xref: /openbmc/qemu/hw/dma/rc4030.c (revision e615c157)
1 /*
2  * QEMU JAZZ RC4030 chipset
3  *
4  * Copyright (c) 2007-2013 Hervé Poussineau
5  *
6  * Permission is hereby granted, free of charge, to any person obtaining a copy
7  * of this software and associated documentation files (the "Software"), to deal
8  * in the Software without restriction, including without limitation the rights
9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10  * copies of the Software, and to permit persons to whom the Software is
11  * furnished to do so, subject to the following conditions:
12  *
13  * The above copyright notice and this permission notice shall be included in
14  * all copies or substantial portions of the Software.
15  *
16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22  * THE SOFTWARE.
23  */
24 
25 #include "qemu/osdep.h"
26 #include "qemu/units.h"
27 #include "hw/irq.h"
28 #include "hw/mips/mips.h"
29 #include "hw/sysbus.h"
30 #include "migration/vmstate.h"
31 #include "qemu/timer.h"
32 #include "qemu/log.h"
33 #include "qemu/module.h"
34 #include "exec/address-spaces.h"
35 #include "trace.h"
36 
37 /********************************************************/
38 /* rc4030 emulation                                     */
39 
40 typedef struct dma_pagetable_entry {
41     int32_t frame;
42     int32_t owner;
43 } QEMU_PACKED dma_pagetable_entry;
44 
45 #define DMA_PAGESIZE    4096
46 #define DMA_REG_ENABLE  1
47 #define DMA_REG_COUNT   2
48 #define DMA_REG_ADDRESS 3
49 
50 #define DMA_FLAG_ENABLE     0x0001
51 #define DMA_FLAG_MEM_TO_DEV 0x0002
52 #define DMA_FLAG_TC_INTR    0x0100
53 #define DMA_FLAG_MEM_INTR   0x0200
54 #define DMA_FLAG_ADDR_INTR  0x0400
55 
56 #define TYPE_RC4030 "rc4030"
57 #define RC4030(obj) \
58     OBJECT_CHECK(rc4030State, (obj), TYPE_RC4030)
59 
60 #define TYPE_RC4030_IOMMU_MEMORY_REGION "rc4030-iommu-memory-region"
61 
62 typedef struct rc4030State {
63 
64     SysBusDevice parent;
65 
66     uint32_t config; /* 0x0000: RC4030 config register */
67     uint32_t revision; /* 0x0008: RC4030 Revision register */
68     uint32_t invalid_address_register; /* 0x0010: Invalid Address register */
69 
70     /* DMA */
71     uint32_t dma_regs[8][4];
72     uint32_t dma_tl_base; /* 0x0018: DMA transl. table base */
73     uint32_t dma_tl_limit; /* 0x0020: DMA transl. table limit */
74 
75     /* cache */
76     uint32_t cache_maint; /* 0x0030: Cache Maintenance */
77     uint32_t remote_failed_address; /* 0x0038: Remote Failed Address */
78     uint32_t memory_failed_address; /* 0x0040: Memory Failed Address */
79     uint32_t cache_ptag; /* 0x0048: I/O Cache Physical Tag */
80     uint32_t cache_ltag; /* 0x0050: I/O Cache Logical Tag */
81     uint32_t cache_bmask; /* 0x0058: I/O Cache Byte Mask */
82 
83     uint32_t nmi_interrupt; /* 0x0200: interrupt source */
84     uint32_t memory_refresh_rate; /* 0x0210: memory refresh rate */
85     uint32_t nvram_protect; /* 0x0220: NV ram protect register */
86     uint32_t rem_speed[16];
87     uint32_t imr_jazz; /* Local bus int enable mask */
88     uint32_t isr_jazz; /* Local bus int source */
89 
90     /* timer */
91     QEMUTimer *periodic_timer;
92     uint32_t itr; /* Interval timer reload */
93 
94     qemu_irq timer_irq;
95     qemu_irq jazz_bus_irq;
96 
97     /* whole DMA memory region, root of DMA address space */
98     IOMMUMemoryRegion dma_mr;
99     AddressSpace dma_as;
100 
101     MemoryRegion iomem_chipset;
102     MemoryRegion iomem_jazzio;
103 } rc4030State;
104 
105 static void set_next_tick(rc4030State *s)
106 {
107     uint32_t tm_hz;
108     qemu_irq_lower(s->timer_irq);
109 
110     tm_hz = 1000 / (s->itr + 1);
111 
