1 /* 2 * TI OMAP processors GPIO emulation. 3 * 4 * Copyright (C) 2006-2008 Andrzej Zaborowski <balrog@zabor.org> 5 * Copyright (C) 2007-2009 Nokia Corporation 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 or 10 * (at your option) version 3 of the License. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License along 18 * with this program; if not, see <http://www.gnu.org/licenses/>. 19 */ 20 21 #include "hw/hw.h" 22 #include "hw/arm/omap.h" 23 #include "hw/sysbus.h" 24 25 struct omap_gpio_s { 26 qemu_irq irq; 27 qemu_irq handler[16]; 28 29 uint16_t inputs; 30 uint16_t outputs; 31 uint16_t dir; 32 uint16_t edge; 33 uint16_t mask; 34 uint16_t ints; 35 uint16_t pins; 36 }; 37 38 #define TYPE_OMAP1_GPIO "omap-gpio" 39 #define OMAP1_GPIO(obj) \ 40 OBJECT_CHECK(struct omap_gpif_s, (obj), TYPE_OMAP1_GPIO) 41 42 struct omap_gpif_s { 43 SysBusDevice parent_obj; 44 45 MemoryRegion iomem; 46 int mpu_model; 47 void *clk; 48 struct omap_gpio_s omap1; 49 }; 50 51 /* General-Purpose I/O of OMAP1 */ 52 static void omap_gpio_set(void *opaque, int line, int level) 53 { 54 struct omap_gpio_s *s = &((struct omap_gpif_s *) opaque)->omap1; 55 uint16_t prev = s->inputs; 56 57 if (level) 58 s->inputs |= 1 << line; 59 else 60 s->inputs &= ~(1 << line); 61 62 if (((s->edge & s->inputs & ~prev) | (~s->edge & ~s->inputs & prev)) & 63 (1 << line) & s->dir & ~s->mask) { 64 s->ints |= 1 << line; 65 qemu_irq_raise(s->irq); 66 } 67 } 68 69 static uint64_t omap_gpio_read(void *opaque, hwaddr addr, 70 unsigned size) 71 { 72 struct omap_gpio_s *s = (struct omap_gpio_s *) opaque; 73 int offset = addr & OMAP_MPUI_REG_MASK; 74 75 if (size != 2) { 76 return omap_badwidth_read16(opaque, addr); 77 } 78 79 switch (offset) { 80 case 0x00: /* DATA_INPUT */ 81 return s->inputs & s->pins; 82 83 case 0x04: /* DATA_OUTPUT */ 84 return s->outputs; 85 86 case 0x08: /* DIRECTION_CONTROL */ 87 return s->dir; 88 89 case 0x0c: /* INTERRUPT_CONTROL */ 90 return s->edge; 91 92 case 0x10: /* INTERRUPT_MASK */ 93 return s->mask; 94 95 case 0x14: /* INTERRUPT_STATUS */ 96 return s->ints; 97 98 case 0x18: /* PIN_CONTROL (not in OMAP310) */ 99 OMAP_BAD_REG(addr); 100 return s->pins; 101 } 102 103 OMAP_BAD_REG(addr); 104 return 0; 105 } 106 107 static void omap_gpio_write(void *opaque, hwaddr addr, 108 uint64_t value, unsigned size) 109 { 110 struct omap_gpio_s *s = (struct omap_gpio_s *) opaque; 111 int offset = addr & OMAP_MPUI_REG_MASK; 112 uint16_t diff; 113 int ln; 114 115 if (size != 2) { 116 return omap_badwidth_write16(opaque, addr, value); 117 } 118 119 switch (offset) { 120 case 0x00: /* DATA_INPUT */ 121 OMAP_RO_REG(addr); 122 return; 123 124 case 0x04: /* DATA_OUTPUT */ 125 diff = (s->outputs ^ value) & ~s->dir; 126 s->outputs = value; 127 while ((ln = ffs(diff))) { 128 ln --; 129 if (s->handler[ln]) 130 qemu_set_irq(s->handler[ln], (value >> ln) & 1); 131 diff &= ~(1 << ln); 132 } 133 break; 134 135 