1 /* 2 * ARM PrimeCell PL330 DMA Controller 3 * 4 * Copyright (c) 2009 Samsung Electronics. 5 * Contributed by Kirill Batuzov <batuzovk@ispras.ru> 6 * Copyright (c) 2012 Peter A.G. Crosthwaite (peter.crosthwaite@petalogix.com) 7 * Copyright (c) 2012 PetaLogix Pty Ltd. 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License 11 * as published by the Free Software Foundation; version 2 or later. 12 * 13 * You should have received a copy of the GNU General Public License along 14 * with this program; if not, see <http://www.gnu.org/licenses/>. 15 */ 16 17 #include "qemu/osdep.h" 18 #include "qemu-common.h" 19 #include "hw/sysbus.h" 20 #include "qapi/error.h" 21 #include "qemu/timer.h" 22 #include "sysemu/dma.h" 23 #include "qemu/log.h" 24 #include "qemu/module.h" 25 26 #ifndef PL330_ERR_DEBUG 27 #define PL330_ERR_DEBUG 0 28 #endif 29 30 #define DB_PRINT_L(lvl, fmt, args...) do {\ 31 if (PL330_ERR_DEBUG >= lvl) {\ 32 fprintf(stderr, "PL330: %s:" fmt, __func__, ## args);\ 33 } \ 34 } while (0) 35 36 #define DB_PRINT(fmt, args...) DB_PRINT_L(1, fmt, ## args) 37 38 #define PL330_PERIPH_NUM 32 39 #define PL330_MAX_BURST_LEN 128 40 #define PL330_INSN_MAXSIZE 6 41 42 #define PL330_FIFO_OK 0 43 #define PL330_FIFO_STALL 1 44 #define PL330_FIFO_ERR (-1) 45 46 #define PL330_FAULT_UNDEF_INSTR (1 << 0) 47 #define PL330_FAULT_OPERAND_INVALID (1 << 1) 48 #define PL330_FAULT_DMAGO_ERR (1 << 4) 49 #define PL330_FAULT_EVENT_ERR (1 << 5) 50 #define PL330_FAULT_CH_PERIPH_ERR (1 << 6) 51 #define PL330_FAULT_CH_RDWR_ERR (1 << 7) 52 #define PL330_FAULT_ST_DATA_UNAVAILABLE (1 << 12) 53 #define PL330_FAULT_FIFOEMPTY_ERR (1 << 13) 54 #define PL330_FAULT_INSTR_FETCH_ERR (1 << 16) 55 #define PL330_FAULT_DATA_WRITE_ERR (1 << 17) 56 #define PL330_FAULT_DATA_READ_ERR (1 << 18) 57 #define PL330_FAULT_DBG_INSTR (1 << 30) 58 #define PL330_FAULT_LOCKUP_ERR (1 << 31) 59 60 #define PL330_UNTAGGED 0xff 61 62 #define PL330_SINGLE 0x0 63 #define PL330_BURST 0x1 64 65 #define PL330_WATCHDOG_LIMIT 1024 66 67 /* IOMEM mapped registers */ 68 #define PL330_REG_DSR 0x000 69 #define PL330_REG_DPC 0x004 70 #define PL330_REG_INTEN 0x020 71 #define PL330_REG_INT_EVENT_RIS 0x024 72 #define PL330_REG_INTMIS 0x028 73 #define PL330_REG_INTCLR 0x02C 74 #define PL330_REG_FSRD 0x030 75 #define PL330_REG_FSRC 0x034 76 #define PL330_REG_FTRD 0x038 77 #define PL330_REG_FTR_BASE 0x040 78 #define PL330_REG_CSR_BASE 0x100 79 #define PL330_REG_CPC_BASE 0x104 80 #define PL330_REG_CHANCTRL 0x400 81 #define PL330_REG_DBGSTATUS 0xD00 82 #define PL330_REG_DBGCMD 0xD04 83 #define PL330_REG_DBGINST0 0xD08 84 #define PL330_REG_DBGINST1 0xD0C 85 #define PL330_REG_CR0_BASE 0xE00 86 #define PL330_REG_PERIPH_ID 0xFE0 87 88 #define PL330_IOMEM_SIZE 0x1000 89 90 #define CFG_BOOT_ADDR 2 91 #define CFG_INS 3 92 #define CFG_PNS 4 93 #define CFG_CRD 5 94 95 static const uint32_t pl330_id[] = { 96 0x30, 0x13, 0x24, 0x00, 0x0D, 0xF0, 0x05, 0xB1 97 }; 98 99 /* DMA channel states as they are described in PL330 Technical Reference Manual 100 * Most of them will not be used in emulation. 101 */ 102 typedef enum { 103 pl330_chan_stopped = 0, 104 pl330_chan_executing = 1, 105 pl330_chan_cache_miss = 2, 106 pl330_chan_updating_pc = 3, 107 pl330_chan_waiting_event = 4, 108 pl330_chan_at_barrier = 5, 109 pl330_chan_queue_busy = 6, 110 pl330_chan_waiting_periph = 7, 111 pl330_chan_killing = 8, 112 pl330_chan_completing = 9, 113 pl330_chan_fault_completing = 14, 114 pl330_chan_fault = 15, 115 } PL330ChanState; 116 117 typedef struct PL330State PL330State; 118 119 typedef struct PL330Chan { 120 uint32_t src; 121 uint32_t dst; 122 uint32_t pc; 123 uint32_t control; 124 uint32_t status; 125 uint32_t lc[2]; 126 uint32_t fault_type; 127 uint32_t watchdog_timer; 128 129 bool ns; 130 uint8_t request_flag; 131 uint8_t wakeup; 132 uint8_t wfp_sbp; 133 134 uint8_t state; 135 uint8_t stall; 136 137 bool is_manager; 138 PL330State *parent; 139 uint8_t tag; 140 } PL330Chan; 141 142 static const VMStateDescription vmstate_pl330_chan = { 143 .name = "pl330_chan", 144 .version_id = 1, 145 .minimum_version_id = 1, 146 .fields = (VMStateField[]) { 147 VMSTATE_UINT32(src, PL330Chan), 148 VMSTATE_UINT32(dst, PL330Chan), 149 VMSTATE_UINT32(pc, PL330Chan), 150 VMSTATE_UINT32(control, PL330Chan), 151 VMSTATE_UINT32(status, PL330Chan), 152 VMSTATE_UINT32_ARRAY(lc, PL330Chan, 2), 153 VMSTATE_UINT32(fault_type, PL330Chan), 154 VMSTATE_UINT32(watchdog_timer, PL330Chan), 155 VMSTATE_BOOL(ns, PL330Chan), 156 VMSTATE_UINT8(request_flag, PL330Chan), 157 VMSTATE_UINT8(wakeup, PL330Chan), 158 VMSTATE_UINT8(wfp_sbp, PL330Chan), 159 VMSTATE_UINT8(state, PL330Chan), 160 VMSTATE_UINT8(stall, PL330Chan), 161 VMSTATE_END_OF_LIST() 162 } 163 }; 164 165 typedef struct PL330Fifo { 166 uint8_t *buf; 167 uint8_t *tag; 168 uint32_t head; 169 uint32_t num; 170 uint32_t buf_size; 171 } PL330Fifo; 172 173 static const VMStateDescription vmstate_pl330_fifo = { 174 .name = "pl330_chan", 175 .version_id = 1, 176 .minimum_version_id = 1, 177 .fields = (VMStateField[]) { 178 VMSTATE_VBUFFER_UINT32(buf, PL330Fifo, 1, NULL, buf_size), 179 VMSTATE_VBUFFER_UINT32(tag, PL330Fifo, 1, NULL, buf_size), 180 VMSTATE_UINT32(head, PL330Fifo), 181 VMSTATE_UINT32(num, PL330Fifo), 182 VMSTATE_UINT32(buf_size, PL330Fifo), 183 VMSTATE_END_OF_LIST() 184 } 185 }; 186 187 typedef struct PL330QueueEntry { 188 uint32_t addr; 189 uint32_t len; 190 uint8_t n; 191 bool inc; 192 bool z; 193 uint8_t tag; 194 uint8_t seqn; 195 } PL330QueueEntry; 196 197 static const VMStateDescription vmstate_pl330_queue_entry = { 198 .name = "pl330_queue_entry", 199 .version_id = 1, 200 .minimum_version_id = 1, 201 .fields = (VMStateField[]) { 202 VMSTATE_UINT32(addr, PL330QueueEntry), 203 VMSTATE_UINT32(len, PL330QueueEntry), 204 VMSTATE_UINT8(n, PL330QueueEntry), 205 VMSTATE_BOOL(inc, PL330QueueEntry), 206 VMSTATE_BOOL(z, PL330QueueEntry), 207 VMSTATE_UINT8(tag, PL330QueueEntry), 208 VMSTATE_UINT8(seqn, PL330QueueEntry), 209 VMSTATE_END_OF_LIST() 210 } 211 }; 212 213 typedef struct PL330Queue { 214 PL330State *parent; 215 PL330QueueEntry *queue; 216 uint32_t