xref: /openbmc/qemu/hw/dma/rc4030.c (revision 77d361b1)
1 /*
2  * QEMU JAZZ RC4030 chipset
3  *
4  * Copyright (c) 2007-2013 Hervé Poussineau
5  *
6  * Permission is hereby granted, free of charge, to any person obtaining a copy
7  * of this software and associated documentation files (the "Software"), to deal
8  * in the Software without restriction, including without limitation the rights
9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10  * copies of the Software, and to permit persons to whom the Software is
11  * furnished to do so, subject to the following conditions:
12  *
13  * The above copyright notice and this permission notice shall be included in
14  * all copies or substantial portions of the Software.
15  *
16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22  * THE SOFTWARE.
23  */
24 
25 #include "qemu/osdep.h"
26 #include "hw/hw.h"
27 #include "hw/mips/mips.h"
28 #include "hw/sysbus.h"
29 #include "qemu/timer.h"
30 #include "qemu/log.h"
31 #include "exec/address-spaces.h"
32 #include "trace.h"
33 
34 /********************************************************/
35 /* rc4030 emulation                                     */
36 
37 typedef struct dma_pagetable_entry {
38     int32_t frame;
39     int32_t owner;
40 } QEMU_PACKED dma_pagetable_entry;
41 
42 #define DMA_PAGESIZE    4096
43 #define DMA_REG_ENABLE  1
44 #define DMA_REG_COUNT   2
45 #define DMA_REG_ADDRESS 3
46 
47 #define DMA_FLAG_ENABLE     0x0001
48 #define DMA_FLAG_MEM_TO_DEV 0x0002
49 #define DMA_FLAG_TC_INTR    0x0100
50 #define DMA_FLAG_MEM_INTR   0x0200
51 #define DMA_FLAG_ADDR_INTR  0x0400
52 
53 #define TYPE_RC4030 "rc4030"
54 #define RC4030(obj) \
55     OBJECT_CHECK(rc4030State, (obj), TYPE_RC4030)
56 
57 #define TYPE_RC4030_IOMMU_MEMORY_REGION "rc4030-iommu-memory-region"
58 
59 typedef struct rc4030State
60 {
61     SysBusDevice parent;
62 
63     uint32_t config; /* 0x0000: RC4030 config register */
64     uint32_t revision; /* 0x0008: RC4030 Revision register */
65     uint32_t invalid_address_register; /* 0x0010: Invalid Address register */
66 
67     /* DMA */
68     uint32_t dma_regs[8][4];
69     uint32_t dma_tl_base; /* 0x0018: DMA transl. table base */
70     uint32_t dma_tl_limit; /* 0x0020: DMA transl. table limit */
71 
72     /* cache */
73     uint32_t cache_maint; /* 0x0030: Cache Maintenance */
74     uint32_t remote_failed_address; /* 0x0038: Remote Failed Address */
75     uint32_t memory_failed_address; /* 0x0040: Memory Failed Address */
76     uint32_t cache_ptag; /* 0x0048: I/O Cache Physical Tag */
77     uint32_t cache_ltag; /* 0x0050: I/O Cache Logical Tag */
78     uint32_t cache_bmask; /* 0x0058: I/O Cache Byte Mask */
79 
80     uint32_t nmi_interrupt; /* 0x0200: interrupt source */
81     uint32_t memory_refresh_rate; /* 0x0210: memory refresh rate */
82     uint32_t nvram_protect; /* 0x0220: NV ram protect register */
83     uint32_t rem_speed[16];
84     uint32_t imr_jazz; /* Local bus int enable mask */
85     uint32_t isr_jazz; /* Local bus int source */
86 
87     /* timer */
88     QEMUTimer *periodic_timer;
89     uint32_t itr; /* Interval timer reload */
90 
91     qemu_irq timer_irq;
92     qemu_irq jazz_bus_irq;
93 
94     /* whole DMA memory region, root of DMA address space */
95     IOMMUMemoryRegion dma_mr;
96     AddressSpace dma_as;
97 
98     MemoryRegion iomem_chipset;
99     MemoryRegion iomem_jazzio;
100 } rc4030State;
101 
102 static void set_next_tick(rc4030State *s)
103 {
104     uint32_t tm_hz;
105     qemu_irq_lower(s->timer_irq);
106 
107     tm_hz = 1000 / (s->itr + 1);
108 
109     timer_mod(s->periodic_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
