xref: /openbmc/qemu/hw/display/xlnx_dp.c (revision 4921d0a7)
1 /*
2  * Xilinx Display Port
3  *
4  *  Copyright (C) 2015 : GreenSocs Ltd
5  *      http://www.greensocs.com/ , email: info@greensocs.com
6  *
7  *  Developed by :
8  *  Frederic Konrad   <fred.konrad@greensocs.com>
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License as published by
12  * the Free Software Foundation, either version 2 of the License, or
13  * (at your option)any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18  * GNU General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License along
21  * with this program; if not, see <http://www.gnu.org/licenses/>.
22  *
23  */
24 
25 #include "qemu/osdep.h"
26 #include "qapi/error.h"
27 #include "qemu/error-report.h"
28 #include "qemu/log.h"
29 #include "qemu/module.h"
30 #include "hw/display/xlnx_dp.h"
31 #include "hw/irq.h"
32 #include "migration/vmstate.h"
33 
34 #ifndef DEBUG_DP
35 #define DEBUG_DP 0
36 #endif
37 
38 #define DPRINTF(fmt, ...) do {                                                 \
39     if (DEBUG_DP) {                                                            \
40         qemu_log("xlnx_dp: " fmt , ## __VA_ARGS__);                            \
41     }                                                                          \
42 } while (0)
43 
44 /*
45  * Register offset for DP.
46  */
47 #define DP_LINK_BW_SET                      (0x0000 >> 2)
48 #define DP_LANE_COUNT_SET                   (0x0004 >> 2)
49 #define DP_ENHANCED_FRAME_EN                (0x0008 >> 2)
50 #define DP_TRAINING_PATTERN_SET             (0x000C >> 2)
51 #define DP_LINK_QUAL_PATTERN_SET            (0x0010 >> 2)
52 #define DP_SCRAMBLING_DISABLE               (0x0014 >> 2)
53 #define DP_DOWNSPREAD_CTRL                  (0x0018 >> 2)
54 #define DP_SOFTWARE_RESET                   (0x001C >> 2)
55 #define DP_TRANSMITTER_ENABLE               (0x0080 >> 2)
56 #define DP_MAIN_STREAM_ENABLE               (0x0084 >> 2)
57 #define DP_FORCE_SCRAMBLER_RESET            (0x00C0 >> 2)
58 #define DP_VERSION_REGISTER                 (0x00F8 >> 2)
59 #define DP_CORE_ID                          (0x00FC >> 2)
60 
61 #define DP_AUX_COMMAND_REGISTER             (0x0100 >> 2)
62 #define AUX_ADDR_ONLY_MASK                  (0x1000)
63 #define AUX_COMMAND_MASK                    (0x0F00)
64 #define AUX_COMMAND_SHIFT                   (8)
65 #define AUX_COMMAND_NBYTES                  (0x000F)
66 
67 #define DP_AUX_WRITE_FIFO                   (0x0104 >> 2)
68 #define DP_AUX_ADDRESS                      (0x0108 >> 2)
69 #define DP_AUX_CLOCK_DIVIDER                (0x010C >> 2)
70 #define DP_TX_USER_FIFO_OVERFLOW            (0x0110 >> 2)
71 #define DP_INTERRUPT_SIGNAL_STATE           (0x0130 >> 2)
72 #define DP_AUX_REPLY_DATA                   (0x0134 >> 2)
73 #define DP_AUX_REPLY_CODE                   (0x0138 >> 2)
74 #define DP_AUX_REPLY_COUNT                  (0x013C >> 2)
75 #define DP_REPLY_DATA_COUNT                 (0x0148 >> 2)
76 #define DP_REPLY_STATUS                     (0x014C >> 2)
77 #define DP_HPD_DURATION                     (0x0150 >> 2)
78 #define DP_MAIN_STREAM_HTOTAL               (0x0180 >> 2)
79 #define DP_MAIN_STREAM_VTOTAL               (0x0184 >> 2)
80 #define DP_MAIN_STREAM_POLARITY             (0x0188 >> 2)
81 #define DP_MAIN_STREAM_HSWIDTH              (0x018C >> 2)
82 #define DP_MAIN_STREAM_VSWIDTH              (0x0190 >> 2)
83 #define DP_MAIN_STREAM_HRES                 (0x0194 >> 2)
84 #define DP_MAIN_STREAM_VRES                 (0x0198 >> 2)
85 #define DP_MAIN_STREAM_HSTART               (0x019C >> 2)
86 #define DP_MAIN_STREAM_VSTART               (0x01A0 >> 2)
87 #define DP_MAIN_STREAM_MISC0                (0x01A4 >> 2)
88 #define DP_MAIN_STREAM_MISC1                (0x01A8 >> 2)
89 #define DP_MAIN_STREAM_M_VID                (0x01AC >> 2)
90 #define DP_MSA_TRANSFER_UNIT_SIZE           (0x01B0 >> 2)
91 #define DP_MAIN_STREAM_N_VID                (0x01B4 >> 2)
92 #define DP_USER_DATA_COUNT_PER_LANE         (0x01BC >> 2)
93 #define DP_MIN_BYTES_PER_TU                 (0x01C4 >> 2)
94 #define DP_FRAC_BYTES_PER_TU                (0x01C8 >> 2)
95 #define DP_INIT_WAIT                        (0x01CC >> 2)
96 #define DP_PHY_RESET                        (0x0200 >> 2)
97 #define DP_PHY_VOLTAGE_DIFF_LANE_0          (0x0220 >> 2)
98 #define DP_PHY_VOLTAGE_DIFF_LANE_1          (0x0224 >> 2)
99 #define DP_TRANSMIT_PRBS7                   (0x0230 >> 2)
100 #define DP_PHY_CLOCK_SELECT                 (0x0234 >> 2)
101 #define DP_TX_PHY_POWER_DOWN                (0x0238 >> 2)
102 #define DP_PHY_PRECURSOR_LANE_0             (0x023C >> 2)
103 #define DP_PHY_PRECURSOR_LANE_1             (0x0240 >> 2)
104 #define DP_PHY_POSTCURSOR_LANE_0            (0x024C >> 2)
105 #define DP_PHY_POSTCURSOR_LANE_1            (0x0250 >> 2)
106 #define DP_PHY_STATUS                       (0x0280 >> 2)
107 
108 #define DP_TX_AUDIO_CONTROL                 (0x0300 >> 2)
109 #define DP_TX_AUD_CTRL                      (1)
110 
111 #define DP_TX_AUDIO_CHANNELS                (0x0304 >> 2)
112 #define DP_TX_AUDIO_INFO_DATA(n)            ((0x0308 + 4 * n) >> 2)
113 #define DP_TX_M_AUD                         (0x0328 >> 2)
114 #define DP_TX_N_AUD                         (0x032C >> 2)
115 #define DP_TX_AUDIO_EXT_DATA(n)             ((0x0330 + 4 * n) >> 2)
116 #define DP_INT_STATUS                       (0x03A0 >> 2)
117 #define DP_INT_VBLNK_START                  (1 << 13)
118 #define DP_INT_MASK                         (0x03A4 >> 2)
119 #define DP_INT_EN                           (0x03A8 >> 2)
120 #define DP_INT_DS                           (0x03AC >> 2)
121 
122 /*
123  * Registers offset for Audio Video Buffer configuration.
124  */
125 #define V_BLEND_OFFSET                      (0xA000)
126 #define V_BLEND_BG_CLR_0                    (0x0000 >> 2)
127 #define V_BLEND_BG_CLR_1                    (0x0004 >> 2)
128 #define V_BLEND_BG_CLR_2                    (0x0008 >> 2)
129 #define V_BLEND_SET_GLOBAL_ALPHA_REG        (0x000C >> 2)
130 #define V_BLEND_OUTPUT_VID_FORMAT           (0x0014 >> 2)
131 #define V_BLEND_LAYER0_CONTROL              (0x0018 >> 2)
132 #define V_BLEND_LAYER1_CONTROL              (0x001C >> 2)
133 
134 #define V_BLEND_RGB2YCBCR_COEFF(n)          ((0x0020 + 4 * n) >> 2)
135 #define V_BLEND_IN1CSC_COEFF(n)             ((0x0044 + 4 * n) >> 2)
136 
137 #define V_BLEND_LUMA_IN1CSC_OFFSET          (0x0068 >> 2)
138 #define V_BLEND_CR_IN1CSC_OFFSET            (0x006C >> 2)
139 #define V_BLEND_CB_IN1CSC_OFFSET            (0x0070 >> 2)
140 #define V_BLEND_LUMA_OUTCSC_OFFSET          (0x0074 >> 2)
141 #define V_BLEND_CR_OUTCSC_OFFSET            (0x0078 >> 2)
142 #define V_BLEND_CB_OUTCSC_OFFSET            (0x007C >> 2)
143 
144 #define V_BLEND_IN2CSC_COEFF(n)             ((0x0080 + 4 * n) >> 2)
145 
146 #define V_BLEND_LUMA_IN2CSC_OFFSET          (0x00A4 >> 2)
147 #define V_BLEND_CR_IN2CSC_OFFSET            (0x00A8 >> 2)
148 #define V_BLEND_CB_IN2CSC_OFFSET            (0x00AC >> 2)
149 #define V_BLEND_CHROMA_KEY_ENABLE           (0x01D0 >> 2)
150 #define V_BLEND_CHROMA_KEY_COMP1            (0x01D4 >> 2)
151 #define V_BLEND_CHROMA_KEY_COMP2            (0x01D8 >> 2)
152 #define V_BLEND_CHROMA_KEY_COMP3            (0x01DC >> 2)
153 
154 /*
155  * Registers offset for Audio Video Buffer configuration.
