1 /* 2 * TI OMAP processors GPIO emulation. 3 * 4 * Copyright (C) 2006-2008 Andrzej Zaborowski <balrog@zabor.org> 5 * Copyright (C) 2007-2009 Nokia Corporation 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 or 10 * (at your option) version 3 of the License. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License along 18 * with this program; if not, see <http://www.gnu.org/licenses/>. 19 */ 20 21 #include "hw/hw.h" 22 #include "hw/arm/omap.h" 23 #include "hw/sysbus.h" 24 25 struct omap_gpio_s { 26 qemu_irq irq; 27 qemu_irq handler[16]; 28 29 uint16_t inputs; 30 uint16_t outputs; 31 uint16_t dir; 32 uint16_t edge; 33 uint16_t mask; 34 uint16_t ints; 35 uint16_t pins; 36 }; 37 38 struct omap_gpif_s { 39 SysBusDevice busdev; 40 MemoryRegion iomem; 41 int mpu_model; 42 void *clk; 43 struct omap_gpio_s omap1; 44 }; 45 46 /* General-Purpose I/O of OMAP1 */ 47 static void omap_gpio_set(void *opaque, int line, int level) 48 { 49 struct omap_gpio_s *s = &((struct omap_gpif_s *) opaque)->omap1; 50 uint16_t prev = s->inputs; 51 52 if (level) 53 s->inputs |= 1 << line; 54 else 55 s->inputs &= ~(1 << line); 56 57 if (((s->edge & s->inputs & ~prev) | (~s->edge & ~s->inputs & prev)) & 58 (1 << line) & s->dir & ~s->mask) { 59 s->ints |= 1 << line; 60 qemu_irq_raise(s->irq); 61 } 62 } 63 64 static uint64_t omap_gpio_read(void *opaque, hwaddr addr, 65 unsigned size) 66 { 67 struct omap_gpio_s *s = (struct omap_gpio_s *) opaque; 68 int offset = addr & OMAP_MPUI_REG_MASK; 69 70 if (size != 2) { 71 return omap_badwidth_read16(opaque, addr); 72 } 73 74 switch (offset) { 75 case 0x00: /* DATA_INPUT */ 76 return s->inputs & s->pins; 77 78 case 0x04: /* DATA_OUTPUT */ 79 return s->outputs; 80 81 case 0x08: /* DIRECTION_CONTROL */ 82 return s->dir; 83 84 case 0x0c: /* INTERRUPT_CONTROL */ 85 return s->edge; 86 87 case 0x10: /* INTERRUPT_MASK */ 88 return s->mask; 89 90 case 0x14: /* INTERRUPT_STATUS */ 91 return s->ints; 92 93 case 0x18: /* PIN_CONTROL (not in OMAP310) */ 94 OMAP_BAD_REG(addr); 95 return s->pins; 96 } 97 98 OMAP_BAD_REG(addr); 99 return 0; 100 } 101 102 static void omap_gpio_write(void *opaque, hwaddr addr, 103 uint64_t value, unsigned size) 104 { 105 struct omap_gpio_s *s = (struct omap_gpio_s *) opaque; 106 int offset = addr & OMAP_MPUI_REG_MASK; 107 uint16_t diff; 108 int ln; 109 110 if (size != 2) { 111 return omap_badwidth_write16(opaque, addr, value); 112 } 113 114 switch (offset) { 115 case 0x00: /* DATA_INPUT */ 116 OMAP_RO_REG(addr); 117 return; 118 119 case 0x04: /* DATA_OUTPUT */ 120 diff = (s->outputs ^ value) & ~s->dir; 121 s->outputs = value; 122 while ((ln = ffs(diff))) { 123 ln --; 124 if (s->handler[ln]) 125 qemu_set_irq(s->handler[ln], (value >> ln) & 1); 126 diff &= ~(1 << ln); 127 } 128 break; 129 130 case 0x08: /* DIRECTION_CONTROL */ 131 diff = s->outputs & (s->dir ^ value); 132 s->dir = value; 133 134 