110                    NANOSECONDS_PER_SECOND / tm_hz);
111 }
112 
113 /* called for accesses to rc4030 */
114 static uint64_t rc4030_read(void *opaque, hwaddr addr, unsigned int size)
115 {
116     rc4030State *s = opaque;
117     uint32_t val;
118 
119     addr &= 0x3fff;
120     switch (addr & ~0x3) {
121     /* Global config register */
122     case 0x0000:
123         val = s->config;
124         break;
125     /* Revision register */
126     case 0x0008:
127         val = s->revision;
128         break;
129     /* Invalid Address register */
130     case 0x0010:
131         val = s->invalid_address_register;
132         break;
133     /* DMA transl. table base */
134     case 0x0018:
135         val = s->dma_tl_base;
136         break;
137     /* DMA transl. table limit */
138     case 0x0020:
139         val = s->dma_tl_limit;
140         break;
141     /* Remote Failed Address */
142     case 0x0038:
143         val = s->remote_failed_address;
144         break;
145     /* Memory Failed Address */
146     case 0x0040:
147         val = s->memory_failed_address;
148         break;
149     /* I/O Cache Byte Mask */
150     case 0x0058:
151         val = s->cache_bmask;
152         /* HACK */
153         if (s->cache_bmask == (uint32_t)-1)
154             s->cache_bmask = 0;
155         break;
156     /* Remote Speed Registers */
157     case 0x0070:
158     case 0x0078:
159     case 0x0080:
160     case 0x0088:
161     case 0x0090:
162     case 0x0098:
163     case 0x00a0:
164     case 0x00a8:
165     case 0x00b0:
166     case 0x00b8:
167     case 0x00c0:
168     case 0x00c8:
169     case 0x00d0:
170     case 0x00d8:
171     case 0x00e0:
172     case 0x00e8:
173         val = s->rem_speed[(addr - 0x0070) >> 3];
174         break;
175     /* DMA channel base address */
176     case 0x0100:
177     case 0x0108:
178     case 0x0110:
179     case 0x0118:
180     case 0x0120:
181     case 0x0128:
182     case 0x0130:
183     case 0x0138:
184     case 0x0140:
185     case 0x0148:
186     case 0x0150:
187     case 0x0158:
188     case 0x0160:
189     case 0x0168:
190     case 0x0170:
191     case 0x0178:
192     case 0x0180:
193     case 0x0188:
194     case 0x0190:
195     case 0x0198:
196     case 0x01a0:
197     case 0x01a8:
198     case 0x01b0:
199     case 0x01b8:
200     case 0x01c0:
201     case 0x01c8:
202     case 0x01d0:
203     case 0x01d8:
204     case 0x01e0:
205     case 0x01e8:
206     case 0x01f0:
207     case 0x01f8:
208         {
209             int entry = (addr - 0x0100) >> 5;
210             int idx = (addr & 0x1f) >> 3;
211             val = s->dma_regs[entry][idx];
212         }
213         break;
214     /* Interrupt source */
215     case 0x0200:
216         val = s->nmi_interrupt;
217         break;
218     /* Error type */
219     case 0x0208:
220         val = 0;
221         break;
222     /* Memory refresh rate */
223     case 0x0210:
224         val = s->memory_refresh_rate;
225         break;
226     /* NV ram protect register */
227     case 0x0220:
228         val = s->nvram_protect;
229         break;
230     /* Interval timer count */
231     case 0x0230:
232         val = 0;
233         qemu_irq_lower(s->timer_irq);
234         break;
235     /* EISA interrupt */
236     case 0x0238:
237         val = 7; /* FIXME: should be read from EISA controller */
238         break;
239     default:
240         qemu_log_mask(LOG_GUEST_ERROR,
241                       "rc4030: invalid read at 0x%x", (int)addr);
242         val = 0;
243         break;
244     }
245 
246     if ((addr & ~3) != 0x230) {
247         trace_rc4030_read(addr, val);
248     }
249 
250     return val;
251 }
252 
