1 /* 2 * TI OMAP processors GPIO emulation. 3 * 4 * Copyright (C) 2006-2008 Andrzej Zaborowski <balrog@zabor.org> 5 * Copyright (C) 2007-2009 Nokia Corporation 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 or 10 * (at your option) version 3 of the License. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License along 18 * with this program; if not, see <http://www.gnu.org/licenses/>. 19 */ 20 21 #include "qemu/osdep.h" 22 #include "hw/hw.h" 23 #include "hw/arm/omap.h" 24 #include "hw/sysbus.h" 25 #include "qemu/error-report.h" 26 #include "qapi/error.h" 27 28 struct omap_gpio_s { 29 qemu_irq irq; 30 qemu_irq handler[16]; 31 32 uint16_t inputs; 33 uint16_t outputs; 34 uint16_t dir; 35 uint16_t edge; 36 uint16_t mask; 37 uint16_t ints; 38 uint16_t pins; 39 }; 40 41 #define TYPE_OMAP1_GPIO "omap-gpio" 42 #define OMAP1_GPIO(obj) \ 43 OBJECT_CHECK(struct omap_gpif_s, (obj), TYPE_OMAP1_GPIO) 44 45 struct omap_gpif_s { 46 SysBusDevice parent_obj; 47 48 MemoryRegion iomem; 49 int mpu_model; 50 void *clk; 51 struct omap_gpio_s omap1; 52 }; 53 54 /* General-Purpose I/O of OMAP1 */ 55 static void omap_gpio_set(void *opaque, int line, int level) 56 { 57 struct omap_gpio_s *s = &((struct omap_gpif_s *) opaque)->omap1; 58 uint16_t prev = s->inputs; 59 60 if (level) 61 s->inputs |= 1 << line; 62 else 63 s->inputs &= ~(1 << line); 64 65 if (((s->edge & s->inputs & ~prev) | (~s->edge & ~s->inputs & prev)) & 66 (1 << line) & s->dir & ~s->mask) { 67 s->ints |= 1 << line; 68 qemu_irq_raise(s->irq); 69 } 70 } 71 72 static uint64_t omap_gpio_read(void *opaque, hwaddr addr, 73 unsigned size) 74 { 75 struct omap_gpio_s *s = (struct omap_gpio_s *) opaque; 76 int offset = addr & OMAP_MPUI_REG_MASK; 77 78 if (size != 2) { 79 return omap_badwidth_read16(opaque, addr); 80 } 81 82 switch (offset) { 83 case 0x00: /* DATA_INPUT */ 84 return s->inputs & s->pins; 85 86 case 0x04: /* DATA_OUTPUT */ 87 return s->outputs; 88 89 case 0x08: /* DIRECTION_CONTROL */ 90 return s->dir; 91 92 case 0x0c: /* INTERRUPT_CONTROL */ 93 return s->edge; 94 95 case 0x10: /* INTERRUPT_MASK */ 96 return s->mask; 97 98 case 0x14: /* INTERRUPT_STATUS */ 99 return s->ints; 100 101 case 0x18: /* PIN_CONTROL (not in OMAP310) */ 102 OMAP_BAD_REG(addr); 103 return s->pins; 104 } 105 106 OMAP_BAD_REG(addr); 107 return 0; 108 } 109 110 static void omap_gpio_write(void *opaque, hwaddr addr, 111 uint64_t value, unsigned size) 112 { 113 struct omap_gpio_s *s = (struct omap_gpio_s *) opaque; 114 int offset = addr & OMAP_MPUI_REG_MASK; 115 uint16_t diff; 116 int ln; 117 118 if (size != 2) { 119 omap_badwidth_write16(opaque, addr, value); 120 return; 121 } 122 123 switch (offset) { 124 case 0x00: /* DATA_INPUT */ 125 OMAP_RO_REG(addr); 126 return; 127 128 case 0x04: /* DATA_OUTPUT */ 129 diff = (s->outputs ^ value) & ~s->dir; 130 s->outputs = value; 131 while ((ln = ctz32(diff)) != 32) { 132 if (s->handler[ln]) 133 qemu_set_irq(s->handler[ln], (value >> ln) & 1); 134 diff &= ~(1 << ln); 135 } 136 break; 137 138 case 0x08: /* DIRECTION_CONTROL */ 139 diff = s->outputs & (s->dir ^ value); 140 s->dir = value; 141 142 value = s->outputs & ~s->dir; 143 while ((ln = ctz32(diff)) != 32) { 144 if (s->handler[ln]) 145 qemu_set_irq(s->handler[ln], (value >> ln) & 1); 146 diff &= ~(1 << ln); 147 } 148 break; 149 150 case 0x0c: /* INTERRUPT_CONTROL */ 151 s->edge = value; 152 break; 153 154 case 0x10: /* INTERRUPT_MASK */ 155 s->mask = value; 156 break; 157 158 case 0x14: /* INTERRUPT_STATUS */ 159 s->ints &= ~value; 160 if (!s->ints) 161 qemu_irq_lower(s->irq); 162 break; 163 164 case 0x18: /* PIN_CONTROL (not in OMAP310 TRM) */ 165 OMAP_BAD_REG(addr); 166 s->pins = value; 167 break; 168 169 default: 170 OMAP_BAD_REG(addr); 171 return; 172 } 173 } 174 175 /* *Some* sources say the memory region is 32-bit. */ 176 static const MemoryRegionOps omap_gpio_ops = { 177 .read = omap_gpio_read, 178 .write = omap_gpio_write, 179 .endianness = DEVICE_NATIVE_ENDIAN, 180 }; 181 182 static void omap_gpio_reset(struct omap_gpio_s *s) 183 { 184 s->inputs = 0; 185 s->outputs = ~0; 186 s->dir = ~0; 187 s->edge = ~0; 188 s->mask = ~0; 189 s->ints = 0; 190 s->pins = ~0; 191 } 192 193 struct omap2_gpio_s { 194 qemu_irq irq[2]; 195 qemu_irq wkup; 196 qemu_irq *handler; 197 MemoryRegion iomem; 198 199 uint8_t revision; 200 uint8_t config[2]; 201 uint32_t inputs; 202 uint32_t outputs; 203 uint32_t dir; 204 uint32_t level[2]; 205 uint32_t edge[2]; 206 uint32_t mask[2]; 207 uint32_t wumask; 208 uint32_t ints[2]; 209 uint32_t debounce; 210 uint8_t delay; 211 }; 212 213 #define TYPE_OMAP2_GPIO "omap2-gpio" 214 #define OMAP2_GPIO(obj) \ 215 OBJECT_CHECK(struct omap2_gpif_s, (obj), TYPE_OMAP2_GPIO) 216 217 struct omap2_gpif_s { 218 SysBusDevice parent_obj; 219 220 MemoryRegion iomem; 221 int mpu_model; 222 void *iclk; 223 void *fclk[6]; 224 int modulecount; 225 struct omap2_gpio_s *modules; 226 qemu_irq *handler; 227 int autoidle; 228 int gpo; 229 }; 230 231 /* General-Purpose Interface of OMAP2/3 */ 232 static inline void omap2_gpio_module_int_update(struct omap2_gpio_s *s, 233 int line) 234 { 235 qemu_set_irq(s->irq[line], s->ints[line] & s->mask[line]); 236 } 237 238 static void omap2_gpio_module_wake(struct omap2_gpio_s *s, int line) 239 { 240 if (!(s->config[0] & (1 << 2))) /* ENAWAKEUP */ 241 return; 242 if (!(s->config[0] & (3 << 3))) /* Force Idle */ 243 return; 244 if (!(s->wumask & (1 << line))) 245 return; 246 247 qemu_irq_raise(s->wkup); 248 } 249 250 static inline void omap2_gpio_module_out_update(struct omap2_gpio_s *s, 251 uint32_t diff) 252 { 253 int ln; 254 255 s->outputs ^= diff; 256 diff &= ~s->dir; 257 while ((ln = ctz32(diff)) != 32) { 258 qemu_set_irq(s->handler[ln], (s->outputs >> ln) & 1); 259 diff &= ~(1 << ln); 260 } 261 } 262 263 static void omap2_gpio_module_level_update(struct omap2_gpio_s *s, int line) 264 { 265 s->ints[line] |= s->dir & 266 ((s->inputs & s->level[1]) | (~s->inputs & s->level[0])); 