1 /* 2 * Arm PrimeCell PL080/PL081 DMA controller 3 * 4 * Copyright (c) 2006 CodeSourcery. 5 * Written by Paul Brook 6 * 7 * This code is licensed under the GPL. 8 */ 9 10 #include "hw/sysbus.h" 11 12 #define PL080_MAX_CHANNELS 8 13 #define PL080_CONF_E 0x1 14 #define PL080_CONF_M1 0x2 15 #define PL080_CONF_M2 0x4 16 17 #define PL080_CCONF_H 0x40000 18 #define PL080_CCONF_A 0x20000 19 #define PL080_CCONF_L 0x10000 20 #define PL080_CCONF_ITC 0x08000 21 #define PL080_CCONF_IE 0x04000 22 #define PL080_CCONF_E 0x00001 23 24 #define PL080_CCTRL_I 0x80000000 25 #define PL080_CCTRL_DI 0x08000000 26 #define PL080_CCTRL_SI 0x04000000 27 #define PL080_CCTRL_D 0x02000000 28 #define PL080_CCTRL_S 0x01000000 29 30 typedef struct { 31 uint32_t src; 32 uint32_t dest; 33 uint32_t lli; 34 uint32_t ctrl; 35 uint32_t conf; 36 } pl080_channel; 37 38 typedef struct { 39 SysBusDevice busdev; 40 MemoryRegion iomem; 41 uint8_t tc_int; 42 uint8_t tc_mask; 43 uint8_t err_int; 44 uint8_t err_mask; 45 uint32_t conf; 46 uint32_t sync; 47 uint32_t req_single; 48 uint32_t req_burst; 49 pl080_channel chan[PL080_MAX_CHANNELS]; 50 int nchannels; 51 /* Flag to avoid recursive DMA invocations. */ 52 int running; 53 qemu_irq irq; 54 } pl080_state; 55 56 static const VMStateDescription vmstate_pl080_channel = { 57 .name = "pl080_channel", 58 .version_id = 1, 59 .minimum_version_id = 1, 60 .fields = (VMStateField[]) { 61 VMSTATE_UINT32(src, pl080_channel), 62 VMSTATE_UINT32(dest, pl080_channel), 63 VMSTATE_UINT32(lli, pl080_channel), 64 VMSTATE_UINT32(ctrl, pl080_channel), 65 VMSTATE_UINT32(conf, pl080_channel), 66 VMSTATE_END_OF_LIST() 67 } 68 }; 69 70 static const VMStateDescription vmstate_pl080 = { 71 .name = "pl080", 72 .version_id = 1, 73 .minimum_version_id = 1, 74 .fields = (VMStateField[]) { 75 VMSTATE_UINT8(tc_int, pl080_state), 76 VMSTATE_UINT8(tc_mask, pl080_state), 77 VMSTATE_UINT8(err_int, pl080_state), 78 VMSTATE_UINT8(err_mask, pl080_state), 79 VMSTATE_UINT32(conf, pl080_state), 80 VMSTATE_UINT32(sync, pl080_state), 81 VMSTATE_UINT32(req_single, pl080_state), 82 VMSTATE_UINT32(req_burst, pl080_state), 83 VMSTATE_UINT8(tc_int, pl080_state), 84 VMSTATE_UINT8(tc_int, pl080_state), 85 VMSTATE_UINT8(tc_int, pl080_state), 86 VMSTATE_STRUCT_ARRAY(chan, pl080_state, PL080_MAX_CHANNELS, 87 1, vmstate_pl080_channel, pl080_channel), 88 VMSTATE_INT32(running, pl080_state), 89 VMSTATE_END_OF_LIST() 90 } 91 }; 92 93 static const unsigned char pl080_id[] = 94 { 0x80, 0x10, 0x04, 0x0a, 0x0d, 0xf0, 0x05, 0xb1 }; 95 96 static const unsigned char pl081_id[] = 97 { 0x81, 0x10, 0x04, 0x0a, 0x0d, 0xf0, 0x05, 0xb1 }; 98 99 static void pl080_update(pl080_state *s) 100 { 101 if ((s->tc_int & s->tc_mask) 102 || (s->err_int & s->err_mask)) 103 qemu_irq_raise(s->irq); 104 else 105 qemu_irq_lower(s->irq); 106 } 107 108 static void pl080_run(pl080_state *s) 109 { 110 int c; 111 int flow; 112 pl080_channel *ch; 113 int swidth; 114 int dwidth; 115 int xsize; 116 int n; 117 int src_id; 118 int dest_id; 119 int size; 120 uint8_t buff[4]; 121 uint32_t req; 122 123 s->tc_mask = 0; 124 for (c = 0; c < s->nchannels; c++) { 125 if (s->chan[c].conf & PL080_CCONF_ITC) 126 s->tc_mask |= 1 << c; 127 if (s->chan[c].conf & PL080_CCONF_IE) 128 s->err_mask |= 1 << c; 129 } 130 131 if ((s->conf & PL080_CONF_E) == 0) 132 return; 133 134 hw_error("DMA active\n"); 135 /* If we are already in the middle of a DMA operation then indicate that 136 there may be new DMA requests and return immediately. */ 137 if (s->running) { 138 s->running++; 139 return; 140 } 141 s->running = 1; 142 while (s->running) { 