1 /* 2 * TI OMAP processors GPIO emulation. 3 * 4 * Copyright (C) 2006-2008 Andrzej Zaborowski <balrog@zabor.org> 5 * Copyright (C) 2007-2009 Nokia Corporation 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 or 10 * (at your option) version 3 of the License. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License along 18 * with this program; if not, see <http://www.gnu.org/licenses/>. 19 */ 20 21 #include "qemu/osdep.h" 22 #include "hw/irq.h" 23 #include "hw/qdev-properties.h" 24 #include "hw/arm/omap.h" 25 #include "hw/sysbus.h" 26 #include "qemu/error-report.h" 27 #include "qemu/module.h" 28 #include "qapi/error.h" 29 30 struct omap_gpio_s { 31 qemu_irq irq; 32 qemu_irq handler[16]; 33 34 uint16_t inputs; 35 uint16_t outputs; 36 uint16_t dir; 37 uint16_t edge; 38 uint16_t mask; 39 uint16_t ints; 40 uint16_t pins; 41 }; 42 43 struct omap_gpif_s { 44 SysBusDevice parent_obj; 45 46 MemoryRegion iomem; 47 int mpu_model; 48 void *clk; 49 struct omap_gpio_s omap1; 50 }; 51 52 /* General-Purpose I/O of OMAP1 */ 53 static void omap_gpio_set(void *opaque, int line, int level) 54 { 55 struct omap_gpio_s *s = &((struct omap_gpif_s *) opaque)->omap1; 56 uint16_t prev = s->inputs; 57 58 if (level) 59 s->inputs |= 1 << line; 60 else 61 s->inputs &= ~(1 << line); 62 63 if (((s->edge & s->inputs & ~prev) | (~s->edge & ~s->inputs & prev)) & 64 (1 << line) & s->dir & ~s->mask) { 65 s->ints |= 1 << line; 66 qemu_irq_raise(s->irq); 67 } 68 } 69 70 static uint64_t omap_gpio_read(void *opaque, hwaddr addr, 71 unsigned size) 72 { 73 struct omap_gpio_s *s = (struct omap_gpio_s *) opaque; 74 int offset = addr & OMAP_MPUI_REG_MASK; 75 76 if (size != 2) { 77 return omap_badwidth_read16(opaque, addr); 78 } 79 80 switch (offset) { 81 case 0x00: /* DATA_INPUT */ 82 return s->inputs & s->pins; 83 84 case 0x04: /* DATA_OUTPUT */ 85 return s->outputs; 86 87 case 0x08: /* DIRECTION_CONTROL */ 88 return s->dir; 89 90 case 0x0c: /* INTERRUPT_CONTROL */ 91 return s->edge; 92 93 case 0x10: /* INTERRUPT_MASK */ 94 return s->mask; 95 96 case 0x14: /* INTERRUPT_STATUS */ 97 return s->ints; 98 99 case 0x18: /* PIN_CONTROL (not in OMAP310) */ 100 OMAP_BAD_REG(addr); 101 return s->pins; 102 } 103 104 OMAP_BAD_REG(addr); 105 return 0; 106 } 107 108 static void omap_gpio_write(void *opaque, hwaddr addr, 109 uint64_t value, unsigned size) 110 { 111 struct omap_gpio_s *s = (struct omap_gpio_s *) opaque; 112 int offset = addr & OMAP_MPUI_REG_MASK; 113 uint16_t diff; 114 int ln; 115 116 if (size != 2) { 117 omap_badwidth_write16(opaque, addr, value); 118 return; 119 } 120 121 switch (offset) { 122 case 0x00: /* DATA_INPUT */ 123 OMAP_RO_REG(addr); 124 return; 125 126 case 0x04: /* DATA_OUTPUT */ 127 diff = (s->outputs ^ value) & ~s->dir; 128 s->outputs = value; 129 while ((ln = ctz32(diff)) != 32) { 130 if (s->handler[ln]) 