queue_size; 217 } PL330Queue; 218 219 static const VMStateDescription vmstate_pl330_queue = { 220 .name = "pl330_queue", 221 .version_id = 1, 222 .minimum_version_id = 1, 223 .fields = (VMStateField[]) { 224 VMSTATE_STRUCT_VARRAY_UINT32(queue, PL330Queue, queue_size, 1, 225 vmstate_pl330_queue_entry, PL330QueueEntry), 226 VMSTATE_END_OF_LIST() 227 } 228 }; 229 230 struct PL330State { 231 SysBusDevice parent_obj; 232 233 MemoryRegion iomem; 234 qemu_irq irq_abort; 235 qemu_irq *irq; 236 237 /* Config registers. cfg[5] = CfgDn. */ 238 uint32_t cfg[6]; 239 #define EVENT_SEC_STATE 3 240 #define PERIPH_SEC_STATE 4 241 /* cfg 0 bits and pieces */ 242 uint32_t num_chnls; 243 uint8_t num_periph_req; 244 uint8_t num_events; 245 uint8_t mgr_ns_at_rst; 246 /* cfg 1 bits and pieces */ 247 uint8_t i_cache_len; 248 uint8_t num_i_cache_lines; 249 /* CRD bits and pieces */ 250 uint8_t data_width; 251 uint8_t wr_cap; 252 uint8_t wr_q_dep; 253 uint8_t rd_cap; 254 uint8_t rd_q_dep; 255 uint16_t data_buffer_dep; 256 257 PL330Chan manager; 258 PL330Chan *chan; 259 PL330Fifo fifo; 260 PL330Queue read_queue; 261 PL330Queue write_queue; 262 uint8_t *lo_seqn; 263 uint8_t *hi_seqn; 264 QEMUTimer *timer; /* is used for restore dma. */ 265 266 uint32_t inten; 267 uint32_t int_status; 268 uint32_t ev_status; 269 uint32_t dbg[2]; 270 uint8_t debug_status; 271 uint8_t num_faulting; 272 uint8_t periph_busy[PL330_PERIPH_NUM]; 273 274 }; 275 276 #define TYPE_PL330 "pl330" 277 #define PL330(obj) OBJECT_CHECK(PL330State, (obj), TYPE_PL330) 278 279 static const VMStateDescription vmstate_pl330 = { 280 .name = "pl330", 281 .version_id = 1, 282 .minimum_version_id = 1, 283 .fields = (VMStateField[]) { 284 VMSTATE_STRUCT(manager, PL330State, 0, vmstate_pl330_chan, PL330Chan), 285 VMSTATE_STRUCT_VARRAY_UINT32(chan, PL330State, num_chnls, 0, 286 vmstate_pl330_chan, PL330Chan), 287 VMSTATE_VBUFFER_UINT32(lo_seqn, PL330State, 1, NULL, num_chnls), 288 VMSTATE_VBUFFER_UINT32(hi_seqn, PL330State, 1, NULL, num_chnls), 289 VMSTATE_STRUCT(fifo, PL330State, 0, vmstate_pl330_fifo, PL330Fifo), 290 VMSTATE_STRUCT(read_queue, PL330State, 0, vmstate_pl330_queue, 291 PL330Queue), 292 VMSTATE_STRUCT(write_queue, PL330State, 0, vmstate_pl330_queue, 293 PL330Queue), 294 VMSTATE_TIMER_PTR(timer, PL330State), 295 VMSTATE_UINT32(inten, PL330State), 296 VMSTATE_UINT32(int_status, PL330State), 297 VMSTATE_UINT32(ev_status, PL330State), 298 VMSTATE_UINT32_ARRAY(dbg, PL330State, 2), 299 VMSTATE_UINT8(debug_status, PL330State), 300 VMSTATE_UINT8(num_faulting, PL330State), 301 VMSTATE_UINT8_ARRAY(periph_busy, PL330State, PL330_PERIPH_NUM), 302 VMSTATE_END_OF_LIST() 303 } 304 }; 305 306 typedef struct PL330InsnDesc { 307 /* OPCODE of the instruction */ 308 uint8_t opcode; 309 /* Mask so we can select several sibling instructions, such as 310 DMALD, DMALDS and DMALDB */ 311 uint8_t opmask; 312 /* Size of instruction in bytes */ 313 uint8_t size; 314 /* Interpreter */ 315 void (*exec)(PL330Chan *, uint8_t opcode, uint8_t *args, int len); 316 } PL330InsnDesc; 317 318 319 /* MFIFO Implementation 320 * 321 * MFIFO is implemented as a cyclic buffer of BUF_SIZE size. Tagged bytes are 322 * stored in this buffer. Data is stored in BUF field, tags - in the 323 * corresponding array elements of TAG field. 324 */ 325 326 /* Initialize queue. */ 327 328 static void pl330_fifo_init(PL330Fifo *s, uint32_t size) 329 { 330 s->buf = g_malloc0(size); 331 s->tag = g_malloc0(size); 332 s->buf_size = size; 333 } 334 335 /* Cyclic increment */ 336 337 static inline int pl330_fifo_inc(PL330Fifo *s, int x) 338 { 339 return (x + 1) % s->buf_size; 340 } 341 342 /* Number of empty bytes in MFIFO */ 343 344 static inline int pl330_fifo_num_free(PL330Fifo *s) 345 { 346 return s->buf_size - s->num; 347 } 348 349 /* Push LEN bytes of data stored in BUF to MFIFO and tag it with TAG. 350 * Zero returned on success, PL330_FIFO_STALL if there is no enough free 351 * space in MFIFO to store requested amount of data. If push was unsuccessful 352 * no data is stored to MFIFO. 353 */ 354 355 static int pl330_fifo_push(PL330Fifo *s, uint8_t *buf, int len, uint8_t tag) 356 { 357 int i; 358 359 if (s->buf_size - s->num < len) { 360 return PL330_FIFO_STALL; 361 } 362 for (i = 0; i < len; i++) { 363 int push_idx = (s->head + s->num + i) % s->buf_size; 364 s->buf[push_idx] = buf[i]; 365 s->tag[push_idx] = tag; 366 } 367 s->num += len; 368 return PL330_FIFO_OK; 369 } 370 371 /* Get LEN bytes of data from MFIFO and store it to BUF. Tag value of each 372 * byte is verified. Zero returned on success, PL330_FIFO_ERR on tag mismatch 373 * and PL330_FIFO_STALL if there is no enough data in MFIFO. If get was 374 * unsuccessful no data is removed from MFIFO. 375 */ 376 377 static int pl330_fifo_get(PL330Fifo *s, uint8_t *buf, int len, uint8_t tag) 378 { 379 int i; 380 381 if (s->num < len) { 382 return PL330_FIFO_STALL; 383 } 384 for (i = 0; i < len; i++) { 385 if (s->tag[s->head] == tag) { 386 int get_idx = (s->head + i) % s->buf_size; 387 buf[i] = s->buf[get_idx]; 388 } else { /* Tag mismatch - Rollback transaction */ 389 return PL330_FIFO_ERR; 390 } 391 } 392 s->head = (s->head + len) % s->buf_size; 393 s->num -= len; 394 return PL330_FIFO_OK; 395 } 396 397 /* Reset MFIFO. This completely erases all data in it. */ 398 399 static inline void pl330_fifo_reset(PL330Fifo *s) 400 { 401 s->head = 0; 402 s->num = 0; 403 } 404 405 /* Return tag of the first byte stored in MFIFO. If MFIFO is empty 406 * PL330_UNTAGGED is returned. 407 */ 408 409 static inline uint8_t pl330_fifo_tag(PL330Fifo *s) 410 { 411 return (!s->num) ? PL330_UNTAGGED : s->tag[s->head]; 412 } 413 414 /* Returns non-zero if tag TAG is present in fifo or zero otherwise */ 415 416 static int pl330_fifo_has_tag(PL330Fifo *s, uint8_t tag) 417 { 418 int i, n; 419 420 i = s->head; 421 for (n = 0; n < s->num; n++) { 422 if (s->tag[i] == tag) { 423 return 1; 424 } 425 i = pl330_fifo_inc(s, i); 426 } 427 return 0; 428 } 429 430 /* Remove all entry tagged with TAG from MFIFO */ 431 432 static void pl330_fifo_tagged_remove(PL330Fifo *s, uint8_t tag) 433 { 434 int i, t, n; 435 436 t = i = s->head; 437 for (n = 0; n < s->num; n++) { 438 if (s->tag[i] != tag) { 439 s->buf[t] = s->buf[i]; 440 s->tag[t] = s->tag[i]; 441 t = pl330_fifo_inc(s, t); 442 } else { 443 s->num = s->num - 1; 444 } 445 i = pl330_fifo_inc(s, i); 446 } 447 } 448 449 /* Read-Write Queue implementation 450 * 451 * A Read-Write Queue stores up to QUEUE_SIZE instructions (loads or stores). 