1 /* 2 * ASPEED GPIO Controller 3 * 4 * Copyright (C) 2017-2019 IBM Corp. 5 * 6 * SPDX-License-Identifier: GPL-2.0-or-later 7 */ 8 9 #include "qemu/osdep.h" 10 #include "qemu/host-utils.h" 11 #include "qemu/log.h" 12 #include "hw/gpio/aspeed_gpio.h" 13 #include "hw/misc/aspeed_scu.h" 14 #include "qapi/error.h" 15 #include "qapi/visitor.h" 16 #include "hw/irq.h" 17 #include "migration/vmstate.h" 18 19 #define GPIOS_PER_GROUP 8 20 21 /* GPIO Source Types */ 22 #define ASPEED_CMD_SRC_MASK 0x01010101 23 #define ASPEED_SOURCE_ARM 0 24 #define ASPEED_SOURCE_LPC 1 25 #define ASPEED_SOURCE_COPROCESSOR 2 26 #define ASPEED_SOURCE_RESERVED 3 27 28 /* GPIO Interrupt Triggers */ 29 /* 30 * For each set of gpios there are three sensitivity registers that control 31 * the interrupt trigger mode. 32 * 33 * | 2 | 1 | 0 | trigger mode 34 * ----------------------------- 35 * | 0 | 0 | 0 | falling-edge 36 * | 0 | 0 | 1 | rising-edge 37 * | 0 | 1 | 0 | level-low 38 * | 0 | 1 | 1 | level-high 39 * | 1 | X | X | dual-edge 40 */ 41 #define ASPEED_FALLING_EDGE 0 42 #define ASPEED_RISING_EDGE 1 43 #define ASPEED_LEVEL_LOW 2 44 #define ASPEED_LEVEL_HIGH 3 45 #define ASPEED_DUAL_EDGE 4 46 47 /* GPIO Register Address Offsets */ 48 #define GPIO_ABCD_DATA_VALUE (0x000 >> 2) 49 #define GPIO_ABCD_DIRECTION (0x004 >> 2) 50 #define GPIO_ABCD_INT_ENABLE (0x008 >> 2) 51 #define GPIO_ABCD_INT_SENS_0 (0x00C >> 2) 52 #define GPIO_ABCD_INT_SENS_1 (0x010 >> 2) 53 #define GPIO_ABCD_INT_SENS_2 (0x014 >> 2) 54 #define GPIO_ABCD_INT_STATUS (0x018 >> 2) 55 #define GPIO_ABCD_RESET_TOLERANT (0x01C >> 2) 56 #define GPIO_EFGH_DATA_VALUE (0x020 >> 2) 57 #define GPIO_EFGH_DIRECTION (0x024 >> 2) 58 #define GPIO_EFGH_INT_ENABLE (0x028 >> 2) 59 #define GPIO_EFGH_INT_SENS_0 (0x02C >> 2) 60 #define GPIO_EFGH_INT_SENS_1 (0x030 >> 2) 61 #define GPIO_EFGH_INT_SENS_2 (0x034 >> 2) 62 #define GPIO_EFGH_INT_STATUS (0x038 >> 2) 63 #define GPIO_EFGH_RESET_TOLERANT (0x03C >> 2) 64 #define GPIO_ABCD_DEBOUNCE_1 (0x040 >> 2) 65 #define GPIO_ABCD_DEBOUNCE_2 (0x044 >> 2) 66 #define GPIO_EFGH_DEBOUNCE_1 (0x048 >> 2) 67 #define GPIO_EFGH_DEBOUNCE_2 (0x04C >> 2) 68 #define GPIO_DEBOUNCE_TIME_1 (0x050 >> 2) 69 #define GPIO_DEBOUNCE_TIME_2 (0x054 >> 2) 70 #define GPIO_DEBOUNCE_TIME_3 (0x058 >> 2) 71 #define GPIO_ABCD_COMMAND_SRC_0 (0x060 >> 2) 72 #define GPIO_ABCD_COMMAND_SRC_1 (0x064 >> 2) 73 #define GPIO_EFGH_COMMAND_SRC_0 (0x068 >> 2) 74 #define GPIO_EFGH_COMMAND_SRC_1 (0x06C >> 2) 75 #define GPIO_IJKL_DATA_VALUE (0x070 >> 2) 76 #define GPIO_IJKL_DIRECTION (0x074 >> 2) 77 #define GPIO_MNOP_DATA_VALUE (0x078 >> 2) 78 #define GPIO_MNOP_DIRECTION (0x07C >> 2) 79 #define GPIO_QRST_DATA_VALUE (0x080 >> 2) 80 #define GPIO_QRST_DIRECTION (0x084 >> 2) 81 #define GPIO_UVWX_DATA_VALUE (0x088 >> 2) 82 #define GPIO_UVWX_DIRECTION (0x08C >> 2) 83 #define GPIO_IJKL_COMMAND_SRC_0 (0x090 >> 2) 84 #define GPIO_IJKL_COMMAND_SRC_1 (0x094 >> 2) 85 #define GPIO_IJKL_INT_ENABLE (0x098 >> 2) 86 #define GPIO_IJKL_INT_SENS_0 (0x09C >> 2) 87 #define GPIO_IJKL_INT_SENS_1 (0x0A0 >> 2) 88 #define GPIO_IJKL_INT_SENS_2 (0x0A4 >> 2) 89 #define GPIO_IJKL_INT_STATUS (0x0A8 >> 2) 90 #define GPIO_IJKL_RESET_TOLERANT (0x0AC >> 2) 91 #define GPIO_IJKL_DEBOUNCE_1 (0x0B0 >> 2) 92 #define GPIO_IJKL_DEBOUNCE_2 (0x0B4 >> 2) 93 #define GPIO_IJKL_INPUT_MASK (0x0B8 >> 2) 94 #define GPIO_ABCD_DATA_READ (0x0C0 >> 2) 95 #define GPIO_EFGH_DATA_READ (0x0C4 >> 2) 96 #define GPIO_IJKL_DATA_READ (0x0C8 >> 2) 97 #define GPIO_MNOP_DATA_READ (0x0CC >> 2) 98 #define GPIO_QRST_DATA_READ (0x0D0 >> 2) 99 #define GPIO_UVWX_DATA_READ (0x0D4 >> 2) 100 #define GPIO_YZAAAB_DATA_READ (0x0D8 >> 2) 101 #define GPIO_AC_DATA_READ (0x0DC >> 2) 102 #define GPIO_MNOP_COMMAND_SRC_0 (0x0E0 >> 2) 103 #define GPIO_MNOP_COMMAND_SRC_1 (0x0E4 >> 2) 104 #define GPIO_MNOP_INT_ENABLE (0x0E8 >> 2) 105 #define GPIO_MNOP_INT_SENS_0 (0x0EC >> 2) 106 #define GPIO_MNOP_INT_SENS_1 (0x0F0 >> 2) 107 #define GPIO_MNOP_INT_SENS_2 (0x0F4 >> 2) 108 #define GPIO_MNOP_INT_STATUS (0x0F8 >> 2) 109 #define GPIO_MNOP_RESET_TOLERANT (0x0FC >> 2) 110 #define GPIO_MNOP_DEBOUNCE_1 (0x100 >> 2) 111 #define GPIO_MNOP_DEBOUNCE_2 (0x104 >> 2) 112 #define GPIO_MNOP_INPUT_MASK (0x108 >> 2) 113 #define GPIO_QRST_COMMAND_SRC_0 (0x110 >> 2) 114 #define GPIO_QRST_COMMAND_SRC_1 (0x114 >> 2) 115 #define GPIO_QRST_INT_ENABLE (0x118 >> 2) 116 #define GPIO_QRST_INT_SENS_0 (0x11C >> 2) 117 #define GPIO_QRST_INT_SENS_1 (0x120 >> 2) 118 #define GPIO_QRST_INT_SENS_2 (0x124 >> 2) 119 #define GPIO_QRST_INT_STATUS (0x128 >> 2) 120 #define GPIO_QRST_RESET_TOLERANT (0x12C >> 2) 121 #define GPIO_QRST_DEBOUNCE_1 (0x130 >> 2) 122 #define GPIO_QRST_DEBOUNCE_2 (0x134 >> 2) 123 #define GPIO_QRST_INPUT_MASK (0x138 >> 2) 124 #define GPIO_UVWX_COMMAND_SRC_0 (0x140 >> 2) 125 #define GPIO_UVWX_COMMAND_SRC_1 (0x144 >> 2) 126 #define GPIO_UVWX_INT_ENABLE (0x148 >> 2) 127 #define GPIO_UVWX_INT_SENS_0 (0x14C >> 2) 128 #define GPIO_UVWX_INT_SENS_1 (0x150 >> 2) 129 #define GPIO_UVWX_INT_SENS_2 (0x154 >> 2) 130 #define GPIO_UVWX_INT_STATUS (0x158 >> 2) 131 #define GPIO_UVWX_RESET_TOLERANT (0x15C >> 2) 132 #define GPIO_UVWX_DEBOUNCE_1 (0x160 >> 2) 133 #define GPIO_UVWX_DEBOUNCE_2 (0x164 >> 2) 134 #define GPIO_UVWX_INPUT_MASK (0x168 >> 2) 135 #define GPIO_YZAAAB_COMMAND_SRC_0 (0x170 >> 2) 136 #define GPIO_YZAAAB_COMMAND_SRC_1 (0x174 >> 2) 137 #define GPIO_YZAAAB_INT_ENABLE (0x178 >> 2) 138 #define GPIO_YZAAAB_INT_SENS_0 (0x17C >> 2) 139 #define GPIO_YZAAAB_INT_SENS_1 (0x180 >> 2) 140 #define GPIO_YZAAAB_INT_SENS_2 (0x184 >> 2) 141 #define GPIO_YZAAAB_INT_STATUS (0x188 >> 2) 142 #define GPIO_YZAAAB_RESET_TOLERANT (0x18C >> 2) 143 #define GPIO_YZAAAB_DEBOUNCE_1 (0x190 >> 2) 144 #define GPIO_YZAAAB_DEBOUNCE_2 (0x194 >> 2) 145 #define GPIO_YZAAAB_INPUT_MASK (0x198 >> 2) 146 #define GPIO_AC_COMMAND_SRC_0 (0x1A0 >> 2) 147 #define GPIO_AC_COMMAND_SRC_1 (0x1A4 >> 2) 148 #define GPIO_AC_INT_ENABLE (0x1A8 >> 2) 149 #define GPIO_AC_INT_SENS_0 (0x1AC >> 2) 150 #define GPIO_AC_INT_SENS_1 (0x1B0 >> 2) 151 #define GPIO_AC_INT_SENS_2 (0x1B4 >> 2) 152 #define GPIO_AC_INT_STATUS (0x1B8 >> 2) 153 #define GPIO_AC_RESET_TOLERANT (0x1BC >> 2) 154 #define GPIO_AC_DEBOUNCE_1 (0x1C0 >> 2) 155 #define GPIO_AC_DEBOUNCE_2 (0x1C4 >> 2) 156 #define GPIO_AC_INPUT_MASK (0x1C8 >> 2) 157 #define GPIO_ABCD_INPUT_MASK (0x1D0 >> 2) 158 #define GPIO_EFGH_INPUT_MASK (0x1D4 >> 2) 159 #define GPIO_YZAAAB_DATA_VALUE (0x1E0 >> 2) 160 #define GPIO_YZAAAB_DIRECTION (0x1E4 >> 2) 161 #define GPIO_AC_DATA_VALUE (0x1E8 >> 2) 162 #define GPIO_AC_DIRECTION (0x1EC >> 2) 163 #define GPIO_3_3V_MEM_SIZE 0x1F0 164 #define GPIO_3_3V_REG_ARRAY_SIZE (GPIO_3_3V_MEM_SIZE >> 2) 165 166 /* AST2600 only - 1.8V gpios */ 167 /* 168 * The AST2600 two copies of the GPIO controller: the same 3.3V gpios as the 169 * AST2400 (memory offsets 0x0-0x198) and a second controller with 1.8V gpios 170 * (memory offsets 0x800-0x9D4). 171 */ 172 #define GPIO_1_8V_ABCD_DATA_VALUE (0x000 >> 2) 173 #define GPIO_1_8V_ABCD_DIRECTION (0x004 >> 2) 174 #define GPIO_1_8V_ABCD_INT_ENABLE (0x008 >> 2) 175 #define GPIO_1_8V_ABCD_INT_SENS_0 (0x00C >> 2) 176 #define GPIO_1_8V_ABCD_INT_SENS_1 (0x010 >> 2) 177 #define GPIO_1_8V_ABCD_INT_SENS_2 (0x014 >> 2) 178 #define GPIO_1_8V_ABCD_INT_STATUS (0x018 >> 2) 179 #define GPIO_1_8V_ABCD_RESET_TOLERANT (0x01C >> 2) 180 #define GPIO_1_8V_E_DATA_VALUE (0x020 >> 2) 181 #define GPIO_1_8V_E_DIRECTION (0x024 >> 2) 182 #define GPIO_1_8V_E_INT_ENABLE (0x028 >> 2) 183 #define GPIO_1_8V_E_INT_SENS_0 (0x02C >> 2) 184 #define GPIO_1_8V_E_INT_SENS_1 (0x030 >> 2) 185 #define GPIO_1_8V_E_INT_SENS_2 (0x034 >> 2) 186 #define GPIO_1_8V_E_INT_STATUS (0x038 >> 2) 187 #define GPIO_1_8V_E_RESET_TOLERANT (0x03C >> 2) 188 #define GPIO_1_8V_ABCD_DEBOUNCE_1 (0x040 >> 2) 189 #define GPIO_1_8V_ABCD_DEBOUNCE_2 (0x044 >> 2) 190 #define GPIO_1_8V_E_DEBOUNCE_1 (0x048 >> 2) 191 #define GPIO_1_8V_E_DEBOUNCE_2 (0x04C >> 2) 192 #define GPIO_1_8V_DEBOUNCE_TIME_1 (0x050 >> 2) 193 #define GPIO_1_8V_DEBOUNCE_TIME_2 (0x054 >> 2) 194 #define GPIO_1_8V_DEBOUNCE_TIME_3 (0x058 >> 2) 195 #define GPIO_1_8V_ABCD_COMMAND_SRC_0 (0x060 >> 2) 196 #define GPIO_1_8V_ABCD_COMMAND_SRC_1 (0x064 >> 2) 197 #define GPIO_1_8V_E_COMMAND_SRC_0 (0x068 >> 2) 198 #define GPIO_1_8V_E_COMMAND_SRC_1 (0x06C >> 2) 199 #define GPIO_1_8V_ABCD_DATA_READ (0x0C0 >> 2) 200 #define GPIO_1_8V_E_DATA_READ (0x0C4 >> 2) 201 #define GPIO_1_8V_ABCD_INPUT_MASK (0x1D0 >> 2) 202 #define GPIO_1_8V_E_INPUT_MASK (0x1D4 >> 2) 203 #define GPIO_1_8V_MEM_SIZE 0x1D8 204 #define GPIO_1_8V_REG_ARRAY_SIZE (GPIO_1_8V_MEM_SIZE >> 2) 205 206 static int aspeed_evaluate_irq(GPIOSets *regs, int gpio_prev_high, int gpio) 207 { 208 uint32_t falling_edge = 0, rising_edge = 0; 209 uint32_t int_trigger = extract32(regs->int_sens_0, gpio, 1) 210 | extract32(regs->int_sens_1, gpio, 1) << 1 211 | extract32(regs->int_sens_2, gpio, 1) << 2; 212 uint32_t gpio_curr_high = extract32(regs->data_value, gpio, 1); 213 uint32_t gpio_int_enabled = extract32(regs->int_enable, gpio, 1); 214 215 if (!gpio_int_enabled) { 216 return 0; 217 } 218 219 /* Detect edges */ 220 if (gpio_curr_high && !gpio_prev_high) { 221 rising_edge = 1; 222 } else if (!gpio_curr_high && gpio_prev_high) { 223 falling_edge = 1; 224 } 225 226 