1 /* 2 * xlnx_dp.c 3 * 4 * Copyright (C) 2015 : GreenSocs Ltd 5 * http://www.greensocs.com/ , email: info@greensocs.com 6 * 7 * Developed by : 8 * Frederic Konrad <fred.konrad@greensocs.com> 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License as published by 12 * the Free Software Foundation, either version 2 of the License, or 13 * (at your option)any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License along 21 * with this program; if not, see <http://www.gnu.org/licenses/>. 22 * 23 */ 24 25 #include "qemu/osdep.h" 26 #include "qemu/log.h" 27 #include "hw/display/xlnx_dp.h" 28 29 #ifndef DEBUG_DP 30 #define DEBUG_DP 0 31 #endif 32 33 #define DPRINTF(fmt, ...) do { \ 34 if (DEBUG_DP) { \ 35 qemu_log("xlnx_dp: " fmt , ## __VA_ARGS__); \ 36 } \ 37 } while (0); 38 39 /* 40 * Register offset for DP. 41 */ 42 #define DP_LINK_BW_SET (0x0000 >> 2) 43 #define DP_LANE_COUNT_SET (0x0004 >> 2) 44 #define DP_ENHANCED_FRAME_EN (0x0008 >> 2) 45 #define DP_TRAINING_PATTERN_SET (0x000C >> 2) 46 #define DP_LINK_QUAL_PATTERN_SET (0x0010 >> 2) 47 #define DP_SCRAMBLING_DISABLE (0x0014 >> 2) 48 #define DP_DOWNSPREAD_CTRL (0x0018 >> 2) 49 #define DP_SOFTWARE_RESET (0x001C >> 2) 50 #define DP_TRANSMITTER_ENABLE (0x0080 >> 2) 51 #define DP_MAIN_STREAM_ENABLE (0x0084 >> 2) 52 #define DP_FORCE_SCRAMBLER_RESET (0x00C0 >> 2) 53 #define DP_VERSION_REGISTER (0x00F8 >> 2) 54 #define DP_CORE_ID (0x00FC >> 2) 55 56 #define DP_AUX_COMMAND_REGISTER (0x0100 >> 2) 57 #define AUX_ADDR_ONLY_MASK (0x1000) 58 #define AUX_COMMAND_MASK (0x0F00) 59 #define AUX_COMMAND_SHIFT (8) 60 #define AUX_COMMAND_NBYTES (0x000F) 61 62 #define DP_AUX_WRITE_FIFO (0x0104 >> 2) 63 #define DP_AUX_ADDRESS (0x0108 >> 2) 64 #define DP_AUX_CLOCK_DIVIDER (0x010C >> 2) 65 #define DP_TX_USER_FIFO_OVERFLOW (0x0110 >> 2) 66 #define DP_INTERRUPT_SIGNAL_STATE (0x0130 >> 2) 67 #define DP_AUX_REPLY_DATA (0x0134 >> 2) 68 #define DP_AUX_REPLY_CODE (0x0138 >> 2) 69 #define DP_AUX_REPLY_COUNT (0x013C >> 2) 70 #define DP_REPLY_DATA_COUNT (0x0148 >> 2) 71 #define DP_REPLY_STATUS (0x014C >> 2) 72 #define DP_HPD_DURATION (0x0150 >> 2) 73 #define DP_MAIN_STREAM_HTOTAL (0x0180 >> 2) 74 #define DP_MAIN_STREAM_VTOTAL (0x0184 >> 2) 75 #define DP_MAIN_STREAM_POLARITY (0x0188 >> 2) 76 #define DP_MAIN_STREAM_HSWIDTH (0x018C >> 2) 77 #define DP_MAIN_STREAM_VSWIDTH (0x0190 >> 2) 78 #define DP_MAIN_STREAM_HRES (0x0194 >> 2) 79 #define DP_MAIN_STREAM_VRES (0x0198 >> 2) 80 #define DP_MAIN_STREAM_HSTART (0x019C >> 2) 81 #define DP_MAIN_STREAM_VSTART (0x01A0 >> 2) 82 #define DP_MAIN_STREAM_MISC0 (0x01A4 >> 2) 83 #define DP_MAIN_STREAM_MISC1 (0x01A8 >> 2) 84 #define DP_MAIN_STREAM_M_VID (0x01AC >> 2) 85 #define DP_MSA_TRANSFER_UNIT_SIZE (0x01B0 >> 2) 86 #define DP_MAIN_STREAM_N_VID (0x01B4 >> 2) 87 #define DP_USER_DATA_COUNT_PER_LANE (0x01BC >> 2) 88 #define DP_MIN_BYTES_PER_TU (0x01C4 >> 2) 89 #define DP_FRAC_BYTES_PER_TU (0x01C8 >> 2) 90 #define DP_INIT_WAIT (0x01CC >> 2) 91 #define DP_PHY_RESET (0x0200 >> 2) 92 #define DP_PHY_VOLTAGE_DIFF_LANE_0 (0x0220 >> 2) 93 #define DP_PHY_VOLTAGE_DIFF_LANE_1 (0x0224 >> 2) 94 #define DP_TRANSMIT_PRBS7 (0x0230 >> 2) 95 #define DP_PHY_CLOCK_SELECT (0x0234 >> 2) 96 #define DP_TX_PHY_POWER_DOWN (0x0238 >> 2) 97 #define DP_PHY_PRECURSOR_LANE_0 (0x023C >> 2) 98 #define DP_PHY_PRECURSOR_LANE_1 (0x0240 >> 2) 99 #define DP_PHY_POSTCURSOR_LANE_0 (0x024C >> 2) 100 #define DP_PHY_POSTCURSOR_LANE_1 (0x0250 >> 2) 101 #define DP_PHY_STATUS (0x0280 >> 2) 102 103 #define DP_TX_AUDIO_CONTROL (0x0300 >> 2) 104 #define DP_TX_AUD_CTRL (1) 105 106 #define DP_TX_AUDIO_CHANNELS (0x0304 >> 2) 107 #define DP_TX_AUDIO_INFO_DATA(n) ((0x0308 + 4 * n) >> 2) 108 #define DP_TX_M_AUD (0x0328 >> 2) 109 #define DP_TX_N_AUD (0x032C >> 2) 110 #define DP_TX_AUDIO_EXT_DATA(n) ((0x0330 + 4 * n) >> 2) 111 #define DP_INT_STATUS (0x03A0 >> 2) 112 #define DP_INT_MASK (0x03A4 >> 2) 113 #define DP_INT_EN (0x03A8 >> 2) 114 #define DP_INT_DS (0x03AC >> 2) 115 116 /* 117 * Registers offset for Audio Video Buffer configuration. 118 */ 119 #define V_BLEND_OFFSET (0xA000) 120 #define V_BLEND_BG_CLR_0 (0x0000 >> 2) 121 #define V_BLEND_BG_CLR_1 (0x0004 >> 2) 122 #define V_BLEND_BG_CLR_2 (0x0008 >> 2) 123 #define V_BLEND_SET_GLOBAL_ALPHA_REG (0x000C >> 2) 124 #define V_BLEND_OUTPUT_VID_FORMAT (0x0014 >> 2) 125 #define V_BLEND_LAYER0_CONTROL (0x0018 >> 2) 126 #define V_BLEND_LAYER1_CONTROL (0x001C >> 2) 127 128 #define V_BLEND_RGB2YCBCR_COEFF(n) ((0x0020 + 4 * n) >> 2) 129 #define V_BLEND_IN1CSC_COEFF(n) ((0x0044 + 4 * n) >> 2) 130 131 #define V_BLEND_LUMA_IN1CSC_OFFSET (0x0068 >> 2) 132 #define V_BLEND_CR_IN1CSC_OFFSET (0x006C >> 2) 133 #define V_BLEND_CB_IN1CSC_OFFSET (0x0070 >> 2) 134 #define V_BLEND_LUMA_OUTCSC_OFFSET (0x0074 >> 2) 135 #define V_BLEND_CR_OUTCSC_OFFSET (0x0078 >> 2) 136 #define V_BLEND_CB_OUTCSC_OFFSET (0x007C >> 2) 137 138 #define V_BLEND_IN2CSC_COEFF(n) ((0x0080 + 4 * n) >> 2) 139 140 #define V_BLEND_LUMA_IN2CSC_OFFSET (0x00A4 >> 2) 141 #define V_BLEND_CR_IN2CSC_OFFSET (0x00A8 >> 2) 142 #define V_BLEND_CB_IN2CSC_OFFSET (0x00AC >> 2) 143 #define V_BLEND_CHROMA_KEY_ENABLE (0x01D0 >> 2) 144 #define V_BLEND_CHROMA_KEY_COMP1 (0x01D4 >> 2) 145 #define V_BLEND_CHROMA_KEY_COMP2 (0x01D8 >> 2) 146 #define V_BLEND_CHROMA_KEY_COMP3 (0x01DC >> 2) 147 148 /* 149 * Registers offset for Audio Video Buffer configuration. 