1 /* 2 * ARM PrimeCell PL330 DMA Controller 3 * 4 * Copyright (c) 2009 Samsung Electronics. 5 * Contributed by Kirill Batuzov <batuzovk@ispras.ru> 6 * Copyright (c) 2012 Peter A.G. Crosthwaite (peter.crosthwaite@petalogix.com) 7 * Copyright (c) 2012 PetaLogix Pty Ltd. 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License 11 * as published by the Free Software Foundation; version 2 or later. 12 * 13 * You should have received a copy of the GNU General Public License along 14 * with this program; if not, see <http://www.gnu.org/licenses/>. 15 */ 16 17 #include "hw/sysbus.h" 18 #include "qemu/timer.h" 19 #include "sysemu/dma.h" 20 21 #ifndef PL330_ERR_DEBUG 22 #define PL330_ERR_DEBUG 0 23 #endif 24 25 #define DB_PRINT_L(lvl, fmt, args...) do {\ 26 if (PL330_ERR_DEBUG >= lvl) {\ 27 fprintf(stderr, "PL330: %s:" fmt, __func__, ## args);\ 28 } \ 29 } while (0); 30 31 #define DB_PRINT(fmt, args...) DB_PRINT_L(1, fmt, ## args) 32 33 #define PL330_PERIPH_NUM 32 34 #define PL330_MAX_BURST_LEN 128 35 #define PL330_INSN_MAXSIZE 6 36 37 #define PL330_FIFO_OK 0 38 #define PL330_FIFO_STALL 1 39 #define PL330_FIFO_ERR (-1) 40 41 #define PL330_FAULT_UNDEF_INSTR (1 << 0) 42 #define PL330_FAULT_OPERAND_INVALID (1 << 1) 43 #define PL330_FAULT_DMAGO_ERR (1 << 4) 44 #define PL330_FAULT_EVENT_ERR (1 << 5) 45 #define PL330_FAULT_CH_PERIPH_ERR (1 << 6) 46 #define PL330_FAULT_CH_RDWR_ERR (1 << 7) 47 #define PL330_FAULT_ST_DATA_UNAVAILABLE (1 << 12) 48 #define PL330_FAULT_FIFOEMPTY_ERR (1 << 13) 49 #define PL330_FAULT_INSTR_FETCH_ERR (1 << 16) 50 #define PL330_FAULT_DATA_WRITE_ERR (1 << 17) 51 #define PL330_FAULT_DATA_READ_ERR (1 << 18) 52 #define PL330_FAULT_DBG_INSTR (1 << 30) 53 #define PL330_FAULT_LOCKUP_ERR (1 << 31) 54 55 #define PL330_UNTAGGED 0xff 56 57 #define PL330_SINGLE 0x0 58 #define PL330_BURST 0x1 59 60 #define PL330_WATCHDOG_LIMIT 1024 61 62 /* IOMEM mapped registers */ 63 #define PL330_REG_DSR 0x000 64 #define PL330_REG_DPC 0x004 65 #define PL330_REG_INTEN 0x020 66 #define PL330_REG_INT_EVENT_RIS 0x024 67 #define PL330_REG_INTMIS 0x028 68 #define PL330_REG_INTCLR 0x02C 69 #define PL330_REG_FSRD 0x030 70 #define PL330_REG_FSRC 0x034 71 #define PL330_REG_FTRD 0x038 72 #define PL330_REG_FTR_BASE 0x040 73 #define PL330_REG_CSR_BASE 0x100 74 #define PL330_REG_CPC_BASE 0x104 75 #define PL330_REG_CHANCTRL 0x400 76 #define PL330_REG_DBGSTATUS 0xD00 77 #define PL330_REG_DBGCMD 0xD04 78 #define PL330_REG_DBGINST0 0xD08 79 #define PL330_REG_DBGINST1 0xD0C 80 #define PL330_REG_CR0_BASE 0xE00 81 #define PL330_REG_PERIPH_ID 0xFE0 82 83 #define PL330_IOMEM_SIZE 0x1000 84 85 #define CFG_BOOT_ADDR 2 86 #define CFG_INS 3 87 #define CFG_PNS 4 88 #define CFG_CRD 5 89 90 static const uint32_t pl330_id[] = { 91 0x30, 0x13, 0x24, 0x00, 0x0D, 0xF0, 0x05, 0xB1 92 }; 93 94 /* DMA channel states as they are described in PL330 Technical Reference Manual 95 * Most of them will not be used in emulation. 96 */ 97 typedef enum { 98 pl330_chan_stopped = 0, 99 pl330_chan_executing = 1, 100 pl330_chan_cache_miss = 2, 101 pl330_chan_updating_pc = 3, 102 pl330_chan_waiting_event = 4, 103 pl330_chan_at_barrier = 5, 104 pl330_chan_queue_busy = 6, 105 pl330_chan_waiting_periph = 7, 106 pl330_chan_killing = 8, 107 pl330_chan_completing = 9, 108 pl330_chan_fault_completing = 14, 109 pl330_chan_fault = 15, 110 } PL330ChanState; 111 112 typedef struct PL330State PL330State; 113 114 typedef struct PL330Chan { 115 uint32_t src; 116 uint32_t dst; 117 uint32_t pc; 118 uint32_t control; 119 uint32_t status; 120 uint32_t lc[2]; 121 uint32_t fault_type; 122 uint32_t watchdog_timer; 123 124 bool ns; 125 uint8_t request_flag; 126 uint8_t wakeup; 127 uint8_t wfp_sbp; 128 129 uint8_t state; 130 uint8_t stall; 131 132 bool is_manager; 133 PL330State *parent; 134 uint8_t tag; 135 } PL330Chan; 136 137 static const VMStateDescription vmstate_pl330_chan = { 138 .name = "pl330_chan", 139 .version_id = 1, 140 .minimum_version_id = 1, 141 .minimum_version_id_old = 1, 142 .fields = (VMStateField[]) { 143 VMSTATE_UINT32(src, PL330Chan), 144 VMSTATE_UINT32(dst, PL330Chan), 145 VMSTATE_UINT32(pc, PL330Chan), 146 VMSTATE_UINT32(control, PL330Chan), 147 VMSTATE_UINT32(status, PL330Chan), 148 VMSTATE_UINT32_ARRAY(lc, PL330Chan, 2), 149 VMSTATE_UINT32(fault_type, PL330Chan), 150 VMSTATE_UINT32(watchdog_timer, PL330Chan), 151 VMSTATE_BOOL(ns, PL330Chan), 152 VMSTATE_UINT8(request_flag, PL330Chan), 153 VMSTATE_UINT8(wakeup, PL330Chan), 154 VMSTATE_UINT8(wfp_sbp, PL330Chan), 155 VMSTATE_UINT8(state, PL330Chan), 156 VMSTATE_UINT8(stall, PL330Chan), 157 VMSTATE_END_OF_LIST() 158 } 159 }; 160 161 typedef struct PL330Fifo { 162 uint8_t *buf; 163 uint8_t *tag; 164 uint32_t head; 165 uint32_t num; 166 uint32_t buf_size; 167 } PL330Fifo; 168 169 static const VMStateDescription vmstate_pl330_fifo = { 170 .name = "pl330_chan", 171 .version_id = 1, 172 .minimum_version_id = 1, 173 .minimum_version_id_old = 1, 174 .fields = (VMStateField[]) { 175 VMSTATE_VBUFFER_UINT32(buf, PL330Fifo, 1, NULL, 0, buf_size), 176 VMSTATE_VBUFFER_UINT32(tag, PL330Fifo, 1, NULL, 0, buf_size), 177 VMSTATE_UINT32(head, PL330Fifo), 178 VMSTATE_UINT32(num, PL330Fifo), 179 VMSTATE_UINT32(buf_size, PL330Fifo), 180 VMSTATE_END_OF_LIST() 181 } 182 }; 183 184 typedef struct PL330QueueEntry { 185 uint32_t addr; 186 uint32_t len; 187 uint8_t n; 188 bool inc; 189 bool z; 190 uint8_t tag; 191 uint8_t seqn; 192 } PL330QueueEntry; 193 194 static const VMStateDescription vmstate_pl330_queue_entry = { 195 .name = "pl330_queue_entry", 196 .version_id = 1, 197 .minimum_version_id = 1, 198 .minimum_version_id_old = 1, 199 .fields = (VMStateField[]) { 200 VMSTATE_UINT32(addr, PL330QueueEntry), 201 VMSTATE_UINT32(len, PL330QueueEntry), 202 VMSTATE_UINT8(n, PL330QueueEntry), 203 VMSTATE_BOOL(inc, PL330QueueEntry), 204 VMSTATE_BOOL(z, PL330QueueEntry), 205 VMSTATE_UINT8(tag, PL330QueueEntry), 206 VMSTATE_UINT8(seqn, PL330QueueEntry), 207 VMSTATE_END_OF_LIST() 208 } 209 }; 210 211 typedef struct PL330Queue { 212 PL330State *parent; 