1 /* 2 * Arm PrimeCell PL080/PL081 DMA controller 3 * 4 * Copyright (c) 2006 CodeSourcery. 5 * Written by Paul Brook 6 * 7 * This code is licensed under the GPL. 8 */ 9 10 #include "qemu/osdep.h" 11 #include "hw/sysbus.h" 12 #include "migration/vmstate.h" 13 #include "qemu/log.h" 14 #include "qemu/module.h" 15 #include "hw/dma/pl080.h" 16 #include "hw/hw.h" 17 #include "hw/irq.h" 18 #include "hw/qdev-properties.h" 19 #include "qapi/error.h" 20 21 #define PL080_CONF_E 0x1 22 #define PL080_CONF_M1 0x2 23 #define PL080_CONF_M2 0x4 24 25 #define PL080_CCONF_H 0x40000 26 #define PL080_CCONF_A 0x20000 27 #define PL080_CCONF_L 0x10000 28 #define PL080_CCONF_ITC 0x08000 29 #define PL080_CCONF_IE 0x04000 30 #define PL080_CCONF_E 0x00001 31 32 #define PL080_CCTRL_I 0x80000000 33 #define PL080_CCTRL_DI 0x08000000 34 #define PL080_CCTRL_SI 0x04000000 35 #define PL080_CCTRL_D 0x02000000 36 #define PL080_CCTRL_S 0x01000000 37 38 static const VMStateDescription vmstate_pl080_channel = { 39 .name = "pl080_channel", 40 .version_id = 1, 41 .minimum_version_id = 1, 42 .fields = (const VMStateField[]) { 43 VMSTATE_UINT32(src, pl080_channel), 44 VMSTATE_UINT32(dest, pl080_channel), 45 VMSTATE_UINT32(lli, pl080_channel), 46 VMSTATE_UINT32(ctrl, pl080_channel), 47 VMSTATE_UINT32(conf, pl080_channel), 48 VMSTATE_END_OF_LIST() 49 } 50 }; 51 52 static const VMStateDescription vmstate_pl080 = { 53 .name = "pl080", 54 .version_id = 1, 55 .minimum_version_id = 1, 56 .fields = (const VMStateField[]) { 57 VMSTATE_UINT8(tc_int, PL080State), 58 VMSTATE_UINT8(tc_mask, PL080State), 59 VMSTATE_UINT8(err_int, PL080State), 60 VMSTATE_UINT8(err_mask, PL080State), 61 VMSTATE_UINT32(conf, PL080State), 62 VMSTATE_UINT32(sync, PL080State), 63 VMSTATE_UINT32(req_single, PL080State), 64 VMSTATE_UINT32(req_burst, PL080State), 65 VMSTATE_UINT8(tc_int, PL080State), 66 VMSTATE_UINT8(tc_int, PL080State), 67 VMSTATE_UINT8(tc_int, PL080State), 68 VMSTATE_STRUCT_ARRAY(chan, PL080State, PL080_MAX_CHANNELS, 69 1, vmstate_pl080_channel, pl080_channel), 70 VMSTATE_INT32(running, PL080State), 71 VMSTATE_END_OF_LIST() 72 } 73 }; 74 75 static const unsigned char pl080_id[] = 76 { 0x80, 0x10, 0x04, 0x0a, 0x0d, 0xf0, 0x05, 0xb1 }; 77 78 static const unsigned char pl081_id[] = 79 { 0x81, 0x10, 0x04, 0x0a, 0x0d, 0xf0, 0x05, 0xb1 }; 80 81 static void pl080_update(PL080State *s) 82 { 83 bool tclevel = (s->tc_int & s->tc_mask); 84 bool errlevel = (s->err_int & s->err_mask); 85 86 qemu_set_irq(s->interr, errlevel); 87 qemu_set_irq(s->inttc, tclevel); 88 qemu_set_irq(s->irq, errlevel || tclevel); 89 } 90 91 static void pl080_run(PL080State *s) 92 { 93 int c; 94 int flow; 95 pl080_channel *ch; 96 int swidth; 97 int dwidth; 98 int xsize; 99 int n; 100 int src_id; 101 int dest_id; 102 int size; 103 uint8_t buff[4]; 104 uint32_t req; 105 106 s->tc_mask = 0; 107 for (c = 0; c < s->nchannels; c++) { 108 if (s->chan[c].conf & PL080_CCONF_ITC) 109 s->tc_mask |= 1 << c; 110 if (s->chan[c].conf & PL080_CCONF_IE) 111 s->err_mask |= 1 << c; 112 } 113 114 if ((s->conf & PL080_CONF_E) == 0) 115 return; 116 117 /* If we are already in the middle of a DMA operation then indicate that 118 there may be new DMA requests and return immediately. */ 119 if (s->running) { 120 s->running++; 121 return; 122 } 123 s->running = 1; 124 while (s->running) { 125 for (c = 0; c < s->nchannels; c++) { 126 ch = &s->chan[c]; 127 again: 128 /* Test if thiws channel has any pending DMA requests. */ 129 if ((ch->conf & (PL080_CCONF_H | PL080_CCONF_E)) 130 != PL080_CCONF_E) 131 continue; 132 flow = (ch->conf >> 11) & 7; 133 if (flow >= 4) { 134 hw_error( 135 "pl080_run: Peripheral flow control not implemented\n"); 136 } 137 src_id = (ch->conf >> 1) & 0x1f; 138 dest_id = (ch->conf >> 6) & 0x1f; 139 size = ch->ctrl & 0xfff; 140 req = s->req_single | s->req_burst; 141 switch (flow) { 142 case 0: 143 break; 144 case 1: 145 if ((req & (1u << dest_id)) == 0) 146 size = 0; 147 break; 148 case 2: 149 if ((req & (1u << src_id)) == 0) 150 size = 0; 151 break; 152 case 3: 153 if ((req & (1u << src_id)) == 0 154 || (req & (1u << dest_id)) == 0) 155 size = 0; 156 break; 157 } 158 if (!size) 159 continue; 160 161 /* Transfer one element. */ 162 /* ??? Should transfer multiple elements for a burst request. */ 163 /* ??? Unclear what the proper behavior is when source and 164 destination widths are different. */ 165 swidth = 1 << ((ch->ctrl >> 18) & 7); 166 dwidth = 1 << ((ch->ctrl >> 21) & 7); 167 for (n = 0; n < dwidth; n+= swidth) { 168 address_space_read(&s->downstream_as, ch->src, 169 MEMTXATTRS_UNSPECIFIED, buff + n, swidth); 170 if (ch->ctrl & PL080_CCTRL_SI) 171 ch->src += swidth; 172 } 173 xsize = (dwidth < swidth) ? swidth : dwidth; 174 /* ??? This may pad the value incorrectly for dwidth < 32. */ 175 for (n = 0; n < xsize; n += dwidth) { 176 address_space_write(&s->downstream_as, ch->dest + n, 177 MEMTXATTRS_UNSPECIFIED, buff + n, dwidth); 178 if (ch->ctrl & PL080_CCTRL_DI) 179 ch->dest += swidth; 180 } 181 182 size--; 183 ch->ctrl = (ch->ctrl & 0xfffff000) | size; 184 if (size == 0) { 185 /* Transfer complete. */ 186 if (ch->lli) { 187 ch->src = address_space_ldl_le(&s->downstream_as, 188 ch->lli, 189 MEMTXATTRS_UNSPECIFIED, 190 NULL); 191 ch->dest = address_space_ldl_le(&s->downstream_as, 192 ch->lli + 4, 193 MEMTXATTRS_UNSPECIFIED, 194 NULL); 195 ch->ctrl = address_space_ldl_le(&s->downstream_as, 196 ch->lli + 12, 197 MEMTXATTRS_UNSPECIFIED, 198 NULL); 199 ch->lli = address_space_ldl_le(&s->downstream_as, 200 ch->lli + 8, 201 MEMTXATTRS_UNSPECIFIED, 202 NULL); 203 } else { 204 ch->conf &= ~PL080_CCONF_E; 205 } 206 if (ch->ctrl & PL080_CCTRL_I) { 207 s->tc_int |= 1 << c; 208 } 209 } 210 goto again; 211 } 212 if (--s->running) 213 s->running = 1; 214 } 215 } 216 217 static