131 qemu_set_irq(s->handler[ln], (value >> ln) & 1); 132 diff &= ~(1 << ln); 133 } 134 break; 135 136 case 0x08: /* DIRECTION_CONTROL */ 137 diff = s->outputs & (s->dir ^ value); 138 s->dir = value; 139 140 value = s->outputs & ~s->dir; 141 while ((ln = ctz32(diff)) != 32) { 142 if (s->handler[ln]) 143 qemu_set_irq(s->handler[ln], (value >> ln) & 1); 144 diff &= ~(1 << ln); 145 } 146 break; 147 148 case 0x0c: /* INTERRUPT_CONTROL */ 149 s->edge = value; 150 break; 151 152 case 0x10: /* INTERRUPT_MASK */ 153 s->mask = value; 154 break; 155 156 case 0x14: /* INTERRUPT_STATUS */ 157 s->ints &= ~value; 158 if (!s->ints) 159 qemu_irq_lower(s->irq); 160 break; 161 162 case 0x18: /* PIN_CONTROL (not in OMAP310 TRM) */ 163 OMAP_BAD_REG(addr); 164 s->pins = value; 165 break; 166 167 default: 168 OMAP_BAD_REG(addr); 169 return; 170 } 171 } 172 173 /* *Some* sources say the memory region is 32-bit. */ 174 static const MemoryRegionOps omap_gpio_ops = { 175 .read = omap_gpio_read, 176 .write = omap_gpio_write, 177 .endianness = DEVICE_NATIVE_ENDIAN, 178 }; 179 180 static void omap_gpio_reset(struct omap_gpio_s *s) 181 { 182 s->inputs = 0; 183 s->outputs = ~0; 184 s->dir = ~0; 185 s->edge = ~0; 186 s->mask = ~0; 187 s->ints = 0; 188 s->pins = ~0; 189 } 190 191 struct omap2_gpio_s { 192 qemu_irq irq[2]; 193 qemu_irq wkup; 194 qemu_irq *handler; 195 MemoryRegion iomem; 196 197 uint8_t revision; 198 uint8_t config[2]; 199 uint32_t inputs; 200 uint32_t outputs; 201 uint32_t dir; 202 uint32_t level[2]; 203 uint32_t edge[2]; 204 uint32_t mask[2]; 205 uint32_t wumask; 206 uint32_t ints[2]; 207 uint32_t debounce; 208 uint8_t delay; 209 }; 210 211 struct omap2_gpif_s { 212 SysBusDevice parent_obj; 213 214 MemoryRegion iomem; 215 int mpu_model; 216 void *iclk; 217 void *fclk[6]; 218 int modulecount; 219 struct omap2_gpio_s *modules; 220 qemu_irq *handler; 221 int autoidle; 222 int gpo; 223 }; 224 225 /* General-Purpose Interface of OMAP2/3 */ 226 static inline void omap2_gpio_module_int_update(struct omap2_gpio_s *s, 227 int line) 228 { 229 qemu_set_irq(s->irq[line], s->ints[line] & s->mask[line]); 230 } 231 232 static void omap2_gpio_module_wake(struct omap2_gpio_s *s, int line) 233 { 234 if (!(s->config[0] & (1 << 2))) /* ENAWAKEUP */ 235 return; 236 if (!(s->config[0] & (3 << 3))) /* Force Idle */ 237 return; 238 if (!(s->wumask & (1 << line))) 239 return; 240 241 qemu_irq_raise(s->wkup); 242 } 243 244 static inline void omap2_gpio_module_out_update(struct omap2_gpio_s *s, 245 uint32_t diff) 246 { 247 int ln; 248 249 s->outputs ^= diff; 250 diff &= ~s->dir; 251 while ((ln = ctz32(diff)) != 32) { 252 qemu_set_irq(s->handler[ln], (s->outputs >> ln) & 1); 253 diff &= ~(1 << ln); 254 } 255 } 256 257 static void omap2_gpio_module_level_update(struct omap2_gpio_s *s, int line) 258 { 259 s->ints[line] |= s->dir & 260 ((s->inputs & s->level[1]) | (~s->inputs & s->level[0])); 261 omap2_gpio_module_int_update(s, line); 262 } 263 264 static inline void omap2_gpio_module_int(struct omap2_gpio_s *s, int line) 265 { 266 s->ints[0] |= 1 << line; 267 omap2_gpio_module_int_update(s, 0); 268 s->ints[1] |= 1 << line; 269 omap2_gpio_module_int_update(s, 1); 270 omap2_gpio_module_wake(s, line); 271 } 272 273 static void omap2_gpio_set(void *opaque, int line, int level) 274 { 275 struct omap2_gpif_s *p = opaque; 276 struct omap2_gpio_s *s = &p->modules[line >> 5]; 277 278 line &= 31; 279 if (level) { 280 if (s->dir & (1 << line) & ((~s->inputs & s->edge[0]) | s->level[1])) 281 omap2_gpio_module_int(s, line); 282 s->inputs |= 1 << line; 283 } else { 284 if (s->dir & (1 << line) & ((s->inputs & s->edge[1]) | s->level[0])) 285 omap2_gpio_module_int(s, line); 286 s->inputs &= ~(1 << line); 287 } 288 } 289 290 static void omap2_gpio_module_reset(struct omap2_gpio_s *s) 291 { 292 s->config[0] = 0; 293 s->config[1] = 2; 294 s->ints[0] = 0; 295 s->ints[1] = 0; 296 s->mask[0] = 0; 297 s->mask[1] = 0; 298 s->wumask = 0; 299 s->dir = ~0; 300 s->level[0] = 0; 301 s->level[1] = 0; 302 s->edge[0] = 0; 303 s->edge[1] = 0; 304 s->debounce = 0; 305 s->delay = 0; 306 } 307 308 static uint32_t omap2_gpio_module_read(void *opaque, hwaddr addr) 309 { 310 struct omap2_gpio_s *s = (struct omap2_gpio_s *) opaque; 311 312 switch (addr) { 313 case 0x00: /* GPIO_REVISION */ 314 return s->revision; 315 316 case 0x10: /* GPIO_SYSCONFIG */ 317 return s->config[0]; 318 319 case 0x14: /* GPIO_SYSSTATUS */ 320 return 0x01; 321 322 case 0x18: /* GPIO_IRQSTATUS1 */ 323 return s->ints[0]; 324 325 case 0x1c: /* GPIO_IRQENABLE1 */ 326 case 0x60: /* GPIO_CLEARIRQENABLE1 */ 327 case 0x64: /* GPIO_SETIRQENABLE1 */ 328 return s->mask[0]; 329 330 case 0x20: /* GPIO_WAKEUPENABLE */ 331 case 0x80: /* GPIO_CLEARWKUENA */ 332 case 0x84: /* GPIO_SETWKUENA */ 333 return s->wumask; 334 335 case 0x28: /* GPIO_IRQSTATUS2 */ 336 return s->ints[1]; 337 338 case 0x2c: /* GPIO_IRQENABLE2 */ 339 case 0x70: /* GPIO_CLEARIRQENABLE2 */ 340 case 0x74: /* GPIO_SETIREQNEABLE2 */ 341 return s->mask[1]; 342 343 case 0x30: /* GPIO_CTRL */ 344 return s->config[1]; 345 346 case 0x34: /* GPIO_OE */ 347 return s->dir; 348 349 case 0x38: /* GPIO_DATAIN */ 350 return s->inputs; 351 352 case 0x3c: /* GPIO_DATAOUT */ 353 case 0x90: /* GPIO_CLEARDATAOUT */ 354 case 0x94: /* GPIO_SETDATAOUT */ 355 return s->outputs; 356 357 case 0x40: /* GPIO_LEVELDETECT0 */ 358 return s->level[0]; 359 360 case 0x44: /* GPIO_LEVELDETECT1 */ 361 return s->level[1]; 362 363 case 0x48: /* GPIO_RISINGDETECT */ 364 return s->edge[0]; 365 366 case 0x4c: /* GPIO_FALLINGDETECT */ 367 return s->edge[1]; 368 369 case 0x50: /* GPIO_DEBOUNCENABLE */ 370 return s->debounce; 371 372 case 0x54: /* GPIO_DEBOUNCINGTIME */ 