xref: /openbmc/qemu/hw/i2c/exynos4210_i2c.c (revision 1d300b5f)
1 /*
2  *  Exynos4210 I2C Bus Serial Interface Emulation
3  *
4  *  Copyright (C) 2012 Samsung Electronics Co Ltd.
5  *    Maksim Kozlov, <m.kozlov@samsung.com>
6  *    Igor Mitsyanko, <i.mitsyanko@samsung.com>
7  *
8  *  This program is free software; you can redistribute it and/or modify it
9  *  under the terms of the GNU General Public License as published by the
10  *  Free Software Foundation; either version 2 of the License, or
11  *  (at your option) any later version.
12  *
13  *  This program is distributed in the hope that it will be useful, but WITHOUT
14  *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
15  *  FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
16  *  for more details.
17  *
18  *  You should have received a copy of the GNU General Public License along
19  *  with this program; if not, see <http://www.gnu.org/licenses/>.
20  *
21  */
22 
23 #include "qemu/timer.h"
24 #include "hw/sysbus.h"
25 #include "hw/i2c/i2c.h"
26 
27 #ifndef EXYNOS4_I2C_DEBUG
28 #define EXYNOS4_I2C_DEBUG                 0
29 #endif
30 
31 #define TYPE_EXYNOS4_I2C                  "exynos4210.i2c"
32 #define EXYNOS4_I2C(obj)                  \
33     OBJECT_CHECK(Exynos4210I2CState, (obj), TYPE_EXYNOS4_I2C)
34 
35 /* Exynos4210 I2C memory map */
36 #define EXYNOS4_I2C_MEM_SIZE              0x14
37 #define I2CCON_ADDR                       0x00  /* control register */
38 #define I2CSTAT_ADDR                      0x04  /* control/status register */
39 #define I2CADD_ADDR                       0x08  /* address register */
40 #define I2CDS_ADDR                        0x0c  /* data shift register */
41 #define I2CLC_ADDR                        0x10  /* line control register */
42 
43 #define I2CCON_ACK_GEN                    (1 << 7)
44 #define I2CCON_INTRS_EN                   (1 << 5)
45 #define I2CCON_INT_PEND                   (1 << 4)
46 
47 #define EXYNOS4_I2C_MODE(reg)             (((reg) >> 6) & 3)
48 #define I2C_IN_MASTER_MODE(reg)           (((reg) >> 6) & 2)
49 #define I2CMODE_MASTER_Rx                 0x2
50 #define I2CMODE_MASTER_Tx                 0x3
51 #define I2CSTAT_LAST_BIT                  (1 << 0)
52 #define I2CSTAT_OUTPUT_EN                 (1 << 4)
53 #define I2CSTAT_START_BUSY                (1 << 5)
54 
55 
56 #if EXYNOS4_I2C_DEBUG
57 #define DPRINT(fmt, args...)              \
58     do { fprintf(stderr, "QEMU I2C: "fmt, ## args); } while (0)
59 
60 static const char *exynos4_i2c_get_regname(unsigned offset)
61 {
62     switch (offset) {
63     case I2CCON_ADDR:
64         return "I2CCON";
65     case I2CSTAT_ADDR:
66         return "I2CSTAT";
67     case I2CADD_ADDR:
68         return "I2CADD";
69     case I2CDS_ADDR:
70         return "I2CDS";
71     case I2CLC_ADDR:
72         return "I2CLC";
73     default:
74         return "[?]";
75     }
76 }
77 
78 #else
79 #define DPRINT(fmt, args...)              do { } while (0)
80 #endif
81 
82 typedef struct Exynos4210I2CState {
83     SysBusDevice busdev;
84     MemoryRegion iomem;
85     i2c_bus *bus;
86     qemu_irq irq;
87 
88     uint8_t i2ccon;
89     uint8_t i2cstat;
90     uint8_t i2cadd;
91     uint8_t i2cds;
92     uint8_t i2clc;
93     bool scl_free;
94 } Exynos4210I2CState;
95 
96 static inline void exynos4210_i2c_raise_interrupt(Exynos4210I2CState *s)
97 {
98     if (s->i2ccon & I2CCON_INTRS_EN) {
99         s->i2ccon |= I2CCON_INT_PEND;
100         qemu_irq_raise(s->irq);
101     }
102 }
103 
104 static void exynos4210_i2c_data_receive(void *opaque)
105 {
106     Exynos4210I2CState *s = (Exynos4210I2CState *)opaque;
107     int ret;
108 
109     s->i2cstat &= ~I2CSTAT_LAST_BIT;
110     s->scl_free = false;
111     ret = i2c_recv(s->bus);
112     if (ret < 0 && (s->i2ccon & I2CCON_ACK_GEN)) {
