1 /*
2 * QEMU JAZZ RC4030 chipset
3 *
4 * Copyright (c) 2007-2013 Hervé Poussineau
5 *
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
12 *
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
15 *
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
23 */
24
25 #include "qemu/osdep.h"
26 #include "qemu/units.h"
27 #include "hw/irq.h"
28 #include "hw/mips/mips.h"
29 #include "hw/sysbus.h"
30 #include "migration/vmstate.h"
31 #include "qapi/error.h"
32 #include "qemu/timer.h"
33 #include "qemu/log.h"
34 #include "qemu/module.h"
35 #include "exec/address-spaces.h"
36 #include "trace.h"
37 #include "qom/object.h"
38
39 /********************************************************/
40 /* rc4030 emulation */
41
42 typedef struct dma_pagetable_entry {
43 int32_t frame;
44 int32_t owner;
45 } QEMU_PACKED dma_pagetable_entry;
46
47 #define DMA_PAGESIZE 4096
48 #define DMA_REG_ENABLE 1
49 #define DMA_REG_COUNT 2
50 #define DMA_REG_ADDRESS 3
51
52 #define DMA_FLAG_ENABLE 0x0001
53 #define DMA_FLAG_MEM_TO_DEV 0x0002
54 #define DMA_FLAG_TC_INTR 0x0100
55 #define DMA_FLAG_MEM_INTR 0x0200
56 #define DMA_FLAG_ADDR_INTR 0x0400
57
58 #define TYPE_RC4030 "rc4030"
59 OBJECT_DECLARE_SIMPLE_TYPE(rc4030State, RC4030)
60
61 #define TYPE_RC4030_IOMMU_MEMORY_REGION "rc4030-iommu-memory-region"
62
63 struct rc4030State {
64
65 SysBusDevice parent;
66
67 uint32_t config; /* 0x0000: RC4030 config register */
68 uint32_t revision; /* 0x0008: RC4030 Revision register */
69 uint32_t invalid_address_register; /* 0x0010: Invalid Address register */
70
71 /* DMA */
72 uint32_t dma_regs[8][4];
73 uint32_t dma_tl_base; /* 0x0018: DMA transl. table base */
74 uint32_t dma_tl_limit; /* 0x0020: DMA transl. table limit */
75
76 /* cache */
77 uint32_t cache_maint; /* 0x0030: Cache Maintenance */
78 uint32_t remote_failed_address; /* 0x0038: Remote Failed Address */
79 uint32_t memory_failed_address; /* 0x0040: Memory Failed Address */
80 uint32_t cache_ptag; /* 0x0048: I/O Cache Physical Tag */
81 uint32_t cache_ltag; /* 0x0050: I/O Cache Logical Tag */
82 uint32_t cache_bmask; /* 0x0058: I/O Cache Byte Mask */
83
84 uint32_t nmi_interrupt; /* 0x0200: interrupt source */
85 uint32_t memory_refresh_rate; /* 0x0210: memory refresh rate */
86 uint32_t nvram_protect; /* 0x0220: NV ram protect register */
87 uint32_t rem_speed[16];
88 uint32_t imr_jazz; /* Local bus int enable mask */
89 uint32_t isr_jazz; /* Local bus int source */
90
91 /* timer */
92 QEMUTimer *periodic_timer;
93 uint32_t itr; /* Interval timer reload */
94
95 qemu_irq timer_irq;
96 qemu_irq jazz_bus_irq;
97
98 /* whole DMA memory region, root of DMA address space */
99 IOMMUMemoryRegion dma_mr;
100 AddressSpace dma_as;
101
102 MemoryRegion iomem_chipset;
103 MemoryRegion iomem_jazzio;
104 };
105
set_next_tick(rc4030State * s)106 static void set_next_tick(rc4030State *s)
107 {
108 uint32_t tm_hz;
109 qemu_irq_lower(s->timer_irq);
110
111 tm_hz = 1000 / (s->itr + 1);
112
113 timer_mod(s->periodic_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
114 NANOSECONDS_PER_SECOND / tm_hz);
115 }
116
117 /* called for accesses to rc4030 */
rc4030_read(void * opaque,hwaddr addr,unsigned int size)118 static uint64_t rc4030_read(void *opaque, hwaddr addr, unsigned int size)