case 0x08: /* DIRECTION_CONTROL */ 136 diff = s->outputs & (s->dir ^ value); 137 s->dir = value; 138 139 value = s->outputs & ~s->dir; 140 while ((ln = ffs(diff))) { 141 ln --; 142 if (s->handler[ln]) 143 qemu_set_irq(s->handler[ln], (value >> ln) & 1); 144 diff &= ~(1 << ln); 145 } 146 break; 147 148 case 0x0c: /* INTERRUPT_CONTROL */ 149 s->edge = value; 150 break; 151 152 case 0x10: /* INTERRUPT_MASK */ 153 s->mask = value; 154 break; 155 156 case 0x14: /* INTERRUPT_STATUS */ 157 s->ints &= ~value; 158 if (!s->ints) 159 qemu_irq_lower(s->irq); 160 break; 161 162 case 0x18: /* PIN_CONTROL (not in OMAP310 TRM) */ 163 OMAP_BAD_REG(addr); 164 s->pins = value; 165 break; 166 167 default: 168 OMAP_BAD_REG(addr); 169 return; 170 } 171 } 172 173 /* *Some* sources say the memory region is 32-bit. */ 174 static const MemoryRegionOps omap_gpio_ops = { 175 .read = omap_gpio_read, 176 .write = omap_gpio_write, 177 .endianness = DEVICE_NATIVE_ENDIAN, 178 }; 179 180 static void omap_gpio_reset(struct omap_gpio_s *s) 181 { 182 s->inputs = 0; 183 s->outputs = ~0; 184 s->dir = ~0; 185 s->edge = ~0; 186 s->mask = ~0; 187 s->ints = 0; 188 s->pins = ~0; 189 } 190 191 struct omap2_gpio_s { 192 qemu_irq irq[2]; 193 qemu_irq wkup; 194 qemu_irq *handler; 195 MemoryRegion iomem; 196 197 uint8_t revision; 198 uint8_t config[2]; 199 uint32_t inputs; 200 uint32_t outputs; 201 uint32_t dir; 202 uint32_t level[2]; 203 uint32_t edge[2]; 204 uint32_t mask[2]; 205 uint32_t wumask; 206 uint32_t ints[2]; 207 uint32_t debounce; 208 uint8_t delay; 209 }; 210 211 #define TYPE_OMAP2_GPIO "omap2-gpio" 212 #define OMAP2_GPIO(obj) \ 213 OBJECT_CHECK(struct omap2_gpif_s, (obj), TYPE_OMAP2_GPIO) 214 215 struct omap2_gpif_s { 216 SysBusDevice parent_obj; 217 218 MemoryRegion iomem; 219 int mpu_model; 220 void *iclk; 221 void *fclk[6]; 222 int modulecount; 223 struct omap2_gpio_s *modules; 224 qemu_irq *handler; 225 int autoidle; 226 int gpo; 227 }; 228 229 /* General-Purpose Interface of OMAP2/3 */ 230 static inline void omap2_gpio_module_int_update(struct omap2_gpio_s *s, 231 int line) 232 { 233 qemu_set_irq(s->irq[line], s->ints[line] & s->mask[line]); 234 } 235 236 static void omap2_gpio_module_wake(struct omap2_gpio_s *s, int line) 237 { 238 if (!(s->config[0] & (1 << 2))) /* ENAWAKEUP */ 239 return; 240 if (!(s->config[0] & (3 << 3))) /* Force Idle */ 241 return; 242 if (!(s->wumask & (1 << line))) 243 return; 244 245 qemu_irq_raise(s->wkup); 246 } 247 248 static inline void omap2_gpio_module_out_update(struct omap2_gpio_s *s, 249 uint32_t diff) 250 { 251 int ln; 252 253 s->outputs ^= diff; 254 diff &= ~s->dir; 255 while ((ln = ffs(diff))) { 256 ln --; 257 qemu_set_irq(s->handler[ln], (s->outputs >> ln) & 1); 258 diff &= ~(1 << ln); 259 } 260 } 261 262 static void omap2_gpio_module_level_update(struct omap2_gpio_s *s, int line) 263 { 264 s->ints[line] |= s->dir & 265 ((s->inputs & s->level[1]) | (~s->inputs & s->level[0])); 266 omap2_gpio_module_int_update(s, line); 267 } 268 269 static inline void omap2_gpio_module_int(struct omap2_gpio_s *s, int line) 270 { 271 s->ints[0] |= 1 << line; 272 omap2_gpio_module_int_update(s, 0); 273 s->ints[1] |= 1 << line; 274 omap2_gpio_module_int_update(s, 1); 275 omap2_gpio_module_wake(s, line); 276 } 277 278 static void omap2_gpio_set(void *opaque, int line, int level) 279 { 280 struct omap2_gpif_s *p = opaque; 281 struct omap2_gpio_s *s = &p->modules[line >> 5]; 282 283 line &= 31; 284 if (level) { 285 if (s->dir & (1 << line) & ((~s->inputs & s->edge[0]) | s->level[1])) 286 omap2_gpio_module_int(s, line); 287 s->inputs |= 1 << line; 288 } else { 289 if (s->dir & (1 << line) & ((s->inputs & s->edge[1]) | s->level[0])) 290 omap2_gpio_module_int(s, line); 291 s->inputs &= ~(1 << line); 292 } 293 } 294 295 static void omap2_gpio_module_reset(struct omap2_gpio_s *s) 296 { 297 s->config[0] = 0; 298 s->config[1] = 2; 299 s->ints[0] = 0; 300 s->ints[1] = 0; 301 s->mask[0] = 0; 302 s->mask[1] = 0; 303 s->wumask = 0; 304 s->dir = ~0; 305 s->level[0] = 0; 306 s->level[1] = 0; 307 s->edge[0] = 0; 308 s->edge[1] = 0; 309 s->debounce = 0; 310 s->delay = 0; 311 } 312 313 static uint32_t omap2_gpio_module_read(void *opaque, hwaddr addr) 314 { 315 struct omap2_gpio_s *s = (struct omap2_gpio_s *) opaque; 316 317 switch (addr) { 318 case 0x00: /* GPIO_REVISION */ 319 return s->revision; 320 321 case 0x10: /* GPIO_SYSCONFIG */ 322 return s->config[0]; 323 324 case 0x14: /* GPIO_SYSSTATUS */ 325 return 0x01; 326 327 case 0x18: /* GPIO_IRQSTATUS1 */ 328 return s->ints[0]; 329 330 case 0x1c: /* GPIO_IRQENABLE1 */ 331 case 0x60: /* GPIO_CLEARIRQENABLE1 */ 332 case 0x64: /* GPIO_SETIRQENABLE1 */ 333 return s->mask[0]; 334 335 case 0x20: /* GPIO_WAKEUPENABLE */ 336 case 0x80: /* GPIO_CLEARWKUENA */ 337 case 0x84: /* GPIO_SETWKUENA */ 338 return s->wumask; 339 340 case 0x28: /* GPIO_IRQSTATUS2 */ 341 return s->ints[1]; 342 343 case 0x2c: /* GPIO_IRQENABLE2 */ 344 case 0x70: /* GPIO_CLEARIRQENABLE2 */ 345 case 0x74: /* GPIO_SETIREQNEABLE2 */ 346 return s->mask[1]; 347 348 case 0x30: /* GPIO_CTRL */ 349 return s->config[1]; 350 351 case 0x34: /* GPIO_OE */ 352 return s->dir; 353 354 case 0x38: /* GPIO_DATAIN */ 355 return s->inputs; 356 357 case 0x3c: /* GPIO_DATAOUT */ 358 case 0x90: /* GPIO_CLEARDATAOUT */ 359 case 0x94: /* GPIO_SETDATAOUT */ 360 return s->outputs; 361 362 case 0x40: /* GPIO_LEVELDETECT0 */ 363 return s->level[0]; 364 365 case 0x44: /* GPIO_LEVELDETECT1 */ 366 return s->level[1]; 367 368 case 0x48: /* GPIO_RISINGDETECT */ 369 return s->edge[0]; 370 371 case 0x4c: /* GPIO_FALLINGDETECT */ 372 return s->edge[1]; 373 374 case 0x50: /* GPIO_DEBOUNCENABLE */ 375 return s->debounce; 376 377 case 0x54: /* GPIO_DEBOUNCINGTIME */ 378 return s->delay; 379 } 380 381 OMAP_BAD_REG(addr); 382 return 0; 383 } 384 385 static void