156  */
157 #define AV_BUF_MANAGER_OFFSET               (0xB000)
158 #define AV_BUF_FORMAT                       (0x0000 >> 2)
159 #define AV_BUF_NON_LIVE_LATENCY             (0x0008 >> 2)
160 #define AV_CHBUF0                           (0x0010 >> 2)
161 #define AV_CHBUF1                           (0x0014 >> 2)
162 #define AV_CHBUF2                           (0x0018 >> 2)
163 #define AV_CHBUF3                           (0x001C >> 2)
164 #define AV_CHBUF4                           (0x0020 >> 2)
165 #define AV_CHBUF5                           (0x0024 >> 2)
166 #define AV_BUF_STC_CONTROL                  (0x002C >> 2)
167 #define AV_BUF_STC_INIT_VALUE0              (0x0030 >> 2)
168 #define AV_BUF_STC_INIT_VALUE1              (0x0034 >> 2)
169 #define AV_BUF_STC_ADJ                      (0x0038 >> 2)
170 #define AV_BUF_STC_VIDEO_VSYNC_TS_REG0      (0x003C >> 2)
171 #define AV_BUF_STC_VIDEO_VSYNC_TS_REG1      (0x0040 >> 2)
172 #define AV_BUF_STC_EXT_VSYNC_TS_REG0        (0x0044 >> 2)
173 #define AV_BUF_STC_EXT_VSYNC_TS_REG1        (0x0048 >> 2)
174 #define AV_BUF_STC_CUSTOM_EVENT_TS_REG0     (0x004C >> 2)
175 #define AV_BUF_STC_CUSTOM_EVENT_TS_REG1     (0x0050 >> 2)
176 #define AV_BUF_STC_CUSTOM_EVENT2_TS_REG0    (0x0054 >> 2)
177 #define AV_BUF_STC_CUSTOM_EVENT2_TS_REG1    (0x0058 >> 2)
178 #define AV_BUF_STC_SNAPSHOT0                (0x0060 >> 2)
179 #define AV_BUF_STC_SNAPSHOT1                (0x0064 >> 2)
180 #define AV_BUF_OUTPUT_AUDIO_VIDEO_SELECT    (0x0070 >> 2)
181 #define AV_BUF_HCOUNT_VCOUNT_INT0           (0x0074 >> 2)
182 #define AV_BUF_HCOUNT_VCOUNT_INT1           (0x0078 >> 2)
183 #define AV_BUF_DITHER_CONFIG                (0x007C >> 2)
184 #define AV_BUF_DITHER_CONFIG_MAX            (0x008C >> 2)
185 #define AV_BUF_DITHER_CONFIG_MIN            (0x0090 >> 2)
186 #define AV_BUF_PATTERN_GEN_SELECT           (0x0100 >> 2)
187 #define AV_BUF_AUD_VID_CLK_SOURCE           (0x0120 >> 2)
188 #define AV_BUF_SRST_REG                     (0x0124 >> 2)
189 #define AV_BUF_AUDIO_RDY_INTERVAL           (0x0128 >> 2)
190 #define AV_BUF_AUDIO_CH_CONFIG              (0x012C >> 2)
191 
192 #define AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(n)((0x0200 + 4 * n) >> 2)
193 
194 #define AV_BUF_VIDEO_COMP_SCALE_FACTOR(n)   ((0x020C + 4 * n) >> 2)
195 
196 #define AV_BUF_LIVE_VIDEO_COMP_SF(n)        ((0x0218 + 4 * n) >> 2)
197 
198 #define AV_BUF_LIVE_VID_CONFIG              (0x0224 >> 2)
199 
200 #define AV_BUF_LIVE_GFX_COMP_SF(n)          ((0x0228 + 4 * n) >> 2)
201 
202 #define AV_BUF_LIVE_GFX_CONFIG              (0x0234 >> 2)
203 
204 #define AUDIO_MIXER_REGISTER_OFFSET         (0xC000)
205 #define AUDIO_MIXER_VOLUME_CONTROL          (0x0000 >> 2)
206 #define AUDIO_MIXER_META_DATA               (0x0004 >> 2)
207 #define AUD_CH_STATUS_REG(n)                ((0x0008 + 4 * n) >> 2)
208 #define AUD_CH_A_DATA_REG(n)                ((0x0020 + 4 * n) >> 2)
209 #define AUD_CH_B_DATA_REG(n)                ((0x0038 + 4 * n) >> 2)
210 
211 #define DP_AUDIO_DMA_CHANNEL(n)             (4 + n)
212 #define DP_GRAPHIC_DMA_CHANNEL              (3)
213 #define DP_VIDEO_DMA_CHANNEL                (0)
214 
215 enum DPGraphicFmt {
216     DP_GRAPHIC_RGBA8888 = 0 << 8,
217     DP_GRAPHIC_ABGR8888 = 1 << 8,
218     DP_GRAPHIC_RGB888 = 2 << 8,
219     DP_GRAPHIC_BGR888 = 3 << 8,
220     DP_GRAPHIC_RGBA5551 = 4 << 8,
221     DP_GRAPHIC_RGBA4444 = 5 << 8,
222     DP_GRAPHIC_RGB565 = 6 << 8,
223     DP_GRAPHIC_8BPP = 7 << 8,
224     DP_GRAPHIC_4BPP = 8 << 8,
225     DP_GRAPHIC_2BPP = 9 << 8,
226     DP_GRAPHIC_1BPP = 10 << 8,
227     DP_GRAPHIC_MASK = 0xF << 8
228 };
229 
230 enum DPVideoFmt {
231     DP_NL_VID_CB_Y0_CR_Y1 = 0,
232     DP_NL_VID_CR_Y0_CB_Y1 = 1,
233     DP_NL_VID_Y0_CR_Y1_CB = 2,
234     DP_NL_VID_Y0_CB_Y1_CR = 3,
235     DP_NL_VID_YV16 = 4,
236     DP_NL_VID_YV24 = 5,
237     DP_NL_VID_YV16CL = 6,
238     DP_NL_VID_MONO = 7,
239     DP_NL_VID_YV16CL2 = 8,
240     DP_NL_VID_YUV444 = 9,
241     DP_NL_VID_RGB888 = 10,
242     DP_NL_VID_RGBA8880 = 11,
243     DP_NL_VID_RGB888_10BPC = 12,
244     DP_NL_VID_YUV444_10BPC = 13,
245     DP_NL_VID_YV16CL2_10BPC = 14,
246     DP_NL_VID_YV16CL_10BPC = 15,
247     DP_NL_VID_YV16_10BPC = 16,
248     DP_NL_VID_YV24_10BPC = 17,
249     DP_NL_VID_Y_ONLY_10BPC = 18,
250     DP_NL_VID_YV16_420 = 19,
251     DP_NL_VID_YV16CL_420 = 20,
252     DP_NL_VID_YV16CL2_420 = 21,
253     DP_NL_VID_YV16_420_10BPC = 22,
254     DP_NL_VID_YV16CL_420_10BPC = 23,
255     DP_NL_VID_YV16CL2_420_10BPC = 24,
256     DP_NL_VID_FMT_MASK = 0x1F
257 };
258 
259 typedef enum DPGraphicFmt DPGraphicFmt;
260 typedef enum DPVideoFmt DPVideoFmt;
261 
262 static const VMStateDescription vmstate_dp = {
263     .name = TYPE_XLNX_DP,
264     .version_id = 2,
265     .fields = (const VMStateField[]){
266         VMSTATE_UINT32_ARRAY(core_registers, XlnxDPState,
267                              DP_CORE_REG_ARRAY_SIZE),
268         VMSTATE_UINT32_ARRAY(avbufm_registers, XlnxDPState,
269                              DP_AVBUF_REG_ARRAY_SIZE),
270         VMSTATE_UINT32_ARRAY(vblend_registers, XlnxDPState,
271                              DP_VBLEND_REG_ARRAY_SIZE),
272         VMSTATE_UINT32_ARRAY(audio_registers, XlnxDPState,
273                              DP_AUDIO_REG_ARRAY_SIZE),
274         VMSTATE_PTIMER(vblank, XlnxDPState),
275         VMSTATE_END_OF_LIST()
276     }
277 };
278 
279 #define DP_VBLANK_PTIMER_POLICY (PTIMER_POLICY_WRAP_AFTER_ONE_PERIOD | \
280                                  PTIMER_POLICY_CONTINUOUS_TRIGGER |    \
281                                  PTIMER_POLICY_NO_IMMEDIATE_TRIGGER)
282 
283 static void xlnx_dp_update_irq(XlnxDPState *s);
284 
285 static uint64_t xlnx_dp_audio_read(void *opaque, hwaddr offset, unsigned size)
286 {
287     XlnxDPState *s = XLNX_DP(opaque);
288 
289     offset = offset >> 2;
290     return s->audio_registers[offset];
291 }
292 
293 static void xlnx_dp_audio_write(void *opaque, hwaddr offset, uint64_t value,
294                                 unsigned size)
295 {
296     XlnxDPState *s = XLNX_DP(opaque);
297 
298     offset = offset >> 2;
299 
300     switch (offset) {
301     case AUDIO_MIXER_META_DATA:
302         s->audio_registers[offset] = value & 0x00000001;
303         break;
304     default:
305         s->audio_registers[offset] = value;
306         break;
307     }
308 }
309 
310 static const MemoryRegionOps audio_ops = {
311     .read = xlnx_dp_audio_read,
312     .write = xlnx_dp_audio_write,
313     .endianness = DEVICE_NATIVE_ENDIAN,
