1 /* 2 * QEMU SMBus device emulation. 3 * 4 * This code is a helper for SMBus device emulation. It implements an 5 * I2C device interface and runs the SMBus protocol from the device 6 * point of view and maps those to simple calls to emulate. 7 * 8 * Copyright (c) 2007 CodeSourcery. 9 * Written by Paul Brook 10 * 11 * This code is licensed under the LGPL. 12 */ 13 14 /* TODO: Implement PEC. */ 15 16 #include "qemu/osdep.h" 17 #include "hw/i2c/i2c.h" 18 #include "hw/i2c/smbus_slave.h" 19 #include "migration/vmstate.h" 20 #include "qemu/module.h" 21 22 //#define DEBUG_SMBUS 1 23 24 #ifdef DEBUG_SMBUS 25 #define DPRINTF(fmt, ...) \ 26 do { printf("smbus(%02x): " fmt , dev->i2c.address, ## __VA_ARGS__); } while (0) 27 #define BADF(fmt, ...) \ 28 do { fprintf(stderr, "smbus: error: " fmt , ## __VA_ARGS__); exit(1);} while (0) 29 #else 30 #define DPRINTF(fmt, ...) do {} while(0) 31 #define BADF(fmt, ...) \ 32 do { fprintf(stderr, "smbus: error: " fmt , ## __VA_ARGS__);} while (0) 33 #endif 34 35 enum { 36 SMBUS_IDLE, 37 SMBUS_WRITE_DATA, 38 SMBUS_READ_DATA, 39 SMBUS_DONE, 40 SMBUS_CONFUSED = -1 41 }; 42 43 static void smbus_do_quick_cmd(SMBusDevice *dev, int recv) 44 { 45 SMBusDeviceClass *sc = SMBUS_DEVICE_GET_CLASS(dev); 46 47 DPRINTF("Quick Command %d\n", recv); 48 if (sc->quick_cmd) { 49 sc->quick_cmd(dev, recv); 50 } 51 } 52 53 static void smbus_do_write(SMBusDevice *dev) 54 { 55 SMBusDeviceClass *sc = SMBUS_DEVICE_GET_CLASS(dev); 56 57 DPRINTF("Command %d len %d\n", dev->data_buf[0], dev->data_len); 58 if (sc->write_data) { 59 sc->write_data(dev, dev->data_buf, dev->data_len); 60 } 61 } 62 63 static int smbus_i2c_event(I2CSlave *s, enum i2c_event event) 64 { 65 SMBusDevice *dev = SMBUS_DEVICE(s); 66 67 switch (event) { 68 case I2C_START_SEND: 69 switch (dev->mode) { 70 case SMBUS_IDLE: 71 DPRINTF("Incoming data\n"); 72 dev->mode = SMBUS_WRITE_DATA; 73 break; 74 75 default: 76 BADF("Unexpected send start condition in state %d\n", dev->mode); 77 dev->mode = SMBUS_CONFUSED; 78 break; 79 } 80 break; 81 82 case I2C_START_RECV: 83 switch (dev->mode) { 84 case SMBUS_IDLE: 85 DPRINTF("Read mode\n"); 86 dev->mode = SMBUS_READ_DATA; 87 break; 88 89 case SMBUS_WRITE_DATA: 90 if (dev->data_len == 0) { 91 BADF("Read after write with no data\n"); 92 dev->mode = SMBUS_CONFUSED; 93 } else { 94 smbus_do_write(dev); 95 DPRINTF("Read mode\n"); 96 dev->mode = SMBUS_READ_DATA; 97 } 98 break; 99 100 default: 101 BADF("Unexpected recv start condition in state %d\n", dev->mode); 102 dev->mode = SMBUS_CONFUSED; 103 break; 104 } 105 break; 106 107 case I2C_FINISH: 108 if (dev->data_len == 0) { 109 if (dev->mode == SMBUS_WRITE_DATA || dev->mode == SMBUS_READ_DATA) { 110 smbus_do_quick_cmd(dev, dev->mode == SMBUS_READ_DATA); 111 } 112 } else { 113 switch (dev->mode) { 