373 return s->delay; 374 } 375 376 OMAP_BAD_REG(addr); 377 return 0; 378 } 379 380 static void omap2_gpio_module_write(void *opaque, hwaddr addr, 381 uint32_t value) 382 { 383 struct omap2_gpio_s *s = (struct omap2_gpio_s *) opaque; 384 uint32_t diff; 385 int ln; 386 387 switch (addr) { 388 case 0x00: /* GPIO_REVISION */ 389 case 0x14: /* GPIO_SYSSTATUS */ 390 case 0x38: /* GPIO_DATAIN */ 391 OMAP_RO_REG(addr); 392 break; 393 394 case 0x10: /* GPIO_SYSCONFIG */ 395 if (((value >> 3) & 3) == 3) 396 fprintf(stderr, "%s: bad IDLEMODE value\n", __func__); 397 if (value & 2) 398 omap2_gpio_module_reset(s); 399 s->config[0] = value & 0x1d; 400 break; 401 402 case 0x18: /* GPIO_IRQSTATUS1 */ 403 if (s->ints[0] & value) { 404 s->ints[0] &= ~value; 405 omap2_gpio_module_level_update(s, 0); 406 } 407 break; 408 409 case 0x1c: /* GPIO_IRQENABLE1 */ 410 s->mask[0] = value; 411 omap2_gpio_module_int_update(s, 0); 412 break; 413 414 case 0x20: /* GPIO_WAKEUPENABLE */ 415 s->wumask = value; 416 break; 417 418 case 0x28: /* GPIO_IRQSTATUS2 */ 419 if (s->ints[1] & value) { 420 s->ints[1] &= ~value; 421 omap2_gpio_module_level_update(s, 1); 422 } 423 break; 424 425 case 0x2c: /* GPIO_IRQENABLE2 */ 426 s->mask[1] = value; 427 omap2_gpio_module_int_update(s, 1); 428 break; 429 430 case 0x30: /* GPIO_CTRL */ 431 s->config[1] = value & 7; 432 break; 433 434 case 0x34: /* GPIO_OE */ 435 diff = s->outputs & (s->dir ^ value); 436 s->dir = value; 437 438 value = s->outputs & ~s->dir; 439 while ((ln = ctz32(diff)) != 32) { 440 diff &= ~(1 << ln); 441 qemu_set_irq(s->handler[ln], (value >> ln) & 1); 442 } 443 444 omap2_gpio_module_level_update(s, 0); 445 omap2_gpio_module_level_update(s, 1); 446 break; 447 448 case 0x3c: /* GPIO_DATAOUT */ 449 omap2_gpio_module_out_update(s, s->outputs ^ value); 450 break; 451 452 case 0x40: /* GPIO_LEVELDETECT0 */ 453 s->level[0] = value; 454 omap2_gpio_module_level_update(s, 0); 455 omap2_gpio_module_level_update(s, 1); 456 break; 457 458 case 0x44: /* GPIO_LEVELDETECT1 */ 459 s->level[1] = value; 460 omap2_gpio_module_level_update(s, 0); 461 omap2_gpio_module_level_update(s, 1); 462 break; 463 464 case 0x48: /* GPIO_RISINGDETECT */ 465 s->edge[0] = value; 466 break; 467 468 case 0x4c: /* GPIO_FALLINGDETECT */ 469 s->edge[1] = value; 470 break; 471 472 case 0x50: /* GPIO_DEBOUNCENABLE */ 473 s->debounce = value; 474 break; 475 476 case 0x54: /* GPIO_DEBOUNCINGTIME */ 477 s->delay = value; 478 break; 479 480 case 0x60: /* GPIO_CLEARIRQENABLE1 */ 481 s->mask[0] &= ~value; 482 omap2_gpio_module_int_update(s, 0); 483 break; 484 485 case 0x64: /* GPIO_SETIRQENABLE1 */ 486 s->mask[0] |= value; 487 omap2_gpio_module_int_update(s, 0); 488 break; 489 490 case 0x70: /* GPIO_CLEARIRQENABLE2 */ 491 s->mask[1] &= ~value; 492 omap2_gpio_module_int_update(s, 1); 493 break; 494 495 case 0x74: /* GPIO_SETIREQNEABLE2 */ 496 s->mask[1] |= value; 497 omap2_gpio_module_int_update(s, 1); 498 break; 499 500 case 0x80: /* GPIO_CLEARWKUENA */ 501 s->wumask &= ~value; 502 break; 503 504 case 0x84: /* GPIO_SETWKUENA */ 505 s->wumask |= value; 506 break; 507 508 case 0x90: /* GPIO_CLEARDATAOUT */ 509 omap2_gpio_module_out_update(s, s->outputs & value); 510 break; 511 512 case 0x94: /* GPIO_SETDATAOUT */ 513 omap2_gpio_module_out_update(s, ~s->outputs & value); 514 break; 515 516 default: 517 OMAP_BAD_REG(addr); 518 return; 519 } 520 } 521 522 static uint64_t omap2_gpio_module_readp(void *opaque, hwaddr addr, 523 unsigned size) 524 { 525 return omap2_gpio_module_read(opaque, addr & ~3) >> ((addr & 3) << 3); 526 } 527 528 static void omap2_gpio_module_writep(void *opaque, hwaddr addr, 529 uint64_t value, unsigned size) 530 { 531 uint32_t cur = 0; 532 uint32_t mask = 0xffff; 533 534 if (size == 4) { 535 omap2_gpio_module_write(opaque, addr, value); 536 return; 537 } 538 539 switch (addr & ~3) { 540 case 0x00: /* GPIO_REVISION */ 541 case 0x14: /* GPIO_SYSSTATUS */ 542 case 0x38: /* GPIO_DATAIN */ 543 OMAP_RO_REG(addr); 544 break; 545 546 case 0x10: /* GPIO_SYSCONFIG */ 547 case 0x1c: /* GPIO_IRQENABLE1 */ 548 case 0x20: /* GPIO_WAKEUPENABLE */ 549 case 0x2c: /* GPIO_IRQENABLE2 */ 550 case 0x30: /* GPIO_CTRL */ 551 case 0x34: /* GPIO_OE */ 552 case 0x3c: /* GPIO_DATAOUT */ 553 case 0x40: /* GPIO_LEVELDETECT0 */ 554 case 0x44: /* GPIO_LEVELDETECT1 */ 555 case 0x48: /* GPIO_RISINGDETECT */ 556 case 0x4c: /* GPIO_FALLINGDETECT */ 557 case 0x50: /* GPIO_DEBOUNCENABLE */ 558 case 0x54: /* GPIO_DEBOUNCINGTIME */ 559 cur = omap2_gpio_module_read(opaque, addr & ~3) & 560 ~(mask << ((addr & 3) << 3)); 561 562 /* Fall through. */ 563 case 0x18: /* GPIO_IRQSTATUS1 */ 564 case 0x28: /* GPIO_IRQSTATUS2 */ 565 case 0x60: /* GPIO_CLEARIRQENABLE1 */ 566 case 0x64: /* GPIO_SETIRQENABLE1 */ 567 case 0x70: /* GPIO_CLEARIRQENABLE2 */ 568 case 0x74: /* GPIO_SETIREQNEABLE2 */ 569 case 0x80: /* GPIO_CLEARWKUENA */ 570 case 0x84: /* GPIO_SETWKUENA */ 571 case 0x90: /* GPIO_CLEARDATAOUT */ 572 case 0x94: /* GPIO_SETDATAOUT */ 573 value <<= (addr & 3) << 3; 574 omap2_gpio_module_write(opaque, addr, cur | value); 575 break; 576 577 default: 578 OMAP_BAD_REG(addr); 579 return; 580 } 581 } 582 583 static const MemoryRegionOps omap2_gpio_module_ops = { 584 .read = omap2_gpio_module_readp, 585 .write = omap2_gpio_module_writep, 586 .valid.min_access_size = 1, 587 .valid.max_access_size = 4, 588 .endianness = DEVICE_NATIVE_ENDIAN, 589 }; 590 591 static void omap_gpif_reset(DeviceState *dev) 592 { 593 struct omap_gpif_s *s = OMAP1_GPIO(dev); 594 595 omap_gpio_reset(&s->omap1); 596 } 597 598 static void omap2_gpif_reset(DeviceState *dev) 599 { 600 struct omap2_gpif_s *s = OMAP2_GPIO(dev); 601 int i; 602 603 for (i = 0; i < s->modulecount; i++) { 604 omap2_gpio_module_reset(&s->modules[i]); 605 } 606 s->autoidle = 0; 607 s->gpo = 0; 608 } 609 610 static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr, 611 unsigned size) 612 { 613 struct omap2_gpif_s *s = (struct omap2_gpif_s *) opaque; 614 615 switch (addr) { 616 case 0x00: /* IPGENERICOCPSPL_REVISION */ 617 return 0x18; 618 619 case 0x10: /* IPGENERICOCPSPL_SYSCONFIG */ 620 return s->autoidle; 621 622 case 0x14: /* IPGENERICOCPSPL_SYSSTATUS */ 623 return 0x01; 624 625 case 0x18: /* IPGENERICOCPSPL_IRQSTATUS */ 626 return 0x00; 627 628 case 0x40: /* IPGENERICOCPSPL_GPO */ 629 return s->gpo; 630 631 case 0x50: /* IPGENERICOCPSPL_GPI */ 632 return 0x00; 633 } 634 635 OMAP_BAD_REG(addr); 636 return 0; 637 } 638 639 static void omap2_gpif_top_write(void *opaque, hwaddr addr, 640 uint64_t value, unsigned size) 641 { 642 struct omap2_gpif_s *s = (struct omap2_gpif_s *) opaque; 643 644 switch (addr) { 645 case 0x00: /* IPGENERICOCPSPL_REVISION */ 646 case 0x14: /* IPGENERICOCPSPL_SYSSTATUS */ 647 case 0x18: /* IPGENERICOCPSPL_IRQSTATUS */ 648 case 0x50: /* IPGENERICOCPSPL_GPI */ 649 OMAP_RO_REG(addr); 650 break; 651 652 case 0x10: /* IPGENERICOCPSPL_SYSCONFIG */ 653 if (value & (1 << 1)) /* SOFTRESET */ 654 omap2_gpif_reset(DEVICE(s)); 655 s->autoidle = value & 1; 656 break; 657 658 case 0x40: /* IPGENERICOCPSPL_GPO */ 659 s->gpo = value & 1; 660 break; 661 662 default: 663 OMAP_BAD_REG(addr); 664 return; 665 } 666 } 667 668 static const MemoryRegionOps omap2_gpif_top_ops = { 669 .read = omap2_gpif_top_read, 670 .write = omap2_gpif_top_write, 671 .endianness = DEVICE_NATIVE_ENDIAN, 672 }; 673 674 static void omap_gpio_init(Object *obj) 675 { 676 DeviceState *dev = DEVICE(obj); 677 struct omap_gpif_s *s = OMAP1_GPIO(obj); 678 SysBusDevice *sbd = SYS_BUS_DEVICE(obj); 679 680 qdev_init_gpio_in(dev, omap_gpio_set, 16); 681 qdev_init_gpio_out(dev, s->omap1.handler, 16); 682 sysbus_init_irq(sbd, &s->omap1.irq); 683 memory_region_init_io(&s->iomem, obj, &omap_gpio_ops, &s->omap1, 684 "omap.gpio", 0x1000); 685 sysbus_init_mmio(sbd, &s->iomem); 686 } 687 688 static void omap_gpio_realize(DeviceState *dev, Error **errp) 689 { 690 struct omap_gpif_s *s = OMAP1_GPIO(dev); 691 692 if (!s->clk) { 693 error_setg(errp, "omap-gpio: clk not connected"); 694 } 695 } 696 697 static void omap2_gpio_realize(DeviceState *dev, Error **errp) 698 { 699 struct omap2_gpif_s *s = OMAP2_GPIO(dev); 700 SysBusDevice *sbd = SYS_BUS_DEVICE(dev); 701 int i; 702 703 if (!s->iclk) { 704 error_setg(errp, "omap2-gpio: iclk not connected"); 705 return; 706 } 707 708 s->modulecount = s->mpu_model < omap2430 ? 4 709 : s->mpu_model < omap3430 ? 