213 PL330QueueEntry *queue; 214 uint32_t queue_size; 215 } PL330Queue; 216 217 static const VMStateDescription vmstate_pl330_queue = { 218 .name = "pl330_queue", 219 .version_id = 1, 220 .minimum_version_id = 1, 221 .minimum_version_id_old = 1, 222 .fields = (VMStateField[]) { 223 VMSTATE_STRUCT_VARRAY_UINT32(queue, PL330Queue, queue_size, 1, 224 vmstate_pl330_queue_entry, PL330QueueEntry), 225 VMSTATE_END_OF_LIST() 226 } 227 }; 228 229 struct PL330State { 230 SysBusDevice busdev; 231 MemoryRegion iomem; 232 qemu_irq irq_abort; 233 qemu_irq *irq; 234 235 /* Config registers. cfg[5] = CfgDn. */ 236 uint32_t cfg[6]; 237 #define EVENT_SEC_STATE 3 238 #define PERIPH_SEC_STATE 4 239 /* cfg 0 bits and pieces */ 240 uint32_t num_chnls; 241 uint8_t num_periph_req; 242 uint8_t num_events; 243 uint8_t mgr_ns_at_rst; 244 /* cfg 1 bits and pieces */ 245 uint8_t i_cache_len; 246 uint8_t num_i_cache_lines; 247 /* CRD bits and pieces */ 248 uint8_t data_width; 249 uint8_t wr_cap; 250 uint8_t wr_q_dep; 251 uint8_t rd_cap; 252 uint8_t rd_q_dep; 253 uint16_t data_buffer_dep; 254 255 PL330Chan manager; 256 PL330Chan *chan; 257 PL330Fifo fifo; 258 PL330Queue read_queue; 259 PL330Queue write_queue; 260 uint8_t *lo_seqn; 261 uint8_t *hi_seqn; 262 QEMUTimer *timer; /* is used for restore dma. */ 263 264 uint32_t inten; 265 uint32_t int_status; 266 uint32_t ev_status; 267 uint32_t dbg[2]; 268 uint8_t debug_status; 269 uint8_t num_faulting; 270 uint8_t periph_busy[PL330_PERIPH_NUM]; 271 272 }; 273 274 #define TYPE_PL330 "pl330" 275 #define PL330(obj) OBJECT_CHECK(PL330State, (obj), TYPE_PL330) 276 277 static const VMStateDescription vmstate_pl330 = { 278 .name = "pl330", 279 .version_id = 1, 280 .minimum_version_id = 1, 281 .minimum_version_id_old = 1, 282 .fields = (VMStateField[]) { 283 VMSTATE_STRUCT(manager, PL330State, 0, vmstate_pl330_chan, PL330Chan), 284 VMSTATE_STRUCT_VARRAY_UINT32(chan, PL330State, num_chnls, 0, 285 vmstate_pl330_chan, PL330Chan), 286 VMSTATE_VBUFFER_UINT32(lo_seqn, PL330State, 1, NULL, 0, num_chnls), 287 VMSTATE_VBUFFER_UINT32(hi_seqn, PL330State, 1, NULL, 0, num_chnls), 288 VMSTATE_STRUCT(fifo, PL330State, 0, vmstate_pl330_fifo, PL330Fifo), 289 VMSTATE_STRUCT(read_queue, PL330State, 0, vmstate_pl330_queue, 290 PL330Queue), 291 VMSTATE_STRUCT(write_queue, PL330State, 0, vmstate_pl330_queue, 292 PL330Queue), 293 VMSTATE_TIMER(timer, PL330State), 294 VMSTATE_UINT32(inten, PL330State), 295 VMSTATE_UINT32(int_status, PL330State), 296 VMSTATE_UINT32(ev_status, PL330State), 297 VMSTATE_UINT32_ARRAY(dbg, PL330State, 2), 298 VMSTATE_UINT8(debug_status, PL330State), 299 VMSTATE_UINT8(num_faulting, PL330State), 300 VMSTATE_UINT8_ARRAY(periph_busy, PL330State, PL330_PERIPH_NUM), 301 VMSTATE_END_OF_LIST() 302 } 303 }; 304 305 typedef struct PL330InsnDesc { 306 /* OPCODE of the instruction */ 307 uint8_t opcode; 308 /* Mask so we can select several sibling instructions, such as 309 DMALD, DMALDS and DMALDB */ 310 uint8_t opmask; 311 /* Size of instruction in bytes */ 312 uint8_t size; 313 /* Interpreter */ 314 void (*exec)(PL330Chan *, uint8_t opcode, uint8_t *args, int len); 315 } PL330InsnDesc; 316 317 318 /* MFIFO Implementation 319 * 320 * MFIFO is implemented as a cyclic buffer of BUF_SIZE size. Tagged bytes are 321 * stored in this buffer. Data is stored in BUF field, tags - in the 322 * corresponding array elements of TAG field. 323 */ 324 325 /* Initialize queue. */ 326 327 static void pl330_fifo_init(PL330Fifo *s, uint32_t size) 328 { 329 s->buf = g_malloc0(size); 330 s->tag = g_malloc0(size); 331 s->buf_size = size; 332 } 333 334 /* Cyclic increment */ 335 336 static inline int pl330_fifo_inc(PL330Fifo *s, int x) 337 { 338 return (x + 1) % s->buf_size; 339 } 340 341 /* Number of empty bytes in MFIFO */ 342 343 static inline int pl330_fifo_num_free(PL330Fifo *s) 344 { 345 return s->buf_size - s->num; 346 } 347 348 /* Push LEN bytes of data stored in BUF to MFIFO and tag it with TAG. 349 * Zero returned on success, PL330_FIFO_STALL if there is no enough free 350 * space in MFIFO to store requested amount of data. If push was unsuccessful 351 * no data is stored to MFIFO. 352 */ 353 354 static int pl330_fifo_push(PL330Fifo *s, uint8_t *buf, int len, uint8_t tag) 355 { 356 int i; 357 358 if (s->buf_size - s->num < len) { 359 return PL330_FIFO_STALL; 360 } 361 for (i = 0; i < len; i++) { 362 int push_idx = (s->head + s->num + i) % s->buf_size; 363 s->buf[push_idx] = buf[i]; 364 s->tag[push_idx] = tag; 365 } 366 s->num += len; 367 return PL330_FIFO_OK; 368 } 369 370 /* Get LEN bytes of data from MFIFO and store it to BUF. Tag value of each 371 * byte is verified. Zero returned on success, PL330_FIFO_ERR on tag mismatch 372 * and PL330_FIFO_STALL if there is no enough data in MFIFO. If get was 373 * unsuccessful no data is removed from MFIFO. 374 */ 375 376 static int pl330_fifo_get(PL330Fifo *s, uint8_t *buf, int len, uint8_t tag) 377 { 378 int i; 379 380 if (s->num < len) { 381 return PL330_FIFO_STALL; 382 } 383 for (i = 0; i < len; i++) { 384 if (s->tag[s->head] == tag) { 385 int get_idx = (s->head + i) % s->buf_size; 386 buf[i] = s->buf[get_idx]; 387 } else { /* Tag mismatch - Rollback transaction */ 388 return PL330_FIFO_ERR; 389 } 390 } 391 s->head = (s->head + len) % s->buf_size; 392 s->num -= len; 393 return PL330_FIFO_OK; 394 } 395 396 /* Reset MFIFO. This completely erases all data in it. */ 397 398 static inline void pl330_fifo_reset(PL330Fifo *s) 399 { 400 s->head = 0; 401 s->num = 0; 402 } 403 404 /* Return tag of the first byte stored in MFIFO. If MFIFO is empty 405 * PL330_UNTAGGED is returned. 