150 */ 151 #define AV_BUF_MANAGER_OFFSET (0xB000) 152 #define AV_BUF_FORMAT (0x0000 >> 2) 153 #define AV_BUF_NON_LIVE_LATENCY (0x0008 >> 2) 154 #define AV_CHBUF0 (0x0010 >> 2) 155 #define AV_CHBUF1 (0x0014 >> 2) 156 #define AV_CHBUF2 (0x0018 >> 2) 157 #define AV_CHBUF3 (0x001C >> 2) 158 #define AV_CHBUF4 (0x0020 >> 2) 159 #define AV_CHBUF5 (0x0024 >> 2) 160 #define AV_BUF_STC_CONTROL (0x002C >> 2) 161 #define AV_BUF_STC_INIT_VALUE0 (0x0030 >> 2) 162 #define AV_BUF_STC_INIT_VALUE1 (0x0034 >> 2) 163 #define AV_BUF_STC_ADJ (0x0038 >> 2) 164 #define AV_BUF_STC_VIDEO_VSYNC_TS_REG0 (0x003C >> 2) 165 #define AV_BUF_STC_VIDEO_VSYNC_TS_REG1 (0x0040 >> 2) 166 #define AV_BUF_STC_EXT_VSYNC_TS_REG0 (0x0044 >> 2) 167 #define AV_BUF_STC_EXT_VSYNC_TS_REG1 (0x0048 >> 2) 168 #define AV_BUF_STC_CUSTOM_EVENT_TS_REG0 (0x004C >> 2) 169 #define AV_BUF_STC_CUSTOM_EVENT_TS_REG1 (0x0050 >> 2) 170 #define AV_BUF_STC_CUSTOM_EVENT2_TS_REG0 (0x0054 >> 2) 171 #define AV_BUF_STC_CUSTOM_EVENT2_TS_REG1 (0x0058 >> 2) 172 #define AV_BUF_STC_SNAPSHOT0 (0x0060 >> 2) 173 #define AV_BUF_STC_SNAPSHOT1 (0x0064 >> 2) 174 #define AV_BUF_OUTPUT_AUDIO_VIDEO_SELECT (0x0070 >> 2) 175 #define AV_BUF_HCOUNT_VCOUNT_INT0 (0x0074 >> 2) 176 #define AV_BUF_HCOUNT_VCOUNT_INT1 (0x0078 >> 2) 177 #define AV_BUF_DITHER_CONFIG (0x007C >> 2) 178 #define AV_BUF_DITHER_CONFIG_MAX (0x008C >> 2) 179 #define AV_BUF_DITHER_CONFIG_MIN (0x0090 >> 2) 180 #define AV_BUF_PATTERN_GEN_SELECT (0x0100 >> 2) 181 #define AV_BUF_AUD_VID_CLK_SOURCE (0x0120 >> 2) 182 #define AV_BUF_SRST_REG (0x0124 >> 2) 183 #define AV_BUF_AUDIO_RDY_INTERVAL (0x0128 >> 2) 184 #define AV_BUF_AUDIO_CH_CONFIG (0x012C >> 2) 185 186 #define AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(n)((0x0200 + 4 * n) >> 2) 187 188 #define AV_BUF_VIDEO_COMP_SCALE_FACTOR(n) ((0x020C + 4 * n) >> 2) 189 190 #define AV_BUF_LIVE_VIDEO_COMP_SF(n) ((0x0218 + 4 * n) >> 2) 191 192 #define AV_BUF_LIVE_VID_CONFIG (0x0224 >> 2) 193 194 #define AV_BUF_LIVE_GFX_COMP_SF(n) ((0x0228 + 4 * n) >> 2) 195 196 #define AV_BUF_LIVE_GFX_CONFIG (0x0234 >> 2) 197 198 #define AUDIO_MIXER_REGISTER_OFFSET (0xC000) 199 #define AUDIO_MIXER_VOLUME_CONTROL (0x0000 >> 2) 200 #define AUDIO_MIXER_META_DATA (0x0004 >> 2) 201 #define AUD_CH_STATUS_REG(n) ((0x0008 + 4 * n) >> 2) 202 #define AUD_CH_A_DATA_REG(n) ((0x0020 + 4 * n) >> 2) 203 #define AUD_CH_B_DATA_REG(n) ((0x0038 + 4 * n) >> 2) 204 205 #define DP_AUDIO_DMA_CHANNEL(n) (4 + n) 206 #define DP_GRAPHIC_DMA_CHANNEL (3) 207 #define DP_VIDEO_DMA_CHANNEL (0) 208 209 enum DPGraphicFmt { 210 DP_GRAPHIC_RGBA8888 = 0 << 8, 211 DP_GRAPHIC_ABGR8888 = 1 << 8, 212 DP_GRAPHIC_RGB888 = 2 << 8, 213 DP_GRAPHIC_BGR888 = 3 << 8, 214 DP_GRAPHIC_RGBA5551 = 4 << 8, 215 DP_GRAPHIC_RGBA4444 = 5 << 8, 216 DP_GRAPHIC_RGB565 = 6 << 8, 217 DP_GRAPHIC_8BPP = 7 << 8, 218 DP_GRAPHIC_4BPP = 8 << 8, 219 DP_GRAPHIC_2BPP = 9 << 8, 220 DP_GRAPHIC_1BPP = 10 << 8, 221 DP_GRAPHIC_MASK = 0xF << 8 222 }; 223 224 enum DPVideoFmt { 225 DP_NL_VID_CB_Y0_CR_Y1 = 0, 226 DP_NL_VID_CR_Y0_CB_Y1 = 1, 227 DP_NL_VID_Y0_CR_Y1_CB = 2, 228 DP_NL_VID_Y0_CB_Y1_CR = 3, 229 DP_NL_VID_YV16 = 4, 230 DP_NL_VID_YV24 = 5, 231 DP_NL_VID_YV16CL = 6, 232 DP_NL_VID_MONO = 7, 233 DP_NL_VID_YV16CL2 = 8, 234 DP_NL_VID_YUV444 = 9, 235 DP_NL_VID_RGB888 = 10, 236 DP_NL_VID_RGBA8880 = 11, 237 DP_NL_VID_RGB888_10BPC = 12, 238 DP_NL_VID_YUV444_10BPC = 13, 239 DP_NL_VID_YV16CL2_10BPC = 14, 240 DP_NL_VID_YV16CL_10BPC = 15, 241 DP_NL_VID_YV16_10BPC = 16, 242 DP_NL_VID_YV24_10BPC = 17, 243 DP_NL_VID_Y_ONLY_10BPC = 18, 244 DP_NL_VID_YV16_420 = 19, 245 DP_NL_VID_YV16CL_420 = 20, 246 DP_NL_VID_YV16CL2_420 = 21, 247 DP_NL_VID_YV16_420_10BPC = 22, 248 DP_NL_VID_YV16CL_420_10BPC = 23, 249 DP_NL_VID_YV16CL2_420_10BPC = 24, 250 DP_NL_VID_FMT_MASK = 0x1F 251 }; 252 253 typedef enum DPGraphicFmt DPGraphicFmt; 254 typedef enum DPVideoFmt DPVideoFmt; 255 256 static const VMStateDescription vmstate_dp = { 257 .name = TYPE_XLNX_DP, 258 .version_id = 1, 259 .fields = (VMStateField[]){ 260 VMSTATE_UINT32_ARRAY(core_registers, XlnxDPState, 261 DP_CORE_REG_ARRAY_SIZE), 262 VMSTATE_UINT32_ARRAY(avbufm_registers, XlnxDPState, 263 DP_AVBUF_REG_ARRAY_SIZE), 264 VMSTATE_UINT32_ARRAY(vblend_registers, XlnxDPState, 265 DP_VBLEND_REG_ARRAY_SIZE), 266 VMSTATE_UINT32_ARRAY(audio_registers, XlnxDPState, 267 DP_AUDIO_REG_ARRAY_SIZE), 268 VMSTATE_END_OF_LIST() 269 } 270 }; 271 272 static void xlnx_dp_update_irq(XlnxDPState *s); 273 274 static uint64_t xlnx_dp_audio_read(void *opaque, hwaddr offset, unsigned size) 275 { 276 XlnxDPState *s = XLNX_DP(opaque); 277 278 offset = offset >> 2; 279 return s->audio_registers[offset]; 280 } 281 282 static void xlnx_dp_audio_write(void *opaque, hwaddr offset, uint64_t value, 283 unsigned size) 284 { 285 XlnxDPState *s = XLNX_DP(opaque); 286 287 offset = offset >> 2; 288 289 switch (offset) { 290 case AUDIO_MIXER_META_DATA: 291 s->audio_registers[offset] = value & 0x00000001; 292 break; 293 default: 294 s->audio_registers[offset] = value; 295 break; 296 } 297 } 298 299 static const MemoryRegionOps audio_ops = { 300 .read = xlnx_dp_audio_read, 301 .write = xlnx_dp_audio_write, 302 .endianness = DEVICE_NATIVE_ENDIAN, 303 }; 304 305 static inline uint32_t xlnx_dp_audio_get_volume(XlnxDPState *s, 306 uint8_t channel) 307 { 308 switch (channel) { 309 case 