314 };
315 
316 static inline uint32_t xlnx_dp_audio_get_volume(XlnxDPState *s,
317                                                 uint8_t channel)
318 {
319     switch (channel) {
320     case 0:
321         return extract32(s->audio_registers[AUDIO_MIXER_VOLUME_CONTROL], 0, 16);
322     case 1:
323         return extract32(s->audio_registers[AUDIO_MIXER_VOLUME_CONTROL], 16,
324                                                                          16);
325     default:
326         return 0;
327     }
328 }
329 
330 static inline void xlnx_dp_audio_activate(XlnxDPState *s)
331 {
332     bool activated = ((s->core_registers[DP_TX_AUDIO_CONTROL]
333                    & DP_TX_AUD_CTRL) != 0);
334     AUD_set_active_out(s->amixer_output_stream, activated);
335     xlnx_dpdma_set_host_data_location(s->dpdma, DP_AUDIO_DMA_CHANNEL(0),
336                                       &s->audio_buffer_0);
337     xlnx_dpdma_set_host_data_location(s->dpdma, DP_AUDIO_DMA_CHANNEL(1),
338                                       &s->audio_buffer_1);
339 }
340 
341 static inline void xlnx_dp_audio_mix_buffer(XlnxDPState *s)
342 {
343     /*
344      * Audio packets are signed and have this shape:
345      * | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 |
346      * | R3 | L3 | R2 | L2 | R1 | L1 | R0 | L0 |
347      *
348      * Output audio is 16bits saturated.
349      */
350     int i;
351 
352     if ((s->audio_data_available[0]) && (xlnx_dp_audio_get_volume(s, 0))) {
353         for (i = 0; i < s->audio_data_available[0] / 2; i++) {
354             s->temp_buffer[i] = (int64_t)(s->audio_buffer_0[i])
355                               * xlnx_dp_audio_get_volume(s, 0) / 8192;
356         }
357         s->byte_left = s->audio_data_available[0];
358     } else {
359         memset(s->temp_buffer, 0, s->audio_data_available[1] / 2);
360     }
361 
362     if ((s->audio_data_available[1]) && (xlnx_dp_audio_get_volume(s, 1))) {
363         if ((s->audio_data_available[0] == 0)
364         || (s->audio_data_available[1] == s->audio_data_available[0])) {
365             for (i = 0; i < s->audio_data_available[1] / 2; i++) {
366                 s->temp_buffer[i] += (int64_t)(s->audio_buffer_1[i])
367                                    * xlnx_dp_audio_get_volume(s, 1) / 8192;
368             }
369             s->byte_left = s->audio_data_available[1];
370         }
371     }
372 
373     for (i = 0; i < s->byte_left / 2; i++) {
374         s->out_buffer[i] = MAX(-32767, MIN(s->temp_buffer[i], 32767));
375     }
376 
377     s->data_ptr = 0;
378 }
379 
380 static void xlnx_dp_audio_callback(void *opaque, int avail)
381 {
382     /*
383      * Get the individual left and right audio streams from the DPDMA,
384      * and fill the output buffer with the combined stereo audio data
385      * adjusted by the volume controls.
386      * QEMU's audio subsystem will call this callback repeatedly;
387      * we return the data from the output buffer until it is emptied,
388      * and then we will read data from the DPDMA again.
389      */
390     XlnxDPState *s = XLNX_DP(opaque);
391     size_t written = 0;
392 
393     if (s->byte_left == 0) {
394         s->audio_data_available[0] = xlnx_dpdma_start_operation(s->dpdma, 4,
395                                                                   true);
396         s->audio_data_available[1] = xlnx_dpdma_start_operation(s->dpdma, 5,
397                                                                   true);
398         xlnx_dp_audio_mix_buffer(s);
399     }
400 
401     /* Send the buffer through the audio. */
402     if (s->byte_left <= MAX_QEMU_BUFFER_SIZE) {
403         if (s->byte_left != 0) {
404             written = AUD_write(s->amixer_output_stream,
405                                 &s->out_buffer[s->data_ptr], s->byte_left);
406         } else {
407              int len_to_copy;
408             /*
409              * There is nothing to play.. We don't have any data! Fill the
410              * buffer with zero's and send it.
411              */
412             written = 0;
413             while (avail) {
414                 len_to_copy = MIN(AUD_CHBUF_MAX_DEPTH, avail);
415                 memset(s->out_buffer, 0, len_to_copy);
416                 avail -= AUD_write(s->amixer_output_stream, s->out_buffer,
417                                    len_to_copy);
418             }
419         }
420     } else {
421         written = AUD_write(s->amixer_output_stream,
422                             &s->out_buffer[s->data_ptr], MAX_QEMU_BUFFER_SIZE);
423     }
424     s->byte_left -= written;
425     s->data_ptr += written;
426 }
427 
428 /*
429  * AUX channel related function.
430  */
431 static void xlnx_dp_aux_clear_rx_fifo(XlnxDPState *s)
432 {
433     fifo8_reset(&s->rx_fifo);
434 }
435 
436 static void xlnx_dp_aux_push_rx_fifo(XlnxDPState *s, uint8_t *buf, size_t len)
437 {
438     DPRINTF("Push %u data in rx_fifo\n", (unsigned)len);
439     fifo8_push_all(&s->rx_fifo, buf, len);
440 }
441 
442 static uint8_t xlnx_dp_aux_pop_rx_fifo(XlnxDPState *s)
443 {
444     uint8_t ret;
445 
446     if (fifo8_is_empty(&s->rx_fifo)) {
447         qemu_log_mask(LOG_GUEST_ERROR,
448                       "%s: Reading empty RX_FIFO\n",
449                       __func__);
450         /*
451          * The datasheet is not clear about the reset value, it seems
452          * to be unspecified. We choose to return '0'.
453          */
454         ret = 0;
455     } else {
456         ret = fifo8_pop(&s->rx_fifo);
457         DPRINTF("pop 0x%" PRIX8 " from rx_fifo.\n", ret);
458     }
459     return ret;
460 }
461 
462 static void xlnx_dp_aux_clear_tx_fifo(XlnxDPState *s)
463 {
464     fifo8_reset(&s->tx_fifo);
465 }
466 
467 static void xlnx_dp_aux_push_tx_fifo(XlnxDPState *s, uint8_t *buf, size_t len)
468 {
469     DPRINTF("Push %u data in tx_fifo\n", (unsigned)len);
470     fifo8_push_all(&s->tx_fifo, buf, len);
471 }
472 
473 static uint8_t xlnx_dp_aux_pop_tx_fifo(XlnxDPState *s)
474 {
475     uint8_t ret;
476 
477     if (fifo8_is_empty(&s->tx_fifo)) {
478         error_report("%s: TX_FIFO underflow", __func__);
479         abort();
480     }
481     ret = fifo8_pop(&s->tx_fifo);
482     DPRINTF("pop 0x%2.2X from tx_fifo.\n", ret);
483     return ret;
484 }
485 
486 static uint32_t xlnx_dp_aux_get_address(XlnxDPState *s)
487 {
488     return s->core_registers[DP_AUX_ADDRESS];
489 }
490 
491 /*
492  * Get command from the register.
