xref: /openbmc/qemu/hw/display/xlnx_dp.c (revision 988fa103)
1 /*
2  * xlnx_dp.c
3  *
4  *  Copyright (C) 2015 : GreenSocs Ltd
5  *      http://www.greensocs.com/ , email: info@greensocs.com
6  *
7  *  Developed by :
8  *  Frederic Konrad   <fred.konrad@greensocs.com>
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License as published by
12  * the Free Software Foundation, either version 2 of the License, or
13  * (at your option)any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18  * GNU General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License along
21  * with this program; if not, see <http://www.gnu.org/licenses/>.
22  *
23  */
24 
25 #include "qemu/osdep.h"
26 #include "qapi/error.h"
27 #include "qemu/log.h"
28 #include "qemu/module.h"
29 #include "hw/display/xlnx_dp.h"
30 
31 #ifndef DEBUG_DP
32 #define DEBUG_DP 0
33 #endif
34 
35 #define DPRINTF(fmt, ...) do {                                                 \
36     if (DEBUG_DP) {                                                            \
37         qemu_log("xlnx_dp: " fmt , ## __VA_ARGS__);                            \
38     }                                                                          \
39 } while (0)
40 
41 /*
42  * Register offset for DP.
43  */
44 #define DP_LINK_BW_SET                      (0x0000 >> 2)
45 #define DP_LANE_COUNT_SET                   (0x0004 >> 2)
46 #define DP_ENHANCED_FRAME_EN                (0x0008 >> 2)
47 #define DP_TRAINING_PATTERN_SET             (0x000C >> 2)
48 #define DP_LINK_QUAL_PATTERN_SET            (0x0010 >> 2)
49 #define DP_SCRAMBLING_DISABLE               (0x0014 >> 2)
50 #define DP_DOWNSPREAD_CTRL                  (0x0018 >> 2)
51 #define DP_SOFTWARE_RESET                   (0x001C >> 2)
52 #define DP_TRANSMITTER_ENABLE               (0x0080 >> 2)
53 #define DP_MAIN_STREAM_ENABLE               (0x0084 >> 2)
54 #define DP_FORCE_SCRAMBLER_RESET            (0x00C0 >> 2)
55 #define DP_VERSION_REGISTER                 (0x00F8 >> 2)
56 #define DP_CORE_ID                          (0x00FC >> 2)
57 
58 #define DP_AUX_COMMAND_REGISTER             (0x0100 >> 2)
59 #define AUX_ADDR_ONLY_MASK                  (0x1000)
60 #define AUX_COMMAND_MASK                    (0x0F00)
61 #define AUX_COMMAND_SHIFT                   (8)
62 #define AUX_COMMAND_NBYTES                  (0x000F)
63 
64 #define DP_AUX_WRITE_FIFO                   (0x0104 >> 2)
65 #define DP_AUX_ADDRESS                      (0x0108 >> 2)
66 #define DP_AUX_CLOCK_DIVIDER                (0x010C >> 2)
67 #define DP_TX_USER_FIFO_OVERFLOW            (0x0110 >> 2)
68 #define DP_INTERRUPT_SIGNAL_STATE           (0x0130 >> 2)
69 #define DP_AUX_REPLY_DATA                   (0x0134 >> 2)
70 #define DP_AUX_REPLY_CODE                   (0x0138 >> 2)
71 #define DP_AUX_REPLY_COUNT                  (0x013C >> 2)
72 #define DP_REPLY_DATA_COUNT                 (0x0148 >> 2)
73 #define DP_REPLY_STATUS                     (0x014C >> 2)
74 #define DP_HPD_DURATION                     (0x0150 >> 2)
75 #define DP_MAIN_STREAM_HTOTAL               (0x0180 >> 2)
76 #define DP_MAIN_STREAM_VTOTAL               (0x0184 >> 2)
77 #define DP_MAIN_STREAM_POLARITY             (0x0188 >> 2)
78 #define DP_MAIN_STREAM_HSWIDTH              (0x018C >> 2)
79 #define DP_MAIN_STREAM_VSWIDTH              (0x0190 >> 2)
80 #define DP_MAIN_STREAM_HRES                 (0x0194 >> 2)
81 #define DP_MAIN_STREAM_VRES                 (0x0198 >> 2)
82 #define DP_MAIN_STREAM_HSTART               (0x019C >> 2)
83 #define DP_MAIN_STREAM_VSTART               (0x01A0 >> 2)
84 #define DP_MAIN_STREAM_MISC0                (0x01A4 >> 2)
85 #define DP_MAIN_STREAM_MISC1                (0x01A8 >> 2)
86 #define DP_MAIN_STREAM_M_VID                (0x01AC >> 2)
87 #define DP_MSA_TRANSFER_UNIT_SIZE           (0x01B0 >> 2)
88 #define DP_MAIN_STREAM_N_VID                (0x01B4 >> 2)
89 #define DP_USER_DATA_COUNT_PER_LANE         (0x01BC >> 2)
90 #define DP_MIN_BYTES_PER_TU                 (0x01C4 >> 2)
91 #define DP_FRAC_BYTES_PER_TU                (0x01C8 >> 2)
92 #define DP_INIT_WAIT                        (0x01CC >> 2)
93 #define DP_PHY_RESET                        (0x0200 >> 2)
94 #define DP_PHY_VOLTAGE_DIFF_LANE_0          (0x0220 >> 2)
95 #define DP_PHY_VOLTAGE_DIFF_LANE_1          (0x0224 >> 2)
96 #define DP_TRANSMIT_PRBS7                   (0x0230 >> 2)
97 #define DP_PHY_CLOCK_SELECT                 (0x0234 >> 2)
98 #define DP_TX_PHY_POWER_DOWN                (0x0238 >> 2)
99 #define DP_PHY_PRECURSOR_LANE_0             (0x023C >> 2)
100 #define DP_PHY_PRECURSOR_LANE_1             (0x0240 >> 2)
101 #define DP_PHY_POSTCURSOR_LANE_0            (0x024C >> 2)
102 #define DP_PHY_POSTCURSOR_LANE_1            (0x0250 >> 2)
103 #define DP_PHY_STATUS                       (0x0280 >> 2)
104 
105 #define DP_TX_AUDIO_CONTROL                 (0x0300 >> 2)
106 #define DP_TX_AUD_CTRL                      (1)
107 
108 #define DP_TX_AUDIO_CHANNELS                (0x0304 >> 2)
109 #define DP_TX_AUDIO_INFO_DATA(n)            ((0x0308 + 4 * n) >> 2)
110 #define DP_TX_M_AUD                         (0x0328 >> 2)
111 #define DP_TX_N_AUD                         (0x032C >> 2)
112 #define DP_TX_AUDIO_EXT_DATA(n)             ((0x0330 + 4 * n) >> 2)
113 #define DP_INT_STATUS                       (0x03A0 >> 2)
114 #define DP_INT_MASK                         (0x03A4 >> 2)
115 #define DP_INT_EN                           (0x03A8 >> 2)
116 #define DP_INT_DS                           (0x03AC >> 2)
117 
118 /*
119  * Registers offset for Audio Video Buffer configuration.