5 710 : 6; 711 712 if (s->mpu_model < omap3430) { 713 memory_region_init_io(&s->iomem, OBJECT(dev), &omap2_gpif_top_ops, s, 714 "omap2.gpio", 0x1000); 715 sysbus_init_mmio(sbd, &s->iomem); 716 } 717 718 s->modules = g_new0(struct omap2_gpio_s, s->modulecount); 719 s->handler = g_new0(qemu_irq, s->modulecount * 32); 720 qdev_init_gpio_in(dev, omap2_gpio_set, s->modulecount * 32); 721 qdev_init_gpio_out(dev, s->handler, s->modulecount * 32); 722 723 for (i = 0; i < s->modulecount; i++) { 724 struct omap2_gpio_s *m = &s->modules[i]; 725 726 if (!s->fclk[i]) { 727 error_setg(errp, "omap2-gpio: fclk%d not connected", i); 728 return; 729 } 730 731 m->revision = (s->mpu_model < omap3430) ? 0x18 : 0x25; 732 m->handler = &s->handler[i * 32]; 733 sysbus_init_irq(sbd, &m->irq[0]); /* mpu irq */ 734 sysbus_init_irq(sbd, &m->irq[1]); /* dsp irq */ 735 sysbus_init_irq(sbd, &m->wkup); 736 memory_region_init_io(&m->iomem, OBJECT(dev), &omap2_gpio_module_ops, m, 737 "omap.gpio-module", 0x1000); 738 sysbus_init_mmio(sbd, &m->iomem); 739 } 740 } 741 742 void omap_gpio_set_clk(omap_gpif *gpio, omap_clk clk) 743 { 744 gpio->clk = clk; 745 } 746 747 static Property omap_gpio_properties[] = { 748 DEFINE_PROP_INT32("mpu_model", struct omap_gpif_s, mpu_model, 0), 749 DEFINE_PROP_END_OF_LIST(), 750 }; 751 752 static void omap_gpio_class_init(ObjectClass *klass, void *data) 753 { 754 DeviceClass *dc = DEVICE_CLASS(klass); 755 756 dc->realize = omap_gpio_realize; 757 dc->reset = omap_gpif_reset; 758 dc->props = omap_gpio_properties; 759 /* Reason: pointer property "clk" */ 760 dc->user_creatable = false; 761 } 762 763 static const TypeInfo omap_gpio_info = { 764 .name = TYPE_OMAP1_GPIO, 765 .parent = TYPE_SYS_BUS_DEVICE, 766 .instance_size = sizeof(struct omap_gpif_s), 767 .instance_init = omap_gpio_init, 768 .class_init = omap_gpio_class_init, 769 }; 770 771 void omap2_gpio_set_iclk(omap2_gpif *gpio, omap_clk clk) 772 { 773 gpio->iclk = clk; 774 } 775 776 void omap2_gpio_set_fclk(omap2_gpif *gpio, uint8_t i, omap_clk clk) 777 { 778 assert(i <= 5); 779 gpio->fclk[i] = clk; 780 } 781 782 static Property omap2_gpio_properties[] = { 783 DEFINE_PROP_INT32("mpu_model", struct omap2_gpif_s, mpu_model, 0), 784 DEFINE_PROP_END_OF_LIST(), 785 }; 786 787 static void omap2_gpio_class_init(ObjectClass *klass, void *data) 788 { 789 DeviceClass *dc = DEVICE_CLASS(klass); 790 791 dc->realize = omap2_gpio_realize; 792 dc->reset = omap2_gpif_reset; 793 dc->props = omap2_gpio_properties; 794 /* Reason: pointer properties "iclk", "fclk0", ..., "fclk5" */ 795 dc->user_creatable = false; 796 } 797 798 static const TypeInfo omap2_gpio_info = { 799 .name = TYPE_OMAP2_GPIO, 800 .parent = TYPE_SYS_BUS_DEVICE, 801 .instance_size = sizeof(struct omap2_gpif_s), 802 .class_init = omap2_gpio_class_init, 803 }; 804 805 static void omap_gpio_register_types(void) 806 { 807 type_register_static(&omap_gpio_info); 808 type_register_static(&omap2_gpio_info); 809 } 810 811 type_init(omap_gpio_register_types) 812