xref: /openbmc/qemu/hw/dma/rc4030.c (revision ebe15582)
1 /*
2  * QEMU JAZZ RC4030 chipset
3  *
4  * Copyright (c) 2007-2013 Hervé Poussineau
5  *
6  * Permission is hereby granted, free of charge, to any person obtaining a copy
7  * of this software and associated documentation files (the "Software"), to deal
8  * in the Software without restriction, including without limitation the rights
9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10  * copies of the Software, and to permit persons to whom the Software is
11  * furnished to do so, subject to the following conditions:
12  *
13  * The above copyright notice and this permission notice shall be included in
14  * all copies or substantial portions of the Software.
15  *
16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22  * THE SOFTWARE.
23  */
24 
25 #include "qemu/osdep.h"
26 #include "qemu/units.h"
27 #include "hw/irq.h"
28 #include "hw/mips/mips.h"
29 #include "hw/sysbus.h"
30 #include "migration/vmstate.h"
31 #include "qemu/timer.h"
32 #include "qemu/log.h"
33 #include "qemu/module.h"
34 #include "exec/address-spaces.h"
35 #include "trace.h"
36 
37 /********************************************************/
38 /* rc4030 emulation                                     */
39 
40 typedef struct dma_pagetable_entry {
41     int32_t frame;
42     int32_t owner;
43 } QEMU_PACKED dma_pagetable_entry;
44 
45 #define DMA_PAGESIZE    4096
46 #define DMA_REG_ENABLE  1
47 #define DMA_REG_COUNT   2
48 #define DMA_REG_ADDRESS 3
49 
50 #define DMA_FLAG_ENABLE     0x0001
51 #define DMA_FLAG_MEM_TO_DEV 0x0002
52 #define DMA_FLAG_TC_INTR    0x0100
53 #define DMA_FLAG_MEM_INTR   0x0200
54 #define DMA_FLAG_ADDR_INTR  0x0400
55 
56 #define TYPE_RC4030 "rc4030"
57 #define RC4030(obj) \
58     OBJECT_CHECK(rc4030State, (obj), TYPE_RC4030)
59 
60 #define TYPE_RC4030_IOMMU_MEMORY_REGION "rc4030-iommu-memory-region"
61 
62 typedef struct rc4030State {
63 
64     SysBusDevice parent;
65 
66     uint32_t config; /* 0x0000: RC4030 config register */
67     uint32_t revision; /* 0x0008: RC4030 Revision register */
68     uint32_t invalid_address_register; /* 0x0010: Invalid Address register */
69 
70     /* DMA */
71     uint32_t dma_regs[8][4];
72     uint32_t dma_tl_base; /* 0x0018: DMA transl. table base */
73     uint32_t dma_tl_limit; /* 0x0020: DMA transl. table limit */
74 
75     /* cache */
76     uint32_t cache_maint; /* 0x0030: Cache Maintenance */
77     uint32_t remote_failed_address; /* 0x0038: Remote Failed Address */
78     uint32_t memory_failed_address; /* 0x0040: Memory Failed Address */
79     uint32_t cache_ptag; /* 0x0048: I/O Cache Physical Tag */
80     uint32_t cache_ltag; /* 0x0050: I/O Cache Logical Tag */
81     uint32_t cache_bmask; /* 0x0058: I/O Cache Byte Mask */
82 
83     uint32_t nmi_interrupt; /* 0x0200: interrupt source */
84     uint32_t memory_refresh_rate; /* 0x0210: memory refresh rate */
85     uint32_t nvram_protect; /* 0x0220: NV ram protect register */
86     uint32_t rem_speed[16];
87     uint32_t imr_jazz; /* Local bus int enable mask */
88     uint32_t isr_jazz; /* Local bus int source */
89 
90     /* timer */
91     QEMUTimer *periodic_timer;
92     uint32_t itr; /* Interval timer reload */
93 
94     qemu_irq timer_irq;
95     qemu_irq jazz_bus_irq;
96 
97     /* whole DMA memory region, root of DMA address space */
98     IOMMUMemoryRegion dma_mr;
99     AddressSpace dma_as;
100 
101     MemoryRegion iomem_chipset;
102     MemoryRegion iomem_jazzio;
103 } rc4030State;
104 
105 static void set_next_tick(rc4030State *s)
106 {
107     uint32_t tm_hz;
108     qemu_irq_lower(s->timer_irq);
109 
110     tm_hz = 1000 / (s->itr + 1);
111 
