xref: /openbmc/qemu/hw/gpio/omap_gpio.c (revision 764a6ee9)
1 /*
2  * TI OMAP processors GPIO emulation.
3  *
4  * Copyright (C) 2006-2008 Andrzej Zaborowski  <balrog@zabor.org>
5  * Copyright (C) 2007-2009 Nokia Corporation
6  *
7  * This program is free software; you can redistribute it and/or
8  * modify it under the terms of the GNU General Public License as
9  * published by the Free Software Foundation; either version 2 or
10  * (at your option) version 3 of the License.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15  * GNU General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License along
18  * with this program; if not, see <http://www.gnu.org/licenses/>.
19  */
20 
21 #include "qemu/osdep.h"
22 #include "qemu/log.h"
23 #include "hw/irq.h"
24 #include "hw/qdev-properties.h"
25 #include "hw/arm/omap.h"
26 #include "hw/sysbus.h"
27 #include "qemu/error-report.h"
28 #include "qemu/module.h"
29 #include "qapi/error.h"
30 
31 struct omap_gpio_s {
32     qemu_irq irq;
33     qemu_irq handler[16];
34 
35     uint16_t inputs;
36     uint16_t outputs;
37     uint16_t dir;
38     uint16_t edge;
39     uint16_t mask;
40     uint16_t ints;
41     uint16_t pins;
42 };
43 
44 struct Omap1GpioState {
45     SysBusDevice parent_obj;
46 
47     MemoryRegion iomem;
48     int mpu_model;
49     void *clk;
50     struct omap_gpio_s omap1;
51 };
52 
53 /* General-Purpose I/O of OMAP1 */
54 static void omap_gpio_set(void *opaque, int line, int level)
55 {
56     Omap1GpioState *p = opaque;
57     struct omap_gpio_s *s = &p->omap1;
58     uint16_t prev = s->inputs;
59 
60     if (level)
61         s->inputs |= 1 << line;
62     else
63         s->inputs &= ~(1 << line);
64 
65     if (((s->edge & s->inputs & ~prev) | (~s->edge & ~s->inputs & prev)) &
66                     (1 << line) & s->dir & ~s->mask) {
67         s->ints |= 1 << line;
68         qemu_irq_raise(s->irq);
69     }
70 }
71 
72 static uint64_t omap_gpio_read(void *opaque, hwaddr addr,
73                                unsigned size)
74 {
75     struct omap_gpio_s *s = opaque;
76     int offset = addr & OMAP_MPUI_REG_MASK;
77 
78     if (size != 2) {
79         return omap_badwidth_read16(opaque, addr);
80     }
81 
82     switch (offset) {
83     case 0x00:	/* DATA_INPUT */
84         return s->inputs & s->pins;
85 
86     case 0x04:	/* DATA_OUTPUT */
87         return s->outputs;
88 
89     case 0x08:	/* DIRECTION_CONTROL */
90         return s->dir;
91 
92     case 0x0c:	/* INTERRUPT_CONTROL */
93         return s->edge;
94 
95     case 0x10:	/* INTERRUPT_MASK */
96         return s->mask;
97 
98     case 0x14:	/* INTERRUPT_STATUS */
99         return s->ints;
100 
101     case 0x18:	/* PIN_CONTROL (not in OMAP310) */
102         OMAP_BAD_REG(addr);
103         return s->pins;
104     }
105 
106     OMAP_BAD_REG(addr);
107     return 0;
108 }
109 
110 static void omap_gpio_write(void *opaque, hwaddr addr,
111                             uint64_t value, unsigned size)
112 {
113     struct omap_gpio_s *s = opaque;
114     int offset = addr & OMAP_MPUI_REG_MASK;
115     uint16_t diff;
116     int ln;
117 
118     if (size != 2) {
119         omap_badwidth_write16(opaque, addr, value);
120         return;
121     }
122 
123     switch (offset) {
124     case 0x00:	/* DATA_INPUT */
125         OMAP_RO_REG(addr);
126         return;
127 
128     case 0x04:	/* DATA_OUTPUT */
129         diff = (s->outputs ^ value) & ~s->dir;
130         s->outputs = value;
131         while ((ln = ctz32(diff)) != 32) {
132             if (s->handler[ln])