452 * Each instruction is described by source (for loads) or destination (for 453 * stores) address ADDR, width of data to be loaded/stored LEN, number of 454 * stores/loads to be performed N, INC bit, Z bit and TAG to identify channel 455 * this instruction belongs to. Queue does not store any information about 456 * nature of the instruction: is it load or store. PL330 has different queues 457 * for loads and stores so this is already known at the top level where it 458 * matters. 459 * 460 * Queue works as FIFO for instructions with equivalent tags, but can issue 461 * instructions with different tags in arbitrary order. SEQN field attached to 462 * each instruction helps to achieve this. For each TAG queue contains 463 * instructions with consecutive SEQN values ranging from LO_SEQN[TAG] to 464 * HI_SEQN[TAG]-1 inclusive. SEQN is 8-bit unsigned integer, so SEQN=255 is 465 * followed by SEQN=0. 466 * 467 * Z bit indicates that zeroes should be stored. No MFIFO fetches are performed 468 * in this case. 469 */ 470 471 static void pl330_queue_reset(PL330Queue *s) 472 { 473 int i; 474 475 for (i = 0; i < s->queue_size; i++) { 476 s->queue[i].tag = PL330_UNTAGGED; 477 } 478 } 479 480 /* Initialize queue */ 481 static void pl330_queue_init(PL330Queue *s, int size, PL330State *parent) 482 { 483 s->parent = parent; 484 s->queue = g_new0(PL330QueueEntry, size); 485 s->queue_size = size; 486 } 487 488 /* Returns pointer to an empty slot or NULL if queue is full */ 489 static PL330QueueEntry *pl330_queue_find_empty(PL330Queue *s) 490 { 491 int i; 492 493 for (i = 0; i < s->queue_size; i++) { 494 if (s->queue[i].tag == PL330_UNTAGGED) { 495 return &s->queue[i]; 496 } 497 } 498 return NULL; 499 } 500 501 /* Put instruction in queue. 502 * Return value: 503 * - zero - OK 504 * - non-zero - queue is full 505 */ 506 507 static int pl330_queue_put_insn(PL330Queue *s, uint32_t addr, 508 int len, int n, bool inc, bool z, uint8_t tag) 509 { 510 PL330QueueEntry *entry = pl330_queue_find_empty(s); 511 512 if (!entry) { 513 return 1; 514 } 515 entry->tag = tag; 516 entry->addr = addr; 517 entry->len = len; 518 entry->n = n; 519 entry->z = z; 520 entry->inc = inc; 521 entry->seqn = s->parent->hi_seqn[tag]; 522 s->parent->hi_seqn[tag]++; 523 return 0; 524 } 525 526 /* Returns a pointer to queue slot containing instruction which satisfies 527 * following conditions: 528 * - it has valid tag value (not PL330_UNTAGGED) 529 * - if enforce_seq is set it has to be issuable without violating queue 530 * logic (see above) 531 * - if TAG argument is not PL330_UNTAGGED this instruction has tag value 532 * equivalent to the argument TAG value. 533 * If such instruction cannot be found NULL is returned. 534 */ 535 536 static PL330QueueEntry *pl330_queue_find_insn(PL330Queue *s, uint8_t tag, 537 bool enforce_seq) 538 { 539 int i; 540 541 for (i = 0; i < s->queue_size; i++) { 542 if (s->queue[i].tag != PL330_UNTAGGED) { 543 if ((!enforce_seq || 544 s->queue[i].seqn == s->parent->lo_seqn[s->queue[i].tag]) && 545 (s->queue[i].tag == tag || tag == PL330_UNTAGGED || 546 s->queue[i].z)) { 547 return &s->queue[i]; 548 } 549 } 550 } 551 return NULL; 552 } 553 554 /* Removes instruction from queue. */ 555 556 static inline void pl330_queue_remove_insn(PL330Queue *s, PL330QueueEntry *e) 557 { 558 s->parent->lo_seqn[e->tag]++; 559 e->tag = PL330_UNTAGGED; 560 } 561 562 /* Removes all instructions tagged with TAG from queue. */ 563 564 static inline void pl330_queue_remove_tagged(PL330Queue *s, uint8_t tag) 565 { 566 int i; 567 568 for (i = 0; i < s->queue_size; i++) { 569 if (s->queue[i].tag == tag) { 570 s->queue[i].tag = PL330_UNTAGGED; 571 } 572 } 573 } 574 575 /* DMA instruction execution engine */ 576 577 /* Moves DMA channel to the FAULT state and updates it's status. */ 578 579 static inline void pl330_fault(PL330Chan *ch, uint32_t flags) 580 { 581 DB_PRINT("ch: %p, flags: %" PRIx32 "\n", ch, flags); 582 ch->fault_type |= flags; 583 if (ch->state == pl330_chan_fault) { 584 return; 585 } 586 ch->state = pl330_chan_fault; 587 ch->parent->num_faulting++; 588 if (ch->parent->num_faulting == 1) { 589 DB_PRINT("abort interrupt raised\n"); 590 qemu_irq_raise(ch->parent->irq_abort); 591 } 592 } 593 594 /* 595 * For information about instructions see PL330 Technical Reference Manual. 596 * 597 * Arguments: 598 * CH - channel executing the instruction 599 * OPCODE - opcode 600 * ARGS - array of 8-bit arguments 601 * LEN - number of elements in ARGS array 602 */ 603 604 static void pl330_dmaadxh(PL330Chan *ch, uint8_t *args, bool ra, bool neg) 605 { 606 uint32_t im = (args[1] << 8) | args[0]; 607 if (neg) { 608 im |= 0xffffu << 16; 609 } 610 611 if (ch->is_manager) { 612 pl330_fault(ch, PL330_FAULT_UNDEF_INSTR); 613 return; 614 } 615 if (ra) { 616 ch->dst += im; 617 } else { 618 ch->src += im; 619 } 620 } 621 622 static void pl330_dmaaddh(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 623 { 624 pl330_dmaadxh(ch, args, extract32(opcode, 1, 1), false); 625 } 626 627 static void pl330_dmaadnh(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 628 { 629 pl330_dmaadxh(ch, args, extract32(opcode, 1, 1), true); 630 } 631 632 static void pl330_dmaend(PL330Chan *ch, uint8_t opcode, 633 uint8_t *args, int len) 634 { 635 PL330State *s = ch->parent; 636 637 if (ch->state == pl330_chan_executing && !ch->is_manager) { 638 /* Wait for all transfers to complete */ 639 if (pl330_fifo_has_tag(&s->fifo, ch->tag) || 640 pl330_queue_find_insn(&s->read_queue, ch->tag, false) != NULL || 641 pl330_queue_find_insn(&s->write_queue, ch->tag, false) != NULL) { 642 643 ch->stall = 1; 644 return; 645 } 646 } 647 DB_PRINT("DMA ending!