112     timer_mod(s->periodic_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
113                    NANOSECONDS_PER_SECOND / tm_hz);
114 }
115 
116 /* called for accesses to rc4030 */
117 static uint64_t rc4030_read(void *opaque, hwaddr addr, unsigned int size)
118 {
119     rc4030State *s = opaque;
120     uint32_t val;
121 
122     addr &= 0x3fff;
123     switch (addr & ~0x3) {
124     /* Global config register */
125     case 0x0000:
126         val = s->config;
127         break;
128     /* Revision register */
129     case 0x0008:
130         val = s->revision;
131         break;
132     /* Invalid Address register */
133     case 0x0010:
134         val = s->invalid_address_register;
135         break;
136     /* DMA transl. table base */
137     case 0x0018:
138         val = s->dma_tl_base;
139         break;
140     /* DMA transl. table limit */
141     case 0x0020:
142         val = s->dma_tl_limit;
143         break;
144     /* Remote Failed Address */
145     case 0x0038:
146         val = s->remote_failed_address;
147         break;
148     /* Memory Failed Address */
149     case 0x0040:
150         val = s->memory_failed_address;
151         break;
152     /* I/O Cache Byte Mask */
153     case 0x0058:
154         val = s->cache_bmask;
155         /* HACK */
156         if (s->cache_bmask == (uint32_t)-1) {
157             s->cache_bmask = 0;
158         }
159         break;
160     /* Remote Speed Registers */
161     case 0x0070:
162     case 0x0078:
163     case 0x0080:
164     case 0x0088:
165     case 0x0090:
166     case 0x0098:
167     case 0x00a0:
168     case 0x00a8:
169     case 0x00b0:
170     case 0x00b8:
171     case 0x00c0:
172     case 0x00c8:
173     case 0x00d0:
174     case 0x00d8:
175     case 0x00e0:
176     case 0x00e8:
177         val = s->rem_speed[(addr - 0x0070) >> 3];
178         break;
179     /* DMA channel base address */
180     case 0x0100:
181     case 0x0108:
182     case 0x0110:
183     case 0x0118:
184     case 0x0120:
185     case 0x0128:
186     case 0x0130:
187     case 0x0138:
188     case 0x0140:
189     case 0x0148:
190     case 0x0150:
191     case 0x0158:
192     case 0x0160:
193     case 0x0168:
194     case 0x0170:
195     case 0x0178:
196     case 0x0180:
197     case 0x0188:
198     case 0x0190:
199     case 0x0198:
200     case 0x01a0:
201     case 0x01a8:
202     case 0x01b0:
203     case 0x01b8:
204     case 0x01c0:
205     case 0x01c8:
206     case 0x01d0:
207     case 0x01d8:
208     case 0x01e0:
209     case 0x01e8:
210     case 0x01f0:
211     case 0x01f8:
212         {
213             int entry = (addr - 0x0100) >> 5;
214             int idx = (addr & 0x1f) >> 3;
215             val = s->dma_regs[entry][idx];
216         }
217         break;
218     /* Interrupt source */
219     case 0x0200:
220         val = s->nmi_interrupt;
221         break;
222     /* Error type */
223     case 0x0208:
224         val = 0;
225         break;
226     /* Memory refresh rate */
227     case 0x0210:
228         val = s->memory_refresh_rate;
229         break;
230     /* NV ram protect register */
231     case 0x0220:
232         val = s->nvram_protect;
233         break;
234     /* Interval timer count */
235     case 0x0230:
236         val = 0;
237         qemu_irq_lower(s->timer_irq);
238         break;
239     /* EISA interrupt */
240     case 0x0238:
241         val = 7; /* FIXME: should be read from EISA controller */
242         break;
243     default:
244         qemu_log_mask(LOG_GUEST_ERROR,
245                       "rc4030: invalid read at 0x%x", (int)addr);
246         val = 0;
247         break;
248     }
249 
250     if ((addr & ~3) != 0x230) {
251         trace_rc4030_read(addr, val);