value = s->outputs & ~s->dir; 135 while ((ln = ffs(diff))) { 136 ln --; 137 if (s->handler[ln]) 138 qemu_set_irq(s->handler[ln], (value >> ln) & 1); 139 diff &= ~(1 << ln); 140 } 141 break; 142 143 case 0x0c: /* INTERRUPT_CONTROL */ 144 s->edge = value; 145 break; 146 147 case 0x10: /* INTERRUPT_MASK */ 148 s->mask = value; 149 break; 150 151 case 0x14: /* INTERRUPT_STATUS */ 152 s->ints &= ~value; 153 if (!s->ints) 154 qemu_irq_lower(s->irq); 155 break; 156 157 case 0x18: /* PIN_CONTROL (not in OMAP310 TRM) */ 158 OMAP_BAD_REG(addr); 159 s->pins = value; 160 break; 161 162 default: 163 OMAP_BAD_REG(addr); 164 return; 165 } 166 } 167 168 /* *Some* sources say the memory region is 32-bit. */ 169 static const MemoryRegionOps omap_gpio_ops = { 170 .read = omap_gpio_read, 171 .write = omap_gpio_write, 172 .endianness = DEVICE_NATIVE_ENDIAN, 173 }; 174 175 static void omap_gpio_reset(struct omap_gpio_s *s) 176 { 177 s->inputs = 0; 178 s->outputs = ~0; 179 s->dir = ~0; 180 s->edge = ~0; 181 s->mask = ~0; 182 s->ints = 0; 183 s->pins = ~0; 184 } 185 186 struct omap2_gpio_s { 187 qemu_irq irq[2]; 188 qemu_irq wkup; 189 qemu_irq *handler; 190 MemoryRegion iomem; 191 192 uint8_t revision; 193 uint8_t config[2]; 194 uint32_t inputs; 195 uint32_t outputs; 196 uint32_t dir; 197 uint32_t level[2]; 198 uint32_t edge[2]; 199 uint32_t mask[2]; 200 uint32_t wumask; 201 uint32_t ints[2]; 202 uint32_t debounce; 203 uint8_t delay; 204 }; 205 206 struct omap2_gpif_s { 207 SysBusDevice busdev; 208 MemoryRegion iomem; 209 int mpu_model; 210 void *iclk; 211 void *fclk[6]; 212 int modulecount; 213 struct omap2_gpio_s *modules; 214 qemu_irq *handler; 215 int autoidle; 216 int gpo; 217 }; 218 219 /* General-Purpose Interface of OMAP2/3 */ 220 static inline void omap2_gpio_module_int_update(struct omap2_gpio_s *s, 221 int line) 222 { 223 qemu_set_irq(s->irq[line], s->ints[line] & s->mask[line]); 224 } 225 226 static void omap2_gpio_module_wake(struct omap2_gpio_s *s, int line) 227 { 228 if (!(s->config[0] & (1 << 2))) /* ENAWAKEUP */ 229 return; 230 if (!(s->config[0] & (3 << 3))) /* Force Idle */ 231 return; 232 if (!(s->wumask & (1 << line))) 233 return; 234 235 qemu_irq_raise(s->wkup); 236 } 237 238 static inline void omap2_gpio_module_out_update(struct omap2_gpio_s *s, 239 uint32_t diff) 240 { 241 int ln; 242 243 s->outputs ^= diff; 244 diff &= ~s->dir; 245 while ((ln = ffs(diff))) { 246 ln --; 247 qemu_set_irq(s->handler[ln], (s->outputs >> ln) & 1); 248 diff &= ~(1 << ln); 249 } 250 } 251 252 static void omap2_gpio_module_level_update(struct omap2_gpio_s *s, int line) 253 { 254 s->ints[line] |= s->dir & 255 ((s->inputs & s->level[1]) | (~s->inputs & s->level[0])); 256 omap2_gpio_module_int_update(s, line); 257 } 258 259 static inline void omap2_gpio_module_int(struct omap2_gpio_s *s, int line) 260 { 261 s->ints[0] |= 1 << line; 262 omap2_gpio_module_int_update(s, 