xref: /openbmc/qemu/hw/dma/rc4030.c (revision 67abc3dd)
1 /*
2  * QEMU JAZZ RC4030 chipset
3  *
4  * Copyright (c) 2007-2013 Hervé Poussineau
5  *
6  * Permission is hereby granted, free of charge, to any person obtaining a copy
7  * of this software and associated documentation files (the "Software"), to deal
8  * in the Software without restriction, including without limitation the rights
9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10  * copies of the Software, and to permit persons to whom the Software is
11  * furnished to do so, subject to the following conditions:
12  *
13  * The above copyright notice and this permission notice shall be included in
14  * all copies or substantial portions of the Software.
15  *
16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22  * THE SOFTWARE.
23  */
24 
25 #include "qemu/osdep.h"
26 #include "qemu/units.h"
27 #include "hw/irq.h"
28 #include "hw/mips/mips.h"
29 #include "hw/sysbus.h"
30 #include "migration/vmstate.h"
31 #include "qapi/error.h"
32 #include "qemu/timer.h"
33 #include "qemu/log.h"
34 #include "qemu/module.h"
35 #include "exec/address-spaces.h"
36 #include "trace.h"
37 
38 /********************************************************/
39 /* rc4030 emulation                                     */
40 
41 typedef struct dma_pagetable_entry {
42     int32_t frame;
43     int32_t owner;
44 } QEMU_PACKED dma_pagetable_entry;
45 
46 #define DMA_PAGESIZE    4096
47 #define DMA_REG_ENABLE  1
48 #define DMA_REG_COUNT   2
49 #define DMA_REG_ADDRESS 3
50 
51 #define DMA_FLAG_ENABLE     0x0001
52 #define DMA_FLAG_MEM_TO_DEV 0x0002
53 #define DMA_FLAG_TC_INTR    0x0100
54 #define DMA_FLAG_MEM_INTR   0x0200
55 #define DMA_FLAG_ADDR_INTR  0x0400
56 
57 #define TYPE_RC4030 "rc4030"
58 #define RC4030(obj) \
59     OBJECT_CHECK(rc4030State, (obj), TYPE_RC4030)
60 
61 #define TYPE_RC4030_IOMMU_MEMORY_REGION "rc4030-iommu-memory-region"
62 
63 typedef struct rc4030State {
64 
65     SysBusDevice parent;
66 
67     uint32_t config; /* 0x0000: RC4030 config register */
68     uint32_t revision; /* 0x0008: RC4030 Revision register */
69     uint32_t invalid_address_register; /* 0x0010: Invalid Address register */
70 
71     /* DMA */
72     uint32_t dma_regs[8][4];
73     uint32_t dma_tl_base; /* 0x0018: DMA transl. table base */
74     uint32_t dma_tl_limit; /* 0x0020: DMA transl. table limit */
75 
76     /* cache */
77     uint32_t cache_maint; /* 0x0030: Cache Maintenance */
78     uint32_t remote_failed_address; /* 0x0038: Remote Failed Address */
79     uint32_t memory_failed_address; /* 0x0040: Memory Failed Address */
80     uint32_t cache_ptag; /* 0x0048: I/O Cache Physical Tag */
81     uint32_t cache_ltag; /* 0x0050: I/O Cache Logical Tag */
82     uint32_t cache_bmask; /* 0x0058: I/O Cache Byte Mask */
83 
84     uint32_t nmi_interrupt; /* 0x0200: interrupt source */
85     uint32_t memory_refresh_rate; /* 0x0210: memory refresh rate */
86     uint32_t nvram_protect; /* 0x0220: NV ram protect register */
87     uint32_t rem_speed[16];
88     uint32_t imr_jazz; /* Local bus int enable mask */
89     uint32_t isr_jazz; /* Local bus int source */
90 
91     /* timer */
92     QEMUTimer *periodic_timer;
93     uint32_t itr; /* Interval timer reload */
94 
95     qemu_irq timer_irq;
96     qemu_irq jazz_bus_irq;
97 
98     /* whole DMA memory region, root of DMA address space */
99     IOMMUMemoryRegion dma_mr;
100     AddressSpace dma_as;
101 
102     MemoryRegion iomem_chipset;
103     MemoryRegion iomem_jazzio;
104 } rc4030State;
105 
106 static void set_next_tick(rc4030State *s)
107 {
108     uint32_t tm_hz;
109     qemu_irq_lower(s->timer_irq);
110 
111     tm_hz = 1000 / (s->itr + 1);
