit(Object *obj, Error **errp) 1835 { 1836 PCMachineState *pcms = PC_MACHINE(obj); 1837 1838 return pcms->pit_enabled; 1839 } 1840 1841 static void pc_machine_set_pit(Object *obj, bool value, Error **errp) 1842 { 1843 PCMachineState *pcms = PC_MACHINE(obj); 1844 1845 pcms->pit_enabled = value; 1846 } 1847 1848 static void pc_machine_initfn(Object *obj) 1849 { 1850 PCMachineState *pcms = PC_MACHINE(obj); 1851 1852 #ifdef CONFIG_VMPORT 1853 pcms->vmport = ON_OFF_AUTO_AUTO; 1854 #else 1855 pcms->vmport = ON_OFF_AUTO_OFF; 1856 #endif /* CONFIG_VMPORT */ 1857 /* acpi build is enabled by default if machine supports it */ 1858 pcms->acpi_build_enabled = PC_MACHINE_GET_CLASS(pcms)->has_acpi_build; 1859 pcms->smbus_enabled = true; 1860 pcms->sata_enabled = true; 1861 pcms->pit_enabled = true; 1862 1863 pc_system_flash_create(pcms); 1864 } 1865 1866 static void pc_machine_reset(MachineState *machine) 1867 { 1868 CPUState *cs; 1869 X86CPU *cpu; 1870 1871 qemu_devices_reset(); 1872 1873 /* Reset APIC after devices have been reset to cancel 1874 * any changes that qemu_devices_reset() might have done. 1875 */ 1876 CPU_FOREACH(cs) { 1877 cpu = X86_CPU(cs); 1878 1879 if (cpu->apic_state) { 1880 device_reset(cpu->apic_state); 1881 } 1882 } 1883 } 1884 1885 static void pc_machine_wakeup(MachineState *machine) 1886 { 1887 cpu_synchronize_all_states(); 1888 pc_machine_reset(machine); 1889 cpu_synchronize_all_post_reset(); 1890 } 1891 1892 static bool pc_hotplug_allowed(MachineState *ms, DeviceState *dev, Error **errp) 1893 { 1894 X86IOMMUState *iommu = x86_iommu_get_default(); 1895 IntelIOMMUState *intel_iommu; 1896 1897 if (iommu && 1898 object_dynamic_cast((Object *)iommu, TYPE_INTEL_IOMMU_DEVICE) && 1899 object_dynamic_cast((Object *)dev, "vfio-pci")) { 1900 intel_iommu = INTEL_IOMMU_DEVICE(iommu); 1901 if (!intel_iommu->caching_mode) { 1902 error_setg(errp, "Device assignment is not allowed without " 1903 "enabling caching-mode=on for Intel IOMMU."); 1904 return false; 1905 } 1906 } 1907 1908 return true; 1909 } 1910 1911 static void pc_machine_class_init(ObjectClass *oc, void *data) 1912 { 1913 MachineClass *mc = MACHINE_CLASS(oc); 1914 PCMachineClass *pcmc = PC_MACHINE_CLASS(oc); 1915 HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(oc); 1916 1917 pcmc->pci_enabled = true; 1918 pcmc->has_acpi_build = true; 1919 pcmc->rsdp_in_ram = true; 1920 pcmc->smbios_defaults = true; 1921 pcmc->smbios_uuid_encoded = true; 1922 pcmc->gigabyte_align = true; 1923 pcmc->has_reserved_memory = true; 1924 pcmc->kvmclock_enabled = true; 1925 pcmc->enforce_aligned_dimm = true; 1926 /* BIOS ACPI tables: 128K. Other BIOS datastructures: less than 4K reported 1927 * to be used at the moment, 32K should be enough for a while. */ 1928 pcmc->acpi_data_size = 0x20000 + 0x8000; 1929 pcmc->linuxboot_dma_enabled = true; 1930 pcmc->pvh_enabled = true; 1931 assert(!mc->get_hotplug_handler); 1932 mc->get_hotplug_handler = pc_get_hotplug_handler; 1933 mc->hotplug_allowed = pc_hotplug_allowed; 1934 mc->cpu_index_to_instance_props = x86_cpu_index_to_props; 1935 mc->get_default_cpu_node_id = x86_get_default_cpu_node_id; 1936 mc->possible_cpu_arch_ids = x86_possible_cpu_arch_ids; 1937 mc->auto_enable_numa_with_memhp = true; 1938 mc->has_hotpluggable_cpus = true; 1939 mc->default_boot_order = "cad"; 1940 mc->hot_add_cpu = pc_hot_add_cpu; 1941 mc->smp_parse = pc_smp_parse; 1942 mc->block_default_type = IF_IDE; 1943 mc->max_cpus = 255; 1944 mc->reset = pc_machine_reset; 1945 mc->wakeup = pc_machine_wakeup; 1946 hc->pre_plug = pc_machine_device_pre_plug_cb; 1947 hc->plug = pc_machine_device_plug_cb; 1948 hc->unplug_request = pc_machine_device_unplug_request_cb; 1949 hc->unplug = pc_machine_device_unplug_cb; 1950 mc->default_cpu_type = TARGET_DEFAULT_CPU_TYPE; 1951 mc->nvdimm_supported = true; 1952 mc->numa_mem_supported = true; 1953 1954 object_class_property_add(oc, PC_MACHINE_DEVMEM_REGION_SIZE, "int", 1955 pc_machine_get_device_memory_region_size, NULL, 1956 NULL, NULL, &error_abort); 1957 1958 object_class_property_add(oc, PC_MACHINE_VMPORT, "OnOffAuto", 1959 pc_machine_get_vmport, pc_machine_set_vmport, 1960 NULL, NULL, &error_abort); 1961 object_class_property_set_description(oc, PC_MACHINE_VMPORT, 1962 "Enable vmport (pc & q35)", &error_abort); 1963 1964 object_class_property_add_bool(oc, PC_MACHINE_SMBUS, 1965 pc_machine_get_smbus, pc_machine_set_smbus, &error_abort); 1966 1967 object_class_property_add_bool(oc, PC_MACHINE_SATA, 1968 pc_machine_get_sata, pc_machine_set_sata, &error_abort); 1969 1970 object_class_property_add_bool(oc, PC_MACHINE_PIT, 1971 pc_machine_get_pit, pc_machine_set_pit, &error_abort); 1972 } 1973 1974 static const TypeInfo pc_machine_info = { 1975 .name = TYPE_PC_MACHINE, 1976 .parent = TYPE_X86_MACHINE, 1977 .abstract = true, 1978 .instance_size = sizeof(PCMachineState), 1979 .instance_init = pc_machine_initfn, 1980 .class_size = sizeof(PCMachineClass), 1981 .class_init = pc_machine_class_init, 1982 .interfaces = (InterfaceInfo[]) { 1983 { TYPE_HOTPLUG_HANDLER }, 1984 { } 1985 }, 1986 }; 1987 1988 static void pc_machine_register_types(void) 1989 { 1990 type_register_static(&pc_machine_info); 1991 } 1992 1993 type_init(pc_machine_register_types) 1994