112     timer_mod(s->periodic_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
113                    NANOSECONDS_PER_SECOND / tm_hz);
114 }
115 
116 /* called for accesses to rc4030 */
117 static uint64_t rc4030_read(void *opaque, hwaddr addr, unsigned int size)
118 {
119     rc4030State *s = opaque;
120     uint32_t val;
121 
122     addr &= 0x3fff;
123     switch (addr & ~0x3) {
124     /* Global config register */
125     case 0x0000:
126         val = s->config;
127         break;
128     /* Revision register */
129     case 0x0008:
130         val = s->revision;
131         break;
132     /* Invalid Address register */
133     case 0x0010:
134         val = s->invalid_address_register;
135         break;
136     /* DMA transl. table base */
137     case 0x0018:
138         val = s->dma_tl_base;
139         break;
140     /* DMA transl. table limit */
141     case 0x0020:
142         val = s->dma_tl_limit;
143         break;
144     /* Remote Failed Address */
145     case 0x0038:
146         val = s->remote_failed_address;
147         break;
148     /* Memory Failed Address */
149     case 0x0040:
150         val = s->memory_failed_address;
151         break;
152     /* I/O Cache Byte Mask */
153     case 0x0058:
154         val = s->cache_bmask;
155         /* HACK */
156         if (s->cache_bmask == (uint32_t)-1) {
157             s->cache_bmask = 0;
158         }
159         break;
160     /* Remote Speed Registers */
161     case 0x0070:
162     case 0x0078:
163     case 0x0080:
164     case 0x0088:
165     case 0x0090:
166     case 0x0098:
167     case 0x00a0:
168     case 0x00a8:
169     case 0x00b0:
170     case 0x00b8:
171     case 0x00c0:
172     case 0x00c8:
173     case 0x00d0:
174     case 0x00d8:
175     case 0x00e0:
176     case 0x00e8:
177         val = s->rem_speed[(addr - 0x0070) >> 3];
178         break;
179     /* DMA channel base address */
180     case 0x0100:
181     case 0x0108:
182     case 0x0110:
183     case 0x0118:
184     case 0x0120:
185     case 0x0128:
186     case 0x0130:
187     case 0x0138:
188     case 0x0140:
189     case 0x0148:
190     case 0x0150:
191     case 0x0158:
192     case 0x0160:
193     case 0x0168:
194     case 0x0170:
195     case 0x0178:
196     case 0x0180:
197     case 0x0188:
198     case 0x0190:
199     case 0x0198:
200     case 0x01a0:
201     case 0x01a8:
202     case 0x01b0:
203     case 0x01b8:
204     case 0x01c0:
205     case 0x01c8:
206     case 0x01d0:
207     case 0x01d8:
208     case 0x01e0:
209     case 0x01e8:
210     case 0x01f0:
211     case 0x01f8:
212         {
213             int entry = (addr - 0x0100) >> 5;
214             int idx = (addr & 0x1f) >> 3;
215             val = s->dma_regs[entry][idx];
216         }
217         break;
218     /* Interrupt source */
219     case 0x0200:
220         val = s->nmi_interrupt;
221         break;
222     /* Error type */
223     case 0x0208:
224         val = 0;
225         break;
226     /* Memory refresh rate */
227     case 0x0210:
228         val = s->memory_refresh_rate;
229         break;
230     /* NV ram protect register */
231     case 0x0220:
232         val = s->nvram_protect;
233         break;
234     /* Interval timer count */
235     case 0x0230:
236         val = 0;
237         qemu_irq_lower(s->timer_irq);
238         break;
239     /* EISA interrupt */
240     case 0x0238:
241         val = 7; /* FIXME: should be read from EISA controller */
242         break;
243     default:
244         qemu_log_mask(LOG_GUEST_ERROR,
245                       "rc4030: invalid read at 0x%x", (int)addr);
246         val = 0;
247         break;
248     }
249 
250     if ((addr & ~3) != 0x230) {
251         trace_rc4030_read(addr, val);