252     }
253 
254     return val;
255 }
256 
257 static void rc4030_write(void *opaque, hwaddr addr, uint64_t data,
258                          unsigned int size)
259 {
260     rc4030State *s = opaque;
261     uint32_t val = data;
262     addr &= 0x3fff;
263 
264     trace_rc4030_write(addr, val);
265 
266     switch (addr & ~0x3) {
267     /* Global config register */
268     case 0x0000:
269         s->config = val;
270         break;
271     /* DMA transl. table base */
272     case 0x0018:
273         s->dma_tl_base = val;
274         break;
275     /* DMA transl. table limit */
276     case 0x0020:
277         s->dma_tl_limit = val;
278         break;
279     /* DMA transl. table invalidated */
280     case 0x0028:
281         break;
282     /* Cache Maintenance */
283     case 0x0030:
284         s->cache_maint = val;
285         break;
286     /* I/O Cache Physical Tag */
287     case 0x0048:
288         s->cache_ptag = val;
289         break;
290     /* I/O Cache Logical Tag */
291     case 0x0050:
292         s->cache_ltag = val;
293         break;
294     /* I/O Cache Byte Mask */
295     case 0x0058:
296         s->cache_bmask |= val; /* HACK */
297         break;
298     /* I/O Cache Buffer Window */
299     case 0x0060:
300         /* HACK */
301         if (s->cache_ltag == 0x80000001 && s->cache_bmask == 0xf0f0f0f) {
302             hwaddr dest = s->cache_ptag & ~0x1;
303             dest += (s->cache_maint & 0x3) << 3;
304             cpu_physical_memory_write(dest, &val, 4);
305         }
306         break;
307     /* Remote Speed Registers */
308     case 0x0070:
309     case 0x0078:
310     case 0x0080:
311     case 0x0088:
312     case 0x0090:
313     case 0x0098:
314     case 0x00a0:
315     case 0x00a8:
316     case 0x00b0:
317     case 0x00b8:
318     case 0x00c0:
319     case 0x00c8:
320     case 0x00d0:
321     case 0x00d8:
322     case 0x00e0:
323     case 0x00e8:
324         s->rem_speed[(addr - 0x0070) >> 3] = val;
325         break;
326     /* DMA channel base address */
327     case 0x0100:
328     case 0x0108:
329     case 0x0110:
330     case 0x0118:
331     case 0x0120:
332     case 0x0128:
333     case 0x0130:
334     case 0x0138:
335     case 0x0140:
336     case 0x0148:
337     case 0x0150:
338     case 0x0158:
339     case 0x0160:
340     case 0x0168:
341     case 0x0170:
342     case 0x0178:
343     case 0x0180:
344     case 0x0188:
345     case 0x0190:
346     case 0x0198:
347     case 0x01a0:
348     case 0x01a8:
349     case 0x01b0:
350     case 0x01b8:
351     case 0x01c0:
352     case 0x01c8:
353     case 0x01d0:
354     case 0x01d8:
355     case 0x01e0:
356     case 0x01e8:
357     case 0x01f0:
358     case 0x01f8:
359         {
360             int entry = (addr - 0x0100) >> 5;
361             int idx = (addr & 0x1f) >> 3;
362             s->dma_regs[entry][idx] = val;
363         }
364         break;
365     /* Memory refresh rate */
366     case 0x0210:
367         s->memory_refresh_rate = val;
368         break;
369     /* Interval timer reload */
370     case 0x0228:
371         s->itr = val & 0x01FF;
372         qemu_irq_lower(s->timer_irq);
373         set_next_tick(s);
374         break;
375     /* EISA interrupt */
376     case 0x0238:
377         break;
378     default:
379         qemu_log_mask(LOG_GUEST_ERROR,
380                       "rc4030: invalid write of 0x%02x at 0x%x",
381                       val, (int)addr);
382         break;
383     }
384 }
385 
386 static const MemoryRegionOps rc4030_ops = {
387     .read = rc4030_read,
388     .write = rc4030_write,
389     .impl.min_access_size = 4,
390     .impl.max_access_size = 4,
391     .endianness = DEVICE_NATIVE_ENDIAN,