253 static void rc4030_write(void *opaque, hwaddr addr, uint64_t data,
254                          unsigned int size)
255 {
256     rc4030State *s = opaque;
257     uint32_t val = data;
258     addr &= 0x3fff;
259 
260     trace_rc4030_write(addr, val);
261 
262     switch (addr & ~0x3) {
263     /* Global config register */
264     case 0x0000:
265         s->config = val;
266         break;
267     /* DMA transl. table base */
268     case 0x0018:
269         s->dma_tl_base = val;
270         break;
271     /* DMA transl. table limit */
272     case 0x0020:
273         s->dma_tl_limit = val;
274         break;
275     /* DMA transl. table invalidated */
276     case 0x0028:
277         break;
278     /* Cache Maintenance */
279     case 0x0030:
280         s->cache_maint = val;
281         break;
282     /* I/O Cache Physical Tag */
283     case 0x0048:
284         s->cache_ptag = val;
285         break;
286     /* I/O Cache Logical Tag */
287     case 0x0050:
288         s->cache_ltag = val;
289         break;
290     /* I/O Cache Byte Mask */
291     case 0x0058:
292         s->cache_bmask |= val; /* HACK */
293         break;
294     /* I/O Cache Buffer Window */
295     case 0x0060:
296         /* HACK */
297         if (s->cache_ltag == 0x80000001 && s->cache_bmask == 0xf0f0f0f) {
298             hwaddr dest = s->cache_ptag & ~0x1;
299             dest += (s->cache_maint & 0x3) << 3;
300             cpu_physical_memory_write(dest, &val, 4);
301         }
302         break;
303     /* Remote Speed Registers */
304     case 0x0070:
305     case 0x0078:
306     case 0x0080:
307     case 0x0088:
308     case 0x0090:
309     case 0x0098:
310     case 0x00a0:
311     case 0x00a8:
312     case 0x00b0:
313     case 0x00b8:
314     case 0x00c0:
315     case 0x00c8:
316     case 0x00d0:
317     case 0x00d8:
318     case 0x00e0:
319     case 0x00e8:
320         s->rem_speed[(addr - 0x0070) >> 3] = val;
321         break;
322     /* DMA channel base address */
323     case 0x0100:
324     case 0x0108:
325     case 0x0110:
326     case 0x0118:
327     case 0x0120:
328     case 0x0128:
329     case 0x0130:
330     case 0x0138:
331     case 0x0140:
332     case 0x0148:
333     case 0x0150:
334     case 0x0158:
335     case 0x0160:
336     case 0x0168:
337     case 0x0170:
338     case 0x0178:
339     case 0x0180:
340     case 0x0188:
341     case 0x0190:
342     case 0x0198:
343     case 0x01a0:
344     case 0x01a8:
345     case 0x01b0:
346     case 0x01b8:
347     case 0x01c0:
348     case 0x01c8:
349     case 0x01d0:
350     case 0x01d8:
351     case 0x01e0:
352     case 0x01e8:
353     case 0x01f0:
354     case 0x01f8:
355         {
356             int entry = (addr - 0x0100) >> 5;
357             int idx = (addr & 0x1f) >> 3;
358             s->dma_regs[entry][idx] = val;
359         }
360         break;
361     /* Memory refresh rate */
362     case 0x0210:
363         s->memory_refresh_rate = val;
364         break;
365     /* Interval timer reload */
366     case 0x0228:
367         s->itr = val & 0x01FF;
368         qemu_irq_lower(s->timer_irq);
369         set_next_tick(s);
370         break;
371     /* EISA interrupt */
372     case 0x0238:
373         break;
374     default:
375         qemu_log_mask(LOG_GUEST_ERROR,
376                       "rc4030: invalid write of 0x%02x at 0x%x",
377                       val, (int)addr);
378         break;
379     }
380 }
381 
382 static const MemoryRegionOps rc4030_ops = {
383     .read = rc4030_read,
384     .write = rc4030_write,
385     .impl.min_access_size = 4,
386     .impl.max_access_size = 4,
387     .endianness = DEVICE_NATIVE_ENDIAN,
388 };
389 
390 static void update_jazz_irq(rc4030State *s)