143 for (c = 0; c < s->nchannels; c++) { 144 ch = &s->chan[c]; 145 again: 146 /* Test if thiws channel has any pending DMA requests. */ 147 if ((ch->conf & (PL080_CCONF_H | PL080_CCONF_E)) 148 != PL080_CCONF_E) 149 continue; 150 flow = (ch->conf >> 11) & 7; 151 if (flow >= 4) { 152 hw_error( 153 "pl080_run: Peripheral flow control not implemented\n"); 154 } 155 src_id = (ch->conf >> 1) & 0x1f; 156 dest_id = (ch->conf >> 6) & 0x1f; 157 size = ch->ctrl & 0xfff; 158 req = s->req_single | s->req_burst; 159 switch (flow) { 160 case 0: 161 break; 162 case 1: 163 if ((req & (1u << dest_id)) == 0) 164 size = 0; 165 break; 166 case 2: 167 if ((req & (1u << src_id)) == 0) 168 size = 0; 169 break; 170 case 3: 171 if ((req & (1u << src_id)) == 0 172 || (req & (1u << dest_id)) == 0) 173 size = 0; 174 break; 175 } 176 if (!size) 177 continue; 178 179 /* Transfer one element. */ 180 /* ??? Should transfer multiple elements for a burst request. */ 181 /* ??? Unclear what the proper behavior is when source and 182 destination widths are different. */ 183 swidth = 1 << ((ch->ctrl >> 18) & 7); 184 dwidth = 1 << ((ch->ctrl >> 21) & 7); 185 for (n = 0; n < dwidth; n+= swidth) { 186 cpu_physical_memory_read(ch->src, buff + n, swidth); 187 if (ch->ctrl & PL080_CCTRL_SI) 188 ch->src += swidth; 189 } 190 xsize = (dwidth < swidth) ? swidth : dwidth; 191 /* ??? This may pad the value incorrectly for dwidth < 32. */ 192 for (n = 0; n < xsize; n += dwidth) { 193 cpu_physical_memory_write(ch->dest + n, buff + n, dwidth); 194 if (ch->ctrl & PL080_CCTRL_DI) 195 ch->dest += swidth; 196 } 197 198 size--; 199 ch->ctrl = (ch->ctrl & 0xfffff000) | size; 200 if (size == 0) { 201 /* Transfer complete. */ 202 if (ch->lli) { 203 ch->src = ldl_le_phys(ch->lli); 204 ch->dest = ldl_le_phys(ch->lli + 4); 205 ch->ctrl = ldl_le_phys(ch->lli + 12); 206 ch->lli = ldl_le_phys(ch->lli + 8); 207 } else { 208 ch->conf &= ~PL080_CCONF_E; 209 } 210 if (ch->ctrl & PL080_CCTRL_I) { 211 s->tc_int |= 1 << c; 212 } 213 } 214 goto again; 215 } 216 if (--s->running) 217 s->running = 1; 218 } 219 } 220 221 static uint64_t pl080_read(void *opaque, hwaddr offset, 222 unsigned size) 223 { 224 pl080_state *s = (pl080_state *)opaque; 225 uint32_t i; 226 uint32_t mask; 227 228 if (offset >= 0xfe0 && offset < 0x1000) { 229 if (s->nchannels == 8) { 230 return pl080_id[(offset - 0xfe0) >> 2]; 231 } else { 232 return pl081_id[(offset - 0xfe0) >> 2]; 233 } 234 } 235 if (offset >= 0x100 && offset < 0x200) { 236 i = (offset & 0xe0) >> 5; 237 if (i >= s->nchannels) 238 goto bad_offset; 239 switch (offset >> 2) { 240 case 0: /* SrcAddr */ 241 return s->chan[i].src; 242 case 1: /* DestAddr */ 243 return s->chan[i].dest; 244 case 2: /* LLI */ 245 return s->chan[i].lli; 246 case 3: /* Control */ 247 return s->chan[i].ctrl; 248 case 4: /* Configuration */ 249 return s->chan[i].conf; 250 default: 251 goto bad_offset; 252 } 253 } 254 switch (offset >> 2) { 255 case 0: /* IntStatus */ 256 return (s->tc_int & s->tc_mask) | (s->err_int & s->err_mask); 257 case 1: /* IntTCStatus */ 258 return (s->tc_int & s->tc_mask); 259 case 3: /* IntErrorStatus */ 260 return (s->err_int & s->err_mask); 261 case 5: /* RawIntTCStatus */ 262 return s->tc_int; 263 case 6: /* RawIntErrorStatus */ 264 return s->err_int; 265 case 7: /* EnbldChns */ 266 mask = 0; 267 for (i = 0; i < s->nchannels; i++) { 268 if (s->chan[i].conf & PL080_CCONF_E) 269 mask |= 1 << i; 270 } 271 return mask; 272 case 8: /* SoftBReq */ 273 case 9: /* SoftSReq */ 274 case 10: /* SoftLBReq */ 275 case 11: /* SoftLSReq */ 276 /* ??? Implement these. */ 277 