120  */
121 #define V_BLEND_OFFSET                      (0xA000)
122 #define V_BLEND_BG_CLR_0                    (0x0000 >> 2)
123 #define V_BLEND_BG_CLR_1                    (0x0004 >> 2)
124 #define V_BLEND_BG_CLR_2                    (0x0008 >> 2)
125 #define V_BLEND_SET_GLOBAL_ALPHA_REG        (0x000C >> 2)
126 #define V_BLEND_OUTPUT_VID_FORMAT           (0x0014 >> 2)
127 #define V_BLEND_LAYER0_CONTROL              (0x0018 >> 2)
128 #define V_BLEND_LAYER1_CONTROL              (0x001C >> 2)
129 
130 #define V_BLEND_RGB2YCBCR_COEFF(n)          ((0x0020 + 4 * n) >> 2)
131 #define V_BLEND_IN1CSC_COEFF(n)             ((0x0044 + 4 * n) >> 2)
132 
133 #define V_BLEND_LUMA_IN1CSC_OFFSET          (0x0068 >> 2)
134 #define V_BLEND_CR_IN1CSC_OFFSET            (0x006C >> 2)
135 #define V_BLEND_CB_IN1CSC_OFFSET            (0x0070 >> 2)
136 #define V_BLEND_LUMA_OUTCSC_OFFSET          (0x0074 >> 2)
137 #define V_BLEND_CR_OUTCSC_OFFSET            (0x0078 >> 2)
138 #define V_BLEND_CB_OUTCSC_OFFSET            (0x007C >> 2)
139 
140 #define V_BLEND_IN2CSC_COEFF(n)             ((0x0080 + 4 * n) >> 2)
141 
142 #define V_BLEND_LUMA_IN2CSC_OFFSET          (0x00A4 >> 2)
143 #define V_BLEND_CR_IN2CSC_OFFSET            (0x00A8 >> 2)
144 #define V_BLEND_CB_IN2CSC_OFFSET            (0x00AC >> 2)
145 #define V_BLEND_CHROMA_KEY_ENABLE           (0x01D0 >> 2)
146 #define V_BLEND_CHROMA_KEY_COMP1            (0x01D4 >> 2)
147 #define V_BLEND_CHROMA_KEY_COMP2            (0x01D8 >> 2)
148 #define V_BLEND_CHROMA_KEY_COMP3            (0x01DC >> 2)
149 
150 /*
151  * Registers offset for Audio Video Buffer configuration.
152  */
153 #define AV_BUF_MANAGER_OFFSET               (0xB000)
154 #define AV_BUF_FORMAT                       (0x0000 >> 2)
155 #define AV_BUF_NON_LIVE_LATENCY             (0x0008 >> 2)
156 #define AV_CHBUF0                           (0x0010 >> 2)
157 #define AV_CHBUF1                           (0x0014 >> 2)
158 #define AV_CHBUF2                           (0x0018 >> 2)
159 #define AV_CHBUF3                           (0x001C >> 2)
160 #define AV_CHBUF4                           (0x0020 >> 2)
161 #define AV_CHBUF5                           (0x0024 >> 2)
162 #define AV_BUF_STC_CONTROL                  (0x002C >> 2)
163 #define AV_BUF_STC_INIT_VALUE0              (0x0030 >> 2)
164 #define AV_BUF_STC_INIT_VALUE1              (0x0034 >> 2)
165 #define AV_BUF_STC_ADJ                      (0x0038 >> 2)
166 #define AV_BUF_STC_VIDEO_VSYNC_TS_REG0      (0x003C >> 2)
167 #define AV_BUF_STC_VIDEO_VSYNC_TS_REG1      (0x0040 >> 2)
168 #define AV_BUF_STC_EXT_VSYNC_TS_REG0        (0x0044 >> 2)
169 #define AV_BUF_STC_EXT_VSYNC_TS_REG1        (0x0048 >> 2)
170 #define AV_BUF_STC_CUSTOM_EVENT_TS_REG0     (0x004C >> 2)
171 #define AV_BUF_STC_CUSTOM_EVENT_TS_REG1     (0x0050 >> 2)
172 #define AV_BUF_STC_CUSTOM_EVENT2_TS_REG0    (0x0054 >> 2)
173 #define AV_BUF_STC_CUSTOM_EVENT2_TS_REG1    (0x0058 >> 2)
174 #define AV_BUF_STC_SNAPSHOT0                (0x0060 >> 2)
175 #define AV_BUF_STC_SNAPSHOT1                (0x0064 >> 2)
176 #define AV_BUF_OUTPUT_AUDIO_VIDEO_SELECT    (0x0070 >> 2)
177 #define AV_BUF_HCOUNT_VCOUNT_INT0           (0x0074 >> 2)
178 #define AV_BUF_HCOUNT_VCOUNT_INT1           (0x0078 >> 2)
179 #define AV_BUF_DITHER_CONFIG                (0x007C >> 2)
180 #define AV_BUF_DITHER_CONFIG_MAX            (0x008C >> 2)
181 #define AV_BUF_DITHER_CONFIG_MIN            (0x0090 >> 2)
182 #define AV_BUF_PATTERN_GEN_SELECT           (0x0100 >> 2)
183 #define AV_BUF_AUD_VID_CLK_SOURCE           (0x0120 >> 2)
184 #define AV_BUF_SRST_REG                     (0x0124 >> 2)
185 #define AV_BUF_AUDIO_RDY_INTERVAL           (0x0128 >> 2)
186 #define AV_BUF_AUDIO_CH_CONFIG              (0x012C >> 2)
187 
188 #define AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(n)((0x0200 + 4 * n) >> 2)
189 
190 #define AV_BUF_VIDEO_COMP_SCALE_FACTOR(n)   ((0x020C + 4 * n) >> 2)
191 
192 #define AV_BUF_LIVE_VIDEO_COMP_SF(n)        ((0x0218 + 4 * n) >> 2)
193 
194 #define AV_BUF_LIVE_VID_CONFIG              (0x0224 >> 2)
195 
196 #define AV_BUF_LIVE_GFX_COMP_SF(n)          ((0x0228 + 4 * n) >> 2)
197 
198 #define AV_BUF_LIVE_GFX_CONFIG              (0x0234 >> 2)
199 
200 #define AUDIO_MIXER_REGISTER_OFFSET         (0xC000)
201 #define AUDIO_MIXER_VOLUME_CONTROL          (0x0000 >> 2)
202 #define AUDIO_MIXER_META_DATA               (0x0004 >> 2)
203 #define AUD_CH_STATUS_REG(n)                ((0x0008 + 4 * n) >> 2)
204 #define AUD_CH_A_DATA_REG(n)                ((0x0020 + 4 * n) >> 2)
205 #define AUD_CH_B_DATA_REG(n)                ((0x0038 + 4 * n) >> 2)
206 
207 #define DP_AUDIO_DMA_CHANNEL(n)             (4 + n)
208 #define DP_GRAPHIC_DMA_CHANNEL              (3)
209 #define DP_VIDEO_DMA_CHANNEL                (0)
210 
211 enum DPGraphicFmt {
212     DP_GRAPHIC_RGBA8888 = 0 << 8,
213     DP_GRAPHIC_ABGR8888 = 1 << 8,
214     DP_GRAPHIC_RGB888 = 2 << 8,
215     DP_GRAPHIC_BGR888 = 3 << 8,
216     DP_GRAPHIC_RGBA5551 = 4 << 8,
217     DP_GRAPHIC_RGBA4444 = 5 << 8,
218     DP_GRAPHIC_RGB565 = 6 << 8,
219     DP_GRAPHIC_8BPP = 7 << 8,
220     DP_GRAPHIC_4BPP = 8 << 8,
221     DP_GRAPHIC_2BPP = 9 << 8,
222     DP_GRAPHIC_1BPP = 10 << 8,
223     DP_GRAPHIC_MASK = 0xF << 8
224 };
225 
226 enum DPVideoFmt {
227     DP_NL_VID_CB_Y0_CR_Y1 = 0,
228     DP_NL_VID_CR_Y0_CB_Y1 = 1,
229     DP_NL_VID_Y0_CR_Y1_CB = 2,
230     DP_NL_VID_Y0_CB_Y1_CR = 3,
231     DP_NL_VID_YV16 = 4,
232     DP_NL_VID_YV24 = 5,
233     DP_NL_VID_YV16CL = 6,
234     DP_NL_VID_MONO = 7,
235     DP_NL_VID_YV16CL2 = 8,
236     DP_NL_VID_YUV444 = 9,
237     DP_NL_VID_RGB888 = 10,
238     DP_NL_VID_RGBA8880 = 11,
239     DP_NL_VID_RGB888_10BPC = 12,
240     DP_NL_VID_YUV444_10BPC = 13,
241     DP_NL_VID_YV16CL2_10BPC = 14,
242     DP_NL_VID_YV16CL_10BPC = 15,
243     DP_NL_VID_YV16_10BPC = 16,
244     DP_NL_VID_YV24_10BPC = 17,
245     DP_NL_VID_Y_ONLY_10BPC = 18,
246     DP_NL_VID_YV16_420 = 19,
247     DP_NL_VID_YV16CL_420 = 20,
248     DP_NL_VID_YV16CL2_420 = 21,
249     DP_NL_VID_YV16_420_10BPC = 22,
250     DP_NL_VID_YV16CL_420_10BPC = 23,
251     DP_NL_VID_YV16CL2_420_10BPC = 24,
252     DP_NL_VID_FMT_MASK = 0x1F
253 };
254 
255 typedef enum DPGraphicFmt DPGraphicFmt;
256 typedef enum DPVideoFmt DPVideoFmt;
257 
258 static const VMStateDescription vmstate_dp = {
259     .name = TYPE_XLNX_DP,
260     .version_id = 1,
261     .fields = (VMStateField[]){
262         VMSTATE_UINT32_ARRAY(core_registers, XlnxDPState,
263                              DP_CORE_REG_ARRAY_SIZE),
264         VMSTATE_UINT32_ARRAY(avbufm_registers, XlnxDPState,
265                              DP_AVBUF_REG_ARRAY_SIZE),
266         VMSTATE_UINT32_ARRAY(vblend_registers, XlnxDPState,
267                              DP_VBLEND_REG_ARRAY_SIZE),
268         VMSTATE_UINT32_ARRAY(audio_registers, XlnxDPState,
269                              DP_AUDIO_REG_ARRAY_SIZE),
270         VMSTATE_END_OF_LIST()
271     }
272 };
273 