112 
113     timer_mod(s->periodic_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
114                    NANOSECONDS_PER_SECOND / tm_hz);
115 }
116 
117 /* called for accesses to rc4030 */
118 static uint64_t rc4030_read(void *opaque, hwaddr addr, unsigned int size)
119 {
120     rc4030State *s = opaque;
121     uint32_t val;
122 
123     addr &= 0x3fff;
124     switch (addr & ~0x3) {
125     /* Global config register */
126     case 0x0000:
127         val = s->config;
128         break;
129     /* Revision register */
130     case 0x0008:
131         val = s->revision;
132         break;
133     /* Invalid Address register */
134     case 0x0010:
135         val = s->invalid_address_register;
136         break;
137     /* DMA transl. table base */
138     case 0x0018:
139         val = s->dma_tl_base;
140         break;
141     /* DMA transl. table limit */
142     case 0x0020:
143         val = s->dma_tl_limit;
144         break;
145     /* Remote Failed Address */
146     case 0x0038:
147         val = s->remote_failed_address;
148         break;
149     /* Memory Failed Address */
150     case 0x0040:
151         val = s->memory_failed_address;
152         break;
153     /* I/O Cache Byte Mask */
154     case 0x0058:
155         val = s->cache_bmask;
156         /* HACK */
157         if (s->cache_bmask == (uint32_t)-1) {
158             s->cache_bmask = 0;
159         }
160         break;
161     /* Remote Speed Registers */
162     case 0x0070:
163     case 0x0078:
164     case 0x0080:
165     case 0x0088:
166     case 0x0090:
167     case 0x0098:
168     case 0x00a0:
169     case 0x00a8:
170     case 0x00b0:
171     case 0x00b8:
172     case 0x00c0:
173     case 0x00c8:
174     case 0x00d0:
175     case 0x00d8:
176     case 0x00e0:
177     case 0x00e8:
178         val = s->rem_speed[(addr - 0x0070) >> 3];
179         break;
180     /* DMA channel base address */
181     case 0x0100:
182     case 0x0108:
183     case 0x0110:
184     case 0x0118:
185     case 0x0120:
186     case 0x0128:
187     case 0x0130:
188     case 0x0138:
189     case 0x0140:
190     case 0x0148:
191     case 0x0150:
192     case 0x0158:
193     case 0x0160:
194     case 0x0168:
195     case 0x0170:
196     case 0x0178:
197     case 0x0180:
198     case 0x0188:
199     case 0x0190:
200     case 0x0198:
201     case 0x01a0:
202     case 0x01a8:
203     case 0x01b0:
204     case 0x01b8:
205     case 0x01c0:
206     case 0x01c8:
207     case 0x01d0:
208     case 0x01d8:
209     case 0x01e0:
210     case 0x01e8:
211     case 0x01f0:
212     case 0x01f8:
213         {
214             int entry = (addr - 0x0100) >> 5;
215             int idx = (addr & 0x1f) >> 3;
216             val = s->dma_regs[entry][idx];
217         }
218         break;
219     /* Interrupt source */
220     case 0x0200:
221         val = s->nmi_interrupt;
222         break;
223     /* Error type */
224     case 0x0208:
225         val = 0;
226         break;
227     /* Memory refresh rate */
228     case 0x0210:
229         val = s->memory_refresh_rate;
230         break;
231     /* NV ram protect register */
232     case 0x0220:
233         val = s->nvram_protect;
234         break;
235     /* Interval timer count */
236     case 0x0230:
237         val = 0;
238         qemu_irq_lower(s->timer_irq);
239         break;
240     /* EISA interrupt */
241     case 0x0238:
242         val = 7; /* FIXME: should be read from EISA controller */
243         break;
244     default:
245         qemu_log_mask(LOG_GUEST_ERROR,
246                       "rc4030: invalid read at 0x%x", (int)addr);
247         val = 0;
248         break;
249     }
250 
251     if ((addr & ~3) != 0x230) {
