1 /* 2 * QEMU SM501 Device 3 * 4 * Copyright (c) 2008 Shin-ichiro KAWASAKI 5 * Copyright (c) 2016-2020 BALATON Zoltan 6 * 7 * Permission is hereby granted, free of charge, to any person obtaining a copy 8 * of this software and associated documentation files (the "Software"), to deal 9 * in the Software without restriction, including without limitation the rights 10 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 11 * copies of the Software, and to permit persons to whom the Software is 12 * furnished to do so, subject to the following conditions: 13 * 14 * The above copyright notice and this permission notice shall be included in 15 * all copies or substantial portions of the Software. 16 * 17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 20 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 21 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 22 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 23 * THE SOFTWARE. 24 */ 25 26 #include "qemu/osdep.h" 27 #include "qemu/units.h" 28 #include "qapi/error.h" 29 #include "qemu/log.h" 30 #include "qemu/module.h" 31 #include "hw/usb/hcd-ohci.h" 32 #include "hw/char/serial.h" 33 #include "ui/console.h" 34 #include "hw/sysbus.h" 35 #include "migration/vmstate.h" 36 #include "hw/pci/pci_device.h" 37 #include "hw/qdev-properties.h" 38 #include "hw/i2c/i2c.h" 39 #include "hw/display/i2c-ddc.h" 40 #include "qemu/range.h" 41 #include "ui/pixel_ops.h" 42 #include "qemu/bswap.h" 43 #include "trace.h" 44 #include "qom/object.h" 45 46 #define MMIO_BASE_OFFSET 0x3e00000 47 #define MMIO_SIZE 0x200000 48 #define DC_PALETTE_ENTRIES (0x400 * 3) 49 50 /* SM501 register definitions taken from "linux/include/linux/sm501-regs.h" */ 51 52 /* System Configuration area */ 53 /* System config base */ 54 #define SM501_SYS_CONFIG 0x000000 55 56 /* config 1 */ 57 #define SM501_SYSTEM_CONTROL 0x000000 58 59 #define SM501_SYSCTRL_PANEL_TRISTATE (1 << 0) 60 #define SM501_SYSCTRL_MEM_TRISTATE (1 << 1) 61 #define SM501_SYSCTRL_CRT_TRISTATE (1 << 2) 62 63 #define SM501_SYSCTRL_PCI_SLAVE_BURST_MASK (3 << 4) 64 #define SM501_SYSCTRL_PCI_SLAVE_BURST_1 (0 << 4) 65 #define SM501_SYSCTRL_PCI_SLAVE_BURST_2 (1 << 4) 66 #define SM501_SYSCTRL_PCI_SLAVE_BURST_4 (2 << 4) 67 #define SM501_SYSCTRL_PCI_SLAVE_BURST_8 (3 << 4) 68 69 #define SM501_SYSCTRL_PCI_CLOCK_RUN_EN (1 << 6) 70 #define SM501_SYSCTRL_PCI_RETRY_DISABLE (1 << 7) 71 #define SM501_SYSCTRL_PCI_SUBSYS_LOCK (1 << 11) 72 #define SM501_SYSCTRL_PCI_BURST_READ_EN (1 << 15) 73 74 /* miscellaneous control */ 75 76 #define SM501_MISC_CONTROL 0x000004 77 78 #define SM501_MISC_BUS_SH 0x0 79 #define SM501_MISC_BUS_PCI 0x1 80 #define SM501_MISC_BUS_XSCALE 0x2 81 #define SM501_MISC_BUS_NEC 0x6 82 #define SM501_MISC_BUS_MASK 0x7 83 84 #define SM501_MISC_VR_62MB (1 << 3) 85 #define SM501_MISC_CDR_RESET (1 << 7) 86 #define SM501_MISC_USB_LB (1 << 8) 87 #define SM501_MISC_USB_SLAVE (1 << 9) 88 #define SM501_MISC_BL_1 (1 << 10) 89 #define SM501_MISC_MC (1 << 