274 static void xlnx_dp_update_irq(XlnxDPState *s);
275 
276 static uint64_t xlnx_dp_audio_read(void *opaque, hwaddr offset, unsigned size)
277 {
278     XlnxDPState *s = XLNX_DP(opaque);
279 
280     offset = offset >> 2;
281     return s->audio_registers[offset];
282 }
283 
284 static void xlnx_dp_audio_write(void *opaque, hwaddr offset, uint64_t value,
285                                 unsigned size)
286 {
287     XlnxDPState *s = XLNX_DP(opaque);
288 
289     offset = offset >> 2;
290 
291     switch (offset) {
292     case AUDIO_MIXER_META_DATA:
293         s->audio_registers[offset] = value & 0x00000001;
294         break;
295     default:
296         s->audio_registers[offset] = value;
297         break;
298     }
299 }
300 
301 static const MemoryRegionOps audio_ops = {
302     .read = xlnx_dp_audio_read,
303     .write = xlnx_dp_audio_write,
304     .endianness = DEVICE_NATIVE_ENDIAN,
305 };
306 
307 static inline uint32_t xlnx_dp_audio_get_volume(XlnxDPState *s,
308                                                 uint8_t channel)
309 {
310     switch (channel) {
311     case 0:
312         return extract32(s->audio_registers[AUDIO_MIXER_VOLUME_CONTROL], 0, 16);
313     case 1:
314         return extract32(s->audio_registers[AUDIO_MIXER_VOLUME_CONTROL], 16,
315                                                                          16);
316     default:
317         return 0;
318     }
319 }
320 
321 static inline void xlnx_dp_audio_activate(XlnxDPState *s)
322 {
323     bool activated = ((s->core_registers[DP_TX_AUDIO_CONTROL]
324                    & DP_TX_AUD_CTRL) != 0);
325     AUD_set_active_out(s->amixer_output_stream, activated);
326     xlnx_dpdma_set_host_data_location(s->dpdma, DP_AUDIO_DMA_CHANNEL(0),
327                                       &s->audio_buffer_0);
328     xlnx_dpdma_set_host_data_location(s->dpdma, DP_AUDIO_DMA_CHANNEL(1),
329                                       &s->audio_buffer_1);
330 }
331 
332 static inline void xlnx_dp_audio_mix_buffer(XlnxDPState *s)
333 {
334     /*
335      * Audio packets are signed and have this shape:
336      * | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 |
337      * | R3 | L3 | R2 | L2 | R1 | L1 | R0 | L0 |
338      *
339      * Output audio is 16bits saturated.
340      */
341     int i;
342 
343     if ((s->audio_data_available[0]) && (xlnx_dp_audio_get_volume(s, 0))) {
344         for (i = 0; i < s->audio_data_available[0] / 2; i++) {
345             s->temp_buffer[i] = (int64_t)(s->audio_buffer_0[i])
346                               * xlnx_dp_audio_get_volume(s, 0) / 8192;
347         }
348         s->byte_left = s->audio_data_available[0];
349     } else {
350         memset(s->temp_buffer, 0, s->audio_data_available[1] / 2);
351     }
352 
353     if ((s->audio_data_available[1]) && (xlnx_dp_audio_get_volume(s, 1))) {
354         if ((s->audio_data_available[0] == 0)
355         || (s->audio_data_available[1] == s->audio_data_available[0])) {
356             for (i = 0; i < s->audio_data_available[1] / 2; i++) {
357                 s->temp_buffer[i] += (int64_t)(s->audio_buffer_1[i])
358                                    * xlnx_dp_audio_get_volume(s, 1) / 8192;
359             }
360             s->byte_left = s->audio_data_available[1];
361         }
362     }
363 
364     for (i = 0; i < s->byte_left / 2; i++) {
365         s->out_buffer[i] = MAX(-32767, MIN(s->temp_buffer[i], 32767));
366     }
367 
368     s->data_ptr = 0;
369 }
370 
371 static void xlnx_dp_audio_callback(void *opaque, int avail)
372 {
373     /*
374      * Get some data from the DPDMA and compute these datas.
375      * Then wait for QEMU's audio subsystem to call this callback.
376      */
377     XlnxDPState *s = XLNX_DP(opaque);
378     size_t written = 0;
379 
380     /* If there are already some data don't get more data. */
381     if (s->byte_left == 0) {
382         s->audio_data_available[0] = xlnx_dpdma_start_operation(s->dpdma, 4,
383                                                                   true);
384         s->audio_data_available[1] = xlnx_dpdma_start_operation(s->dpdma, 5,
385                                                                   true);
386         xlnx_dp_audio_mix_buffer(s);
387     }
388 
389     /* Send the buffer through the audio. */
390     if (s->byte_left <= MAX_QEMU_BUFFER_SIZE) {
391         if (s->byte_left != 0) {
392             written = AUD_write(s->amixer_output_stream,
393                                 &s->out_buffer[s->data_ptr], s->byte_left);
394         } else {
395             /*
396              * There is nothing to play.. We don't have any data! Fill the
397              * buffer with zero's and send it.
398              */
399             written = 0;
400             memset(s->out_buffer, 0, 1024);
401             AUD_write(s->amixer_output_stream, s->out_buffer, 1024);
402         }
403     } else {
404         written = AUD_write(s->amixer_output_stream,
405                             &s->out_buffer[s->data_ptr], MAX_QEMU_BUFFER_SIZE);
406     }
407     s->byte_left -= written;
408     s->data_ptr += written;
409 }
410 
411 /*
412  * AUX channel related function.
413  */
414 static void xlnx_dp_aux_clear_rx_fifo(XlnxDPState *s)
415 {
416     fifo8_reset(&s->rx_fifo);
417 }
418 
419 static void xlnx_dp_aux_push_rx_fifo(XlnxDPState *s, uint8_t *buf, size_t len)
420 {
421     DPRINTF("Push %u data in rx_fifo\n", (unsigned)len);
422     fifo8_push_all(&s->rx_fifo, buf, len);
423 }
424 
425 static uint8_t xlnx_dp_aux_pop_rx_fifo(XlnxDPState *s)
426 {
427     uint8_t ret;
428 
429     if (fifo8_is_empty(&s->rx_fifo)) {
430         qemu_log_mask(LOG_GUEST_ERROR,
431                       "%s: Reading empty RX_FIFO\n",
432                       __func__);
433         /*
434          * The datasheet is not clear about the reset value, it seems
435          * to be unspecified. We choose to return '0'.
436          */
437         ret = 0;
438     } else {
439         ret = fifo8_pop(&s->rx_fifo);
440         DPRINTF("pop 0x%" PRIX8 " from rx_fifo.\n", ret);
441     }
442     return ret;
443 }
444 
445 static void xlnx_dp_aux_clear_tx_fifo(XlnxDPState *s)
446 {
447     fifo8_reset(&s->tx_fifo);
448 }
449 
450 static void xlnx_dp_aux_push_tx_fifo(XlnxDPState *s, uint8_t *buf, size_t len)
451 {
452     DPRINTF("Push %u data in tx_fifo\n", (unsigned)len);
453     fifo8_push_all(&s->tx_fifo, buf, len);
454 }
455 
456 static uint8_t xlnx_dp_aux_pop_tx_fifo(XlnxDPState *s)
457 {
458     uint8_t ret;
459 
460     if (fifo8_is_empty(&s->tx_fifo)) {
461         DPRINTF("tx_fifo underflow..\n");
462         abort();
463     }
464     ret = fifo8_pop(&s->tx_fifo);
465     DPRINTF("pop 0x%2.2X from tx_fifo.\n", ret);
466     return ret;
467 }
468 
469 static uint32_t xlnx_dp_aux_get_address(XlnxDPState *s)
470 {
471     return s->core_registers[DP_AUX_ADDRESS];
472 }
473 
474 /*
475  * Get command from the register.