392 };
393 
394 static void update_jazz_irq(rc4030State *s)
395 {
396     uint16_t pending;
397 
398     pending = s->isr_jazz & s->imr_jazz;
399 
400     if (pending != 0)
401         qemu_irq_raise(s->jazz_bus_irq);
402     else
403         qemu_irq_lower(s->jazz_bus_irq);
404 }
405 
406 static void rc4030_irq_jazz_request(void *opaque, int irq, int level)
407 {
408     rc4030State *s = opaque;
409 
410     if (level) {
411         s->isr_jazz |= 1 << irq;
412     } else {
413         s->isr_jazz &= ~(1 << irq);
414     }
415 
416     update_jazz_irq(s);
417 }
418 
419 static void rc4030_periodic_timer(void *opaque)
420 {
421     rc4030State *s = opaque;
422 
423     set_next_tick(s);
424     qemu_irq_raise(s->timer_irq);
425 }
426 
427 static uint64_t jazzio_read(void *opaque, hwaddr addr, unsigned int size)
428 {
429     rc4030State *s = opaque;
430     uint32_t val;
431     uint32_t irq;
432     addr &= 0xfff;
433 
434     switch (addr) {
435     /* Local bus int source */
436     case 0x00: {
437         uint32_t pending = s->isr_jazz & s->imr_jazz;
438         val = 0;
439         irq = 0;
440         while (pending) {
441             if (pending & 1) {
442                 val = (irq + 1) << 2;
443                 break;
444             }
445             irq++;
446             pending >>= 1;
447         }
448         break;
449     }
450     /* Local bus int enable mask */
451     case 0x02:
452         val = s->imr_jazz;
453         break;
454     default:
455         qemu_log_mask(LOG_GUEST_ERROR,
456                       "rc4030/jazzio: invalid read at 0x%x", (int)addr);
457         val = 0;
458         break;
459     }
460 
461     trace_jazzio_read(addr, val);
462 
463     return val;
464 }
465 
466 static void jazzio_write(void *opaque, hwaddr addr, uint64_t data,
467                          unsigned int size)
468 {
469     rc4030State *s = opaque;
470     uint32_t val = data;
471     addr &= 0xfff;
472 
473     trace_jazzio_write(addr, val);
474 
475     switch (addr) {
476     /* Local bus int enable mask */
477     case 0x02:
478         s->imr_jazz = val;
479         update_jazz_irq(s);
480         break;
481     default:
482         qemu_log_mask(LOG_GUEST_ERROR,
483                       "rc4030/jazzio: invalid write of 0x%02x at 0x%x",
484                       val, (int)addr);
485         break;
486     }
487 }
488 
489 static const MemoryRegionOps jazzio_ops = {
490     .read = jazzio_read,
491     .write = jazzio_write,
492     .impl.min_access_size = 2,
493     .impl.max_access_size = 2,
494     .endianness = DEVICE_NATIVE_ENDIAN,
495 };
496 
497 static IOMMUTLBEntry rc4030_dma_translate(IOMMUMemoryRegion *iommu, hwaddr addr,
498                                           IOMMUAccessFlags flag, int iommu_idx)
499 {
500     rc4030State *s = container_of(iommu, rc4030State, dma_mr);
501     IOMMUTLBEntry ret = {
502         .target_as = &address_space_memory,
503         .iova = addr & ~(DMA_PAGESIZE - 1),
504         .translated_addr = 0,
505         .addr_mask = DMA_PAGESIZE - 1,
506         .perm = IOMMU_NONE,
507     };
508     uint64_t i, entry_address;
509     dma_pagetable_entry entry;
510 
511     i = addr / DMA_PAGESIZE;
512     if (i < s->dma_tl_limit / sizeof(entry)) {
513         entry_address = (s->dma_tl_base & 0x7fffffff) + i * sizeof(entry);
514         if (address_space_read(ret.target_as, entry_address,
515                                MEMTXATTRS_UNSPECIFIED, (unsigned char *)&entry,
516                                sizeof(entry)) == MEMTX_OK) {
517             ret.translated_addr = entry.frame & ~(DMA_PAGESIZE - 1);
518             ret.perm = IOMMU_RW;
519         }
520     }
521 
522     return ret;
