1 /* 2 * ARM PrimeCell PL330 DMA Controller 3 * 4 * Copyright (c) 2009 Samsung Electronics. 5 * Contributed by Kirill Batuzov <batuzovk@ispras.ru> 6 * Copyright (c) 2012 Peter A.G. Crosthwaite (peter.crosthwaite@petalogix.com) 7 * Copyright (c) 2012 PetaLogix Pty Ltd. 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License 11 * as published by the Free Software Foundation; version 2 or later. 12 * 13 * You should have received a copy of the GNU General Public License along 14 * with this program; if not, see <http://www.gnu.org/licenses/>. 15 */ 16 17 #include "qemu/osdep.h" 18 #include "qemu/cutils.h" 19 #include "hw/irq.h" 20 #include "hw/qdev-properties.h" 21 #include "hw/sysbus.h" 22 #include "migration/vmstate.h" 23 #include "qapi/error.h" 24 #include "qemu/timer.h" 25 #include "sysemu/dma.h" 26 #include "qemu/log.h" 27 #include "qemu/module.h" 28 #include "trace.h" 29 #include "qom/object.h" 30 31 #ifndef PL330_ERR_DEBUG 32 #define PL330_ERR_DEBUG 0 33 #endif 34 35 #define PL330_PERIPH_NUM 32 36 #define PL330_MAX_BURST_LEN 128 37 #define PL330_INSN_MAXSIZE 6 38 39 #define PL330_FIFO_OK 0 40 #define PL330_FIFO_STALL 1 41 #define PL330_FIFO_ERR (-1) 42 43 #define PL330_FAULT_UNDEF_INSTR (1 << 0) 44 #define PL330_FAULT_OPERAND_INVALID (1 << 1) 45 #define PL330_FAULT_DMAGO_ERR (1 << 4) 46 #define PL330_FAULT_EVENT_ERR (1 << 5) 47 #define PL330_FAULT_CH_PERIPH_ERR (1 << 6) 48 #define PL330_FAULT_CH_RDWR_ERR (1 << 7) 49 #define PL330_FAULT_ST_DATA_UNAVAILABLE (1 << 12) 50 #define PL330_FAULT_FIFOEMPTY_ERR (1 << 13) 51 #define PL330_FAULT_INSTR_FETCH_ERR (1 << 16) 52 #define PL330_FAULT_DATA_WRITE_ERR (1 << 17) 53 #define PL330_FAULT_DATA_READ_ERR (1 << 18) 54 #define PL330_FAULT_DBG_INSTR (1 << 30) 55 #define PL330_FAULT_LOCKUP_ERR (1 << 31) 56 57 #define PL330_UNTAGGED 0xff 58 59 #define PL330_SINGLE 0x0 60 #define PL330_BURST 0x1 61 62 #define PL330_WATCHDOG_LIMIT 1024 63 64 /* IOMEM mapped registers */ 65 #define PL330_REG_DSR 0x000 66 #define PL330_REG_DPC 0x004 67 #define PL330_REG_INTEN 0x020 68 #define PL330_REG_INT_EVENT_RIS 0x024 69 #define PL330_REG_INTMIS 0x028 70 #define PL330_REG_INTCLR 0x02C 71 #define PL330_REG_FSRD 0x030 72 #define PL330_REG_FSRC 0x034 73 #define PL330_REG_FTRD 0x038 74 #define PL330_REG_FTR_BASE 0x040 75 #define PL330_REG_CSR_BASE 0x100 76 #define PL330_REG_CPC_BASE 0x104 77 #define PL330_REG_CHANCTRL 0x400 78 #define PL330_REG_DBGSTATUS 0xD00 79 #define PL330_REG_DBGCMD 0xD04 80 #define PL330_REG_DBGINST0 0xD08 81 #define PL330_REG_DBGINST1 0xD0C 82 #define PL330_REG_CR0_BASE 0xE00 83 #define PL330_REG_PERIPH_ID 0xFE0 84 85 #define PL330_IOMEM_SIZE 0x1000 86 87 #define CFG_BOOT_ADDR 2 88 #define CFG_INS 3 89 #define CFG_PNS 4 90 #define CFG_CRD 5 91 92 static const uint32_t pl330_id[] = { 93 0x30, 0x13, 0x24, 0x00, 0x0D, 0xF0, 0x05, 0xB1 94 }; 95 96 /* DMA channel states as they are described in PL330 Technical Reference Manual 97 * Most of them will not be used in emulation. 98 */ 99 typedef enum { 100 pl330_chan_stopped = 0, 101 pl330_chan_executing = 1, 102 pl330_chan_cache_miss = 2, 103 pl330_chan_updating_pc = 3, 104 pl330_chan_waiting_event = 4, 105 pl330_chan_at_barrier = 5, 106 pl330_chan_queue_busy = 6, 107 pl330_chan_waiting_periph = 7, 108 pl330_chan_killing = 8, 109 pl330_chan_completing = 9, 110 pl330_chan_fault_completing = 14, 111 pl330_chan_fault = 15, 112 } PL330ChanState; 113 114 typedef struct PL330State PL330State; 115 116 typedef struct PL330Chan { 117 uint32_t src; 118 uint32_t dst; 119 uint32_t pc; 120 uint32_t control; 121 uint32_t status; 122 uint32_t lc[2]; 123 uint32_t fault_type; 124 uint32_t watchdog_timer; 125 126 bool ns; 127 uint8_t request_flag; 128 uint8_t wakeup; 129 uint8_t wfp_sbp; 130 131 uint8_t state; 132 uint8_t stall; 133 134 bool is_manager; 135 PL330State *parent; 136 uint8_t tag; 137 } PL330Chan; 138 139 static const VMStateDescription vmstate_pl330_chan = { 140 .name = "pl330_chan", 141 .version_id = 1, 142 .minimum_version_id = 1, 143 .fields = (const VMStateField[]) { 144 VMSTATE_UINT32(src, PL330Chan), 145 VMSTATE_UINT32(dst, PL330Chan), 146 VMSTATE_UINT32(pc, PL330Chan), 147 VMSTATE_UINT32(control, PL330Chan), 148 VMSTATE_UINT32(status, PL330Chan), 149 VMSTATE_UINT32_ARRAY(lc, PL330Chan, 2), 150 VMSTATE_UINT32(fault_type, PL330Chan), 151 VMSTATE_UINT32(watchdog_timer, PL330Chan), 152 VMSTATE_BOOL(ns, PL330Chan), 153 VMSTATE_UINT8(request_flag, PL330Chan), 154 VMSTATE_UINT8(wakeup, PL330Chan), 155 VMSTATE_UINT8(wfp_sbp, PL330Chan), 156 VMSTATE_UINT8(state, PL330Chan), 157 VMSTATE_UINT8(stall, PL330Chan), 158 VMSTATE_END_OF_LIST() 159 } 160 }; 161 162 typedef struct PL330Fifo { 163 uint8_t *buf; 164 uint8_t *tag; 165 uint32_t head; 166 uint32_t num; 167 uint32_t buf_size; 168 } PL330Fifo; 169 170 static const VMStateDescription vmstate_pl330_fifo = { 171 .name = "pl330_chan", 172 .version_id = 1, 173 .minimum_version_id = 1, 174 .fields = (const VMStateField[]) { 175 VMSTATE_VBUFFER_UINT32(buf, PL330Fifo, 1, NULL, buf_size), 176 VMSTATE_VBUFFER_UINT32(tag, PL330Fifo, 1, NULL, buf_size), 177 VMSTATE_UINT32(head, PL330Fifo), 178 VMSTATE_UINT32(num, PL330Fifo), 179 VMSTATE_UINT32(buf_size, PL330Fifo), 180 VMSTATE_END_OF_LIST() 181 } 182 }; 183 184 typedef struct PL330QueueEntry { 185 uint32_t addr; 186 uint32_t len; 187 uint8_t n; 188 bool inc; 189 bool z; 190 uint8_t tag; 191 uint8_t seqn; 192 } PL330QueueEntry; 193 194 static const VMStateDescription vmstate_pl330_queue_entry = { 195 .name = "pl330_queue_entry", 196 .version_id = 1, 197 .minimum_version_id = 1, 198 .fields = (const VMStateField[]) { 199 VMSTATE_UINT32(addr, PL330QueueEntry), 200 VMSTATE_UINT32(len, PL330QueueEntry), 201 VMSTATE_UINT8(n, PL330QueueEntry), 202 VMSTATE_BOOL(inc, PL330QueueEntry), 203 VMSTATE_BOOL(z, PL330QueueEntry), 204 VMSTATE_UINT8(tag, PL330QueueEntry), 205 VMSTATE_UINT8(seqn, PL330QueueEntry), 206 VMSTATE_END_OF_LIST() 207 } 208 }; 209 210 typedef struct PL330Queue { 211 PL330State *parent; 212 PL330QueueEntry *queue; 213 uint32_t queue_size; 214 } PL330Queue; 215 216 static const VMStateDescription vmstate_pl330_queue = { 217 .name = "pl330_queue", 218 .version_id = 2, 219 .minimum_version_id = 2, 220 .fields = (const VMStateField[]) { 221 VMSTATE_STRUCT_VARRAY_POINTER_UINT32(queue, PL330Queue, queue_size, 222 vmstate_pl330_queue_entry, 223 PL330QueueEntry), 224 VMSTATE_END_OF_LIST() 225 } 226 }; 227 228 struct PL330State { 229 SysBusDevice parent_obj; 230 231 MemoryRegion iomem; 232 qemu_irq irq_abort; 233 qemu_irq *irq; 234 235 /* Config registers. cfg[5] = CfgDn. */ 236 uint32_t cfg[6]; 237 #define EVENT_SEC_STATE 3 238 #define PERIPH_SEC_STATE 4 239 /* cfg 0 bits and pieces */ 240 uint32_t num_chnls; 241 uint8_t num_periph_req; 242 uint8_t num_events; 243 uint8_t mgr_ns_at_rst; 244 /* cfg 1 bits and pieces */ 245 uint8_t i_cache_len; 246 uint8_t num_i_cache_lines; 247 /* CRD bits and pieces */ 248 uint8_t data_width; 249 uint8_t wr_cap; 250 uint8_t wr_q_dep; 251 uint8_t rd_cap; 252 uint8_t rd_q_dep; 253 uint16_t data_buffer_dep; 254 255 PL330Chan manager; 256 PL330Chan *chan; 257 PL330Fifo fifo; 258 PL330Queue read_queue; 259 PL330Queue write_queue; 260 uint8_t *lo_seqn; 261 uint8_t *hi_seqn; 262 QEMUTimer *timer; /* is used for restore dma. */ 263 264 uint32_t inten; 265 uint32_t int_status; 266 uint32_t ev_status; 267 uint32_t dbg[2]; 268 uint8_t debug_status; 269 uint8_t num_faulting; 270 uint8_t periph_busy[PL330_PERIPH_NUM]; 271 272 /* Memory region that DMA operation access */ 273 MemoryRegion *mem_mr; 274 AddressSpace *mem_as; 275 }; 276 277 #define TYPE_PL330 "pl330" 278 OBJECT_DECLARE_SIMPLE_TYPE(PL330State, PL330) 279 280 static const VMStateDescription vmstate_pl330 = { 281 .name = "pl330", 282 .version_id = 2, 283 .minimum_version_id = 2, 284 .fields = (const VMStateField[]) { 285 VMSTATE_STRUCT(manager, PL330State, 0, vmstate_pl330_chan, PL330Chan), 286 VMSTATE_STRUCT_VARRAY_POINTER_UINT32(chan, PL330State, num_chnls, 287 vmstate_pl330_chan, PL330Chan), 288 VMSTATE_VBUFFER_UINT32(lo_seqn, PL330State, 1, NULL, num_chnls), 289 VMSTATE_VBUFFER_UINT32(hi_seqn, PL330State, 1, NULL, num_chnls), 290 VMSTATE_STRUCT(fifo, PL330State, 0, vmstate_pl330_fifo, PL330Fifo), 291 VMSTATE_STRUCT(read_queue, PL330State, 0, vmstate_pl330_queue, 292 PL330Queue), 293 VMSTATE_STRUCT(write_queue, PL330State, 0, vmstate_pl330_queue, 294 PL330Queue), 295 VMSTATE_TIMER_PTR(timer, PL330State), 296 VMSTATE_UINT32(inten, PL330State), 297 VMSTATE_UINT32(int_status, PL330State), 298 VMSTATE_UINT32(ev_status, PL330State), 299 VMSTATE_UINT32_ARRAY(dbg, PL330State, 2), 300 VMSTATE_UINT8(debug_status, PL330State), 301 VMSTATE_UINT8(num_faulting, PL330State), 302 VMSTATE_UINT8_ARRAY(periph_busy, PL330State, PL330_PERIPH_NUM), 303 VMSTATE_END_OF_LIST() 304 } 305 }; 306 307 typedef struct PL330InsnDesc { 308 /* OPCODE of the instruction */ 309 uint8_t opcode; 310 /* Mask so we can select several sibling instructions, such as 311 DMALD, DMALDS and DMALDB */ 312 uint8_t opmask; 313 /* Size of instruction in bytes */ 314 uint8_t size; 315 /* Interpreter */ 316 void (*exec)(PL330Chan *, uint8_t opcode, uint8_t *args, int len); 317 } PL330InsnDesc; 318 319 static void pl330_hexdump(uint8_t *buf, size_t size) 320 { 321 g_autoptr(GString) str = g_string_sized_new(64); 322 size_t b, len; 323 324 for (b = 0; b < size; b += len) { 325 len = MIN(16, size - b); 326 g_string_truncate(str, 0); 327 qemu_hexdump_line(str, buf + b, len, 1, 4); 328 trace_pl330_hexdump(b, str->str); 329 } 330 } 331 332 /* MFIFO Implementation 333 * 334 * MFIFO is implemented as a cyclic buffer of BUF_SIZE size. Tagged bytes are 335 * stored in this buffer. Data is stored in BUF field, tags - in the 336 * corresponding array elements of TAG field. 337 */ 338 339 /* Initialize queue. */ 340 341 static void pl330_fifo_init(PL330Fifo *s, uint32_t size) 342 { 343 s->buf = g_malloc0(size); 344 s->tag = g_malloc0(size); 345 s->buf_size = size; 346 } 347 348 /* Cyclic increment */ 349 350 static inline int pl330_fifo_inc(PL330Fifo *s, int x) 351 { 352 return (x + 1) % s->buf_size; 353 } 354 355 /* Number of empty bytes in MFIFO */ 356 357 static inline int pl330_fifo_num_free(PL330Fifo *s) 358 { 359 return s->buf_size - s->num; 360 } 361 362 /* Push LEN bytes of data stored in BUF to MFIFO and tag it with TAG. 363 * Zero returned on success, PL330_FIFO_STALL if there is no enough free 364 * space in MFIFO to store requested amount of data. If push was unsuccessful 365 * no data is stored to MFIFO. 366 */ 367 368 static int pl330_fifo_push(PL330Fifo *s, uint8_t *buf, int len, uint8_t tag) 369 { 370 int i; 371 372 if (s->buf_size - s->num < len) { 373 return PL330_FIFO_STALL; 374 } 375 for (i = 0; i < len; i++) { 376 int push_idx = (s->head + s->num + i) % s->buf_size; 377 s->buf[push_idx] = buf[i]; 378 s->tag[push_idx] = tag; 379 } 380 s->num += len; 381 return PL330_FIFO_OK; 382 } 383 384 /* Get LEN bytes of data from MFIFO and store it to BUF. Tag value of each 385 * byte is verified. Zero returned on success, PL330_FIFO_ERR on tag mismatch 386 * and PL330_FIFO_STALL if there is no enough data in MFIFO. If get was 387 * unsuccessful no data is removed from MFIFO. 388 */ 389 390 static int pl330_fifo_get(PL330Fifo *s, uint8_t *buf, int len, uint8_t tag) 391 { 392 int i; 393 394 if (s->num < len) { 395 return PL330_FIFO_STALL; 396 } 397 for (i = 0; i < len; i++) { 398 if (s->tag[s->head] == tag) { 399 int get_idx = (s->head + i) % s->buf_size; 400 buf[i] = s->buf[get_idx]; 401 } else { /* Tag mismatch - Rollback transaction */ 402 return PL330_FIFO_ERR; 403 } 404 } 405 s->head = (s->head + len) % s->buf_size; 406 s->num -= len; 407 return PL330_FIFO_OK; 408 } 409 410 /* Reset MFIFO. This completely erases all data in it. */ 411 412 static inline void pl330_fifo_reset(PL330Fifo *s) 413 { 414 s->head = 0; 415 s->num = 0; 416 } 417 418 /* Return tag of the first byte stored in MFIFO. If MFIFO is empty 419 * PL330_UNTAGGED is returned. 