xref: /openbmc/qemu/hw/i2c/exynos4210_i2c.c (revision fa59483d)
1 /*
2  *  Exynos4210 I2C Bus Serial Interface Emulation
3  *
4  *  Copyright (C) 2012 Samsung Electronics Co Ltd.
5  *    Maksim Kozlov, <m.kozlov@samsung.com>
6  *    Igor Mitsyanko, <i.mitsyanko@samsung.com>
7  *
8  *  This program is free software; you can redistribute it and/or modify it
9  *  under the terms of the GNU General Public License as published by the
10  *  Free Software Foundation; either version 2 of the License, or
11  *  (at your option) any later version.
12  *
13  *  This program is distributed in the hope that it will be useful, but WITHOUT
14  *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
15  *  FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
16  *  for more details.
17  *
18  *  You should have received a copy of the GNU General Public License along
19  *  with this program; if not, see <http://www.gnu.org/licenses/>.
20  *
21  */
22 
23 #include "qemu/osdep.h"
24 #include "qemu/timer.h"
25 #include "hw/sysbus.h"
26 #include "hw/i2c/i2c.h"
27 
28 #ifndef EXYNOS4_I2C_DEBUG
29 #define EXYNOS4_I2C_DEBUG                 0
30 #endif
31 
32 #define TYPE_EXYNOS4_I2C                  "exynos4210.i2c"
33 #define EXYNOS4_I2C(obj)                  \
34     OBJECT_CHECK(Exynos4210I2CState, (obj), TYPE_EXYNOS4_I2C)
35 
36 /* Exynos4210 I2C memory map */
37 #define EXYNOS4_I2C_MEM_SIZE              0x14
38 #define I2CCON_ADDR                       0x00  /* control register */
39 #define I2CSTAT_ADDR                      0x04  /* control/status register */
40 #define I2CADD_ADDR                       0x08  /* address register */
41 #define I2CDS_ADDR                        0x0c  /* data shift register */
42 #define I2CLC_ADDR                        0x10  /* line control register */
43 
44 #define I2CCON_ACK_GEN                    (1 << 7)
45 #define I2CCON_INTRS_EN                   (1 << 5)
46 #define I2CCON_INT_PEND                   (1 << 4)
47 
48 #define EXYNOS4_I2C_MODE(reg)             (((reg) >> 6) & 3)
49 #define I2C_IN_MASTER_MODE(reg)           (((reg) >> 6) & 2)
50 #define I2CMODE_MASTER_Rx                 0x2
51 #define I2CMODE_MASTER_Tx                 0x3
52 #define I2CSTAT_LAST_BIT                  (1 << 0)
53 #define I2CSTAT_OUTPUT_EN                 (1 << 4)
54 #define I2CSTAT_START_BUSY                (1 << 5)
55 
56 
57 #if EXYNOS4_I2C_DEBUG
58 #define DPRINT(fmt, args...)              \
59     do { fprintf(stderr, "QEMU I2C: "fmt, ## args); } while (0)
60 
61 static const char *exynos4_i2c_get_regname(unsigned offset)
62 {
63     switch (offset) {
64     case I2CCON_ADDR:
65         return "I2CCON";
66     case I2CSTAT_ADDR:
67         return "I2CSTAT";
68     case I2CADD_ADDR:
69         return "I2CADD";
70     case I2CDS_ADDR:
71         return "I2CDS";
72     case I2CLC_ADDR:
73         return "I2CLC";
74     default:
75         return "[?]";
76     }
77 }
78 
79 #else
80 #define DPRINT(fmt, args...)              do { } while (0)
81 #endif
82 
83 typedef struct Exynos4210I2CState {
84     SysBusDevice parent_obj;
85 
86     MemoryRegion iomem;
87     I2CBus *bus;
88     qemu_irq irq;
89 
90     uint8_t i2ccon;
91     uint8_t i2cstat;
92     uint8_t i2cadd;
93     uint8_t i2cds;
94     uint8_t i2clc;
95     bool scl_free;
96 } Exynos4210I2CState;
97 
98 static inline void exynos4210_i2c_raise_interrupt(Exynos4210I2CState *s)
99 {
100     if (s->i2ccon & I2CCON_INTRS_EN) {
101         s->i2ccon |= I2CCON_INT_PEND;
102         qemu_irq_raise(s->irq);
103     }
104 }
105 
106 static void exynos4210_i2c_data_receive(void *opaque)
107 {
108     Exynos4210I2CState *s = (Exynos4210I2CState *)opaque;
109 
110     s->i2cstat &= ~I2CSTAT_LAST_BIT;
111     s->scl_free = false;
112     s->i2cds = i2c_recv(s->bus);