406 */ 407 408 static inline uint8_t pl330_fifo_tag(PL330Fifo *s) 409 { 410 return (!s->num) ? PL330_UNTAGGED : s->tag[s->head]; 411 } 412 413 /* Returns non-zero if tag TAG is present in fifo or zero otherwise */ 414 415 static int pl330_fifo_has_tag(PL330Fifo *s, uint8_t tag) 416 { 417 int i, n; 418 419 i = s->head; 420 for (n = 0; n < s->num; n++) { 421 if (s->tag[i] == tag) { 422 return 1; 423 } 424 i = pl330_fifo_inc(s, i); 425 } 426 return 0; 427 } 428 429 /* Remove all entry tagged with TAG from MFIFO */ 430 431 static void pl330_fifo_tagged_remove(PL330Fifo *s, uint8_t tag) 432 { 433 int i, t, n; 434 435 t = i = s->head; 436 for (n = 0; n < s->num; n++) { 437 if (s->tag[i] != tag) { 438 s->buf[t] = s->buf[i]; 439 s->tag[t] = s->tag[i]; 440 t = pl330_fifo_inc(s, t); 441 } else { 442 s->num = s->num - 1; 443 } 444 i = pl330_fifo_inc(s, i); 445 } 446 } 447 448 /* Read-Write Queue implementation 449 * 450 * A Read-Write Queue stores up to QUEUE_SIZE instructions (loads or stores). 451 * Each instruction is described by source (for loads) or destination (for 452 * stores) address ADDR, width of data to be loaded/stored LEN, number of 453 * stores/loads to be performed N, INC bit, Z bit and TAG to identify channel 454 * this instruction belongs to. Queue does not store any information about 455 * nature of the instruction: is it load or store. PL330 has different queues 456 * for loads and stores so this is already known at the top level where it 457 * matters. 458 * 459 * Queue works as FIFO for instructions with equivalent tags, but can issue 460 * instructions with different tags in arbitrary order. SEQN field attached to 461 * each instruction helps to achieve this. For each TAG queue contains 462 * instructions with consecutive SEQN values ranging from LO_SEQN[TAG] to 463 * HI_SEQN[TAG]-1 inclusive. SEQN is 8-bit unsigned integer, so SEQN=255 is 464 * followed by SEQN=0. 465 * 466 * Z bit indicates that zeroes should be stored. No MFIFO fetches are performed 467 * in this case. 468 */ 469 470 static void pl330_queue_reset(PL330Queue *s) 471 { 472 int i; 473 474 for (i = 0; i < s->queue_size; i++) { 475 s->queue[i].tag = PL330_UNTAGGED; 476 } 477 } 478 479 /* Initialize queue */ 480 static void pl330_queue_init(PL330Queue *s, int size, PL330State *parent) 481 { 482 s->parent = parent; 483 s->queue = g_new0(PL330QueueEntry, size); 484 s->queue_size = size; 485 } 486 487 /* Returns pointer to an empty slot or NULL if queue is full */ 488 static PL330QueueEntry *pl330_queue_find_empty(PL330Queue *s) 489 { 490 int i; 491 492 for (i = 0; i < s->queue_size; i++) { 493 if (s->queue[i].tag == PL330_UNTAGGED) { 494 return &s->queue[i]; 495 } 496 } 497 return NULL; 498 } 499 500 /* Put instruction in queue. 501 * Return value: 502 * - zero - OK 503 * - non-zero - queue is full 504 */ 505 506 static int pl330_queue_put_insn(PL330Queue *s, uint32_t addr, 507 int len, int n, bool inc, bool z, uint8_t tag) 508 { 509 PL330QueueEntry *entry = pl330_queue_find_empty(s); 510 511 if (!entry) { 512 return 1; 513 } 514 entry->tag = tag; 515 entry->addr = addr; 516 entry->len = len; 517 entry->n = n; 518 entry->z = z; 519 entry->inc = inc; 520 entry->seqn = s->parent->hi_seqn[tag]; 521 s->parent->hi_seqn[tag]++; 522 return 0; 523 } 524 525 /* Returns a pointer to queue slot containing instruction which satisfies 526 * following conditions: 527 * - it has valid tag value (not PL330_UNTAGGED) 528 * - if enforce_seq is set it has to be issuable without violating queue 529 * logic (see above) 530 * - if TAG argument is not PL330_UNTAGGED this instruction has tag value 531 * equivalent to the argument TAG value. 532 * If such instruction cannot be found NULL is returned. 533 */ 534 535 static PL330QueueEntry *pl330_queue_find_insn(PL330Queue *s, uint8_t tag, 536 bool enforce_seq) 537 { 538 int i; 539 540 for (i = 0; i < s->queue_size; i++) { 541 if (s->queue[i].tag != PL330_UNTAGGED) { 542 if ((!enforce_seq || 543 s->queue[i].seqn == s->parent->lo_seqn[s->queue[i].tag]) && 544 (s->queue[i].tag == tag || tag == PL330_UNTAGGED || 545 s->queue[i].z)) { 546 return &s->queue[i]; 547 } 548 } 549 } 550 return NULL; 551 } 552 553 /* Removes instruction from queue. */ 554 555 static inline void pl330_queue_remove_insn(PL330Queue *s, PL330QueueEntry *e) 556 { 557 s->parent->lo_seqn[e->tag]++; 558 e->tag = PL330_UNTAGGED; 559 } 560 561 /* Removes all instructions tagged with TAG from queue. */ 562 563 static inline void pl330_queue_remove_tagged(PL330Queue *s, uint8_t tag) 564 { 565 int i; 566 567 for (i = 0; i < s->queue_size; i++) { 568 if (s->queue[i].tag == tag) { 569 s->queue[i].tag = PL330_UNTAGGED; 570 } 571 } 572 } 573 574 /* DMA instruction execution engine */ 575 576 /* Moves DMA channel to the FAULT state and updates it's status. */ 577 578 static inline void pl330_fault(PL330Chan *ch, uint32_t flags) 579 { 580 DB_PRINT("ch: %p, flags: %x\n", ch, flags); 581 ch->fault_type |= flags; 582 if (ch->state == pl330_chan_fault) { 583 return; 584 } 585 ch->state = pl330_chan_fault; 586 ch->parent->num_faulting++; 587 if (ch->parent->num_faulting == 1) { 588 DB_PRINT("abort interrupt raised\n"); 589 qemu_irq_raise(ch->parent->irq_abort); 590 } 591 } 592 593 /* 594 * For information about instructions see PL330 Technical Reference Manual. 595 * 596 * Arguments: 597 * CH - channel executing the instruction 598 * OPCODE - opcode 599 * ARGS - array of 8-bit arguments 600 * LEN - number of elements in ARGS array 601 */ 602 603 static void pl330_dmaaddh(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 604 { 605 uint16_t im = (((uint16_t)args[1]) << 8) | ((uint16_t)args[0]); 606 uint8_t ra = (opcode >> 1) & 1; 607 608 if (ch->is_manager) { 609 pl330_fault(ch, PL330_FAULT_UNDEF_INSTR); 610 return; 611 } 612 if (ra) { 613 ch->dst += im; 614 } else { 615 ch->src += im; 616 } 617 } 618 619 static void pl330_dmaend(PL330Chan *ch, uint8_t opcode, 620 uint8_t *args, int len) 621 { 622 PL330State *s = ch->parent; 623 624 if (ch->state == pl330_chan_executing && !ch->is_manager) { 625 /* Wait for all transfers to complete */ 626 if (pl330_fifo_has_tag(&s->fifo, ch->tag) || 627 pl330_queue_find_insn(&s->read_queue, ch->tag, false) != NULL || 628 pl330_queue_find_insn(&s->write_queue, ch->tag, false) != NULL) { 629 630 ch->stall = 1; 631 return; 632 } 633 } 634 DB_PRINT("DMA ending!