420 */ 421 422 static inline uint8_t pl330_fifo_tag(PL330Fifo *s) 423 { 424 return (!s->num) ? PL330_UNTAGGED : s->tag[s->head]; 425 } 426 427 /* Returns non-zero if tag TAG is present in fifo or zero otherwise */ 428 429 static int pl330_fifo_has_tag(PL330Fifo *s, uint8_t tag) 430 { 431 int i, n; 432 433 i = s->head; 434 for (n = 0; n < s->num; n++) { 435 if (s->tag[i] == tag) { 436 return 1; 437 } 438 i = pl330_fifo_inc(s, i); 439 } 440 return 0; 441 } 442 443 /* Remove all entry tagged with TAG from MFIFO */ 444 445 static void pl330_fifo_tagged_remove(PL330Fifo *s, uint8_t tag) 446 { 447 int i, t, n; 448 449 t = i = s->head; 450 for (n = 0; n < s->num; n++) { 451 if (s->tag[i] != tag) { 452 s->buf[t] = s->buf[i]; 453 s->tag[t] = s->tag[i]; 454 t = pl330_fifo_inc(s, t); 455 } else { 456 s->num = s->num - 1; 457 } 458 i = pl330_fifo_inc(s, i); 459 } 460 } 461 462 /* Read-Write Queue implementation 463 * 464 * A Read-Write Queue stores up to QUEUE_SIZE instructions (loads or stores). 465 * Each instruction is described by source (for loads) or destination (for 466 * stores) address ADDR, width of data to be loaded/stored LEN, number of 467 * stores/loads to be performed N, INC bit, Z bit and TAG to identify channel 468 * this instruction belongs to. Queue does not store any information about 469 * nature of the instruction: is it load or store. PL330 has different queues 470 * for loads and stores so this is already known at the top level where it 471 * matters. 472 * 473 * Queue works as FIFO for instructions with equivalent tags, but can issue 474 * instructions with different tags in arbitrary order. SEQN field attached to 475 * each instruction helps to achieve this. For each TAG queue contains 476 * instructions with consecutive SEQN values ranging from LO_SEQN[TAG] to 477 * HI_SEQN[TAG]-1 inclusive. SEQN is 8-bit unsigned integer, so SEQN=255 is 478 * followed by SEQN=0. 479 * 480 * Z bit indicates that zeroes should be stored. No MFIFO fetches are performed 481 * in this case. 482 */ 483 484 static void pl330_queue_reset(PL330Queue *s) 485 { 486 int i; 487 488 for (i = 0; i < s->queue_size; i++) { 489 s->queue[i].tag = PL330_UNTAGGED; 490 } 491 } 492 493 /* Initialize queue */ 494 static void pl330_queue_init(PL330Queue *s, int size, PL330State *parent) 495 { 496 s->parent = parent; 497 s->queue = g_new0(PL330QueueEntry, size); 498 s->queue_size = size; 499 } 500 501 /* Returns pointer to an empty slot or NULL if queue is full */ 502 static PL330QueueEntry *pl330_queue_find_empty(PL330Queue *s) 503 { 504 int i; 505 506 for (i = 0; i < s->queue_size; i++) { 507 if (s->queue[i].tag == PL330_UNTAGGED) { 508 return &s->queue[i]; 509 } 510 } 511 return NULL; 512 } 513 514 /* Put instruction in queue. 515 * Return value: 516 * - zero - OK 517 * - non-zero - queue is full 518 */ 519 520 static int pl330_queue_put_insn(PL330Queue *s, uint32_t addr, 521 int len, int n, bool inc, bool z, uint8_t tag) 522 { 523 PL330QueueEntry *entry = pl330_queue_find_empty(s); 524 525 if (!entry) { 526 return 1; 527 } 528 entry->tag = tag; 529 entry->addr = addr; 530 entry->len = len; 531 entry->n = n; 532 entry->z = z; 533 entry->inc = inc; 534 entry->seqn = s->parent->hi_seqn[tag]; 535 s->parent->hi_seqn[tag]++; 536 return 0; 537 } 538 539 /* Returns a pointer to queue slot containing instruction which satisfies 540 * following conditions: 541 * - it has valid tag value (not PL330_UNTAGGED) 542 * - if enforce_seq is set it has to be issuable without violating queue 543 * logic (see above) 544 * - if TAG argument is not PL330_UNTAGGED this instruction has tag value 545 * equivalent to the argument TAG value. 546 * If such instruction cannot be found NULL is returned. 547 */ 548 549 static PL330QueueEntry *pl330_queue_find_insn(PL330Queue *s, uint8_t tag, 550 bool enforce_seq) 551 { 552 int i; 553 554 for (i = 0; i < s->queue_size; i++) { 555 if (s->queue[i].tag != PL330_UNTAGGED) { 556 if ((!enforce_seq || 557 s->queue[i].seqn == s->parent->lo_seqn[s->queue[i].tag]) && 558 (s->queue[i].tag == tag || tag == PL330_UNTAGGED || 559 s->queue[i].z)) { 560 return &s->queue[i]; 561 } 562 } 563 } 564 return NULL; 565 } 566 567 /* Removes instruction from queue. */ 568 569 static inline void pl330_queue_remove_insn(PL330Queue *s, PL330QueueEntry *e) 570 { 571 s->parent->lo_seqn[e->tag]++; 572 e->tag = PL330_UNTAGGED; 573 } 574 575 /* Removes all instructions tagged with TAG from queue. */ 576 577 static inline void pl330_queue_remove_tagged(PL330Queue *s, uint8_t tag) 578 { 579 int i; 580 581 for (i = 0; i < s->queue_size; i++) { 582 if (s->queue[i].tag == tag) { 583 s->queue[i].tag = PL330_UNTAGGED; 584 } 585 } 586 } 587 588 /* DMA instruction execution engine */ 589 590 /* Moves DMA channel to the FAULT state and updates it's status. */ 591 592 static inline void pl330_fault(PL330Chan *ch, uint32_t flags) 593 { 594 trace_pl330_fault(ch, flags); 595 ch->fault_type |= flags; 596 if (ch->state == pl330_chan_fault) { 597 return; 598 } 599 ch->state = pl330_chan_fault; 600 ch->parent->num_faulting++; 601 if (ch->parent->num_faulting == 1) { 602 trace_pl330_fault_abort(); 603 qemu_irq_raise(ch->parent->irq_abort); 604 } 605 } 606 607 /* 608 * For information about instructions see PL330 Technical Reference Manual. 609 * 610 * Arguments: 611 * CH - channel executing the instruction 612 * OPCODE - opcode 613 * ARGS - array of 8-bit arguments 614 * LEN - number of elements in ARGS array 615 */ 616 617 static void pl330_dmaadxh(PL330Chan *ch, uint8_t *args, bool ra, bool neg) 618 { 619 uint32_t im = (args[1] << 8) | args[0]; 620 if (neg) { 621 im |= 0xffffu << 16; 622 } 623 624 if (ch->is_manager) { 625 pl330_fault(ch, PL330_FAULT_UNDEF_INSTR); 626 return; 627 } 628 if (ra) { 629 ch->dst += im; 630 } else { 631 ch->src += im; 632 } 633 } 634 635 static void pl330_dmaaddh(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 636 { 637 pl330_dmaadxh(ch, args, extract32(opcode, 1, 1), false); 638 } 639 640 static void pl330_dmaadnh(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 641 { 642 pl330_dmaadxh(ch, args, extract32(opcode, 1, 1), true); 643 } 644 645 static void pl330_dmaend(PL330Chan *ch, uint8_t opcode, 646 uint8_t *args, int len) 647 { 648 PL330State *s = ch->parent; 649 650 if (ch->state == pl330_chan_executing && !ch->is_manager) { 651 /* Wait for all transfers to complete */ 652 if (pl330_fifo_has_tag(&s->fifo, ch->tag) || 653 pl330_queue_find_insn(&s->read_queue, ch->tag, false) != NULL || 654 pl330_queue_find_insn(&s->write_queue, ch->tag, false) != NULL) { 655 656 ch->stall = 1; 657 return; 658 } 659 } 660 trace_pl330_dmaend(); 661 pl330_fifo_tagged_remove(&s->fifo, ch->tag); 662 pl330_queue_remove_tagged(&s->read_queue, ch->tag); 663 pl330_queue_remove_tagged(&s->write_queue, ch->tag); 664 ch->state = pl330_chan_stopped; 665 } 666 667 static void pl330_dmaflushp(PL330Chan *ch, uint8_t opcode, 668 uint8_t *args, int len) 669 { 670 uint8_t periph_id; 671 672 if (args[0] & 7) { 673 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 674 return; 675 } 676 periph_id = (args[0] >> 3) & 0x1f; 677 if (periph_id >= ch->parent->num_periph_req) { 678 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 679 return; 680 } 681 if (ch->ns && !