476  */
477 static void xlnx_dp_aux_set_command(XlnxDPState *s, uint32_t value)
478 {
479     bool address_only = (value & AUX_ADDR_ONLY_MASK) != 0;
480     AUXCommand cmd = (value & AUX_COMMAND_MASK) >> AUX_COMMAND_SHIFT;
481     uint8_t nbytes = (value & AUX_COMMAND_NBYTES) + 1;
482     uint8_t buf[16];
483     int i;
484 
485     /*
486      * When an address_only command is executed nothing happen to the fifo, so
487      * just make nbytes = 0.
488      */
489     if (address_only) {
490         nbytes = 0;
491     }
492 
493     switch (cmd) {
494     case READ_AUX:
495     case READ_I2C:
496     case READ_I2C_MOT:
497         s->core_registers[DP_AUX_REPLY_CODE] = aux_request(s->aux_bus, cmd,
498                                                xlnx_dp_aux_get_address(s),
499                                                nbytes, buf);
500         s->core_registers[DP_REPLY_DATA_COUNT] = nbytes;
501 
502         if (s->core_registers[DP_AUX_REPLY_CODE] == AUX_I2C_ACK) {
503             xlnx_dp_aux_push_rx_fifo(s, buf, nbytes);
504         }
505         break;
506     case WRITE_AUX:
507     case WRITE_I2C:
508     case WRITE_I2C_MOT:
509         for (i = 0; i < nbytes; i++) {
510             buf[i] = xlnx_dp_aux_pop_tx_fifo(s);
511         }
512         s->core_registers[DP_AUX_REPLY_CODE] = aux_request(s->aux_bus, cmd,
513                                                xlnx_dp_aux_get_address(s),
514                                                nbytes, buf);
515         xlnx_dp_aux_clear_tx_fifo(s);
516         break;
517     case WRITE_I2C_STATUS:
518         qemu_log_mask(LOG_UNIMP, "xlnx_dp: Write i2c status not implemented\n");
519         break;
520     default:
521         abort();
522     }
523 
524     s->core_registers[DP_INTERRUPT_SIGNAL_STATE] |= 0x04;
525 }
526 
527 static void xlnx_dp_set_dpdma(const Object *obj, const char *name, Object *val,
528                               Error **errp)
529 {
530     XlnxDPState *s = XLNX_DP(obj);
531     if (s->console) {
532         DisplaySurface *surface = qemu_console_surface(s->console);
533         XlnxDPDMAState *dma = XLNX_DPDMA(val);
534         xlnx_dpdma_set_host_data_location(dma, DP_GRAPHIC_DMA_CHANNEL,
535                                           surface_data(surface));
536     }
537 }
538 
539 static inline uint8_t xlnx_dp_global_alpha_value(XlnxDPState *s)
540 {
541     return (s->vblend_registers[V_BLEND_SET_GLOBAL_ALPHA_REG] & 0x1FE) >> 1;
542 }
543 
544 static inline bool xlnx_dp_global_alpha_enabled(XlnxDPState *s)
545 {
546     /*
547      * If the alpha is totally opaque (255) we consider the alpha is disabled to
548      * reduce CPU consumption.
549      */
550     return ((xlnx_dp_global_alpha_value(s) != 0xFF) &&
551            ((s->vblend_registers[V_BLEND_SET_GLOBAL_ALPHA_REG] & 0x01) != 0));
552 }
553 
554 static void xlnx_dp_recreate_surface(XlnxDPState *s)
555 {
556     /*
557      * Two possibilities, if blending is enabled the console displays
558      * bout_plane, if not g_plane is displayed.
559      */
560     uint16_t width = s->core_registers[DP_MAIN_STREAM_HRES];
561     uint16_t height = s->core_registers[DP_MAIN_STREAM_VRES];
562     DisplaySurface *current_console_surface = qemu_console_surface(s->console);
563 
564     if ((width != 0) && (height != 0)) {
565         /*
566          * As dpy_gfx_replace_surface calls qemu_free_displaysurface on the
567          * surface we need to be careful and don't free the surface associated
568          * to the console or double free will happen.
569          */
570         if (s->bout_plane.surface != current_console_surface) {
571             qemu_free_displaysurface(s->bout_plane.surface);
572         }
573         if (s->v_plane.surface != current_console_surface) {
574             qemu_free_displaysurface(s->v_plane.surface);
575         }
576         if (s->g_plane.surface != current_console_surface) {
577             qemu_free_displaysurface(s->g_plane.surface);
578         }
579 
580         s->g_plane.surface
581                 = qemu_create_displaysurface_from(width, height,
582                                                   s->g_plane.format, 0, NULL);
583         s->v_plane.surface
584                 = qemu_create_displaysurface_from(width, height,
585                                                   s->v_plane.format, 0, NULL);
586         if (xlnx_dp_global_alpha_enabled(s)) {
587             s->bout_plane.surface =
588                             qemu_create_displaysurface_from(width,
589                                                             height,
590                                                             s->g_plane.format,
591                                                             0, NULL);
592             dpy_gfx_replace_surface(s->console, s->bout_plane.surface);
593         } else {
594             s->bout_plane.surface = NULL;
595             dpy_gfx_replace_surface(s->console, s->g_plane.surface);
596         }
597 
598         xlnx_dpdma_set_host_data_location(s->dpdma, DP_GRAPHIC_DMA_CHANNEL,
599                                             surface_data(s->g_plane.surface));
600         xlnx_dpdma_set_host_data_location(s->dpdma, DP_VIDEO_DMA_CHANNEL,
601                                             surface_data(s->v_plane.surface));
602     }
603 }
604 
605 /*
606  * Change the graphic format of the surface.
607  */
608 static void xlnx_dp_change_graphic_fmt(XlnxDPState *s)
609 {
610     switch (s->avbufm_registers[AV_BUF_FORMAT] & DP_GRAPHIC_MASK) {
611     case DP_GRAPHIC_RGBA8888:
612         s->g_plane.format = PIXMAN_r8g8b8a8;
613         break;
614     case DP_GRAPHIC_ABGR8888:
615         s->g_plane.format = PIXMAN_a8b8g8r8;
616         break;
617     case DP_GRAPHIC_RGB565:
618         s->g_plane.format = PIXMAN_r5g6b5;
619         break;
620     case DP_GRAPHIC_RGB888:
621         s->g_plane.format = PIXMAN_r8g8b8;
622         break;
623     case DP_GRAPHIC_BGR888:
624         s->g_plane.format = PIXMAN_b8g8r8;
625         break;
626     default:
627         DPRINTF("error: unsupported graphic format %u.\n",
628                 s->avbufm_registers[AV_BUF_FORMAT] & DP_GRAPHIC_MASK);
629         abort();
630     }
631 
632     switch (s->avbufm_registers[AV_BUF_FORMAT] & DP_NL_VID_FMT_MASK) {
633     case 0:
634         s->v_plane.format = PIXMAN_x8b8g8r8;
635         break;
636     case DP_NL_VID_Y0_CB_Y1_CR:
637         s->v_plane.format = PIXMAN_yuy2;
638         break;
639     case DP_NL_VID_RGBA8880:
640         s->v_plane.format = PIXMAN_x8b8g8r8;
641         break;
642     default:
643         DPRINTF("error: unsupported video format %u.\n",
644                 s->avbufm_registers[AV_BUF_FORMAT] & DP_NL_VID_FMT_MASK);
645         abort();
646     }
647 
648     xlnx_dp_recreate_surface(s);
649 }
650 
651 static void xlnx_dp_update_irq(XlnxDPState *s)
652 {
653     uint32_t flags;
654 
655     flags = s->core_registers[DP_INT_STATUS] & ~s->core_registers[DP_INT_MASK];
656     DPRINTF("update IRQ value = %" PRIx32 "\n", flags);
657     qemu_set_irq(s->irq, flags != 0);
658 }
659 
660 static uint64_t xlnx_dp_read(void *opaque, hwaddr offset, unsigned size)
661 {
662     XlnxDPState *s = XLNX_DP(opaque);
663     uint64_t ret = 0;
664 
665     offset = offset >> 2;
666 
667     switch (offset) {
668     case DP_TX_USER_FIFO_OVERFLOW:
669         /* This register is cleared after a read */
670         ret = s->core_registers[DP_TX_USER_FIFO_OVERFLOW];
671         s->core_registers[DP_TX_USER_FIFO_OVERFLOW] = 0;
672         break;
673     case DP_AUX_REPLY_DATA:
674         ret = xlnx_dp_aux_pop_rx_fifo(s);
675         break;
676     case DP_INTERRUPT_SIGNAL_STATE:
677         /*
678          * XXX: Not sure it is the right thing to do actually.