\n"); 648 pl330_fifo_tagged_remove(&s->fifo, ch->tag); 649 pl330_queue_remove_tagged(&s->read_queue, ch->tag); 650 pl330_queue_remove_tagged(&s->write_queue, ch->tag); 651 ch->state = pl330_chan_stopped; 652 } 653 654 static void pl330_dmaflushp(PL330Chan *ch, uint8_t opcode, 655 uint8_t *args, int len) 656 { 657 uint8_t periph_id; 658 659 if (args[0] & 7) { 660 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 661 return; 662 } 663 periph_id = (args[0] >> 3) & 0x1f; 664 if (periph_id >= ch->parent->num_periph_req) { 665 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 666 return; 667 } 668 if (ch->ns && !(ch->parent->cfg[CFG_PNS] & (1 << periph_id))) { 669 pl330_fault(ch, PL330_FAULT_CH_PERIPH_ERR); 670 return; 671 } 672 /* Do nothing */ 673 } 674 675 static void pl330_dmago(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 676 { 677 uint8_t chan_id; 678 uint8_t ns; 679 uint32_t pc; 680 PL330Chan *s; 681 682 DB_PRINT("\n"); 683 684 if (!ch->is_manager) { 685 pl330_fault(ch, PL330_FAULT_UNDEF_INSTR); 686 return; 687 } 688 ns = !!(opcode & 2); 689 chan_id = args[0] & 7; 690 if ((args[0] >> 3)) { 691 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 692 return; 693 } 694 if (chan_id >= ch->parent->num_chnls) { 695 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 696 return; 697 } 698 pc = (((uint32_t)args[4]) << 24) | (((uint32_t)args[3]) << 16) | 699 (((uint32_t)args[2]) << 8) | (((uint32_t)args[1])); 700 if (ch->parent->chan[chan_id].state != pl330_chan_stopped) { 701 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 702 return; 703 } 704 if (ch->ns && !ns) { 705 pl330_fault(ch, PL330_FAULT_DMAGO_ERR); 706 return; 707 } 708 s = &ch->parent->chan[chan_id]; 709 s->ns = ns; 710 s->pc = pc; 711 s->state = pl330_chan_executing; 712 } 713 714 static void pl330_dmald(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 715 { 716 uint8_t bs = opcode & 3; 717 uint32_t size, num; 718 bool inc; 719 720 if (bs == 2) { 721 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 722 return; 723 } 724 if ((bs == 1 && ch->request_flag == PL330_BURST) || 725 (bs == 3 && ch->request_flag == PL330_SINGLE)) { 726 /* Perform NOP */ 727 return; 728 } 729 if (bs == 1 && ch->request_flag == PL330_SINGLE) { 730 num = 1; 731 } else { 732 num = ((ch->control >> 4) & 0xf) + 1; 733 } 734 size = (uint32_t)1 << ((ch->control >> 1) & 0x7); 735 inc = !!(ch->control & 1); 736 ch->stall = pl330_queue_put_insn(&ch->parent->read_queue, ch->src, 737 size, num, inc, 0, ch->tag); 738 if (!ch->stall) { 739 DB_PRINT("channel:%" PRId8 " address:%08" PRIx32 " size:%" PRIx32 740 " num:%" PRId32 " %c\n", 741 ch->tag, ch->src, size, num, inc ? 'Y' : 'N'); 742 ch->src += inc ? size * num - (ch->src & (size - 1)) : 0; 743 } 744 } 745 746 static void pl330_dmaldp(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 747 { 748 uint8_t periph_id; 749 750 if (args[0] & 7) { 751 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 752 return; 753 } 754 periph_id = (args[0] >> 3) & 0x1f; 755 if (periph_id >= ch->parent->num_periph_req) { 756 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 757 return; 758 } 759 if (ch->ns && !(ch->parent->cfg[CFG_PNS] & (1 << periph_id))) { 760 pl330_fault(ch, PL330_FAULT_CH_PERIPH_ERR); 761 return; 762 } 763 pl330_dmald(ch, opcode, args, len); 764 } 765 766 static void pl330_dmalp(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 767 { 768 uint8_t lc = (opcode & 2) >> 1; 769 770 ch->lc[lc] = args[0]; 771 } 772 773 static void pl330_dmakill(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 774 { 775 if (ch->state == pl330_chan_fault || 776 ch->state == pl330_chan_fault_completing) { 777 /* This is the only way for a channel to leave the faulting state */ 778 ch->fault_type = 0; 779 ch->parent->num_faulting--; 780 if (ch->parent->num_faulting == 0) { 781 DB_PRINT("abort interrupt lowered\n"); 782 qemu_irq_lower(ch->parent->irq_abort); 783 } 784 } 785 ch->state = pl330_chan_killing; 786 pl330_fifo_tagged_remove(&ch->parent->fifo, ch->tag); 787 pl330_queue_remove_tagged(&ch->parent->read_queue, ch->tag); 788 pl330_queue_remove_tagged(&ch->parent->write_queue, ch->tag); 789 ch->state = pl330_chan_stopped; 790 } 791 792 static void pl330_dmalpend(PL330Chan *ch, uint8_t opcode, 793 uint8_t *args, int len) 794 { 795 uint8_t nf = (opcode & 0x10) >> 4; 796 uint8_t bs = opcode & 3; 797 uint8_t lc = (opcode & 4) >> 2; 798 799 if (bs == 2) { 800 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 801 return; 802 } 803 if ((bs == 1 && ch->request_flag == PL330_BURST) || 804 (bs == 3 && ch->request_flag == PL330_SINGLE)) { 805 /* Perform NOP */ 806 return; 807 } 808 if (!nf || ch->lc[lc]) { 809 if (nf) { 810 ch->lc[lc]--; 811 } 812 DB_PRINT("loop reiteration\n"); 813 ch->pc -= args[0]; 814 ch->pc -= len + 1; 815 /* "ch->pc -= args[0] + len + 1" is incorrect when args[0] == 256 */ 816 } else { 817 DB_PRINT("loop fallthrough\n"); 818 } 819 } 820 821 822 static void pl330_dmamov(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 823 { 824 uint8_t rd = args[0] & 7; 825 uint32_t im; 826 827 if ((args[0] >> 3)) { 828 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 829 return; 830 } 831 im = (((uint32_t)args[4]) << 24) | (((uint32_t)args[3]) << 16) | 832 (((uint32_t)args[2]) << 8) | (((uint32_t)args[1])); 833 switch (rd) { 834 case 0: 835 ch->src = im; 836 break; 837 case 1: 838 ch->control = im; 839 break; 840 case 2: 841 ch->dst = im; 842 break; 843 default: 844 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 845 return; 846 } 847 } 848 849 static void pl330_dmanop(PL330Chan *ch, uint8_t opcode, 850 uint8_t *args, int len) 851 { 852 /* NOP is NOP. */ 853 } 854 855 static void pl330_dmarmb(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 856 { 857 if (pl330_queue_find_insn(&ch->parent->read_queue, ch->tag, false)) { 858 ch->state = pl330_chan_at_barrier; 859 ch->stall = 1; 860 return; 861 } else { 862 ch->state = pl330_chan_executing; 863 } 864 } 865 866 static void pl330_dmasev(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 867 { 868 uint8_t ev_id; 869 870 if (args[0] & 7) { 871 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 872 return; 873 } 874 ev_id = (args[0] >> 3) & 0x1f; 875 if (ev_id >= ch->parent->num_events) { 876 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 877 return; 878 } 879 if (ch->ns && !