391 {
392     uint16_t pending;
393 
394     pending = s->isr_jazz & s->imr_jazz;
395 
396     if (pending != 0)
397         qemu_irq_raise(s->jazz_bus_irq);
398     else
399         qemu_irq_lower(s->jazz_bus_irq);
400 }
401 
402 static void rc4030_irq_jazz_request(void *opaque, int irq, int level)
403 {
404     rc4030State *s = opaque;
405 
406     if (level) {
407         s->isr_jazz |= 1 << irq;
408     } else {
409         s->isr_jazz &= ~(1 << irq);
410     }
411 
412     update_jazz_irq(s);
413 }
414 
415 static void rc4030_periodic_timer(void *opaque)
416 {
417     rc4030State *s = opaque;
418 
419     set_next_tick(s);
420     qemu_irq_raise(s->timer_irq);
421 }
422 
423 static uint64_t jazzio_read(void *opaque, hwaddr addr, unsigned int size)
424 {
425     rc4030State *s = opaque;
426     uint32_t val;
427     uint32_t irq;
428     addr &= 0xfff;
429 
430     switch (addr) {
431     /* Local bus int source */
432     case 0x00: {
433         uint32_t pending = s->isr_jazz & s->imr_jazz;
434         val = 0;
435         irq = 0;
436         while (pending) {
437             if (pending & 1) {
438                 val = (irq + 1) << 2;
439                 break;
440             }
441             irq++;
442             pending >>= 1;
443         }
444         break;
445     }
446     /* Local bus int enable mask */
447     case 0x02:
448         val = s->imr_jazz;
449         break;
450     default:
451         qemu_log_mask(LOG_GUEST_ERROR,
452                       "rc4030/jazzio: invalid read at 0x%x", (int)addr);
453         val = 0;
454         break;
455     }
456 
457     trace_jazzio_read(addr, val);
458 
459     return val;
460 }
461 
462 static void jazzio_write(void *opaque, hwaddr addr, uint64_t data,
463                          unsigned int size)
464 {
465     rc4030State *s = opaque;
466     uint32_t val = data;
467     addr &= 0xfff;
468 
469     trace_jazzio_write(addr, val);
470 
471     switch (addr) {
472     /* Local bus int enable mask */
473     case 0x02:
474         s->imr_jazz = val;
475         update_jazz_irq(s);
476         break;
477     default:
478         qemu_log_mask(LOG_GUEST_ERROR,
479                       "rc4030/jazzio: invalid write of 0x%02x at 0x%x",
480                       val, (int)addr);
481         break;
482     }
483 }
484 
485 static const MemoryRegionOps jazzio_ops = {
486     .read = jazzio_read,
487     .write = jazzio_write,
488     .impl.min_access_size = 2,
489     .impl.max_access_size = 2,
490     .endianness = DEVICE_NATIVE_ENDIAN,
491 };
492 
493 static IOMMUTLBEntry rc4030_dma_translate(IOMMUMemoryRegion *iommu, hwaddr addr,
494                                           IOMMUAccessFlags flag, int iommu_idx)
495 {
496     rc4030State *s = container_of(iommu, rc4030State, dma_mr);
497     IOMMUTLBEntry ret = {
498         .target_as = &address_space_memory,
499         .iova = addr & ~(DMA_PAGESIZE - 1),
500         .translated_addr = 0,
501         .addr_mask = DMA_PAGESIZE - 1,
502         .perm = IOMMU_NONE,
503     };
504     uint64_t i, entry_address;
505     dma_pagetable_entry entry;
506 
507     i = addr / DMA_PAGESIZE;
508     if (i < s->dma_tl_limit / sizeof(entry)) {
509         entry_address = (s->dma_tl_base & 0x7fffffff) + i * sizeof(entry);
510         if (address_space_read(ret.target_as, entry_address,
511                                MEMTXATTRS_UNSPECIFIED, (unsigned char *)&entry,
512                                sizeof(entry)) == MEMTX_OK) {
513             ret.translated_addr = entry.frame & ~(DMA_PAGESIZE - 1);
514             ret.perm = IOMMU_RW;
515         }
516     }
517 
518     return ret;
519 }