\n"); 635 pl330_fifo_tagged_remove(&s->fifo, ch->tag); 636 pl330_queue_remove_tagged(&s->read_queue, ch->tag); 637 pl330_queue_remove_tagged(&s->write_queue, ch->tag); 638 ch->state = pl330_chan_stopped; 639 } 640 641 static void pl330_dmaflushp(PL330Chan *ch, uint8_t opcode, 642 uint8_t *args, int len) 643 { 644 uint8_t periph_id; 645 646 if (args[0] & 7) { 647 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 648 return; 649 } 650 periph_id = (args[0] >> 3) & 0x1f; 651 if (periph_id >= ch->parent->num_periph_req) { 652 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 653 return; 654 } 655 if (ch->ns && !(ch->parent->cfg[CFG_PNS] & (1 << periph_id))) { 656 pl330_fault(ch, PL330_FAULT_CH_PERIPH_ERR); 657 return; 658 } 659 /* Do nothing */ 660 } 661 662 static void pl330_dmago(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 663 { 664 uint8_t chan_id; 665 uint8_t ns; 666 uint32_t pc; 667 PL330Chan *s; 668 669 DB_PRINT("\n"); 670 671 if (!ch->is_manager) { 672 pl330_fault(ch, PL330_FAULT_UNDEF_INSTR); 673 return; 674 } 675 ns = !!(opcode & 2); 676 chan_id = args[0] & 7; 677 if ((args[0] >> 3)) { 678 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 679 return; 680 } 681 if (chan_id >= ch->parent->num_chnls) { 682 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 683 return; 684 } 685 pc = (((uint32_t)args[4]) << 24) | (((uint32_t)args[3]) << 16) | 686 (((uint32_t)args[2]) << 8) | (((uint32_t)args[1])); 687 if (ch->parent->chan[chan_id].state != pl330_chan_stopped) { 688 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 689 return; 690 } 691 if (ch->ns && !ns) { 692 pl330_fault(ch, PL330_FAULT_DMAGO_ERR); 693 return; 694 } 695 s = &ch->parent->chan[chan_id]; 696 s->ns = ns; 697 s->pc = pc; 698 s->state = pl330_chan_executing; 699 } 700 701 static void pl330_dmald(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 702 { 703 uint8_t bs = opcode & 3; 704 uint32_t size, num; 705 bool inc; 706 707 if (bs == 2) { 708 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 709 return; 710 } 711 if ((bs == 1 && ch->request_flag == PL330_BURST) || 712 (bs == 3 && ch->request_flag == PL330_SINGLE)) { 713 /* Perform NOP */ 714 return; 715 } 716 if (bs == 1 && ch->request_flag == PL330_SINGLE) { 717 num = 1; 718 } else { 719 num = ((ch->control >> 4) & 0xf) + 1; 720 } 721 size = (uint32_t)1 << ((ch->control >> 1) & 0x7); 722 inc = !!(ch->control & 1); 723 ch->stall = pl330_queue_put_insn(&ch->parent->read_queue, ch->src, 724 size, num, inc, 0, ch->tag); 725 if (!ch->stall) { 726 DB_PRINT("channel:%d address:%08x size:%d num:%d %c\n", 727 ch->tag, ch->src, size, num, inc ? 'Y' : 'N'); 728 ch->src += inc ? size * num - (ch->src & (size - 1)) : 0; 729 } 730 } 731 732 static void pl330_dmaldp(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 733 { 734 uint8_t periph_id; 735 736 if (args[0] & 7) { 737 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 738 return; 739 } 740 periph_id = (args[0] >> 3) & 0x1f; 741 if (periph_id >= ch->parent->num_periph_req) { 742 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 743 return; 744 } 745 if (ch->ns && !(ch->parent->cfg[CFG_PNS] & (1 << periph_id))) { 746 pl330_fault(ch, PL330_FAULT_CH_PERIPH_ERR); 747 return; 748 } 749 pl330_dmald(ch, opcode, args, len); 750 } 751 752 static void pl330_dmalp(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 753 { 754 uint8_t lc = (opcode & 2) >> 1; 755 756 ch->lc[lc] = args[0]; 757 } 758 759 static void pl330_dmakill(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 760 { 761 if (ch->state == pl330_chan_fault || 762 ch->state == pl330_chan_fault_completing) { 763 /* This is the only way for a channel to leave the faulting state */ 764 ch->fault_type = 0; 765 ch->parent->num_faulting--; 766 if (ch->parent->num_faulting == 0) { 767 DB_PRINT("abort interrupt lowered\n"); 768 qemu_irq_lower(ch->parent->irq_abort); 769 } 770 } 771 ch->state = pl330_chan_killing; 772 pl330_fifo_tagged_remove(&ch->parent->fifo, ch->tag); 773 pl330_queue_remove_tagged(&ch->parent->read_queue, ch->tag); 774 pl330_queue_remove_tagged(&ch->parent->write_queue, ch->tag); 775 ch->state = pl330_chan_stopped; 776 } 777 778 static void pl330_dmalpend(PL330Chan *ch, uint8_t opcode, 779 uint8_t *args, int len) 780 { 781 uint8_t nf = (opcode & 0x10) >> 4; 782 uint8_t bs = opcode & 3; 783 uint8_t lc = (opcode & 4) >> 2; 784 785 if (bs == 2) { 786 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 787 return; 788 } 789 if ((bs == 1 && ch->request_flag == PL330_BURST) || 790 (bs == 3 && ch->request_flag == PL330_SINGLE)) { 791 /* Perform NOP */ 792 return; 793 } 794 if (!nf || ch->lc[lc]) { 795 if (nf) { 796 ch->lc[lc]--; 797 } 798 DB_PRINT("loop reiteration\n"); 799 ch->pc -= args[0]; 800 ch->pc -= len + 1; 801 /* "ch->pc -= args[0] + len + 1" is incorrect when args[0] == 256 */ 802 } else { 803 DB_PRINT("loop fallthrough\n"); 804 } 805 } 806 807 808 static void pl330_dmamov(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 809 { 810 uint8_t rd = args[0] & 7; 811 uint32_t im; 812 813 if ((args[0] >> 3)) { 814 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 815 return; 816 } 817 im = (((uint32_t)args[4]) << 24) | (((uint32_t)args[3]) << 16) | 818 (((uint32_t)args[2]) << 8) | (((uint32_t)args[1])); 819 switch (rd) { 820 case 0: 821 ch->src = im; 822 break; 823 case 1: 824 ch->control = im; 825 break; 826 case 2: 827 ch->dst = im; 828 break; 829 default: 830 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 831 return; 832 } 833 } 834 835 static void pl330_dmanop(PL330Chan *ch, uint8_t opcode, 836 uint8_t *args, int len) 837 { 838 /* NOP is NOP. */ 839 } 840 841 static void pl330_dmarmb(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 842 { 843 if (pl330_queue_find_insn(&ch->parent->read_queue, ch->tag, false)) { 844 ch->state = pl330_chan_at_barrier; 845 ch->stall = 1; 846 return; 847 } else { 848 ch->state = pl330_chan_executing; 849 } 850 } 851 852 static void pl330_dmasev(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 853 { 854 uint8_t ev_id; 855 856 if (args[0] & 7) { 857 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 858 return; 859 } 860 ev_id = (args[0] >> 3) & 0x1f; 861 if (ev_id >= ch->parent->num_events) { 862 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 863 return; 864 } 865 if (ch->ns && !