252         trace_rc4030_read(addr, val);
253     }
254 
255     return val;
256 }
257 
258 static void rc4030_write(void *opaque, hwaddr addr, uint64_t data,
259                          unsigned int size)
260 {
261     rc4030State *s = opaque;
262     uint32_t val = data;
263     addr &= 0x3fff;
264 
265     trace_rc4030_write(addr, val);
266 
267     switch (addr & ~0x3) {
268     /* Global config register */
269     case 0x0000:
270         s->config = val;
271         break;
272     /* DMA transl. table base */
273     case 0x0018:
274         s->dma_tl_base = val;
275         break;
276     /* DMA transl. table limit */
277     case 0x0020:
278         s->dma_tl_limit = val;
279         break;
280     /* DMA transl. table invalidated */
281     case 0x0028:
282         break;
283     /* Cache Maintenance */
284     case 0x0030:
285         s->cache_maint = val;
286         break;
287     /* I/O Cache Physical Tag */
288     case 0x0048:
289         s->cache_ptag = val;
290         break;
291     /* I/O Cache Logical Tag */
292     case 0x0050:
293         s->cache_ltag = val;
294         break;
295     /* I/O Cache Byte Mask */
296     case 0x0058:
297         s->cache_bmask |= val; /* HACK */
298         break;
299     /* I/O Cache Buffer Window */
300     case 0x0060:
301         /* HACK */
302         if (s->cache_ltag == 0x80000001 && s->cache_bmask == 0xf0f0f0f) {
303             hwaddr dest = s->cache_ptag & ~0x1;
304             dest += (s->cache_maint & 0x3) << 3;
305             cpu_physical_memory_write(dest, &val, 4);
306         }
307         break;
308     /* Remote Speed Registers */
309     case 0x0070:
310     case 0x0078:
311     case 0x0080:
312     case 0x0088:
313     case 0x0090:
314     case 0x0098:
315     case 0x00a0:
316     case 0x00a8:
317     case 0x00b0:
318     case 0x00b8:
319     case 0x00c0:
320     case 0x00c8:
321     case 0x00d0:
322     case 0x00d8:
323     case 0x00e0:
324     case 0x00e8:
325         s->rem_speed[(addr - 0x0070) >> 3] = val;
326         break;
327     /* DMA channel base address */
328     case 0x0100:
329     case 0x0108:
330     case 0x0110:
331     case 0x0118:
332     case 0x0120:
333     case 0x0128:
334     case 0x0130:
335     case 0x0138:
336     case 0x0140:
337     case 0x0148:
338     case 0x0150:
339     case 0x0158:
340     case 0x0160:
341     case 0x0168:
342     case 0x0170:
343     case 0x0178:
344     case 0x0180:
345     case 0x0188:
346     case 0x0190:
347     case 0x0198:
348     case 0x01a0:
349     case 0x01a8:
350     case 0x01b0:
351     case 0x01b8:
352     case 0x01c0:
353     case 0x01c8:
354     case 0x01d0:
355     case 0x01d8:
356     case 0x01e0:
357     case 0x01e8:
358     case 0x01f0:
359     case 0x01f8:
360         {
361             int entry = (addr - 0x0100) >> 5;
362             int idx = (addr & 0x1f) >> 3;
363             s->dma_regs[entry][idx] = val;
364         }
365         break;
366     /* Memory refresh rate */
367     case 0x0210:
368         s->memory_refresh_rate = val;
369         break;
370     /* Interval timer reload */
371     case 0x0228:
372         s->itr = val & 0x01FF;
373         qemu_irq_lower(s->timer_irq);
374         set_next_tick(s);
375         break;
376     /* EISA interrupt */
377     case 0x0238:
378         break;
379     default:
380         qemu_log_mask(LOG_GUEST_ERROR,
381                       "rc4030: invalid write of 0x%02x at 0x%x",
382                       val, (int)addr);
383         break;
384     }
385 }
386 
387 static const MemoryRegionOps rc4030_ops = {
388     .read = rc4030_read,
389     .write = rc4030_write,
390     .impl.min_access_size = 4,
391     .impl.max_access_size = 4,
392     .endianness = DEVICE_NATIVE_ENDIAN,