493  */
494 static void xlnx_dp_aux_set_command(XlnxDPState *s, uint32_t value)
495 {
496     bool address_only = (value & AUX_ADDR_ONLY_MASK) != 0;
497     AUXCommand cmd = (value & AUX_COMMAND_MASK) >> AUX_COMMAND_SHIFT;
498     uint8_t nbytes = (value & AUX_COMMAND_NBYTES) + 1;
499     uint8_t buf[16];
500     int i;
501 
502     /*
503      * When an address_only command is executed nothing happen to the fifo, so
504      * just make nbytes = 0.
505      */
506     if (address_only) {
507         nbytes = 0;
508     }
509 
510     switch (cmd) {
511     case READ_AUX:
512     case READ_I2C:
513     case READ_I2C_MOT:
514         s->core_registers[DP_AUX_REPLY_CODE] = aux_request(s->aux_bus, cmd,
515                                                xlnx_dp_aux_get_address(s),
516                                                nbytes, buf);
517         s->core_registers[DP_REPLY_DATA_COUNT] = nbytes;
518 
519         if (s->core_registers[DP_AUX_REPLY_CODE] == AUX_I2C_ACK) {
520             xlnx_dp_aux_push_rx_fifo(s, buf, nbytes);
521         }
522         break;
523     case WRITE_AUX:
524     case WRITE_I2C:
525     case WRITE_I2C_MOT:
526         for (i = 0; i < nbytes; i++) {
527             buf[i] = xlnx_dp_aux_pop_tx_fifo(s);
528         }
529         s->core_registers[DP_AUX_REPLY_CODE] = aux_request(s->aux_bus, cmd,
530                                                xlnx_dp_aux_get_address(s),
531                                                nbytes, buf);
532         xlnx_dp_aux_clear_tx_fifo(s);
533         break;
534     case WRITE_I2C_STATUS:
535         qemu_log_mask(LOG_UNIMP, "xlnx_dp: Write i2c status not implemented\n");
536         break;
537     default:
538         qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid command: %u", __func__, cmd);
539         return;
540     }
541 
542     s->core_registers[DP_INTERRUPT_SIGNAL_STATE] |= 0x04;
543 }
544 
545 static void xlnx_dp_set_dpdma(const Object *obj, const char *name, Object *val,
546                               Error **errp)
547 {
548     XlnxDPState *s = XLNX_DP(obj);
549     if (s->console) {
550         DisplaySurface *surface = qemu_console_surface(s->console);
551         XlnxDPDMAState *dma = XLNX_DPDMA(val);
552         xlnx_dpdma_set_host_data_location(dma, DP_GRAPHIC_DMA_CHANNEL,
553                                           surface_data(surface));
554     }
555 }
556 
557 static inline uint8_t xlnx_dp_global_alpha_value(XlnxDPState *s)
558 {
559     return (s->vblend_registers[V_BLEND_SET_GLOBAL_ALPHA_REG] & 0x1FE) >> 1;
560 }
561 
562 static inline bool xlnx_dp_global_alpha_enabled(XlnxDPState *s)
563 {
564     /*
565      * If the alpha is totally opaque (255) we consider the alpha is disabled to
566      * reduce CPU consumption.
567      */
568     return ((xlnx_dp_global_alpha_value(s) != 0xFF) &&
569            ((s->vblend_registers[V_BLEND_SET_GLOBAL_ALPHA_REG] & 0x01) != 0));
570 }
571 
572 static void xlnx_dp_recreate_surface(XlnxDPState *s)
573 {
574     /*
575      * Two possibilities, if blending is enabled the console displays
576      * bout_plane, if not g_plane is displayed.
577      */
578     uint16_t width = s->core_registers[DP_MAIN_STREAM_HRES];
579     uint16_t height = s->core_registers[DP_MAIN_STREAM_VRES];
580     DisplaySurface *current_console_surface = qemu_console_surface(s->console);
581 
582     if ((width != 0) && (height != 0)) {
583         /*
584          * As dpy_gfx_replace_surface calls qemu_free_displaysurface on the
585          * surface we need to be careful and don't free the surface associated
586          * to the console or double free will happen.
587          */
588         if (s->bout_plane.surface != current_console_surface) {
589             qemu_free_displaysurface(s->bout_plane.surface);
590         }
591         if (s->v_plane.surface != current_console_surface) {
592             qemu_free_displaysurface(s->v_plane.surface);
593         }
594         if (s->g_plane.surface != current_console_surface) {
595             qemu_free_displaysurface(s->g_plane.surface);
596         }
597 
598         s->g_plane.surface
599                 = qemu_create_displaysurface_from(width, height,
600                                                   s->g_plane.format, 0, NULL);
601         s->v_plane.surface
602                 = qemu_create_displaysurface_from(width, height,
603                                                   s->v_plane.format, 0, NULL);
604         if (xlnx_dp_global_alpha_enabled(s)) {
605             s->bout_plane.surface =
606                             qemu_create_displaysurface_from(width,
607                                                             height,
608                                                             s->g_plane.format,
609                                                             0, NULL);
610             dpy_gfx_replace_surface(s->console, s->bout_plane.surface);
611         } else {
612             s->bout_plane.surface = NULL;
613             dpy_gfx_replace_surface(s->console, s->g_plane.surface);
614         }
615 
616         xlnx_dpdma_set_host_data_location(s->dpdma, DP_GRAPHIC_DMA_CHANNEL,
617                                             surface_data(s->g_plane.surface));
618         xlnx_dpdma_set_host_data_location(s->dpdma, DP_VIDEO_DMA_CHANNEL,
619                                             surface_data(s->v_plane.surface));
620     }
621 }
622 
623 /*
624  * Change the graphic format of the surface.
625  */
626 static void xlnx_dp_change_graphic_fmt(XlnxDPState *s)
627 {
628     switch (s->avbufm_registers[AV_BUF_FORMAT] & DP_GRAPHIC_MASK) {
629     case DP_GRAPHIC_RGBA8888:
630         s->g_plane.format = PIXMAN_r8g8b8a8;
631         break;
632     case DP_GRAPHIC_ABGR8888:
633         s->g_plane.format = PIXMAN_a8b8g8r8;
634         break;
635     case DP_GRAPHIC_RGB565:
636         s->g_plane.format = PIXMAN_r5g6b5;
637         break;
638     case DP_GRAPHIC_RGB888:
639         s->g_plane.format = PIXMAN_r8g8b8;
640         break;
641     case DP_GRAPHIC_BGR888:
642         s->g_plane.format = PIXMAN_b8g8r8;
643         break;
644     default:
645         error_report("%s: unsupported graphic format %u", __func__,
646                      s->avbufm_registers[AV_BUF_FORMAT] & DP_GRAPHIC_MASK);
647         abort();
648     }
649 
650     switch (s->avbufm_registers[AV_BUF_FORMAT] & DP_NL_VID_FMT_MASK) {
651     case 0:
652         s->v_plane.format = PIXMAN_x8b8g8r8;
653         break;
654     case DP_NL_VID_Y0_CB_Y1_CR:
655         s->v_plane.format = PIXMAN_yuy2;
656         break;
657     case DP_NL_VID_RGBA8880:
658         s->v_plane.format = PIXMAN_x8b8g8r8;
659         break;
660     default:
661         error_report("%s: unsupported video format %u", __func__,
662                      s->avbufm_registers[AV_BUF_FORMAT] & DP_NL_VID_FMT_MASK);
663         abort();
664     }
665 
666     xlnx_dp_recreate_surface(s);
667 }
668 
669 static void xlnx_dp_update_irq(XlnxDPState *s)
670 {
671     uint32_t flags;
672 
673     flags = s->core_registers[DP_INT_STATUS] & ~s->core_registers[DP_INT_MASK];
674     DPRINTF("update IRQ value = %" PRIx32 "\n", flags);
675     qemu_set_irq(s->irq, flags != 0);
676 }
677 
678 static uint64_t xlnx_dp_read(void *opaque, hwaddr offset, unsigned size)
679 {
680     XlnxDPState *s = XLNX_DP(opaque);
681     uint64_t ret = 0;
682 
683     offset = offset >> 2;
684 
685     switch (offset) {
686     case DP_TX_USER_FIFO_OVERFLOW:
687         /* This register is cleared after a read */
688         ret = s->core_registers[DP_TX_USER_FIFO_OVERFLOW];
689         s->core_registers[DP_TX_USER_FIFO_OVERFLOW] = 0;
690         break;
691     case DP_AUX_REPLY_DATA:
692         ret = xlnx_dp_aux_pop_rx_fifo(s);
693         break;
694     case DP_INTERRUPT_SIGNAL_STATE:
695         /*
696          * XXX: Not sure it is the right thing to do actually.