520 
521 static void rc4030_reset(DeviceState *dev)
522 {
523     rc4030State *s = RC4030(dev);
524     int i;
525 
526     s->config = 0x410; /* some boards seem to accept 0x104 too */
527     s->revision = 1;
528     s->invalid_address_register = 0;
529 
530     memset(s->dma_regs, 0, sizeof(s->dma_regs));
531 
532     s->remote_failed_address = s->memory_failed_address = 0;
533     s->cache_maint = 0;
534     s->cache_ptag = s->cache_ltag = 0;
535     s->cache_bmask = 0;
536 
537     s->memory_refresh_rate = 0x18186;
538     s->nvram_protect = 7;
539     for (i = 0; i < 15; i++)
540         s->rem_speed[i] = 7;
541     s->imr_jazz = 0x10; /* XXX: required by firmware, but why? */
542     s->isr_jazz = 0;
543 
544     s->itr = 0;
545 
546     qemu_irq_lower(s->timer_irq);
547     qemu_irq_lower(s->jazz_bus_irq);
548 }
549 
550 static int rc4030_post_load(void *opaque, int version_id)
551 {
552     rc4030State* s = opaque;
553 
554     set_next_tick(s);
555     update_jazz_irq(s);
556 
557     return 0;
558 }
559 
560 static const VMStateDescription vmstate_rc4030 = {
561     .name = "rc4030",
562     .version_id = 3,
563     .post_load = rc4030_post_load,
564     .fields = (VMStateField []) {
565         VMSTATE_UINT32(config, rc4030State),
566         VMSTATE_UINT32(invalid_address_register, rc4030State),
567         VMSTATE_UINT32_2DARRAY(dma_regs, rc4030State, 8, 4),
568         VMSTATE_UINT32(dma_tl_base, rc4030State),
569         VMSTATE_UINT32(dma_tl_limit, rc4030State),
570         VMSTATE_UINT32(cache_maint, rc4030State),
571         VMSTATE_UINT32(remote_failed_address, rc4030State),
572         VMSTATE_UINT32(memory_failed_address, rc4030State),
573         VMSTATE_UINT32(cache_ptag, rc4030State),
574         VMSTATE_UINT32(cache_ltag, rc4030State),
575         VMSTATE_UINT32(cache_bmask, rc4030State),
576         VMSTATE_UINT32(memory_refresh_rate, rc4030State),
577         VMSTATE_UINT32(nvram_protect, rc4030State),
578         VMSTATE_UINT32_ARRAY(rem_speed, rc4030State, 16),
579         VMSTATE_UINT32(imr_jazz, rc4030State),
580         VMSTATE_UINT32(isr_jazz, rc4030State),
581         VMSTATE_UINT32(itr, rc4030State),
582         VMSTATE_END_OF_LIST()
583     }
584 };
585 
586 static void rc4030_do_dma(void *opaque, int n, uint8_t *buf, int len, int is_write)
587 {
588     rc4030State *s = opaque;
589     hwaddr dma_addr;
590     int dev_to_mem;
591 
592     s->dma_regs[n][DMA_REG_ENABLE] &= ~(DMA_FLAG_TC_INTR | DMA_FLAG_MEM_INTR | DMA_FLAG_ADDR_INTR);
593 
594     /* Check DMA channel consistency */
595     dev_to_mem = (s->dma_regs[n][DMA_REG_ENABLE] & DMA_FLAG_MEM_TO_DEV) ? 0 : 1;
596     if (!(s->dma_regs[n][DMA_REG_ENABLE] & DMA_FLAG_ENABLE) ||
597         (is_write != dev_to_mem)) {
598         s->dma_regs[n][DMA_REG_ENABLE] |= DMA_FLAG_MEM_INTR;
599         s->nmi_interrupt |= 1 << n;
600         return;
601     }
602 
603     /* Get start address and len */
604     if (len > s->dma_regs[n][DMA_REG_COUNT])
605         len = s->dma_regs[n][DMA_REG_COUNT];
606     dma_addr = s->dma_regs[n][DMA_REG_ADDRESS];
607 
608     /* Read/write data at right place */
609     address_space_rw(&s->dma_as, dma_addr, MEMTXATTRS_UNSPECIFIED,
610                      buf, len, is_write);
611 
612     s->dma_regs[n][DMA_REG_ENABLE] |= DMA_FLAG_TC_INTR;
613     s->dma_regs[n][DMA_REG_COUNT] -= len;
614 }
615 
616 struct rc4030DMAState {
617     void *opaque;
618     int n;
619 };
620 
621 void rc4030_dma_read(void *dma, uint8_t *buf, int len)
622 {
623     rc4030_dma s = dma;
624     rc4030_do_dma(s->opaque, s->n, buf, len, 0);
625 }
626 
627 void rc4030_dma_write(void *dma, uint8_t *buf, int len)
628 {