119 {
120 rc4030State *s = opaque;
121 uint32_t val;
122
123 addr &= 0x3fff;
124 switch (addr & ~0x3) {
125 /* Global config register */
126 case 0x0000:
127 val = s->config;
128 break;
129 /* Revision register */
130 case 0x0008:
131 val = s->revision;
132 break;
133 /* Invalid Address register */
134 case 0x0010:
135 val = s->invalid_address_register;
136 break;
137 /* DMA transl. table base */
138 case 0x0018:
139 val = s->dma_tl_base;
140 break;
141 /* DMA transl. table limit */
142 case 0x0020:
143 val = s->dma_tl_limit;
144 break;
145 /* Remote Failed Address */
146 case 0x0038:
147 val = s->remote_failed_address;
148 break;
149 /* Memory Failed Address */
150 case 0x0040:
151 val = s->memory_failed_address;
152 break;
153 /* I/O Cache Byte Mask */
154 case 0x0058:
155 val = s->cache_bmask;
156 /* HACK */
157 if (s->cache_bmask == (uint32_t)-1) {
158 s->cache_bmask = 0;
159 }
160 break;
161 /* Remote Speed Registers */
162 case 0x0070:
163 case 0x0078:
164 case 0x0080:
165 case 0x0088:
166 case 0x0090:
167 case 0x0098:
168 case 0x00a0:
169 case 0x00a8:
170 case 0x00b0:
171 case 0x00b8:
172 case 0x00c0:
173 case 0x00c8:
174 case 0x00d0:
175 case 0x00d8:
176 case 0x00e0:
177 case 0x00e8:
178 val = s->rem_speed[(addr - 0x0070) >> 3];
179 break;
180 /* DMA channel base address */
181 case 0x0100:
182 case 0x0108:
183 case 0x0110:
184 case 0x0118:
185 case 0x0120:
186 case 0x0128:
187 case 0x0130:
188 case 0x0138:
189 case 0x0140:
190 case 0x0148:
191 case 0x0150:
192 case 0x0158:
193 case 0x0160:
194 case 0x0168:
195 case 0x0170:
196 case 0x0178:
197 case 0x0180:
198 case 0x0188:
199 case 0x0190:
200 case 0x0198:
201 case 0x01a0:
202 case 0x01a8:
203 case 0x01b0:
204 case 0x01b8:
205 case 0x01c0:
206 case 0x01c8:
207 case 0x01d0:
208 case 0x01d8:
209 case 0x01e0:
210 case 0x01e8:
211 case 0x01f0:
212 case 0x01f8:
213 {
214 int entry = (addr - 0x0100) >> 5;
215 int idx = (addr & 0x1f) >> 3;
216 val = s->dma_regs[entry][idx];
217 }
218 break;
219 /* Interrupt source */
220 case 0x0200:
221 val = s->nmi_interrupt;
222 break;
223 /* Error type */
224 case 0x0208:
225 val = 0;
226 break;
227 /* Memory refresh rate */
228 case 0x0210:
229 val = s->memory_refresh_rate;
230 break;
231 /* NV ram protect register */
232 case 0x0220:
233 val = s->nvram_protect;
234 break;
235 /* Interval timer count */
236 case 0x0230:
237 val = 0;
238 qemu_irq_lower(s->timer_irq);
239 break;
240 /* EISA interrupt */
241 case 0x0238:
242 val = 7; /* FIXME: should be read from EISA controller */
243 break;
244 default:
245 qemu_log_mask(LOG_GUEST_ERROR,
246 "rc4030: invalid read at 0x%x", (int)addr);
247 val = 0;
248 break;
249 }
250
251 if ((addr & ~3) != 0x230) {
252 trace_rc4030_read(addr, val);
253 }
254
255 return val;
256 }
257
rc4030_write(void * opaque,hwaddr addr,uint64_t data,unsigned int size)258 static void rc4030_write(void *opaque, hwaddr addr, uint64_t data,
259 unsigned int size)
260 {
261 rc4030State *s = opaque;
262 uint32_t val = data;
263 addr &= 0x3fff;
264
265 trace_rc4030_write(addr, val);
266
267 switch (addr & ~0x3) {
268 /* Global config register */
269 case 0x0000:
270 s->config = val;
271 break;
272 /* DMA transl. table base */
273 case 0x0018:
