1 /* HPPA cores and system support chips. */ 2 /* Be aware: QEMU and seabios-hppa repositories share this file as-is. */ 3 4 #ifndef HW_HPPA_HPPA_HARDWARE_H 5 #define HW_HPPA_HPPA_HARDWARE_H 6 7 #define FIRMWARE_START 0xf0000000 8 #define FIRMWARE_END 0xf0800000 9 10 #define DEVICE_HPA_LEN 0x00100000 11 12 #define GSC_HPA 0xffc00000 13 #define DINO_HPA 0xfff80000 14 #define DINO_UART_HPA 0xfff83000 15 #define DINO_UART_BASE 0xfff83800 16 #define DINO_SCSI_HPA 0xfff8c000 17 #define LASI_HPA 0xffd00000 18 #define LASI_UART_HPA 0xffd05000 19 #define LASI_SCSI_HPA 0xffd06000 20 #define LASI_LAN_HPA 0xffd07000 21 #define LASI_RTC_HPA 0xffd09000 22 #define LASI_LPT_HPA 0xffd02000 23 #define LASI_AUDIO_HPA 0xffd04000 24 #define LASI_PS2KBD_HPA 0xffd08000 25 #define LASI_PS2MOU_HPA 0xffd08100 26 #define LASI_GFX_HPA 0xf8000000 27 #define ARTIST_FB_ADDR 0xf9000000 28 #define CPU_HPA 0xfffb0000 29 #define MEMORY_HPA 0xfffff000 30 31 #define PCI_HPA DINO_HPA /* PCI bus */ 32 #define IDE_HPA 0xf9000000 /* Boot disc controller */ 33 34 /* offsets to DINO HPA: */ 35 #define DINO_PCI_ADDR 0x064 36 #define DINO_CONFIG_DATA 0x068 37 #define DINO_IO_DATA 0x06c 38 39 #define PORT_PCI_CMD (PCI_HPA + DINO_PCI_ADDR) 40 #define PORT_PCI_DATA (PCI_HPA + DINO_CONFIG_DATA) 41 42 #define FW_CFG_IO_BASE 0xfffa0000 43 44 #define PORT_SERIAL1 (LASI_UART_HPA + 0x800) 45 #define PORT_SERIAL2 (DINO_UART_HPA + 0x800) 46 47 #define HPPA_MAX_CPUS 16 /* max. number of SMP CPUs */ 48 #define CPU_CLOCK_MHZ 250 /* emulate a 250 MHz CPU */ 49 50 #define CPU_HPA_CR_REG 7 /* store CPU HPA in cr7 (SeaBIOS internal) */ 51 #define PIM_STORAGE_SIZE 600 /* storage size of pdc_pim_toc_struct (64bit) */ 52 53 #endif 54