393 };
394 
395 static void update_jazz_irq(rc4030State *s)
396 {
397     uint16_t pending;
398 
399     pending = s->isr_jazz & s->imr_jazz;
400 
401     if (pending != 0) {
402         qemu_irq_raise(s->jazz_bus_irq);
403     } else {
404         qemu_irq_lower(s->jazz_bus_irq);
405     }
406 }
407 
408 static void rc4030_irq_jazz_request(void *opaque, int irq, int level)
409 {
410     rc4030State *s = opaque;
411 
412     if (level) {
413         s->isr_jazz |= 1 << irq;
414     } else {
415         s->isr_jazz &= ~(1 << irq);
416     }
417 
418     update_jazz_irq(s);
419 }
420 
421 static void rc4030_periodic_timer(void *opaque)
422 {
423     rc4030State *s = opaque;
424 
425     set_next_tick(s);
426     qemu_irq_raise(s->timer_irq);
427 }
428 
429 static uint64_t jazzio_read(void *opaque, hwaddr addr, unsigned int size)
430 {
431     rc4030State *s = opaque;
432     uint32_t val;
433     uint32_t irq;
434     addr &= 0xfff;
435 
436     switch (addr) {
437     /* Local bus int source */
438     case 0x00: {
439         uint32_t pending = s->isr_jazz & s->imr_jazz;
440         val = 0;
441         irq = 0;
442         while (pending) {
443             if (pending & 1) {
444                 val = (irq + 1) << 2;
445                 break;
446             }
447             irq++;
448             pending >>= 1;
449         }
450         break;
451     }
452     /* Local bus int enable mask */
453     case 0x02:
454         val = s->imr_jazz;
455         break;
456     default:
457         qemu_log_mask(LOG_GUEST_ERROR,
458                       "rc4030/jazzio: invalid read at 0x%x", (int)addr);
459         val = 0;
460         break;
461     }
462 
463     trace_jazzio_read(addr, val);
464 
465     return val;
466 }
467 
468 static void jazzio_write(void *opaque, hwaddr addr, uint64_t data,
469                          unsigned int size)
470 {
471     rc4030State *s = opaque;
472     uint32_t val = data;
473     addr &= 0xfff;
474 
475     trace_jazzio_write(addr, val);
476 
477     switch (addr) {
478     /* Local bus int enable mask */
479     case 0x02:
480         s->imr_jazz = val;
481         update_jazz_irq(s);
482         break;
483     default:
484         qemu_log_mask(LOG_GUEST_ERROR,
485                       "rc4030/jazzio: invalid write of 0x%02x at 0x%x",
486                       val, (int)addr);
487         break;
488     }
489 }
490 
491 static const MemoryRegionOps jazzio_ops = {
492     .read = jazzio_read,
493     .write = jazzio_write,
494     .impl.min_access_size = 2,
495     .impl.max_access_size = 2,
496     .endianness = DEVICE_NATIVE_ENDIAN,
497 };
498 
499 static IOMMUTLBEntry rc4030_dma_translate(IOMMUMemoryRegion *iommu, hwaddr addr,
500                                           IOMMUAccessFlags flag, int iommu_idx)
501 {
502     rc4030State *s = container_of(iommu, rc4030State, dma_mr);
503     IOMMUTLBEntry ret = {
504         .target_as = &address_space_memory,
505         .iova = addr & ~(DMA_PAGESIZE - 1),
506         .translated_addr = 0,
507         .addr_mask = DMA_PAGESIZE - 1,
508         .perm = IOMMU_NONE,
509     };
510     uint64_t i, entry_address;
511     dma_pagetable_entry entry;
512 
513     i = addr / DMA_PAGESIZE;
514     if (i < s->dma_tl_limit / sizeof(entry)) {
515         entry_address = (s->dma_tl_base & 0x7fffffff) + i * sizeof(entry);
516         if (address_space_read(ret.target_as, entry_address,
517                                MEMTXATTRS_UNSPECIFIED, &entry, sizeof(entry))
518                 == MEMTX_OK) {
519             ret.translated_addr = entry.frame & ~(DMA_PAGESIZE - 1);
520             ret.perm = IOMMU_RW;
521         }
522     }
523 
524     return ret;
