1 /* 2 * Bit-Bang i2c emulation extracted from 3 * Marvell MV88W8618 / Freecom MusicPal emulation. 4 * 5 * Copyright (c) 2008 Jan Kiszka 6 * 7 * This code is licensed under the GNU GPL v2. 8 * 9 * Contributions after 2012-01-13 are licensed under the terms of the 10 * GNU GPL, version 2 or (at your option) any later version. 11 */ 12 13 #include "qemu/osdep.h" 14 #include "hw/hw.h" 15 #include "hw/i2c/bitbang_i2c.h" 16 #include "hw/sysbus.h" 17 #include "qemu/module.h" 18 19 //#define DEBUG_BITBANG_I2C 20 21 #ifdef DEBUG_BITBANG_I2C 22 #define DPRINTF(fmt, ...) \ 23 do { printf("bitbang_i2c: " fmt , ## __VA_ARGS__); } while (0) 24 #else 25 #define DPRINTF(fmt, ...) do {} while(0) 26 #endif 27 28 static void bitbang_i2c_enter_stop(bitbang_i2c_interface *i2c) 29 { 30 DPRINTF("STOP\n"); 31 if (i2c->current_addr >= 0) 32 i2c_end_transfer(i2c->bus); 33 i2c->current_addr = -1; 34 i2c->state = STOPPED; 35 } 36 37 /* Set device data pin. */ 38 static int bitbang_i2c_ret(bitbang_i2c_interface *i2c, int level) 39 { 40 i2c->device_out = level; 41 //DPRINTF("%d %d %d\n", i2c->last_clock, i2c->last_data, i2c->device_out); 42 return level & i2c->last_data; 43 } 44 45 /* Leave device data pin unodified. */ 46 static int bitbang_i2c_nop(bitbang_i2c_interface *i2c) 47 { 48 return bitbang_i2c_ret(i2c, i2c->device_out); 49 } 50 51 /* Returns data line level. */ 52 int bitbang_i2c_set(bitbang_i2c_interface *i2c, int line, int level) 53 { 54 int data; 55 56 if (level != 0 && level != 1) { 57 abort(); 58 } 59 60 if (line == BITBANG_I2C_SDA) { 61 if (level == i2c->last_data) { 62 return bitbang_i2c_nop(i2c); 63 } 64 i2c->last_data = level; 65 if (i2c->last_clock == 0) { 66 return bitbang_i2c_nop(i2c); 67 } 68 if (level == 0) { 69 DPRINTF("START\n"); 70 /* START condition. */ 71 i2c->state = SENDING_BIT7; 72 i2c->current_addr = -1; 73 } else { 74 /* STOP condition. */ 75 bitbang_i2c_enter_stop(i2c); 76 } 77 return bitbang_i2c_ret(i2c, 1); 78 } 79 80 data = i2c->last_data; 81 if (i2c->last_clock == level) { 82 return bitbang_i2c_nop(i2c); 83 } 84 i2c->last_clock = level; 85 if (level == 0) { 86 /* State is set/read at the start of the clock pulse. 87 release the data line at the end. */ 88 return bitbang_i2c_ret(i2c, 1); 89 } 90 switch (i2c->state) { 91 case STOPPED: 92 case SENT_NACK: 93 return bitbang_i2c_ret(i2c, 1); 94 95 case SENDING_BIT7 ... SENDING_BIT0: 96 i2c->buffer = (i2c->buffer << 1) | data; 97 /* will end up in WAITING_FOR_ACK */ 98 i2c->state++; 99 return bitbang_i2c_ret(i2c, 1); 100 101 case WAITING_FOR_ACK: 102 { 103 int ret; 104 105 if (i2c->current_addr < 0) { 106 i2c->current_addr = i2c->buffer; 107 DPRINTF("Address 0x%02x\n", i2c->current_addr); 108 ret = i2c_start_transfer(i2c->bus, i2c->current_addr >> 1, 109 i2c->current_addr & 1); 110 } else { 111 DPRINTF("Sent 0x%02x\n", i2c->buffer); 112 ret = i2c_send(i2c->bus, i2c->buffer); 113 } 114 if (ret) { 115 /* NACK (either addressing a nonexistent device, or the 116 * device we were sending to decided to NACK us). 