274 s->dma_tl_base = val;
275 break;
276 /* DMA transl. table limit */
277 case 0x0020:
278 s->dma_tl_limit = val;
279 break;
280 /* DMA transl. table invalidated */
281 case 0x0028:
282 break;
283 /* Cache Maintenance */
284 case 0x0030:
285 s->cache_maint = val;
286 break;
287 /* I/O Cache Physical Tag */
288 case 0x0048:
289 s->cache_ptag = val;
290 break;
291 /* I/O Cache Logical Tag */
292 case 0x0050:
293 s->cache_ltag = val;
294 break;
295 /* I/O Cache Byte Mask */
296 case 0x0058:
297 s->cache_bmask |= val; /* HACK */
298 break;
299 /* I/O Cache Buffer Window */
300 case 0x0060:
301 /* HACK */
302 if (s->cache_ltag == 0x80000001 && s->cache_bmask == 0xf0f0f0f) {
303 hwaddr dest = s->cache_ptag & ~0x1;
304 dest += (s->cache_maint & 0x3) << 3;
305 cpu_physical_memory_write(dest, &val, 4);
306 }
307 break;
308 /* Remote Speed Registers */
309 case 0x0070:
310 case 0x0078:
311 case 0x0080:
312 case 0x0088:
313 case 0x0090:
314 case 0x0098:
315 case 0x00a0:
316 case 0x00a8:
317 case 0x00b0:
318 case 0x00b8:
319 case 0x00c0:
320 case 0x00c8:
321 case 0x00d0:
322 case 0x00d8:
323 case 0x00e0:
324 case 0x00e8:
325 s->rem_speed[(addr - 0x0070) >> 3] = val;
326 break;
327 /* DMA channel base address */
328 case 0x0100:
329 case 0x0108:
330 case 0x0110:
331 case 0x0118:
332 case 0x0120:
333 case 0x0128:
334 case 0x0130:
335 case 0x0138:
336 case 0x0140:
337 case 0x0148:
338 case 0x0150:
339 case 0x0158:
340 case 0x0160:
341 case 0x0168:
342 case 0x0170:
343 case 0x0178:
344 case 0x0180:
345 case 0x0188:
346 case 0x0190:
347 case 0x0198:
348 case 0x01a0:
349 case 0x01a8:
350 case 0x01b0:
351 case 0x01b8:
352 case 0x01c0:
353 case 0x01c8:
354 case 0x01d0:
355 case 0x01d8:
356 case 0x01e0:
357 case 0x01e8:
358 case 0x01f0:
359 case 0x01f8:
360 {
361 int entry = (addr - 0x0100) >> 5;
362 int idx = (addr & 0x1f) >> 3;
363 s->dma_regs[entry][idx] = val;
364 }
365 break;
366 /* Memory refresh rate */
367 case 0x0210:
368 s->memory_refresh_rate = val;
369 break;
370 /* Interval timer reload */
371 case 0x0228:
372 s->itr = val & 0x01FF;
373 qemu_irq_lower(s->timer_irq);
374 set_next_tick(s);
375 break;
376 /* EISA interrupt */
377 case 0x0238:
378 break;
379 default:
380 qemu_log_mask(LOG_GUEST_ERROR,
381 "rc4030: invalid write of 0x%02x at 0x%x",
382 val, (int)addr);
383 break;
384 }
385 }
386
387 static const MemoryRegionOps rc4030_ops = {
388 .read = rc4030_read,
389 .write = rc4030_write,
390 .impl.min_access_size = 4,
391 .impl.max_access_size = 4,
392 .endianness = DEVICE_NATIVE_ENDIAN,
393 };
394
update_jazz_irq(rc4030State * s)395 static void update_jazz_irq(rc4030State *s)
396 {
397 uint16_t pending;
398
399 pending = s->isr_jazz & s->imr_jazz;
400
401 if (pending != 0) {
402 qemu_irq_raise(s->jazz_bus_irq);
403 } else {
404 qemu_irq_lower(s->jazz_bus_irq);
405 }
406 }
407
rc4030_irq_jazz_request(void * opaque,int irq,int level)408 static void rc4030_irq_jazz_request(void *opaque, int irq, int level)
409 {
410 rc4030State *s = opaque;
411
412 if (level) {
413 s->isr_jazz |= 1 << irq;
414 } else {
415 s->isr_jazz &= ~(1 << irq);
416 }
417
418 update_jazz_irq(s);
419 }
420
rc4030_periodic_timer(void * opaque)421 static void rc4030_periodic_timer(void *opaque)
422 {