0: 310 return extract32(s->audio_registers[AUDIO_MIXER_VOLUME_CONTROL], 0, 16); 311 case 1: 312 return extract32(s->audio_registers[AUDIO_MIXER_VOLUME_CONTROL], 16, 313 16); 314 default: 315 return 0; 316 } 317 } 318 319 static inline void xlnx_dp_audio_activate(XlnxDPState *s) 320 { 321 bool activated = ((s->core_registers[DP_TX_AUDIO_CONTROL] 322 & DP_TX_AUD_CTRL) != 0); 323 AUD_set_active_out(s->amixer_output_stream, activated); 324 xlnx_dpdma_set_host_data_location(s->dpdma, DP_AUDIO_DMA_CHANNEL(0), 325 &s->audio_buffer_0); 326 xlnx_dpdma_set_host_data_location(s->dpdma, DP_AUDIO_DMA_CHANNEL(1), 327 &s->audio_buffer_1); 328 } 329 330 static inline void xlnx_dp_audio_mix_buffer(XlnxDPState *s) 331 { 332 /* 333 * Audio packets are signed and have this shape: 334 * | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 335 * | R3 | L3 | R2 | L2 | R1 | L1 | R0 | L0 | 336 * 337 * Output audio is 16bits saturated. 338 */ 339 int i; 340 341 if ((s->audio_data_available[0]) && (xlnx_dp_audio_get_volume(s, 0))) { 342 for (i = 0; i < s->audio_data_available[0] / 2; i++) { 343 s->temp_buffer[i] = (int64_t)(s->audio_buffer_0[i]) 344 * xlnx_dp_audio_get_volume(s, 0) / 8192; 345 } 346 s->byte_left = s->audio_data_available[0]; 347 } else { 348 memset(s->temp_buffer, 0, s->audio_data_available[1] / 2); 349 } 350 351 if ((s->audio_data_available[1]) && (xlnx_dp_audio_get_volume(s, 1))) { 352 if ((s->audio_data_available[0] == 0) 353 || (s->audio_data_available[1] == s->audio_data_available[0])) { 354 for (i = 0; i < s->audio_data_available[1] / 2; i++) { 355 s->temp_buffer[i] += (int64_t)(s->audio_buffer_1[i]) 356 * xlnx_dp_audio_get_volume(s, 1) / 8192; 357 } 358 s->byte_left = s->audio_data_available[1]; 359 } 360 } 361 362 for (i = 0; i < s->byte_left / 2; i++) { 363 s->out_buffer[i] = MAX(-32767, MIN(s->temp_buffer[i], 32767)); 364 } 365 366 s->data_ptr = 0; 367 } 368 369 static void xlnx_dp_audio_callback(void *opaque, int avail) 370 { 371 /* 372 * Get some data from the DPDMA and compute these datas. 373 * Then wait for QEMU's audio subsystem to call this callback. 374 */ 375 XlnxDPState *s = XLNX_DP(opaque); 376 size_t written = 0; 377 378 /* If there are already some data don't get more data. */ 379 if (s->byte_left == 0) { 380 s->audio_data_available[0] = xlnx_dpdma_start_operation(s->dpdma, 4, 381 true); 382 s->audio_data_available[1] = xlnx_dpdma_start_operation(s->dpdma, 5, 383 true); 384 xlnx_dp_audio_mix_buffer(s); 385 } 386 387 /* Send the buffer through the audio. */ 388 if (s->byte_left <= MAX_QEMU_BUFFER_SIZE) { 389 if (s->byte_left != 0) { 390 written = AUD_write(s->amixer_output_stream, 391 &s->out_buffer[s->data_ptr], s->byte_left); 392 } else { 393 /* 394 * There is nothing to play.. We don't have any data! Fill the 395 * buffer with zero's and send it. 396 */ 397 written = 0; 398 memset(s->out_buffer, 0, 1024); 399 AUD_write(s->amixer_output_stream, s->out_buffer, 1024); 400 } 401 } else { 402 written = AUD_write(s->amixer_output_stream, 403 &s->out_buffer[s->data_ptr], MAX_QEMU_BUFFER_SIZE); 404 } 405 s->byte_left -= written; 406 s->data_ptr += written; 407 } 408 409 /* 410 * AUX channel related function. 411 */ 412 static void xlnx_dp_aux_clear_rx_fifo(XlnxDPState *s) 413 { 414 fifo8_reset(&s->rx_fifo); 415 } 416 417 static void xlnx_dp_aux_push_rx_fifo(XlnxDPState *s, uint8_t *buf, size_t len) 418 { 419 DPRINTF("Push %u data in rx_fifo\n", (unsigned)len); 420 fifo8_push_all(&s->rx_fifo, buf, len); 421 } 422 423 static uint8_t xlnx_dp_aux_pop_rx_fifo(XlnxDPState *s) 424 { 425 uint8_t ret; 426 427 if (fifo8_is_empty(&s->rx_fifo)) { 428 DPRINTF("rx_fifo underflow..\n"); 429 abort(); 430 } 431 ret = fifo8_pop(&s->rx_fifo); 432 DPRINTF("pop 0x%" PRIX8 " from rx_fifo.\n", ret); 433 return ret; 434 } 435 436 static void xlnx_dp_aux_clear_tx_fifo(XlnxDPState *s) 437 { 438 fifo8_reset(&s->tx_fifo); 439 } 440 441 static void xlnx_dp_aux_push_tx_fifo(XlnxDPState *s, uint8_t *buf, size_t len) 442 { 443 DPRINTF("Push %u data in tx_fifo\n", (unsigned)len); 444 fifo8_push_all(&s->tx_fifo, buf, len); 445 } 446 447 static uint8_t xlnx_dp_aux_pop_tx_fifo(XlnxDPState *s) 448 { 449 uint8_t ret; 450 451 if (fifo8_is_empty(&s->tx_fifo)) { 452 DPRINTF("tx_fifo underflow..\n"); 453 abort(); 454 } 455 ret = fifo8_pop(&s->tx_fifo); 456 DPRINTF("pop 0x%2.2X from tx_fifo.\n", ret); 457 return ret; 458 } 459 460 static uint32_t xlnx_dp_aux_get_address(XlnxDPState *s) 461 { 462 return s->core_registers[DP_AUX_ADDRESS]; 463 } 464 465 /* 466 * Get command from the register. 467 */ 468 static void xlnx_dp_aux_set_command(XlnxDPState *s, uint32_t value) 469 { 470 bool address_only = (value & AUX_ADDR_ONLY_MASK) != 0; 471 AUXCommand cmd = (value & AUX_COMMAND_MASK) >> AUX_COMMAND_SHIFT; 472 uint8_t nbytes = (value & AUX_COMMAND_NBYTES) + 1; 473 uint8_t buf[16]; 474 int i; 475 476 /* 477 * When an address_only command is executed nothing happen to the fifo, so 478 * just make nbytes = 0. 