679          * The register is not written by the device driver so it's stuck
680          * to 0x04.
681          */
682         ret = s->core_registers[DP_INTERRUPT_SIGNAL_STATE];
683         s->core_registers[DP_INTERRUPT_SIGNAL_STATE] &= ~0x04;
684         break;
685     case DP_AUX_WRITE_FIFO:
686     case DP_TX_AUDIO_INFO_DATA(0):
687     case DP_TX_AUDIO_INFO_DATA(1):
688     case DP_TX_AUDIO_INFO_DATA(2):
689     case DP_TX_AUDIO_INFO_DATA(3):
690     case DP_TX_AUDIO_INFO_DATA(4):
691     case DP_TX_AUDIO_INFO_DATA(5):
692     case DP_TX_AUDIO_INFO_DATA(6):
693     case DP_TX_AUDIO_INFO_DATA(7):
694     case DP_TX_AUDIO_EXT_DATA(0):
695     case DP_TX_AUDIO_EXT_DATA(1):
696     case DP_TX_AUDIO_EXT_DATA(2):
697     case DP_TX_AUDIO_EXT_DATA(3):
698     case DP_TX_AUDIO_EXT_DATA(4):
699     case DP_TX_AUDIO_EXT_DATA(5):
700     case DP_TX_AUDIO_EXT_DATA(6):
701     case DP_TX_AUDIO_EXT_DATA(7):
702     case DP_TX_AUDIO_EXT_DATA(8):
703         /* write only registers */
704         ret = 0;
705         break;
706     default:
707         assert(offset <= (0x3AC >> 2));
708         ret = s->core_registers[offset];
709         break;
710     }
711 
712     DPRINTF("core read @%" PRIx64 " = 0x%8.8" PRIX64 "\n", offset << 2, ret);
713     return ret;
714 }
715 
716 static void xlnx_dp_write(void *opaque, hwaddr offset, uint64_t value,
717                           unsigned size)
718 {
719     XlnxDPState *s = XLNX_DP(opaque);
720 
721     DPRINTF("core write @%" PRIx64 " = 0x%8.8" PRIX64 "\n", offset, value);
722 
723     offset = offset >> 2;
724 
725     switch (offset) {
726     /*
727      * Only special write case are handled.
728      */
729     case DP_LINK_BW_SET:
730         s->core_registers[offset] = value & 0x000000FF;
731         break;
732     case DP_LANE_COUNT_SET:
733     case DP_MAIN_STREAM_MISC0:
734         s->core_registers[offset] = value & 0x0000000F;
735         break;
736     case DP_TRAINING_PATTERN_SET:
737     case DP_LINK_QUAL_PATTERN_SET:
738     case DP_MAIN_STREAM_POLARITY:
739     case DP_PHY_VOLTAGE_DIFF_LANE_0:
740     case DP_PHY_VOLTAGE_DIFF_LANE_1:
741         s->core_registers[offset] = value & 0x00000003;
742         break;
743     case DP_ENHANCED_FRAME_EN:
744     case DP_SCRAMBLING_DISABLE:
745     case DP_DOWNSPREAD_CTRL:
746     case DP_MAIN_STREAM_ENABLE:
747     case DP_TRANSMIT_PRBS7:
748         s->core_registers[offset] = value & 0x00000001;
749         break;
750     case DP_PHY_CLOCK_SELECT:
751         s->core_registers[offset] = value & 0x00000007;
752         break;
753     case DP_SOFTWARE_RESET:
754         /*
755          * No need to update this bit as it's read '0'.
756          */
757         /*
758          * TODO: reset IP.
759          */
760         break;
761     case DP_TRANSMITTER_ENABLE:
762         s->core_registers[offset] = value & 0x01;
763         break;
764     case DP_FORCE_SCRAMBLER_RESET:
765         /*
766          * No need to update this bit as it's read '0'.
767          */
768         /*
769          * TODO: force a scrambler reset??
770          */
771         break;
772     case DP_AUX_COMMAND_REGISTER:
773         s->core_registers[offset] = value & 0x00001F0F;
774         xlnx_dp_aux_set_command(s, s->core_registers[offset]);
775         break;
776     case DP_MAIN_STREAM_HTOTAL:
777     case DP_MAIN_STREAM_VTOTAL:
778     case DP_MAIN_STREAM_HSTART:
779     case DP_MAIN_STREAM_VSTART:
780         s->core_registers[offset] = value & 0x0000FFFF;
781         break;
782     case DP_MAIN_STREAM_HRES:
783     case DP_MAIN_STREAM_VRES:
784         s->core_registers[offset] = value & 0x0000FFFF;
785         xlnx_dp_recreate_surface(s);
786         break;
787     case DP_MAIN_STREAM_HSWIDTH:
788     case DP_MAIN_STREAM_VSWIDTH:
789         s->core_registers[offset] = value & 0x00007FFF;
790         break;
791     case DP_MAIN_STREAM_MISC1:
792         s->core_registers[offset] = value & 0x00000086;
793         break;
794     case DP_MAIN_STREAM_M_VID:
795     case DP_MAIN_STREAM_N_VID:
796         s->core_registers[offset] = value & 0x00FFFFFF;
797         break;
798     case DP_MSA_TRANSFER_UNIT_SIZE:
799     case DP_MIN_BYTES_PER_TU:
800     case DP_INIT_WAIT:
801         s->core_registers[offset] = value & 0x00000007;
802         break;
803     case DP_USER_DATA_COUNT_PER_LANE:
804         s->core_registers[offset] = value & 0x0003FFFF;
805         break;
806     case DP_FRAC_BYTES_PER_TU:
807         s->core_registers[offset] = value & 0x000003FF;
808         break;
809     case DP_PHY_RESET:
810         s->core_registers[offset] = value & 0x00010003;
811         /*
812          * TODO: Reset something?
813          */
814         break;
815     case DP_TX_PHY_POWER_DOWN:
816         s->core_registers[offset] = value & 0x0000000F;
817         /*
818          * TODO: Power down things?
819          */
820         break;
821     case DP_AUX_WRITE_FIFO: {
822         uint8_t c = value;
823         xlnx_dp_aux_push_tx_fifo(s, &c, 1);
824         break;
825     }
826     case DP_AUX_CLOCK_DIVIDER:
827         break;
828     case DP_AUX_REPLY_COUNT:
829         /*
830          * Writing to this register clear the counter.
831          */
832         s->core_registers[offset] = 0x00000000;
833         break;
834     case DP_AUX_ADDRESS:
835         s->core_registers[offset] = value & 0x000FFFFF;
836         break;
837     case DP_VERSION_REGISTER:
838     case DP_CORE_ID:
839     case DP_TX_USER_FIFO_OVERFLOW:
840     case DP_AUX_REPLY_DATA:
841     case DP_AUX_REPLY_CODE:
842     case DP_REPLY_DATA_COUNT:
843     case DP_REPLY_STATUS:
844     case DP_HPD_DURATION:
845         /*
846          * Write to read only location..