423 rc4030State *s = opaque;
424
425 set_next_tick(s);
426 qemu_irq_raise(s->timer_irq);
427 }
428
jazzio_read(void * opaque,hwaddr addr,unsigned int size)429 static uint64_t jazzio_read(void *opaque, hwaddr addr, unsigned int size)
430 {
431 rc4030State *s = opaque;
432 uint32_t val;
433 uint32_t irq;
434 addr &= 0xfff;
435
436 switch (addr) {
437 /* Local bus int source */
438 case 0x00: {
439 uint32_t pending = s->isr_jazz & s->imr_jazz;
440 val = 0;
441 irq = 0;
442 while (pending) {
443 if (pending & 1) {
444 val = (irq + 1) << 2;
445 break;
446 }
447 irq++;
448 pending >>= 1;
449 }
450 break;
451 }
452 /* Local bus int enable mask */
453 case 0x02:
454 val = s->imr_jazz;
455 break;
456 default:
457 qemu_log_mask(LOG_GUEST_ERROR,
458 "rc4030/jazzio: invalid read at 0x%x", (int)addr);
459 val = 0;
460 break;
461 }
462
463 trace_jazzio_read(addr, val);
464
465 return val;
466 }
467
jazzio_write(void * opaque,hwaddr addr,uint64_t data,unsigned int size)468 static void jazzio_write(void *opaque, hwaddr addr, uint64_t data,
469 unsigned int size)
470 {
471 rc4030State *s = opaque;
472 uint32_t val = data;
473 addr &= 0xfff;
474
475 trace_jazzio_write(addr, val);
476
477 switch (addr) {
478 /* Local bus int enable mask */
479 case 0x02:
480 s->imr_jazz = val;
481 update_jazz_irq(s);
482 break;
483 default:
484 qemu_log_mask(LOG_GUEST_ERROR,
485 "rc4030/jazzio: invalid write of 0x%02x at 0x%x",
486 val, (int)addr);
487 break;
488 }
489 }
490
491 static const MemoryRegionOps jazzio_ops = {
492 .read = jazzio_read,
493 .write = jazzio_write,
494 .impl.min_access_size = 2,
495 .impl.max_access_size = 2,
496 .endianness = DEVICE_NATIVE_ENDIAN,
497 };
498
rc4030_dma_translate(IOMMUMemoryRegion * iommu,hwaddr addr,IOMMUAccessFlags flag,int iommu_idx)499 static IOMMUTLBEntry rc4030_dma_translate(IOMMUMemoryRegion *iommu, hwaddr addr,
500 IOMMUAccessFlags flag, int iommu_idx)
501 {
502 rc4030State *s = container_of(iommu, rc4030State, dma_mr);
503 IOMMUTLBEntry ret = {
504 .target_as = &address_space_memory,
505 .iova = addr & ~(DMA_PAGESIZE - 1),
506 .translated_addr = 0,
507 .addr_mask = DMA_PAGESIZE - 1,
508 .perm = IOMMU_NONE,
509 };
510 uint64_t i, entry_address;
511 dma_pagetable_entry entry;
512
513 i = addr / DMA_PAGESIZE;
514 if (i < s->dma_tl_limit / sizeof(entry)) {
515 entry_address = (s->dma_tl_base & 0x7fffffff) + i * sizeof(entry);
516 if (address_space_read(ret.target_as, entry_address,
517 MEMTXATTRS_UNSPECIFIED, &entry, sizeof(entry))
518 == MEMTX_OK) {
519 ret.translated_addr = entry.frame & ~(DMA_PAGESIZE - 1);
520 ret.perm = IOMMU_RW;
521 }
522 }
523
524 return ret;
525 }
526
rc4030_reset(DeviceState * dev)527 static void rc4030_reset(DeviceState *dev)
528 {
529 rc4030State *s = RC4030(dev);
530 int i;
531
532 s->config = 0x410; /* some boards seem to accept 0x104 too */
533 s->revision = 1;
534 s->invalid_address_register = 0;
535
536 memset(s->dma_regs, 0, sizeof(s->dma_regs));
537
538 s->remote_failed_address = s->memory_failed_address = 0;
539 s->cache_maint = 0;
540 s->cache_ptag = s->cache_ltag = 0;
541 s->cache_bmask = 0;
542
543 s->memory_refresh_rate = 0x18186;
544 s->nvram_protect = 7;
545 for (i = 0; i < 15; i++) {
546 s->rem_speed[i] = 7;