697          * The register is not written by the device driver so it's stuck
698          * to 0x04.
699          */
700         ret = s->core_registers[DP_INTERRUPT_SIGNAL_STATE];
701         s->core_registers[DP_INTERRUPT_SIGNAL_STATE] &= ~0x04;
702         break;
703     case DP_AUX_WRITE_FIFO:
704     case DP_TX_AUDIO_INFO_DATA(0):
705     case DP_TX_AUDIO_INFO_DATA(1):
706     case DP_TX_AUDIO_INFO_DATA(2):
707     case DP_TX_AUDIO_INFO_DATA(3):
708     case DP_TX_AUDIO_INFO_DATA(4):
709     case DP_TX_AUDIO_INFO_DATA(5):
710     case DP_TX_AUDIO_INFO_DATA(6):
711     case DP_TX_AUDIO_INFO_DATA(7):
712     case DP_TX_AUDIO_EXT_DATA(0):
713     case DP_TX_AUDIO_EXT_DATA(1):
714     case DP_TX_AUDIO_EXT_DATA(2):
715     case DP_TX_AUDIO_EXT_DATA(3):
716     case DP_TX_AUDIO_EXT_DATA(4):
717     case DP_TX_AUDIO_EXT_DATA(5):
718     case DP_TX_AUDIO_EXT_DATA(6):
719     case DP_TX_AUDIO_EXT_DATA(7):
720     case DP_TX_AUDIO_EXT_DATA(8):
721         /* write only registers */
722         ret = 0;
723         break;
724     default:
725         assert(offset <= (0x3AC >> 2));
726         if (offset == (0x3A8 >> 2) || offset == (0x3AC >> 2)) {
727             ret = s->core_registers[DP_INT_MASK];
728         } else {
729             ret = s->core_registers[offset];
730         }
731         break;
732     }
733 
734     DPRINTF("core read @%" PRIx64 " = 0x%8.8" PRIX64 "\n", offset << 2, ret);
735     return ret;
736 }
737 
738 static void xlnx_dp_write(void *opaque, hwaddr offset, uint64_t value,
739                           unsigned size)
740 {
741     XlnxDPState *s = XLNX_DP(opaque);
742 
743     DPRINTF("core write @%" PRIx64 " = 0x%8.8" PRIX64 "\n", offset, value);
744 
745     offset = offset >> 2;
746 
747     switch (offset) {
748     /*
749      * Only special write case are handled.
750      */
751     case DP_LINK_BW_SET:
752         s->core_registers[offset] = value & 0x000000FF;
753         break;
754     case DP_LANE_COUNT_SET:
755     case DP_MAIN_STREAM_MISC0:
756         s->core_registers[offset] = value & 0x0000000F;
757         break;
758     case DP_TRAINING_PATTERN_SET:
759     case DP_LINK_QUAL_PATTERN_SET:
760     case DP_MAIN_STREAM_POLARITY:
761     case DP_PHY_VOLTAGE_DIFF_LANE_0:
762     case DP_PHY_VOLTAGE_DIFF_LANE_1:
763         s->core_registers[offset] = value & 0x00000003;
764         break;
765     case DP_ENHANCED_FRAME_EN:
766     case DP_SCRAMBLING_DISABLE:
767     case DP_DOWNSPREAD_CTRL:
768     case DP_MAIN_STREAM_ENABLE:
769     case DP_TRANSMIT_PRBS7:
770         s->core_registers[offset] = value & 0x00000001;
771         break;
772     case DP_PHY_CLOCK_SELECT:
773         s->core_registers[offset] = value & 0x00000007;
774         break;
775     case DP_SOFTWARE_RESET:
776         /*
777          * No need to update this bit as it's read '0'.
778          */
779         /*
780          * TODO: reset IP.
781          */
782         break;
783     case DP_TRANSMITTER_ENABLE:
784         s->core_registers[offset] = value & 0x01;
785         ptimer_transaction_begin(s->vblank);
786         if (value & 0x1) {
787             ptimer_run(s->vblank, 0);
788         } else {
789             ptimer_stop(s->vblank);
790         }
791         ptimer_transaction_commit(s->vblank);
792         break;
793     case DP_FORCE_SCRAMBLER_RESET:
794         /*
795          * No need to update this bit as it's read '0'.
796          */
797         /*
798          * TODO: force a scrambler reset??
799          */
800         break;
801     case DP_AUX_COMMAND_REGISTER:
802         s->core_registers[offset] = value & 0x00001F0F;
803         xlnx_dp_aux_set_command(s, s->core_registers[offset]);
804         break;
805     case DP_MAIN_STREAM_HTOTAL:
806     case DP_MAIN_STREAM_VTOTAL:
807     case DP_MAIN_STREAM_HSTART:
808     case DP_MAIN_STREAM_VSTART:
809         s->core_registers[offset] = value & 0x0000FFFF;
810         break;
811     case DP_MAIN_STREAM_HRES:
812     case DP_MAIN_STREAM_VRES:
813         s->core_registers[offset] = value & 0x0000FFFF;
814         xlnx_dp_recreate_surface(s);
815         break;
816     case DP_MAIN_STREAM_HSWIDTH:
817     case DP_MAIN_STREAM_VSWIDTH:
818         s->core_registers[offset] = value & 0x00007FFF;
819         break;
820     case DP_MAIN_STREAM_MISC1:
821         s->core_registers[offset] = value & 0x00000086;
822         break;
823     case DP_MAIN_STREAM_M_VID:
824     case DP_MAIN_STREAM_N_VID:
825         s->core_registers[offset] = value & 0x00FFFFFF;
826         break;
827     case DP_MSA_TRANSFER_UNIT_SIZE:
828     case DP_MIN_BYTES_PER_TU:
829     case DP_INIT_WAIT:
830         s->core_registers[offset] = value & 0x00000007;
831         break;
832     case DP_USER_DATA_COUNT_PER_LANE:
833         s->core_registers[offset] = value & 0x0003FFFF;
834         break;
835     case DP_FRAC_BYTES_PER_TU:
836         s->core_registers[offset] = value & 0x000003FF;
837         break;
838     case DP_PHY_RESET:
839         s->core_registers[offset] = value & 0x00010003;
840         /*
841          * TODO: Reset something?
842          */
843         break;
844     case DP_TX_PHY_POWER_DOWN:
845         s->core_registers[offset] = value & 0x0000000F;
846         /*
847          * TODO: Power down things?
848          */
849         break;
850     case DP_AUX_WRITE_FIFO: {
851         uint8_t c = value;
852         xlnx_dp_aux_push_tx_fifo(s, &c, 1);
853         break;
854     }
855     case DP_AUX_CLOCK_DIVIDER:
856         break;
857     case DP_AUX_REPLY_COUNT:
858         /*
859          * Writing to this register clear the counter.
860          */
861         s->core_registers[offset] = 0x00000000;
862         break;
863     case DP_AUX_ADDRESS:
864         s->core_registers[offset] = value & 0x000FFFFF;
865         break;
866     case DP_VERSION_REGISTER:
867     case DP_CORE_ID:
868     case DP_TX_USER_FIFO_OVERFLOW:
869     case DP_AUX_REPLY_DATA:
870     case DP_AUX_REPLY_CODE:
871     case DP_REPLY_DATA_COUNT:
872     case DP_REPLY_STATUS:
873     case DP_HPD_DURATION:
874         /*
875          * Write to read only location..
876          */
877         break;
878     case DP_TX_AUDIO_CONTROL:
879         s->core_registers[offset] = value & 0x00000001;
880         xlnx_dp_audio_activate(s);
881         break;
882     case DP_TX_AUDIO_CHANNELS:
883         s->core_registers[offset] = value & 0x00000007;
884         xlnx_dp_audio_activate(s);
885         break;
886     case DP_INT_STATUS:
887         s->core_registers[DP_INT_STATUS] &= ~value;
888         xlnx_dp_update_irq(s);
889         break;
890     case DP_INT_EN:
891         s->core_registers[DP_INT_MASK] &= ~value;
892         xlnx_dp_update_irq(s);
893         break;
894     case DP_INT_DS:
895         s->core_registers[DP_INT_MASK] |= value;
896         xlnx_dp_update_irq(s);
897         break;
898     default:
899         assert(offset <= (0x504C >> 2));
900         s->core_registers[offset] = value;
901         break;
902     }
903 }
904 
905 static const MemoryRegionOps dp_ops = {
906     .read = xlnx_dp_read,
907     .write = xlnx_dp_write,
908     .endianness = DEVICE_NATIVE_ENDIAN,
909     .valid = {
910         .min_access_size = 4,
911         .max_access_size = 4,
912     },
913     .impl = {
914         .min_access_size = 4,
915         .max_access_size = 4,
916     },
917 };
918 
919 /*
920  * This is to handle Read/Write to the Video Blender.