(ch->parent->cfg[CFG_INS] & (1 << ev_id))) { 866 pl330_fault(ch, PL330_FAULT_EVENT_ERR); 867 return; 868 } 869 if (ch->parent->inten & (1 << ev_id)) { 870 ch->parent->int_status |= (1 << ev_id); 871 DB_PRINT("event interrupt raised %d\n", ev_id); 872 qemu_irq_raise(ch->parent->irq[ev_id]); 873 } 874 ch->parent->ev_status |= (1 << ev_id); 875 } 876 877 static void pl330_dmast(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 878 { 879 uint8_t bs = opcode & 3; 880 uint32_t size, num; 881 bool inc; 882 883 if (bs == 2) { 884 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 885 return; 886 } 887 if ((bs == 1 && ch->request_flag == PL330_BURST) || 888 (bs == 3 && ch->request_flag == PL330_SINGLE)) { 889 /* Perform NOP */ 890 return; 891 } 892 num = ((ch->control >> 18) & 0xf) + 1; 893 size = (uint32_t)1 << ((ch->control >> 15) & 0x7); 894 inc = !!((ch->control >> 14) & 1); 895 ch->stall = pl330_queue_put_insn(&ch->parent->write_queue, ch->dst, 896 size, num, inc, 0, ch->tag); 897 if (!ch->stall) { 898 DB_PRINT("channel:%d address:%08x size:%d num:%d %c\n", 899 ch->tag, ch->dst, size, num, inc ? 'Y' : 'N'); 900 ch->dst += inc ? size * num - (ch->dst & (size - 1)) : 0; 901 } 902 } 903 904 static void pl330_dmastp(PL330Chan *ch, uint8_t opcode, 905 uint8_t *args, int len) 906 { 907 uint8_t periph_id; 908 909 if (args[0] & 7) { 910 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 911 return; 912 } 913 periph_id = (args[0] >> 3) & 0x1f; 914 if (periph_id >= ch->parent->num_periph_req) { 915 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 916 return; 917 } 918 if (ch->ns && !(ch->parent->cfg[CFG_PNS] & (1 << periph_id))) { 919 pl330_fault(ch, PL330_FAULT_CH_PERIPH_ERR); 920 return; 921 } 922 pl330_dmast(ch, opcode, args, len); 923 } 924 925 static void pl330_dmastz(PL330Chan *ch, uint8_t opcode, 926 uint8_t *args, int len) 927 { 928 uint32_t size, num; 929 bool inc; 930 931 num = ((ch->control >> 18) & 0xf) + 1; 932 size = (uint32_t)1 << ((ch->control >> 15) & 0x7); 933 inc = !!((ch->control >> 14) & 1); 934 ch->stall = pl330_queue_put_insn(&ch->parent->write_queue, ch->dst, 935 size, num, inc, 1, ch->tag); 936 if (inc) { 937 ch->dst += size * num; 938 } 939 } 940 941 static void pl330_dmawfe(PL330Chan *ch, uint8_t opcode, 942 uint8_t *args, int len) 943 { 944 uint8_t ev_id; 945 int i; 946 947 if (args[0] & 5) { 948 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 949 return; 950 } 951 ev_id = (args[0] >> 3) & 0x1f; 952 if (ev_id >= ch->parent->num_events) { 953 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 954 return; 955 } 956 if (ch->ns && !(ch->parent->cfg[CFG_INS] & (1 << ev_id))) { 957 pl330_fault(ch, PL330_FAULT_EVENT_ERR); 958 return; 959 } 960 ch->wakeup = ev_id; 961 ch->state = pl330_chan_waiting_event; 962 if (~ch->parent->inten & ch->parent->ev_status & 1 << ev_id) { 963 ch->state = pl330_chan_executing; 964 /* If anyone else is currently waiting on the same event, let them 965 * clear the ev_status so they pick up event as well 966 */ 967 for (i = 0; i < ch->parent->num_chnls; ++i) { 968 PL330Chan *peer = &ch->parent->chan[i]; 969 if (peer->state == pl330_chan_waiting_event && 970 peer->wakeup == ev_id) { 971 return; 972 } 973 } 974 ch->parent->ev_status &= ~(1 << ev_id); 975 } else { 976 ch->stall = 1; 977 } 978 } 979 980 static void pl330_dmawfp(PL330Chan *ch, uint8_t opcode, 981 uint8_t *args, int len) 982 { 983 uint8_t bs = opcode & 3; 984 uint8_t periph_id; 985 986 if (args[0] & 7) { 987 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 988 return; 989 } 990 periph_id = (args[0] >> 3) & 0x1f; 991 if (periph_id >= ch->parent->num_periph_req) { 992 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 993 return; 994 } 995 if (ch->ns && !(ch->parent->cfg[CFG_PNS] & (1 << periph_id))) { 996 pl330_fault(ch, PL330_FAULT_CH_PERIPH_ERR); 997 return; 998 } 999 switch (bs) { 1000 case 0: /* S */ 1001 ch->request_flag = PL330_SINGLE; 1002 ch->wfp_sbp = 0; 1003 break; 1004 case 1: /* P */ 1005 ch->request_flag = PL330_BURST; 1006 ch->wfp_sbp = 2; 1007 break; 1008 case 2: /* B */ 1009 ch->request_flag = PL330_BURST; 1010 ch->wfp_sbp = 1; 1011 break; 1012 default: 1013 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 1014 return; 1015 } 1016 1017 if (ch->parent->periph_busy[periph_id]) { 1018 ch->state = pl330_chan_waiting_periph; 1019 ch->stall = 1; 1020 } else if (ch->state == pl330_chan_waiting_periph) { 1021 ch->state = pl330_chan_executing; 1022 } 1023 } 1024 1025 static void pl330_dmawmb(PL330Chan *ch, uint8_t opcode, 1026 uint8_t *args, int len) 1027 { 1028 if (pl330_queue_find_insn(&ch->parent->write_queue, ch->tag, false)) { 1029 ch->state = pl330_chan_at_barrier; 1030 ch->stall = 1; 1031 return; 1032 } else { 1033 ch->state = pl330_chan_executing; 1034 } 1035 } 1036 1037 /* NULL terminated array of the instruction descriptions. */ 1038 static const PL330InsnDesc insn_desc[] = { 1039 { .opcode = 0x54, .opmask = 0xFD, .size = 3, .exec = pl330_dmaaddh, }, 1040 { .opcode = 0x00, .opmask = 0xFF, .size = 1, .exec = pl330_dmaend, }, 1041 { .opcode = 0x35, .opmask = 0xFF, .size = 2, .exec = pl330_dmaflushp, }, 1042 { .opcode = 0xA0, .opmask = 0xFD, .size = 6, .exec = pl330_dmago, }, 1043 { .opcode = 0x04, .opmask = 0xFC, .size = 1, .exec = pl330_dmald, }, 1044 { .opcode = 0x25, .opmask = 0xFD, .size = 2, .exec = pl330_dmaldp, }, 1045 { .opcode = 0x20, .opmask = 0xFD, .size = 2, .exec = pl330_dmalp, }, 1046 /* dmastp must be before dmalpend in this list, because their maps 1047 * are overlapping 1048 */ 1049 { .opcode = 0x29, .opmask = 0xFD, .size = 2, .exec = pl330_dmastp, }, 1050 { .opcode = 0x28, .opmask = 0xE8, .size = 2, .exec = pl330_dmalpend, }, 1051 { .opcode = 0x01, .opmask = 0xFF, .size = 1, .exec = pl330_dmakill, }, 1052 { .opcode = 0xBC, .opmask = 0xFF, .size = 6, .exec = pl330_dmamov, }, 1053 { .opcode = 0x18, .opmask = 0xFF, .size = 1, .exec = pl330_dmanop, }, 1054 { .opcode = 0x12, .opmask = 0xFF, .size = 1, .exec = pl330_dmarmb, }, 1055 { .opcode = 0x34, .opmask = 0xFF, .size = 2, .exec = pl330_dmasev, }, 1056 { .opcode = 0x08, .opmask = 0xFC, .size = 1, .exec = pl330_dmast, }, 1057 { .opcode = 0x0C, .opmask = 0xFF, .size = 1, .exec = pl330_dmastz, }, 1058 { .opcode = 0x36, .opmask = 0xFF, .size = 2, .exec = pl330_dmawfe, }, 1059 { .opcode = 0x30, .opmask = 0xFC, .size = 2, .exec = pl330_dmawfp, }, 1060 { .opcode = 0x13, .opmask = 0xFF, .size = 1, .exec = pl330_dmawmb, }, 1061 { .opcode = 0x00, .opmask = 0x00, .size = 0, .exec = NULL, } 1062 }; 1063 1064 /* Instructions which can be issued via debug registers. */ 1065 static const PL330InsnDesc debug_insn_desc[] = { 1066 { .opcode = 0xA0, .opmask = 0xFD, .size = 6, .exec = pl330_dmago, }, 1067 { .opcode = 0x01, .opmask = 0xFF, .size = 1, .exec = pl330_dmakill, }, 1068 { .opcode = 0x34, .opmask = 0xFF, .size = 2, .exec = pl330_dmasev, }, 1069 { .opcode = 0x00, .opmask = 0x00, .size = 0, .exec = NULL, } 1070 }; 1071 1072 static inline const PL330InsnDesc *pl330_fetch_insn(PL330Chan *ch) 1073 { 1074 uint8_t opcode; 1075 int i; 1076 1077 dma_memory_read(&address_space_memory, ch->pc, &opcode, 1); 1078 for (i = 0; insn_desc[i].size; i++) { 1079 if ((opcode & insn_desc[i].opmask) == insn_desc[i].opcode) { 1080 return &insn_desc[i]; 1081 } 1082 } 1083 return NULL; 1084 } 1085 1086 static inline void pl330_exec_insn(PL330Chan *ch, const PL330InsnDesc *insn) 1087 { 1088 uint8_t buf[PL330_INSN_MAXSIZE]; 1089 1090 assert(insn->size <= PL330_INSN_MAXSIZE); 1091 dma_memory_read(&address_space_memory, ch->pc, buf, insn->size); 1092 insn->exec(ch, buf[0], &buf[1], insn->size - 1); 1093 } 1094 1095 static inline void pl330_update_pc(PL330Chan *ch, 1096 const PL330InsnDesc *insn) 1097 { 1098 ch->pc += insn->size; 1099 } 1100 1101 /* Try to execute current instruction in channel CH. Number of executed 1102 instructions is returned (0 or 1). */ 1103 static int pl330_chan_exec(PL330Chan *ch) 1104 { 1105 const PL330InsnDesc *insn; 1106 1107 if (ch->state != pl330_chan_executing && 1108 ch->state != pl330_chan_waiting_periph && 1109 ch->state != pl330_chan_at_barrier && 1110 ch->state != pl330_chan_waiting_event) { 1111 DB_PRINT("%d\n", ch->state); 1112 return 0; 1113 } 1114 ch->stall = 0; 1115 insn = pl330_fetch_insn(ch); 1116 if (!insn) { 1117 DB_PRINT("pl330 undefined instruction\n"); 1118 pl330_fault(ch, PL330_FAULT_UNDEF_INSTR); 1119 return 0; 1120 } 1121 pl330_exec_insn(ch, insn); 1122 if (!ch->stall) { 1123 pl330_update_pc(ch, insn); 1124 ch->watchdog_timer = 0; 1125 return 1; 1126 /* WDT only active in exec state */ 1127 } else if (ch->state == pl330_chan_executing) { 1128 ch->watchdog_timer++; 1129 if (ch->watchdog_timer >= PL330_WATCHDOG_LIMIT) { 1130 pl330_fault(ch, PL330_FAULT_LOCKUP_ERR); 1131 } 1132 } 1133 return 0; 1134 } 1135 1136 /* Try to execute 1 instruction in each channel, one instruction from read 1137 queue and one instruction from write queue. Number of successfully executed 1138 instructions is returned. */ 1139 static int pl330_exec_cycle(PL330Chan *channel) 1140 { 1141 PL330State *s = channel->parent; 1142 PL330QueueEntry *q; 1143 int i; 1144 int num_exec = 0; 1145 int fifo_res = 0; 1146 uint8_t buf[PL330_MAX_BURST_LEN]; 1147 1148 /* Execute one instruction in each channel */ 1149 num_exec += pl330_chan_exec(channel); 1150 1151 /* Execute one instruction from read queue */ 1152 q = pl330_queue_find_insn(&s->read_queue, PL330_UNTAGGED, true); 1153 if (q != NULL && q->len <= pl330_fifo_num_free(&s->fifo)) { 1154 int len = q->len - (q->addr & (q->len - 1)); 1155 1156 dma_memory_read(&address_space_memory, q->addr, buf, len); 1157 if (PL330_ERR_DEBUG > 1) { 1158 DB_PRINT("PL330 read from memory @%08x (size = %08x):\n", 1159 q->addr, len); 1160 qemu_hexdump((char *)buf, stderr, "", len); 1161 } 1162 fifo_res = pl330_fifo_push(&s->fifo, buf, len, q->tag); 1163 if (fifo_res == PL330_FIFO_OK) { 1164 if (q->inc) { 1165 q->addr += len; 1166 } 1167 q->n--; 1168 if (!q->n) { 1169 pl330_queue_remove_insn(&s->read_queue, q); 1170 } 1171 num_exec++; 1172 } 1173 } 1174 1175 /* Execute one instruction from write queue. */ 1176 q = pl330_queue_find_insn(&s->write_queue, pl330_fifo_tag(&s->fifo), true); 1177 if (q != NULL) { 1178 int len = q->len - (q->addr & (q->len - 1)); 1179 1180 if (q->z) { 1181 for (i = 0; i < len; i++) { 1182 buf[i] = 0; 1183 } 1184 } else { 1185 fifo_res = pl330_fifo_get(&s->fifo, buf, len, q->tag); 1186 } 1187 if (fifo_res == PL330_FIFO_OK || q->z) { 1188 dma_memory_write(&address_space_memory, q->addr, buf, len); 1189 if (PL330_ERR_DEBUG > 1) { 1190 DB_PRINT("PL330 read from memory @%08x (size = %08x):\n", 1191 q->addr, len); 1192 qemu_hexdump((char *)buf, stderr, "", len); 1193 } 1194 if (q->inc) { 1195 q->addr += len; 1196 } 1197 num_exec++; 1198 } else if (fifo_res == PL330_FIFO_STALL) { 1199 pl330_fault(&channel->parent->chan[q->tag], 1200 PL330_FAULT_FIFOEMPTY_ERR); 1201 } 1202 q->n--; 1203 if (!q->n) { 1204 pl330_queue_remove_insn(&s->write_queue, q); 1205 } 1206 } 1207 1208 return num_exec; 1209 } 1210 1211 static int pl330_exec_channel(PL330Chan *channel) 1212 { 1213 int insr_exec = 0; 1214 1215 /* TODO: Is it all right to execute everything or should we do per-cycle 1216 simulation? */ 1217 while (pl330_exec_cycle(channel)) { 1218 insr_exec++; 1219 } 1220 1221 /* Detect deadlock */ 1222 if (channel->state == pl330_chan_executing) { 1223 pl330_fault(channel, PL330_FAULT_LOCKUP_ERR); 1224 } 1225 /* Situation when one of the queues has deadlocked but all channels 1226 * have finished their programs should be impossible. 