252     }
253 
254     return val;
255 }
256 
257 static void rc4030_write(void *opaque, hwaddr addr, uint64_t data,
258                          unsigned int size)
259 {
260     rc4030State *s = opaque;
261     uint32_t val = data;
262     addr &= 0x3fff;
263 
264     trace_rc4030_write(addr, val);
265 
266     switch (addr & ~0x3) {
267     /* Global config register */
268     case 0x0000:
269         s->config = val;
270         break;
271     /* DMA transl. table base */
272     case 0x0018:
273         s->dma_tl_base = val;
274         break;
275     /* DMA transl. table limit */
276     case 0x0020:
277         s->dma_tl_limit = val;
278         break;
279     /* DMA transl. table invalidated */
280     case 0x0028:
281         break;
282     /* Cache Maintenance */
283     case 0x0030:
284         s->cache_maint = val;
285         break;
286     /* I/O Cache Physical Tag */
287     case 0x0048:
288         s->cache_ptag = val;
289         break;
290     /* I/O Cache Logical Tag */
291     case 0x0050:
292         s->cache_ltag = val;
293         break;
294     /* I/O Cache Byte Mask */
295     case 0x0058:
296         s->cache_bmask |= val; /* HACK */
297         break;
298     /* I/O Cache Buffer Window */
299     case 0x0060:
300         /* HACK */
301         if (s->cache_ltag == 0x80000001 && s->cache_bmask == 0xf0f0f0f) {
302             hwaddr dest = s->cache_ptag & ~0x1;
303             dest += (s->cache_maint & 0x3) << 3;
304             cpu_physical_memory_write(dest, &val, 4);
305         }
306         break;
307     /* Remote Speed Registers */
308     case 0x0070:
309     case 0x0078:
310     case 0x0080:
311     case 0x0088:
312     case 0x0090:
313     case 0x0098:
314     case 0x00a0:
315     case 0x00a8:
316     case 0x00b0:
317     case 0x00b8:
318     case 0x00c0:
319     case 0x00c8:
320     case 0x00d0:
321     case 0x00d8:
322     case 0x00e0:
323     case 0x00e8:
324         s->rem_speed[(addr - 0x0070) >> 3] = val;
325         break;
326     /* DMA channel base address */
327     case 0x0100:
328     case 0x0108:
329     case 0x0110:
330     case 0x0118:
331     case 0x0120:
332     case 0x0128:
333     case 0x0130:
334     case 0x0138:
335     case 0x0140:
336     case 0x0148:
337     case 0x0150:
338     case 0x0158:
339     case 0x0160:
340     case 0x0168:
341     case 0x0170:
342     case 0x0178:
343     case 0x0180:
344     case 0x0188:
345     case 0x0190:
346     case 0x0198:
347     case 0x01a0:
348     case 0x01a8:
349     case 0x01b0:
350     case 0x01b8:
351     case 0x01c0:
352     case 0x01c8:
353     case 0x01d0:
354     case 0x01d8:
355     case 0x01e0:
356     case 0x01e8:
357     case 0x01f0:
358     case 0x01f8:
359         {
360             int entry = (addr - 0x0100) >> 5;
361             int idx = (addr & 0x1f) >> 3;
362             s->dma_regs[entry][idx] = val;
363         }
364         break;
365     /* Memory refresh rate */
366     case 0x0210:
367         s->memory_refresh_rate = val;
368         break;
369     /* Interval timer reload */
370     case 0x0228:
371         s->itr = val & 0x01FF;
372         qemu_irq_lower(s->timer_irq);
373         set_next_tick(s);
374         break;
375     /* EISA interrupt */
376     case 0x0238:
377         break;
378     default:
379         qemu_log_mask(LOG_GUEST_ERROR,
380                       "rc4030: invalid write of 0x%02x at 0x%x",
381                       val, (int)addr);
382         break;
383     }
384 }
385 
386 static const MemoryRegionOps rc4030_ops = {
387     .read = rc4030_read,
388     .write = rc4030_write,
389     .impl.min_access_size = 4,
390     .impl.max_access_size = 4,
391     .endianness = DEVICE_NATIVE_ENDIAN,
392 };
393 