479 */ 480 if (address_only) { 481 nbytes = 0; 482 } 483 484 switch (cmd) { 485 case READ_AUX: 486 case READ_I2C: 487 case READ_I2C_MOT: 488 s->core_registers[DP_AUX_REPLY_CODE] = aux_request(s->aux_bus, cmd, 489 xlnx_dp_aux_get_address(s), 490 nbytes, buf); 491 s->core_registers[DP_REPLY_DATA_COUNT] = nbytes; 492 493 if (s->core_registers[DP_AUX_REPLY_CODE] == AUX_I2C_ACK) { 494 xlnx_dp_aux_push_rx_fifo(s, buf, nbytes); 495 } 496 break; 497 case WRITE_AUX: 498 case WRITE_I2C: 499 case WRITE_I2C_MOT: 500 for (i = 0; i < nbytes; i++) { 501 buf[i] = xlnx_dp_aux_pop_tx_fifo(s); 502 } 503 s->core_registers[DP_AUX_REPLY_CODE] = aux_request(s->aux_bus, cmd, 504 xlnx_dp_aux_get_address(s), 505 nbytes, buf); 506 xlnx_dp_aux_clear_tx_fifo(s); 507 break; 508 case WRITE_I2C_STATUS: 509 qemu_log_mask(LOG_UNIMP, "xlnx_dp: Write i2c status not implemented\n"); 510 break; 511 default: 512 abort(); 513 } 514 515 s->core_registers[DP_INTERRUPT_SIGNAL_STATE] |= 0x04; 516 } 517 518 static void xlnx_dp_set_dpdma(const Object *obj, const char *name, Object *val, 519 Error **errp) 520 { 521 XlnxDPState *s = XLNX_DP(obj); 522 if (s->console) { 523 DisplaySurface *surface = qemu_console_surface(s->console); 524 XlnxDPDMAState *dma = XLNX_DPDMA(val); 525 xlnx_dpdma_set_host_data_location(dma, DP_GRAPHIC_DMA_CHANNEL, 526 surface_data(surface)); 527 } 528 } 529 530 static inline uint8_t xlnx_dp_global_alpha_value(XlnxDPState *s) 531 { 532 return (s->vblend_registers[V_BLEND_SET_GLOBAL_ALPHA_REG] & 0x1FE) >> 1; 533 } 534 535 static inline bool xlnx_dp_global_alpha_enabled(XlnxDPState *s) 536 { 537 /* 538 * If the alpha is totally opaque (255) we consider the alpha is disabled to 539 * reduce CPU consumption. 540 */ 541 return ((xlnx_dp_global_alpha_value(s) != 0xFF) && 542 ((s->vblend_registers[V_BLEND_SET_GLOBAL_ALPHA_REG] & 0x01) != 0)); 543 } 544 545 static void xlnx_dp_recreate_surface(XlnxDPState *s) 546 { 547 /* 548 * Two possibilities, if blending is enabled the console displays 549 * bout_plane, if not g_plane is displayed. 550 */ 551 uint16_t width = s->core_registers[DP_MAIN_STREAM_HRES]; 552 uint16_t height = s->core_registers[DP_MAIN_STREAM_VRES]; 553 DisplaySurface *current_console_surface = qemu_console_surface(s->console); 554 555 if ((width != 0) && (height != 0)) { 556 /* 557 * As dpy_gfx_replace_surface calls qemu_free_displaysurface on the 558 * surface we need to be careful and don't free the surface associated 559 * to the console or double free will happen. 560 */ 561 if (s->bout_plane.surface != current_console_surface) { 562 qemu_free_displaysurface(s->bout_plane.surface); 563 } 564 if (s->v_plane.surface != current_console_surface) { 565 qemu_free_displaysurface(s->v_plane.surface); 566 } 567 if (s->g_plane.surface != current_console_surface) { 568 qemu_free_displaysurface(s->g_plane.surface); 569 } 570 571 s->g_plane.surface 572 = qemu_create_displaysurface_from(width, height, 573 s->g_plane.format, 0, NULL); 574 s->v_plane.surface 575 = qemu_create_displaysurface_from(width, height, 576 s->v_plane.format, 0, NULL); 577 if (xlnx_dp_global_alpha_enabled(s)) { 578 s->bout_plane.surface = 579 qemu_create_displaysurface_from(width, 580 height, 581 s->g_plane.format, 582 0, NULL); 583 dpy_gfx_replace_surface(s->console, s->bout_plane.surface); 584 } else { 585 s->bout_plane.surface = NULL; 586 dpy_gfx_replace_surface(s->console, s->g_plane.surface); 587 } 588 589 xlnx_dpdma_set_host_data_location(s->dpdma, DP_GRAPHIC_DMA_CHANNEL, 590 surface_data(s->g_plane.surface)); 591 xlnx_dpdma_set_host_data_location(s->dpdma, DP_VIDEO_DMA_CHANNEL, 592 surface_data(s->v_plane.surface)); 593 } 594 } 595 596 /* 597 * Change the graphic format of the surface. 598 */ 599 static void xlnx_dp_change_graphic_fmt(XlnxDPState *s) 600 { 601 switch (s->avbufm_registers[AV_BUF_FORMAT] & DP_GRAPHIC_MASK) { 602 case DP_GRAPHIC_RGBA8888: 603 s->g_plane.format = PIXMAN_r8g8b8a8; 604 break; 605 case DP_GRAPHIC_ABGR8888: 606 s->g_plane.format = PIXMAN_a8b8g8r8; 607 break; 608 case DP_GRAPHIC_RGB565: 609 s->g_plane.format = PIXMAN_r5g6b5; 610 break; 611 case DP_GRAPHIC_RGB888: 612 s->g_plane.format = PIXMAN_r8g8b8; 613 break; 614 case DP_GRAPHIC_BGR888: 615 s->g_plane.format = PIXMAN_b8g8r8; 616 break; 617 default: 618 DPRINTF("error: unsupported graphic format %u.\n", 619 s->avbufm_registers[AV_BUF_FORMAT] & DP_GRAPHIC_MASK); 620 abort(); 621 } 622 623 switch (s->avbufm_registers[AV_BUF_FORMAT] & DP_NL_VID_FMT_MASK) { 624 case 0: 625 s->v_plane.format = PIXMAN_x8b8g8r8; 626 break; 627 case DP_NL_VID_Y0_CB_Y1_CR: 628 s->v_plane.format = PIXMAN_yuy2; 629 break; 630 case DP_NL_VID_RGBA8880: 631 s->v_plane.format = PIXMAN_x8b8g8r8; 632 break; 633 default: 634 DPRINTF("error: unsupported video format %u.\n", 635 s->avbufm_registers[AV_BUF_FORMAT] & DP_NL_VID_FMT_MASK); 636 abort(); 637 } 638 639 xlnx_dp_recreate_surface(s); 640 } 641 642 static void xlnx_dp_update_irq(XlnxDPState *s) 643 { 644 uint32_t flags; 645 646 flags = s->core_registers[DP_INT_STATUS] & ~s->core_registers[DP_INT_MASK]; 647 DPRINTF("update IRQ value = %" PRIx32 "\n", flags); 648 qemu_set_irq(s->irq, flags != 0); 649 } 650 651 static uint64_t xlnx_dp_read(void *opaque, hwaddr offset, unsigned size) 652 { 653 XlnxDPState *s = XLNX_DP(opaque); 654 uint64_t ret = 0; 655 656 offset = offset >> 2; 657 658 switch (offset) { 659 case DP_TX_USER_FIFO_OVERFLOW: 660 /* This register is cleared after a read */ 661 ret = s->core_registers[DP_TX_USER_FIFO_OVERFLOW]; 662 s->core_registers[DP_TX_USER_FIFO_OVERFLOW] = 0; 663 break; 664 case DP_AUX_REPLY_DATA: 665 ret = xlnx_dp_aux_pop_rx_fifo(s); 666 break; 667 case DP_INTERRUPT_SIGNAL_STATE: 668 /* 669 * XXX: Not sure it is the right thing to do actually. 