0); 263 s->ints[1] |= 1 << line; 264 omap2_gpio_module_int_update(s, 1); 265 omap2_gpio_module_wake(s, line); 266 } 267 268 static void omap2_gpio_set(void *opaque, int line, int level) 269 { 270 struct omap2_gpif_s *p = opaque; 271 struct omap2_gpio_s *s = &p->modules[line >> 5]; 272 273 line &= 31; 274 if (level) { 275 if (s->dir & (1 << line) & ((~s->inputs & s->edge[0]) | s->level[1])) 276 omap2_gpio_module_int(s, line); 277 s->inputs |= 1 << line; 278 } else { 279 if (s->dir & (1 << line) & ((s->inputs & s->edge[1]) | s->level[0])) 280 omap2_gpio_module_int(s, line); 281 s->inputs &= ~(1 << line); 282 } 283 } 284 285 static void omap2_gpio_module_reset(struct omap2_gpio_s *s) 286 { 287 s->config[0] = 0; 288 s->config[1] = 2; 289 s->ints[0] = 0; 290 s->ints[1] = 0; 291 s->mask[0] = 0; 292 s->mask[1] = 0; 293 s->wumask = 0; 294 s->dir = ~0; 295 s->level[0] = 0; 296 s->level[1] = 0; 297 s->edge[0] = 0; 298 s->edge[1] = 0; 299 s->debounce = 0; 300 s->delay = 0; 301 } 302 303 static uint32_t omap2_gpio_module_read(void *opaque, hwaddr addr) 304 { 305 struct omap2_gpio_s *s = (struct omap2_gpio_s *) opaque; 306 307 switch (addr) { 308 case 0x00: /* GPIO_REVISION */ 309 return s->revision; 310 311 case 0x10: /* GPIO_SYSCONFIG */ 312 return s->config[0]; 313 314 case 0x14: /* GPIO_SYSSTATUS */ 315 return 0x01; 316 317 case 0x18: /* GPIO_IRQSTATUS1 */ 318 return s->ints[0]; 319 320 case 0x1c: /* GPIO_IRQENABLE1 */ 321 case 0x60: /* GPIO_CLEARIRQENABLE1 */ 322 case 0x64: /* GPIO_SETIRQENABLE1 */ 323 return s->mask[0]; 324 325 case 0x20: /* GPIO_WAKEUPENABLE */ 326 case 0x80: /* GPIO_CLEARWKUENA */ 327 case 0x84: /* GPIO_SETWKUENA */ 328 return s->wumask; 329 330 case 0x28: /* GPIO_IRQSTATUS2 */ 331 return s->ints[1]; 332 333 case 0x2c: /* GPIO_IRQENABLE2 */ 334 case 0x70: /* GPIO_CLEARIRQENABLE2 */ 335 case 0x74: /* GPIO_SETIREQNEABLE2 */ 336 return s->mask[1]; 337 338 case 0x30: /* GPIO_CTRL */ 339 return s->config[1]; 340 341 case 0x34: /* GPIO_OE */ 342 return s->dir; 343 344 case 0x38: /* GPIO_DATAIN */ 345 return s->inputs; 346 347 case 0x3c: /* GPIO_DATAOUT */ 348 case 0x90: /* GPIO_CLEARDATAOUT */ 349 case 0x94: /* GPIO_SETDATAOUT */ 350 return s->outputs; 351 352 case 0x40: /* GPIO_LEVELDETECT0 */ 353 return s->level[0]; 354 355 case 0x44: /* GPIO_LEVELDETECT1 */ 356 return s->level[1]; 357 358 case 0x48: /* GPIO_RISINGDETECT */ 359 return s->edge[0]; 360 361 case 0x4c: /* GPIO_FALLINGDETECT */ 362 return s->edge[1]; 363 364 case 0x50: /* GPIO_DEBOUNCENABLE */ 365 return s->debounce; 366 367 case 0x54: /* GPIO_DEBOUNCINGTIME */ 368 return s->delay; 369 } 370 371 OMAP_BAD_REG(addr); 372 return 0; 373 } 374 375 static void omap2_gpio_module_write(void *opaque, hwaddr addr, 376 uint32_t value) 377 { 378 struct omap2_gpio_s *s = (struct omap2_gpio_s *) opaque; 379 uint32_t diff; 380 int ln; 381 382 switch (addr) { 