(ch->parent->cfg[CFG_PNS] & (1 << periph_id))) { 682 pl330_fault(ch, PL330_FAULT_CH_PERIPH_ERR); 683 return; 684 } 685 /* Do nothing */ 686 } 687 688 static void pl330_dmago(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 689 { 690 uint8_t chan_id; 691 uint8_t ns; 692 uint32_t pc; 693 PL330Chan *s; 694 695 trace_pl330_dmago(); 696 697 if (!ch->is_manager) { 698 pl330_fault(ch, PL330_FAULT_UNDEF_INSTR); 699 return; 700 } 701 ns = !!(opcode & 2); 702 chan_id = args[0] & 7; 703 if ((args[0] >> 3)) { 704 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 705 return; 706 } 707 if (chan_id >= ch->parent->num_chnls) { 708 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 709 return; 710 } 711 pc = (((uint32_t)args[4]) << 24) | (((uint32_t)args[3]) << 16) | 712 (((uint32_t)args[2]) << 8) | (((uint32_t)args[1])); 713 if (ch->parent->chan[chan_id].state != pl330_chan_stopped) { 714 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 715 return; 716 } 717 if (ch->ns && !ns) { 718 pl330_fault(ch, PL330_FAULT_DMAGO_ERR); 719 return; 720 } 721 s = &ch->parent->chan[chan_id]; 722 s->ns = ns; 723 s->pc = pc; 724 s->state = pl330_chan_executing; 725 } 726 727 static void pl330_dmald(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 728 { 729 uint8_t bs = opcode & 3; 730 uint32_t size, num; 731 bool inc; 732 733 if (bs == 2) { 734 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 735 return; 736 } 737 if ((bs == 1 && ch->request_flag == PL330_BURST) || 738 (bs == 3 && ch->request_flag == PL330_SINGLE)) { 739 /* Perform NOP */ 740 return; 741 } 742 if (bs == 1 && ch->request_flag == PL330_SINGLE) { 743 num = 1; 744 } else { 745 num = ((ch->control >> 4) & 0xf) + 1; 746 } 747 size = (uint32_t)1 << ((ch->control >> 1) & 0x7); 748 inc = !!(ch->control & 1); 749 ch->stall = pl330_queue_put_insn(&ch->parent->read_queue, ch->src, 750 size, num, inc, 0, ch->tag); 751 if (!ch->stall) { 752 trace_pl330_dmald(ch->tag, ch->src, size, num, inc ? 'Y' : 'N'); 753 ch->src += inc ? size * num - (ch->src & (size - 1)) : 0; 754 } 755 } 756 757 static void pl330_dmaldp(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 758 { 759 uint8_t periph_id; 760 761 if (args[0] & 7) { 762 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 763 return; 764 } 765 periph_id = (args[0] >> 3) & 0x1f; 766 if (periph_id >= ch->parent->num_periph_req) { 767 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 768 return; 769 } 770 if (ch->ns && !(ch->parent->cfg[CFG_PNS] & (1 << periph_id))) { 771 pl330_fault(ch, PL330_FAULT_CH_PERIPH_ERR); 772 return; 773 } 774 pl330_dmald(ch, opcode, args, len); 775 } 776 777 static void pl330_dmalp(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 778 { 779 uint8_t lc = (opcode & 2) >> 1; 780 781 ch->lc[lc] = args[0]; 782 } 783 784 static void pl330_dmakill(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 785 { 786 if (ch->state == pl330_chan_fault || 787 ch->state == pl330_chan_fault_completing) { 788 /* This is the only way for a channel to leave the faulting state */ 789 ch->fault_type = 0; 790 ch->parent->num_faulting--; 791 if (ch->parent->num_faulting == 0) { 792 trace_pl330_dmakill(); 793 qemu_irq_lower(ch->parent->irq_abort); 794 } 795 } 796 ch->state = pl330_chan_killing; 797 pl330_fifo_tagged_remove(&ch->parent->fifo, ch->tag); 798 pl330_queue_remove_tagged(&ch->parent->read_queue, ch->tag); 799 pl330_queue_remove_tagged(&ch->parent->write_queue, ch->tag); 800 ch->state = pl330_chan_stopped; 801 } 802 803 static void pl330_dmalpend(PL330Chan *ch, uint8_t opcode, 804 uint8_t *args, int len) 805 { 806 uint8_t nf = (opcode & 0x10) >> 4; 807 uint8_t bs = opcode & 3; 808 uint8_t lc = (opcode & 4) >> 2; 809 810 trace_pl330_dmalpend(nf, bs, lc, ch->lc[lc], ch->request_flag); 811 812 if (bs == 2) { 813 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 814 return; 815 } 816 if ((bs == 1 && ch->request_flag == PL330_BURST) || 817 (bs == 3 && ch->request_flag == PL330_SINGLE)) { 818 /* Perform NOP */ 819 return; 820 } 821 if (!nf || ch->lc[lc]) { 822 if (nf) { 823 ch->lc[lc]--; 824 } 825 trace_pl330_dmalpiter(); 826 ch->pc -= args[0]; 827 ch->pc -= len + 1; 828 /* "ch->pc -= args[0] + len + 1" is incorrect when args[0] == 256 */ 829 } else { 830 trace_pl330_dmalpfallthrough(); 831 } 832 } 833 834 835 static void pl330_dmamov(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 836 { 837 uint8_t rd = args[0] & 7; 838 uint32_t im; 839 840 if ((args[0] >> 3)) { 841 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 842 return; 843 } 844 im = (((uint32_t)args[4]) << 24) | (((uint32_t)args[3]) << 16) | 845 (((uint32_t)args[2]) << 8) | (((uint32_t)args[1])); 846 switch (rd) { 847 case 0: 848 ch->src = im; 849 break; 850 case 1: 851 ch->control = im; 852 break; 853 case 2: 854 ch->dst = im; 855 break; 856 default: 857 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 858 return; 859 } 860 } 861 862 static void pl330_dmanop(PL330Chan *ch, uint8_t opcode, 863 uint8_t *args, int len) 864 { 865 /* NOP is NOP. */ 866 } 867 868 static void pl330_dmarmb(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 869 { 870 if (pl330_queue_find_insn(&ch->parent->read_queue, ch->tag, false)) { 871 ch->state = pl330_chan_at_barrier; 872 ch->stall = 1; 873 return; 874 } else { 875 ch->state = pl330_chan_executing; 876 } 877 } 878 879 static void pl330_dmasev(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 880 { 881 uint8_t ev_id; 882 883 if (args[0] & 7) { 884 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 885 return; 886 } 887 ev_id = (args[0] >> 3) & 0x1f; 888 if (ev_id >= ch->parent->num_events) { 889 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 890 return; 891 } 892 if (ch->ns && !