11) 90 #define SM501_MISC_DAC_POWER (1 << 12) 91 #define SM501_MISC_IRQ_INVERT (1 << 16) 92 #define SM501_MISC_SH (1 << 17) 93 94 #define SM501_MISC_HOLD_EMPTY (0 << 18) 95 #define SM501_MISC_HOLD_8 (1 << 18) 96 #define SM501_MISC_HOLD_16 (2 << 18) 97 #define SM501_MISC_HOLD_24 (3 << 18) 98 #define SM501_MISC_HOLD_32 (4 << 18) 99 #define SM501_MISC_HOLD_MASK (7 << 18) 100 101 #define SM501_MISC_FREQ_12 (1 << 24) 102 #define SM501_MISC_PNL_24BIT (1 << 25) 103 #define SM501_MISC_8051_LE (1 << 26) 104 105 106 107 #define SM501_GPIO31_0_CONTROL 0x000008 108 #define SM501_GPIO63_32_CONTROL 0x00000C 109 #define SM501_DRAM_CONTROL 0x000010 110 111 /* command list */ 112 #define SM501_ARBTRTN_CONTROL 0x000014 113 114 /* command list */ 115 #define SM501_COMMAND_LIST_STATUS 0x000024 116 117 /* interrupt debug */ 118 #define SM501_RAW_IRQ_STATUS 0x000028 119 #define SM501_RAW_IRQ_CLEAR 0x000028 120 #define SM501_IRQ_STATUS 0x00002C 121 #define SM501_IRQ_MASK 0x000030 122 #define SM501_DEBUG_CONTROL 0x000034 123 124 /* power management */ 125 #define SM501_POWERMODE_P2X_SRC (1 << 29) 126 #define SM501_POWERMODE_V2X_SRC (1 << 20) 127 #define SM501_POWERMODE_M_SRC (1 << 12) 128 #define SM501_POWERMODE_M1_SRC (1 << 4) 129 130 #define SM501_CURRENT_GATE 0x000038 131 #define SM501_CURRENT_CLOCK 0x00003C 132 #define SM501_POWER_MODE_0_GATE 0x000040 133 #define SM501_POWER_MODE_0_CLOCK 0x000044 134 #define SM501_POWER_MODE_1_GATE 0x000048 135 #define SM501_POWER_MODE_1_CLOCK 0x00004C 136 #define SM501_SLEEP_MODE_GATE 0x000050 137 #define SM501_POWER_MODE_CONTROL 0x000054 138 139 /* power gates for units within the 501 */ 140 #define SM501_GATE_HOST 0 141 #define SM501_GATE_MEMORY 1 142 #define SM501_GATE_DISPLAY 2 143 #define SM501_GATE_2D_ENGINE 3 144 #define SM501_GATE_CSC 4 145 #define SM501_GATE_ZVPORT 5 146 #define SM501_GATE_GPIO 6 147 #define SM501_GATE_UART0 7 148 #define SM501_GATE_UART1 8 149 #define SM501_GATE_SSP 10 150 #define SM501_GATE_USB_HOST 11 151 #define SM501_GATE_USB_GADGET 12 152 #define SM501_GATE_UCONTROLLER 17 153 #define SM501_GATE_AC97 18 154 155 /* panel clock */ 156 #define SM501_CLOCK_P2XCLK 24 157 /* crt clock */ 158 #define SM501_CLOCK_V2XCLK 16 159 /* main clock */ 160 #define SM501_CLOCK_MCLK 8 161 /* SDRAM controller clock */ 162 #define SM501_CLOCK_M1XCLK 0 163 164 /* config 2 */ 165 #define SM501_PCI_MASTER_BASE 0x000058 166 #define SM501_ENDIAN_CONTROL 0x00005C 167 #define SM501_DEVICEID 0x000060 168 /* 0x050100A0 */ 169 170 #define SM501_DEVICEID_SM501 0x05010000 171 #define SM501_DEVICEID_IDMASK 0xffff0000 172 #define SM501_DEVICEID_REVMASK 0x000000ff 173 174 #define SM501_PLLCLOCK_COUNT 0x000064 175 #define SM501_MISC_TIMING 0x000068 176 #define SM501_CURRENT_SDRAM_CLOCK 0x00006C 177 178 #define SM501_PROGRAMMABLE_PLL_CONTROL 0x000074 179 180 /* GPIO base */ 181 #define SM501_GPIO 0x010000 182 #define SM501_GPIO_DATA_LOW 0x00 183 #define SM501_GPIO_DATA_HIGH 0x04 184 #define SM501_GPIO_DDR_LOW 0x08 