383 case 0x00: /* GPIO_REVISION */ 384 case 0x14: /* GPIO_SYSSTATUS */ 385 case 0x38: /* GPIO_DATAIN */ 386 OMAP_RO_REG(addr); 387 break; 388 389 case 0x10: /* GPIO_SYSCONFIG */ 390 if (((value >> 3) & 3) == 3) 391 fprintf(stderr, "%s: bad IDLEMODE value\n", __FUNCTION__); 392 if (value & 2) 393 omap2_gpio_module_reset(s); 394 s->config[0] = value & 0x1d; 395 break; 396 397 case 0x18: /* GPIO_IRQSTATUS1 */ 398 if (s->ints[0] & value) { 399 s->ints[0] &= ~value; 400 omap2_gpio_module_level_update(s, 0); 401 } 402 break; 403 404 case 0x1c: /* GPIO_IRQENABLE1 */ 405 s->mask[0] = value; 406 omap2_gpio_module_int_update(s, 0); 407 break; 408 409 case 0x20: /* GPIO_WAKEUPENABLE */ 410 s->wumask = value; 411 break; 412 413 case 0x28: /* GPIO_IRQSTATUS2 */ 414 if (s->ints[1] & value) { 415 s->ints[1] &= ~value; 416 omap2_gpio_module_level_update(s, 1); 417 } 418 break; 419 420 case 0x2c: /* GPIO_IRQENABLE2 */ 421 s->mask[1] = value; 422 omap2_gpio_module_int_update(s, 1); 423 break; 424 425 case 0x30: /* GPIO_CTRL */ 426 s->config[1] = value & 7; 427 break; 428 429 case 0x34: /* GPIO_OE */ 430 diff = s->outputs & (s->dir ^ value); 431 s->dir = value; 432 433 value = s->outputs & ~s->dir; 434 while ((ln = ffs(diff))) { 435 diff &= ~(1 <<-- ln); 436 qemu_set_irq(s->handler[ln], (value >> ln) & 1); 437 } 438 439 omap2_gpio_module_level_update(s, 0); 440 omap2_gpio_module_level_update(s, 1); 441 break; 442 443 case 0x3c: /* GPIO_DATAOUT */ 444 omap2_gpio_module_out_update(s, s->outputs ^ value); 445 break; 446 447 case 0x40: /* GPIO_LEVELDETECT0 */ 448 s->level[0] = value; 449 omap2_gpio_module_level_update(s, 0); 450 omap2_gpio_module_level_update(s, 1); 451 break; 452 453 case 0x44: /* GPIO_LEVELDETECT1 */ 454 s->level[1] = value; 455 omap2_gpio_module_level_update(s, 0); 456 omap2_gpio_module_level_update(s, 1); 457 break; 458 459 case 0x48: /* GPIO_RISINGDETECT */ 460 s->edge[0] = value; 461 break; 462 463 case 0x4c: /* GPIO_FALLINGDETECT */ 464 s->edge[1] = value; 465 break; 466 467 case 0x50: /* GPIO_DEBOUNCENABLE */ 468 s->debounce = value; 469 break; 470 471 case 0x54: /* GPIO_DEBOUNCINGTIME */ 472 s->delay = value; 473 break; 474 475 case 0x60: /* GPIO_CLEARIRQENABLE1 */ 476 s->mask[0] &= ~value; 477 omap2_gpio_module_int_update(s, 0); 478 break; 479 480 case 0x64: /* GPIO_SETIRQENABLE1 */ 481 s->mask[0] |= value; 482 omap2_gpio_module_int_update(s, 0); 483 break; 484 485 case 0x70: /* GPIO_CLEARIRQENABLE2 */ 486 s->mask[1] &= ~value; 487 omap2_gpio_module_int_update(s, 1); 488 break; 489 490 case 0x74: /* GPIO_SETIREQNEABLE2 */ 491 s->mask[1] |= value; 492 omap2_gpio_module_int_update(s, 1); 493 break; 494 495 case 0x80: /* GPIO_CLEARWKUENA */ 496 s->wumask &= ~value; 497 break; 498 499 case 0x84: /* GPIO_SETWKUENA */ 500 s->wumask |= value; 501 break; 502 503 case 0x90: /* GPIO_CLEARDATAOUT */ 504 omap2_gpio_module_out_update(s, s->outputs & value); 505 break; 506 507 case 0x94: /* GPIO_SETDATAOUT */ 508 omap2_gpio_module_out_update(s, ~s->outputs & value); 509 break; 510 511 default: 512 OMAP_BAD_REG(addr); 513 return; 514 } 515 } 516 517 static uint32_t omap2_gpio_module_readp(void *opaque, hwaddr addr) 518 { 519 return omap2_gpio_module_read(opaque, addr & ~3) >> ((addr & 3) << 3); 520 } 521 522 static void omap2_gpio_module_writep(void *opaque, hwaddr addr, 523 uint32_t value) 524 { 525 uint32_t cur = 0; 526 uint32_t mask = 0xffff; 527 528 switch (addr & ~3) { 529 case 0x00: /* GPIO_REVISION */ 530 case 0x14: /* GPIO_SYSSTATUS */ 531 case 0x38: /* GPIO_DATAIN */ 532 OMAP_RO_REG(addr); 533 break; 534 535 case 0x10: /* GPIO_SYSCONFIG */ 536 case 0x1c: /* GPIO_IRQENABLE1 */ 537 case 0x20: /* GPIO_WAKEUPENABLE */ 538 case 0x2c: /* GPIO_IRQENABLE2 */ 539 case 0x30: /* GPIO_CTRL */ 540 case 0x34: /* GPIO_OE */ 541 case 0x3c: /* GPIO_DATAOUT */ 542 case 0x40: /* GPIO_LEVELDETECT0 */ 543 case 0x44: /* GPIO_LEVELDETECT1 */ 544 case 0x48: /* GPIO_RISINGDETECT */ 545 case 0x4c: /* GPIO_FALLINGDETECT */ 546 case 0x50: /* GPIO_DEBOUNCENABLE */ 547 case 0x54: /* GPIO_DEBOUNCINGTIME */ 548 cur = omap2_gpio_module_read(opaque, addr & ~3) & 549 ~(mask << ((addr & 3) << 3)); 550 551 /* Fall through. */ 552 case 0x18: /* GPIO_IRQSTATUS1 */ 553 case 0x28: /* GPIO_IRQSTATUS2 */ 554 case 0x60: /* GPIO_CLEARIRQENABLE1 */ 555 case 0x64: /* GPIO_SETIRQENABLE1 */ 556 case 0x70: /* GPIO_CLEARIRQENABLE2 */ 557 case 0x74: /* GPIO_SETIREQNEABLE2 */ 558 case 0x80: /* GPIO_CLEARWKUENA */ 559 case 0x84: /* GPIO_SETWKUENA */ 560 case 0x90: /* GPIO_CLEARDATAOUT */ 561 case 0x94: /* GPIO_SETDATAOUT */ 562 value <<= (addr & 3) << 3; 563 omap2_gpio_module_write(opaque, addr, cur | value); 564 break; 565 566 default: 567 OMAP_BAD_REG(addr); 568 return; 569 } 570 } 571 572 static const MemoryRegionOps omap2_gpio_module_ops = { 573 .old_mmio = { 574 .read = { 575 omap2_gpio_module_readp, 576 omap2_gpio_module_readp, 577 omap2_gpio_module_read, 578 }, 579 .write = { 580 omap2_gpio_module_writep, 581 omap2_gpio_module_writep, 582 omap2_gpio_module_write, 583 }, 584 }, 585 .endianness = DEVICE_NATIVE_ENDIAN, 586 }; 587 588 static void omap_gpif_reset(DeviceState *dev) 589 { 590 struct omap_gpif_s *s = FROM_SYSBUS(struct omap_gpif_s, 591 SYS_BUS_DEVICE(dev)); 592 omap_gpio_reset(&s->omap1); 593 } 594 595 static void omap2_gpif_reset(DeviceState *dev) 596 { 597 int i; 598 struct omap2_gpif_s *s = FROM_SYSBUS(struct omap2_gpif_s, 599 SYS_BUS_DEVICE(dev)); 600 for (i = 0; i < s->modulecount; i++) { 601 omap2_gpio_module_reset(&s->modules[i]); 602 } 603 s->autoidle = 0; 604 s->gpo = 0; 605 } 606 607 static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr, 608 unsigned size) 609 { 610 struct omap2_gpif_s *s = (struct omap2_gpif_s *) opaque; 611 612 switch (addr) { 613 case 0x00: /* IPGENERICOCPSPL_REVISION */ 614 return 0x18; 615 616 case 0x10: /* IPGENERICOCPSPL_SYSCONFIG */ 617 return s->autoidle; 618 619 case 0x14: /* IPGENERICOCPSPL_SYSSTATUS */ 620 return 0x01; 621 622 case 0x18: /* IPGENERICOCPSPL_IRQSTATUS */ 623 return 0x00; 624 625 case 0x40: /* IPGENERICOCPSPL_GPO */ 626 return s->gpo; 627 628 case 0x50: /* IPGENERICOCPSPL_GPI */ 629 return 0x00; 630 } 631 632 OMAP_BAD_REG(addr); 633 return 0; 634 } 635 636 static void omap2_gpif_top_write(void *opaque, hwaddr addr, 637 uint64_t value, unsigned size) 638 { 639 struct omap2_gpif_s *s = (struct omap2_gpif_s *) opaque; 640 641 switch (addr) { 642 case 0x00: /* IPGENERICOCPSPL_REVISION */ 643 case 0x14: /* IPGENERICOCPSPL_SYSSTATUS */ 644 case 0x18: /* IPGENERICOCPSPL_IRQSTATUS */ 645 case 0x50: /* IPGENERICOCPSPL_GPI */ 646 OMAP_RO_REG(addr); 647 break; 648 649 case 0x10: /* IPGENERICOCPSPL_SYSCONFIG */ 650 if (value & (1 << 1)) /* SOFTRESET */ 651 omap2_gpif_reset(&s->busdev.qdev); 652 s->autoidle = value & 1; 653 break; 654 655 case 0x40: /* IPGENERICOCPSPL_GPO */ 656 s->gpo = value & 1; 657 break; 658 659 default: 660 OMAP_BAD_REG(addr); 661 return; 662 } 663 } 664 665 static const MemoryRegionOps omap2_gpif_top_ops = { 666 .read = omap2_gpif_top_read, 667 .write = omap2_gpif_top_write, 668 .endianness = DEVICE_NATIVE_ENDIAN, 669 }; 670 671 static int omap_gpio_init(SysBusDevice *dev) 672 { 673 struct omap_gpif_s *s = FROM_SYSBUS(struct omap_gpif_s, dev); 674 if (!s->clk) { 675 hw_error("omap-gpio: clk not connected\n"); 676 } 677 qdev_init_gpio_in(&dev->qdev, omap_gpio_set, 16); 678 qdev_init_gpio_out(&dev->qdev, s->omap1.handler, 16); 679 sysbus_init_irq(dev, &s->omap1.irq); 680 memory_region_init_io(&s->iomem, &omap_gpio_ops, &s->omap1, 681 "omap.gpio", 0x1000); 682 sysbus_init_mmio(dev, &s->iomem); 683 return 0; 684 } 685 686 static int omap2_gpio_init(SysBusDevice *dev) 687 { 688 int i; 689 struct omap2_gpif_s *s = FROM_SYSBUS(struct omap2_gpif_s, dev); 690 if (!s->iclk) { 691 hw_error("omap2-gpio: iclk not connected\n"); 692 } 693 if (s->mpu_model < omap3430) { 694 s->modulecount = (s->mpu_model < omap2430) ? 4 : 5; 695 memory_region_init_io(&s->iomem, &omap2_gpif_top_ops, s, 696 "omap2.gpio", 0x1000); 697 sysbus_init_mmio(dev, &s->iomem); 698 } else { 699 s->modulecount = 6; 700 } 701 s->modules = g_malloc0(s->modulecount * sizeof(struct omap2_gpio_s)); 702 s->handler = g_malloc0(s->modulecount * 32 * sizeof(qemu_irq)); 703 qdev_init_gpio_in(&dev->qdev, omap2_gpio_set, s->modulecount * 32); 704 qdev_init_gpio_out(&dev->qdev, s->handler, s->modulecount * 32); 705 for (i = 0; i < s->modulecount; i++) { 706 struct omap2_gpio_s *m = &s->modules[i]; 707 if (!s->fclk[i]) { 708 hw_error("omap2-gpio: fclk%d not connected\n", i); 709 } 710 m->revision = (s->mpu_model < omap3430) ? 