(ch->parent->cfg[CFG_INS] & (1 << ev_id))) { 880 pl330_fault(ch, PL330_FAULT_EVENT_ERR); 881 return; 882 } 883 if (ch->parent->inten & (1 << ev_id)) { 884 ch->parent->int_status |= (1 << ev_id); 885 DB_PRINT("event interrupt raised %" PRId8 "\n", ev_id); 886 qemu_irq_raise(ch->parent->irq[ev_id]); 887 } 888 DB_PRINT("event raised %" PRId8 "\n", ev_id); 889 ch->parent->ev_status |= (1 << ev_id); 890 } 891 892 static void pl330_dmast(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len) 893 { 894 uint8_t bs = opcode & 3; 895 uint32_t size, num; 896 bool inc; 897 898 if (bs == 2) { 899 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 900 return; 901 } 902 if ((bs == 1 && ch->request_flag == PL330_BURST) || 903 (bs == 3 && ch->request_flag == PL330_SINGLE)) { 904 /* Perform NOP */ 905 return; 906 } 907 num = ((ch->control >> 18) & 0xf) + 1; 908 size = (uint32_t)1 << ((ch->control >> 15) & 0x7); 909 inc = !!((ch->control >> 14) & 1); 910 ch->stall = pl330_queue_put_insn(&ch->parent->write_queue, ch->dst, 911 size, num, inc, 0, ch->tag); 912 if (!ch->stall) { 913 DB_PRINT("channel:%" PRId8 " address:%08" PRIx32 " size:%" PRIx32 914 " num:%" PRId32 " %c\n", 915 ch->tag, ch->dst, size, num, inc ? 'Y' : 'N'); 916 ch->dst += inc ? size * num - (ch->dst & (size - 1)) : 0; 917 } 918 } 919 920 static void pl330_dmastp(PL330Chan *ch, uint8_t opcode, 921 uint8_t *args, int len) 922 { 923 uint8_t periph_id; 924 925 if (args[0] & 7) { 926 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 927 return; 928 } 929 periph_id = (args[0] >> 3) & 0x1f; 930 if (periph_id >= ch->parent->num_periph_req) { 931 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 932 return; 933 } 934 if (ch->ns && !(ch->parent->cfg[CFG_PNS] & (1 << periph_id))) { 935 pl330_fault(ch, PL330_FAULT_CH_PERIPH_ERR); 936 return; 937 } 938 pl330_dmast(ch, opcode, args, len); 939 } 940 941 static void pl330_dmastz(PL330Chan *ch, uint8_t opcode, 942 uint8_t *args, int len) 943 { 944 uint32_t size, num; 945 bool inc; 946 947 num = ((ch->control >> 18) & 0xf) + 1; 948 size = (uint32_t)1 << ((ch->control >> 15) & 0x7); 949 inc = !!((ch->control >> 14) & 1); 950 ch->stall = pl330_queue_put_insn(&ch->parent->write_queue, ch->dst, 951 size, num, inc, 1, ch->tag); 952 if (inc) { 953 ch->dst += size * num; 954 } 955 } 956 957 static void pl330_dmawfe(PL330Chan *ch, uint8_t opcode, 958 uint8_t *args, int len) 959 { 960 uint8_t ev_id; 961 int i; 962 963 if (args[0] & 5) { 964 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 965 return; 966 } 967 ev_id = (args[0] >> 3) & 0x1f; 968 if (ev_id >= ch->parent->num_events) { 969 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 970 return; 971 } 972 if (ch->ns && !(ch->parent->cfg[CFG_INS] & (1 << ev_id))) { 973 pl330_fault(ch, PL330_FAULT_EVENT_ERR); 974 return; 975 } 976 ch->wakeup = ev_id; 977 ch->state = pl330_chan_waiting_event; 978 if (~ch->parent->inten & ch->parent->ev_status & 1 << ev_id) { 979 ch->state = pl330_chan_executing; 980 /* If anyone else is currently waiting on the same event, let them 981 * clear the ev_status so they pick up event as well 982 */ 983 for (i = 0; i < ch->parent->num_chnls; ++i) { 984 PL330Chan *peer = &ch->parent->chan[i]; 985 if (peer->state == pl330_chan_waiting_event && 986 peer->wakeup == ev_id) { 987 return; 988 } 989 } 990 ch->parent->ev_status &= ~(1 << ev_id); 991 DB_PRINT("event lowered %" PRIx8 "\n", ev_id); 992 } else { 993 ch->stall = 1; 994 } 995 } 996 997 static void pl330_dmawfp(PL330Chan *ch, uint8_t opcode, 998 uint8_t *args, int len) 999 { 1000 uint8_t bs = opcode & 3; 1001 uint8_t periph_id; 1002 1003 if (args[0] & 7) { 1004 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 1005 return; 1006 } 1007 periph_id = (args[0] >> 3) & 0x1f; 1008 if (periph_id >= ch->parent->num_periph_req) { 1009 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 1010 return; 1011 } 1012 if (ch->ns && !(ch->parent->cfg[CFG_PNS] & (1 << periph_id))) { 1013 pl330_fault(ch, PL330_FAULT_CH_PERIPH_ERR); 1014 return; 1015 } 1016 switch (bs) { 1017 case 0: /* S */ 1018 ch->request_flag = PL330_SINGLE; 1019 ch->wfp_sbp = 0; 1020 break; 1021 case 1: /* P */ 1022 ch->request_flag = PL330_BURST; 1023 ch->wfp_sbp = 2; 1024 break; 1025 case 2: /* B */ 1026 ch->request_flag = PL330_BURST; 1027 ch->wfp_sbp = 1; 1028 break; 1029 default: 1030 pl330_fault(ch, PL330_FAULT_OPERAND_INVALID); 1031 return; 1032 } 1033 1034 if (ch->parent->periph_busy[periph_id]) { 1035 ch->state = pl330_chan_waiting_periph; 1036 ch->stall = 1; 1037 } else if (ch->state == pl330_chan_waiting_periph) { 1038 ch->state = pl330_chan_executing; 1039 } 1040 } 1041 1042 static void pl330_dmawmb(PL330Chan *ch, uint8_t opcode, 1043 uint8_t *args, int len) 1044 { 1045 if (pl330_queue_find_insn(&ch->parent->write_queue, ch->tag, false)) { 1046 ch->state = pl330_chan_at_barrier; 1047 ch->stall = 1; 1048 return; 1049 } else { 1050 ch->state = pl330_chan_executing; 1051 } 1052 } 1053 1054 /* NULL terminated array of the instruction descriptions. */ 1055 static const PL330InsnDesc insn_desc[] = { 1056 { .opcode = 0x54, .opmask = 0xFD, .size = 3, .exec = pl330_dmaaddh, }, 1057 { .opcode = 0x5c, .opmask = 0xFD, .size = 3, .exec = pl330_dmaadnh, }, 1058 { .opcode = 0x00, .opmask = 0xFF, .size = 1, .exec = pl330_dmaend, }, 1059 { .opcode = 0x35, .opmask = 0xFF, .size = 2, .exec = pl330_dmaflushp, }, 1060 { .opcode = 0xA0, .opmask = 0xFD, .size = 6, .exec = pl330_dmago, }, 1061 { .opcode = 0x04, .opmask = 0xFC, .size = 1, .exec = pl330_dmald, }, 1062 { .opcode = 0x25, .opmask = 0xFD, .size = 2, .exec = pl330_dmaldp, }, 1063 { .opcode = 0x20, .opmask = 0xFD, .size = 2, .exec = pl330_dmalp, }, 1064 /* dmastp must be before dmalpend in this list, because their maps 1065 * are overlapping 1066 */ 1067 { .opcode = 0x29, .opmask = 0xFD, .size = 2, .exec = pl330_dmastp, }, 1068 { .opcode = 0x28, .opmask = 0xE8, .size = 2, .exec = pl330_dmalpend, }, 1069 { .opcode = 0x01, .opmask = 0xFF, .size = 1, .exec = pl330_dmakill, }, 1070 { .opcode = 0xBC, .opmask = 0xFF, .size = 6, .exec = pl330_dmamov, }, 1071 { .opcode = 0x18, .opmask = 0xFF, .size = 1, .exec = pl330_dmanop, }, 1072 { .opcode = 0x12, .opmask = 0xFF, .size = 1, .exec = pl330_dmarmb, }, 1073 { .opcode = 0x34, .opmask = 0xFF, .size = 2, .exec = pl330_dmasev, }, 1074 { .opcode = 0x08, .opmask = 0xFC, .size = 1, .exec = pl330_dmast, }, 1075 { .opcode = 0x0C, .opmask = 0xFF, .size = 1, .exec = pl330_dmastz, }, 1076 { .opcode = 0x36, .opmask = 0xFF, .size = 2, .exec = pl330_dmawfe, }, 1077 { .opcode = 0x30, .opmask = 0xFC, .size = 2, .exec = pl330_dmawfp, }, 1078 { .opcode = 0x13, .opmask = 0xFF, .size = 1, .exec = pl330_dmawmb, }, 1079 { .opcode = 0x00, .opmask = 0x00, .size = 0, .exec = NULL, } 1080 }; 1081 1082 /* Instructions which can be issued via debug registers. */ 1083 static const PL330InsnDesc debug_insn_desc[] = { 1084 { .opcode = 0xA0, .opmask = 0xFD, .size = 6, .exec = pl330_dmago, }, 1085 { .opcode = 0x01, .opmask = 0xFF, .size = 1, .exec = pl330_dmakill, }, 1086 { .opcode = 0x34, .opmask = 0xFF, .size = 2, .exec = pl330_dmasev, }, 1087 { .opcode = 0x00, .opmask = 0x00, .size = 0, .exec = NULL, } 1088 }; 1089 1090 static inline const PL330InsnDesc *pl330_fetch_insn(PL330Chan *ch) 1091 { 1092 uint8_t opcode; 1093 int i; 1094 1095 dma_memory_read(&address_space_memory, ch->pc, &opcode, 1); 1096 for (i = 0; insn_desc[i].size; i++) { 1097 if ((opcode & insn_desc[i].opmask) == insn_desc[i].opcode) { 1098 return &insn_desc[i]; 1099 } 1100 } 1101 return NULL; 1102 } 1103 1104 static inline void pl330_exec_insn(PL330Chan *ch, const PL330InsnDesc *insn) 1105 { 1106 uint8_t buf[PL330_INSN_MAXSIZE]; 1107 1108 assert(insn->size <= PL330_INSN_MAXSIZE); 1109 dma_memory_read(&address_space_memory, ch->pc, buf, insn->size); 1110 insn->exec(ch, buf[0], &buf[1], insn->size - 1); 1111 } 1112 1113 static inline void pl330_update_pc(PL330Chan *ch, 1114 const PL330InsnDesc *insn) 1115 { 1116 ch->pc += insn->size; 1117 } 1118 1119 /* Try to execute current instruction in channel CH. Number of executed 1120 instructions is returned (0 or 1). */ 1121 static int pl330_chan_exec(PL330Chan *ch) 1122 { 1123 const PL330InsnDesc *insn; 1124 1125 if (ch->state != pl330_chan_executing && 1126 ch->state != pl330_chan_waiting_periph && 1127 ch->state != pl330_chan_at_barrier && 1128 ch->state != pl330_chan_waiting_event) { 1129 return 0; 1130 } 1131 ch->stall = 0; 1132 insn = pl330_fetch_insn(ch); 1133 if (!insn) { 1134 DB_PRINT("pl330 undefined instruction\n"); 1135 pl330_fault(ch, PL330_FAULT_UNDEF_INSTR); 1136 return 0; 1137 } 1138 pl330_exec_insn(ch, insn); 1139 if (!ch->stall) { 1140 pl330_update_pc(ch, insn); 1141 ch->watchdog_timer = 0; 1142 return 1; 1143 /* WDT only active in exec state */ 1144 } else if (ch->state == pl330_chan_executing) { 1145 ch->watchdog_timer++; 1146 if (ch->watchdog_timer >= PL330_WATCHDOG_LIMIT) { 1147 pl330_fault(ch, PL330_FAULT_LOCKUP_ERR); 1148 } 1149 } 1150 return 0; 1151 } 1152 1153 /* Try to execute 1 instruction in each channel, one instruction from read 1154 queue and one instruction from write queue. Number of successfully executed 1155 instructions is returned. */ 1156 static int pl330_exec_cycle(PL330Chan *channel) 1157 { 1158 PL330State *s = channel->parent; 1159 PL330QueueEntry *q; 1160 int i; 1161 int num_exec = 0; 1162 int fifo_res = 0; 1163 uint8_t buf[PL330_MAX_BURST_LEN]; 1164 1165 /* Execute one instruction in each channel */ 1166 num_exec += pl330_chan_exec(channel); 1167 1168 /* Execute one instruction from read queue */ 1169 q = pl330_queue_find_insn(&s->read_queue, PL330_UNTAGGED, true); 1170 if (q != NULL && q->len <= pl330_fifo_num_free(&s->fifo)) { 1171 int len = q->len - (q->addr & (q->len - 1)); 1172 1173 dma_memory_read(&address_space_memory, q->addr, buf, len); 1174 if (PL330_ERR_DEBUG > 1) { 1175 DB_PRINT("PL330 read from memory @%08" PRIx32 " (size = %08x):\n", 1176 q->addr, len); 1177 qemu_hexdump((char *)buf, stderr, "", len); 1178 } 1179 fifo_res = pl330_fifo_push(&s->fifo, buf, len, q->tag); 1180 if (fifo_res == PL330_FIFO_OK) { 1181 if (q->inc) { 1182 q->addr += len; 1183 } 1184 q->n--; 1185 if (!q->n) { 1186 pl330_queue_remove_insn(&s->read_queue, q); 1187 } 1188 num_exec++; 1189 } 1190 } 1191 1192 /* Execute one instruction from write queue. */ 1193 q = pl330_queue_find_insn(&s->write_queue, pl330_fifo_tag(&s->fifo), true); 1194 if (q != NULL) { 1195 int len = q->len - (q->addr & (q->len - 1)); 1196 1197 if (q->z) { 1198 for (i = 0; i < len; i++) { 1199 buf[i] = 0; 1200 } 1201 } else { 1202 fifo_res = pl330_fifo_get(&s->fifo, buf, len, q->tag); 1203 } 1204 if (fifo_res == PL330_FIFO_OK || q->z) { 1205 dma_memory_write(&address_space_memory, q->addr, buf, len); 1206 if (PL330_ERR_DEBUG > 1) { 1207 DB_PRINT("PL330 read from memory @%08" PRIx32 1208 " (size = %08x):\n", q->addr, len); 1209 qemu_hexdump((char *)buf, stderr, "", len); 1210 } 1211 if (q->inc) { 1212 q->addr += len; 1213 } 1214 num_exec++; 1215 } else if (fifo_res == PL330_FIFO_STALL) { 1216 pl330_fault(&channel->parent->chan[q->tag], 1217 PL330_FAULT_FIFOEMPTY_ERR); 1218 } 1219 q->n--; 1220 if (!q->n) { 1221 pl330_queue_remove_insn(&s->write_queue, q); 1222 } 1223 } 1224 1225 return num_exec; 1226 } 1227 1228 static int pl330_exec_channel(PL330Chan *channel) 1229 { 1230 int insr_exec = 0; 1231 1232 /* TODO: Is it all right to execute everything or should we do per-cycle 1233 simulation? */ 1234 while (pl330_exec_cycle(channel)) { 1235 insr_exec++; 1236 } 1237 1238 /* Detect deadlock */ 1239 if (channel->state == pl330_chan_executing) { 1240 pl330_fault(channel, PL330_FAULT_LOCKUP_ERR); 1241 } 1242 /* Situation when one of the queues has deadlocked but all channels 1243 * have finished their programs should be impossible. 