185 #define SM501_GPIO_DDR_HIGH 0x0C 186 #define SM501_GPIO_IRQ_SETUP 0x10 187 #define SM501_GPIO_IRQ_STATUS 0x14 188 #define SM501_GPIO_IRQ_RESET 0x14 189 190 /* I2C controller base */ 191 #define SM501_I2C 0x010040 192 #define SM501_I2C_BYTE_COUNT 0x00 193 #define SM501_I2C_CONTROL 0x01 194 #define SM501_I2C_STATUS 0x02 195 #define SM501_I2C_RESET 0x02 196 #define SM501_I2C_SLAVE_ADDRESS 0x03 197 #define SM501_I2C_DATA 0x04 198 199 #define SM501_I2C_CONTROL_START (1 << 2) 200 #define SM501_I2C_CONTROL_ENABLE (1 << 0) 201 202 #define SM501_I2C_STATUS_COMPLETE (1 << 3) 203 #define SM501_I2C_STATUS_ERROR (1 << 2) 204 205 #define SM501_I2C_RESET_ERROR (1 << 2) 206 207 /* SSP base */ 208 #define SM501_SSP 0x020000 209 210 /* Uart 0 base */ 211 #define SM501_UART0 0x030000 212 213 /* Uart 1 base */ 214 #define SM501_UART1 0x030020 215 216 /* USB host port base */ 217 #define SM501_USB_HOST 0x040000 218 219 /* USB slave/gadget base */ 220 #define SM501_USB_GADGET 0x060000 221 222 /* USB slave/gadget data port base */ 223 #define SM501_USB_GADGET_DATA 0x070000 224 225 /* Display controller/video engine base */ 226 #define SM501_DC 0x080000 227 228 /* common defines for the SM501 address registers */ 229 #define SM501_ADDR_FLIP (1 << 31) 230 #define SM501_ADDR_EXT (1 << 27) 231 #define SM501_ADDR_CS1 (1 << 26) 232 #define SM501_ADDR_MASK (0x3f << 26) 233 234 #define SM501_FIFO_MASK (0x3 << 16) 235 #define SM501_FIFO_1 (0x0 << 16) 236 #define SM501_FIFO_3 (0x1 << 16) 237 #define SM501_FIFO_7 (0x2 << 16) 238 #define SM501_FIFO_11 (0x3 << 16) 239 240 /* common registers for panel and the crt */ 241 #define SM501_OFF_DC_H_TOT 0x000 242 #define SM501_OFF_DC_V_TOT 0x008 243 #define SM501_OFF_DC_H_SYNC 0x004 244 #define SM501_OFF_DC_V_SYNC 0x00C 245 246 #define SM501_DC_PANEL_CONTROL 0x000 247 248 #define SM501_DC_PANEL_CONTROL_FPEN (1 << 27) 249 #define SM501_DC_PANEL_CONTROL_BIAS (1 << 26) 250 #define SM501_DC_PANEL_CONTROL_DATA (1 << 25) 251 #define SM501_DC_PANEL_CONTROL_VDD (1 << 24) 252 #define SM501_DC_PANEL_CONTROL_DP (1 << 23) 253 254 #define SM501_DC_PANEL_CONTROL_TFT_888 (0 << 21) 255 #define SM501_DC_PANEL_CONTROL_TFT_333 (1 << 21) 256 #define SM501_DC_PANEL_CONTROL_TFT_444 (2 << 21) 257 258 #define SM501_DC_PANEL_CONTROL_DE (1 << 20) 259 260 #define SM501_DC_PANEL_CONTROL_LCD_TFT (0 << 18) 261 #define SM501_DC_PANEL_CONTROL_LCD_STN8 (1 << 18) 262 #define SM501_DC_PANEL_CONTROL_LCD_STN12 (2 << 18) 263 264 #define SM501_DC_PANEL_CONTROL_CP (1 << 14) 265 #define SM501_DC_PANEL_CONTROL_VSP (1 << 13) 266 #define SM501_DC_PANEL_CONTROL_HSP (1 << 12) 267 #define SM501_DC_PANEL_CONTROL_CK (1 << 9) 268 #define SM501_DC_PANEL_CONTROL_TE (1 << 8) 269 #define SM501_DC_PANEL_CONTROL_VPD (1 << 7) 270 #define SM501_DC_PANEL_CONTROL_VP (1 << 6) 271 #define SM501_DC_PANEL_CONTROL_HPD (1 << 5) 272 #define SM501_DC_PANEL_CONTROL_HP (1 << 4) 273 #define SM501_DC_PANEL_CONTROL_GAMMA (1 << 3) 274 #define SM501_DC_PANEL_CONTROL_EN (1 << 2) 275 