670 * The register is not written by the device driver so it's stuck 671 * to 0x04. 672 */ 673 ret = s->core_registers[DP_INTERRUPT_SIGNAL_STATE]; 674 s->core_registers[DP_INTERRUPT_SIGNAL_STATE] &= ~0x04; 675 break; 676 case DP_AUX_WRITE_FIFO: 677 case DP_TX_AUDIO_INFO_DATA(0): 678 case DP_TX_AUDIO_INFO_DATA(1): 679 case DP_TX_AUDIO_INFO_DATA(2): 680 case DP_TX_AUDIO_INFO_DATA(3): 681 case DP_TX_AUDIO_INFO_DATA(4): 682 case DP_TX_AUDIO_INFO_DATA(5): 683 case DP_TX_AUDIO_INFO_DATA(6): 684 case DP_TX_AUDIO_INFO_DATA(7): 685 case DP_TX_AUDIO_EXT_DATA(0): 686 case DP_TX_AUDIO_EXT_DATA(1): 687 case DP_TX_AUDIO_EXT_DATA(2): 688 case DP_TX_AUDIO_EXT_DATA(3): 689 case DP_TX_AUDIO_EXT_DATA(4): 690 case DP_TX_AUDIO_EXT_DATA(5): 691 case DP_TX_AUDIO_EXT_DATA(6): 692 case DP_TX_AUDIO_EXT_DATA(7): 693 case DP_TX_AUDIO_EXT_DATA(8): 694 /* write only registers */ 695 ret = 0; 696 break; 697 default: 698 assert(offset <= (0x3AC >> 2)); 699 ret = s->core_registers[offset]; 700 break; 701 } 702 703 DPRINTF("core read @%" PRIx64 " = 0x%8.8" PRIX64 "\n", offset << 2, ret); 704 return ret; 705 } 706 707 static void xlnx_dp_write(void *opaque, hwaddr offset, uint64_t value, 708 unsigned size) 709 { 710 XlnxDPState *s = XLNX_DP(opaque); 711 712 DPRINTF("core write @%" PRIx64 " = 0x%8.8" PRIX64 "\n", offset, value); 713 714 offset = offset >> 2; 715 716 switch (offset) { 717 /* 718 * Only special write case are handled. 719 */ 720 case DP_LINK_BW_SET: 721 s->core_registers[offset] = value & 0x000000FF; 722 break; 723 case DP_LANE_COUNT_SET: 724 case DP_MAIN_STREAM_MISC0: 725 s->core_registers[offset] = value & 0x0000000F; 726 break; 727 case DP_TRAINING_PATTERN_SET: 728 case DP_LINK_QUAL_PATTERN_SET: 729 case DP_MAIN_STREAM_POLARITY: 730 case DP_PHY_VOLTAGE_DIFF_LANE_0: 731 case DP_PHY_VOLTAGE_DIFF_LANE_1: 732 s->core_registers[offset] = value & 0x00000003; 733 break; 734 case DP_ENHANCED_FRAME_EN: 735 case DP_SCRAMBLING_DISABLE: 736 case DP_DOWNSPREAD_CTRL: 737 case DP_MAIN_STREAM_ENABLE: 738 case DP_TRANSMIT_PRBS7: 739 s->core_registers[offset] = value & 0x00000001; 740 break; 741 case DP_PHY_CLOCK_SELECT: 742 s->core_registers[offset] = value & 0x00000007; 743 break; 744 case DP_SOFTWARE_RESET: 745 /* 746 * No need to update this bit as it's read '0'. 747 */ 748 /* 749 * TODO: reset IP. 750 */ 751 break; 752 case DP_TRANSMITTER_ENABLE: 753 s->core_registers[offset] = value & 0x01; 754 break; 755 case DP_FORCE_SCRAMBLER_RESET: 756 /* 757 * No need to update this bit as it's read '0'. 758 */ 759 /* 760 * TODO: force a scrambler reset?? 761 */ 762 break; 763 case DP_AUX_COMMAND_REGISTER: 764 s->core_registers[offset] = value & 0x00001F0F; 765 xlnx_dp_aux_set_command(s, s->core_registers[offset]); 766 break; 767 case DP_MAIN_STREAM_HTOTAL: 768 case DP_MAIN_STREAM_VTOTAL: 769 case DP_MAIN_STREAM_HSTART: 770 case DP_MAIN_STREAM_VSTART: 771 s->core_registers[offset] = value & 0x0000FFFF; 772 break; 773 case DP_MAIN_STREAM_HRES: 774 case DP_MAIN_STREAM_VRES: 775 s->core_registers[offset] = value & 0x0000FFFF; 776 xlnx_dp_recreate_surface(s); 777 break; 778 case DP_MAIN_STREAM_HSWIDTH: 779 case DP_MAIN_STREAM_VSWIDTH: 780 s->core_registers[offset] = value & 0x00007FFF; 781 break; 782 case DP_MAIN_STREAM_MISC1: 783 s->core_registers[offset] = value & 0x00000086; 784 break; 785 case DP_MAIN_STREAM_M_VID: 786 case DP_MAIN_STREAM_N_VID: 787 s->core_registers[offset] = value & 0x00FFFFFF; 788 break; 789 case DP_MSA_TRANSFER_UNIT_SIZE: 790 case DP_MIN_BYTES_PER_TU: 791 case DP_INIT_WAIT: 792 s->core_registers[offset] = value & 0x00000007; 793 break; 794 case DP_USER_DATA_COUNT_PER_LANE: 795 s->core_registers[offset] = value & 0x0003FFFF; 796 break; 797 case DP_FRAC_BYTES_PER_TU: 798 s->core_registers[offset] = value & 0x000003FF; 799 break; 800 case DP_PHY_RESET: 801 s->core_registers[offset] = value & 0x00010003; 802 /* 803 * TODO: Reset something? 804 */ 805 break; 806 case DP_TX_PHY_POWER_DOWN: 807 s->core_registers[offset] = value & 0x0000000F; 808 /* 809 * TODO: Power down things? 810 */ 811 break; 812 case DP_AUX_WRITE_FIFO: { 813 uint8_t c = value; 814 xlnx_dp_aux_push_tx_fifo(s, &c, 1); 815 break; 816 } 817 case DP_AUX_CLOCK_DIVIDER: 818 break; 819 case DP_AUX_REPLY_COUNT: 820 /* 821 * Writing to this register clear the counter. 822 */ 823 s->core_registers[offset] = 0x00000000; 824 break; 825 case DP_AUX_ADDRESS: 826 s->core_registers[offset] = value & 0x000FFFFF; 827 break; 828 case DP_VERSION_REGISTER: 829 case DP_CORE_ID: 830 case DP_TX_USER_FIFO_OVERFLOW: 831 case DP_AUX_REPLY_DATA: 832 case DP_AUX_REPLY_CODE: 833 case DP_REPLY_DATA_COUNT: 834 case DP_REPLY_STATUS: 835 case DP_HPD_DURATION: 836 /* 837 * Write to read only location.. 838 */ 839 break; 840 case DP_TX_AUDIO_CONTROL: 841 s->core_registers[offset] = value & 0x00000001; 842 xlnx_dp_audio_activate(s); 843 break; 844 case DP_TX_AUDIO_CHANNELS: 845 s->core_registers[offset] = value & 0x00000007; 846 xlnx_dp_audio_activate(s); 847 break; 848 case DP_INT_STATUS: 849 s->core_registers[DP_INT_STATUS] &= ~value; 850 xlnx_dp_update_irq(s); 851 break; 852 case DP_INT_EN: 853 s->core_registers[DP_INT_MASK] &= ~value; 854 xlnx_dp_update_irq(s); 855 break; 856 case DP_INT_DS: 857 s->core_registers[DP_INT_MASK] |= ~value; 858 xlnx_dp_update_irq(s); 859 break; 860 default: 861 assert(offset <= (0x504C >> 2)); 862 s->core_registers[offset] = value; 863 break; 864 } 865 } 866 867 static const MemoryRegionOps dp_ops = { 868 .read = xlnx_dp_read, 869 .write = xlnx_dp_write, 870 .endianness = DEVICE_NATIVE_ENDIAN, 871 .valid = { 872 .min_access_size = 4, 873 .max_access_size = 4, 874 }, 875 .impl = { 876 .min_access_size = 4, 877 .max_access_size = 4, 878 }, 879 }; 880 881 /* 882 * This is to handle Read/Write to the Video Blender. 