return 0; 278 case 12: /* Configuration */ 279 return s->conf; 280 case 13: /* Sync */ 281 return s->sync; 282 default: 283 bad_offset: 284 qemu_log_mask(LOG_GUEST_ERROR, 285 "pl080_read: Bad offset %x\n", (int)offset); 286 return 0; 287 } 288 } 289 290 static void pl080_write(void *opaque, hwaddr offset, 291 uint64_t value, unsigned size) 292 { 293 pl080_state *s = (pl080_state *)opaque; 294 int i; 295 296 if (offset >= 0x100 && offset < 0x200) { 297 i = (offset & 0xe0) >> 5; 298 if (i >= s->nchannels) 299 goto bad_offset; 300 switch (offset >> 2) { 301 case 0: /* SrcAddr */ 302 s->chan[i].src = value; 303 break; 304 case 1: /* DestAddr */ 305 s->chan[i].dest = value; 306 break; 307 case 2: /* LLI */ 308 s->chan[i].lli = value; 309 break; 310 case 3: /* Control */ 311 s->chan[i].ctrl = value; 312 break; 313 case 4: /* Configuration */ 314 s->chan[i].conf = value; 315 pl080_run(s); 316 break; 317 } 318 } 319 switch (offset >> 2) { 320 case 2: /* IntTCClear */ 321 s->tc_int &= ~value; 322 break; 323 case 4: /* IntErrorClear */ 324 s->err_int &= ~value; 325 break; 326 case 8: /* SoftBReq */ 327 case 9: /* SoftSReq */ 328 case 10: /* SoftLBReq */ 329 case 11: /* SoftLSReq */ 330 /* ??? Implement these. */ 331 qemu_log_mask(LOG_UNIMP, "pl080_write: Soft DMA not implemented\n"); 332 break; 333 case 12: /* Configuration */ 334 s->conf = value; 335 if (s->conf & (PL080_CONF_M1 | PL080_CONF_M1)) { 336 qemu_log_mask(LOG_UNIMP, 337 "pl080_write: Big-endian DMA not implemented\n"); 338 } 339 pl080_run(s); 340 break; 341 case 13: /* Sync */ 342 s->sync = value; 343 break; 344 default: 345 bad_offset: 346 qemu_log_mask(LOG_GUEST_ERROR, 347 "pl080_write: Bad offset %x\n", (int)offset); 348 } 349 pl080_update(s); 350 } 351 352 static const MemoryRegionOps pl080_ops = { 353 .read = pl080_read, 354 .write = pl080_write, 355 .endianness = DEVICE_NATIVE_ENDIAN, 356 }; 357 358 static int pl08x_init(SysBusDevice *dev, int nchannels) 359 { 360 pl080_state *s = FROM_SYSBUS(pl080_state, dev); 361 362 memory_region_init_io(&s->iomem, NULL, &pl080_ops, s, "pl080", 0x1000); 363 sysbus_init_mmio(dev, &s->iomem); 364 sysbus_init_irq(dev, &s->irq); 365 s->nchannels = nchannels; 366 return 0; 367 } 368 369 static int pl080_init(SysBusDevice *dev) 370 { 371 return pl08x_init(dev, 8); 372 } 373 374 static int pl081_init(SysBusDevice *dev) 375 { 376 return pl08x_init(dev, 2); 377 } 378 379 static void pl080_class_init(ObjectClass *klass, void *data) 380 { 381 DeviceClass *dc = DEVICE_CLASS(klass); 382 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); 383 384 k->init = pl080_init; 385 dc->no_user = 1; 386 dc->vmsd = &vmstate_pl080; 387 } 388 389 static const TypeInfo pl080_info = { 390 .name = "pl080", 391 .parent = TYPE_SYS_BUS_DEVICE, 392 .instance_size = sizeof(pl080_state), 393 .class_init = pl080_class_init, 394 }; 395 396 static void pl081_class_init(ObjectClass *klass, void *data) 397 { 398 DeviceClass *dc = DEVICE_CLASS(klass); 399 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); 400 401 k->init = pl081_init; 402 dc->no_user = 1; 403 dc->vmsd = &vmstate_pl080; 404 } 405 406 static const TypeInfo pl081_info = { 407 .name = "pl081", 408 .parent = TYPE_SYS_BUS_DEVICE, 409 .instance_size = sizeof(pl080_state), 410 .class_init = pl081_class_init, 411 }; 412 413 /* The PL080 and PL081 are the same except for the number of channels 414 they implement (8 and 2 respectively). */ 415 static void pl080_register_types(void) 416 { 417 type_register_static(&pl080_info); 418 type_register_static(&pl081_info); 419 } 420 421 type_init(pl080_register_types) 422