525 }
526 
527 static void rc4030_reset(DeviceState *dev)
528 {
529     rc4030State *s = RC4030(dev);
530     int i;
531 
532     s->config = 0x410; /* some boards seem to accept 0x104 too */
533     s->revision = 1;
534     s->invalid_address_register = 0;
535 
536     memset(s->dma_regs, 0, sizeof(s->dma_regs));
537 
538     s->remote_failed_address = s->memory_failed_address = 0;
539     s->cache_maint = 0;
540     s->cache_ptag = s->cache_ltag = 0;
541     s->cache_bmask = 0;
542 
543     s->memory_refresh_rate = 0x18186;
544     s->nvram_protect = 7;
545     for (i = 0; i < 15; i++) {
546         s->rem_speed[i] = 7;
547     }
548     s->imr_jazz = 0x10; /* XXX: required by firmware, but why? */
549     s->isr_jazz = 0;
550 
551     s->itr = 0;
552 
553     qemu_irq_lower(s->timer_irq);
554     qemu_irq_lower(s->jazz_bus_irq);
555 }
556 
557 static int rc4030_post_load(void *opaque, int version_id)
558 {
559     rc4030State *s = opaque;
560 
561     set_next_tick(s);
562     update_jazz_irq(s);
563 
564     return 0;
565 }
566 
567 static const VMStateDescription vmstate_rc4030 = {
568     .name = "rc4030",
569     .version_id = 3,
570     .post_load = rc4030_post_load,
571     .fields = (VMStateField []) {
572         VMSTATE_UINT32(config, rc4030State),
573         VMSTATE_UINT32(invalid_address_register, rc4030State),
574         VMSTATE_UINT32_2DARRAY(dma_regs, rc4030State, 8, 4),
575         VMSTATE_UINT32(dma_tl_base, rc4030State),
576         VMSTATE_UINT32(dma_tl_limit, rc4030State),
577         VMSTATE_UINT32(cache_maint, rc4030State),
578         VMSTATE_UINT32(remote_failed_address, rc4030State),
579         VMSTATE_UINT32(memory_failed_address, rc4030State),
580         VMSTATE_UINT32(cache_ptag, rc4030State),
581         VMSTATE_UINT32(cache_ltag, rc4030State),
582         VMSTATE_UINT32(cache_bmask, rc4030State),
583         VMSTATE_UINT32(memory_refresh_rate, rc4030State),
584         VMSTATE_UINT32(nvram_protect, rc4030State),
585         VMSTATE_UINT32_ARRAY(rem_speed, rc4030State, 16),
586         VMSTATE_UINT32(imr_jazz, rc4030State),
587         VMSTATE_UINT32(isr_jazz, rc4030State),
588         VMSTATE_UINT32(itr, rc4030State),
589         VMSTATE_END_OF_LIST()
590     }
591 };
592 
593 static void rc4030_do_dma(void *opaque, int n, uint8_t *buf,
594                           int len, bool is_write)
595 {
596     rc4030State *s = opaque;
597     hwaddr dma_addr;
598     int dev_to_mem;
599 
600     s->dma_regs[n][DMA_REG_ENABLE] &=
601            ~(DMA_FLAG_TC_INTR | DMA_FLAG_MEM_INTR | DMA_FLAG_ADDR_INTR);
602 
603     /* Check DMA channel consistency */
604     dev_to_mem = (s->dma_regs[n][DMA_REG_ENABLE] & DMA_FLAG_MEM_TO_DEV) ? 0 : 1;
605     if (!(s->dma_regs[n][DMA_REG_ENABLE] & DMA_FLAG_ENABLE) ||
606         (is_write != dev_to_mem)) {
607         s->dma_regs[n][DMA_REG_ENABLE] |= DMA_FLAG_MEM_INTR;
608         s->nmi_interrupt |= 1 << n;
609         return;
610     }
611 
612     /* Get start address and len */
613     if (len > s->dma_regs[n][DMA_REG_COUNT]) {
614         len = s->dma_regs[n][DMA_REG_COUNT];
615     }
616     dma_addr = s->dma_regs[n][DMA_REG_ADDRESS];
617 
618     /* Read/write data at right place */
619     address_space_rw(&s->dma_as, dma_addr, MEMTXATTRS_UNSPECIFIED,
620                      buf, len, is_write);
621 
622     s->dma_regs[n][DMA_REG_ENABLE] |= DMA_FLAG_TC_INTR;
623     s->dma_regs[n][DMA_REG_COUNT] -= len;
624 }
625 
626 struct rc4030DMAState {
627     void *opaque;
628     int n;
629 };
630 
631 void rc4030_dma_read(void *dma, uint8_t *buf, int len)
632 {
633     rc4030_dma s = dma;
634     rc4030_do_dma(s->opaque, s->n, buf, len, false);
635 }
636 