847          */
848         break;
849     case DP_TX_AUDIO_CONTROL:
850         s->core_registers[offset] = value & 0x00000001;
851         xlnx_dp_audio_activate(s);
852         break;
853     case DP_TX_AUDIO_CHANNELS:
854         s->core_registers[offset] = value & 0x00000007;
855         xlnx_dp_audio_activate(s);
856         break;
857     case DP_INT_STATUS:
858         s->core_registers[DP_INT_STATUS] &= ~value;
859         xlnx_dp_update_irq(s);
860         break;
861     case DP_INT_EN:
862         s->core_registers[DP_INT_MASK] &= ~value;
863         xlnx_dp_update_irq(s);
864         break;
865     case DP_INT_DS:
866         s->core_registers[DP_INT_MASK] |= ~value;
867         xlnx_dp_update_irq(s);
868         break;
869     default:
870         assert(offset <= (0x504C >> 2));
871         s->core_registers[offset] = value;
872         break;
873     }
874 }
875 
876 static const MemoryRegionOps dp_ops = {
877     .read = xlnx_dp_read,
878     .write = xlnx_dp_write,
879     .endianness = DEVICE_NATIVE_ENDIAN,
880     .valid = {
881         .min_access_size = 4,
882         .max_access_size = 4,
883     },
884     .impl = {
885         .min_access_size = 4,
886         .max_access_size = 4,
887     },
888 };
889 
890 /*
891  * This is to handle Read/Write to the Video Blender.
892  */
893 static void xlnx_dp_vblend_write(void *opaque, hwaddr offset,
894                                  uint64_t value, unsigned size)
895 {
896     XlnxDPState *s = XLNX_DP(opaque);
897     bool alpha_was_enabled;
898 
899     DPRINTF("vblend: write @0x%" HWADDR_PRIX " = 0x%" PRIX32 "\n", offset,
900                                                                (uint32_t)value);
901     offset = offset >> 2;
902 
903     switch (offset) {
904     case V_BLEND_BG_CLR_0:
905     case V_BLEND_BG_CLR_1:
906     case V_BLEND_BG_CLR_2:
907         s->vblend_registers[offset] = value & 0x00000FFF;
908         break;
909     case V_BLEND_SET_GLOBAL_ALPHA_REG:
910         /*
911          * A write to this register can enable or disable blending. Thus we need
912          * to recreate the surfaces.
913          */
914         alpha_was_enabled = xlnx_dp_global_alpha_enabled(s);
915         s->vblend_registers[offset] = value & 0x000001FF;
916         if (xlnx_dp_global_alpha_enabled(s) != alpha_was_enabled) {
917             xlnx_dp_recreate_surface(s);
918         }
919         break;
920     case V_BLEND_OUTPUT_VID_FORMAT:
921         s->vblend_registers[offset] = value & 0x00000017;
922         break;
923     case V_BLEND_LAYER0_CONTROL:
924     case V_BLEND_LAYER1_CONTROL:
925         s->vblend_registers[offset] = value & 0x00000103;
926         break;
927     case V_BLEND_RGB2YCBCR_COEFF(0):
928     case V_BLEND_RGB2YCBCR_COEFF(1):
929     case V_BLEND_RGB2YCBCR_COEFF(2):
930     case V_BLEND_RGB2YCBCR_COEFF(3):
931     case V_BLEND_RGB2YCBCR_COEFF(4):
932     case V_BLEND_RGB2YCBCR_COEFF(5):
933     case V_BLEND_RGB2YCBCR_COEFF(6):
934     case V_BLEND_RGB2YCBCR_COEFF(7):
935     case V_BLEND_RGB2YCBCR_COEFF(8):
936     case V_BLEND_IN1CSC_COEFF(0):
937     case V_BLEND_IN1CSC_COEFF(1):
938     case V_BLEND_IN1CSC_COEFF(2):
939     case V_BLEND_IN1CSC_COEFF(3):
940     case V_BLEND_IN1CSC_COEFF(4):
941     case V_BLEND_IN1CSC_COEFF(5):
942     case V_BLEND_IN1CSC_COEFF(6):
943     case V_BLEND_IN1CSC_COEFF(7):
944     case V_BLEND_IN1CSC_COEFF(8):
945     case V_BLEND_IN2CSC_COEFF(0):
946     case V_BLEND_IN2CSC_COEFF(1):
947     case V_BLEND_IN2CSC_COEFF(2):
948     case V_BLEND_IN2CSC_COEFF(3):
949     case V_BLEND_IN2CSC_COEFF(4):
950     case V_BLEND_IN2CSC_COEFF(5):
951     case V_BLEND_IN2CSC_COEFF(6):
952     case V_BLEND_IN2CSC_COEFF(7):
953     case V_BLEND_IN2CSC_COEFF(8):
954         s->vblend_registers[offset] = value & 0x0000FFFF;
955         break;
956     case V_BLEND_LUMA_IN1CSC_OFFSET:
957     case V_BLEND_CR_IN1CSC_OFFSET:
958     case V_BLEND_CB_IN1CSC_OFFSET:
959     case V_BLEND_LUMA_IN2CSC_OFFSET:
960     case V_BLEND_CR_IN2CSC_OFFSET:
961     case V_BLEND_CB_IN2CSC_OFFSET:
962     case V_BLEND_LUMA_OUTCSC_OFFSET:
963     case V_BLEND_CR_OUTCSC_OFFSET:
964     case V_BLEND_CB_OUTCSC_OFFSET:
965         s->vblend_registers[offset] = value & 0x3FFF7FFF;
966         break;
967     case V_BLEND_CHROMA_KEY_ENABLE:
968         s->vblend_registers[offset] = value & 0x00000003;
969         break;
970     case V_BLEND_CHROMA_KEY_COMP1:
971     case V_BLEND_CHROMA_KEY_COMP2:
972     case V_BLEND_CHROMA_KEY_COMP3:
973         s->vblend_registers[offset] = value & 0x0FFF0FFF;
974         break;
975     default:
976         s->vblend_registers[offset] = value;
977         break;
978     }
979 }
980 
981 static uint64_t xlnx_dp_vblend_read(void *opaque, hwaddr offset,
982                                     unsigned size)
983 {
984     XlnxDPState *s = XLNX_DP(opaque);
985 
986     DPRINTF("vblend: read @0x%" HWADDR_PRIX " = 0x%" PRIX32 "\n", offset,
987             s->vblend_registers[offset >> 2]);
988     return s->vblend_registers[offset >> 2];
989 }
990 
991 static const MemoryRegionOps vblend_ops = {
992     .read = xlnx_dp_vblend_read,
993     .write = xlnx_dp_vblend_write,
994     .endianness = DEVICE_NATIVE_ENDIAN,
995     .valid = {
996         .min_access_size = 4,
997         .max_access_size = 4,
998     },
999     .impl = {
1000         .min_access_size = 4,
1001         .max_access_size = 4,
1002     },
1003 };
1004 
1005 /*
1006  * This is to handle Read/Write to the Audio Video buffer manager.