276 #define SM501_DC_PANEL_CONTROL_8BPP (0 << 0) 277 #define SM501_DC_PANEL_CONTROL_16BPP (1 << 0) 278 #define SM501_DC_PANEL_CONTROL_32BPP (2 << 0) 279 280 281 #define SM501_DC_PANEL_PANNING_CONTROL 0x004 282 #define SM501_DC_PANEL_COLOR_KEY 0x008 283 #define SM501_DC_PANEL_FB_ADDR 0x00C 284 #define SM501_DC_PANEL_FB_OFFSET 0x010 285 #define SM501_DC_PANEL_FB_WIDTH 0x014 286 #define SM501_DC_PANEL_FB_HEIGHT 0x018 287 #define SM501_DC_PANEL_TL_LOC 0x01C 288 #define SM501_DC_PANEL_BR_LOC 0x020 289 #define SM501_DC_PANEL_H_TOT 0x024 290 #define SM501_DC_PANEL_H_SYNC 0x028 291 #define SM501_DC_PANEL_V_TOT 0x02C 292 #define SM501_DC_PANEL_V_SYNC 0x030 293 #define SM501_DC_PANEL_CUR_LINE 0x034 294 295 #define SM501_DC_VIDEO_CONTROL 0x040 296 #define SM501_DC_VIDEO_FB0_ADDR 0x044 297 #define SM501_DC_VIDEO_FB_WIDTH 0x048 298 #define SM501_DC_VIDEO_FB0_LAST_ADDR 0x04C 299 #define SM501_DC_VIDEO_TL_LOC 0x050 300 #define SM501_DC_VIDEO_BR_LOC 0x054 301 #define SM501_DC_VIDEO_SCALE 0x058 302 #define SM501_DC_VIDEO_INIT_SCALE 0x05C 303 #define SM501_DC_VIDEO_YUV_CONSTANTS 0x060 304 #define SM501_DC_VIDEO_FB1_ADDR 0x064 305 #define SM501_DC_VIDEO_FB1_LAST_ADDR 0x068 306 307 #define SM501_DC_VIDEO_ALPHA_CONTROL 0x080 308 #define SM501_DC_VIDEO_ALPHA_FB_ADDR 0x084 309 #define SM501_DC_VIDEO_ALPHA_FB_OFFSET 0x088 310 #define SM501_DC_VIDEO_ALPHA_FB_LAST_ADDR 0x08C 311 #define SM501_DC_VIDEO_ALPHA_TL_LOC 0x090 312 #define SM501_DC_VIDEO_ALPHA_BR_LOC 0x094 313 #define SM501_DC_VIDEO_ALPHA_SCALE 0x098 314 #define SM501_DC_VIDEO_ALPHA_INIT_SCALE 0x09C 315 #define SM501_DC_VIDEO_ALPHA_CHROMA_KEY 0x0A0 316 #define SM501_DC_VIDEO_ALPHA_COLOR_LOOKUP 0x0A4 317 318 #define SM501_DC_PANEL_HWC_BASE 0x0F0 319 #define SM501_DC_PANEL_HWC_ADDR 0x0F0 320 #define SM501_DC_PANEL_HWC_LOC 0x0F4 321 #define SM501_DC_PANEL_HWC_COLOR_1_2 0x0F8 322 #define SM501_DC_PANEL_HWC_COLOR_3 0x0FC 323 324 #define SM501_HWC_EN (1 << 31) 325 326 #define SM501_OFF_HWC_ADDR 0x00 327 #define SM501_OFF_HWC_LOC 0x04 328 #define SM501_OFF_HWC_COLOR_1_2 0x08 329 #define SM501_OFF_HWC_COLOR_3 0x0C 330 331 #define SM501_DC_ALPHA_CONTROL 0x100 332 #define SM501_DC_ALPHA_FB_ADDR 0x104 333 #define SM501_DC_ALPHA_FB_OFFSET 0x108 334 #define SM501_DC_ALPHA_TL_LOC 0x10C 335 #define SM501_DC_ALPHA_BR_LOC 0x110 336 #define SM501_DC_ALPHA_CHROMA_KEY 0x114 337 #define SM501_DC_ALPHA_COLOR_LOOKUP 0x118 338 339 #define SM501_DC_CRT_CONTROL 0x200 340 341 #define SM501_DC_CRT_CONTROL_TVP (1 << 15) 342 #define SM501_DC_CRT_CONTROL_CP (1 << 14) 343 #define SM501_DC_CRT_CONTROL_VSP (1 << 13) 344 #define SM501_DC_CRT_CONTROL_HSP (1 << 12) 345 #define SM501_DC_CRT_CONTROL_VS (1 << 11) 346 #define SM501_DC_CRT_CONTROL_BLANK (1 << 10) 347 #define SM501_DC_CRT_CONTROL_SEL (1 << 9) 348 #define SM501_DC_CRT_CONTROL_TE (1 << 8) 349 #define SM501_DC_CRT_CONTROL_PIXEL_MASK (0xF << 4) 350 #define SM501_DC_CRT_CONTROL_GAMMA (1 << 3) 351 #define SM501_DC_CRT_CONTROL_ENABLE (1 << 2) 352 353 #define SM501_DC_CRT_CONTROL_8BPP (0 << 0) 354 #define SM501_DC_CRT_CONTROL_16BPP (1 << 0) 355 #define SM501_DC_CRT_CONTROL_32BPP (2 << 0) 356 357 #define SM501_DC_CRT_FB_ADDR 0x204 358 #define SM501_DC_CRT_FB_OFFSET 0x208 359 #define SM501_DC_CRT_H_TOT 0x20C 360 #define SM501_DC_CRT_H_SYNC 0x210 361 #define SM501_DC_CRT_V_TOT 0x214 362 #define SM501_DC_CRT_V_SYNC 0x218 363 #define SM501_DC_CRT_SIGNATURE_ANALYZER 0x21C 364 #define SM501_DC_CRT_CUR_LINE 0x220 365 #define SM501_DC_CRT_MONITOR_DETECT 0x224 366 367 #define SM501_DC_CRT_HWC_BASE 0x230 368 #define SM501_DC_CRT_HWC_ADDR 0x230 369 #define SM501_DC_CRT_HWC_LOC 0x234 370 #define SM501_DC_CRT_HWC_COLOR_1_2 0x238 371 #define SM501_DC_CRT_HWC_COLOR_3 0x23C 372 373 #define SM501_DC_PANEL_PALETTE 0x400 374 375 #define SM501_DC_VIDEO_PALETTE 0x800 376 377 #define SM501_DC_CRT_PALETTE 0xC00 378 379 /* Zoom Video port base */ 380 #define SM501_ZVPORT 0x090000 381 382 /* AC97/I2S base */ 383 #define SM501_AC97 0x0A0000 384 385 /* 8051 micro controller base */ 386 #define SM501_UCONTROLLER 0x0B0000 387 388 /* 8051 micro controller SRAM base */ 389 #define SM501_UCONTROLLER_SRAM 0x0C0000 390 391 /* DMA base */ 392 #define SM501_DMA 0x0D0000 393 394 /* 2d engine base */ 395 #define SM501_2D_ENGINE 0x100000 396 #define SM501_2D_SOURCE 0x00 397 #define SM501_2D_DESTINATION 0x04 398 #define SM501_2D_DIMENSION 0x08 399 #define SM501_2D_CONTROL 0x0C 400 #define SM501_2D_PITCH 0x10 401 #define SM501_2D_FOREGROUND 0x14 402 #define SM501_2D_BACKGROUND 0x18 403 #define SM501_2D_STRETCH 0x1C 404 #define SM501_2D_COLOR_COMPARE 0x20 405 #define SM501_2D_COLOR_COMPARE_MASK 0x24 406 #define SM501_2D_MASK 0x28 407 #define SM501_2D_CLIP_TL 0x2C 408 #define SM501_2D_CLIP_BR 0x30 409 #define SM501_2D_MONO_PATTERN_LOW 0x34 410 #define SM501_2D_MONO_PATTERN_HIGH 0x38 411 #define SM501_2D_WINDOW_WIDTH 0x3C 412 #define SM501_2D_SOURCE_BASE 0x40 413 #define SM501_2D_DESTINATION_BASE 0x44 414 #define SM501_2D_ALPHA 0x48 415 #define SM501_2D_WRAP 0x4C 416 #define SM501_2D_STATUS 0x50 417 418 #define SM501_CSC_Y_SOURCE_BASE 0xC8 419 #define SM501_CSC_CONSTANTS 0xCC 420 #define SM501_CSC_Y_SOURCE_X 0xD0 421 #define SM501_CSC_Y_SOURCE_Y 0xD4 422 #define SM501_CSC_U_SOURCE_BASE 0xD8 423 #define SM501_CSC_V_SOURCE_BASE 0xDC 424 #define SM501_CSC_SOURCE_DIMENSION 0xE0 425 #define SM501_CSC_SOURCE_PITCH 0xE4 426 #define SM501_CSC_DESTINATION 0xE8 427 #define SM501_CSC_DESTINATION_DIMENSION 0xEC 428 #define SM501_CSC_DESTINATION_PITCH 0xF0 429 #define SM501_CSC_SCALE_FACTOR 0xF4 430 #define SM501_CSC_DESTINATION_BASE 0xF8 431 #define SM501_CSC_CONTROL 0xFC 432 433 /* 2d engine data port base */ 434 #define SM501_2D_ENGINE_DATA 0x110000 435 436 /* end of register definitions */ 437 438 #define SM501_HWC_WIDTH 64 439 #define SM501_HWC_HEIGHT 64 440 441 /* SM501 local memory size taken from "linux/drivers/mfd/sm501.c" */ 442 static const uint32_t sm501_mem_local_size[] = { 443 [0] = 4 * MiB, 444 [1] = 8 * MiB, 445 [2] = 16 * MiB, 446 [3] = 32 * MiB, 447 [4] = 64 * MiB, 448 [5] = 2 * MiB, 449 }; 450 #define get_local_mem_size(s) sm501_mem_local_size[(s)->local_mem_size_index] 451 452 typedef struct SM501State { 453 /* graphic console status */ 454 QemuConsole *con; 455 456 /* status & internal resources */ 457 uint32_t local_mem_size_index; 458 uint8_t *local_mem; 459 MemoryRegion local_mem_region; 460 MemoryRegion mmio_region; 461 MemoryRegion system_config_region; 462 MemoryRegion i2c_region; 463 MemoryRegion disp_ctrl_region; 464 MemoryRegion twoD_engine_region; 465 uint32_t last_width; 466 uint32_t last_height; 467 bool do_full_update; /* perform a full update next time */ 468 I2CBus *i2c_bus; 469 470 /* mmio registers */ 471 uint32_t system_control; 472 uint32_t misc_control; 473 uint32_t gpio_31_0_control; 474 uint32_t gpio_63_32_control; 475 uint32_t dram_control; 476 uint32_t arbitration_control; 477 uint32_t irq_mask; 478 uint32_t misc_timing; 479 uint32_t power_mode_control; 480 481 uint8_t i2c_byte_count; 482 uint8_t i2c_status; 483 uint8_t i2c_addr; 484 uint8_t i2c_data[16]; 485 486 uint32_t uart0_ier; 487 uint32_t uart0_lcr; 488 uint32_t uart0_mcr; 489 uint32_t uart0_scr; 490 491 uint8_t dc_palette[DC_PALETTE_ENTRIES]; 492 493 uint32_t dc_panel_control; 494 uint32_t dc_panel_panning_control; 495 uint32_t dc_panel_fb_addr; 496 uint32_t dc_panel_fb_offset; 497 uint32_t dc_panel_fb_width; 498 uint32_t dc_panel_fb_height; 499 uint32_t dc_panel_tl_location; 500 uint32_t dc_panel_br_location; 501 uint32_t dc_panel_h_total; 502 uint32_t dc_panel_h_sync; 503 uint32_t dc_panel_v_total; 504 uint32_t dc_panel_v_sync; 505 506 uint32_t dc_panel_hwc_addr; 507 uint32_t dc_panel_hwc_location; 508 uint32_t dc_panel_hwc_color_1_2; 509 uint32_t dc_panel_hwc_color_3; 510 511 uint32_t dc_video_control; 512 513 uint32_t dc_crt_control; 514 uint32_t dc_crt_fb_addr; 515 uint32_t dc_crt_fb_offset; 516 uint32_t dc_crt_h_total; 517 uint32_t dc_crt_h_sync; 518 uint32_t dc_crt_v_total; 519 uint32_t dc_crt_v_sync; 520 521 uint32_t dc_crt_hwc_addr; 522 uint32_t dc_crt_hwc_location; 523 uint32_t dc_crt_hwc_color_1_2; 524 uint32_t dc_crt_hwc_color_3; 525 526 uint32_t twoD_source; 527 uint32_t twoD_destination; 528 uint32_t twoD_dimension; 529 uint32_t twoD_control; 530 uint32_t twoD_pitch; 531 uint32_t twoD_foreground; 532 uint32_t twoD_background; 533 uint32_t twoD_stretch; 534 uint32_t twoD_color_compare; 535 uint32_t twoD_color_compare_mask; 536 uint32_t twoD_mask; 537 uint32_t twoD_clip_tl; 538 uint32_t twoD_clip_br; 539 uint32_t twoD_mono_pattern_low; 540 uint32_t twoD_mono_pattern_high; 541 uint32_t twoD_window_width; 542 uint32_t twoD_source_base; 543 uint32_t twoD_destination_base; 544 uint32_t twoD_alpha; 545 uint32_t twoD_wrap; 546 } SM501State; 547 548 static uint32_t get_local_mem_size_index(uint32_t size) 549 { 550 uint32_t norm_size = 0; 551 int i, index = 0; 552 553 for (i = 0; i < ARRAY_SIZE(sm501_mem_local_size); i++) { 554 uint32_t new_size = sm501_mem_local_size[i]; 