883 */ 884 static void xlnx_dp_vblend_write(void *opaque, hwaddr offset, 885 uint64_t value, unsigned size) 886 { 887 XlnxDPState *s = XLNX_DP(opaque); 888 bool alpha_was_enabled; 889 890 DPRINTF("vblend: write @0x%" HWADDR_PRIX " = 0x%" PRIX32 "\n", offset, 891 (uint32_t)value); 892 offset = offset >> 2; 893 894 switch (offset) { 895 case V_BLEND_BG_CLR_0: 896 case V_BLEND_BG_CLR_1: 897 case V_BLEND_BG_CLR_2: 898 s->vblend_registers[offset] = value & 0x00000FFF; 899 break; 900 case V_BLEND_SET_GLOBAL_ALPHA_REG: 901 /* 902 * A write to this register can enable or disable blending. Thus we need 903 * to recreate the surfaces. 904 */ 905 alpha_was_enabled = xlnx_dp_global_alpha_enabled(s); 906 s->vblend_registers[offset] = value & 0x000001FF; 907 if (xlnx_dp_global_alpha_enabled(s) != alpha_was_enabled) { 908 xlnx_dp_recreate_surface(s); 909 } 910 break; 911 case V_BLEND_OUTPUT_VID_FORMAT: 912 s->vblend_registers[offset] = value & 0x00000017; 913 break; 914 case V_BLEND_LAYER0_CONTROL: 915 case V_BLEND_LAYER1_CONTROL: 916 s->vblend_registers[offset] = value & 0x00000103; 917 break; 918 case V_BLEND_RGB2YCBCR_COEFF(0): 919 case V_BLEND_RGB2YCBCR_COEFF(1): 920 case V_BLEND_RGB2YCBCR_COEFF(2): 921 case V_BLEND_RGB2YCBCR_COEFF(3): 922 case V_BLEND_RGB2YCBCR_COEFF(4): 923 case V_BLEND_RGB2YCBCR_COEFF(5): 924 case V_BLEND_RGB2YCBCR_COEFF(6): 925 case V_BLEND_RGB2YCBCR_COEFF(7): 926 case V_BLEND_RGB2YCBCR_COEFF(8): 927 case V_BLEND_IN1CSC_COEFF(0): 928 case V_BLEND_IN1CSC_COEFF(1): 929 case V_BLEND_IN1CSC_COEFF(2): 930 case V_BLEND_IN1CSC_COEFF(3): 931 case V_BLEND_IN1CSC_COEFF(4): 932 case V_BLEND_IN1CSC_COEFF(5): 933 case V_BLEND_IN1CSC_COEFF(6): 934 case V_BLEND_IN1CSC_COEFF(7): 935 case V_BLEND_IN1CSC_COEFF(8): 936 case V_BLEND_IN2CSC_COEFF(0): 937 case V_BLEND_IN2CSC_COEFF(1): 938 case V_BLEND_IN2CSC_COEFF(2): 939 case V_BLEND_IN2CSC_COEFF(3): 940 case V_BLEND_IN2CSC_COEFF(4): 941 case V_BLEND_IN2CSC_COEFF(5): 942 case V_BLEND_IN2CSC_COEFF(6): 943 case V_BLEND_IN2CSC_COEFF(7): 944 case V_BLEND_IN2CSC_COEFF(8): 945 s->vblend_registers[offset] = value & 0x0000FFFF; 946 break; 947 case V_BLEND_LUMA_IN1CSC_OFFSET: 948 case V_BLEND_CR_IN1CSC_OFFSET: 949 case V_BLEND_CB_IN1CSC_OFFSET: 950 case V_BLEND_LUMA_IN2CSC_OFFSET: 951 case V_BLEND_CR_IN2CSC_OFFSET: 952 case V_BLEND_CB_IN2CSC_OFFSET: 953 case V_BLEND_LUMA_OUTCSC_OFFSET: 954 case V_BLEND_CR_OUTCSC_OFFSET: 955 case V_BLEND_CB_OUTCSC_OFFSET: 956 s->vblend_registers[offset] = value & 0x3FFF7FFF; 957 break; 958 case V_BLEND_CHROMA_KEY_ENABLE: 959 s->vblend_registers[offset] = value & 0x00000003; 960 break; 961 case V_BLEND_CHROMA_KEY_COMP1: 962 case V_BLEND_CHROMA_KEY_COMP2: 963 case V_BLEND_CHROMA_KEY_COMP3: 964 s->vblend_registers[offset] = value & 0x0FFF0FFF; 965 break; 966 default: 967 s->vblend_registers[offset] = value; 968 break; 969 } 970 } 971 972 static uint64_t xlnx_dp_vblend_read(void *opaque, hwaddr offset, 973 unsigned size) 974 { 975 XlnxDPState *s = XLNX_DP(opaque); 976 977 DPRINTF("vblend: read @0x%" HWADDR_PRIX " = 0x%" PRIX32 "\n", offset, 978 s->vblend_registers[offset >> 2]); 979 return s->vblend_registers[offset >> 2]; 980 } 981 982 static const MemoryRegionOps vblend_ops = { 983 .read = xlnx_dp_vblend_read, 984 .write = xlnx_dp_vblend_write, 985 .endianness = DEVICE_NATIVE_ENDIAN, 986 .valid = { 987 .min_access_size = 4, 988 .max_access_size = 4, 989 }, 990 .impl = { 991 .min_access_size = 4, 992 .max_access_size = 4, 993 }, 994 }; 995 996 /* 997 * This is to handle Read/Write to the Audio Video buffer manager. 998 */ 999 static void xlnx_dp_avbufm_write(void *opaque, hwaddr offset, uint64_t value, 1000 unsigned size) 1001 { 1002 XlnxDPState *s = XLNX_DP(opaque); 1003 1004 DPRINTF("avbufm: write @0x%" HWADDR_PRIX " = 0x%" PRIX32 "\n", offset, 1005 (uint32_t)value); 1006 offset = offset >> 2; 1007 1008 switch (offset) { 1009 case AV_BUF_FORMAT: 1010 s->avbufm_registers[offset] = value & 0x00000FFF; 1011 xlnx_dp_change_graphic_fmt(s); 1012 break; 1013 case AV_CHBUF0: 1014 case AV_CHBUF1: 1015 case AV_CHBUF2: 1016 case AV_CHBUF3: 1017 case AV_CHBUF4: 1018 case AV_CHBUF5: 1019 s->avbufm_registers[offset] = value & 0x0000007F; 1020 break; 1021 case AV_BUF_OUTPUT_AUDIO_VIDEO_SELECT: 1022 s->avbufm_registers[offset] = value & 0x0000007F; 1023 break; 1024 case AV_BUF_DITHER_CONFIG: 1025 s->avbufm_registers[offset] = value & 0x000007FF; 1026 break; 1027 case AV_BUF_DITHER_CONFIG_MAX: 1028 case AV_BUF_DITHER_CONFIG_MIN: 1029 s->avbufm_registers[offset] = value & 0x00000FFF; 1030 break; 1031 case AV_BUF_PATTERN_GEN_SELECT: 1032 s->avbufm_registers[offset] = value & 0xFFFFFF03; 1033 break; 1034 case AV_BUF_AUD_VID_CLK_SOURCE: 1035 s->avbufm_registers[offset] = value & 0x00000007; 1036 break; 1037 case AV_BUF_SRST_REG: 1038 s->avbufm_registers[offset] = value & 0x00000002; 1039 break; 1040 case AV_BUF_AUDIO_CH_CONFIG: 1041 s->avbufm_registers[offset] = value & 0x00000003; 1042 break; 1043 case AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(0): 1044 case AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(1): 1045 case AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(2): 1046 case AV_BUF_VIDEO_COMP_SCALE_FACTOR(0): 1047 case AV_BUF_VIDEO_COMP_SCALE_FACTOR(1): 1048 case AV_BUF_VIDEO_COMP_SCALE_FACTOR(2): 1049 s->avbufm_registers[offset] = value & 0x0000FFFF; 1050 break; 1051 case AV_BUF_LIVE_VIDEO_COMP_SF(0): 1052 case AV_BUF_LIVE_VIDEO_COMP_SF(1): 1053 case AV_BUF_LIVE_VIDEO_COMP_SF(2): 1054 case AV_BUF_LIVE_VID_CONFIG: 1055 case AV_BUF_LIVE_GFX_COMP_SF(0): 1056 case AV_BUF_LIVE_GFX_COMP_SF(1): 1057 case AV_BUF_LIVE_GFX_COMP_SF(2): 1058 case AV_BUF_LIVE_GFX_CONFIG: 1059 case AV_BUF_NON_LIVE_LATENCY: 1060 case AV_BUF_STC_CONTROL: 1061 case AV_BUF_STC_INIT_VALUE0: 1062 case AV_BUF_STC_INIT_VALUE1: 1063 case AV_BUF_STC_ADJ: 1064 case AV_BUF_STC_VIDEO_VSYNC_TS_REG0: 1065 case AV_BUF_STC_VIDEO_VSYNC_TS_REG1: 1066 case AV_BUF_STC_EXT_VSYNC_TS_REG0: 1067 case AV_BUF_STC_EXT_VSYNC_TS_REG1: 1068 case AV_BUF_STC_CUSTOM_EVENT_TS_REG0: 1069 case AV_BUF_STC_CUSTOM_EVENT_TS_REG1: 1070 case AV_BUF_STC_CUSTOM_EVENT2_TS_REG0: 1071 case AV_BUF_STC_CUSTOM_EVENT2_TS_REG1: 1072 case AV_BUF_STC_SNAPSHOT0: 1073 case AV_BUF_STC_SNAPSHOT1: 1074 case AV_BUF_HCOUNT_VCOUNT_INT0: 1075 case AV_BUF_HCOUNT_VCOUNT_INT1: 1076 qemu_log_mask(LOG_UNIMP, "avbufm: unimplmented"); 1077 break; 1078 default: 1079 s->avbufm_registers[offset] = value; 1080 break; 1081 } 1082 } 1083 1084 static uint64_t xlnx_dp_avbufm_read(void *opaque, hwaddr offset, 1085 unsigned size) 1086 { 1087 XlnxDPState *s = XLNX_DP(opaque); 1088 1089 offset = offset >> 2; 1090 return s->avbufm_registers[offset]; 1091 } 1092 1093 static const MemoryRegionOps avbufm_ops = { 1094 .read = xlnx_dp_avbufm_read, 1095 .write = xlnx_dp_avbufm_write, 1096 .endianness = DEVICE_NATIVE_ENDIAN, 1097 .valid = { 1098 .min_access_size = 4, 1099 .max_access_size = 4, 1100 }, 1101 .impl = { 1102 .min_access_size = 4, 1103 .max_access_size = 4, 1104 }, 1105 }; 1106 1107 /* 1108 * This is a global alpha blending using pixman. 1109 * Both graphic and video planes are multiplied with the global alpha 1110 * coefficient and added. 1111 */ 1112 static inline void xlnx_dp_blend_surface(XlnxDPState *s) 1113 { 1114 pixman_fixed_t alpha1[] = { pixman_double_to_fixed(1), 1115 pixman_double_to_fixed(1), 1116 pixman_double_to_fixed(1.0) }; 1117 pixman_fixed_t alpha2[] = { pixman_double_to_fixed(1), 1118 pixman_double_to_fixed(1), 1119 pixman_double_to_fixed(1.0) }; 1120 1121 if ((surface_width(s->g_plane.surface) 1122 != surface_width(s->v_plane.surface)) || 1123 (surface_height(s->g_plane.surface) 1124 != surface_height(s->v_plane.surface))) { 1125 return; 1126 } 1127 1128 alpha1[2] = pixman_double_to_fixed((double)(xlnx_dp_global_alpha_value(s)) 1129 / 256.0); 1130 alpha2[2] = pixman_double_to_fixed((255.0 1131 - (double)xlnx_dp_global_alpha_value(s)) 1132 / 256.0); 1133 1134 pixman_image_set_filter(s->g_plane.surface->image, 1135 PIXMAN_FILTER_CONVOLUTION, alpha1, 3); 1136 pixman_image_composite(PIXMAN_OP_SRC, s->g_plane.surface->image, 0, 1137 s->bout_plane.surface->image, 0, 0, 0, 0, 0, 0, 1138 surface_width(s->g_plane.surface), 1139 surface_height(s->g_plane.surface)); 1140 pixman_image_set_filter(s->v_plane.surface->image, 1141 PIXMAN_FILTER_CONVOLUTION, alpha2, 3); 1142 pixman_image_composite(PIXMAN_OP_ADD, s->v_plane.surface->image, 0, 1143 s->bout_plane.surface->image, 0, 0, 0, 0, 0, 0, 1144 surface_width(s->g_plane.surface), 1145 surface_height(s->g_plane.surface)); 1146 } 1147 1148 static void xlnx_dp_update_display(void *opaque) 1149 { 1150 XlnxDPState *s = XLNX_DP(opaque); 1151 1152 if ((s->core_registers[DP_TRANSMITTER_ENABLE] & 0x01) == 0) { 1153 return; 1154 } 1155 1156 s->core_registers[DP_INT_STATUS] |= (1 << 13); 1157 xlnx_dp_update_irq(s); 1158 1159 xlnx_dpdma_trigger_vsync_irq(s->dpdma); 1160 1161 /* 1162 * Trigger the DMA channel. 1163 */ 1164 if (!xlnx_dpdma_start_operation(s->dpdma, 3, false)) { 1165 /* 1166 * An error occurred don't do anything with the data.. 1167 * Trigger an underflow interrupt. 1168 */ 1169 s->core_registers[DP_INT_STATUS] |= (1 << 21); 1170 xlnx_dp_update_irq(s); 1171 return; 1172 } 1173 1174 if (xlnx_dp_global_alpha_enabled(s)) { 1175 if (!xlnx_dpdma_start_operation(s->dpdma, 0, false)) { 1176 s->core_registers[DP_INT_STATUS] |= (1 << 21); 1177 xlnx_dp_update_irq(s); 1178 return; 1179 } 1180 xlnx_dp_blend_surface(s); 1181 } 1182 1183 /* 1184 * XXX: We might want to update only what changed. 