1007  */
1008 static void xlnx_dp_avbufm_write(void *opaque, hwaddr offset, uint64_t value,
1009                                  unsigned size)
1010 {
1011     XlnxDPState *s = XLNX_DP(opaque);
1012 
1013     DPRINTF("avbufm: write @0x%" HWADDR_PRIX " = 0x%" PRIX32 "\n", offset,
1014                                                                (uint32_t)value);
1015     offset = offset >> 2;
1016 
1017     switch (offset) {
1018     case AV_BUF_FORMAT:
1019         s->avbufm_registers[offset] = value & 0x00000FFF;
1020         xlnx_dp_change_graphic_fmt(s);
1021         break;
1022     case AV_CHBUF0:
1023     case AV_CHBUF1:
1024     case AV_CHBUF2:
1025     case AV_CHBUF3:
1026     case AV_CHBUF4:
1027     case AV_CHBUF5:
1028         s->avbufm_registers[offset] = value & 0x0000007F;
1029         break;
1030     case AV_BUF_OUTPUT_AUDIO_VIDEO_SELECT:
1031         s->avbufm_registers[offset] = value & 0x0000007F;
1032         break;
1033     case AV_BUF_DITHER_CONFIG:
1034         s->avbufm_registers[offset] = value & 0x000007FF;
1035         break;
1036     case AV_BUF_DITHER_CONFIG_MAX:
1037     case AV_BUF_DITHER_CONFIG_MIN:
1038         s->avbufm_registers[offset] = value & 0x00000FFF;
1039         break;
1040     case AV_BUF_PATTERN_GEN_SELECT:
1041         s->avbufm_registers[offset] = value & 0xFFFFFF03;
1042         break;
1043     case AV_BUF_AUD_VID_CLK_SOURCE:
1044         s->avbufm_registers[offset] = value & 0x00000007;
1045         break;
1046     case AV_BUF_SRST_REG:
1047         s->avbufm_registers[offset] = value & 0x00000002;
1048         break;
1049     case AV_BUF_AUDIO_CH_CONFIG:
1050         s->avbufm_registers[offset] = value & 0x00000003;
1051         break;
1052     case AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(0):
1053     case AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(1):
1054     case AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(2):
1055     case AV_BUF_VIDEO_COMP_SCALE_FACTOR(0):
1056     case AV_BUF_VIDEO_COMP_SCALE_FACTOR(1):
1057     case AV_BUF_VIDEO_COMP_SCALE_FACTOR(2):
1058         s->avbufm_registers[offset] = value & 0x0000FFFF;
1059         break;
1060     case AV_BUF_LIVE_VIDEO_COMP_SF(0):
1061     case AV_BUF_LIVE_VIDEO_COMP_SF(1):
1062     case AV_BUF_LIVE_VIDEO_COMP_SF(2):
1063     case AV_BUF_LIVE_VID_CONFIG:
1064     case AV_BUF_LIVE_GFX_COMP_SF(0):
1065     case AV_BUF_LIVE_GFX_COMP_SF(1):
1066     case AV_BUF_LIVE_GFX_COMP_SF(2):
1067     case AV_BUF_LIVE_GFX_CONFIG:
1068     case AV_BUF_NON_LIVE_LATENCY:
1069     case AV_BUF_STC_CONTROL:
1070     case AV_BUF_STC_INIT_VALUE0:
1071     case AV_BUF_STC_INIT_VALUE1:
1072     case AV_BUF_STC_ADJ:
1073     case AV_BUF_STC_VIDEO_VSYNC_TS_REG0:
1074     case AV_BUF_STC_VIDEO_VSYNC_TS_REG1:
1075     case AV_BUF_STC_EXT_VSYNC_TS_REG0:
1076     case AV_BUF_STC_EXT_VSYNC_TS_REG1:
1077     case AV_BUF_STC_CUSTOM_EVENT_TS_REG0:
1078     case AV_BUF_STC_CUSTOM_EVENT_TS_REG1:
1079     case AV_BUF_STC_CUSTOM_EVENT2_TS_REG0:
1080     case AV_BUF_STC_CUSTOM_EVENT2_TS_REG1:
1081     case AV_BUF_STC_SNAPSHOT0:
1082     case AV_BUF_STC_SNAPSHOT1:
1083     case AV_BUF_HCOUNT_VCOUNT_INT0:
1084     case AV_BUF_HCOUNT_VCOUNT_INT1:
1085         qemu_log_mask(LOG_UNIMP, "avbufm: unimplemented register 0x%04"
1086                                  PRIx64 "\n",
1087                       offset << 2);
1088         break;
1089     default:
1090         s->avbufm_registers[offset] = value;
1091         break;
1092     }
1093 }
1094 
1095 static uint64_t xlnx_dp_avbufm_read(void *opaque, hwaddr offset,
1096                                     unsigned size)
1097 {
1098     XlnxDPState *s = XLNX_DP(opaque);
1099 
1100     offset = offset >> 2;
1101     return s->avbufm_registers[offset];
1102 }
1103 
1104 static const MemoryRegionOps avbufm_ops = {
1105     .read = xlnx_dp_avbufm_read,
1106     .write = xlnx_dp_avbufm_write,
1107     .endianness = DEVICE_NATIVE_ENDIAN,
1108     .valid = {
1109         .min_access_size = 4,
1110         .max_access_size = 4,
1111     },
1112     .impl = {
1113         .min_access_size = 4,
1114         .max_access_size = 4,
1115     },
1116 };
1117 
1118 /*
1119  * This is a global alpha blending using pixman.
1120  * Both graphic and video planes are multiplied with the global alpha
1121  * coefficient and added.
1122  */
1123 static inline void xlnx_dp_blend_surface(XlnxDPState *s)
1124 {
1125     pixman_fixed_t alpha1[] = { pixman_double_to_fixed(1),
1126                                 pixman_double_to_fixed(1),
1127                                 pixman_double_to_fixed(1.0) };
1128     pixman_fixed_t alpha2[] = { pixman_double_to_fixed(1),
1129                                 pixman_double_to_fixed(1),
1130                                 pixman_double_to_fixed(1.0) };
1131 
1132     if ((surface_width(s->g_plane.surface)
1133          != surface_width(s->v_plane.surface)) ||
1134         (surface_height(s->g_plane.surface)
1135          != surface_height(s->v_plane.surface))) {
1136         return;
1137     }
1138 
1139     alpha1[2] = pixman_double_to_fixed((double)(xlnx_dp_global_alpha_value(s))
1140                                        / 256.0);
1141     alpha2[2] = pixman_double_to_fixed((255.0
1142                                     - (double)xlnx_dp_global_alpha_value(s))
1143                                        / 256.0);
1144 
1145     pixman_image_set_filter(s->g_plane.surface->image,
1146                             PIXMAN_FILTER_CONVOLUTION, alpha1, 3);
1147     pixman_image_composite(PIXMAN_OP_SRC, s->g_plane.surface->image, 0,
1148                            s->bout_plane.surface->image, 0, 0, 0, 0, 0, 0,
1149                            surface_width(s->g_plane.surface),
1150                            surface_height(s->g_plane.surface));
1151     pixman_image_set_filter(s->v_plane.surface->image,
1152                             PIXMAN_FILTER_CONVOLUTION, alpha2, 3);
1153     pixman_image_composite(PIXMAN_OP_ADD, s->v_plane.surface->image, 0,
1154                            s->bout_plane.surface->image, 0, 0, 0, 0, 0, 0,
1155                            surface_width(s->g_plane.surface),
1156                            surface_height(s->g_plane.surface));
1157 }
1158 
1159 static void xlnx_dp_update_display(void *opaque)
1160 {
1161     XlnxDPState *s = XLNX_DP(opaque);
1162 
1163     if ((s->core_registers[DP_TRANSMITTER_ENABLE] & 0x01) == 0) {
1164         return;
1165     }
1166 
1167     s->core_registers[DP_INT_STATUS] |= (1 << 13);
1168     xlnx_dp_update_irq(s);
1169 
1170     xlnx_dpdma_trigger_vsync_irq(s->dpdma);
1171 
1172     /*
1173      * Trigger the DMA channel.
1174      */
1175     if (!xlnx_dpdma_start_operation(s->dpdma, 3, false)) {
1176         /*
1177          * An error occurred don't do anything with the data..
1178          * Trigger an underflow interrupt.
1179          */
1180         s->core_registers[DP_INT_STATUS] |= (1 << 21);
1181         xlnx_dp_update_irq(s);
1182         return;
1183     }
1184 
1185     if (xlnx_dp_global_alpha_enabled(s)) {
1186         if (!xlnx_dpdma_start_operation(s->dpdma, 0, false)) {
1187             s->core_registers[DP_INT_STATUS] |= (1 << 21);
1188             xlnx_dp_update_irq(s);
1189             return;
1190         }
1191         xlnx_dp_blend_surface(s);
1192     }
1193 
1194     /*
1195      * XXX: We might want to update only what changed.