523 }
524 
525 static void rc4030_reset(DeviceState *dev)
526 {
527     rc4030State *s = RC4030(dev);
528     int i;
529 
530     s->config = 0x410; /* some boards seem to accept 0x104 too */
531     s->revision = 1;
532     s->invalid_address_register = 0;
533 
534     memset(s->dma_regs, 0, sizeof(s->dma_regs));
535 
536     s->remote_failed_address = s->memory_failed_address = 0;
537     s->cache_maint = 0;
538     s->cache_ptag = s->cache_ltag = 0;
539     s->cache_bmask = 0;
540 
541     s->memory_refresh_rate = 0x18186;
542     s->nvram_protect = 7;
543     for (i = 0; i < 15; i++) {
544         s->rem_speed[i] = 7;
545     }
546     s->imr_jazz = 0x10; /* XXX: required by firmware, but why? */
547     s->isr_jazz = 0;
548 
549     s->itr = 0;
550 
551     qemu_irq_lower(s->timer_irq);
552     qemu_irq_lower(s->jazz_bus_irq);
553 }
554 
555 static int rc4030_post_load(void *opaque, int version_id)
556 {
557     rc4030State *s = opaque;
558 
559     set_next_tick(s);
560     update_jazz_irq(s);
561 
562     return 0;
563 }
564 
565 static const VMStateDescription vmstate_rc4030 = {
566     .name = "rc4030",
567     .version_id = 3,
568     .post_load = rc4030_post_load,
569     .fields = (VMStateField []) {
570         VMSTATE_UINT32(config, rc4030State),
571         VMSTATE_UINT32(invalid_address_register, rc4030State),
572         VMSTATE_UINT32_2DARRAY(dma_regs, rc4030State, 8, 4),
573         VMSTATE_UINT32(dma_tl_base, rc4030State),
574         VMSTATE_UINT32(dma_tl_limit, rc4030State),
575         VMSTATE_UINT32(cache_maint, rc4030State),
576         VMSTATE_UINT32(remote_failed_address, rc4030State),
577         VMSTATE_UINT32(memory_failed_address, rc4030State),
578         VMSTATE_UINT32(cache_ptag, rc4030State),
579         VMSTATE_UINT32(cache_ltag, rc4030State),
580         VMSTATE_UINT32(cache_bmask, rc4030State),
581         VMSTATE_UINT32(memory_refresh_rate, rc4030State),
582         VMSTATE_UINT32(nvram_protect, rc4030State),
583         VMSTATE_UINT32_ARRAY(rem_speed, rc4030State, 16),
584         VMSTATE_UINT32(imr_jazz, rc4030State),
585         VMSTATE_UINT32(isr_jazz, rc4030State),
586         VMSTATE_UINT32(itr, rc4030State),
587         VMSTATE_END_OF_LIST()
588     }
589 };
590 
591 static void rc4030_do_dma(void *opaque, int n, uint8_t *buf, int len, int is_write)
592 {
593     rc4030State *s = opaque;
594     hwaddr dma_addr;
595     int dev_to_mem;
596 
597     s->dma_regs[n][DMA_REG_ENABLE] &=
598            ~(DMA_FLAG_TC_INTR | DMA_FLAG_MEM_INTR | DMA_FLAG_ADDR_INTR);
599 
600     /* Check DMA channel consistency */
601     dev_to_mem = (s->dma_regs[n][DMA_REG_ENABLE] & DMA_FLAG_MEM_TO_DEV) ? 0 : 1;
602     if (!(s->dma_regs[n][DMA_REG_ENABLE] & DMA_FLAG_ENABLE) ||
603         (is_write != dev_to_mem)) {
604         s->dma_regs[n][DMA_REG_ENABLE] |= DMA_FLAG_MEM_INTR;
605         s->nmi_interrupt |= 1 << n;
606         return;
607     }
608 
609     /* Get start address and len */
610     if (len > s->dma_regs[n][DMA_REG_COUNT]) {
611         len = s->dma_regs[n][DMA_REG_COUNT];
612     }
613     dma_addr = s->dma_regs[n][DMA_REG_ADDRESS];
614 
615     /* Read/write data at right place */
616     address_space_rw(&s->dma_as, dma_addr, MEMTXATTRS_UNSPECIFIED,
617                      buf, len, is_write);
618 
619     s->dma_regs[n][DMA_REG_ENABLE] |= DMA_FLAG_TC_INTR;
620     s->dma_regs[n][DMA_REG_COUNT] -= len;
621 }
622 
623 struct rc4030DMAState {
624     void *opaque;
625     int n;
626 };
627 
628 void rc4030_dma_read(void *dma, uint8_t *buf, int len)
629 {
630     rc4030_dma s = dma;
631     rc4030_do_dma(s->opaque, s->n, buf, len, 0);
632 }
633 
634 void rc4030_dma_write(void *dma, uint8_t *buf, int len)