921  */
922 static void xlnx_dp_vblend_write(void *opaque, hwaddr offset,
923                                  uint64_t value, unsigned size)
924 {
925     XlnxDPState *s = XLNX_DP(opaque);
926     bool alpha_was_enabled;
927 
928     DPRINTF("vblend: write @0x%" HWADDR_PRIX " = 0x%" PRIX32 "\n", offset,
929                                                                (uint32_t)value);
930     offset = offset >> 2;
931 
932     switch (offset) {
933     case V_BLEND_BG_CLR_0:
934     case V_BLEND_BG_CLR_1:
935     case V_BLEND_BG_CLR_2:
936         s->vblend_registers[offset] = value & 0x00000FFF;
937         break;
938     case V_BLEND_SET_GLOBAL_ALPHA_REG:
939         /*
940          * A write to this register can enable or disable blending. Thus we need
941          * to recreate the surfaces.
942          */
943         alpha_was_enabled = xlnx_dp_global_alpha_enabled(s);
944         s->vblend_registers[offset] = value & 0x000001FF;
945         if (xlnx_dp_global_alpha_enabled(s) != alpha_was_enabled) {
946             xlnx_dp_recreate_surface(s);
947         }
948         break;
949     case V_BLEND_OUTPUT_VID_FORMAT:
950         s->vblend_registers[offset] = value & 0x00000017;
951         break;
952     case V_BLEND_LAYER0_CONTROL:
953     case V_BLEND_LAYER1_CONTROL:
954         s->vblend_registers[offset] = value & 0x00000103;
955         break;
956     case V_BLEND_RGB2YCBCR_COEFF(0):
957     case V_BLEND_RGB2YCBCR_COEFF(1):
958     case V_BLEND_RGB2YCBCR_COEFF(2):
959     case V_BLEND_RGB2YCBCR_COEFF(3):
960     case V_BLEND_RGB2YCBCR_COEFF(4):
961     case V_BLEND_RGB2YCBCR_COEFF(5):
962     case V_BLEND_RGB2YCBCR_COEFF(6):
963     case V_BLEND_RGB2YCBCR_COEFF(7):
964     case V_BLEND_RGB2YCBCR_COEFF(8):
965     case V_BLEND_IN1CSC_COEFF(0):
966     case V_BLEND_IN1CSC_COEFF(1):
967     case V_BLEND_IN1CSC_COEFF(2):
968     case V_BLEND_IN1CSC_COEFF(3):
969     case V_BLEND_IN1CSC_COEFF(4):
970     case V_BLEND_IN1CSC_COEFF(5):
971     case V_BLEND_IN1CSC_COEFF(6):
972     case V_BLEND_IN1CSC_COEFF(7):
973     case V_BLEND_IN1CSC_COEFF(8):
974     case V_BLEND_IN2CSC_COEFF(0):
975     case V_BLEND_IN2CSC_COEFF(1):
976     case V_BLEND_IN2CSC_COEFF(2):
977     case V_BLEND_IN2CSC_COEFF(3):
978     case V_BLEND_IN2CSC_COEFF(4):
979     case V_BLEND_IN2CSC_COEFF(5):
980     case V_BLEND_IN2CSC_COEFF(6):
981     case V_BLEND_IN2CSC_COEFF(7):
982     case V_BLEND_IN2CSC_COEFF(8):
983         s->vblend_registers[offset] = value & 0x0000FFFF;
984         break;
985     case V_BLEND_LUMA_IN1CSC_OFFSET:
986     case V_BLEND_CR_IN1CSC_OFFSET:
987     case V_BLEND_CB_IN1CSC_OFFSET:
988     case V_BLEND_LUMA_IN2CSC_OFFSET:
989     case V_BLEND_CR_IN2CSC_OFFSET:
990     case V_BLEND_CB_IN2CSC_OFFSET:
991     case V_BLEND_LUMA_OUTCSC_OFFSET:
992     case V_BLEND_CR_OUTCSC_OFFSET:
993     case V_BLEND_CB_OUTCSC_OFFSET:
994         s->vblend_registers[offset] = value & 0x3FFF7FFF;
995         break;
996     case V_BLEND_CHROMA_KEY_ENABLE:
997         s->vblend_registers[offset] = value & 0x00000003;
998         break;
999     case V_BLEND_CHROMA_KEY_COMP1:
1000     case V_BLEND_CHROMA_KEY_COMP2:
1001     case V_BLEND_CHROMA_KEY_COMP3:
1002         s->vblend_registers[offset] = value & 0x0FFF0FFF;
1003         break;
1004     default:
1005         s->vblend_registers[offset] = value;
1006         break;
1007     }
1008 }
1009 
1010 static uint64_t xlnx_dp_vblend_read(void *opaque, hwaddr offset,
1011                                     unsigned size)
1012 {
1013     XlnxDPState *s = XLNX_DP(opaque);
1014 
1015     DPRINTF("vblend: read @0x%" HWADDR_PRIX " = 0x%" PRIX32 "\n", offset,
1016             s->vblend_registers[offset >> 2]);
1017     return s->vblend_registers[offset >> 2];
1018 }
1019 
1020 static const MemoryRegionOps vblend_ops = {
1021     .read = xlnx_dp_vblend_read,
1022     .write = xlnx_dp_vblend_write,
1023     .endianness = DEVICE_NATIVE_ENDIAN,
1024     .valid = {
1025         .min_access_size = 4,
1026         .max_access_size = 4,
1027     },
1028     .impl = {
1029         .min_access_size = 4,
1030         .max_access_size = 4,
1031     },
1032 };
1033 
1034 /*
1035  * This is to handle Read/Write to the Audio Video buffer manager.