114 case SMBUS_WRITE_DATA: 115 smbus_do_write(dev); 116 break; 117 118 case SMBUS_READ_DATA: 119 BADF("Unexpected stop during receive\n"); 120 break; 121 122 default: 123 /* Nothing to do. */ 124 break; 125 } 126 } 127 dev->mode = SMBUS_IDLE; 128 dev->data_len = 0; 129 break; 130 131 case I2C_NACK: 132 switch (dev->mode) { 133 case SMBUS_DONE: 134 /* Nothing to do. */ 135 break; 136 137 case SMBUS_READ_DATA: 138 dev->mode = SMBUS_DONE; 139 break; 140 141 default: 142 BADF("Unexpected NACK in state %d\n", dev->mode); 143 dev->mode = SMBUS_CONFUSED; 144 break; 145 } 146 break; 147 148 default: 149 return -1; 150 } 151 152 return 0; 153 } 154 155 static uint8_t smbus_i2c_recv(I2CSlave *s) 156 { 157 SMBusDevice *dev = SMBUS_DEVICE(s); 158 SMBusDeviceClass *sc = SMBUS_DEVICE_GET_CLASS(dev); 159 uint8_t ret = 0xff; 160 161 switch (dev->mode) { 162 case SMBUS_READ_DATA: 163 if (sc->receive_byte) { 164 ret = sc->receive_byte(dev); 165 } 166 DPRINTF("Read data %02x\n", ret); 167 break; 168 169 default: 170 BADF("Unexpected read in state %d\n", dev->mode); 171 dev->mode = SMBUS_CONFUSED; 172 break; 173 } 174 175 return ret; 176 } 177 178 static int smbus_i2c_send(I2CSlave *s, uint8_t data) 179 { 180 SMBusDevice *dev = SMBUS_DEVICE(s); 181 182 switch (dev->mode) { 183 case SMBUS_WRITE_DATA: 184 DPRINTF("Write data %02x\n", data); 185 if (dev->data_len >= sizeof(dev->data_buf)) { 186 BADF("Too many bytes sent\n"); 187 } else { 188 dev->data_buf[dev->data_len++] = data; 189 } 190 break; 191 192 default: 193 BADF("Unexpected write in state %d\n", dev->mode); 194 break; 195 } 196 197 return 0; 198 } 199 200 static void smbus_device_class_init(ObjectClass *klass, void *data) 201 { 202 I2CSlaveClass *sc = I2C_SLAVE_CLASS(klass); 203 204 sc->event = smbus_i2c_event; 205 sc->recv = smbus_i2c_recv; 206 sc->send = smbus_i2c_send; 207 } 208 209 bool smbus_vmstate_needed(SMBusDevice *dev) 210 { 211 return dev->mode != SMBUS_IDLE; 212 } 213 214 const VMStateDescription vmstate_smbus_device = { 215 .name = TYPE_SMBUS_DEVICE, 216 .version_id = 1, 217 .minimum_version_id = 1, 218 .fields = (VMStateField[]) { 219 VMSTATE_I2C_SLAVE(i2c, SMBusDevice), 220 VMSTATE_INT32(mode, SMBusDevice), 221 VMSTATE_INT32(data_len, SMBusDevice), 222 VMSTATE_UINT8_ARRAY(data_buf, SMBusDevice, SMBUS_DATA_MAX_LEN), 223 VMSTATE_END_OF_LIST() 224 } 225 }; 226 227 static const TypeInfo smbus_device_type_info = { 228 .name = TYPE_SMBUS_DEVICE, 229 .parent = TYPE_I2C_SLAVE, 230 .instance_size = sizeof(SMBusDevice), 231 .abstract = true, 232 .class_size = sizeof(SMBusDeviceClass), 233 .class_init = smbus_device_class_init, 234 }; 235 236 static void smbus_device_register_types(void) 237 { 238 type_register_static(&smbus_device_type_info); 239 } 240 241 type_init(smbus_device_register_types) 242