635 {
636     rc4030_dma s = dma;
637     rc4030_do_dma(s->opaque, s->n, buf, len, 1);
638 }
639 
640 static rc4030_dma *rc4030_allocate_dmas(void *opaque, int n)
641 {
642     rc4030_dma *s;
643     struct rc4030DMAState *p;
644     int i;
645 
646     s = (rc4030_dma *)g_malloc0(sizeof(rc4030_dma) * n);
647     p = (struct rc4030DMAState *)g_malloc0(sizeof(struct rc4030DMAState) * n);
648     for (i = 0; i < n; i++) {
649         p->opaque = opaque;
650         p->n = i;
651         s[i] = p;
652         p++;
653     }
654     return s;
655 }
656 
657 static void rc4030_initfn(Object *obj)
658 {
659     DeviceState *dev = DEVICE(obj);
660     rc4030State *s = RC4030(obj);
661     SysBusDevice *sysbus = SYS_BUS_DEVICE(obj);
662 
663     qdev_init_gpio_in(dev, rc4030_irq_jazz_request, 16);
664 
665     sysbus_init_irq(sysbus, &s->timer_irq);
666     sysbus_init_irq(sysbus, &s->jazz_bus_irq);
667 
668     sysbus_init_mmio(sysbus, &s->iomem_chipset);
669     sysbus_init_mmio(sysbus, &s->iomem_jazzio);
670 }
671 
672 static void rc4030_realize(DeviceState *dev, Error **errp)
673 {
674     rc4030State *s = RC4030(dev);
675     Object *o = OBJECT(dev);
676 
677     s->periodic_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL,
678                                      rc4030_periodic_timer, s);
679 
680     memory_region_init_io(&s->iomem_chipset, NULL, &rc4030_ops, s,
681                           "rc4030.chipset", 0x300);
682     memory_region_init_io(&s->iomem_jazzio, NULL, &jazzio_ops, s,
683                           "rc4030.jazzio", 0x00001000);
684 
685     memory_region_init_iommu(&s->dma_mr, sizeof(s->dma_mr),
686                              TYPE_RC4030_IOMMU_MEMORY_REGION,
687                              o, "rc4030.dma", 4 * GiB);
688     address_space_init(&s->dma_as, MEMORY_REGION(&s->dma_mr), "rc4030-dma");
689 }
690 
691 static void rc4030_unrealize(DeviceState *dev, Error **errp)
692 {
693     rc4030State *s = RC4030(dev);
694 
695     timer_free(s->periodic_timer);
696 
697     address_space_destroy(&s->dma_as);
698     object_unparent(OBJECT(&s->dma_mr));
699 }
700 
701 static void rc4030_class_init(ObjectClass *klass, void *class_data)
702 {
703     DeviceClass *dc = DEVICE_CLASS(klass);
704 
705     dc->realize = rc4030_realize;
706     dc->unrealize = rc4030_unrealize;
707     dc->reset = rc4030_reset;
708     dc->vmsd = &vmstate_rc4030;
709 }
710 
711 static const TypeInfo rc4030_info = {
712     .name = TYPE_RC4030,
713     .parent = TYPE_SYS_BUS_DEVICE,
714     .instance_size = sizeof(rc4030State),
715     .instance_init = rc4030_initfn,
716     .class_init = rc4030_class_init,
717 };
718 
719 static void rc4030_iommu_memory_region_class_init(ObjectClass *klass,
720                                                   void *data)
721 {
722     IOMMUMemoryRegionClass *imrc = IOMMU_MEMORY_REGION_CLASS(klass);
723 
724     imrc->translate = rc4030_dma_translate;
725 }
726 
727 static const TypeInfo rc4030_iommu_memory_region_info = {
728     .parent = TYPE_IOMMU_MEMORY_REGION,
729     .name = TYPE_RC4030_IOMMU_MEMORY_REGION,
730     .class_init = rc4030_iommu_memory_region_class_init,
731 };
732 
733 static void rc4030_register_types(void)
734 {
735     type_register_static(&rc4030_info);
736     type_register_static(&rc4030_iommu_memory_region_info);
737 }
738 
739 type_init(rc4030_register_types)
740 
741 DeviceState *rc4030_init(rc4030_dma **dmas, IOMMUMemoryRegion **dma_mr)
742 {
743     DeviceState *dev;
744 
745     dev = qdev_create(NULL, TYPE_RC4030);
746     qdev_init_nofail(dev);
747 
748     *dmas = rc4030_allocate_dmas(dev, 4);
749     *dma_mr = &RC4030(dev)->dma_mr;
750     return dev;
751 }
752