394 static void update_jazz_irq(rc4030State *s)
395 {
396     uint16_t pending;
397 
398     pending = s->isr_jazz & s->imr_jazz;
399 
400     if (pending != 0) {
401         qemu_irq_raise(s->jazz_bus_irq);
402     } else {
403         qemu_irq_lower(s->jazz_bus_irq);
404     }
405 }
406 
407 static void rc4030_irq_jazz_request(void *opaque, int irq, int level)
408 {
409     rc4030State *s = opaque;
410 
411     if (level) {
412         s->isr_jazz |= 1 << irq;
413     } else {
414         s->isr_jazz &= ~(1 << irq);
415     }
416 
417     update_jazz_irq(s);
418 }
419 
420 static void rc4030_periodic_timer(void *opaque)
421 {
422     rc4030State *s = opaque;
423 
424     set_next_tick(s);
425     qemu_irq_raise(s->timer_irq);
426 }
427 
428 static uint64_t jazzio_read(void *opaque, hwaddr addr, unsigned int size)
429 {
430     rc4030State *s = opaque;
431     uint32_t val;
432     uint32_t irq;
433     addr &= 0xfff;
434 
435     switch (addr) {
436     /* Local bus int source */
437     case 0x00: {
438         uint32_t pending = s->isr_jazz & s->imr_jazz;
439         val = 0;
440         irq = 0;
441         while (pending) {
442             if (pending & 1) {
443                 val = (irq + 1) << 2;
444                 break;
445             }
446             irq++;
447             pending >>= 1;
448         }
449         break;
450     }
451     /* Local bus int enable mask */
452     case 0x02:
453         val = s->imr_jazz;
454         break;
455     default:
456         qemu_log_mask(LOG_GUEST_ERROR,
457                       "rc4030/jazzio: invalid read at 0x%x", (int)addr);
458         val = 0;
459         break;
460     }
461 
462     trace_jazzio_read(addr, val);
463 
464     return val;
465 }
466 
467 static void jazzio_write(void *opaque, hwaddr addr, uint64_t data,
468                          unsigned int size)
469 {
470     rc4030State *s = opaque;
471     uint32_t val = data;
472     addr &= 0xfff;
473 
474     trace_jazzio_write(addr, val);
475 
476     switch (addr) {
477     /* Local bus int enable mask */
478     case 0x02:
479         s->imr_jazz = val;
480         update_jazz_irq(s);
481         break;
482     default:
483         qemu_log_mask(LOG_GUEST_ERROR,
484                       "rc4030/jazzio: invalid write of 0x%02x at 0x%x",
485                       val, (int)addr);
486         break;
487     }
488 }
489 
490 static const MemoryRegionOps jazzio_ops = {
491     .read = jazzio_read,
492     .write = jazzio_write,
493     .impl.min_access_size = 2,
494     .impl.max_access_size = 2,
495     .endianness = DEVICE_NATIVE_ENDIAN,
496 };
497 
498 static IOMMUTLBEntry rc4030_dma_translate(IOMMUMemoryRegion *iommu, hwaddr addr,
499                                           IOMMUAccessFlags flag, int iommu_idx)
500 {
501     rc4030State *s = container_of(iommu, rc4030State, dma_mr);
502     IOMMUTLBEntry ret = {
503         .target_as = &address_space_memory,
504         .iova = addr & ~(DMA_PAGESIZE - 1),
505         .translated_addr = 0,
506         .addr_mask = DMA_PAGESIZE - 1,
507         .perm = IOMMU_NONE,
508     };
509     uint64_t i, entry_address;
510     dma_pagetable_entry entry;
511 
512     i = addr / DMA_PAGESIZE;
513     if (i < s->dma_tl_limit / sizeof(entry)) {
514         entry_address = (s->dma_tl_base & 0x7fffffff) + i * sizeof(entry);
515         if (address_space_read(ret.target_as, entry_address,
516                                MEMTXATTRS_UNSPECIFIED, (unsigned char *)&entry,
517                                sizeof(entry)) == MEMTX_OK) {
518             ret.translated_addr = entry.frame & ~(DMA_PAGESIZE - 1);
519             ret.perm = IOMMU_RW;
520         }
521     }
522 
523     return ret;