629     rc4030_dma s = dma;
630     rc4030_do_dma(s->opaque, s->n, buf, len, 1);
631 }
632 
633 static rc4030_dma *rc4030_allocate_dmas(void *opaque, int n)
634 {
635     rc4030_dma *s;
636     struct rc4030DMAState *p;
637     int i;
638 
639     s = (rc4030_dma *)g_malloc0(sizeof(rc4030_dma) * n);
640     p = (struct rc4030DMAState *)g_malloc0(sizeof(struct rc4030DMAState) * n);
641     for (i = 0; i < n; i++) {
642         p->opaque = opaque;
643         p->n = i;
644         s[i] = p;
645         p++;
646     }
647     return s;
648 }
649 
650 static void rc4030_initfn(Object *obj)
651 {
652     DeviceState *dev = DEVICE(obj);
653     rc4030State *s = RC4030(obj);
654     SysBusDevice *sysbus = SYS_BUS_DEVICE(obj);
655 
656     qdev_init_gpio_in(dev, rc4030_irq_jazz_request, 16);
657 
658     sysbus_init_irq(sysbus, &s->timer_irq);
659     sysbus_init_irq(sysbus, &s->jazz_bus_irq);
660 
661     sysbus_init_mmio(sysbus, &s->iomem_chipset);
662     sysbus_init_mmio(sysbus, &s->iomem_jazzio);
663 }
664 
665 static void rc4030_realize(DeviceState *dev, Error **errp)
666 {
667     rc4030State *s = RC4030(dev);
668     Object *o = OBJECT(dev);
669 
670     s->periodic_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL,
671                                      rc4030_periodic_timer, s);
672 
673     memory_region_init_io(&s->iomem_chipset, NULL, &rc4030_ops, s,
674                           "rc4030.chipset", 0x300);
675     memory_region_init_io(&s->iomem_jazzio, NULL, &jazzio_ops, s,
676                           "rc4030.jazzio", 0x00001000);
677 
678     memory_region_init_iommu(&s->dma_mr, sizeof(s->dma_mr),
679                              TYPE_RC4030_IOMMU_MEMORY_REGION,
680                              o, "rc4030.dma", UINT32_MAX);
681     address_space_init(&s->dma_as, MEMORY_REGION(&s->dma_mr), "rc4030-dma");
682 }
683 
684 static void rc4030_unrealize(DeviceState *dev, Error **errp)
685 {
686     rc4030State *s = RC4030(dev);
687 
688     timer_free(s->periodic_timer);
689 
690     address_space_destroy(&s->dma_as);
691     object_unparent(OBJECT(&s->dma_mr));
692 }
693 
694 static void rc4030_class_init(ObjectClass *klass, void *class_data)
695 {
696     DeviceClass *dc = DEVICE_CLASS(klass);
697 
698     dc->realize = rc4030_realize;
699     dc->unrealize = rc4030_unrealize;
700     dc->reset = rc4030_reset;
701     dc->vmsd = &vmstate_rc4030;
702 }
703 
704 static const TypeInfo rc4030_info = {
705     .name = TYPE_RC4030,
706     .parent = TYPE_SYS_BUS_DEVICE,
707     .instance_size = sizeof(rc4030State),
708     .instance_init = rc4030_initfn,
709     .class_init = rc4030_class_init,
710 };
711 
712 static void rc4030_iommu_memory_region_class_init(ObjectClass *klass,
713                                                   void *data)
714 {
715     IOMMUMemoryRegionClass *imrc = IOMMU_MEMORY_REGION_CLASS(klass);
716 
717     imrc->translate = rc4030_dma_translate;
718 }
719 
720 static const TypeInfo rc4030_iommu_memory_region_info = {
721     .parent = TYPE_IOMMU_MEMORY_REGION,
722     .name = TYPE_RC4030_IOMMU_MEMORY_REGION,
723     .class_init = rc4030_iommu_memory_region_class_init,
724 };
725 
726 static void rc4030_register_types(void)
727 {
728     type_register_static(&rc4030_info);
729     type_register_static(&rc4030_iommu_memory_region_info);
730 }
731 
732 type_init(rc4030_register_types)
733 
734 DeviceState *rc4030_init(rc4030_dma **dmas, IOMMUMemoryRegion **dma_mr)
735 {
736     DeviceState *dev;
737 
738     dev = qdev_create(NULL, TYPE_RC4030);
739     qdev_init_nofail(dev);
740 
741     *dmas = rc4030_allocate_dmas(dev, 4);
742     *dma_mr = &RC4030(dev)->dma_mr;
743     return dev;
744 }
745