267 omap2_gpio_module_int_update(s, line); 268 } 269 270 static inline void omap2_gpio_module_int(struct omap2_gpio_s *s, int line) 271 { 272 s->ints[0] |= 1 << line; 273 omap2_gpio_module_int_update(s, 0); 274 s->ints[1] |= 1 << line; 275 omap2_gpio_module_int_update(s, 1); 276 omap2_gpio_module_wake(s, line); 277 } 278 279 static void omap2_gpio_set(void *opaque, int line, int level) 280 { 281 struct omap2_gpif_s *p = opaque; 282 struct omap2_gpio_s *s = &p->modules[line >> 5]; 283 284 line &= 31; 285 if (level) { 286 if (s->dir & (1 << line) & ((~s->inputs & s->edge[0]) | s->level[1])) 287 omap2_gpio_module_int(s, line); 288 s->inputs |= 1 << line; 289 } else { 290 if (s->dir & (1 << line) & ((s->inputs & s->edge[1]) | s->level[0])) 291 omap2_gpio_module_int(s, line); 292 s->inputs &= ~(1 << line); 293 } 294 } 295 296 static void omap2_gpio_module_reset(struct omap2_gpio_s *s) 297 { 298 s->config[0] = 0; 299 s->config[1] = 2; 300 s->ints[0] = 0; 301 s->ints[1] = 0; 302 s->mask[0] = 0; 303 s->mask[1] = 0; 304 s->wumask = 0; 305 s->dir = ~0; 306 s->level[0] = 0; 307 s->level[1] = 0; 308 s->edge[0] = 0; 309 s->edge[1] = 0; 310 s->debounce = 0; 311 s->delay = 0; 312 } 313 314 static uint32_t omap2_gpio_module_read(void *opaque, hwaddr addr) 315 { 316 struct omap2_gpio_s *s = (struct omap2_gpio_s *) opaque; 317 318 switch (addr) { 319 case 0x00: /* GPIO_REVISION */ 320 return s->revision; 321 322 case 0x10: /* GPIO_SYSCONFIG */ 323 return s->config[0]; 324 325 case 0x14: /* GPIO_SYSSTATUS */ 326 return 0x01; 327 328 case 0x18: /* GPIO_IRQSTATUS1 */ 329 return s->ints[0]; 330 331 case 0x1c: /* GPIO_IRQENABLE1 */ 332 case 0x60: /* GPIO_CLEARIRQENABLE1 */ 333 case 0x64: /* GPIO_SETIRQENABLE1 */ 334 return s->mask[0]; 335 336 case 0x20: /* GPIO_WAKEUPENABLE */ 337 case 0x80: /* GPIO_CLEARWKUENA */ 338 case 0x84: /* GPIO_SETWKUENA */ 339 return s->wumask; 340 341 case 0x28: /* GPIO_IRQSTATUS2 */ 342 return s->ints[1]; 343 344 case 0x2c: /* GPIO_IRQENABLE2 */ 345 case 0x70: /* GPIO_CLEARIRQENABLE2 */ 346 case 0x74: /* GPIO_SETIREQNEABLE2 */ 347 return s->mask[1]; 348 349 case 0x30: /* GPIO_CTRL */ 350 return s->config[1]; 351 352 case 0x34: /* GPIO_OE */ 353 return s->dir; 354 355 case 0x38: /* GPIO_DATAIN */ 356 return s->inputs; 357 358 case 0x3c: /* GPIO_DATAOUT */ 359 case 0x90: /* GPIO_CLEARDATAOUT */ 360 case 0x94: /* GPIO_SETDATAOUT */ 361 return s->outputs; 362 363 case 0x40: /* GPIO_LEVELDETECT0 */ 364 return s->level[0]; 365 366 case 0x44: /* GPIO_LEVELDETECT1 */ 367 return s->level[1]; 368 369 case 0x48: /* GPIO_RISINGDETECT */ 370 return s->edge[0]; 371 372 case 0x4c: /* GPIO_FALLINGDETECT */ 373 return s->edge[1]; 374 375 case 0x50: /* GPIO_DEBOUNCENABLE */ 376 return s->debounce; 377 378 case 0x54: /* GPIO_DEBOUNCINGTIME */ 379 return s->delay; 380 } 381 382 OMAP_BAD_REG(addr); 383 return 0; 384 } 385 386 static void omap2_gpio_module_write(void *opaque, hwaddr addr, 387 uint32_t value) 388 { 389 struct omap2_gpio_s *s = (struct omap2_gpio_s *) opaque; 390 uint32_t diff; 391 int ln; 392 393 switch (addr) { 394 case 0x00: /* GPIO_REVISION */ 395 case 0x14: /* GPIO_SYSSTATUS */ 396 case 0x38: /* GPIO_DATAIN */ 397 OMAP_RO_REG(addr); 398 break; 399 400 case 0x10: /* GPIO_SYSCONFIG */ 401 if (((value >> 3) & 3) == 3) 402 fprintf(stderr, "%s: bad IDLEMODE value\n", __FUNCTION__); 403 if (value & 2) 404 omap2_gpio_module_reset(s); 405 s->config[0] = value & 0x1d; 406 break; 407 408 case 0x18: /* GPIO_IRQSTATUS1 */ 409 if (s->ints[0] & value) { 410 s->ints[0] &= ~value; 411 omap2_gpio_module_level_update(s, 0); 412 } 413 break; 414 415 case 0x1c: /* GPIO_IRQENABLE1 */ 416 s->mask[0] = value; 417 omap2_gpio_module_int_update(s, 0); 418 break; 419 420 case 0x20: /* GPIO_WAKEUPENABLE */ 421 s->wumask = value; 422 break; 423 424 case 0x28: /* GPIO_IRQSTATUS2 */ 425 if (s->ints[1] & value) { 426 s->ints[1] &= ~value; 427 omap2_gpio_module_level_update(s, 1); 428 } 429 break; 430 431 case 0x2c: /* GPIO_IRQENABLE2 */ 432 s->mask[1] = value; 433 omap2_gpio_module_int_update(s, 1); 434 break; 435 436 case 0x30: /* GPIO_CTRL */ 437 s->config[1] = value & 7; 438 break; 439 440 case 0x34: /* GPIO_OE */ 441 diff = s->outputs & (s->dir ^ value); 442 s->dir = value; 443 444 value = s->outputs & ~s->dir; 445 while ((ln = ctz32(diff)) != 32) { 446 diff &= ~(1 << ln); 447 qemu_set_irq(s->handler[ln], (value >> ln) & 1); 448 } 449 450 omap2_gpio_module_level_update(s, 0); 451 omap2_gpio_module_level_update(s, 1); 452 break; 453 454 case 0x3c: /* GPIO_DATAOUT */ 455 omap2_gpio_module_out_update(s, s->outputs ^ value); 456 break; 457 458 case 0x40: /* GPIO_LEVELDETECT0 */ 459 s->level[0] = value; 460 omap2_gpio_module_level_update(s, 0); 461 omap2_gpio_module_level_update(s, 1); 462 break; 463 464 case 0x44: /* GPIO_LEVELDETECT1 */ 465 s->level[1] = value; 466 omap2_gpio_module_level_update(s, 0); 467 omap2_gpio_module_level_update(s, 1); 468 break; 469 470 case 0x48: /* GPIO_RISINGDETECT */ 471 s->edge[0] = value; 472 break; 473 474 case 0x4c: /* GPIO_FALLINGDETECT */ 475 s->edge[1] = value; 476 break; 477 478 case 0x50: /* GPIO_DEBOUNCENABLE */ 479 s->debounce = value; 480 break; 481 482 case 0x54: /* GPIO_DEBOUNCINGTIME */ 483 s->delay = value; 484 break; 485 486 case 0x60: /* GPIO_CLEARIRQENABLE1 */ 487 s->mask[0] &= ~value; 488 omap2_gpio_module_int_update(s, 0); 489 break; 490 491 case 0x64: /* GPIO_SETIRQENABLE1 */ 492 s->mask[0] |= value; 493 omap2_gpio_module_int_update(s, 0); 494 break; 495 496 case 0x70: /* GPIO_CLEARIRQENABLE2 */ 497 s->mask[1] &= ~value; 498 omap2_gpio_module_int_update(s, 1); 499 break; 500 501 case 0x74: /* GPIO_SETIREQNEABLE2 */ 502 s->mask[1] |= value; 503 omap2_gpio_module_int_update(s, 1); 504 break; 505 506 case 0x80: /* GPIO_CLEARWKUENA */ 507 s->wumask &= ~value; 508 break; 509 510 case 0x84: /* GPIO_SETWKUENA */ 511 s->wumask |= value; 512 break; 513 514 case 0x90: /* GPIO_CLEARDATAOUT */ 515 omap2_gpio_module_out_update(s, s->outputs & value); 516 break; 517 518 case 0x94: /* GPIO_SETDATAOUT */ 519 omap2_gpio_module_out_update(s, ~s->outputs & value); 520 break; 521 522 default: 523 OMAP_BAD_REG(addr); 524 return; 525 } 526 } 527 528 static uint32_t omap2_gpio_module_readp(void *opaque, hwaddr addr) 529 { 530 return omap2_gpio_module_read(opaque, addr & ~3) >> ((addr & 3) << 3); 531 } 532 533 static void omap2_gpio_module_writep(void *opaque, hwaddr addr, 534 uint32_t value) 535 { 536 uint32_t cur = 0; 537 uint32_t mask = 0xffff; 538 539 switch (addr & ~3) { 540 case 0x00: /* GPIO_REVISION */ 541 case 0x14: /* GPIO_SYSSTATUS */ 542 case 0x38: /* GPIO_DATAIN */ 543 OMAP_RO_REG(addr); 544 break; 545 546 case 0x10: /* GPIO_SYSCONFIG */ 547 case 0x1c: /* GPIO_IRQENABLE1 */ 548 case 0x20: /* GPIO_WAKEUPENABLE */ 549 case 0x2c: /* GPIO_IRQENABLE2 */ 550 case 0x30: /* GPIO_CTRL */ 551 case 0x34: /* GPIO_OE */ 552 case 0x3c: /* GPIO_DATAOUT */ 553 case 0x40: /* GPIO_LEVELDETECT0 */ 554 case 0x44: /* GPIO_LEVELDETECT1 */ 555 case 0x48: /* GPIO_RISINGDETECT */ 556 case 0x4c: /* GPIO_FALLINGDETECT */ 557 case 0x50: /* GPIO_DEBOUNCENABLE */ 558 case 0x54: /* GPIO_DEBOUNCINGTIME */ 559 cur = omap2_gpio_module_read(opaque, addr & ~3) & 560 ~(mask << ((addr & 3) << 3)); 561 562 /* Fall through. */ 563 case 0x18: /* GPIO_IRQSTATUS1 */ 564 case 0x28: /* GPIO_IRQSTATUS2 */ 565 case 0x60: /* GPIO_CLEARIRQENABLE1 */ 566 case 0x64: /* GPIO_SETIRQENABLE1 */ 567 case 0x70: /* GPIO_CLEARIRQENABLE2 */ 568 case 0x74: /* GPIO_SETIREQNEABLE2 */ 569 case 0x80: /* GPIO_CLEARWKUENA */ 570 case 0x84: /* GPIO_SETWKUENA */ 571 case 0x90: /* GPIO_CLEARDATAOUT */ 572 case 0x94: /* GPIO_SETDATAOUT */ 573 value <<= (addr & 3) << 3; 574 omap2_gpio_module_write(opaque, addr, cur | value); 575 break; 576 577 default: 578 OMAP_BAD_REG(addr); 579 return; 580 } 581 } 582 583 static const MemoryRegionOps omap2_gpio_module_ops = { 584 .old_mmio = { 585 .read = { 586 omap2_gpio_module_readp, 587 omap2_gpio_module_readp, 588 omap2_gpio_module_read, 589 }, 590 .write = { 591 omap2_gpio_module_writep, 592 omap2_gpio_module_writep, 593 omap2_gpio_module_write, 594 }, 595 }, 596 .endianness = DEVICE_NATIVE_ENDIAN, 597 }; 598 599 static void omap_gpif_reset(DeviceState *dev) 600 { 601 struct omap_gpif_s *s = OMAP1_GPIO(dev); 602 603 omap_gpio_reset(&s->omap1); 604 } 605 606 static void omap2_gpif_reset(DeviceState *dev) 607 { 608 struct omap2_gpif_s *s = OMAP2_GPIO(dev); 609 int i; 610 611 for (i = 0; i < s->modulecount; i++) { 612 omap2_gpio_module_reset(&s->modules[i]); 613 } 614 s->autoidle = 0; 615 s->gpo = 0; 616 } 617 618 static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr, 619 unsigned size) 620 { 621 struct omap2_gpif_s *s = (struct omap2_gpif_s *) opaque; 622 623 switch (addr) { 624 case 0x00: /* IPGENERICOCPSPL_REVISION */ 625 return 0x18; 626 627 case 0x10: /* IPGENERICOCPSPL_SYSCONFIG */ 628 return s->autoidle; 629 630 case 0x14: /* IPGENERICOCPSPL_SYSSTATUS */ 631 return 0x01; 632 633 case 0x18: /* IPGENERICOCPSPL_IRQSTATUS */ 634 return 0x00; 635 636 case 0x40: /* IPGENERICOCPSPL_GPO */ 637 return s->gpo; 638 639 case 0x50: /* IPGENERICOCPSPL_GPI */ 640 return 0x00; 641 } 642 643 OMAP_BAD_REG(addr); 644 return 0; 645 } 646 647 static void omap2_gpif_top_write(void *opaque, hwaddr addr, 648 uint64_t value, unsigned size) 649 { 650 struct omap2_gpif_s *s = (struct omap2_gpif_s *) opaque; 651 652 switch (addr) { 653 case 0x00: /* IPGENERICOCPSPL_REVISION */ 654 case 0x14: /* IPGENERICOCPSPL_SYSSTATUS */ 655 case 0x18: /* IPGENERICOCPSPL_IRQSTATUS */ 656 case 0x50: /* IPGENERICOCPSPL_GPI */ 657 OMAP_RO_REG(addr); 658 break; 659 660 case 0x10: /* IPGENERICOCPSPL_SYSCONFIG */ 661 if (value & (1 << 1)) /* SOFTRESET */ 662 omap2_gpif_reset(DEVICE(s)); 663 s->autoidle = value & 1; 664 break; 665 666 case 0x40: /* IPGENERICOCPSPL_GPO */ 667 s->gpo = value & 1; 668 break; 669 670 default: 671 OMAP_BAD_REG(addr); 672 return; 673 } 674 } 675 676 static const MemoryRegionOps omap2_gpif_top_ops = { 677 .read = omap2_gpif_top_read, 678 .write = omap2_gpif_top_write, 679 .endianness = DEVICE_NATIVE_ENDIAN, 680 }; 681 682 static void omap_gpio_init(Object *obj) 683 { 684 DeviceState *dev = DEVICE(obj); 685 struct omap_gpif_s *s = OMAP1_GPIO(obj); 686 SysBusDevice *sbd = SYS_BUS_DEVICE(obj); 687 688 qdev_init_gpio_in(dev, omap_gpio_set, 16); 689 qdev_init_gpio_out(dev, s->omap1.handler, 16); 690 sysbus_init_irq(sbd, &s->omap1.irq); 691 memory_region_init_io(&s->iomem, obj, &omap_gpio_ops, &s->omap1, 692 "omap.gpio", 0x1000); 693 sysbus_init_mmio(sbd, &s->iomem); 694 } 695 696 static void omap_gpio_realize(DeviceState *dev, Error **errp) 697 { 698 struct omap_gpif_s *s = OMAP1_GPIO(dev); 699 700 if (!s->clk) { 701 error_setg(errp, "omap-gpio: clk not connected"); 702 } 703 } 704 705 static void omap2_gpio_realize(DeviceState *dev, Error **errp) 706 { 707 struct omap2_gpif_s *s = OMAP2_GPIO(dev); 708 SysBusDevice *sbd = SYS_BUS_DEVICE(dev); 709 int i; 710 711 if (!s->iclk) { 712 error_setg(errp, "omap2-gpio: iclk not connected"); 713 return; 714 } 715 716 s->modulecount = s->mpu_model < omap2430 ? 4 717 : s->mpu_model < omap3430 ? 5 718 : 6; 719 720 if (s->mpu_model < omap3430) { 721 memory_region_init_io(&s->iomem, OBJECT(dev), &omap2_gpif_top_ops, s, 722 "omap2.gpio", 0x1000); 723 sysbus_init_mmio(sbd, &s->iomem); 724 } 725 726 s->modules = g_new0(struct omap2_gpio_s, s->modulecount); 727 s->handler = g_new0(qemu_irq, s->modulecount * 32); 728 qdev_init_gpio_in(dev, omap2_gpio_set, s->modulecount * 32); 729 qdev_init_gpio_out(dev, s->handler, s->modulecount * 32); 730 731 for (i = 0; i < s->modulecount; i++) { 732 struct omap2_gpio_s *m = &s->modules[i]; 733 734 if (!s->fclk[i]) { 735 error_setg(errp, "omap2-gpio: fclk%d not connected", i); 736 return; 737 } 738 739 m->revision = (s->mpu_model < omap3430) ? 