uint64_t pl080_read(void *opaque, hwaddr offset, 218 unsigned size) 219 { 220 PL080State *s = (PL080State *)opaque; 221 uint32_t i; 222 uint32_t mask; 223 224 if (offset >= 0xfe0 && offset < 0x1000) { 225 if (s->nchannels == 8) { 226 return pl080_id[(offset - 0xfe0) >> 2]; 227 } else { 228 return pl081_id[(offset - 0xfe0) >> 2]; 229 } 230 } 231 if (offset >= 0x100 && offset < 0x200) { 232 i = (offset & 0xe0) >> 5; 233 if (i >= s->nchannels) 234 goto bad_offset; 235 switch ((offset >> 2) & 7) { 236 case 0: /* SrcAddr */ 237 return s->chan[i].src; 238 case 1: /* DestAddr */ 239 return s->chan[i].dest; 240 case 2: /* LLI */ 241 return s->chan[i].lli; 242 case 3: /* Control */ 243 return s->chan[i].ctrl; 244 case 4: /* Configuration */ 245 return s->chan[i].conf; 246 default: 247 goto bad_offset; 248 } 249 } 250 switch (offset >> 2) { 251 case 0: /* IntStatus */ 252 return (s->tc_int & s->tc_mask) | (s->err_int & s->err_mask); 253 case 1: /* IntTCStatus */ 254 return (s->tc_int & s->tc_mask); 255 case 3: /* IntErrorStatus */ 256 return (s->err_int & s->err_mask); 257 case 5: /* RawIntTCStatus */ 258 return s->tc_int; 259 case 6: /* RawIntErrorStatus */ 260 return s->err_int; 261 case 7: /* EnbldChns */ 262 mask = 0; 263 for (i = 0; i < s->nchannels; i++) { 264 if (s->chan[i].conf & PL080_CCONF_E) 265 mask |= 1 << i; 266 } 267 return mask; 268 case 8: /* SoftBReq */ 269 case 9: /* SoftSReq */ 270 case 10: /* SoftLBReq */ 271 case 11: /* SoftLSReq */ 272 /* ??? Implement these. */ 273 return 0; 274 case 12: /* Configuration */ 275 return s->conf; 276 case 13: /* Sync */ 277 return s->sync; 278 default: 279 bad_offset: 280 qemu_log_mask(LOG_GUEST_ERROR, 281 "pl080_read: Bad offset %x\n", (int)offset); 282 return 0; 283 } 284 } 285 286 static void pl080_write(void *opaque, hwaddr offset, 287 uint64_t value, unsigned size) 288 { 289 PL080State *s = (PL080State *)opaque; 290 int i; 291 292 if (offset >= 0x100 && offset < 0x200) { 293 i = (offset & 0xe0) >> 5; 294 if (i >= s->nchannels) 295 goto bad_offset; 296 switch ((offset >> 2) & 7) { 297 case 0: /* SrcAddr */ 298 s->chan[i].src = value; 299 break; 300 case 1: /* DestAddr */ 301 s->chan[i].dest = value; 302 break; 303 case 2: /* LLI */ 304 s->chan[i].lli = value; 305 break; 306 case 3: /* Control */ 307 s->chan[i].ctrl = value; 308 break; 309 case 4: /* Configuration */ 310 s->chan[i].conf = value; 311 pl080_run(s); 312 break; 313 } 314 return; 315 } 316 switch (offset >> 2) { 317 case 2: /* IntTCClear */ 318 s->tc_int &= ~value; 319 break; 320 case 4: /* IntErrorClear */ 321 s->err_int &= ~value; 322 break; 323 case 8: /* SoftBReq */ 324 case 9: /* SoftSReq */ 325 case 10: /* SoftLBReq */ 326 case 11: /* SoftLSReq */ 327 /* ??? Implement these. */ 328 qemu_log_mask(LOG_UNIMP, "pl080_write: Soft DMA not implemented\n"); 329 break; 330 case 12: /* Configuration */ 331 s->conf = value; 332 