113     exynos4210_i2c_raise_interrupt(s);
114 }
115 
116 static void exynos4210_i2c_data_send(void *opaque)
117 {
118     Exynos4210I2CState *s = (Exynos4210I2CState *)opaque;
119 
120     s->i2cstat &= ~I2CSTAT_LAST_BIT;
121     s->scl_free = false;
122     if (i2c_send(s->bus, s->i2cds) < 0 && (s->i2ccon & I2CCON_ACK_GEN)) {
123         s->i2cstat |= I2CSTAT_LAST_BIT;
124     }
125     exynos4210_i2c_raise_interrupt(s);
126 }
127 
128 static uint64_t exynos4210_i2c_read(void *opaque, hwaddr offset,
129                                  unsigned size)
130 {
131     Exynos4210I2CState *s = (Exynos4210I2CState *)opaque;
132     uint8_t value;
133 
134     switch (offset) {
135     case I2CCON_ADDR:
136         value = s->i2ccon;
137         break;
138     case I2CSTAT_ADDR:
139         value = s->i2cstat;
140         break;
141     case I2CADD_ADDR:
142         value = s->i2cadd;
143         break;
144     case I2CDS_ADDR:
145         value = s->i2cds;
146         s->scl_free = true;
147         if (EXYNOS4_I2C_MODE(s->i2cstat) == I2CMODE_MASTER_Rx &&
148                (s->i2cstat & I2CSTAT_START_BUSY) &&
149                !(s->i2ccon & I2CCON_INT_PEND)) {
150             exynos4210_i2c_data_receive(s);
151         }
152         break;
153     case I2CLC_ADDR:
154         value = s->i2clc;
155         break;
156     default:
157         value = 0;
158         DPRINT("ERROR: Bad read offset 0x%x\n", (unsigned int)offset);
159         break;
160     }
161 
162     DPRINT("read %s [0x%02x] -> 0x%02x\n", exynos4_i2c_get_regname(offset),
163             (unsigned int)offset, value);
164     return value;
165 }
166 
167 static void exynos4210_i2c_write(void *opaque, hwaddr offset,
168                               uint64_t value, unsigned size)
169 {
170     Exynos4210I2CState *s = (Exynos4210I2CState *)opaque;
171     uint8_t v = value & 0xff;
172 
173     DPRINT("write %s [0x%02x] <- 0x%02x\n", exynos4_i2c_get_regname(offset),
174             (unsigned int)offset, v);
175 
176     switch (offset) {
177     case I2CCON_ADDR:
178         s->i2ccon = (v & ~I2CCON_INT_PEND) | (s->i2ccon & I2CCON_INT_PEND);
179         if ((s->i2ccon & I2CCON_INT_PEND) && !(v & I2CCON_INT_PEND)) {
180             s->i2ccon &= ~I2CCON_INT_PEND;
181             qemu_irq_lower(s->irq);
182             if (!(s->i2ccon & I2CCON_INTRS_EN)) {
183                 s->i2cstat &= ~I2CSTAT_START_BUSY;
184             }
185 
186             if (s->i2cstat & I2CSTAT_START_BUSY) {
187                 if (s->scl_free) {
188                     if (EXYNOS4_I2C_MODE(s->i2cstat) == I2CMODE_MASTER_Tx) {
189                         exynos4210_i2c_data_send(s);
190                     } else if (EXYNOS4_I2C_MODE(s->i2cstat) ==
191                             I2CMODE_MASTER_Rx) {
192                         exynos4210_i2c_data_receive(s);
193                     }
194                 } else {
195                     s->i2ccon |= I2CCON_INT_PEND;
196                     qemu_irq_raise(s->irq);
197                 }
198             }
199         }
200         break;
201     case I2CSTAT_ADDR:
202         s->i2cstat =
203                 (s->i2cstat & I2CSTAT_START_BUSY) | (v & ~I2CSTAT_START_BUSY);
204 
205         if (!(s->i2cstat & I2CSTAT_OUTPUT_EN)) {
206             s->i2cstat &= ~I2CSTAT_START_BUSY;
207             s->scl_free = true;
208             qemu_irq_lower(s->irq);
209             break;
210         }
211 
212         /* Nothing to do if in i2c slave mode */
213         if (!I2C_IN_MASTER_MODE(s->i2cstat)) {
214             break;
215         }
216 
217         if (v & I2CSTAT_START_BUSY) {
218             s->i2cstat &= ~I2CSTAT_LAST_BIT;
219             s->i2cstat |= I2CSTAT_START_BUSY;    /* Line is busy */