133                 qemu_set_irq(s->handler[ln], (value >> ln) & 1);
134             diff &= ~(1 << ln);
135         }
136         break;
137 
138     case 0x08:	/* DIRECTION_CONTROL */
139         diff = s->outputs & (s->dir ^ value);
140         s->dir = value;
141 
142         value = s->outputs & ~s->dir;
143         while ((ln = ctz32(diff)) != 32) {
144             if (s->handler[ln])
145                 qemu_set_irq(s->handler[ln], (value >> ln) & 1);
146             diff &= ~(1 << ln);
147         }
148         break;
149 
150     case 0x0c:	/* INTERRUPT_CONTROL */
151         s->edge = value;
152         break;
153 
154     case 0x10:	/* INTERRUPT_MASK */
155         s->mask = value;
156         break;
157 
158     case 0x14:	/* INTERRUPT_STATUS */
159         s->ints &= ~value;
160         if (!s->ints)
161             qemu_irq_lower(s->irq);
162         break;
163 
164     case 0x18:	/* PIN_CONTROL (not in OMAP310 TRM) */
165         OMAP_BAD_REG(addr);
166         s->pins = value;
167         break;
168 
169     default:
170         OMAP_BAD_REG(addr);
171         return;
172     }
173 }
174 
175 /* *Some* sources say the memory region is 32-bit.  */
176 static const MemoryRegionOps omap_gpio_ops = {
177     .read = omap_gpio_read,
178     .write = omap_gpio_write,
179     .endianness = DEVICE_NATIVE_ENDIAN,
180 };
181 
182 static void omap_gpio_reset(struct omap_gpio_s *s)
183 {
184     s->inputs = 0;
185     s->outputs = ~0;
186     s->dir = ~0;
187     s->edge = ~0;
188     s->mask = ~0;
189     s->ints = 0;
190     s->pins = ~0;
191 }
192 
193 static void omap_gpif_reset(DeviceState *dev)
194 {
195     Omap1GpioState *s = OMAP1_GPIO(dev);
196 
197     omap_gpio_reset(&s->omap1);
198 }
199 
200 static void omap_gpio_init(Object *obj)
201 {
202     DeviceState *dev = DEVICE(obj);
203     Omap1GpioState *s = OMAP1_GPIO(obj);
204     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
205 
206     qdev_init_gpio_in(dev, omap_gpio_set, 16);
207     qdev_init_gpio_out(dev, s->omap1.handler, 16);
208     sysbus_init_irq(sbd, &s->omap1.irq);
209     memory_region_init_io(&s->iomem, obj, &omap_gpio_ops, &s->omap1,
210                           "omap.gpio", 0x1000);
211     sysbus_init_mmio(sbd, &s->iomem);
212 }
213 
214 static void omap_gpio_realize(DeviceState *dev, Error **errp)
215 {
216     Omap1GpioState *s = OMAP1_GPIO(dev);
217 
218     if (!s->clk) {
219         error_setg(errp, "omap-gpio: clk not connected");
220     }
221 }
222 
223 void omap_gpio_set_clk(Omap1GpioState *gpio, omap_clk clk)
224 {
225     gpio->clk = clk;
226 }
227 
228 static Property omap_gpio_properties[] = {
229     DEFINE_PROP_INT32("mpu_model", Omap1GpioState, mpu_model, 0),
230     DEFINE_PROP_END_OF_LIST(),
231 };
232 
233 static void omap_gpio_class_init(ObjectClass *klass, void *data)
234 {
235     DeviceClass *dc = DEVICE_CLASS(klass);
236 
237     dc->realize = omap_gpio_realize;
238     device_class_set_legacy_reset(dc, omap_gpif_reset);
239     device_class_set_props(dc, omap_gpio_properties);
240     /* Reason: pointer property "clk" */
241     dc->user_creatable = false;
242 }
243 
244 static const TypeInfo omap_gpio_info = {
245     .name          = TYPE_OMAP1_GPIO,
246     .parent        = TYPE_SYS_BUS_DEVICE,
247     .instance_size = sizeof(Omap1GpioState),
248     .instance_init = omap_gpio_init,
249     .class_init    = omap_gpio_class_init,
250 };
251 
252 static void omap_gpio_register_types(void)
253 {
254     type_register_static(&omap_gpio_info);
255 }
256 
257 type_init(omap_gpio_register_types)
258