117 */ 118 DPRINTF("Got NACK\n"); 119 bitbang_i2c_enter_stop(i2c); 120 return bitbang_i2c_ret(i2c, 1); 121 } 122 if (i2c->current_addr & 1) { 123 i2c->state = RECEIVING_BIT7; 124 } else { 125 i2c->state = SENDING_BIT7; 126 } 127 return bitbang_i2c_ret(i2c, 0); 128 } 129 case RECEIVING_BIT7: 130 i2c->buffer = i2c_recv(i2c->bus); 131 DPRINTF("RX byte 0x%02x\n", i2c->buffer); 132 /* Fall through... */ 133 case RECEIVING_BIT6 ... RECEIVING_BIT0: 134 data = i2c->buffer >> 7; 135 /* will end up in SENDING_ACK */ 136 i2c->state++; 137 i2c->buffer <<= 1; 138 return bitbang_i2c_ret(i2c, data); 139 140 case SENDING_ACK: 141 i2c->state = RECEIVING_BIT7; 142 if (data != 0) { 143 DPRINTF("NACKED\n"); 144 i2c->state = SENT_NACK; 145 i2c_nack(i2c->bus); 146 } else { 147 DPRINTF("ACKED\n"); 148 } 149 return bitbang_i2c_ret(i2c, 1); 150 } 151 abort(); 152 } 153 154 void bitbang_i2c_init(bitbang_i2c_interface *s, I2CBus *bus) 155 { 156 s->bus = bus; 157 s->last_data = 1; 158 s->last_clock = 1; 159 s->device_out = 1; 160 } 161 162 /* GPIO interface. */ 163 164 #define TYPE_GPIO_I2C "gpio_i2c" 165 #define GPIO_I2C(obj) OBJECT_CHECK(GPIOI2CState, (obj), TYPE_GPIO_I2C) 166 167 typedef struct GPIOI2CState { 168 SysBusDevice parent_obj; 169 170 MemoryRegion dummy_iomem; 171 bitbang_i2c_interface bitbang; 172 int last_level; 173 qemu_irq out; 174 } GPIOI2CState; 175 176 static void bitbang_i2c_gpio_set(void *opaque, int irq, int level) 177 { 178 GPIOI2CState *s = opaque; 179 180 level = bitbang_i2c_set(&s->bitbang, irq, level); 181 if (level != s->last_level) { 182 s->last_level = level; 183 qemu_set_irq(s->out, level); 184 } 185 } 186 187 static void gpio_i2c_init(Object *obj) 188 { 189 DeviceState *dev = DEVICE(obj); 190 GPIOI2CState *s = GPIO_I2C(obj); 191 SysBusDevice *sbd = SYS_BUS_DEVICE(obj); 192 I2CBus *bus; 193 194 memory_region_init(&s->dummy_iomem, obj, "gpio_i2c", 0); 195 sysbus_init_mmio(sbd, &s->dummy_iomem); 196 197 bus = i2c_init_bus(dev, "i2c"); 198 bitbang_i2c_init(&s->bitbang, bus); 199 200 qdev_init_gpio_in(dev, bitbang_i2c_gpio_set, 2); 201 qdev_init_gpio_out(dev, &s->out, 1); 202 } 203 204 static void gpio_i2c_class_init(ObjectClass *klass, void *data) 205 { 206 DeviceClass *dc = DEVICE_CLASS(klass); 207 208 set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories); 209 dc->desc = "Virtual GPIO to I2C bridge"; 210 } 211 212 static const TypeInfo gpio_i2c_info = { 213 .name = TYPE_GPIO_I2C, 214 .parent = TYPE_SYS_BUS_DEVICE, 215 .instance_size = sizeof(GPIOI2CState), 216 .instance_init = gpio_i2c_init, 217 .class_init = gpio_i2c_class_init, 218 }; 219 220 static void bitbang_i2c_register_types(void) 221 { 222 type_register_static(&gpio_i2c_info); 223 } 224 225 type_init(bitbang_i2c_register_types) 226