1185 */ 1186 dpy_gfx_update(s->console, 0, 0, surface_width(s->g_plane.surface), 1187 surface_height(s->g_plane.surface)); 1188 } 1189 1190 static const GraphicHwOps xlnx_dp_gfx_ops = { 1191 .gfx_update = xlnx_dp_update_display, 1192 }; 1193 1194 static void xlnx_dp_init(Object *obj) 1195 { 1196 SysBusDevice *sbd = SYS_BUS_DEVICE(obj); 1197 XlnxDPState *s = XLNX_DP(obj); 1198 1199 memory_region_init(&s->container, obj, TYPE_XLNX_DP, 0xC050); 1200 1201 memory_region_init_io(&s->core_iomem, obj, &dp_ops, s, TYPE_XLNX_DP 1202 ".core", 0x3AF); 1203 memory_region_add_subregion(&s->container, 0x0000, &s->core_iomem); 1204 1205 memory_region_init_io(&s->vblend_iomem, obj, &vblend_ops, s, TYPE_XLNX_DP 1206 ".v_blend", 0x1DF); 1207 memory_region_add_subregion(&s->container, 0xA000, &s->vblend_iomem); 1208 1209 memory_region_init_io(&s->avbufm_iomem, obj, &avbufm_ops, s, TYPE_XLNX_DP 1210 ".av_buffer_manager", 0x238); 1211 memory_region_add_subregion(&s->container, 0xB000, &s->avbufm_iomem); 1212 1213 memory_region_init_io(&s->audio_iomem, obj, &audio_ops, s, TYPE_XLNX_DP 1214 ".audio", sizeof(s->audio_registers)); 1215 memory_region_add_subregion(&s->container, 0xC000, &s->audio_iomem); 1216 1217 sysbus_init_mmio(sbd, &s->container); 1218 sysbus_init_irq(sbd, &s->irq); 1219 1220 object_property_add_link(obj, "dpdma", TYPE_XLNX_DPDMA, 1221 (Object **) &s->dpdma, 1222 xlnx_dp_set_dpdma, 1223 OBJ_PROP_LINK_UNREF_ON_RELEASE, 1224 &error_abort); 1225 1226 /* 1227 * Initialize AUX Bus. 1228 */ 1229 s->aux_bus = aux_init_bus(DEVICE(obj), "aux"); 1230 1231 /* 1232 * Initialize DPCD and EDID.. 1233 */ 1234 s->dpcd = DPCD(aux_create_slave(s->aux_bus, "dpcd", 0x00000)); 1235 s->edid = I2CDDC(qdev_create(BUS(aux_get_i2c_bus(s->aux_bus)), "i2c-ddc")); 1236 i2c_set_slave_address(I2C_SLAVE(s->edid), 0x50); 1237 1238 fifo8_create(&s->rx_fifo, 16); 1239 fifo8_create(&s->tx_fifo, 16); 1240 } 1241 1242 static void xlnx_dp_realize(DeviceState *dev, Error **errp) 1243 { 1244 XlnxDPState *s = XLNX_DP(dev); 1245 DisplaySurface *surface; 1246 struct audsettings as; 1247 1248 s->console = graphic_console_init(dev, 0, &xlnx_dp_gfx_ops, s); 1249 surface = qemu_console_surface(s->console); 1250 xlnx_dpdma_set_host_data_location(s->dpdma, DP_GRAPHIC_DMA_CHANNEL, 1251 surface_data(surface)); 1252 1253 as.freq = 44100; 1254 as.nchannels = 2; 1255 as.fmt = AUD_FMT_S16; 1256 as.endianness = 0; 1257 1258 AUD_register_card("xlnx_dp.audio", &s->aud_card); 1259 1260 s->amixer_output_stream = AUD_open_out(&s->aud_card, 1261 s->amixer_output_stream, 1262 "xlnx_dp.audio.out", 1263 s, 1264 xlnx_dp_audio_callback, 1265 &as); 1266 AUD_set_volume_out(s->amixer_output_stream, 0, 255, 255); 1267 xlnx_dp_audio_activate(s); 1268 } 1269 1270 static void xlnx_dp_reset(DeviceState *dev) 1271 { 1272 XlnxDPState *s = XLNX_DP(dev); 1273 1274 memset(s->core_registers, 0, sizeof(s->core_registers)); 1275 s->core_registers[DP_VERSION_REGISTER] = 0x04010000; 1276 s->core_registers[DP_CORE_ID] = 0x01020000; 1277 s->core_registers[DP_REPLY_STATUS] = 0x00000010; 1278 s->core_registers[DP_MSA_TRANSFER_UNIT_SIZE] = 0x00000040; 1279 s->core_registers[DP_INIT_WAIT] = 0x00000020; 1280 s->core_registers[DP_PHY_RESET] = 0x00010003; 1281 s->core_registers[DP_INT_MASK] = 0xFFFFF03F; 1282 s->core_registers[DP_PHY_STATUS] = 0x00000043; 1283 s->core_registers[DP_INTERRUPT_SIGNAL_STATE] = 0x00000001; 1284 1285 s->vblend_registers[V_BLEND_RGB2YCBCR_COEFF(0)] = 0x00001000; 1286 s->vblend_registers[V_BLEND_RGB2YCBCR_COEFF(4)] = 0x00001000; 1287 s->vblend_registers[V_BLEND_RGB2YCBCR_COEFF(8)] = 0x00001000; 1288 s->vblend_registers[V_BLEND_IN1CSC_COEFF(0)] = 0x00001000; 1289 s->vblend_registers[V_BLEND_IN1CSC_COEFF(4)] = 0x00001000; 1290 s->vblend_registers[V_BLEND_IN1CSC_COEFF(8)] = 0x00001000; 1291 s->vblend_registers[V_BLEND_IN2CSC_COEFF(0)] = 0x00001000; 1292 s->vblend_registers[V_BLEND_IN2CSC_COEFF(4)] = 0x00001000; 1293 s->vblend_registers[V_BLEND_IN2CSC_COEFF(8)] = 0x00001000; 1294 1295 s->avbufm_registers[AV_BUF_NON_LIVE_LATENCY] = 0x00000180; 1296 s->avbufm_registers[AV_BUF_OUTPUT_AUDIO_VIDEO_SELECT] = 0x00000008; 1297 s->avbufm_registers[AV_BUF_DITHER_CONFIG_MAX] = 0x00000FFF; 1298 s->avbufm_registers[AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(0)] = 0x00010101; 1299 s->avbufm_registers[AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(1)] = 0x00010101; 1300 s->avbufm_registers[AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(2)] = 0x00010101; 1301 s->avbufm_registers[AV_BUF_VIDEO_COMP_SCALE_FACTOR(0)] = 0x00010101; 1302 s->avbufm_registers[AV_BUF_VIDEO_COMP_SCALE_FACTOR(1)] = 0x00010101; 1303 s->avbufm_registers[AV_BUF_VIDEO_COMP_SCALE_FACTOR(2)] = 0x00010101; 1304 s->avbufm_registers[AV_BUF_LIVE_VIDEO_COMP_SF(0)] = 0x00010101; 1305 s->avbufm_registers[AV_BUF_LIVE_VIDEO_COMP_SF(1)] = 0x00010101; 1306 s->avbufm_registers[AV_BUF_LIVE_VIDEO_COMP_SF(2)] = 0x00010101; 1307 s->avbufm_registers[AV_BUF_LIVE_GFX_COMP_SF(0)] = 0x00010101; 1308 s->avbufm_registers[AV_BUF_LIVE_GFX_COMP_SF(1)] = 0x00010101; 1309 s->avbufm_registers[AV_BUF_LIVE_GFX_COMP_SF(2)] = 0x00010101; 1310 1311 memset(s->audio_registers, 0, sizeof(s->audio_registers)); 1312 s->byte_left = 0; 1313 1314 xlnx_dp_aux_clear_rx_fifo(s); 1315 xlnx_dp_change_graphic_fmt(s); 1316 xlnx_dp_update_irq(s); 1317 } 1318 1319 static void xlnx_dp_class_init(ObjectClass *oc, void *data) 1320 { 1321 DeviceClass *dc = DEVICE_CLASS(oc); 1322 1323 dc->realize = xlnx_dp_realize; 1324 dc->vmsd = &vmstate_dp; 1325 dc->reset = xlnx_dp_reset; 1326 } 1327 1328 static const TypeInfo xlnx_dp_info = { 1329 .name = TYPE_XLNX_DP, 1330 .parent = TYPE_SYS_BUS_DEVICE, 1331 .instance_size = sizeof(XlnxDPState), 1332 .instance_init = xlnx_dp_init, 1333 .class_init = xlnx_dp_class_init, 1334 }; 1335 1336 static void xlnx_dp_register_types(void) 1337 { 1338 type_register_static(&xlnx_dp_info); 1339 } 1340 1341 type_init(xlnx_dp_register_types) 1342