omap2_gpio_module_write(void *opaque, hwaddr addr, 386 uint32_t value) 387 { 388 struct omap2_gpio_s *s = (struct omap2_gpio_s *) opaque; 389 uint32_t diff; 390 int ln; 391 392 switch (addr) { 393 case 0x00: /* GPIO_REVISION */ 394 case 0x14: /* GPIO_SYSSTATUS */ 395 case 0x38: /* GPIO_DATAIN */ 396 OMAP_RO_REG(addr); 397 break; 398 399 case 0x10: /* GPIO_SYSCONFIG */ 400 if (((value >> 3) & 3) == 3) 401 fprintf(stderr, "%s: bad IDLEMODE value\n", __FUNCTION__); 402 if (value & 2) 403 omap2_gpio_module_reset(s); 404 s->config[0] = value & 0x1d; 405 break; 406 407 case 0x18: /* GPIO_IRQSTATUS1 */ 408 if (s->ints[0] & value) { 409 s->ints[0] &= ~value; 410 omap2_gpio_module_level_update(s, 0); 411 } 412 break; 413 414 case 0x1c: /* GPIO_IRQENABLE1 */ 415 s->mask[0] = value; 416 omap2_gpio_module_int_update(s, 0); 417 break; 418 419 case 0x20: /* GPIO_WAKEUPENABLE */ 420 s->wumask = value; 421 break; 422 423 case 0x28: /* GPIO_IRQSTATUS2 */ 424 if (s->ints[1] & value) { 425 s->ints[1] &= ~value; 426 omap2_gpio_module_level_update(s, 1); 427 } 428 break; 429 430 case 0x2c: /* GPIO_IRQENABLE2 */ 431 s->mask[1] = value; 432 omap2_gpio_module_int_update(s, 1); 433 break; 434 435 case 0x30: /* GPIO_CTRL */ 436 s->config[1] = value & 7; 437 break; 438 439 case 0x34: /* GPIO_OE */ 440 diff = s->outputs & (s->dir ^ value); 441 s->dir = value; 442 443 value = s->outputs & ~s->dir; 444 while ((ln = ffs(diff))) { 445 diff &= ~(1 <<-- ln); 446 qemu_set_irq(s->handler[ln], (value >> ln) & 1); 447 } 448 449 omap2_gpio_module_level_update(s, 0); 450 omap2_gpio_module_level_update(s, 1); 451 break; 452 453 case 0x3c: /* GPIO_DATAOUT */ 454 omap2_gpio_module_out_update(s, s->outputs ^ value); 455 break; 456 457 case 0x40: /* GPIO_LEVELDETECT0 */ 458 s->level[0] = value; 459 omap2_gpio_module_level_update(s, 0); 460 omap2_gpio_module_level_update(s, 1); 461 break; 462 463 case 0x44: /* GPIO_LEVELDETECT1 */ 464 s->level[1] = value; 465 omap2_gpio_module_level_update(s, 0); 466 omap2_gpio_module_level_update(s, 1); 467 break; 468 469 case 0x48: /* GPIO_RISINGDETECT */ 470 s->edge[0] = value; 471 break; 472 473 case 0x4c: /* GPIO_FALLINGDETECT */ 474 s->edge[1] = value; 475 break; 476 477 case 0x50: /* GPIO_DEBOUNCENABLE */ 478 s->debounce = value; 479 break; 480 481 case 0x54: /* GPIO_DEBOUNCINGTIME */ 482 s->delay = value; 483 break; 484 485 case 0x60: /* GPIO_CLEARIRQENABLE1 */ 486 s->mask[0] &= ~value; 487 omap2_gpio_module_int_update(s, 0); 488 break; 489 490 case 0x64: /* GPIO_SETIRQENABLE1 */ 491 s->mask[0] |= value; 492 omap2_gpio_module_int_update(s, 0); 493 break; 494 495 case 0x70: /* GPIO_CLEARIRQENABLE2 */ 496 s->mask[1] &= ~value; 497 omap2_gpio_module_int_update(s, 1); 498 break; 499 500 case 0x74: /* GPIO_SETIREQNEABLE2 */ 501 s->mask[1] |= value; 502 omap2_gpio_module_int_update(s, 1); 503 break; 504 505 case 0x80: /* GPIO_CLEARWKUENA */ 506 s->wumask &= ~value; 507 break; 508 509 