524 }
525 
526 static void rc4030_reset(DeviceState *dev)
527 {
528     rc4030State *s = RC4030(dev);
529     int i;
530 
531     s->config = 0x410; /* some boards seem to accept 0x104 too */
532     s->revision = 1;
533     s->invalid_address_register = 0;
534 
535     memset(s->dma_regs, 0, sizeof(s->dma_regs));
536 
537     s->remote_failed_address = s->memory_failed_address = 0;
538     s->cache_maint = 0;
539     s->cache_ptag = s->cache_ltag = 0;
540     s->cache_bmask = 0;
541 
542     s->memory_refresh_rate = 0x18186;
543     s->nvram_protect = 7;
544     for (i = 0; i < 15; i++) {
545         s->rem_speed[i] = 7;
546     }
547     s->imr_jazz = 0x10; /* XXX: required by firmware, but why? */
548     s->isr_jazz = 0;
549 
550     s->itr = 0;
551 
552     qemu_irq_lower(s->timer_irq);
553     qemu_irq_lower(s->jazz_bus_irq);
554 }
555 
556 static int rc4030_post_load(void *opaque, int version_id)
557 {
558     rc4030State *s = opaque;
559 
560     set_next_tick(s);
561     update_jazz_irq(s);
562 
563     return 0;
564 }
565 
566 static const VMStateDescription vmstate_rc4030 = {
567     .name = "rc4030",
568     .version_id = 3,
569     .post_load = rc4030_post_load,
570     .fields = (VMStateField []) {
571         VMSTATE_UINT32(config, rc4030State),
572         VMSTATE_UINT32(invalid_address_register, rc4030State),
573         VMSTATE_UINT32_2DARRAY(dma_regs, rc4030State, 8, 4),
574         VMSTATE_UINT32(dma_tl_base, rc4030State),
575         VMSTATE_UINT32(dma_tl_limit, rc4030State),
576         VMSTATE_UINT32(cache_maint, rc4030State),
577         VMSTATE_UINT32(remote_failed_address, rc4030State),
578         VMSTATE_UINT32(memory_failed_address, rc4030State),
579         VMSTATE_UINT32(cache_ptag, rc4030State),
580         VMSTATE_UINT32(cache_ltag, rc4030State),
581         VMSTATE_UINT32(cache_bmask, rc4030State),
582         VMSTATE_UINT32(memory_refresh_rate, rc4030State),
583         VMSTATE_UINT32(nvram_protect, rc4030State),
584         VMSTATE_UINT32_ARRAY(rem_speed, rc4030State, 16),
585         VMSTATE_UINT32(imr_jazz, rc4030State),
586         VMSTATE_UINT32(isr_jazz, rc4030State),
587         VMSTATE_UINT32(itr, rc4030State),
588         VMSTATE_END_OF_LIST()
589     }
590 };
591 
592 static void rc4030_do_dma(void *opaque, int n, uint8_t *buf,
593                           int len, int is_write)
594 {
595     rc4030State *s = opaque;
596     hwaddr dma_addr;
597     int dev_to_mem;
598 
599     s->dma_regs[n][DMA_REG_ENABLE] &=
600            ~(DMA_FLAG_TC_INTR | DMA_FLAG_MEM_INTR | DMA_FLAG_ADDR_INTR);
601 
602     /* Check DMA channel consistency */
603     dev_to_mem = (s->dma_regs[n][DMA_REG_ENABLE] & DMA_FLAG_MEM_TO_DEV) ? 0 : 1;
604     if (!(s->dma_regs[n][DMA_REG_ENABLE] & DMA_FLAG_ENABLE) ||
605         (is_write != dev_to_mem)) {
606         s->dma_regs[n][DMA_REG_ENABLE] |= DMA_FLAG_MEM_INTR;
607         s->nmi_interrupt |= 1 << n;
608         return;
609     }
610 
611     /* Get start address and len */
612     if (len > s->dma_regs[n][DMA_REG_COUNT]) {
613         len = s->dma_regs[n][DMA_REG_COUNT];
614     }
615     dma_addr = s->dma_regs[n][DMA_REG_ADDRESS];
616 
617     /* Read/write data at right place */
618     address_space_rw(&s->dma_as, dma_addr, MEMTXATTRS_UNSPECIFIED,
619                      buf, len, is_write);
620 
621     s->dma_regs[n][DMA_REG_ENABLE] |= DMA_FLAG_TC_INTR;
622     s->dma_regs[n][DMA_REG_COUNT] -= len;
623 }
624 
625 struct rc4030DMAState {
626     void *opaque;
627     int n;
628 };
629 
630 void rc4030_dma_read(void *dma, uint8_t *buf, int len)
631 {
632     rc4030_dma s = dma;
633     rc4030_do_dma(s->opaque, s->n, buf, len, 0);
634 }
635 