if (s->conf & (PL080_CONF_M1 | PL080_CONF_M2)) { 333 qemu_log_mask(LOG_UNIMP, 334 "pl080_write: Big-endian DMA not implemented\n"); 335 } 336 pl080_run(s); 337 break; 338 case 13: /* Sync */ 339 s->sync = value; 340 break; 341 default: 342 bad_offset: 343 qemu_log_mask(LOG_GUEST_ERROR, 344 "pl080_write: Bad offset %x\n", (int)offset); 345 } 346 pl080_update(s); 347 } 348 349 static const MemoryRegionOps pl080_ops = { 350 .read = pl080_read, 351 .write = pl080_write, 352 .endianness = DEVICE_NATIVE_ENDIAN, 353 }; 354 355 static void pl080_reset(DeviceState *dev) 356 { 357 PL080State *s = PL080(dev); 358 int i; 359 360 s->tc_int = 0; 361 s->tc_mask = 0; 362 s->err_int = 0; 363 s->err_mask = 0; 364 s->conf = 0; 365 s->sync = 0; 366 s->req_single = 0; 367 s->req_burst = 0; 368 s->running = 0; 369 370 for (i = 0; i < s->nchannels; i++) { 371 s->chan[i].src = 0; 372 s->chan[i].dest = 0; 373 s->chan[i].lli = 0; 374 s->chan[i].ctrl = 0; 375 s->chan[i].conf = 0; 376 } 377 } 378 379 static void pl080_init(Object *obj) 380 { 381 SysBusDevice *sbd = SYS_BUS_DEVICE(obj); 382 PL080State *s = PL080(obj); 383 384 memory_region_init_io(&s->iomem, OBJECT(s), &pl080_ops, s, "pl080", 0x1000); 385 sysbus_init_mmio(sbd, &s->iomem); 386 sysbus_init_irq(sbd, &s->irq); 387 sysbus_init_irq(sbd, &s->interr); 388 sysbus_init_irq(sbd, &s->inttc); 389 s->nchannels = 8; 390 } 391 392 static void pl080_realize(DeviceState *dev, Error **errp) 393 { 394 PL080State *s = PL080(dev); 395 396 if (!s->downstream) { 397 error_setg(errp, "PL080 'downstream' link not set"); 398 return; 399 } 400 401 address_space_init(&s->downstream_as, s->downstream, "pl080-downstream"); 402 } 403 404 static void pl081_init(Object *obj) 405 { 406 PL080State *s = PL080(obj); 407 408 s->nchannels = 2; 409 } 410 411 static Property pl080_properties[] = { 412 DEFINE_PROP_LINK("downstream", PL080State, downstream, 413 TYPE_MEMORY_REGION, MemoryRegion *), 414 DEFINE_PROP_END_OF_LIST(), 415 }; 416 417 static void pl080_class_init(ObjectClass *oc, void *data) 418 { 419 DeviceClass *dc = DEVICE_CLASS(oc); 420 421 dc->vmsd = &vmstate_pl080; 422 dc->realize = pl080_realize; 423 device_class_set_props(dc, pl080_properties); 424 dc->reset = pl080_reset; 425 } 426 427 static const TypeInfo pl080_info = { 428 .name = TYPE_PL080, 429 .parent = TYPE_SYS_BUS_DEVICE, 430 .instance_size = sizeof(PL080State), 431 .instance_init = pl080_init, 432 .class_init = pl080_class_init, 433 }; 434 435 static const TypeInfo pl081_info = { 436 .name = TYPE_PL081, 437 .parent = TYPE_PL080, 438 .instance_init = pl081_init, 439 }; 440 441 /* The PL080 and PL081 are the same except for the number of channels 442 they implement (8 and 2 respectively). */ 443 static void pl080_register_types(void) 444 { 445 type_register_static(&pl080_info); 446 type_register_static(&pl081_info); 447 } 448 449 type_init(pl080_register_types) 450