0x18 : 0x25; 740 m->handler = &s->handler[i * 32]; 741 sysbus_init_irq(sbd, &m->irq[0]); /* mpu irq */ 742 sysbus_init_irq(sbd, &m->irq[1]); /* dsp irq */ 743 sysbus_init_irq(sbd, &m->wkup); 744 memory_region_init_io(&m->iomem, OBJECT(dev), &omap2_gpio_module_ops, m, 745 "omap.gpio-module", 0x1000); 746 sysbus_init_mmio(sbd, &m->iomem); 747 } 748 } 749 750 /* Using qdev pointer properties for the clocks is not ideal. 751 * qdev should support a generic means of defining a 'port' with 752 * an arbitrary interface for connecting two devices. Then we 753 * could reframe the omap clock API in terms of clock ports, 754 * and get some type safety. For now the best qdev provides is 755 * passing an arbitrary pointer. 756 * (It's not possible to pass in the string which is the clock 757 * name, because this device does not have the necessary information 758 * (ie the struct omap_mpu_state_s*) to do the clockname to pointer 759 * translation.) 760 */ 761 762 static Property omap_gpio_properties[] = { 763 DEFINE_PROP_INT32("mpu_model", struct omap_gpif_s, mpu_model, 0), 764 DEFINE_PROP_PTR("clk", struct omap_gpif_s, clk), 765 DEFINE_PROP_END_OF_LIST(), 766 }; 767 768 static void omap_gpio_class_init(ObjectClass *klass, void *data) 769 { 770 DeviceClass *dc = DEVICE_CLASS(klass); 771 772 dc->realize = omap_gpio_realize; 773 dc->reset = omap_gpif_reset; 774 dc->props = omap_gpio_properties; 775 /* Reason: pointer property "clk" */ 776 dc->user_creatable = false; 777 } 778 779 static const TypeInfo omap_gpio_info = { 780 .name = TYPE_OMAP1_GPIO, 781 .parent = TYPE_SYS_BUS_DEVICE, 782 .instance_size = sizeof(struct omap_gpif_s), 783 .instance_init = omap_gpio_init, 784 .class_init = omap_gpio_class_init, 785 }; 786 787 static Property omap2_gpio_properties[] = { 788 DEFINE_PROP_INT32("mpu_model", struct omap2_gpif_s, mpu_model, 0), 789 DEFINE_PROP_PTR("iclk", struct omap2_gpif_s, iclk), 790 DEFINE_PROP_PTR("fclk0", struct omap2_gpif_s, fclk[0]), 791 DEFINE_PROP_PTR("fclk1", struct omap2_gpif_s, fclk[1]), 792 DEFINE_PROP_PTR("fclk2", struct omap2_gpif_s, fclk[2]), 793 DEFINE_PROP_PTR("fclk3", struct omap2_gpif_s, fclk[3]), 794 DEFINE_PROP_PTR("fclk4", struct omap2_gpif_s, fclk[4]), 795 DEFINE_PROP_PTR("fclk5", struct omap2_gpif_s, fclk[5]), 796 DEFINE_PROP_END_OF_LIST(), 797 }; 798 799 static void omap2_gpio_class_init(ObjectClass *klass, void *data) 800 { 801 DeviceClass *dc = DEVICE_CLASS(klass); 802 803 dc->realize = omap2_gpio_realize; 804 dc->reset = omap2_gpif_reset; 805 dc->props = omap2_gpio_properties; 806 /* Reason: pointer properties "iclk", "fclk0", ..., "fclk5" */ 807 dc->user_creatable = false; 808 } 809 810 static const TypeInfo omap2_gpio_info = { 811 .name = TYPE_OMAP2_GPIO, 812 .parent = TYPE_SYS_BUS_DEVICE, 813 .instance_size = sizeof(struct omap2_gpif_s), 814 .class_init = omap2_gpio_class_init, 815 }; 816 817 static void omap_gpio_register_types(void) 818 { 819 type_register_static(&omap_gpio_info); 820 type_register_static(&omap2_gpio_info); 821 } 822 823 type_init(omap_gpio_register_types) 824