if (((int_trigger == ASPEED_FALLING_EDGE) && falling_edge) || 227 ((int_trigger == ASPEED_RISING_EDGE) && rising_edge) || 228 ((int_trigger == ASPEED_LEVEL_LOW) && !gpio_curr_high) || 229 ((int_trigger == ASPEED_LEVEL_HIGH) && gpio_curr_high) || 230 ((int_trigger >= ASPEED_DUAL_EDGE) && (rising_edge || falling_edge))) 231 { 232 regs->int_status = deposit32(regs->int_status, gpio, 1, 1); 233 return 1; 234 } 235 return 0; 236 } 237 238 #define nested_struct_index(ta, pa, m, tb, pb) \ 239 (pb - ((tb *)(((char *)pa) + offsetof(ta, m)))) 240 241 static ptrdiff_t aspeed_gpio_set_idx(AspeedGPIOState *s, GPIOSets *regs) 242 { 243 return nested_struct_index(AspeedGPIOState, s, sets, GPIOSets, regs); 244 } 245 246 static void aspeed_gpio_update(AspeedGPIOState *s, GPIOSets *regs, 247 uint32_t value) 248 { 249 uint32_t input_mask = regs->input_mask; 250 uint32_t direction = regs->direction; 251 uint32_t old = regs->data_value; 252 uint32_t new = value; 253 uint32_t diff; 254 int gpio; 255 256 diff = old ^ new; 257 if (diff) { 258 for (gpio = 0; gpio < ASPEED_GPIOS_PER_SET; gpio++) { 259 uint32_t mask = 1 << gpio; 260 261 /* If the gpio needs to be updated... */ 262 if (!(diff & mask)) { 263 continue; 264 } 265 266 /* ...and we're output or not input-masked... */ 267 if (!(direction & mask) && (input_mask & mask)) { 268 continue; 269 } 270 271 /* ...then update the state. */ 272 if (mask & new) { 273 regs->data_value |= mask; 274 } else { 275 regs->data_value &= ~mask; 276 } 277 278 /* If the gpio is set to output... */ 279 if (direction & mask) { 280 /* ...trigger the line-state IRQ */ 281 ptrdiff_t set = aspeed_gpio_set_idx(s, regs); 282 qemu_set_irq(s->gpios[set][gpio], !!(new & mask)); 283 } else { 284 /* ...otherwise if we meet the line's current IRQ policy... */ 285 if (aspeed_evaluate_irq(regs, old & mask, gpio)) { 286 /* ...trigger the VIC IRQ */ 287 s->pending++; 288 } 289 } 290 } 291 } 292 qemu_set_irq(s->irq, !!(s->pending)); 293 } 294 295 static bool aspeed_gpio_get_pin_level(AspeedGPIOState *s, uint32_t set_idx, 296 uint32_t pin) 297 { 298 uint32_t reg_val; 299 uint32_t pin_mask = 1 << pin; 300 301 reg_val = s->sets[set_idx].data_value; 302 303 return !!(reg_val & pin_mask); 304 } 305 306 static void aspeed_gpio_set_pin_level(AspeedGPIOState *s, uint32_t set_idx, 307 uint32_t pin, bool level) 308 { 309 uint32_t value = s->sets[set_idx].data_value; 310 uint32_t pin_mask = 1 << pin; 311 312 if (level) { 313 value |= pin_mask; 314 } else { 315 value &= !pin_mask; 316 } 317 318 aspeed_gpio_update(s, &s->sets[set_idx], value); 319 } 320 321 /* 322 * | src_1 | src_2 | source | 323 * |-----------------------------| 324 * | 0 | 0 | ARM | 325 * | 0 | 1 | LPC | 326 * | 1 | 0 | Coprocessor| 327 * | 1 | 1 | Reserved | 328 * 329 * Once the source of a set is programmed, corresponding bits in the 330 * data_value, direction, interrupt [enable, sens[0-2]], reset_tol and 331 * debounce registers can only be written by the source. 332 * 333 * Source is ARM by default 334 * only bits 24, 16, 8, and 0 can be set 335 * 336 * we don't currently have a model for the LPC or Coprocessor 337 */ 338 static uint32_t update_value_control_source(GPIOSets *regs, uint32_t old_value, 339 uint32_t value) 340 { 341 int i; 342 int cmd_source; 343 344 /* assume the source is always ARM for now */ 345 int source = ASPEED_SOURCE_ARM; 346 347 uint32_t new_value = 0; 348 349 /* for each group in set */ 350 for (i = 0; i < ASPEED_GPIOS_PER_SET; i += GPIOS_PER_GROUP) { 351 cmd_source = extract32(regs->cmd_source_0, i, 1) 352 | (extract32(regs->cmd_source_1, i, 1) << 1); 353 354 if (source == cmd_source) { 355 new_value |= (0xff << i) & value; 356 } else { 357 new_value |= (0xff << i) & old_value; 358 } 359 } 360 return new_value; 361 } 362 363 static const AspeedGPIOReg aspeed_3_3v_gpios[GPIO_3_3V_REG_ARRAY_SIZE] = { 364 /* Set ABCD */ 365 [GPIO_ABCD_DATA_VALUE] = { 0, gpio_reg_data_value }, 366 [GPIO_ABCD_DIRECTION] = { 0, gpio_reg_direction }, 367 [GPIO_ABCD_INT_ENABLE] = { 0, gpio_reg_int_enable }, 368 [GPIO_ABCD_INT_SENS_0] = { 0, gpio_reg_int_sens_0 }, 369 [GPIO_ABCD_INT_SENS_1] = { 0, gpio_reg_int_sens_1 }, 370 [GPIO_ABCD_INT_SENS_2] = { 0, gpio_reg_int_sens_2 }, 371 [GPIO_ABCD_INT_STATUS] = { 0, gpio_reg_int_status }, 372 [GPIO_ABCD_RESET_TOLERANT] = { 0, gpio_reg_reset_tolerant }, 373 [GPIO_ABCD_DEBOUNCE_1] = { 0, gpio_reg_debounce_1 }, 374 [GPIO_ABCD_DEBOUNCE_2] = { 0, gpio_reg_debounce_2 }, 375 [GPIO_ABCD_COMMAND_SRC_0] = { 0, gpio_reg_cmd_source_0 }, 376 [GPIO_ABCD_COMMAND_SRC_1] = { 0, gpio_reg_cmd_source_1 }, 377 [GPIO_ABCD_DATA_READ] = { 