113         s->i2cstat |= I2CSTAT_LAST_BIT;  /* Data is not acknowledged */
114     } else {
115         s->i2cds = ret;
116     }
117     exynos4210_i2c_raise_interrupt(s);
118 }
119 
120 static void exynos4210_i2c_data_send(void *opaque)
121 {
122     Exynos4210I2CState *s = (Exynos4210I2CState *)opaque;
123 
124     s->i2cstat &= ~I2CSTAT_LAST_BIT;
125     s->scl_free = false;
126     if (i2c_send(s->bus, s->i2cds) < 0 && (s->i2ccon & I2CCON_ACK_GEN)) {
127         s->i2cstat |= I2CSTAT_LAST_BIT;
128     }
129     exynos4210_i2c_raise_interrupt(s);
130 }
131 
132 static uint64_t exynos4210_i2c_read(void *opaque, hwaddr offset,
133                                  unsigned size)
134 {
135     Exynos4210I2CState *s = (Exynos4210I2CState *)opaque;
136     uint8_t value;
137 
138     switch (offset) {
139     case I2CCON_ADDR:
140         value = s->i2ccon;
141         break;
142     case I2CSTAT_ADDR:
143         value = s->i2cstat;
144         break;
145     case I2CADD_ADDR:
146         value = s->i2cadd;
147         break;
148     case I2CDS_ADDR:
149         value = s->i2cds;
150         s->scl_free = true;
151         if (EXYNOS4_I2C_MODE(s->i2cstat) == I2CMODE_MASTER_Rx &&
152                (s->i2cstat & I2CSTAT_START_BUSY) &&
153                !(s->i2ccon & I2CCON_INT_PEND)) {
154             exynos4210_i2c_data_receive(s);
155         }
156         break;
157     case I2CLC_ADDR:
158         value = s->i2clc;
159         break;
160     default:
161         value = 0;
162         DPRINT("ERROR: Bad read offset 0x%x\n", (unsigned int)offset);
163         break;
164     }
165 
166     DPRINT("read %s [0x%02x] -> 0x%02x\n", exynos4_i2c_get_regname(offset),
167             (unsigned int)offset, value);
168     return value;
169 }
170 
171 static void exynos4210_i2c_write(void *opaque, hwaddr offset,
172                               uint64_t value, unsigned size)
173 {
174     Exynos4210I2CState *s = (Exynos4210I2CState *)opaque;
175     uint8_t v = value & 0xff;
176 
177     DPRINT("write %s [0x%02x] <- 0x%02x\n", exynos4_i2c_get_regname(offset),
178             (unsigned int)offset, v);
179 
180     switch (offset) {
181     case I2CCON_ADDR:
182         s->i2ccon = (v & ~I2CCON_INT_PEND) | (s->i2ccon & I2CCON_INT_PEND);
183         if ((s->i2ccon & I2CCON_INT_PEND) && !(v & I2CCON_INT_PEND)) {
184             s->i2ccon &= ~I2CCON_INT_PEND;
185             qemu_irq_lower(s->irq);
186             if (!(s->i2ccon & I2CCON_INTRS_EN)) {
187                 s->i2cstat &= ~I2CSTAT_START_BUSY;
188             }
189 
190             if (s->i2cstat & I2CSTAT_START_BUSY) {
191                 if (s->scl_free) {
192                     if (EXYNOS4_I2C_MODE(s->i2cstat) == I2CMODE_MASTER_Tx) {
193                         exynos4210_i2c_data_send(s);
194                     } else if (EXYNOS4_I2C_MODE(s->i2cstat) ==
195                             I2CMODE_MASTER_Rx) {
196                         exynos4210_i2c_data_receive(s);
197                     }
198                 } else {
199                     s->i2ccon |= I2CCON_INT_PEND;
200                     qemu_irq_raise(s->irq);
201                 }
202             }
203         }
204         break;
205     case I2CSTAT_ADDR:
206         s->i2cstat =
207                 (s->i2cstat & I2CSTAT_START_BUSY) | (v & ~I2CSTAT_START_BUSY);
208 
209         if (!(s->i2cstat & I2CSTAT_OUTPUT_EN)) {
210             s->i2cstat &= ~I2CSTAT_START_BUSY;
211             s->scl_free = true;
212             qemu_irq_lower(s->irq);
213             break;
214         }
215 
216         /* Nothing to do if in i2c slave mode */
217         if (!I2C_IN_MASTER_MODE(s->i2cstat)) {
218             break;
219         }
220 
221         if (v & I2CSTAT_START_BUSY) {
222             s->i2cstat &= ~I2CSTAT_LAST_BIT;