0x18 : 0x25; 711 m->handler = &s->handler[i * 32]; 712 sysbus_init_irq(dev, &m->irq[0]); /* mpu irq */ 713 sysbus_init_irq(dev, &m->irq[1]); /* dsp irq */ 714 sysbus_init_irq(dev, &m->wkup); 715 memory_region_init_io(&m->iomem, &omap2_gpio_module_ops, m, 716 "omap.gpio-module", 0x1000); 717 sysbus_init_mmio(dev, &m->iomem); 718 } 719 return 0; 720 } 721 722 /* Using qdev pointer properties for the clocks is not ideal. 723 * qdev should support a generic means of defining a 'port' with 724 * an arbitrary interface for connecting two devices. Then we 725 * could reframe the omap clock API in terms of clock ports, 726 * and get some type safety. For now the best qdev provides is 727 * passing an arbitrary pointer. 728 * (It's not possible to pass in the string which is the clock 729 * name, because this device does not have the necessary information 730 * (ie the struct omap_mpu_state_s*) to do the clockname to pointer 731 * translation.) 732 */ 733 734 static Property omap_gpio_properties[] = { 735 DEFINE_PROP_INT32("mpu_model", struct omap_gpif_s, mpu_model, 0), 736 DEFINE_PROP_PTR("clk", struct omap_gpif_s, clk), 737 DEFINE_PROP_END_OF_LIST(), 738 }; 739 740 static void omap_gpio_class_init(ObjectClass *klass, void *data) 741 { 742 DeviceClass *dc = DEVICE_CLASS(klass); 743 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); 744 745 k->init = omap_gpio_init; 746 dc->reset = omap_gpif_reset; 747 dc->props = omap_gpio_properties; 748 } 749 750 static const TypeInfo omap_gpio_info = { 751 .name = "omap-gpio", 752 .parent = TYPE_SYS_BUS_DEVICE, 753 .instance_size = sizeof(struct omap_gpif_s), 754 .class_init = omap_gpio_class_init, 755 }; 756 757 static Property omap2_gpio_properties[] = { 758 DEFINE_PROP_INT32("mpu_model", struct omap2_gpif_s, mpu_model, 0), 759 DEFINE_PROP_PTR("iclk", struct omap2_gpif_s, iclk), 760 DEFINE_PROP_PTR("fclk0", struct omap2_gpif_s, fclk[0]), 761 DEFINE_PROP_PTR("fclk1", struct omap2_gpif_s, fclk[1]), 762 DEFINE_PROP_PTR("fclk2", struct omap2_gpif_s, fclk[2]), 763 DEFINE_PROP_PTR("fclk3", struct omap2_gpif_s, fclk[3]), 764 DEFINE_PROP_PTR("fclk4", struct omap2_gpif_s, fclk[4]), 765 DEFINE_PROP_PTR("fclk5", struct omap2_gpif_s, fclk[5]), 766 DEFINE_PROP_END_OF_LIST(), 767 }; 768 769 static void omap2_gpio_class_init(ObjectClass *klass, void *data) 770 { 771 DeviceClass *dc = DEVICE_CLASS(klass); 772 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); 773 774 k->init = omap2_gpio_init; 775 dc->reset = omap2_gpif_reset; 776 dc->props = omap2_gpio_properties; 777 } 778 779 static const TypeInfo omap2_gpio_info = { 780 .name = "omap2-gpio", 781 .parent = TYPE_SYS_BUS_DEVICE, 782 .instance_size = sizeof(struct omap2_gpif_s), 783 .class_init = omap2_gpio_class_init, 784 }; 785 786 static void omap_gpio_register_types(void) 787 { 788 type_register_static(&omap_gpio_info); 789 type_register_static(&omap2_gpio_info); 790 } 791 792 type_init(omap_gpio_register_types) 793