1036  */
1037 static void xlnx_dp_avbufm_write(void *opaque, hwaddr offset, uint64_t value,
1038                                  unsigned size)
1039 {
1040     XlnxDPState *s = XLNX_DP(opaque);
1041 
1042     DPRINTF("avbufm: write @0x%" HWADDR_PRIX " = 0x%" PRIX32 "\n", offset,
1043                                                                (uint32_t)value);
1044     offset = offset >> 2;
1045 
1046     switch (offset) {
1047     case AV_BUF_FORMAT:
1048         s->avbufm_registers[offset] = value & 0x00000FFF;
1049         xlnx_dp_change_graphic_fmt(s);
1050         break;
1051     case AV_CHBUF0:
1052     case AV_CHBUF1:
1053     case AV_CHBUF2:
1054     case AV_CHBUF3:
1055     case AV_CHBUF4:
1056     case AV_CHBUF5:
1057         s->avbufm_registers[offset] = value & 0x0000007F;
1058         break;
1059     case AV_BUF_OUTPUT_AUDIO_VIDEO_SELECT:
1060         s->avbufm_registers[offset] = value & 0x0000007F;
1061         break;
1062     case AV_BUF_DITHER_CONFIG:
1063         s->avbufm_registers[offset] = value & 0x000007FF;
1064         break;
1065     case AV_BUF_DITHER_CONFIG_MAX:
1066     case AV_BUF_DITHER_CONFIG_MIN:
1067         s->avbufm_registers[offset] = value & 0x00000FFF;
1068         break;
1069     case AV_BUF_PATTERN_GEN_SELECT:
1070         s->avbufm_registers[offset] = value & 0xFFFFFF03;
1071         break;
1072     case AV_BUF_AUD_VID_CLK_SOURCE:
1073         s->avbufm_registers[offset] = value & 0x00000007;
1074         break;
1075     case AV_BUF_SRST_REG:
1076         s->avbufm_registers[offset] = value & 0x00000002;
1077         break;
1078     case AV_BUF_AUDIO_CH_CONFIG:
1079         s->avbufm_registers[offset] = value & 0x00000003;
1080         break;
1081     case AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(0):
1082     case AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(1):
1083     case AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(2):
1084     case AV_BUF_VIDEO_COMP_SCALE_FACTOR(0):
1085     case AV_BUF_VIDEO_COMP_SCALE_FACTOR(1):
1086     case AV_BUF_VIDEO_COMP_SCALE_FACTOR(2):
1087         s->avbufm_registers[offset] = value & 0x0000FFFF;
1088         break;
1089     case AV_BUF_LIVE_VIDEO_COMP_SF(0):
1090     case AV_BUF_LIVE_VIDEO_COMP_SF(1):
1091     case AV_BUF_LIVE_VIDEO_COMP_SF(2):
1092     case AV_BUF_LIVE_VID_CONFIG:
1093     case AV_BUF_LIVE_GFX_COMP_SF(0):
1094     case AV_BUF_LIVE_GFX_COMP_SF(1):
1095     case AV_BUF_LIVE_GFX_COMP_SF(2):
1096     case AV_BUF_LIVE_GFX_CONFIG:
1097     case AV_BUF_NON_LIVE_LATENCY:
1098     case AV_BUF_STC_CONTROL:
1099     case AV_BUF_STC_INIT_VALUE0:
1100     case AV_BUF_STC_INIT_VALUE1:
1101     case AV_BUF_STC_ADJ:
1102     case AV_BUF_STC_VIDEO_VSYNC_TS_REG0:
1103     case AV_BUF_STC_VIDEO_VSYNC_TS_REG1:
1104     case AV_BUF_STC_EXT_VSYNC_TS_REG0:
1105     case AV_BUF_STC_EXT_VSYNC_TS_REG1:
1106     case AV_BUF_STC_CUSTOM_EVENT_TS_REG0:
1107     case AV_BUF_STC_CUSTOM_EVENT_TS_REG1:
1108     case AV_BUF_STC_CUSTOM_EVENT2_TS_REG0:
1109     case AV_BUF_STC_CUSTOM_EVENT2_TS_REG1:
1110     case AV_BUF_STC_SNAPSHOT0:
1111     case AV_BUF_STC_SNAPSHOT1:
1112     case AV_BUF_HCOUNT_VCOUNT_INT0:
1113     case AV_BUF_HCOUNT_VCOUNT_INT1:
1114         qemu_log_mask(LOG_UNIMP, "avbufm: unimplemented register 0x%04"
1115                                  PRIx64 "\n",
1116                       offset << 2);
1117         break;
1118     default:
1119         s->avbufm_registers[offset] = value;
1120         break;
1121     }
1122 }
1123 
1124 static uint64_t xlnx_dp_avbufm_read(void *opaque, hwaddr offset,
1125                                     unsigned size)
1126 {
1127     XlnxDPState *s = XLNX_DP(opaque);
1128 
1129     offset = offset >> 2;
1130     return s->avbufm_registers[offset];
1131 }
1132 
1133 static const MemoryRegionOps avbufm_ops = {
1134     .read = xlnx_dp_avbufm_read,
1135     .write = xlnx_dp_avbufm_write,
1136     .endianness = DEVICE_NATIVE_ENDIAN,
1137     .valid = {
1138         .min_access_size = 4,
1139         .max_access_size = 4,
1140     },
1141     .impl = {
1142         .min_access_size = 4,
1143         .max_access_size = 4,
1144     },
1145 };
1146 
1147 /*
1148  * This is a global alpha blending using pixman.
1149  * Both graphic and video planes are multiplied with the global alpha
1150  * coefficient and added.
1151  */
1152 static inline void xlnx_dp_blend_surface(XlnxDPState *s)
1153 {
1154     pixman_fixed_t alpha1[] = { pixman_double_to_fixed(1),
1155                                 pixman_double_to_fixed(1),
1156                                 pixman_double_to_fixed(1.0) };
1157     pixman_fixed_t alpha2[] = { pixman_double_to_fixed(1),
1158                                 pixman_double_to_fixed(1),
1159                                 pixman_double_to_fixed(1.0) };
1160 
1161     if ((surface_width(s->g_plane.surface)
1162          != surface_width(s->v_plane.surface)) ||
1163         (surface_height(s->g_plane.surface)
1164          != surface_height(s->v_plane.surface))) {
1165         return;
1166     }
1167 
1168     alpha1[2] = pixman_double_to_fixed((double)(xlnx_dp_global_alpha_value(s))
1169                                        / 256.0);
1170     alpha2[2] = pixman_double_to_fixed((255.0
1171                                     - (double)xlnx_dp_global_alpha_value(s))
1172                                        / 256.0);
1173 
1174     pixman_image_set_filter(s->g_plane.surface->image,
1175                             PIXMAN_FILTER_CONVOLUTION, alpha1, 3);
1176     pixman_image_composite(PIXMAN_OP_SRC, s->g_plane.surface->image, 0,
1177                            s->bout_plane.surface->image, 0, 0, 0, 0, 0, 0,
1178                            surface_width(s->g_plane.surface),
1179                            surface_height(s->g_plane.surface));
1180     pixman_image_set_filter(s->v_plane.surface->image,
1181                             PIXMAN_FILTER_CONVOLUTION, alpha2, 3);
1182     pixman_image_composite(PIXMAN_OP_ADD, s->v_plane.surface->image, 0,
1183                            s->bout_plane.surface->image, 0, 0, 0, 0, 0, 0,
1184                            surface_width(s->g_plane.surface),
1185                            surface_height(s->g_plane.surface));
1186 }
1187 
1188 static void xlnx_dp_update_display(void *opaque)
1189 {
1190     XlnxDPState *s = XLNX_DP(opaque);
1191 
1192     if ((s->core_registers[DP_TRANSMITTER_ENABLE] & 0x01) == 0) {
1193         return;
1194     }
1195 
1196     xlnx_dpdma_trigger_vsync_irq(s->dpdma);
1197 
1198     /*
1199      * Trigger the DMA channel.
1200      */
1201     if (!xlnx_dpdma_start_operation(s->dpdma, 3, false)) {
1202         /*
1203          * An error occurred don't do anything with the data..
1204          * Trigger an underflow interrupt.
1205          */
1206         s->core_registers[DP_INT_STATUS] |= (1 << 21);
1207         xlnx_dp_update_irq(s);
1208         return;
1209     }
1210 
1211     if (xlnx_dp_global_alpha_enabled(s)) {
1212         if (!xlnx_dpdma_start_operation(s->dpdma, 0, false)) {
1213             s->core_registers[DP_INT_STATUS] |= (1 << 21);
1214             xlnx_dp_update_irq(s);
1215             return;
1216         }
1217         xlnx_dp_blend_surface(s);
1218     }
1219 
1220     /*
1221      * XXX: We might want to update only what changed.
1222      */
1223     dpy_gfx_update_full(s->console);
1224 }
1225 
1226 static const GraphicHwOps xlnx_dp_gfx_ops = {
1227     .gfx_update  = xlnx_dp_update_display,
1228 };
1229 
1230 static void xlnx_dp_init(Object *obj)
1231 {
1232     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
1233     XlnxDPState *s = XLNX_DP(obj);
1234 
1235     memory_region_init(&s->container, obj, TYPE_XLNX_DP, DP_CONTAINER_SIZE);
1236 
1237     memory_region_init_io(&s->core_iomem, obj, &dp_ops, s, TYPE_XLNX_DP
1238                           ".core", sizeof(s->core_registers));
1239     memory_region_add_subregion(&s->container, DP_CORE_REG_OFFSET,
1240                                 &s->core_iomem);
1241 
1242     memory_region_init_io(&s->vblend_iomem, obj, &vblend_ops, s, TYPE_XLNX_DP
1243                           ".v_blend", sizeof(s->vblend_registers));
1244     memory_region_add_subregion(&s->container, DP_VBLEND_REG_OFFSET,
1245                                 &s->vblend_iomem);
1246 
1247     memory_region_init_io(&s->avbufm_iomem, obj, &avbufm_ops, s, TYPE_XLNX_DP
1248                           ".av_buffer_manager", sizeof(s->avbufm_registers));
1249     memory_region_add_subregion(&s->container, DP_AVBUF_REG_OFFSET,
1250                                 &s->avbufm_iomem);
1251 
1252     memory_region_init_io(&s->audio_iomem, obj, &audio_ops, s, TYPE_XLNX_DP
1253                           ".audio", sizeof(s->audio_registers));
1254     memory_region_add_subregion(&s->container, 0xC000, &s->audio_iomem);
1255 
1256     sysbus_init_mmio(sbd, &s->container);
1257     sysbus_init_irq(sbd, &s->irq);
1258 
1259     object_property_add_link(obj, "dpdma", TYPE_XLNX_DPDMA,
1260                              (Object **) &s->dpdma,
1261                              xlnx_dp_set_dpdma,
1262                              OBJ_PROP_LINK_STRONG);
1263 
1264     /*
1265      * Initialize AUX Bus.