1196      */
1197     dpy_gfx_update_full(s->console);
1198 }
1199 
1200 static const GraphicHwOps xlnx_dp_gfx_ops = {
1201     .gfx_update  = xlnx_dp_update_display,
1202 };
1203 
1204 static void xlnx_dp_init(Object *obj)
1205 {
1206     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
1207     XlnxDPState *s = XLNX_DP(obj);
1208 
1209     memory_region_init(&s->container, obj, TYPE_XLNX_DP, 0xC050);
1210 
1211     memory_region_init_io(&s->core_iomem, obj, &dp_ops, s, TYPE_XLNX_DP
1212                           ".core", 0x3AF);
1213     memory_region_add_subregion(&s->container, 0x0000, &s->core_iomem);
1214 
1215     memory_region_init_io(&s->vblend_iomem, obj, &vblend_ops, s, TYPE_XLNX_DP
1216                           ".v_blend", 0x1DF);
1217     memory_region_add_subregion(&s->container, 0xA000, &s->vblend_iomem);
1218 
1219     memory_region_init_io(&s->avbufm_iomem, obj, &avbufm_ops, s, TYPE_XLNX_DP
1220                           ".av_buffer_manager", 0x238);
1221     memory_region_add_subregion(&s->container, 0xB000, &s->avbufm_iomem);
1222 
1223     memory_region_init_io(&s->audio_iomem, obj, &audio_ops, s, TYPE_XLNX_DP
1224                           ".audio", sizeof(s->audio_registers));
1225     memory_region_add_subregion(&s->container, 0xC000, &s->audio_iomem);
1226 
1227     sysbus_init_mmio(sbd, &s->container);
1228     sysbus_init_irq(sbd, &s->irq);
1229 
1230     object_property_add_link(obj, "dpdma", TYPE_XLNX_DPDMA,
1231                              (Object **) &s->dpdma,
1232                              xlnx_dp_set_dpdma,
1233                              OBJ_PROP_LINK_STRONG,
1234                              &error_abort);
1235 
1236     /*
1237      * Initialize AUX Bus.
1238      */
1239     s->aux_bus = aux_init_bus(DEVICE(obj), "aux");
1240 
1241     /*
1242      * Initialize DPCD and EDID..
1243      */
1244     s->dpcd = DPCD(aux_create_slave(s->aux_bus, "dpcd"));
1245     object_property_add_child(OBJECT(s), "dpcd", OBJECT(s->dpcd), NULL);
1246 
1247     s->edid = I2CDDC(qdev_create(BUS(aux_get_i2c_bus(s->aux_bus)), "i2c-ddc"));
1248     i2c_set_slave_address(I2C_SLAVE(s->edid), 0x50);
1249     object_property_add_child(OBJECT(s), "edid", OBJECT(s->edid), NULL);
1250 
1251     fifo8_create(&s->rx_fifo, 16);
1252     fifo8_create(&s->tx_fifo, 16);
1253 }
1254 
1255 static void xlnx_dp_realize(DeviceState *dev, Error **errp)
1256 {
1257     XlnxDPState *s = XLNX_DP(dev);
1258     DisplaySurface *surface;
1259     struct audsettings as;
1260 
1261     qdev_init_nofail(DEVICE(s->dpcd));
1262     aux_map_slave(AUX_SLAVE(s->dpcd), 0x0000);
1263 
1264     s->console = graphic_console_init(dev, 0, &xlnx_dp_gfx_ops, s);
1265     surface = qemu_console_surface(s->console);
1266     xlnx_dpdma_set_host_data_location(s->dpdma, DP_GRAPHIC_DMA_CHANNEL,
1267                                       surface_data(surface));
1268 
1269     as.freq = 44100;
1270     as.nchannels = 2;
1271     as.fmt = AUDIO_FORMAT_S16;
1272     as.endianness = 0;
1273 
1274     AUD_register_card("xlnx_dp.audio", &s->aud_card);
1275 
1276     s->amixer_output_stream = AUD_open_out(&s->aud_card,
1277                                            s->amixer_output_stream,
1278                                            "xlnx_dp.audio.out",
1279                                            s,
1280                                            xlnx_dp_audio_callback,
1281                                            &as);
1282     AUD_set_volume_out(s->amixer_output_stream, 0, 255, 255);
1283     xlnx_dp_audio_activate(s);
1284 }
1285 
1286 static void xlnx_dp_reset(DeviceState *dev)
1287 {
1288     XlnxDPState *s = XLNX_DP(dev);
1289 
1290     memset(s->core_registers, 0, sizeof(s->core_registers));
1291     s->core_registers[DP_VERSION_REGISTER] = 0x04010000;
1292     s->core_registers[DP_CORE_ID] = 0x01020000;
1293     s->core_registers[DP_REPLY_STATUS] = 0x00000010;
1294     s->core_registers[DP_MSA_TRANSFER_UNIT_SIZE] = 0x00000040;
1295     s->core_registers[DP_INIT_WAIT] = 0x00000020;
1296     s->core_registers[DP_PHY_RESET] = 0x00010003;
1297     s->core_registers[DP_INT_MASK] = 0xFFFFF03F;
1298     s->core_registers[DP_PHY_STATUS] = 0x00000043;
1299     s->core_registers[DP_INTERRUPT_SIGNAL_STATE] = 0x00000001;
1300 
1301     s->vblend_registers[V_BLEND_RGB2YCBCR_COEFF(0)] = 0x00001000;
1302     s->vblend_registers[V_BLEND_RGB2YCBCR_COEFF(4)] = 0x00001000;
1303     s->vblend_registers[V_BLEND_RGB2YCBCR_COEFF(8)] = 0x00001000;
1304     s->vblend_registers[V_BLEND_IN1CSC_COEFF(0)] = 0x00001000;
1305     s->vblend_registers[V_BLEND_IN1CSC_COEFF(4)] = 0x00001000;
1306     s->vblend_registers[V_BLEND_IN1CSC_COEFF(8)] = 0x00001000;
1307     s->vblend_registers[V_BLEND_IN2CSC_COEFF(0)] = 0x00001000;
1308     s->vblend_registers[V_BLEND_IN2CSC_COEFF(4)] = 0x00001000;
1309     s->vblend_registers[V_BLEND_IN2CSC_COEFF(8)] = 0x00001000;
1310 
1311     s->avbufm_registers[AV_BUF_NON_LIVE_LATENCY] = 0x00000180;
1312     s->avbufm_registers[AV_BUF_OUTPUT_AUDIO_VIDEO_SELECT] = 0x00000008;
1313     s->avbufm_registers[AV_BUF_DITHER_CONFIG_MAX] = 0x00000FFF;
1314     s->avbufm_registers[AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(0)] = 0x00010101;
1315     s->avbufm_registers[AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(1)] = 0x00010101;
1316     s->avbufm_registers[AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(2)] = 0x00010101;
1317     s->avbufm_registers[AV_BUF_VIDEO_COMP_SCALE_FACTOR(0)] = 0x00010101;
1318     s->avbufm_registers[AV_BUF_VIDEO_COMP_SCALE_FACTOR(1)] = 0x00010101;
1319     s->avbufm_registers[AV_BUF_VIDEO_COMP_SCALE_FACTOR(2)] = 0x00010101;
1320     s->avbufm_registers[AV_BUF_LIVE_VIDEO_COMP_SF(0)] = 0x00010101;
1321     s->avbufm_registers[AV_BUF_LIVE_VIDEO_COMP_SF(1)] = 0x00010101;
1322     s->avbufm_registers[AV_BUF_LIVE_VIDEO_COMP_SF(2)] = 0x00010101;
1323     s->avbufm_registers[AV_BUF_LIVE_GFX_COMP_SF(0)] = 0x00010101;
1324     s->avbufm_registers[AV_BUF_LIVE_GFX_COMP_SF(1)] = 0x00010101;
1325     s->avbufm_registers[AV_BUF_LIVE_GFX_COMP_SF(2)] = 0x00010101;
1326 
1327     memset(s->audio_registers, 0, sizeof(s->audio_registers));
1328     s->byte_left = 0;
1329 
1330     xlnx_dp_aux_clear_rx_fifo(s);
1331     xlnx_dp_change_graphic_fmt(s);
1332     xlnx_dp_update_irq(s);
1333 }
1334 
1335 static void xlnx_dp_class_init(ObjectClass *oc, void *data)
1336 {
1337     DeviceClass *dc = DEVICE_CLASS(oc);
1338 
1339     dc->realize = xlnx_dp_realize;
1340     dc->vmsd = &vmstate_dp;
1341     dc->reset = xlnx_dp_reset;
1342 }
1343 
1344 static const TypeInfo xlnx_dp_info = {
1345     .name          = TYPE_XLNX_DP,
1346     .parent        = TYPE_SYS_BUS_DEVICE,
1347     .instance_size = sizeof(XlnxDPState),
1348     .instance_init = xlnx_dp_init,
1349     .class_init    = xlnx_dp_class_init,
1350 };
1351 
1352 static void xlnx_dp_register_types(void)
1353 {
1354     type_register_static(&xlnx_dp_info);
1355 }
1356 
1357 type_init(xlnx_dp_register_types)
1358