0, gpio_reg_data_read }, 378 [GPIO_ABCD_INPUT_MASK] = { 0, gpio_reg_input_mask }, 379 /* Set EFGH */ 380 [GPIO_EFGH_DATA_VALUE] = { 1, gpio_reg_data_value }, 381 [GPIO_EFGH_DIRECTION] = { 1, gpio_reg_direction }, 382 [GPIO_EFGH_INT_ENABLE] = { 1, gpio_reg_int_enable }, 383 [GPIO_EFGH_INT_SENS_0] = { 1, gpio_reg_int_sens_0 }, 384 [GPIO_EFGH_INT_SENS_1] = { 1, gpio_reg_int_sens_1 }, 385 [GPIO_EFGH_INT_SENS_2] = { 1, gpio_reg_int_sens_2 }, 386 [GPIO_EFGH_INT_STATUS] = { 1, gpio_reg_int_status }, 387 [GPIO_EFGH_RESET_TOLERANT] = { 1, gpio_reg_reset_tolerant }, 388 [GPIO_EFGH_DEBOUNCE_1] = { 1, gpio_reg_debounce_1 }, 389 [GPIO_EFGH_DEBOUNCE_2] = { 1, gpio_reg_debounce_2 }, 390 [GPIO_EFGH_COMMAND_SRC_0] = { 1, gpio_reg_cmd_source_0 }, 391 [GPIO_EFGH_COMMAND_SRC_1] = { 1, gpio_reg_cmd_source_1 }, 392 [GPIO_EFGH_DATA_READ] = { 1, gpio_reg_data_read }, 393 [GPIO_EFGH_INPUT_MASK] = { 1, gpio_reg_input_mask }, 394 /* Set IJKL */ 395 [GPIO_IJKL_DATA_VALUE] = { 2, gpio_reg_data_value }, 396 [GPIO_IJKL_DIRECTION] = { 2, gpio_reg_direction }, 397 [GPIO_IJKL_INT_ENABLE] = { 2, gpio_reg_int_enable }, 398 [GPIO_IJKL_INT_SENS_0] = { 2, gpio_reg_int_sens_0 }, 399 [GPIO_IJKL_INT_SENS_1] = { 2, gpio_reg_int_sens_1 }, 400 [GPIO_IJKL_INT_SENS_2] = { 2, gpio_reg_int_sens_2 }, 401 [GPIO_IJKL_INT_STATUS] = { 2, gpio_reg_int_status }, 402 [GPIO_IJKL_RESET_TOLERANT] = { 2, gpio_reg_reset_tolerant }, 403 [GPIO_IJKL_DEBOUNCE_1] = { 2, gpio_reg_debounce_1 }, 404 [GPIO_IJKL_DEBOUNCE_2] = { 2, gpio_reg_debounce_2 }, 405 [GPIO_IJKL_COMMAND_SRC_0] = { 2, gpio_reg_cmd_source_0 }, 406 [GPIO_IJKL_COMMAND_SRC_1] = { 2, gpio_reg_cmd_source_1 }, 407 [GPIO_IJKL_DATA_READ] = { 2, gpio_reg_data_read }, 408 [GPIO_IJKL_INPUT_MASK] = { 2, gpio_reg_input_mask }, 409 /* Set MNOP */ 410 [GPIO_MNOP_DATA_VALUE] = { 3, gpio_reg_data_value }, 411 [GPIO_MNOP_DIRECTION] = { 3, gpio_reg_direction }, 412 [GPIO_MNOP_INT_ENABLE] = { 3, gpio_reg_int_enable }, 413 [GPIO_MNOP_INT_SENS_0] = { 3, gpio_reg_int_sens_0 }, 414 [GPIO_MNOP_INT_SENS_1] = { 3, gpio_reg_int_sens_1 }, 415 [GPIO_MNOP_INT_SENS_2] = { 3, gpio_reg_int_sens_2 }, 416 [GPIO_MNOP_INT_STATUS] = { 3, gpio_reg_int_status }, 417 [GPIO_MNOP_RESET_TOLERANT] = { 3, gpio_reg_reset_tolerant }, 418 [GPIO_MNOP_DEBOUNCE_1] = { 3, gpio_reg_debounce_1 }, 419 [GPIO_MNOP_DEBOUNCE_2] = { 3, gpio_reg_debounce_2 }, 420 [GPIO_MNOP_COMMAND_SRC_0] = { 3, gpio_reg_cmd_source_0 }, 421 [GPIO_MNOP_COMMAND_SRC_1] = { 3, gpio_reg_cmd_source_1 }, 422 [GPIO_MNOP_DATA_READ] = { 3, gpio_reg_data_read }, 423 [GPIO_MNOP_INPUT_MASK] = { 3, gpio_reg_input_mask }, 424 /* Set QRST */ 425 [GPIO_QRST_DATA_VALUE] = { 4, gpio_reg_data_value }, 426 [GPIO_QRST_DIRECTION] = { 4, gpio_reg_direction }, 427 [GPIO_QRST_INT_ENABLE] = { 4, gpio_reg_int_enable }, 428 [GPIO_QRST_INT_SENS_0] = { 4, gpio_reg_int_sens_0 }, 429 [GPIO_QRST_INT_SENS_1] = { 4, gpio_reg_int_sens_1 }, 430 [GPIO_QRST_INT_SENS_2] = { 4, gpio_reg_int_sens_2 }, 431 [GPIO_QRST_INT_STATUS] = { 4, gpio_reg_int_status }, 432 [GPIO_QRST_RESET_TOLERANT] = { 4, gpio_reg_reset_tolerant }, 433 [GPIO_QRST_DEBOUNCE_1] = { 4, gpio_reg_debounce_1 }, 434 [GPIO_QRST_DEBOUNCE_2] = { 4, gpio_reg_debounce_2 }, 435 [GPIO_QRST_COMMAND_SRC_0] = { 4, gpio_reg_cmd_source_0 }, 436 [GPIO_QRST_COMMAND_SRC_1] = { 4, gpio_reg_cmd_source_1 }, 437 [GPIO_QRST_DATA_READ] = { 4, gpio_reg_data_read }, 438 [GPIO_QRST_INPUT_MASK] = { 4, gpio_reg_input_mask }, 439 /* Set UVWX */ 440 [GPIO_UVWX_DATA_VALUE] = { 5, gpio_reg_data_value }, 441 [GPIO_UVWX_DIRECTION] = { 5, gpio_reg_direction }, 442 [GPIO_UVWX_INT_ENABLE] = { 5, gpio_reg_int_enable }, 443 [GPIO_UVWX_INT_SENS_0] = { 5, gpio_reg_int_sens_0 }, 444 [GPIO_UVWX_INT_SENS_1] = { 5, gpio_reg_int_sens_1 }, 445 [GPIO_UVWX_INT_SENS_2] = { 5, gpio_reg_int_sens_2 }, 446 [GPIO_UVWX_INT_STATUS] = { 5, gpio_reg_int_status }, 447 [GPIO_UVWX_RESET_TOLERANT] = { 5, gpio_reg_reset_tolerant }, 448 [GPIO_UVWX_DEBOUNCE_1] = { 5, gpio_reg_debounce_1 }, 449 [GPIO_UVWX_DEBOUNCE_2] = { 5, gpio_reg_debounce_2 }, 450 [GPIO_UVWX_COMMAND_SRC_0] = { 5, gpio_reg_cmd_source_0 }, 451 [GPIO_UVWX_COMMAND_SRC_1] = { 5, gpio_reg_cmd_source_1 }, 452 [GPIO_UVWX_DATA_READ] = { 5, gpio_reg_data_read }, 453 [GPIO_UVWX_INPUT_MASK] = { 5, gpio_reg_input_mask }, 454 /* Set YZAAAB */ 455 [GPIO_YZAAAB_DATA_VALUE] = { 6, gpio_reg_data_value }, 456 [GPIO_YZAAAB_DIRECTION] = { 6, gpio_reg_direction }, 457 [GPIO_YZAAAB_INT_ENABLE] = { 6, gpio_reg_int_enable }, 458 [GPIO_YZAAAB_INT_SENS_0] = { 6, gpio_reg_int_sens_0 }, 459 [GPIO_YZAAAB_INT_SENS_1] = { 6, gpio_reg_int_sens_1 }, 460 [GPIO_YZAAAB_INT_SENS_2] = { 6, gpio_reg_int_sens_2 }, 461 [GPIO_YZAAAB_INT_STATUS] = { 6, gpio_reg_int_status }, 462 [GPIO_YZAAAB_RESET_TOLERANT] = { 6, gpio_reg_reset_tolerant }, 463 [GPIO_YZAAAB_DEBOUNCE_1] = { 6, gpio_reg_debounce_1 }, 464 [GPIO_YZAAAB_DEBOUNCE_2] = { 6, gpio_reg_debounce_2 }, 465 [GPIO_YZAAAB_COMMAND_SRC_0] = { 6, gpio_reg_cmd_source_0 }, 466 [GPIO_YZAAAB_COMMAND_SRC_1] = { 6, gpio_reg_cmd_source_1 }, 467 [GPIO_YZAAAB_DATA_READ] = { 6, gpio_reg_data_read }, 468 [GPIO_YZAAAB_INPUT_MASK] = { 6, gpio_reg_input_mask }, 469 /* Set AC (ast2500 only) */ 470 [GPIO_AC_DATA_VALUE] = { 7, gpio_reg_data_value }, 471 [GPIO_AC_DIRECTION] = { 7, gpio_reg_direction }, 472 [GPIO_AC_INT_ENABLE] = { 7, gpio_reg_int_enable }, 473 [GPIO_AC_INT_SENS_0] = { 7, gpio_reg_int_sens_0 }, 474 [GPIO_AC_INT_SENS_1] = { 7, gpio_reg_int_sens_1 }, 475 [GPIO_AC_INT_SENS_2] = { 7, gpio_reg_int_sens_2 }, 476 [GPIO_AC_INT_STATUS] = { 7, gpio_reg_int_status }, 477 [GPIO_AC_RESET_TOLERANT] = { 7, gpio_reg_reset_tolerant }, 478 [GPIO_AC_DEBOUNCE_1] = { 7, gpio_reg_debounce_1 }, 479 [GPIO_AC_DEBOUNCE_2] = { 7, gpio_reg_debounce_2 }, 480 [GPIO_AC_COMMAND_SRC_0] = { 7, gpio_reg_cmd_source_0 }, 481 [GPIO_AC_COMMAND_SRC_1] = { 7, gpio_reg_cmd_source_1 }, 482 [GPIO_AC_DATA_READ] = { 7, gpio_reg_data_read }, 483 [GPIO_AC_INPUT_MASK] = { 7, gpio_reg_input_mask }, 484 }; 485 486 static const AspeedGPIOReg aspeed_1_8v_gpios[GPIO_1_8V_REG_ARRAY_SIZE] = { 487 /* 1.8V Set ABCD */ 488 [GPIO_1_8V_ABCD_DATA_VALUE] = {0, gpio_reg_data_value}, 489 [GPIO_1_8V_ABCD_DIRECTION] = {0, gpio_reg_direction}, 490 [GPIO_1_8V_ABCD_INT_ENABLE] = {0, gpio_reg_int_enable}, 491 [GPIO_1_8V_ABCD_INT_SENS_0] = {0, gpio_reg_int_sens_0}, 492 [GPIO_1_8V_ABCD_INT_SENS_1] = {0, gpio_reg_int_sens_1}, 493 [GPIO_1_8V_ABCD_INT_SENS_2] = {0, gpio_reg_int_sens_2}, 494 [GPIO_1_8V_ABCD_INT_STATUS] = {0, gpio_reg_int_status}, 495 [GPIO_1_8V_ABCD_RESET_TOLERANT] = {0, gpio_reg_reset_tolerant}, 496 [GPIO_1_8V_ABCD_DEBOUNCE_1] = {0, gpio_reg_debounce_1}, 497 [GPIO_1_8V_ABCD_DEBOUNCE_2] = {0, gpio_reg_debounce_2}, 498 [GPIO_1_8V_ABCD_COMMAND_SRC_0] = {0, gpio_reg_cmd_source_0}, 499 [GPIO_1_8V_ABCD_COMMAND_SRC_1] = {0, gpio_reg_cmd_source_1}, 500 [GPIO_1_8V_ABCD_DATA_READ] = {0, gpio_reg_data_read}, 501 [GPIO_1_8V_ABCD_INPUT_MASK] = {0, gpio_reg_input_mask}, 502 /* 1.8V Set E */ 503 [GPIO_1_8V_E_DATA_VALUE] = {1, gpio_reg_data_value}, 504 [GPIO_1_8V_E_DIRECTION] = {1, gpio_reg_direction}, 505 [GPIO_1_8V_E_INT_ENABLE] = {1, gpio_reg_int_enable}, 506 [GPIO_1_8V_E_INT_SENS_0] = {1, gpio_reg_int_sens_0}, 507 [GPIO_1_8V_E_INT_SENS_1] = {1, gpio_reg_int_sens_1}, 508 [GPIO_1_8V_E_INT_SENS_2] = {1, gpio_reg_int_sens_2}, 509 [GPIO_1_8V_E_INT_STATUS] = {1, gpio_reg_int_status}, 510 [GPIO_1_8V_E_RESET_TOLERANT] = {1, gpio_reg_reset_tolerant}, 511 [GPIO_1_8V_E_DEBOUNCE_1] = {1, gpio_reg_debounce_1}, 512 [GPIO_1_8V_E_DEBOUNCE_2] = {1, gpio_reg_debounce_2}, 513 [GPIO_1_8V_E_COMMAND_SRC_0] = {1, gpio_reg_cmd_source_0}, 514 [GPIO_1_8V_E_COMMAND_SRC_1] = {1, gpio_reg_cmd_source_1}, 515 [GPIO_1_8V_E_DATA_READ] = {1, gpio_reg_data_read}, 516 [GPIO_1_8V_E_INPUT_MASK] = {1, gpio_reg_input_mask}, 517 }; 518 519 static uint64_t aspeed_gpio_read(void *opaque, hwaddr offset, uint32_t size) 520 { 521 AspeedGPIOState *s = ASPEED_GPIO(opaque); 522 AspeedGPIOClass *agc = ASPEED_GPIO_GET_CLASS(s); 523 uint64_t idx = -1; 524 const AspeedGPIOReg *reg; 525 GPIOSets *set; 526 527 idx = offset >> 2; 528 if (idx >= GPIO_DEBOUNCE_TIME_1 && idx <= GPIO_DEBOUNCE_TIME_3) { 529 idx -= GPIO_DEBOUNCE_TIME_1; 530 return (uint64_t) s->debounce_regs[idx]; 531 } 532 533 reg = &agc->reg_table[idx]; 534 if (reg->set_idx >= agc->nr_gpio_sets) { 535 qemu_log_mask(LOG_GUEST_ERROR, "%s: no getter for offset 0x%" 536 HWADDR_PRIx"\n", __func__, offset); 537 return 0; 538 } 539 540 set = &s->sets[reg->set_idx]; 541 switch (reg->type) { 542 case gpio_reg_data_value: 543 return set->data_value; 544 case gpio_reg_direction: 545 return set->direction; 546 case gpio_reg_int_enable: 547 return set->int_enable; 548 case gpio_reg_int_sens_0: 549 return set->int_sens_0; 550 case gpio_reg_int_sens_1: 551 return set->int_sens_1; 552 case gpio_reg_int_sens_2: 553 return set->int_sens_2; 554 case gpio_reg_int_status: 555 return set->int_status; 556 case gpio_reg_reset_tolerant: 557 return set->reset_tol; 558 case gpio_reg_debounce_1: 559 return set->debounce_1; 560 case gpio_reg_debounce_2: 561 return set->debounce_2; 562 case gpio_reg_cmd_source_0: 563 return set->cmd_source_0; 564 case gpio_reg_cmd_source_1: 565 return set->cmd_source_1; 566 case gpio_reg_data_read: 567 return set->data_read; 568 case