1266      */
1267     s->aux_bus = aux_bus_init(DEVICE(obj), "aux");
1268 
1269     /*
1270      * Initialize DPCD and EDID..
1271      */
1272     s->dpcd = DPCD(qdev_new("dpcd"));
1273     object_property_add_child(OBJECT(s), "dpcd", OBJECT(s->dpcd));
1274 
1275     s->edid = I2CDDC(qdev_new("i2c-ddc"));
1276     i2c_slave_set_address(I2C_SLAVE(s->edid), 0x50);
1277     object_property_add_child(OBJECT(s), "edid", OBJECT(s->edid));
1278 
1279     fifo8_create(&s->rx_fifo, 16);
1280     fifo8_create(&s->tx_fifo, 16);
1281 }
1282 
1283 static void xlnx_dp_finalize(Object *obj)
1284 {
1285     XlnxDPState *s = XLNX_DP(obj);
1286 
1287     fifo8_destroy(&s->tx_fifo);
1288     fifo8_destroy(&s->rx_fifo);
1289 }
1290 
1291 static void vblank_hit(void *opaque)
1292 {
1293     XlnxDPState *s = XLNX_DP(opaque);
1294 
1295     s->core_registers[DP_INT_STATUS] |= DP_INT_VBLNK_START;
1296     xlnx_dp_update_irq(s);
1297 }
1298 
1299 static void xlnx_dp_realize(DeviceState *dev, Error **errp)
1300 {
1301     XlnxDPState *s = XLNX_DP(dev);
1302     DisplaySurface *surface;
1303     struct audsettings as;
1304 
1305     if (!AUD_register_card("xlnx_dp.audio", &s->aud_card, errp)) {
1306         return;
1307     }
1308 
1309     aux_bus_realize(s->aux_bus);
1310 
1311     qdev_realize(DEVICE(s->dpcd), BUS(s->aux_bus), &error_fatal);
1312     aux_map_slave(AUX_SLAVE(s->dpcd), 0x0000);
1313 
1314     qdev_realize_and_unref(DEVICE(s->edid), BUS(aux_get_i2c_bus(s->aux_bus)),
1315                            &error_fatal);
1316 
1317     s->console = graphic_console_init(dev, 0, &xlnx_dp_gfx_ops, s);
1318     surface = qemu_console_surface(s->console);
1319     xlnx_dpdma_set_host_data_location(s->dpdma, DP_GRAPHIC_DMA_CHANNEL,
1320                                       surface_data(surface));
1321 
1322     as.freq = 44100;
1323     as.nchannels = 2;
1324     as.fmt = AUDIO_FORMAT_S16;
1325     as.endianness = 0;
1326 
1327     s->amixer_output_stream = AUD_open_out(&s->aud_card,
1328                                            s->amixer_output_stream,
1329                                            "xlnx_dp.audio.out",
1330                                            s,
1331                                            xlnx_dp_audio_callback,
1332                                            &as);
1333     AUD_set_volume_out(s->amixer_output_stream, 0, 255, 255);
1334     xlnx_dp_audio_activate(s);
1335     s->vblank = ptimer_init(vblank_hit, s, DP_VBLANK_PTIMER_POLICY);
1336     ptimer_transaction_begin(s->vblank);
1337     ptimer_set_freq(s->vblank, 30);
1338     ptimer_transaction_commit(s->vblank);
1339 }
1340 
1341 static void xlnx_dp_reset(DeviceState *dev)
1342 {
1343     XlnxDPState *s = XLNX_DP(dev);
1344 
1345     memset(s->core_registers, 0, sizeof(s->core_registers));
1346     s->core_registers[DP_VERSION_REGISTER] = 0x04010000;
1347     s->core_registers[DP_CORE_ID] = 0x01020000;
1348     s->core_registers[DP_REPLY_STATUS] = 0x00000010;
1349     s->core_registers[DP_MSA_TRANSFER_UNIT_SIZE] = 0x00000040;
1350     s->core_registers[DP_INIT_WAIT] = 0x00000020;
1351     s->core_registers[DP_PHY_RESET] = 0x00010003;
1352     s->core_registers[DP_INT_MASK] = 0xFFFFF03F;
1353     s->core_registers[DP_PHY_STATUS] = 0x00000043;
1354     s->core_registers[DP_INTERRUPT_SIGNAL_STATE] = 0x00000001;
1355 
1356     s->vblend_registers[V_BLEND_RGB2YCBCR_COEFF(0)] = 0x00001000;
1357     s->vblend_registers[V_BLEND_RGB2YCBCR_COEFF(4)] = 0x00001000;
1358     s->vblend_registers[V_BLEND_RGB2YCBCR_COEFF(8)] = 0x00001000;
1359     s->vblend_registers[V_BLEND_IN1CSC_COEFF(0)] = 0x00001000;
1360     s->vblend_registers[V_BLEND_IN1CSC_COEFF(4)] = 0x00001000;
1361     s->vblend_registers[V_BLEND_IN1CSC_COEFF(8)] = 0x00001000;
1362     s->vblend_registers[V_BLEND_IN2CSC_COEFF(0)] = 0x00001000;
1363     s->vblend_registers[V_BLEND_IN2CSC_COEFF(4)] = 0x00001000;
1364     s->vblend_registers[V_BLEND_IN2CSC_COEFF(8)] = 0x00001000;
1365 
1366     s->avbufm_registers[AV_BUF_NON_LIVE_LATENCY] = 0x00000180;
1367     s->avbufm_registers[AV_BUF_OUTPUT_AUDIO_VIDEO_SELECT] = 0x00000008;
1368     s->avbufm_registers[AV_BUF_DITHER_CONFIG_MAX] = 0x00000FFF;
1369     s->avbufm_registers[AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(0)] = 0x00010101;
1370     s->avbufm_registers[AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(1)] = 0x00010101;
1371     s->avbufm_registers[AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(2)] = 0x00010101;
1372     s->avbufm_registers[AV_BUF_VIDEO_COMP_SCALE_FACTOR(0)] = 0x00010101;
1373     s->avbufm_registers[AV_BUF_VIDEO_COMP_SCALE_FACTOR(1)] = 0x00010101;
1374     s->avbufm_registers[AV_BUF_VIDEO_COMP_SCALE_FACTOR(2)] = 0x00010101;
1375     s->avbufm_registers[AV_BUF_LIVE_VIDEO_COMP_SF(0)] = 0x00010101;
1376     s->avbufm_registers[AV_BUF_LIVE_VIDEO_COMP_SF(1)] = 0x00010101;
1377     s->avbufm_registers[AV_BUF_LIVE_VIDEO_COMP_SF(2)] = 0x00010101;
1378     s->avbufm_registers[AV_BUF_LIVE_GFX_COMP_SF(0)] = 0x00010101;
1379     s->avbufm_registers[AV_BUF_LIVE_GFX_COMP_SF(1)] = 0x00010101;
1380     s->avbufm_registers[AV_BUF_LIVE_GFX_COMP_SF(2)] = 0x00010101;
1381 
1382     memset(s->audio_registers, 0, sizeof(s->audio_registers));
1383     s->byte_left = 0;
1384 
1385     xlnx_dp_aux_clear_rx_fifo(s);
1386     xlnx_dp_change_graphic_fmt(s);
1387     xlnx_dp_update_irq(s);
1388 }
1389 
1390 static Property xlnx_dp_device_properties[] = {
1391     DEFINE_AUDIO_PROPERTIES(XlnxDPState, aud_card),
1392     DEFINE_PROP_END_OF_LIST(),
1393 };
1394 
1395 static void xlnx_dp_class_init(ObjectClass *oc, void *data)
1396 {
1397     DeviceClass *dc = DEVICE_CLASS(oc);
1398 
1399     dc->realize = xlnx_dp_realize;
1400     dc->vmsd = &vmstate_dp;
1401     dc->reset = xlnx_dp_reset;
1402     device_class_set_props(dc, xlnx_dp_device_properties);
1403 }
1404 
1405 static const TypeInfo xlnx_dp_info = {
1406     .name          = TYPE_XLNX_DP,
1407     .parent        = TYPE_SYS_BUS_DEVICE,
1408     .instance_size = sizeof(XlnxDPState),
1409     .instance_init = xlnx_dp_init,
1410     .instance_finalize = xlnx_dp_finalize,
1411     .class_init    = xlnx_dp_class_init,
1412 };
1413 
1414 static void xlnx_dp_register_types(void)
1415 {
1416     type_register_static(&xlnx_dp_info);
1417 }
1418 
1419 type_init(xlnx_dp_register_types)
1420