1244 */ 1245 1246 return insr_exec; 1247 } 1248 1249 static inline void pl330_exec(PL330State *s) 1250 { 1251 DB_PRINT("\n"); 1252 int i, insr_exec; 1253 do { 1254 insr_exec = pl330_exec_channel(&s->manager); 1255 1256 for (i = 0; i < s->num_chnls; i++) { 1257 insr_exec += pl330_exec_channel(&s->chan[i]); 1258 } 1259 } while (insr_exec); 1260 } 1261 1262 static void pl330_exec_cycle_timer(void *opaque) 1263 { 1264 PL330State *s = (PL330State *)opaque; 1265 pl330_exec(s); 1266 } 1267 1268 /* Stop or restore dma operations */ 1269 1270 static void pl330_dma_stop_irq(void *opaque, int irq, int level) 1271 { 1272 PL330State *s = (PL330State *)opaque; 1273 1274 if (s->periph_busy[irq] != level) { 1275 s->periph_busy[irq] = level; 1276 timer_mod(s->timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL)); 1277 } 1278 } 1279 1280 static void pl330_debug_exec(PL330State *s) 1281 { 1282 uint8_t args[5]; 1283 uint8_t opcode; 1284 uint8_t chan_id; 1285 int i; 1286 PL330Chan *ch; 1287 const PL330InsnDesc *insn; 1288 1289 s->debug_status = 1; 1290 chan_id = (s->dbg[0] >> 8) & 0x07; 1291 opcode = (s->dbg[0] >> 16) & 0xff; 1292 args[0] = (s->dbg[0] >> 24) & 0xff; 1293 args[1] = (s->dbg[1] >> 0) & 0xff; 1294 args[2] = (s->dbg[1] >> 8) & 0xff; 1295 args[3] = (s->dbg[1] >> 16) & 0xff; 1296 args[4] = (s->dbg[1] >> 24) & 0xff; 1297 DB_PRINT("chan id: %" PRIx8 "\n", chan_id); 1298 if (s->dbg[0] & 1) { 1299 ch = &s->chan[chan_id]; 1300 } else { 1301 ch = &s->manager; 1302 } 1303 insn = NULL; 1304 for (i = 0; debug_insn_desc[i].size; i++) { 1305 if ((opcode & debug_insn_desc[i].opmask) == debug_insn_desc[i].opcode) { 1306 insn = &debug_insn_desc[i]; 1307 } 1308 } 1309 if (!insn) { 1310 pl330_fault(ch, PL330_FAULT_UNDEF_INSTR | PL330_FAULT_DBG_INSTR); 1311 return ; 1312 } 1313 ch->stall = 0; 1314 insn->exec(ch, opcode, args, insn->size - 1); 1315 if (ch->fault_type) { 1316 ch->fault_type |= PL330_FAULT_DBG_INSTR; 1317 } 1318 if (ch->stall) { 1319 qemu_log_mask(LOG_UNIMP, "pl330: stall of debug instruction not " 1320 "implemented\n"); 1321 } 1322 s->debug_status = 0; 1323 } 1324 1325 /* IOMEM mapped registers */ 1326 1327 static void pl330_iomem_write(void *opaque, hwaddr offset, 1328 uint64_t value, unsigned size) 1329 { 1330 PL330State *s = (PL330State *) opaque; 1331 int i; 1332 1333 DB_PRINT("addr: %08x data: %08x\n", (unsigned)offset, (unsigned)value); 1334 1335 switch (offset) { 1336 case PL330_REG_INTEN: 1337 s->inten = value; 1338 break; 1339 case PL330_REG_INTCLR: 1340 for (i = 0; i < s->num_events; i++) { 1341 if (s->int_status & s->inten & value & (1 << i)) { 1342 DB_PRINT("event interrupt lowered %d\n", i); 1343 qemu_irq_lower(s->irq[i]); 1344 } 1345 } 1346 s->ev_status &= ~(value & s->inten); 1347 s->int_status &= ~(value & s->inten); 1348 break; 1349 case PL330_REG_DBGCMD: 1350 if ((value & 3) == 0) { 1351 pl330_debug_exec(s); 1352 pl330_exec(s); 1353 } else { 1354 qemu_log_mask(LOG_GUEST_ERROR, "pl330: write of illegal value %u " 1355 "for offset " TARGET_FMT_plx "\n", (unsigned)value, 1356 offset); 1357 } 1358 break; 1359 case PL330_REG_DBGINST0: 1360 DB_PRINT("s->dbg[0] = %08x\n", (unsigned)value); 1361 s->dbg[0] = value; 1362 break; 1363 case PL330_REG_DBGINST1: 1364 DB_PRINT("s->dbg[1] = %08x\n", (unsigned)value); 1365 s->dbg[1] = value; 1366 break; 1367 default: 1368 qemu_log_mask(LOG_GUEST_ERROR, "pl330: bad write offset " TARGET_FMT_plx 1369 "\n", offset); 1370 break; 1371 } 1372 } 1373 1374 static inline uint32_t pl330_iomem_read_imp(void *opaque, 1375 hwaddr offset) 1376 { 1377 PL330State *s = (PL330State *)opaque; 1378 int chan_id; 1379 int i; 1380 uint32_t res; 1381 1382 if (offset >= PL330_REG_PERIPH_ID && offset < PL330_REG_PERIPH_ID + 32) { 1383 return pl330_id[(offset - PL330_REG_PERIPH_ID) >> 2]; 1384 } 1385 if (offset >= PL330_REG_CR0_BASE && offset < PL330_REG_CR0_BASE + 24) { 1386 return s->cfg[(offset - PL330_REG_CR0_BASE) >> 2]; 1387 } 1388 if (offset >= PL330_REG_CHANCTRL && offset < PL330_REG_DBGSTATUS) { 1389 offset -= PL330_REG_CHANCTRL; 1390 chan_id = offset >> 5; 1391 if (chan_id >= s->num_chnls) { 1392 qemu_log_mask(LOG_GUEST_ERROR, "pl330: bad read offset " 1393 TARGET_FMT_plx "\n", offset); 1394 return 0; 1395 } 1396 switch (offset & 0x1f) { 1397 case 0x00: 1398 return s->chan[chan_id].src; 1399 case 0x04: 1400 return s->chan[chan_id].dst; 1401 case 0x08: 1402 return s->chan[chan_id].control; 1403 case 0x0C: 1404 return s->chan[chan_id].lc[0]; 1405 case 0x10: 1406 return s->chan[chan_id].lc[1]; 1407 default: 1408 qemu_log_mask(LOG_GUEST_ERROR, "pl330: bad read offset " 1409 TARGET_FMT_plx "\n", offset); 1410 return 0; 1411 } 1412 } 1413 if (offset >= PL330_REG_CSR_BASE && offset < 0x400) { 1414 offset -= PL330_REG_CSR_BASE; 1415 chan_id = offset >> 3; 1416 if (chan_id >= s->num_chnls) { 1417 qemu_log_mask(LOG_GUEST_ERROR, "pl330: bad read offset " 1418 TARGET_FMT_plx "\n", offset); 1419 return 0; 1420 } 1421 switch ((offset >> 2) & 1) { 1422 case 0x0: 1423 res = (s->chan[chan_id].ns << 21) | 1424 (s->chan[chan_id].wakeup << 4) | 1425 (s->chan[chan_id].state) | 1426 (s->chan[chan_id].wfp_sbp << 14); 1427 return res; 1428 case 0x1: 1429 return s->chan[chan_id].pc; 1430 default: 1431 qemu_log_mask(LOG_GUEST_ERROR, "pl330: read error\n"); 1432 return 0; 1433 } 1434 } 1435 if (offset >= PL330_REG_FTR_BASE && offset < 0x100) { 1436 offset -= PL330_REG_FTR_BASE; 1437 chan_id = offset >> 2; 1438 if (chan_id >= s->num_chnls) { 1439 qemu_log_mask(LOG_GUEST_ERROR, "pl330: bad read offset " 1440 TARGET_FMT_plx "\n", offset); 1441 return 0; 1442 } 1443 return s->chan[chan_id].fault_type; 1444 } 1445 switch (offset) { 1446 case PL330_REG_DSR: 1447 return (s->manager.ns << 9) | (s->manager.wakeup << 4) | 1448 (s->manager.state & 0xf); 1449 case PL330_REG_DPC: 1450 return s->manager.pc; 1451 case PL330_REG_INTEN: 1452 return s->inten; 1453 case PL330_REG_INT_EVENT_RIS: 1454 return s->ev_status; 1455 case PL330_REG_INTMIS: 1456 return s->int_status; 1457 case PL330_REG_INTCLR: 1458 /* Documentation says that we can't read this register 1459 * but linux kernel does it 1460 */ 1461 return 0; 1462 case PL330_REG_FSRD: 1463 return s->manager.state ? 