(ch->parent->cfg[CFG_INS] & (1 << ev_id))) { 893 pl330_fault(ch, PL330_FAULT_EVENT_ERR); 894 return; 895 } 896 if (ch->parent->inten & (1 << ev_id)) { 897 ch->parent->int_status |= (1 << ev_id); 898 trace_pl330_dmasev_evirq(ev_id); 899 qemu_irq_raise(ch->parent->irq[ev_id]); 900 } 901 trace_pl330_dmasev_event(ev_id); 902 ch->parent->ev_status |= (1 << ev_id); 903 } 904 905 static void pl330_dmast(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 906 { 907 uint8_t bs = opcode & 3; 908 uint32_t size, num; 909 bool inc; 910 911 if (bs == 2) { 912 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 913 return; 914 } 915 if ((bs == 1 && ch->request_flag == PL330_BURST) || 916 (bs == 3 && ch->request_flag == PL330_SINGLE)) { 917 /* Perform NOP */ 918 return; 919 } 920 num = ((ch->control >> 18) & 0xf) + 1; 921 size = (uint32_t)1 << ((ch->control >> 15) & 0x7); 922 inc = !!((ch->control >> 14) & 1); 923 ch->stall = pl330_queue_put_insn(&ch->parent->write_queue, ch->dst, 924 size, num, inc, 0, ch->tag); 925 if (!ch->stall) { 926 trace_pl330_dmast(ch->tag, ch->dst, size, num, inc ? 'Y' : 'N'); 927 ch->dst += inc ? size * num - (ch->dst & (size - 1)) : 0; 928 } 929 } 930 931 static void pl330_dmastp(PL330Chan *ch, uint8_t opcode, 932 uint8_t *args, int len) 933 { 934 uint8_t periph_id; 935 936 if (args[0] & 7) { 937 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 938 return; 939 } 940 periph_id = (args[0] >> 3) & 0x1f; 941 if (periph_id >= ch->parent->num_periph_req) { 942 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 943 return; 944 } 945 if (ch->ns && !(ch->parent->cfg[CFG_PNS] & (1 << periph_id))) { 946 pl330_fault(ch, PL330_FAULT_CH_PERIPH_ERR); 947 return; 948 } 949 pl330_dmast(ch, opcode, args, len); 950 } 951 952 static void pl330_dmastz(PL330Chan *ch, uint8_t opcode, 953 uint8_t *args, int len) 954 { 955 uint32_t size, num; 956 bool inc; 957 958 num = ((ch->control >> 18) & 0xf) + 1; 959 size = (uint32_t)1 << ((ch->control >> 15) & 0x7); 960 inc = !!((ch->control >> 14) & 1); 961 ch->stall = pl330_queue_put_insn(&ch->parent->write_queue, ch->dst, 962 size, num, inc, 1, ch->tag); 963 if (inc) { 964 ch->dst += size * num; 965 } 966 } 967 968 static void pl330_dmawfe(PL330Chan *ch, uint8_t opcode, 969 uint8_t *args, int len) 970 { 971 uint8_t ev_id; 972 int i; 973 974 if (args[0] & 5) { 975 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 976 return; 977 } 978 ev_id = (args[0] >> 3) & 0x1f; 979 if (ev_id >= ch->parent->num_events) { 980 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 981 return; 982 } 983 if (ch->ns && !(ch->parent->cfg[CFG_INS] & (1 << ev_id))) { 984 pl330_fault(ch, PL330_FAULT_EVENT_ERR); 985 return; 986 } 987 ch->wakeup = ev_id; 988 ch->state = pl330_chan_waiting_event; 989 if (~ch->parent->inten & ch->parent->ev_status & 1 << ev_id) { 990 ch->state = pl330_chan_executing; 991 /* If anyone else is currently waiting on the same event, let them 992 * clear the ev_status so they pick up event as well 993 */ 994 for (i = 0; i < ch->parent->num_chnls; ++i) { 995 PL330Chan *peer = &ch->parent->chan[i]; 996 if (peer->state == pl330_chan_waiting_event && 997 peer->wakeup == ev_id) { 998 return; 999 } 1000 } 1001 ch->parent->ev_status &= ~(1 << ev_id); 1002 trace_pl330_dmawfe(ev_id); 1003 } else { 1004 ch->stall = 1; 1005 } 1006 } 1007 1008 static void pl330_dmawfp(PL330Chan *ch, uint8_t opcode, 1009 uint8_t *args, int len) 1010 { 1011 uint8_t bs = opcode & 3; 1012 uint8_t periph_id; 1013 1014 if (args[0] & 7) { 1015 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 1016 return; 1017 } 1018 periph_id = (args[0] >> 3) & 0x1f; 1019 if (periph_id >= ch->parent->num_periph_req) { 1020 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 1021 return; 1022 } 1023 if (ch->ns && !(ch->parent->cfg[CFG_PNS] & (1 << periph_id))) { 1024 pl330_fault(ch, PL330_FAULT_CH_PERIPH_ERR); 1025 return; 1026 } 1027 switch (bs) { 1028 case 0: /* S */ 1029 ch->request_flag = PL330_SINGLE; 1030 ch->wfp_sbp = 0; 1031 break; 1032 case 1: /* P */ 1033 ch->request_flag = PL330_BURST; 1034 ch->wfp_sbp = 2; 1035 break; 1036 case 2: /* B */ 1037 ch->request_flag = PL330_BURST; 1038 ch->wfp_sbp = 1; 1039 break; 1040 default: 1041 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 1042 return; 1043 } 1044 1045 if (ch->parent->periph_busy[periph_id]) { 1046 ch->state = pl330_chan_waiting_periph; 1047 ch->stall = 1; 1048 } else if (ch->state == pl330_chan_waiting_periph) { 1049 ch->state = pl330_chan_executing; 1050 } 1051 } 1052 1053 static void pl330_dmawmb(PL330Chan *ch, uint8_t opcode, 1054 uint8_t *args, int len) 1055 { 1056 if (pl330_queue_find_insn(&ch->parent->write_queue, ch->tag, false)) { 1057 ch->state = pl330_chan_at_barrier; 1058 ch->stall = 1; 1059 return; 1060 } else { 1061 ch->state = pl330_chan_executing; 1062 } 1063 } 1064 1065 /* NULL terminated array of the instruction descriptions. */ 1066 static const PL330InsnDesc insn_desc[] = { 1067 { .opcode = 0x54, .opmask = 0xFD, .size = 3, .exec = pl330_dmaaddh, }, 1068 { .opcode = 0x5c, .opmask = 0xFD, .size = 3, .exec = pl330_dmaadnh, }, 1069 { .opcode = 0x00, .opmask = 0xFF, .size = 1, .exec = pl330_dmaend, }, 1070 { .opcode = 0x35, .opmask = 0xFF, .size = 2, .exec = pl330_dmaflushp, }, 1071 { .opcode = 0xA0, .opmask = 0xFD, .size = 6, .exec = pl330_dmago, }, 1072 { .opcode = 0x04, .opmask = 0xFC, .size = 1, .exec = pl330_dmald, }, 1073 { .opcode = 0x25, .opmask = 0xFD, .size = 2, .exec = pl330_dmaldp, }, 1074 { .opcode = 0x20, .opmask = 0xFD, .size = 2, .exec = pl330_dmalp, }, 1075 /* dmastp must be before dmalpend in this list, because their maps 1076 * are overlapping 1077 */ 1078 { .opcode = 0x29, .opmask = 0xFD, .size = 2, .exec = pl330_dmastp, }, 1079 { .opcode = 0x28, .opmask = 0xE8, .size = 2, .exec = pl330_dmalpend, }, 1080 { .opcode = 0x01, .opmask = 0xFF, .size = 