637 void rc4030_dma_write(void *dma, uint8_t *buf, int len)
638 {
639     rc4030_dma s = dma;
640     rc4030_do_dma(s->opaque, s->n, buf, len, true);
641 }
642 
643 static rc4030_dma *rc4030_allocate_dmas(void *opaque, int n)
644 {
645     rc4030_dma *s;
646     struct rc4030DMAState *p;
647     int i;
648 
649     s = (rc4030_dma *)g_new0(rc4030_dma, n);
650     p = (struct rc4030DMAState *)g_new0(struct rc4030DMAState, n);
651     for (i = 0; i < n; i++) {
652         p->opaque = opaque;
653         p->n = i;
654         s[i] = p;
655         p++;
656     }
657     return s;
658 }
659 
660 static void rc4030_initfn(Object *obj)
661 {
662     DeviceState *dev = DEVICE(obj);
663     rc4030State *s = RC4030(obj);
664     SysBusDevice *sysbus = SYS_BUS_DEVICE(obj);
665 
666     qdev_init_gpio_in(dev, rc4030_irq_jazz_request, 16);
667 
668     sysbus_init_irq(sysbus, &s->timer_irq);
669     sysbus_init_irq(sysbus, &s->jazz_bus_irq);
670 
671     sysbus_init_mmio(sysbus, &s->iomem_chipset);
672     sysbus_init_mmio(sysbus, &s->iomem_jazzio);
673 }
674 
675 static void rc4030_realize(DeviceState *dev, Error **errp)
676 {
677     rc4030State *s = RC4030(dev);
678     Object *o = OBJECT(dev);
679 
680     s->periodic_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL,
681                                      rc4030_periodic_timer, s);
682 
683     memory_region_init_io(&s->iomem_chipset, o, &rc4030_ops, s,
684                           "rc4030.chipset", 0x300);
685     memory_region_init_io(&s->iomem_jazzio, o, &jazzio_ops, s,
686                           "rc4030.jazzio", 0x00001000);
687 
688     memory_region_init_iommu(&s->dma_mr, sizeof(s->dma_mr),
689                              TYPE_RC4030_IOMMU_MEMORY_REGION,
690                              o, "rc4030.dma", 4 * GiB);
691     address_space_init(&s->dma_as, MEMORY_REGION(&s->dma_mr), "rc4030-dma");
692 }
693 
694 static void rc4030_unrealize(DeviceState *dev)
695 {
696     rc4030State *s = RC4030(dev);
697 
698     timer_free(s->periodic_timer);
699 
700     address_space_destroy(&s->dma_as);
701     object_unparent(OBJECT(&s->dma_mr));
702 }
703 
704 static void rc4030_class_init(ObjectClass *klass, void *class_data)
705 {
706     DeviceClass *dc = DEVICE_CLASS(klass);
707 
708     dc->realize = rc4030_realize;
709     dc->unrealize = rc4030_unrealize;
710     dc->reset = rc4030_reset;
711     dc->vmsd = &vmstate_rc4030;
712 }
713 
714 static const TypeInfo rc4030_info = {
715     .name = TYPE_RC4030,
716     .parent = TYPE_SYS_BUS_DEVICE,
717     .instance_size = sizeof(rc4030State),
718     .instance_init = rc4030_initfn,
719     .class_init = rc4030_class_init,
720 };
721 
722 static void rc4030_iommu_memory_region_class_init(ObjectClass *klass,
723                                                   void *data)
724 {
725     IOMMUMemoryRegionClass *imrc = IOMMU_MEMORY_REGION_CLASS(klass);
726 
727     imrc->translate = rc4030_dma_translate;
728 }
729 
730 static const TypeInfo rc4030_iommu_memory_region_info = {
731     .parent = TYPE_IOMMU_MEMORY_REGION,
732     .name = TYPE_RC4030_IOMMU_MEMORY_REGION,
733     .class_init = rc4030_iommu_memory_region_class_init,
734 };
735 
736 static void rc4030_register_types(void)
737 {
738     type_register_static(&rc4030_info);
739     type_register_static(&rc4030_iommu_memory_region_info);
740 }
741 
742 type_init(rc4030_register_types)
743 
744 DeviceState *rc4030_init(rc4030_dma **dmas, IOMMUMemoryRegion **dma_mr)
745 {
746     DeviceState *dev;
747 
748     dev = qdev_new(TYPE_RC4030);
749     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
750 
751     *dmas = rc4030_allocate_dmas(dev, 4);
752     *dma_mr = &RC4030(dev)->dma_mr;
753     return dev;
754 }
755