1227 */ 1228 1229 return insr_exec; 1230 } 1231 1232 static inline void pl330_exec(PL330State *s) 1233 { 1234 DB_PRINT("\n"); 1235 int i, insr_exec; 1236 do { 1237 insr_exec = pl330_exec_channel(&s->manager); 1238 1239 for (i = 0; i < s->num_chnls; i++) { 1240 insr_exec += pl330_exec_channel(&s->chan[i]); 1241 } 1242 } while (insr_exec); 1243 } 1244 1245 static void pl330_exec_cycle_timer(void *opaque) 1246 { 1247 PL330State *s = (PL330State *)opaque; 1248 pl330_exec(s); 1249 } 1250 1251 /* Stop or restore dma operations */ 1252 1253 static void pl330_dma_stop_irq(void *opaque, int irq, int level) 1254 { 1255 PL330State *s = (PL330State *)opaque; 1256 1257 if (s->periph_busy[irq] != level) { 1258 s->periph_busy[irq] = level; 1259 qemu_mod_timer(s->timer, qemu_get_clock_ns(vm_clock)); 1260 } 1261 } 1262 1263 static void pl330_debug_exec(PL330State *s) 1264 { 1265 uint8_t args[5]; 1266 uint8_t opcode; 1267 uint8_t chan_id; 1268 int i; 1269 PL330Chan *ch; 1270 const PL330InsnDesc *insn; 1271 1272 s->debug_status = 1; 1273 chan_id = (s->dbg[0] >> 8) & 0x07; 1274 opcode = (s->dbg[0] >> 16) & 0xff; 1275 args[0] = (s->dbg[0] >> 24) & 0xff; 1276 args[1] = (s->dbg[1] >> 0) & 0xff; 1277 args[2] = (s->dbg[1] >> 8) & 0xff; 1278 args[3] = (s->dbg[1] >> 16) & 0xff; 1279 args[4] = (s->dbg[1] >> 24) & 0xff; 1280 DB_PRINT("chan id: %d\n", chan_id); 1281 if (s->dbg[0] & 1) { 1282 ch = &s->chan[chan_id]; 1283 } else { 1284 ch = &s->manager; 1285 } 1286 insn = NULL; 1287 for (i = 0; debug_insn_desc[i].size; i++) { 1288 if ((opcode & debug_insn_desc[i].opmask) == debug_insn_desc[i].opcode) { 1289 insn = &debug_insn_desc[i]; 1290 } 1291 } 1292 if (!insn) { 1293 pl330_fault(ch, PL330_FAULT_UNDEF_INSTR | PL330_FAULT_DBG_INSTR); 1294 return ; 1295 } 1296 ch->stall = 0; 1297 insn->exec(ch, opcode, args, insn->size - 1); 1298 if (ch->fault_type) { 1299 ch->fault_type |= PL330_FAULT_DBG_INSTR; 1300 } 1301 if (ch->stall) { 1302 qemu_log_mask(LOG_UNIMP, "pl330: stall of debug instruction not " 1303 "implemented\n"); 1304 } 1305 s->debug_status = 0; 1306 } 1307 1308 /* IOMEM mapped registers */ 1309 1310 static void pl330_iomem_write(void *opaque, hwaddr offset, 1311 uint64_t value, unsigned size) 1312 { 1313 PL330State *s = (PL330State *) opaque; 1314 uint32_t i; 1315 1316 DB_PRINT("addr: %08x data: %08x\n", (unsigned)offset, (unsigned)value); 1317 1318 switch (offset) { 1319 case PL330_REG_INTEN: 1320 s->inten = value; 1321 break; 1322 case PL330_REG_INTCLR: 1323 for (i = 0; i < s->num_events; i++) { 1324 if (s->int_status & s->inten & value & (1 << i)) { 1325 DB_PRINT("event interrupt lowered %d\n", i); 1326 qemu_irq_lower(s->irq[i]); 1327 } 1328 } 1329 s->ev_status &= ~(value & s->inten); 1330 s->int_status &= ~(value & s->inten); 1331 break; 1332 case PL330_REG_DBGCMD: 1333 if ((value & 3) == 0) { 1334 pl330_debug_exec(s); 1335 pl330_exec(s); 1336 } else { 1337 qemu_log_mask(LOG_GUEST_ERROR, "pl330: write of illegal value %u " 1338 "for offset " TARGET_FMT_plx "\n", (unsigned)value, 1339 offset); 1340 } 1341 break; 1342 case PL330_REG_DBGINST0: 1343 DB_PRINT("s->dbg[0] = %08x\n", (unsigned)value); 1344 s->dbg[0] = value; 1345 break; 1346 case PL330_REG_DBGINST1: 1347 DB_PRINT("s->dbg[1] = %08x\n", (unsigned)value); 1348 s->dbg[1] = value; 1349 break; 1350 default: 1351 qemu_log_mask(LOG_GUEST_ERROR, "pl330: bad write offset " TARGET_FMT_plx 1352 "\n", offset); 1353 break; 1354 } 1355 } 1356 1357 static inline uint32_t pl330_iomem_read_imp(void *opaque, 1358 hwaddr offset) 1359 { 1360 PL330State *s = (PL330State *)opaque; 1361 int chan_id; 1362 int i; 1363 uint32_t res; 1364 1365 if (offset >= PL330_REG_PERIPH_ID && offset < PL330_REG_PERIPH_ID + 32) { 1366 return pl330_id[(offset - PL330_REG_PERIPH_ID) >> 2]; 1367 } 1368 if (offset >= PL330_REG_CR0_BASE && offset < PL330_REG_CR0_BASE + 24) { 1369 return s->cfg[(offset - PL330_REG_CR0_BASE) >> 2]; 1370 } 1371 if (offset >= PL330_REG_CHANCTRL && offset < PL330_REG_DBGSTATUS) { 1372 offset -= PL330_REG_CHANCTRL; 1373 chan_id = offset >> 5; 1374 if (chan_id >= s->num_chnls) { 1375 qemu_log_mask(LOG_GUEST_ERROR, "pl330: bad read offset " 1376 TARGET_FMT_plx "\n", offset); 1377 return 0; 1378 } 1379 switch (offset & 0x1f) { 1380 case 0x00: 1381 return s->chan[chan_id].src; 1382 case 0x04: 1383 return s->chan[chan_id].dst; 1384 case 0x08: 1385 return s->chan[chan_id].control; 1386 case 0x0C: 1387 return s->chan[chan_id].lc[0]; 1388 case 0x10: 1389 return s->chan[chan_id].lc[1]; 1390 default: 1391 qemu_log_mask(LOG_GUEST_ERROR, "pl330: bad read offset " 1392 TARGET_FMT_plx "\n", offset); 1393 return 0; 1394 } 1395 } 1396 if (offset >= PL330_REG_CSR_BASE && offset < 0x400) { 1397 offset -= PL330_REG_CSR_BASE; 1398 chan_id = offset >> 3; 1399 if (chan_id >= s->num_chnls) { 1400 qemu_log_mask(LOG_GUEST_ERROR, "pl330: bad read offset " 1401 TARGET_FMT_plx "\n", offset); 1402 return 0; 1403 } 1404 switch ((offset >> 2) & 1) { 1405 case 0x0: 1406 res = (s->chan[chan_id].ns << 21) | 1407 (s->chan[chan_id].wakeup << 4) | 1408 (s->chan[chan_id].state) | 1409 (s->chan[chan_id].wfp_sbp << 14); 1410 return res; 1411 case 0x1: 1412 return s->chan[chan_id].pc; 1413 default: 1414 qemu_log_mask(LOG_GUEST_ERROR, "pl330: read error\n"); 1415 return 0; 1416 } 1417 } 1418 if (offset >= PL330_REG_FTR_BASE && offset < 0x100) { 1419 offset -= PL330_REG_FTR_BASE; 1420 chan_id = offset >> 2; 1421 if (chan_id >= s->num_chnls) { 1422 qemu_log_mask(LOG_GUEST_ERROR, "pl330: bad read offset " 1423 TARGET_FMT_plx "\n", offset); 1424 return 0; 1425 } 1426 return s->chan[chan_id].fault_type; 1427 } 1428 switch (offset) { 1429 case PL330_REG_DSR: 1430 return (s->manager.ns << 9) | (s->manager.wakeup << 4) | 1431 (s->manager.state & 0xf); 1432 case PL330_REG_DPC: 1433 return s->manager.pc; 1434 case PL330_REG_INTEN: 1435 return s->inten; 1436 case PL330_REG_INT_EVENT_RIS: 1437 return s->ev_status; 1438 case PL330_REG_INTMIS: 1439 return s->int_status; 1440 case PL330_REG_INTCLR: 1441 /* Documentation says that we can't read this register 1442 * but linux kernel does it 1443 */ 1444 return 0; 1445 case PL330_REG_FSRD: 1446 return s->manager.state ? 