1, .exec = pl330_dmakill, }, 1081 { .opcode = 0xBC, .opmask = 0xFF, .size = 6, .exec = pl330_dmamov, }, 1082 { .opcode = 0x18, .opmask = 0xFF, .size = 1, .exec = pl330_dmanop, }, 1083 { .opcode = 0x12, .opmask = 0xFF, .size = 1, .exec = pl330_dmarmb, }, 1084 { .opcode = 0x34, .opmask = 0xFF, .size = 2, .exec = pl330_dmasev, }, 1085 { .opcode = 0x08, .opmask = 0xFC, .size = 1, .exec = pl330_dmast, }, 1086 { .opcode = 0x0C, .opmask = 0xFF, .size = 1, .exec = pl330_dmastz, }, 1087 { .opcode = 0x36, .opmask = 0xFF, .size = 2, .exec = pl330_dmawfe, }, 1088 { .opcode = 0x30, .opmask = 0xFC, .size = 2, .exec = pl330_dmawfp, }, 1089 { .opcode = 0x13, .opmask = 0xFF, .size = 1, .exec = pl330_dmawmb, }, 1090 { .opcode = 0x00, .opmask = 0x00, .size = 0, .exec = NULL, } 1091 }; 1092 1093 /* Instructions which can be issued via debug registers. */ 1094 static const PL330InsnDesc debug_insn_desc[] = { 1095 { .opcode = 0xA0, .opmask = 0xFD, .size = 6, .exec = pl330_dmago, }, 1096 { .opcode = 0x01, .opmask = 0xFF, .size = 1, .exec = pl330_dmakill, }, 1097 { .opcode = 0x34, .opmask = 0xFF, .size = 2, .exec = pl330_dmasev, }, 1098 { .opcode = 0x00, .opmask = 0x00, .size = 0, .exec = NULL, } 1099 }; 1100 1101 static inline const PL330InsnDesc *pl330_fetch_insn(PL330Chan *ch) 1102 { 1103 uint8_t opcode; 1104 int i; 1105 1106 dma_memory_read(ch->parent->mem_as, ch->pc, &opcode, 1, 1107 MEMTXATTRS_UNSPECIFIED); 1108 for (i = 0; insn_desc[i].size; i++) { 1109 if ((opcode & insn_desc[i].opmask) == insn_desc[i].opcode) { 1110 return &insn_desc[i]; 1111 } 1112 } 1113 return NULL; 1114 } 1115 1116 static inline void pl330_exec_insn(PL330Chan *ch, const PL330InsnDesc *insn) 1117 { 1118 uint8_t buf[PL330_INSN_MAXSIZE]; 1119 1120 assert(insn->size <= PL330_INSN_MAXSIZE); 1121 dma_memory_read(ch->parent->mem_as, ch->pc, buf, insn->size, 1122 MEMTXATTRS_UNSPECIFIED); 1123 insn->exec(ch, buf[0], &buf[1], insn->size - 1); 1124 } 1125 1126 static inline void pl330_update_pc(PL330Chan *ch, 1127 const PL330InsnDesc *insn) 1128 { 1129 ch->pc += insn->size; 1130 } 1131 1132 /* Try to execute current instruction in channel CH. Number of executed 1133 instructions is returned (0 or 1). */ 1134 static int pl330_chan_exec(PL330Chan *ch) 1135 { 1136 const PL330InsnDesc *insn; 1137 1138 if (ch->state != pl330_chan_executing && 1139 ch->state != pl330_chan_waiting_periph && 1140 ch->state != pl330_chan_at_barrier && 1141 ch->state != pl330_chan_waiting_event) { 1142 return 0; 1143 } 1144 ch->stall = 0; 1145 insn = pl330_fetch_insn(ch); 1146 if (!insn) { 1147 trace_pl330_chan_exec_undef(); 1148 pl330_fault(ch, PL330_FAULT_UNDEF_INSTR); 1149 return 0; 1150 } 1151 pl330_exec_insn(ch, insn); 1152 if (!ch->stall) { 1153 pl330_update_pc(ch, insn); 1154 ch->watchdog_timer = 0; 1155 return 1; 1156 /* WDT only active in exec state */ 1157 } else if (ch->state == pl330_chan_executing) { 1158 ch->watchdog_timer++; 1159 if (ch->watchdog_timer >= PL330_WATCHDOG_LIMIT) { 1160 pl330_fault(ch, PL330_FAULT_LOCKUP_ERR); 1161 } 1162 } 1163 return 0; 1164 } 1165 1166 /* Try to execute 1 instruction in each channel, one instruction from read 1167 queue and one instruction from write queue. Number of successfully executed 1168 instructions is returned. */ 1169 static int pl330_exec_cycle(PL330Chan *channel) 1170 { 1171 PL330State *s = channel->parent; 1172 PL330QueueEntry *q; 1173 int i; 1174 int num_exec = 0; 1175 int fifo_res = 0; 1176 uint8_t buf[PL330_MAX_BURST_LEN]; 1177 1178 /* Execute one instruction in each channel */ 1179 num_exec += pl330_chan_exec(channel); 1180 1181 /* Execute one instruction from read queue */ 1182 q = pl330_queue_find_insn(&s->read_queue, PL330_UNTAGGED, true); 1183 if (q != NULL && q->len <= pl330_fifo_num_free(&s->fifo)) { 1184 int len = q->len - (q->addr & (q->len - 1)); 1185 1186 dma_memory_read(s->mem_as, q->addr, buf, len, 1187 MEMTXATTRS_UNSPECIFIED); 1188 trace_pl330_exec_cycle(q->addr, len); 1189 if (trace_event_get_state_backends(TRACE_PL330_HEXDUMP)) { 1190 pl330_hexdump(buf, len); 1191 } 1192 fifo_res = pl330_fifo_push(&s->fifo, buf, len, q->tag); 1193 if (fifo_res == PL330_FIFO_OK) { 1194 if (q->inc) { 1195 q->addr += len; 1196 } 1197 q->n--; 1198 if (!q->n) { 1199 pl330_queue_remove_insn(&s->read_queue, q); 1200 } 1201 num_exec++; 1202 } 1203 } 1204 1205 /* Execute one instruction from write queue. */ 1206 q = pl330_queue_find_insn(&s->write_queue, pl330_fifo_tag(&s->fifo), true); 1207 if (q != NULL) { 1208 int len = q->len - (q->addr & (q->len - 1)); 1209 1210 if (q->z) { 1211 for (i = 0; i < len; i++) { 1212 buf[i] = 0; 1213 } 1214 } else { 1215 fifo_res = pl330_fifo_get(&s->fifo, buf, len, q->tag); 1216 } 1217 if (fifo_res == PL330_FIFO_OK || q->z) { 1218 dma_memory_write(s->mem_as, q->addr, buf, len, 1219 MEMTXATTRS_UNSPECIFIED); 1220 trace_pl330_exec_cycle(q->addr, len); 1221 if (trace_event_get_state_backends(TRACE_PL330_HEXDUMP)) { 1222 pl330_hexdump(buf, len); 1223 } 1224 if (q->inc) { 1225 q->addr += len; 1226 } 1227 num_exec++; 1228 } else if (fifo_res == PL330_FIFO_STALL) { 1229 pl330_fault(&channel->parent->chan[q->tag], 1230 PL330_FAULT_FIFOEMPTY_ERR); 1231 } 1232 q->n--; 1233 if (!q->n) { 1234 pl330_queue_remove_insn(&s->write_queue, q); 1235 } 1236 } 1237 1238 return num_exec; 1239 } 1240 1241 static int pl330_exec_channel(PL330Chan *channel) 1242 { 1243 int insr_exec = 0; 1244 1245 /* TODO: Is it all right to execute everything or should we do per-cycle 1246 simulation? */ 1247 while (pl330_exec_cycle(channel)) { 1248 insr_exec++; 1249 } 1250 1251 /* Detect deadlock */ 1252 if (channel->state == pl330_chan_executing) { 1253 pl330_fault(channel, PL330_FAULT_LOCKUP_ERR); 1254 } 1255 /* Situation when one of the queues has deadlocked but all channels 1256 * have finished their programs should be impossible. 