gpio_reg_input_mask: 569 return set->input_mask; 570 default: 571 qemu_log_mask(LOG_GUEST_ERROR, "%s: no getter for offset 0x%" 572 HWADDR_PRIx"\n", __func__, offset); 573 return 0; 574 }; 575 } 576 577 static void aspeed_gpio_write(void *opaque, hwaddr offset, uint64_t data, 578 uint32_t size) 579 { 580 AspeedGPIOState *s = ASPEED_GPIO(opaque); 581 AspeedGPIOClass *agc = ASPEED_GPIO_GET_CLASS(s); 582 const GPIOSetProperties *props; 583 uint64_t idx = -1; 584 const AspeedGPIOReg *reg; 585 GPIOSets *set; 586 uint32_t cleared; 587 588 idx = offset >> 2; 589 if (idx >= GPIO_DEBOUNCE_TIME_1 && idx <= GPIO_DEBOUNCE_TIME_3) { 590 idx -= GPIO_DEBOUNCE_TIME_1; 591 s->debounce_regs[idx] = (uint32_t) data; 592 return; 593 } 594 595 reg = &agc->reg_table[idx]; 596 if (reg->set_idx >= agc->nr_gpio_sets) { 597 qemu_log_mask(LOG_GUEST_ERROR, "%s: no setter for offset 0x%" 598 HWADDR_PRIx"\n", __func__, offset); 599 return; 600 } 601 602 set = &s->sets[reg->set_idx]; 603 props = &agc->props[reg->set_idx]; 604 605 switch (reg->type) { 606 case gpio_reg_data_value: 607 data &= props->output; 608 data = update_value_control_source(set, set->data_value, data); 609 set->data_read = data; 610 aspeed_gpio_update(s, set, data); 611 return; 612 case gpio_reg_direction: 613 /* 614 * where data is the value attempted to be written to the pin: 615 * pin type | input mask | output mask | expected value 616 * ------------------------------------------------------------ 617 * bidirectional | 1 | 1 | data 618 * input only | 1 | 0 | 0 619 * output only | 0 | 1 | 1 620 * no pin | 0 | 0 | 0 621 * 622 * which is captured by: 623 * data = ( data | ~input) & output; 624 */ 625 data = (data | ~props->input) & props->output; 626 set->direction = update_value_control_source(set, set->direction, data); 627 break; 628 case gpio_reg_int_enable: 629 set->int_enable = update_value_control_source(set, set->int_enable, 630 data); 631 break; 632 case gpio_reg_int_sens_0: 633 set->int_sens_0 = update_value_control_source(set, set->int_sens_0, 634 data); 635 break; 636 case gpio_reg_int_sens_1: 637 set->int_sens_1 = update_value_control_source(set, set->int_sens_1, 638 data); 639 break; 640 case gpio_reg_int_sens_2: 641 set->int_sens_2 = update_value_control_source(set, set->int_sens_2, 642 data); 643 break; 644 case gpio_reg_int_status: 645 cleared = ctpop32(data & set->int_status); 646 if (s->pending && cleared) { 647 assert(s->pending >= cleared); 648 s->pending -= cleared; 649 } 650 set->int_status &= ~data; 651 break; 652 case gpio_reg_reset_tolerant: 653 set->reset_tol = update_value_control_source(set, set->reset_tol, 654 data); 655 return; 656 case gpio_reg_debounce_1: 657 set->debounce_1 = update_value_control_source(set, set->debounce_1, 658 data); 659 return; 660 case gpio_reg_debounce_2: 661 set->debounce_2 = update_value_control_source(set, set->debounce_2, 662 data); 663 return; 664 case gpio_reg_cmd_source_0: 665 set->cmd_source_0 = data & ASPEED_CMD_SRC_MASK; 666 return; 667 case gpio_reg_cmd_source_1: 668 set->cmd_source_1 = data & ASPEED_CMD_SRC_MASK; 669 return; 670 case gpio_reg_data_read: 671 /* Read only register */ 672 return; 673 case gpio_reg_input_mask: 674 /* 675 * feeds into interrupt generation 676 * 0: read from data value reg will be updated 677 * 1: read from data value reg will not be updated 678 */ 679 set->input_mask = data & props->input; 680 break; 681 default: 682 qemu_log_mask(LOG_GUEST_ERROR, "%s: no setter for offset 0x%" 683 HWADDR_PRIx"\n", __func__, offset); 684 return; 685 } 686 aspeed_gpio_update(s, set, set->data_value); 687 return; 688 } 689 690 static int get_set_idx(AspeedGPIOState *s, const char *group, int *group_idx) 691 { 692 AspeedGPIOClass *agc = ASPEED_GPIO_GET_CLASS(s); 693 int set_idx, g_idx; 694 695 for (set_idx = 0; set_idx < agc->nr_gpio_sets; set_idx++) { 696 const GPIOSetProperties *set_props = &agc->props[set_idx]; 697 for (g_idx = 0; g_idx < ASPEED_GROUPS_PER_SET; g_idx++) { 698 if (!strncmp(group, set_props->group_label[g_idx], strlen(group))) { 699 *group_idx = g_idx; 700 return set_idx; 701 } 702 } 703 } 704 return -1; 705 } 706 707 static void aspeed_gpio_get_pin(Object *obj, Visitor *v, const char *name, 708 void *opaque, Error **errp) 709 { 710 int pin = 0xfff; 711 bool level = true; 712 char group[4]; 713 AspeedGPIOState *s = ASPEED_GPIO(obj); 714 int set_idx, group_idx = 0; 715 716 if (sscanf(name, "gpio%2[A-Z]%1d", group, &pin) != 2) { 717 /* 1.8V gpio */ 718 if (sscanf(name, "gpio%3[18A-E]%1d", group, &pin) != 2) { 719 error_setg(errp, "%s: error reading %s", __func__, name); 720 return; 