1 : 0; 1447 case PL330_REG_FSRC: 1448 res = 0; 1449 for (i = 0; i < s->num_chnls; i++) { 1450 if (s->chan[i].state == pl330_chan_fault || 1451 s->chan[i].state == pl330_chan_fault_completing) { 1452 res |= 1 << i; 1453 } 1454 } 1455 return res; 1456 case PL330_REG_FTRD: 1457 return s->manager.fault_type; 1458 case PL330_REG_DBGSTATUS: 1459 return s->debug_status; 1460 default: 1461 qemu_log_mask(LOG_GUEST_ERROR, "pl330: bad read offset " 1462 TARGET_FMT_plx "\n", offset); 1463 } 1464 return 0; 1465 } 1466 1467 static uint64_t pl330_iomem_read(void *opaque, hwaddr offset, 1468 unsigned size) 1469 { 1470 int ret = pl330_iomem_read_imp(opaque, offset); 1471 DB_PRINT("addr: %08x data: %08x\n", (unsigned)offset, ret); 1472 return ret; 1473 } 1474 1475 static const MemoryRegionOps pl330_ops = { 1476 .read = pl330_iomem_read, 1477 .write = pl330_iomem_write, 1478 .endianness = DEVICE_NATIVE_ENDIAN, 1479 .impl = { 1480 .min_access_size = 4, 1481 .max_access_size = 4, 1482 } 1483 }; 1484 1485 /* Controller logic and initialization */ 1486 1487 static void pl330_chan_reset(PL330Chan *ch) 1488 { 1489 ch->src = 0; 1490 ch->dst = 0; 1491 ch->pc = 0; 1492 ch->state = pl330_chan_stopped; 1493 ch->watchdog_timer = 0; 1494 ch->stall = 0; 1495 ch->control = 0; 1496 ch->status = 0; 1497 ch->fault_type = 0; 1498 } 1499 1500 static void pl330_reset(DeviceState *d) 1501 { 1502 int i; 1503 PL330State *s = PL330(d); 1504 1505 s->inten = 0; 1506 s->int_status = 0; 1507 s->ev_status = 0; 1508 s->debug_status = 0; 1509 s->num_faulting = 0; 1510 s->manager.ns = s->mgr_ns_at_rst; 1511 pl330_fifo_reset(&s->fifo); 1512 pl330_queue_reset(&s->read_queue); 1513 pl330_queue_reset(&s->write_queue); 1514 1515 for (i = 0; i < s->num_chnls; i++) { 1516 pl330_chan_reset(&s->chan[i]); 1517 } 1518 for (i = 0; i < s->num_periph_req; i++) { 1519 s->periph_busy[i] = 0; 1520 } 1521 1522 qemu_del_timer(s->timer); 1523 } 1524 1525 static void pl330_realize(DeviceState *dev, Error **errp) 1526 { 1527 int i; 1528 PL330State *s = PL330(dev); 1529 1530 sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq_abort); 1531 memory_region_init_io(&s->iomem, OBJECT(s), &pl330_ops, s, 1532 "dma", PL330_IOMEM_SIZE); 1533 sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem); 1534 1535 s->timer = qemu_new_timer_ns(vm_clock, pl330_exec_cycle_timer, s); 1536 1537 s->cfg[0] = (s->mgr_ns_at_rst ? 0x4 : 0) | 1538 (s->num_periph_req > 0 ? 1 : 0) | 1539 ((s->num_chnls - 1) & 0x7) << 4 | 1540 ((s->num_periph_req - 1) & 0x1f) << 12 | 1541 ((s->num_events - 1) & 0x1f) << 17; 1542 1543 switch (s->i_cache_len) { 1544 case (4): 1545 s->cfg[1] |= 2; 1546 break; 1547 case (8): 1548 s->cfg[1] |= 3; 1549 break; 1550 case (16): 1551 s->cfg[1] |= 4; 1552 break; 1553 case (32): 1554 s->cfg[1] |= 5; 1555 break; 1556 default: 1557 error_setg(errp, "Bad value for i-cache_len property: %d\n", 1558 s->i_cache_len); 1559 return; 1560 } 1561 s->cfg[1] |= ((s->num_i_cache_lines - 1) & 0xf) << 4; 1562 1563 s->chan = g_new0(PL330Chan, s->num_chnls); 1564 s->hi_seqn = g_new0(uint8_t, s->num_chnls); 1565 s->lo_seqn = g_new0(uint8_t, s->num_chnls); 1566 for (i = 0; i < s->num_chnls; i++) { 1567 s->chan[i].parent = s; 1568 s->chan[i].tag = (uint8_t)i; 1569 } 1570 s->manager.parent = s; 1571 s->manager.tag = s->num_chnls; 1572 s->manager.is_manager = true; 1573 1574 s->irq = g_new0(qemu_irq, s->num_events); 1575 for (i = 0; i < s->num_events; i++) { 1576 sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq[i]); 1577 } 1578 1579 qdev_init_gpio_in(dev, pl330_dma_stop_irq, PL330_PERIPH_NUM); 1580 1581 switch (s->data_width) { 1582 case (32): 1583 s->cfg[CFG_CRD] |= 0x2; 1584 break; 1585 case (64): 1586 s->cfg[CFG_CRD] |= 0x3; 1587 break; 1588 case (128): 1589 s->cfg[CFG_CRD] |= 0x4; 1590 break; 1591 default: 1592 error_setg(errp, "Bad value for data_width property: %d\n", 1593 s->data_width); 1594 return; 1595 } 1596 1597 s->cfg[CFG_CRD] |= ((s->wr_cap - 1) & 0x7) << 4 | 1598 ((s->wr_q_dep - 1) & 0xf) << 8 | 1599 ((s->rd_cap - 1) & 0x7) << 12 | 1600 ((s->rd_q_dep - 1) & 0xf) << 16 | 1601 ((s->data_buffer_dep - 1) & 0x1ff) << 20; 1602 1603 pl330_queue_init(&s->read_queue, s->rd_q_dep, s); 1604 pl330_queue_init(&s->write_queue, s->wr_q_dep, s); 1605 pl330_fifo_init(&s->fifo, s->data_buffer_dep); 1606 } 1607 1608 static Property pl330_properties[] = { 1609 /* CR0 */ 1610 DEFINE_PROP_UINT32("num_chnls", PL330State, num_chnls, 8), 1611 DEFINE_PROP_UINT8("num_periph_req", PL330State, num_periph_req, 4), 1612 DEFINE_PROP_UINT8("num_events", PL330State, num_events, 16), 1613 DEFINE_PROP_UINT8("mgr_ns_at_rst", PL330State, mgr_ns_at_rst, 0), 1614 /* CR1 */ 1615 DEFINE_PROP_UINT8("i-cache_len", PL330State, i_cache_len, 4), 1616 DEFINE_PROP_UINT8("num_i-cache_lines", PL330State, num_i_cache_lines, 8), 1617 /* CR2-4 */ 1618 DEFINE_PROP_UINT32("boot_addr", PL330State, cfg[CFG_BOOT_ADDR], 0), 1619 DEFINE_PROP_UINT32("INS", PL330State, cfg[CFG_INS], 0), 1620 DEFINE_PROP_UINT32("PNS", PL330State, cfg[CFG_PNS], 0), 1621 /* CRD */ 1622 DEFINE_PROP_UINT8("data_width", PL330State, data_width, 64), 1623 DEFINE_PROP_UINT8("wr_cap", PL330State, wr_cap, 8), 1624 DEFINE_PROP_UINT8("wr_q_dep", PL330State, wr_q_dep, 16), 1625 DEFINE_PROP_UINT8("rd_cap", PL330State, rd_cap, 8), 1626 DEFINE_PROP_UINT8("rd_q_dep", PL330State, rd_q_dep, 16), 1627 DEFINE_PROP_UINT16("data_buffer_dep", PL330State, data_buffer_dep, 256), 1628 1629 DEFINE_PROP_END_OF_LIST(), 1630 }; 1631 1632 static void pl330_class_init(ObjectClass *klass, void *data) 1633 { 1634 DeviceClass *dc = DEVICE_CLASS(klass); 1635 1636 dc->realize = pl330_realize; 1637 dc->reset = pl330_reset; 1638 dc->props = pl330_properties; 1639 dc->vmsd = &vmstate_pl330; 1640 } 1641 1642 static const TypeInfo pl330_type_info = { 1643 .name = TYPE_PL330, 1644 .parent = TYPE_SYS_BUS_DEVICE, 1645 .instance_size = sizeof(PL330State), 1646 .class_init = pl330_class_init, 1647 }; 1648 1649 static void pl330_register_types(void) 1650 { 1651 type_register_static(&pl330_type_info); 1652 } 1653 1654 type_init(pl330_register_types) 1655