case 0x84: /* GPIO_SETWKUENA */ 510 s->wumask |= value; 511 break; 512 513 case 0x90: /* GPIO_CLEARDATAOUT */ 514 omap2_gpio_module_out_update(s, s->outputs & value); 515 break; 516 517 case 0x94: /* GPIO_SETDATAOUT */ 518 omap2_gpio_module_out_update(s, ~s->outputs & value); 519 break; 520 521 default: 522 OMAP_BAD_REG(addr); 523 return; 524 } 525 } 526 527 static uint32_t omap2_gpio_module_readp(void *opaque, hwaddr addr) 528 { 529 return omap2_gpio_module_read(opaque, addr & ~3) >> ((addr & 3) << 3); 530 } 531 532 static void omap2_gpio_module_writep(void *opaque, hwaddr addr, 533 uint32_t value) 534 { 535 uint32_t cur = 0; 536 uint32_t mask = 0xffff; 537 538 switch (addr & ~3) { 539 case 0x00: /* GPIO_REVISION */ 540 case 0x14: /* GPIO_SYSSTATUS */ 541 case 0x38: /* GPIO_DATAIN */ 542 OMAP_RO_REG(addr); 543 break; 544 545 case 0x10: /* GPIO_SYSCONFIG */ 546 case 0x1c: /* GPIO_IRQENABLE1 */ 547 case 0x20: /* GPIO_WAKEUPENABLE */ 548 case 0x2c: /* GPIO_IRQENABLE2 */ 549 case 0x30: /* GPIO_CTRL */ 550 case 0x34: /* GPIO_OE */ 551 case 0x3c: /* GPIO_DATAOUT */ 552 case 0x40: /* GPIO_LEVELDETECT0 */ 553 case 0x44: /* GPIO_LEVELDETECT1 */ 554 case 0x48: /* GPIO_RISINGDETECT */ 555 case 0x4c: /* GPIO_FALLINGDETECT */ 556 case 0x50: /* GPIO_DEBOUNCENABLE */ 557 case 0x54: /* GPIO_DEBOUNCINGTIME */ 558 cur = omap2_gpio_module_read(opaque, addr & ~3) & 559 ~(mask << ((addr & 3) << 3)); 560 561 /* Fall through. */ 562 case 0x18: /* GPIO_IRQSTATUS1 */ 563 case 0x28: /* GPIO_IRQSTATUS2 */ 564 case 0x60: /* GPIO_CLEARIRQENABLE1 */ 565 case 0x64: /* GPIO_SETIRQENABLE1 */ 566 case 0x70: /* GPIO_CLEARIRQENABLE2 */ 567 case 0x74: /* GPIO_SETIREQNEABLE2 */ 568 case 0x80: /* GPIO_CLEARWKUENA */ 569 case 0x84: /* GPIO_SETWKUENA */ 570 case 0x90: /* GPIO_CLEARDATAOUT */ 571 case 0x94: /* GPIO_SETDATAOUT */ 572 value <<= (addr & 3) << 3; 573 omap2_gpio_module_write(opaque, addr, cur | value); 574 break; 575 576 default: 577 OMAP_BAD_REG(addr); 578 return; 579 } 580 } 581 582 static const MemoryRegionOps omap2_gpio_module_ops = { 583 .old_mmio = { 584 .read = { 585 omap2_gpio_module_readp, 586 omap2_gpio_module_readp, 587 omap2_gpio_module_read, 588 }, 589 .write = { 590 omap2_gpio_module_writep, 591 omap2_gpio_module_writep, 592 omap2_gpio_module_write, 593 }, 594 }, 595 .endianness = DEVICE_NATIVE_ENDIAN, 596 }; 597 598 static void omap_gpif_reset(DeviceState *dev) 599 { 600 struct omap_gpif_s *s = OMAP1_GPIO(dev); 601 602 omap_gpio_reset(&s->omap1); 603 } 604 605 static void omap2_gpif_reset(DeviceState *dev) 606 { 607 struct omap2_gpif_s *s = OMAP2_GPIO(dev); 608 int i; 609 610 for (i = 0; i < s->modulecount; i++) { 611 omap2_gpio_module_reset(&s->modules[i]); 612 } 613 s->autoidle = 0; 614 s->gpo = 0; 615 } 616 617 static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr, 618 unsigned size) 619 { 620 struct omap2_gpif_s *s = (struct omap2_gpif_s *) opaque; 621 622 switch (addr) { 623 case 0x00: /* IPGENERICOCPSPL_REVISION */ 624 return 0x18; 625 626 case 0x10: /* IPGENERICOCPSPL_SYSCONFIG */ 627 return s->autoidle; 628 629 case 0x14: /* IPGENERICOCPSPL_SYSSTATUS */ 630 return 0x01; 631 632 case 0x18: /* IPGENERICOCPSPL_IRQSTATUS */ 633 return 0x00; 634 635 case 0x40: /* IPGENERICOCPSPL_GPO */ 636 return s->gpo; 637 638 case 0x50: /* IPGENERICOCPSPL_GPI */ 639 return 0x00; 640 } 641 642 OMAP_BAD_REG(addr); 643 return 0; 644 } 645 646 static void omap2_gpif_top_write(void *opaque, hwaddr addr, 647 uint64_t value, unsigned size) 648 { 649 struct omap2_gpif_s *s = (struct omap2_gpif_s *) opaque; 650 651 switch (addr) { 652 case 0x00: /* IPGENERICOCPSPL_REVISION */ 653 case 0x14: /* IPGENERICOCPSPL_SYSSTATUS */ 654 case 0x18: /* IPGENERICOCPSPL_IRQSTATUS */ 655 case 0x50: /* IPGENERICOCPSPL_GPI */ 656 OMAP_RO_REG(addr); 657 break; 658 659 case 0x10: /* IPGENERICOCPSPL_SYSCONFIG */ 660 if (value & (1 << 1)) /* SOFTRESET */ 661 omap2_gpif_reset(DEVICE(s)); 662 s->autoidle = value & 1; 663 break; 664 665 case 0x40: /* IPGENERICOCPSPL_GPO */ 666 s->gpo = value & 1; 667 break; 668 669 default: 670 OMAP_BAD_REG(addr); 671 return; 672 } 673 } 674 675 static const MemoryRegionOps omap2_gpif_top_ops = { 676 .read = omap2_gpif_top_read, 677 .write = omap2_gpif_top_write, 678 .endianness = DEVICE_NATIVE_ENDIAN, 679 }; 680 681 static int omap_gpio_init(SysBusDevice *sbd) 682 { 683 DeviceState *dev = DEVICE(sbd); 684 struct omap_gpif_s *s = OMAP1_GPIO(dev); 685 686 if (!s->clk) { 687 hw_error("omap-gpio: clk not connected\n"); 688 } 689 qdev_init_gpio_in(dev, omap_gpio_set, 16); 690 qdev_init_gpio_out(dev, s->omap1.handler, 16); 691 sysbus_init_irq(sbd, &s->omap1.irq); 692 memory_region_init_io(&s->iomem, OBJECT(s), &omap_gpio_ops, &s->omap1, 693 "omap.gpio", 0x1000); 694 sysbus_init_mmio(sbd, &s->iomem); 695 return 0; 696 } 697 698 static int omap2_gpio_init(SysBusDevice *sbd) 699 { 700 DeviceState *dev = DEVICE(sbd); 701 struct omap2_gpif_s *s = OMAP2_GPIO(dev); 702 int i; 703 704 if (!s->iclk) { 705 hw_error("omap2-gpio: iclk not connected\n"); 706 } 707 if (s->mpu_model < omap3430) { 708 s->modulecount = (s->mpu_model < omap2430) ? 4 : 5; 709 memory_region_init_io(&s->iomem, OBJECT(s), &omap2_gpif_top_ops, s, 710 "omap2.gpio", 0x1000); 711 sysbus_init_mmio(sbd, &s->iomem); 712 } else { 713 s->modulecount = 6; 714 } 715 s->modules = g_malloc0(s->modulecount * sizeof(struct omap2_gpio_s)); 716 s->handler = g_malloc0(s->modulecount * 32 * sizeof(qemu_irq)); 717 qdev_init_gpio_in(dev, omap2_gpio_set, s->modulecount * 32); 718 qdev_init_gpio_out(dev, s->handler, s->modulecount * 32); 719 for (i = 0; i < s->modulecount; i++) { 720 struct omap2_gpio_s *m = &s->modules[i]; 721 if (!s->fclk[i]) { 722 hw_error("omap2-gpio: fclk%d not connected\n", i); 723 } 724 m->revision = (s->mpu_model < omap3430) ? 