220             s->scl_free = false;
221 
222             /* Generate start bit and send slave address */
223             if (i2c_start_transfer(s->bus, s->i2cds >> 1, s->i2cds & 0x1) &&
224                     (s->i2ccon & I2CCON_ACK_GEN)) {
225                 s->i2cstat |= I2CSTAT_LAST_BIT;
226             } else if (EXYNOS4_I2C_MODE(s->i2cstat) == I2CMODE_MASTER_Rx) {
227                 exynos4210_i2c_data_receive(s);
228             }
229             exynos4210_i2c_raise_interrupt(s);
230         } else {
231             i2c_end_transfer(s->bus);
232             if (!(s->i2ccon & I2CCON_INT_PEND)) {
233                 s->i2cstat &= ~I2CSTAT_START_BUSY;
234             }
235             s->scl_free = true;
236         }
237         break;
238     case I2CADD_ADDR:
239         if ((s->i2cstat & I2CSTAT_OUTPUT_EN) == 0) {
240             s->i2cadd = v;
241         }
242         break;
243     case I2CDS_ADDR:
244         if (s->i2cstat & I2CSTAT_OUTPUT_EN) {
245             s->i2cds = v;
246             s->scl_free = true;
247             if (EXYNOS4_I2C_MODE(s->i2cstat) == I2CMODE_MASTER_Tx &&
248                     (s->i2cstat & I2CSTAT_START_BUSY) &&
249                     !(s->i2ccon & I2CCON_INT_PEND)) {
250                 exynos4210_i2c_data_send(s);
251             }
252         }
253         break;
254     case I2CLC_ADDR:
255         s->i2clc = v;
256         break;
257     default:
258         DPRINT("ERROR: Bad write offset 0x%x\n", (unsigned int)offset);
259         break;
260     }
261 }
262 
263 static const MemoryRegionOps exynos4210_i2c_ops = {
264     .read = exynos4210_i2c_read,
265     .write = exynos4210_i2c_write,
266     .endianness = DEVICE_NATIVE_ENDIAN,
267 };
268 
269 static const VMStateDescription exynos4210_i2c_vmstate = {
270     .name = "exynos4210.i2c",
271     .version_id = 1,
272     .minimum_version_id = 1,
273     .fields = (VMStateField[]) {
274         VMSTATE_UINT8(i2ccon, Exynos4210I2CState),
275         VMSTATE_UINT8(i2cstat, Exynos4210I2CState),
276         VMSTATE_UINT8(i2cds, Exynos4210I2CState),
277         VMSTATE_UINT8(i2cadd, Exynos4210I2CState),
278         VMSTATE_UINT8(i2clc, Exynos4210I2CState),
279         VMSTATE_BOOL(scl_free, Exynos4210I2CState),
280         VMSTATE_END_OF_LIST()
281     }
282 };
283 
284 static void exynos4210_i2c_reset(DeviceState *d)
285 {
286     Exynos4210I2CState *s = EXYNOS4_I2C(d);
287 
288     s->i2ccon  = 0x00;
289     s->i2cstat = 0x00;
290     s->i2cds   = 0xFF;
291     s->i2clc   = 0x00;
292     s->i2cadd  = 0xFF;
293     s->scl_free = true;
294 }
295 
296 static void exynos4210_i2c_init(Object *obj)
297 {
298     DeviceState *dev = DEVICE(obj);
299     Exynos4210I2CState *s = EXYNOS4_I2C(obj);
300     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
301 
302     memory_region_init_io(&s->iomem, obj, &exynos4210_i2c_ops, s,
303                           TYPE_EXYNOS4_I2C, EXYNOS4_I2C_MEM_SIZE);
304     sysbus_init_mmio(sbd, &s->iomem);
305     sysbus_init_irq(sbd, &s->irq);
306     s->bus = i2c_init_bus(dev, "i2c");
307 }
308 
309 static void exynos4210_i2c_class_init(ObjectClass *klass, void *data)
310 {
311     DeviceClass *dc = DEVICE_CLASS(klass);
312 
313     dc->vmsd = &exynos4210_i2c_vmstate;
314     dc->reset = exynos4210_i2c_reset;
315 }
316 
317 static const TypeInfo exynos4210_i2c_type_info = {
318     .name = TYPE_EXYNOS4_I2C,
319     .parent = TYPE_SYS_BUS_DEVICE,
320     .instance_size = sizeof(Exynos4210I2CState),
321     .instance_init = exynos4210_i2c_init,
322     .class_init = exynos4210_i2c_class_init,
323 };
324 
325 static void exynos4210_i2c_register_types(void)
326 {
327     type_register_static(&exynos4210_i2c_type_info);
328 }
329 
330 type_init(exynos4210_i2c_register_types)
331