636 void rc4030_dma_write(void *dma, uint8_t *buf, int len)
637 {
638     rc4030_dma s = dma;
639     rc4030_do_dma(s->opaque, s->n, buf, len, 1);
640 }
641 
642 static rc4030_dma *rc4030_allocate_dmas(void *opaque, int n)
643 {
644     rc4030_dma *s;
645     struct rc4030DMAState *p;
646     int i;
647 
648     s = (rc4030_dma *)g_new0(rc4030_dma, n);
649     p = (struct rc4030DMAState *)g_new0(struct rc4030DMAState, n);
650     for (i = 0; i < n; i++) {
651         p->opaque = opaque;
652         p->n = i;
653         s[i] = p;
654         p++;
655     }
656     return s;
657 }
658 
659 static void rc4030_initfn(Object *obj)
660 {
661     DeviceState *dev = DEVICE(obj);
662     rc4030State *s = RC4030(obj);
663     SysBusDevice *sysbus = SYS_BUS_DEVICE(obj);
664 
665     qdev_init_gpio_in(dev, rc4030_irq_jazz_request, 16);
666 
667     sysbus_init_irq(sysbus, &s->timer_irq);
668     sysbus_init_irq(sysbus, &s->jazz_bus_irq);
669 
670     sysbus_init_mmio(sysbus, &s->iomem_chipset);
671     sysbus_init_mmio(sysbus, &s->iomem_jazzio);
672 }
673 
674 static void rc4030_realize(DeviceState *dev, Error **errp)
675 {
676     rc4030State *s = RC4030(dev);
677     Object *o = OBJECT(dev);
678 
679     s->periodic_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL,
680                                      rc4030_periodic_timer, s);
681 
682     memory_region_init_io(&s->iomem_chipset, NULL, &rc4030_ops, s,
683                           "rc4030.chipset", 0x300);
684     memory_region_init_io(&s->iomem_jazzio, NULL, &jazzio_ops, s,
685                           "rc4030.jazzio", 0x00001000);
686 
687     memory_region_init_iommu(&s->dma_mr, sizeof(s->dma_mr),
688                              TYPE_RC4030_IOMMU_MEMORY_REGION,
689                              o, "rc4030.dma", 4 * GiB);
690     address_space_init(&s->dma_as, MEMORY_REGION(&s->dma_mr), "rc4030-dma");
691 }
692 
693 static void rc4030_unrealize(DeviceState *dev, Error **errp)
694 {
695     rc4030State *s = RC4030(dev);
696 
697     timer_free(s->periodic_timer);
698 
699     address_space_destroy(&s->dma_as);
700     object_unparent(OBJECT(&s->dma_mr));
701 }
702 
703 static void rc4030_class_init(ObjectClass *klass, void *class_data)
704 {
705     DeviceClass *dc = DEVICE_CLASS(klass);
706 
707     dc->realize = rc4030_realize;
708     dc->unrealize = rc4030_unrealize;
709     dc->reset = rc4030_reset;
710     dc->vmsd = &vmstate_rc4030;
711 }
712 
713 static const TypeInfo rc4030_info = {
714     .name = TYPE_RC4030,
715     .parent = TYPE_SYS_BUS_DEVICE,
716     .instance_size = sizeof(rc4030State),
717     .instance_init = rc4030_initfn,
718     .class_init = rc4030_class_init,
719 };
720 
721 static void rc4030_iommu_memory_region_class_init(ObjectClass *klass,
722                                                   void *data)
723 {
724     IOMMUMemoryRegionClass *imrc = IOMMU_MEMORY_REGION_CLASS(klass);
725 
726     imrc->translate = rc4030_dma_translate;
727 }
728 
729 static const TypeInfo rc4030_iommu_memory_region_info = {
730     .parent = TYPE_IOMMU_MEMORY_REGION,
731     .name = TYPE_RC4030_IOMMU_MEMORY_REGION,
732     .class_init = rc4030_iommu_memory_region_class_init,
733 };
734 
735 static void rc4030_register_types(void)
736 {
737     type_register_static(&rc4030_info);
738     type_register_static(&rc4030_iommu_memory_region_info);
739 }
740 
741 type_init(rc4030_register_types)
742 
743 DeviceState *rc4030_init(rc4030_dma **dmas, IOMMUMemoryRegion **dma_mr)
744 {
745     DeviceState *dev;
746 
747     dev = qdev_create(NULL, TYPE_RC4030);
748     qdev_init_nofail(dev);
749 
750     *dmas = rc4030_allocate_dmas(dev, 4);
751     *dma_mr = &RC4030(dev)->dma_mr;
752     return dev;
753 }
754