1 : 0; 1464 case PL330_REG_FSRC: 1465 res = 0; 1466 for (i = 0; i < s->num_chnls; i++) { 1467 if (s->chan[i].state == pl330_chan_fault || 1468 s->chan[i].state == pl330_chan_fault_completing) { 1469 res |= 1 << i; 1470 } 1471 } 1472 return res; 1473 case PL330_REG_FTRD: 1474 return s->manager.fault_type; 1475 case PL330_REG_DBGSTATUS: 1476 return s->debug_status; 1477 default: 1478 qemu_log_mask(LOG_GUEST_ERROR, "pl330: bad read offset " 1479 TARGET_FMT_plx "\n", offset); 1480 } 1481 return 0; 1482 } 1483 1484 static uint64_t pl330_iomem_read(void *opaque, hwaddr offset, 1485 unsigned size) 1486 { 1487 uint32_t ret = pl330_iomem_read_imp(opaque, offset); 1488 DB_PRINT("addr: %08" HWADDR_PRIx " data: %08" PRIx32 "\n", offset, ret); 1489 return ret; 1490 } 1491 1492 static const MemoryRegionOps pl330_ops = { 1493 .read = pl330_iomem_read, 1494 .write = pl330_iomem_write, 1495 .endianness = DEVICE_NATIVE_ENDIAN, 1496 .impl = { 1497 .min_access_size = 4, 1498 .max_access_size = 4, 1499 } 1500 }; 1501 1502 /* Controller logic and initialization */ 1503 1504 static void pl330_chan_reset(PL330Chan *ch) 1505 { 1506 ch->src = 0; 1507 ch->dst = 0; 1508 ch->pc = 0; 1509 ch->state = pl330_chan_stopped; 1510 ch->watchdog_timer = 0; 1511 ch->stall = 0; 1512 ch->control = 0; 1513 ch->status = 0; 1514 ch->fault_type = 0; 1515 } 1516 1517 static void pl330_reset(DeviceState *d) 1518 { 1519 int i; 1520 PL330State *s = PL330(d); 1521 1522 s->inten = 0; 1523 s->int_status = 0; 1524 s->ev_status = 0; 1525 s->debug_status = 0; 1526 s->num_faulting = 0; 1527 s->manager.ns = s->mgr_ns_at_rst; 1528 pl330_fifo_reset(&s->fifo); 1529 pl330_queue_reset(&s->read_queue); 1530 pl330_queue_reset(&s->write_queue); 1531 1532 for (i = 0; i < s->num_chnls; i++) { 1533 pl330_chan_reset(&s->chan[i]); 1534 } 1535 for (i = 0; i < s->num_periph_req; i++) { 1536 s->periph_busy[i] = 0; 1537 } 1538 1539 timer_del(s->timer); 1540 } 1541 1542 static void pl330_realize(DeviceState *dev, Error **errp) 1543 { 1544 int i; 1545 PL330State *s = PL330(dev); 1546 1547 sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq_abort); 1548 memory_region_init_io(&s->iomem, OBJECT(s), &pl330_ops, s, 1549 "dma", PL330_IOMEM_SIZE); 1550 sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem); 1551 1552 s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, pl330_exec_cycle_timer, s); 1553 1554 s->cfg[0] = (s->mgr_ns_at_rst ? 0x4 : 0) | 1555 (s->num_periph_req > 0 ? 1 : 0) | 1556 ((s->num_chnls - 1) & 0x7) << 4 | 1557 ((s->num_periph_req - 1) & 0x1f) << 12 | 1558 ((s->num_events - 1) & 0x1f) << 17; 1559 1560 switch (s->i_cache_len) { 1561 case (4): 1562 s->cfg[1] |= 2; 1563 break; 1564 case (8): 1565 s->cfg[1] |= 3; 1566 break; 1567 case (16): 1568 s->cfg[1] |= 4; 1569 break; 1570 case (32): 1571 s->cfg[1] |= 5; 1572 break; 1573 default: 1574 error_setg(errp, "Bad value for i-cache_len property: %" PRIx8, 1575 s->i_cache_len); 1576 return; 1577 } 1578 s->cfg[1] |= ((s->num_i_cache_lines - 1) & 0xf) << 4; 1579 1580 s->chan = g_new0(PL330Chan, s->num_chnls); 1581 s->hi_seqn = g_new0(uint8_t, s->num_chnls); 1582 s->lo_seqn = g_new0(uint8_t, s->num_chnls); 1583 for (i = 0; i < s->num_chnls; i++) { 1584 s->chan[i].parent = s; 1585 s->chan[i].tag = (uint8_t)i; 1586 } 1587 s->manager.parent = s; 1588 s->manager.tag = s->num_chnls; 1589 s->manager.is_manager = true; 1590 1591 s->irq = g_new0(qemu_irq, s->num_events); 1592 for (i = 0; i < s->num_events; i++) { 1593 sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq[i]); 1594 } 1595 1596 qdev_init_gpio_in(dev, pl330_dma_stop_irq, PL330_PERIPH_NUM); 1597 1598 switch (s->data_width) { 1599 case (32): 1600 s->cfg[CFG_CRD] |= 0x2; 1601 break; 1602 case (64): 1603 s->cfg[CFG_CRD] |= 0x3; 1604 break; 1605 case (128): 1606 s->cfg[CFG_CRD] |= 0x4; 1607 break; 1608 default: 1609 error_setg(errp, "Bad value for data_width property: %" PRIx8, 1610 s->data_width); 1611 return; 1612 } 1613 1614 s->cfg[CFG_CRD] |= ((s->wr_cap - 1) & 0x7) << 4 | 1615 ((s->wr_q_dep - 1) & 0xf) << 8 | 1616 ((s->rd_cap - 1) & 0x7) << 12 | 1617 ((s->rd_q_dep - 1) & 0xf) << 16 | 1618 ((s->data_buffer_dep - 1) & 0x1ff) << 20; 1619 1620 pl330_queue_init(&s->read_queue, s->rd_q_dep, s); 1621 pl330_queue_init(&s->write_queue, s->wr_q_dep, s); 1622 pl330_fifo_init(&s->fifo, s->data_width / 4 * s->data_buffer_dep); 1623 } 1624 1625 static Property pl330_properties[] = { 1626 /* CR0 */ 1627 DEFINE_PROP_UINT32("num_chnls", PL330State, num_chnls, 8), 1628 DEFINE_PROP_UINT8("num_periph_req", PL330State, num_periph_req, 4), 1629 DEFINE_PROP_UINT8("num_events", PL330State, num_events, 16), 1630 DEFINE_PROP_UINT8("mgr_ns_at_rst", PL330State, mgr_ns_at_rst, 0), 1631 /* CR1 */ 1632 DEFINE_PROP_UINT8("i-cache_len", PL330State, i_cache_len, 4), 1633 DEFINE_PROP_UINT8("num_i-cache_lines", PL330State, num_i_cache_lines, 8), 1634 /* CR2-4 */ 1635 DEFINE_PROP_UINT32("boot_addr", PL330State, cfg[CFG_BOOT_ADDR], 0), 1636 DEFINE_PROP_UINT32("INS", PL330State, cfg[CFG_INS], 0), 1637 DEFINE_PROP_UINT32("PNS", PL330State, cfg[CFG_PNS], 0), 1638 /* CRD */ 1639 DEFINE_PROP_UINT8("data_width", PL330State, data_width, 64), 1640 DEFINE_PROP_UINT8("wr_cap", PL330State, wr_cap, 8), 1641 DEFINE_PROP_UINT8("wr_q_dep", PL330State, wr_q_dep, 16), 1642 DEFINE_PROP_UINT8("rd_cap", PL330State, rd_cap, 8), 1643 DEFINE_PROP_UINT8("rd_q_dep", PL330State, rd_q_dep, 16), 1644 DEFINE_PROP_UINT16("data_buffer_dep", PL330State, data_buffer_dep, 256), 1645 1646 DEFINE_PROP_END_OF_LIST(), 1647 }; 1648 1649 static void pl330_class_init(ObjectClass *klass, void *data) 1650 { 1651 DeviceClass *dc = DEVICE_CLASS(klass); 1652 1653 dc->realize = pl330_realize; 1654 dc->reset = pl330_reset; 1655 dc->props = pl330_properties; 1656 dc->vmsd = &vmstate_pl330; 1657 } 1658 1659 static const TypeInfo pl330_type_info = { 1660 .name = TYPE_PL330, 1661 .parent = TYPE_SYS_BUS_DEVICE, 1662 .instance_size = sizeof(PL330State), 1663 .class_init = pl330_class_init, 1664 }; 1665 1666 static void pl330_register_types(void) 1667 { 1668 type_register_static(&pl330_type_info); 1669 } 1670 1671 type_init(pl330_register_types) 1672