1257 */ 1258 1259 return insr_exec; 1260 } 1261 1262 static inline void pl330_exec(PL330State *s) 1263 { 1264 int i, insr_exec; 1265 trace_pl330_exec(); 1266 do { 1267 insr_exec = pl330_exec_channel(&s->manager); 1268 1269 for (i = 0; i < s->num_chnls; i++) { 1270 insr_exec += pl330_exec_channel(&s->chan[i]); 1271 } 1272 } while (insr_exec); 1273 } 1274 1275 static void pl330_exec_cycle_timer(void *opaque) 1276 { 1277 PL330State *s = (PL330State *)opaque; 1278 pl330_exec(s); 1279 } 1280 1281 /* Stop or restore dma operations */ 1282 1283 static void pl330_dma_stop_irq(void *opaque, int irq, int level) 1284 { 1285 PL330State *s = (PL330State *)opaque; 1286 1287 if (s->periph_busy[irq] != level) { 1288 s->periph_busy[irq] = level; 1289 timer_mod(s->timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL)); 1290 } 1291 } 1292 1293 static void pl330_debug_exec(PL330State *s) 1294 { 1295 uint8_t args[5]; 1296 uint8_t opcode; 1297 uint8_t chan_id; 1298 int i; 1299 PL330Chan *ch; 1300 const PL330InsnDesc *insn; 1301 1302 s->debug_status = 1; 1303 chan_id = (s->dbg[0] >> 8) & 0x07; 1304 opcode = (s->dbg[0] >> 16) & 0xff; 1305 args[0] = (s->dbg[0] >> 24) & 0xff; 1306 args[1] = (s->dbg[1] >> 0) & 0xff; 1307 args[2] = (s->dbg[1] >> 8) & 0xff; 1308 args[3] = (s->dbg[1] >> 16) & 0xff; 1309 args[4] = (s->dbg[1] >> 24) & 0xff; 1310 trace_pl330_debug_exec(chan_id); 1311 if (s->dbg[0] & 1) { 1312 ch = &s->chan[chan_id]; 1313 } else { 1314 ch = &s->manager; 1315 } 1316 insn = NULL; 1317 for (i = 0; debug_insn_desc[i].size; i++) { 1318 if ((opcode & debug_insn_desc[i].opmask) == debug_insn_desc[i].opcode) { 1319 insn = &debug_insn_desc[i]; 1320 } 1321 } 1322 if (!insn) { 1323 pl330_fault(ch, PL330_FAULT_UNDEF_INSTR | PL330_FAULT_DBG_INSTR); 1324 return; 1325 } 1326 ch->stall = 0; 1327 insn->exec(ch, opcode, args, insn->size - 1); 1328 if (ch->fault_type) { 1329 ch->fault_type |= PL330_FAULT_DBG_INSTR; 1330 } 1331 if (ch->stall) { 1332 trace_pl330_debug_exec_stall(); 1333 qemu_log_mask(LOG_UNIMP, "pl330: stall of debug instruction not " 1334 "implemented\n"); 1335 } 1336 s->debug_status = 0; 1337 } 1338 1339 /* IOMEM mapped registers */ 1340 1341 static void pl330_iomem_write(void *opaque, hwaddr offset, 1342 uint64_t value, unsigned size) 1343 { 1344 PL330State *s = (PL330State *) opaque; 1345 int i; 1346 1347 trace_pl330_iomem_write((unsigned)offset, (unsigned)value); 1348 1349 switch (offset) { 1350 case PL330_REG_INTEN: 1351 s->inten = value; 1352 break; 1353 case PL330_REG_INTCLR: 1354 for (i = 0; i < s->num_events; i++) { 1355 if (s->int_status & s->inten & value & (1 << i)) { 1356 trace_pl330_iomem_write_clr(i); 1357 qemu_irq_lower(s->irq[i]); 1358 } 1359 } 1360 s->ev_status &= ~(value & s->inten); 1361 s->int_status &= ~(value & s->inten); 1362 break; 1363 case PL330_REG_DBGCMD: 1364 if ((value & 3) == 0) { 1365 pl330_debug_exec(s); 1366 pl330_exec(s); 1367 } else { 1368 qemu_log_mask(LOG_GUEST_ERROR, "pl330: write of illegal value %u " 1369 "for offset " HWADDR_FMT_plx "\n", (unsigned)value, 1370 offset); 1371 } 1372 break; 1373 case PL330_REG_DBGINST0: 1374 s->dbg[0] = value; 1375 break; 1376 case PL330_REG_DBGINST1: 1377 s->dbg[1] = value; 1378 break; 1379 default: 1380 qemu_log_mask(LOG_GUEST_ERROR, "pl330: bad write offset " HWADDR_FMT_plx 1381 "\n", offset); 1382 break; 1383 } 1384 } 1385 1386 static inline uint32_t pl330_iomem_read_imp(void *opaque, 1387 hwaddr offset) 1388 { 1389 PL330State *s = (PL330State *)opaque; 1390 int chan_id; 1391 int i; 1392 uint32_t res; 1393 1394 if (offset >= PL330_REG_PERIPH_ID && offset < PL330_REG_PERIPH_ID + 32) { 1395 return pl330_id[(offset - PL330_REG_PERIPH_ID) >> 2]; 1396 } 1397 if (offset >= PL330_REG_CR0_BASE && offset < PL330_REG_CR0_BASE + 24) { 1398 return s->cfg[(offset - PL330_REG_CR0_BASE) >> 2]; 1399 } 1400 if (offset >= PL330_REG_CHANCTRL && offset < PL330_REG_DBGSTATUS) { 1401 offset -= PL330_REG_CHANCTRL; 1402 chan_id = offset >> 5; 1403 if (chan_id >= s->num_chnls) { 1404 qemu_log_mask(LOG_GUEST_ERROR, "pl330: bad read offset " 1405 HWADDR_FMT_plx "\n", offset); 1406 return 0; 1407 } 1408 switch (offset & 0x1f) { 1409 case 0x00: 1410 return s->chan[chan_id].src; 1411 case 0x04: 1412 return s->chan[chan_id].dst; 1413 case 0x08: 1414 return s->chan[chan_id].control; 1415 case 0x0C: 1416 return s->chan[chan_id].lc[0]; 1417 case 0x10: 1418 return s->chan[chan_id].lc[1]; 1419 default: 1420 qemu_log_mask(LOG_GUEST_ERROR, "pl330: bad read offset " 1421 HWADDR_FMT_plx "\n", offset); 1422 return 0; 1423 } 1424 } 1425 if (offset >= PL330_REG_CSR_BASE && offset < 0x400) { 1426 offset -= PL330_REG_CSR_BASE; 1427 chan_id = offset >> 3; 1428 if (chan_id >= s->num_chnls) { 1429 qemu_log_mask(LOG_GUEST_ERROR, "pl330: bad read offset " 1430 HWADDR_FMT_plx "\n", offset); 1431 return 0; 1432 } 1433 switch ((offset >> 2) & 1) { 1434 case 0x0: 1435 res = (s->chan[chan_id].ns << 21) | 1436 (s->chan[chan_id].wakeup << 4) | 1437 (s->chan[chan_id].state) | 1438 (s->chan[chan_id].wfp_sbp << 14); 1439 return res; 1440 case 0x1: 1441 return s->chan[chan_id].pc; 1442 default: 1443 qemu_log_mask(LOG_GUEST_ERROR, "pl330: read error\n"); 1444 return 0; 1445 } 1446 } 1447 if (offset >= PL330_REG_FTR_BASE && offset < 0x100) { 1448 offset -= PL330_REG_FTR_BASE; 1449 chan_id = offset >> 2; 1450 if (chan_id >= s->num_chnls) { 1451 qemu_log_mask(LOG_GUEST_ERROR, "pl330: bad read offset " 1452 HWADDR_FMT_plx "\n", offset); 1453 return 0; 1454 } 1455 return s->chan[chan_id].fault_type; 1456 } 1457 switch (offset) { 1458 case PL330_REG_DSR: 1459 return (s->manager.ns << 9) | (s->manager.wakeup << 4) | 1460 (s->manager.state & 0xf); 1461 case PL330_REG_DPC: 1462 return s->manager.pc; 1463 case PL330_REG_INTEN: 1464 return s->inten; 1465 case PL330_REG_INT_EVENT_RIS: 1466 return s->ev_status; 1467 case PL330_REG_INTMIS: 1468 return s->int_status; 1469 case PL330_REG_INTCLR: 1470 /* Documentation says that we can't read this register 1471 * but linux kernel does it 1472 */ 1473 return 0; 1474 case PL330_REG_FSRD: 1475 return s->manager.state ? 