223             s->i2cstat |= I2CSTAT_START_BUSY;    /* Line is busy */
224             s->scl_free = false;
225 
226             /* Generate start bit and send slave address */
227             if (i2c_start_transfer(s->bus, s->i2cds >> 1, s->i2cds & 0x1) &&
228                     (s->i2ccon & I2CCON_ACK_GEN)) {
229                 s->i2cstat |= I2CSTAT_LAST_BIT;
230             } else if (EXYNOS4_I2C_MODE(s->i2cstat) == I2CMODE_MASTER_Rx) {
231                 exynos4210_i2c_data_receive(s);
232             }
233             exynos4210_i2c_raise_interrupt(s);
234         } else {
235             i2c_end_transfer(s->bus);
236             if (!(s->i2ccon & I2CCON_INT_PEND)) {
237                 s->i2cstat &= ~I2CSTAT_START_BUSY;
238             }
239             s->scl_free = true;
240         }
241         break;
242     case I2CADD_ADDR:
243         if ((s->i2cstat & I2CSTAT_OUTPUT_EN) == 0) {
244             s->i2cadd = v;
245         }
246         break;
247     case I2CDS_ADDR:
248         if (s->i2cstat & I2CSTAT_OUTPUT_EN) {
249             s->i2cds = v;
250             s->scl_free = true;
251             if (EXYNOS4_I2C_MODE(s->i2cstat) == I2CMODE_MASTER_Tx &&
252                     (s->i2cstat & I2CSTAT_START_BUSY) &&
253                     !(s->i2ccon & I2CCON_INT_PEND)) {
254                 exynos4210_i2c_data_send(s);
255             }
256         }
257         break;
258     case I2CLC_ADDR:
259         s->i2clc = v;
260         break;
261     default:
262         DPRINT("ERROR: Bad write offset 0x%x\n", (unsigned int)offset);
263         break;
264     }
265 }
266 
267 static const MemoryRegionOps exynos4210_i2c_ops = {
268     .read = exynos4210_i2c_read,
269     .write = exynos4210_i2c_write,
270     .endianness = DEVICE_NATIVE_ENDIAN,
271 };
272 
273 static const VMStateDescription exynos4210_i2c_vmstate = {
274     .name = "exynos4210.i2c",
275     .version_id = 1,
276     .minimum_version_id = 1,
277     .fields = (VMStateField[]) {
278         VMSTATE_UINT8(i2ccon, Exynos4210I2CState),
279         VMSTATE_UINT8(i2cstat, Exynos4210I2CState),
280         VMSTATE_UINT8(i2cds, Exynos4210I2CState),
281         VMSTATE_UINT8(i2cadd, Exynos4210I2CState),
282         VMSTATE_UINT8(i2clc, Exynos4210I2CState),
283         VMSTATE_BOOL(scl_free, Exynos4210I2CState),
284         VMSTATE_END_OF_LIST()
285     }
286 };
287 
288 static void exynos4210_i2c_reset(DeviceState *d)
289 {
290     Exynos4210I2CState *s = EXYNOS4_I2C(d);
291 
292     s->i2ccon  = 0x00;
293     s->i2cstat = 0x00;
294     s->i2cds   = 0xFF;
295     s->i2clc   = 0x00;
296     s->i2cadd  = 0xFF;
297     s->scl_free = true;
298 }
299 
300 static int exynos4210_i2c_realize(SysBusDevice *dev)
301 {
302     Exynos4210I2CState *s = EXYNOS4_I2C(dev);
303 
304     memory_region_init_io(&s->iomem, OBJECT(s), &exynos4210_i2c_ops, s,
305                           TYPE_EXYNOS4_I2C, EXYNOS4_I2C_MEM_SIZE);
306     sysbus_init_mmio(dev, &s->iomem);
307     sysbus_init_irq(dev, &s->irq);
308     s->bus = i2c_init_bus(&dev->qdev, "i2c");
309     return 0;
310 }
311 
312 static void exynos4210_i2c_class_init(ObjectClass *klass, void *data)
313 {
314     DeviceClass *dc = DEVICE_CLASS(klass);
315     SysBusDeviceClass *sbdc = SYS_BUS_DEVICE_CLASS(klass);
316 
317     dc->vmsd = &exynos4210_i2c_vmstate;
318     dc->reset = exynos4210_i2c_reset;
319     sbdc->init = exynos4210_i2c_realize;
320 }
321 
322 static const TypeInfo exynos4210_i2c_type_info = {
323     .name = TYPE_EXYNOS4_I2C,
324     .parent = TYPE_SYS_BUS_DEVICE,
325     .instance_size = sizeof(Exynos4210I2CState),
326     .class_init = exynos4210_i2c_class_init,
327 };
328 
329 static void exynos4210_i2c_register_types(void)
330 {
331     type_register_static(&exynos4210_i2c_type_info);
332 }
333 
334 type_init(exynos4210_i2c_register_types)
335