547 }
548 s->imr_jazz = 0x10; /* XXX: required by firmware, but why? */
549 s->isr_jazz = 0;
550
551 s->itr = 0;
552
553 qemu_irq_lower(s->timer_irq);
554 qemu_irq_lower(s->jazz_bus_irq);
555 }
556
rc4030_post_load(void * opaque,int version_id)557 static int rc4030_post_load(void *opaque, int version_id)
558 {
559 rc4030State *s = opaque;
560
561 set_next_tick(s);
562 update_jazz_irq(s);
563
564 return 0;
565 }
566
567 static const VMStateDescription vmstate_rc4030 = {
568 .name = "rc4030",
569 .version_id = 3,
570 .post_load = rc4030_post_load,
571 .fields = (const VMStateField []) {
572 VMSTATE_UINT32(config, rc4030State),
573 VMSTATE_UINT32(invalid_address_register, rc4030State),
574 VMSTATE_UINT32_2DARRAY(dma_regs, rc4030State, 8, 4),
575 VMSTATE_UINT32(dma_tl_base, rc4030State),
576 VMSTATE_UINT32(dma_tl_limit, rc4030State),
577 VMSTATE_UINT32(cache_maint, rc4030State),
578 VMSTATE_UINT32(remote_failed_address, rc4030State),
579 VMSTATE_UINT32(memory_failed_address, rc4030State),
580 VMSTATE_UINT32(cache_ptag, rc4030State),
581 VMSTATE_UINT32(cache_ltag, rc4030State),
582 VMSTATE_UINT32(cache_bmask, rc4030State),
583 VMSTATE_UINT32(memory_refresh_rate, rc4030State),
584 VMSTATE_UINT32(nvram_protect, rc4030State),
585 VMSTATE_UINT32_ARRAY(rem_speed, rc4030State, 16),
586 VMSTATE_UINT32(imr_jazz, rc4030State),
587 VMSTATE_UINT32(isr_jazz, rc4030State),
588 VMSTATE_UINT32(itr, rc4030State),
589 VMSTATE_END_OF_LIST()
590 }
591 };
592
rc4030_do_dma(void * opaque,int n,uint8_t * buf,int len,bool is_write)593 static void rc4030_do_dma(void *opaque, int n, uint8_t *buf,
594 int len, bool is_write)
595 {
596 rc4030State *s = opaque;
597 hwaddr dma_addr;
598 int dev_to_mem;
599
600 s->dma_regs[n][DMA_REG_ENABLE] &=
601 ~(DMA_FLAG_TC_INTR | DMA_FLAG_MEM_INTR | DMA_FLAG_ADDR_INTR);
602
603 /* Check DMA channel consistency */
604 dev_to_mem = (s->dma_regs[n][DMA_REG_ENABLE] & DMA_FLAG_MEM_TO_DEV) ? 0 : 1;
605 if (!(s->dma_regs[n][DMA_REG_ENABLE] & DMA_FLAG_ENABLE) ||
606 (is_write != dev_to_mem)) {
607 s->dma_regs[n][DMA_REG_ENABLE] |= DMA_FLAG_MEM_INTR;
608 s->nmi_interrupt |= 1 << n;
609 return;
610 }
611
612 /* Get start address and len */
613 if (len > s->dma_regs[n][DMA_REG_COUNT]) {
614 len = s->dma_regs[n][DMA_REG_COUNT];
615 }
616 dma_addr = s->dma_regs[n][DMA_REG_ADDRESS];
617
618 /* Read/write data at right place */
619 address_space_rw(&s->dma_as, dma_addr, MEMTXATTRS_UNSPECIFIED,
620 buf, len, is_write);
621
622 s->dma_regs[n][DMA_REG_ENABLE] |= DMA_FLAG_TC_INTR;
623 s->dma_regs[n][DMA_REG_COUNT] -= len;
624 }
625
626 struct rc4030DMAState {
627 void *opaque;
628 int n;
629 };
630
rc4030_dma_read(void * dma,uint8_t * buf,int len)631 void rc4030_dma_read(void *dma, uint8_t *buf, int len)
632 {
633 rc4030_dma s = dma;
634 rc4030_do_dma(s->opaque, s->n, buf, len, false);
635 }
636
rc4030_dma_write(void * dma,uint8_t * buf,int len)637 void rc4030_dma_write(void *dma, uint8_t *buf, int len)
638 {
639 rc4030_dma s = dma;
640 rc4030_do_dma(s->opaque, s->n, buf, len, true);
641 }
642
rc4030_allocate_dmas(void * opaque,int n)643 static rc4030_dma *rc4030_allocate_dmas(void *opaque, int n)
644 {
645 rc4030_dma *s;
646 struct rc4030DMAState *p;
647 int i;
648
649 s = g_new0(rc4030_dma, n);