1 : 0; 1476 case PL330_REG_FSRC: 1477 res = 0; 1478 for (i = 0; i < s->num_chnls; i++) { 1479 if (s->chan[i].state == pl330_chan_fault || 1480 s->chan[i].state == pl330_chan_fault_completing) { 1481 res |= 1 << i; 1482 } 1483 } 1484 return res; 1485 case PL330_REG_FTRD: 1486 return s->manager.fault_type; 1487 case PL330_REG_DBGSTATUS: 1488 return s->debug_status; 1489 default: 1490 qemu_log_mask(LOG_GUEST_ERROR, "pl330: bad read offset " 1491 HWADDR_FMT_plx "\n", offset); 1492 } 1493 return 0; 1494 } 1495 1496 static uint64_t pl330_iomem_read(void *opaque, hwaddr offset, 1497 unsigned size) 1498 { 1499 uint32_t ret = pl330_iomem_read_imp(opaque, offset); 1500 trace_pl330_iomem_read((uint32_t)offset, ret); 1501 return ret; 1502 } 1503 1504 static const MemoryRegionOps pl330_ops = { 1505 .read = pl330_iomem_read, 1506 .write = pl330_iomem_write, 1507 .endianness = DEVICE_NATIVE_ENDIAN, 1508 .impl = { 1509 .min_access_size = 4, 1510 .max_access_size = 4, 1511 } 1512 }; 1513 1514 /* Controller logic and initialization */ 1515 1516 static void pl330_chan_reset(PL330Chan *ch) 1517 { 1518 ch->src = 0; 1519 ch->dst = 0; 1520 ch->pc = 0; 1521 ch->state = pl330_chan_stopped; 1522 ch->watchdog_timer = 0; 1523 ch->stall = 0; 1524 ch->control = 0; 1525 ch->status = 0; 1526 ch->fault_type = 0; 1527 } 1528 1529 static void pl330_reset(DeviceState *d) 1530 { 1531 int i; 1532 PL330State *s = PL330(d); 1533 1534 s->inten = 0; 1535 s->int_status = 0; 1536 s->ev_status = 0; 1537 s->debug_status = 0; 1538 s->num_faulting = 0; 1539 s->manager.ns = s->mgr_ns_at_rst; 1540 pl330_fifo_reset(&s->fifo); 1541 pl330_queue_reset(&s->read_queue); 1542 pl330_queue_reset(&s->write_queue); 1543 1544 for (i = 0; i < s->num_chnls; i++) { 1545 pl330_chan_reset(&s->chan[i]); 1546 } 1547 for (i = 0; i < s->num_periph_req; i++) { 1548 s->periph_busy[i] = 0; 1549 } 1550 1551 timer_del(s->timer); 1552 } 1553 1554 static void pl330_realize(DeviceState *dev, Error **errp) 1555 { 1556 int i; 1557 PL330State *s = PL330(dev); 1558 1559 sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq_abort); 1560 memory_region_init_io(&s->iomem, OBJECT(s), &pl330_ops, s, 1561 "dma", PL330_IOMEM_SIZE); 1562 sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem); 1563 1564 if (!s->mem_mr) { 1565 error_setg(errp, "'memory' link is not set"); 1566 return; 1567 } else if (s->mem_mr == get_system_memory()) { 1568 /* Avoid creating new AS for system memory. */ 1569 s->mem_as = &address_space_memory; 1570 } else { 1571 s->mem_as = g_new0(AddressSpace, 1); 1572 address_space_init(s->mem_as, s->mem_mr, 1573 memory_region_name(s->mem_mr)); 1574 } 1575 1576 s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, pl330_exec_cycle_timer, s); 1577 1578 s->cfg[0] = (s->mgr_ns_at_rst ? 0x4 : 0) | 1579 (s->num_periph_req > 0 ? 1 : 0) | 1580 ((s->num_chnls - 1) & 0x7) << 4 | 1581 ((s->num_periph_req - 1) & 0x1f) << 12 | 1582 ((s->num_events - 1) & 0x1f) << 17; 1583 1584 switch (s->i_cache_len) { 1585 case (4): 1586 s->cfg[1] |= 2; 1587 break; 1588 case (8): 1589 s->cfg[1] |= 3; 1590 break; 1591 case (16): 1592 s->cfg[1] |= 4; 1593 break; 1594 case (32): 1595 s->cfg[1] |= 5; 1596 break; 1597 default: 1598 error_setg(errp, "Bad value for i-cache_len property: %" PRIx8, 1599 s->i_cache_len); 1600 return; 1601 } 1602 s->cfg[1] |= ((s->num_i_cache_lines - 1) & 0xf) << 4; 1603 1604 s->chan = g_new0(PL330Chan, s->num_chnls); 1605 s->hi_seqn = g_new0(uint8_t, s->num_chnls); 1606 s->lo_seqn = g_new0(uint8_t, s->num_chnls); 1607 for (i = 0; i < s->num_chnls; i++) { 1608 s->chan[i].parent = s; 1609 s->chan[i].tag = (uint8_t)i; 1610 } 1611 s->manager.parent = s; 1612 s->manager.tag = s->num_chnls; 1613 s->manager.is_manager = true; 1614 1615 s->irq = g_new0(qemu_irq, s->num_events); 1616 for (i = 0; i < s->num_events; i++) { 1617 sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq[i]); 1618 } 1619 1620 qdev_init_gpio_in(dev, pl330_dma_stop_irq, PL330_PERIPH_NUM); 1621 1622 switch (s->data_width) { 1623 case (32): 1624 s->cfg[CFG_CRD] |= 0x2; 1625 break; 1626 case (64): 1627 s->cfg[CFG_CRD] |= 0x3; 1628 break; 1629 case (128): 1630 s->cfg[CFG_CRD] |= 0x4; 1631 break; 1632 default: 1633 error_setg(errp, "Bad value for data_width property: %" PRIx8, 1634 s->data_width); 1635 return; 1636 } 1637 1638 s->cfg[CFG_CRD] |= ((s->wr_cap - 1) & 0x7) << 4 | 1639 ((s->wr_q_dep - 1) & 0xf) << 8 | 1640 ((s->rd_cap - 1) & 0x7) << 12 | 1641 ((s->rd_q_dep - 1) & 0xf) << 16 | 1642 ((s->data_buffer_dep - 1) & 0x1ff) << 20; 1643 1644 pl330_queue_init(&s->read_queue, s->rd_q_dep, s); 1645 pl330_queue_init(&s->write_queue, s->wr_q_dep, s); 1646 pl330_fifo_init(&s->fifo, s->data_width / 4 * s->data_buffer_dep); 1647 } 1648 1649 static Property pl330_properties[] = { 1650 /* CR0 */ 1651 DEFINE_PROP_UINT32("num_chnls", PL330State, num_chnls, 8), 1652 DEFINE_PROP_UINT8("num_periph_req", PL330State, num_periph_req, 4), 1653 DEFINE_PROP_UINT8("num_events", PL330State, num_events, 16), 1654 DEFINE_PROP_UINT8("mgr_ns_at_rst", PL330State, mgr_ns_at_rst, 0), 1655 /* CR1 */ 1656 DEFINE_PROP_UINT8("i-cache_len", PL330State, i_cache_len, 4), 1657 DEFINE_PROP_UINT8("num_i-cache_lines", PL330State, num_i_cache_lines, 8), 1658 /* CR2-4 */ 1659 DEFINE_PROP_UINT32("boot_addr", PL330State, cfg[CFG_BOOT_ADDR], 0), 1660 DEFINE_PROP_UINT32("INS", PL330State, cfg[CFG_INS], 0), 1661 DEFINE_PROP_UINT32("PNS", PL330State, cfg[CFG_PNS], 0), 1662 /* CRD */ 1663 DEFINE_PROP_UINT8("data_width", PL330State, data_width, 64), 1664 DEFINE_PROP_UINT8("wr_cap", PL330State, wr_cap, 8), 1665 DEFINE_PROP_UINT8("wr_q_dep", PL330State, wr_q_dep, 16), 1666 DEFINE_PROP_UINT8("rd_cap", PL330State, rd_cap, 8), 1667 DEFINE_PROP_UINT8("rd_q_dep", PL330State, rd_q_dep, 16), 1668 DEFINE_PROP_UINT16("data_buffer_dep", PL330State, data_buffer_dep, 256), 1669 1670 DEFINE_PROP_LINK("memory", PL330State, mem_mr, 1671 TYPE_MEMORY_REGION, MemoryRegion *), 1672 1673 DEFINE_PROP_END_OF_LIST(), 1674 }; 1675 1676 static void pl330_class_init(ObjectClass *klass, void *data) 1677 { 1678 DeviceClass *dc = DEVICE_CLASS(klass); 1679 1680 dc->realize = pl330_realize; 1681 device_class_set_legacy_reset(dc, pl330_reset); 1682 device_class_set_props(dc, pl330_properties); 1683 dc->vmsd = &vmstate_pl330; 1684 } 1685 1686 static const TypeInfo pl330_type_info = { 1687 .name = TYPE_PL330, 1688 .parent = TYPE_SYS_BUS_DEVICE, 1689 .instance_size = sizeof(PL330State), 1690 .class_init = pl330_class_init, 1691 }; 1692 1693 static void pl330_register_types(void) 1694 { 1695 type_register_static(&pl330_type_info); 1696 } 1697 1698 type_init(pl330_register_types) 1699