0x18 : 0x25; 725 m->handler = &s->handler[i * 32]; 726 sysbus_init_irq(sbd, &m->irq[0]); /* mpu irq */ 727 sysbus_init_irq(sbd, &m->irq[1]); /* dsp irq */ 728 sysbus_init_irq(sbd, &m->wkup); 729 memory_region_init_io(&m->iomem, OBJECT(s), &omap2_gpio_module_ops, m, 730 "omap.gpio-module", 0x1000); 731 sysbus_init_mmio(sbd, &m->iomem); 732 } 733 return 0; 734 } 735 736 /* Using qdev pointer properties for the clocks is not ideal. 737 * qdev should support a generic means of defining a 'port' with 738 * an arbitrary interface for connecting two devices. Then we 739 * could reframe the omap clock API in terms of clock ports, 740 * and get some type safety. For now the best qdev provides is 741 * passing an arbitrary pointer. 742 * (It's not possible to pass in the string which is the clock 743 * name, because this device does not have the necessary information 744 * (ie the struct omap_mpu_state_s*) to do the clockname to pointer 745 * translation.) 746 */ 747 748 static Property omap_gpio_properties[] = { 749 DEFINE_PROP_INT32("mpu_model", struct omap_gpif_s, mpu_model, 0), 750 DEFINE_PROP_PTR("clk", struct omap_gpif_s, clk), 751 DEFINE_PROP_END_OF_LIST(), 752 }; 753 754 static void omap_gpio_class_init(ObjectClass *klass, void *data) 755 { 756 DeviceClass *dc = DEVICE_CLASS(klass); 757 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); 758 759 k->init = omap_gpio_init; 760 dc->reset = omap_gpif_reset; 761 dc->props = omap_gpio_properties; 762 } 763 764 static const TypeInfo omap_gpio_info = { 765 .name = TYPE_OMAP1_GPIO, 766 .parent = TYPE_SYS_BUS_DEVICE, 767 .instance_size = sizeof(struct omap_gpif_s), 768 .class_init = omap_gpio_class_init, 769 }; 770 771 static Property omap2_gpio_properties[] = { 772 DEFINE_PROP_INT32("mpu_model", struct omap2_gpif_s, mpu_model, 0), 773 DEFINE_PROP_PTR("iclk", struct omap2_gpif_s, iclk), 774 DEFINE_PROP_PTR("fclk0", struct omap2_gpif_s, fclk[0]), 775 DEFINE_PROP_PTR("fclk1", struct omap2_gpif_s, fclk[1]), 776 DEFINE_PROP_PTR("fclk2", struct omap2_gpif_s, fclk[2]), 777 DEFINE_PROP_PTR("fclk3", struct omap2_gpif_s, fclk[3]), 778 DEFINE_PROP_PTR("fclk4", struct omap2_gpif_s, fclk[4]), 779 DEFINE_PROP_PTR("fclk5", struct omap2_gpif_s, fclk[5]), 780 DEFINE_PROP_END_OF_LIST(), 781 }; 782 783 static void omap2_gpio_class_init(ObjectClass *klass, void *data) 784 { 785 DeviceClass *dc = DEVICE_CLASS(klass); 786 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); 787 788 k->init = omap2_gpio_init; 789 dc->reset = omap2_gpif_reset; 790 dc->props = omap2_gpio_properties; 791 } 792 793 static const TypeInfo omap2_gpio_info = { 794 .name = TYPE_OMAP2_GPIO, 795 .parent = TYPE_SYS_BUS_DEVICE, 796 .instance_size = sizeof(struct omap2_gpif_s), 797 .class_init = omap2_gpio_class_init, 798 }; 799 800 static void omap_gpio_register_types(void) 801 { 802 type_register_static(&omap_gpio_info); 803 type_register_static(&omap2_gpio_info); 804 } 805 806 type_init(omap_gpio_register_types) 807