650 p = g_new0(struct rc4030DMAState, n);
651 for (i = 0; i < n; i++) {
652 p->opaque = opaque;
653 p->n = i;
654 s[i] = p;
655 p++;
656 }
657 return s;
658 }
659
rc4030_initfn(Object * obj)660 static void rc4030_initfn(Object *obj)
661 {
662 DeviceState *dev = DEVICE(obj);
663 rc4030State *s = RC4030(obj);
664 SysBusDevice *sysbus = SYS_BUS_DEVICE(obj);
665
666 qdev_init_gpio_in(dev, rc4030_irq_jazz_request, 16);
667
668 sysbus_init_irq(sysbus, &s->timer_irq);
669 sysbus_init_irq(sysbus, &s->jazz_bus_irq);
670
671 sysbus_init_mmio(sysbus, &s->iomem_chipset);
672 sysbus_init_mmio(sysbus, &s->iomem_jazzio);
673 }
674
rc4030_realize(DeviceState * dev,Error ** errp)675 static void rc4030_realize(DeviceState *dev, Error **errp)
676 {
677 rc4030State *s = RC4030(dev);
678 Object *o = OBJECT(dev);
679
680 s->periodic_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL,
681 rc4030_periodic_timer, s);
682
683 memory_region_init_io(&s->iomem_chipset, o, &rc4030_ops, s,
684 "rc4030.chipset", 0x300);
685 memory_region_init_io(&s->iomem_jazzio, o, &jazzio_ops, s,
686 "rc4030.jazzio", 0x00001000);
687
688 memory_region_init_iommu(&s->dma_mr, sizeof(s->dma_mr),
689 TYPE_RC4030_IOMMU_MEMORY_REGION,
690 o, "rc4030.dma", 4 * GiB);
691 address_space_init(&s->dma_as, MEMORY_REGION(&s->dma_mr), "rc4030-dma");
692 }
693
rc4030_unrealize(DeviceState * dev)694 static void rc4030_unrealize(DeviceState *dev)
695 {
696 rc4030State *s = RC4030(dev);
697
698 timer_free(s->periodic_timer);
699
700 address_space_destroy(&s->dma_as);
701 object_unparent(OBJECT(&s->dma_mr));
702 }
703
rc4030_class_init(ObjectClass * klass,void * class_data)704 static void rc4030_class_init(ObjectClass *klass, void *class_data)
705 {
706 DeviceClass *dc = DEVICE_CLASS(klass);
707
708 dc->realize = rc4030_realize;
709 dc->unrealize = rc4030_unrealize;
710 dc->reset = rc4030_reset;
711 dc->vmsd = &vmstate_rc4030;
712 }
713
714 static const TypeInfo rc4030_info = {
715 .name = TYPE_RC4030,
716 .parent = TYPE_SYS_BUS_DEVICE,
717 .instance_size = sizeof(rc4030State),
718 .instance_init = rc4030_initfn,
719 .class_init = rc4030_class_init,
720 };
721
rc4030_iommu_memory_region_class_init(ObjectClass * klass,void * data)722 static void rc4030_iommu_memory_region_class_init(ObjectClass *klass,
723 void *data)
724 {
725 IOMMUMemoryRegionClass *imrc = IOMMU_MEMORY_REGION_CLASS(klass);
726
727 imrc->translate = rc4030_dma_translate;
728 }
729
730 static const TypeInfo rc4030_iommu_memory_region_info = {
731 .parent = TYPE_IOMMU_MEMORY_REGION,
732 .name = TYPE_RC4030_IOMMU_MEMORY_REGION,
733 .class_init = rc4030_iommu_memory_region_class_init,
734 };
735
rc4030_register_types(void)736 static void rc4030_register_types(void)
737 {
738 type_register_static(&rc4030_info);
739 type_register_static(&rc4030_iommu_memory_region_info);
740 }
741
type_init(rc4030_register_types)742 type_init(rc4030_register_types)
743
744 DeviceState *rc4030_init(rc4030_dma **dmas, IOMMUMemoryRegion **dma_mr)
745 {
746 DeviceState *dev;
747
748 dev = qdev_new(TYPE_RC4030);
749 sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
750
751 *dmas = rc4030_allocate_dmas(dev, 4);
752 *dma_mr = &RC4030(dev)->dma_mr;
753 return dev;
754 }
755