721 } 722 } 723 set_idx = get_set_idx(s, group, &group_idx); 724 if (set_idx == -1) { 725 error_setg(errp, "%s: invalid group %s", __func__, group); 726 return; 727 } 728 pin = pin + group_idx * GPIOS_PER_GROUP; 729 level = aspeed_gpio_get_pin_level(s, set_idx, pin); 730 visit_type_bool(v, name, &level, errp); 731 } 732 733 static void aspeed_gpio_set_pin(Object *obj, Visitor *v, const char *name, 734 void *opaque, Error **errp) 735 { 736 bool level; 737 int pin = 0xfff; 738 char group[4]; 739 AspeedGPIOState *s = ASPEED_GPIO(obj); 740 int set_idx, group_idx = 0; 741 742 if (!visit_type_bool(v, name, &level, errp)) { 743 return; 744 } 745 if (sscanf(name, "gpio%2[A-Z]%1d", group, &pin) != 2) { 746 /* 1.8V gpio */ 747 if (sscanf(name, "gpio%3[18A-E]%1d", group, &pin) != 2) { 748 error_setg(errp, "%s: error reading %s", __func__, name); 749 return; 750 } 751 } 752 set_idx = get_set_idx(s, group, &group_idx); 753 if (set_idx == -1) { 754 error_setg(errp, "%s: invalid group %s", __func__, group); 755 return; 756 } 757 pin = pin + group_idx * GPIOS_PER_GROUP; 758 aspeed_gpio_set_pin_level(s, set_idx, pin, level); 759 } 760 761 /****************** Setup functions ******************/ 762 static const GPIOSetProperties ast2400_set_props[ASPEED_GPIO_MAX_NR_SETS] = { 763 [0] = {0xffffffff, 0xffffffff, {"A", "B", "C", "D"} }, 764 [1] = {0xffffffff, 0xffffffff, {"E", "F", "G", "H"} }, 765 [2] = {0xffffffff, 0xffffffff, {"I", "J", "K", "L"} }, 766 [3] = {0xffffffff, 0xffffffff, {"M", "N", "O", "P"} }, 767 [4] = {0xffffffff, 0xffffffff, {"Q", "R", "S", "T"} }, 768 [5] = {0xffffffff, 0x0000ffff, {"U", "V", "W", "X"} }, 769 [6] = {0x0000000f, 0x0fffff0f, {"Y", "Z", "AA", "AB"} }, 770 }; 771 772 static const GPIOSetProperties ast2500_set_props[ASPEED_GPIO_MAX_NR_SETS] = { 773 [0] = {0xffffffff, 0xffffffff, {"A", "B", "C", "D"} }, 774 [1] = {0xffffffff, 0xffffffff, {"E", "F", "G", "H"} }, 775 [2] = {0xffffffff, 0xffffffff, {"I", "J", "K", "L"} }, 776 [3] = {0xffffffff, 0xffffffff, {"M", "N", "O", "P"} }, 777 [4] = {0xffffffff, 0xffffffff, {"Q", "R", "S", "T"} }, 778 [5] = {0xffffffff, 0x0000ffff, {"U", "V", "W", "X"} }, 779 [6] = {0x0fffffff, 0x0fffffff, {"Y", "Z", "AA", "AB"} }, 780 [7] = {0x000000ff, 0x000000ff, {"AC"} }, 781 }; 782 783 static GPIOSetProperties ast2600_3_3v_set_props[ASPEED_GPIO_MAX_NR_SETS] = { 784 [0] = {0xffffffff, 0xffffffff, {"A", "B", "C", "D"} }, 785 [1] = {0xffffffff, 0xffffffff, {"E", "F", "G", "H"} }, 786 [2] = {0xffffffff, 0xffffffff, {"I", "J", "K", "L"} }, 787 [3] = {0xffffffff, 0xffffffff, {"M", "N", "O", "P"} }, 788 [4] = {0xffffffff, 0x00ffffff, {"Q", "R", "S", "T"} }, 789 [5] = {0xffffffff, 0xffffff00, {"U", "V", "W", "X"} }, 790 [6] = {0x0000ffff, 0x0000ffff, {"Y", "Z"} }, 791 }; 792 793 static GPIOSetProperties ast2600_1_8v_set_props[ASPEED_GPIO_MAX_NR_SETS] = { 794 [0] = {0xffffffff, 0xffffffff, {"18A", "18B", "18C", "18D"} }, 795 [1] = {0x0000000f, 0x0000000f, {"18E"} }, 796 }; 797 798 static const MemoryRegionOps aspeed_gpio_ops = { 799 .read = aspeed_gpio_read, 800 .write = aspeed_gpio_write, 801 .endianness = DEVICE_LITTLE_ENDIAN, 802 .valid.min_access_size = 4, 803 .valid.max_access_size = 4, 804 }; 805 806 static void aspeed_gpio_reset(DeviceState *dev) 807 { 808 AspeedGPIOState *s = ASPEED_GPIO(dev); 809 810 /* TODO: respect the reset tolerance registers */ 811 memset(s->sets, 0, sizeof(s->sets)); 812 } 813 814 static void aspeed_gpio_realize(DeviceState *dev, Error **errp) 815 { 816 AspeedGPIOState *s = ASPEED_GPIO(dev); 817 SysBusDevice *sbd = SYS_BUS_DEVICE(dev); 818 AspeedGPIOClass *agc = ASPEED_GPIO_GET_CLASS(s); 819 820 /* Interrupt parent line */ 821 sysbus_init_irq(sbd, &s->irq); 822 823 /* Individual GPIOs */ 824 for (int i = 0; i < ASPEED_GPIO_MAX_NR_SETS; i++) { 825 const GPIOSetProperties *props = &agc->props[i]; 826 uint32_t skip = ~(props->input | props->output); 827 for (int j = 0; j < ASPEED_GPIOS_PER_SET; j++) { 828 if (skip >> j & 1) { 829 continue; 830 } 831 sysbus_init_irq(sbd, &s->gpios[i][j]); 832 } 833 } 834 835 memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_gpio_ops, s, 836 TYPE_ASPEED_GPIO, 0x800); 837 838 sysbus_init_mmio(sbd, &s->iomem); 839 } 840 841 static void aspeed_gpio_init(Object *obj) 842 { 843 AspeedGPIOState *s = ASPEED_GPIO(obj); 844 AspeedGPIOClass *agc = ASPEED_GPIO_GET_CLASS(s); 845 846 for (int i = 0; i < ASPEED_GPIO_MAX_NR_SETS; i++) { 847 const GPIOSetProperties *props = &agc->props[i]; 848 uint32_t skip = ~(props->input | props->output); 849 for (int j = 0; j < ASPEED_GPIOS_PER_SET; j++) { 850 if (skip >> j & 1) { 851 continue; 852 } 853 int group_idx = j / GPIOS_PER_GROUP; 854 int pin_idx = j % GPIOS_PER_GROUP; 855 const char *group = &props->group_label[group_idx][0]; 856 char *name = g_strdup_printf("gpio%s%d", group, pin_idx); 857 object_property_add(obj, name, "bool", aspeed_gpio_get_pin, 858 aspeed_gpio_set_pin, NULL, NULL); 859 g_free(name); 860 } 861 } 862 } 863 864 static const VMStateDescription vmstate_gpio_regs = { 865 .name = TYPE_ASPEED_GPIO"/regs", 866 .version_id = 1, 867 .minimum_version_id = 1, 868 .fields = (VMStateField[]) { 869 VMSTATE_UINT32(data_value, GPIOSets), 870 VMSTATE_UINT32(data_read, GPIOSets), 871 VMSTATE_UINT32(direction, GPIOSets), 872 VMSTATE_UINT32(int_enable, GPIOSets), 873 VMSTATE_UINT32(int_sens_0, GPIOSets), 874 VMSTATE_UINT32(int_sens_1, GPIOSets), 875 VMSTATE_UINT32(int_sens_2, GPIOSets), 876 VMSTATE_UINT32(int_status, GPIOSets), 877 VMSTATE_UINT32(reset_tol, GPIOSets), 878 VMSTATE_UINT32(cmd_source_0, GPIOSets), 879 VMSTATE_UINT32(cmd_source_1, GPIOSets), 880 VMSTATE_UINT32(debounce_1, GPIOSets), 881 VMSTATE_UINT32(debounce_2, GPIOSets), 882 VMSTATE_UINT32(input_mask, GPIOSets), 883 VMSTATE_END_OF_LIST(), 884 } 885 }; 886 887 static const VMStateDescription vmstate_aspeed_gpio = { 888 .name = TYPE_ASPEED_GPIO, 889 .version_id = 1, 890 .minimum_version_id = 1, 891 .fields = (VMStateField[]) { 892 VMSTATE_STRUCT_ARRAY(sets, AspeedGPIOState, ASPEED_GPIO_MAX_NR_SETS, 893 1, vmstate_gpio_regs, GPIOSets), 894 VMSTATE_UINT32_ARRAY(debounce_regs, AspeedGPIOState, 895 ASPEED_GPIO_NR_DEBOUNCE_REGS), 896 VMSTATE_END_OF_LIST(), 897 } 898 }; 899 900 static void aspeed_gpio_class_init(ObjectClass *klass, void *data) 901 { 902 DeviceClass *dc = DEVICE_CLASS(klass); 903 904 dc->realize = aspeed_gpio_realize; 905 dc->reset = aspeed_gpio_reset; 906 dc->desc = "Aspeed GPIO Controller"; 907 dc->vmsd = &vmstate_aspeed_gpio; 908 } 909 910 static void aspeed_gpio_ast2400_class_init(ObjectClass *klass, void *data) 911 { 912 AspeedGPIOClass *agc = ASPEED_GPIO_CLASS(klass); 913 914 agc->props = ast2400_set_props; 915 agc->nr_gpio_pins = 216; 916 agc->nr_gpio_sets = 7; 917 agc->reg_table = aspeed_3_3v_gpios; 918 } 919 920 static void aspeed_gpio_2500_class_init(ObjectClass *klass, void *data) 921 { 922 AspeedGPIOClass *agc = ASPEED_GPIO_CLASS(klass); 923 924 agc->props = ast2500_set_props; 925 agc->nr_gpio_pins = 228; 926 agc->nr_gpio_sets = 8; 927 agc->reg_table = aspeed_3_3v_gpios; 928 } 929 930 static void aspeed_gpio_ast2600_3_3v_class_init(ObjectClass *klass, void *data) 931 { 932 AspeedGPIOClass *agc = ASPEED_GPIO_CLASS(klass); 933 934 agc->props = ast2600_3_3v_set_props; 935 agc->nr_gpio_pins = 208; 936 agc->nr_gpio_sets = 7; 937 agc->reg_table = aspeed_3_3v_gpios; 938 } 939 940 static void aspeed_gpio_ast2600_1_8v_class_init(ObjectClass *klass, void *data) 941 { 942 AspeedGPIOClass *agc = ASPEED_GPIO_CLASS(klass); 943 944 agc->props = ast2600_1_8v_set_props; 945 agc->nr_gpio_pins = 36; 946 agc->nr_gpio_sets = 2; 947 agc->reg_table = aspeed_1_8v_gpios; 948 } 949 950 static const TypeInfo aspeed_gpio_info = { 951 .name = TYPE_ASPEED_GPIO, 952 .parent = TYPE_SYS_BUS_DEVICE, 953 .instance_size = sizeof(AspeedGPIOState), 954 .class_size = sizeof(AspeedGPIOClass), 955 .class_init = aspeed_gpio_class_init, 956 .abstract = true, 957 }; 958 959 static const TypeInfo aspeed_gpio_ast2400_info = { 960 .name = TYPE_ASPEED_GPIO "-ast2400", 961 .parent = TYPE_ASPEED_GPIO, 962 .class_init = aspeed_gpio_ast2400_class_init, 963 .instance_init = aspeed_gpio_init, 964 }; 965 966 static const TypeInfo aspeed_gpio_ast2500_info = { 967 .name = TYPE_ASPEED_GPIO "-ast2500", 968 .parent = TYPE_ASPEED_GPIO, 969 .class_init = aspeed_gpio_2500_class_init, 970 .instance_init = aspeed_gpio_init, 971 }; 972 973 static const TypeInfo aspeed_gpio_ast2600_3_3v_info = { 974 .name = TYPE_ASPEED_GPIO "-ast2600", 975 .parent = TYPE_ASPEED_GPIO, 976 .class_init = aspeed_gpio_ast2600_3_3v_class_init, 977 .instance_init = aspeed_gpio_init, 978 }; 979 980 static const TypeInfo aspeed_gpio_ast2600_1_8v_info = { 981 .name = TYPE_ASPEED_GPIO "-ast2600-1_8v", 982 .parent = TYPE_ASPEED_GPIO, 983 .class_init = aspeed_gpio_ast2600_1_8v_class_init, 984 .instance_init = aspeed_gpio_init, 985 }; 986 987 static void aspeed_gpio_register_types(void) 988 { 989 type_register_static(&aspeed_gpio_info); 990 type_register_static(&aspeed_gpio_ast2400_info); 991 type_register_static(&aspeed_gpio_ast2500_info); 992 type_register_static(&aspeed_gpio_ast2600_3_3v_info); 993 type_register_static(&aspeed_gpio_ast2600_1_8v_info); 994 } 995 996 type_init(aspeed_gpio_register_types); 997