555 if (new_size >= size) { 556 if (norm_size == 0 || norm_size > new_size) { 557 norm_size = new_size; 558 index = i; 559 } 560 } 561 } 562 563 return index; 564 } 565 566 static ram_addr_t get_fb_addr(SM501State *s, int crt) 567 { 568 return (crt ? s->dc_crt_fb_addr : s->dc_panel_fb_addr) & 0x3FFFFF0; 569 } 570 571 static inline int get_width(SM501State *s, int crt) 572 { 573 int width = crt ? s->dc_crt_h_total : s->dc_panel_h_total; 574 return (width & 0x00000FFF) + 1; 575 } 576 577 static inline int get_height(SM501State *s, int crt) 578 { 579 int height = crt ? s->dc_crt_v_total : s->dc_panel_v_total; 580 return (height & 0x00000FFF) + 1; 581 } 582 583 static inline int get_bpp(SM501State *s, int crt) 584 { 585 int bpp = crt ? s->dc_crt_control : s->dc_panel_control; 586 return 1 << (bpp & 3); 587 } 588 589 /** 590 * Check the availability of hardware cursor. 591 * @param crt 0 for PANEL, 1 for CRT. 592 */ 593 static inline int is_hwc_enabled(SM501State *state, int crt) 594 { 595 uint32_t addr = crt ? state->dc_crt_hwc_addr : state->dc_panel_hwc_addr; 596 return addr & SM501_HWC_EN; 597 } 598 599 /** 600 * Get the address which holds cursor pattern data. 601 * @param crt 0 for PANEL, 1 for CRT. 602 */ 603 static inline uint8_t *get_hwc_address(SM501State *state, int crt) 604 { 605 uint32_t addr = crt ? state->dc_crt_hwc_addr : state->dc_panel_hwc_addr; 606 return state->local_mem + (addr & 0x03FFFFF0); 607 } 608 609 /** 610 * Get the cursor position in y coordinate. 611 * @param crt 0 for PANEL, 1 for CRT. 612 */ 613 static inline uint32_t get_hwc_y(SM501State *state, int crt) 614 { 615 uint32_t location = crt ? state->dc_crt_hwc_location 616 : state->dc_panel_hwc_location; 617 return (location & 0x07FF0000) >> 16; 618 } 619 620 /** 621 * Get the cursor position in x coordinate. 622 * @param crt 0 for PANEL, 1 for CRT. 623 */ 624 static inline uint32_t get_hwc_x(SM501State *state, int crt) 625 { 626 uint32_t location = crt ? state->dc_crt_hwc_location 627 : state->dc_panel_hwc_location; 628 return location & 0x000007FF; 629 } 630 631 /** 632 * Get the hardware cursor palette. 633 * @param crt 0 for PANEL, 1 for CRT. 634 * @param palette pointer to a [3 * 3] array to store color values in 635 */ 636 static inline void get_hwc_palette(SM501State *state, int crt, uint8_t *palette) 637 { 638 int i; 639 uint32_t color_reg; 640 uint16_t rgb565; 641 642 for (i = 0; i < 3; i++) { 643 if (i + 1 == 3) { 644 color_reg = crt ? state->dc_crt_hwc_color_3 645 : state->dc_panel_hwc_color_3; 646 } else { 647 color_reg = crt ? state->dc_crt_hwc_color_1_2 648 : state->dc_panel_hwc_color_1_2; 649 } 650 651 if (i + 1 == 2) { 652 rgb565 = (color_reg >> 16) & 0xFFFF; 653 } else { 654 rgb565 = color_reg & 0xFFFF; 655 } 656 palette[i * 3 + 0] = ((rgb565 >> 11) * 527 + 23) >> 6; /* r */ 657 palette[i * 3 + 1] = (((rgb565 >> 5) & 0x3f) * 259 + 33) >> 6; /* g */ 658 palette[i * 3 + 2] = ((rgb565 & 0x1f) * 527 + 23) >> 6; /* b */ 659 } 660 } 661 662 static inline void hwc_invalidate(SM501State *s, int crt) 663 { 664 int w = get_width(s, crt); 665 int h = get_height(s, crt); 666 int bpp = get_bpp(s, crt); 667 int start = get_hwc_y(s, crt); 668 int end = MIN(h, start + SM501_HWC_HEIGHT) + 1; 669 670 start *= w * bpp; 671 end *= w * bpp; 672 673 memory_region_set_dirty(&s->local_mem_region, 674 get_fb_addr(s, crt) + start, end - start); 675 } 676 677 static void sm501_2d_operation(SM501State *s) 678 { 679 int cmd = (s->twoD_control >> 16) & 0x1F; 680 int rtl = s->twoD_control & BIT(27); 681 int format = (s->twoD_stretch >> 20) & 3; 682 int bypp = 1 << format; /* bytes per pixel */ 683 int rop_mode = (s->twoD_control >> 15) & 1; /* 1 for rop2, else rop3 */ 684 /* 1 if rop2 source is the pattern, otherwise the source is the bitmap */ 685 int rop2_source_is_pattern = (s->twoD_control >> 14) & 1; 686 int rop = s->twoD_control & 0xFF; 687 unsigned int dst_x = (s->twoD_destination >> 16) & 0x01FFF; 688 unsigned int dst_y = s->twoD_destination & 0xFFFF; 689 unsigned int width = (s->twoD_dimension >> 16) & 0x1FFF; 690 unsigned int height = s->twoD_dimension & 0xFFFF; 691 uint32_t dst_base = s->twoD_destination_base & 0x03FFFFFF; 692 unsigned int dst_pitch = (s->twoD_pitch >> 16) & 0x1FFF; 693 int crt = (s->dc_crt_control & SM501_DC_CRT_CONTROL_SEL) ? 1 : 0; 694 int fb_len = get_width(s, crt) * get_height(s, crt) * get_bpp(s, crt); 695 bool overlap = false, fallback = false; 696 697 if ((s->twoD_stretch >> 16) & 0xF) { 698 qemu_log_mask(LOG_UNIMP, "sm501: only XY addressing is supported.\n"); 699 return; 700 } 701 702 if (s->twoD_source_base & BIT(27) || s->twoD_destination_base & BIT(27)) { 703 qemu_log_mask(LOG_UNIMP, "sm501: only local memory is supported.\n"); 704 return; 705 } 706 707 if (!dst_pitch) { 708 qemu_log_mask(LOG_GUEST_ERROR, "sm501: Zero dest pitch.\n"); 709 return; 710 } 711 712 if (!width || !height) { 713 qemu_log_mask(LOG_GUEST_ERROR, "sm501: Zero size 2D op.\n"); 714 return; 715 } 716 717 if (rtl) { 718 dst_x -= width - 1; 719 dst_y -= height - 1; 720 } 721 722 if (dst_base >= get_local_mem_size(s) || 723 dst_base + (dst_x + width + (dst_y + height) * dst_pitch) * bypp >= 724 get_local_mem_size(s)) { 725 qemu_log_mask(LOG_GUEST_ERROR, "sm501: 2D op dest is outside vram.\n"); 726 return; 727 } 728 729 switch (cmd) { 730 case 0: /* BitBlt */ 731 { 732 static uint32_t tmp_buf[16384]; 733 unsigned int src_x = (s->twoD_source >> 16) & 0x01FFF; 734 unsigned int src_y = s->twoD_source & 0xFFFF; 735 uint32_t src_base = s->twoD_source_base & 0x03FFFFFF; 736 unsigned int src_pitch = s->twoD_pitch & 0x1FFF; 737 738 if (!src_pitch) { 739 qemu_log_mask(LOG_GUEST_ERROR, "sm501: Zero src pitch.\n"); 740 return; 741 } 742 743 if (rtl) { 744 src_x -= width - 1; 745 src_y -= height - 1; 746 } 747 748 if (src_base >= get_local_mem_size(s) || 749 src_base + (src_x + width + (src_y + height) * src_pitch) * bypp >= 750 get_local_mem_size(s)) { 751 qemu_log_mask(LOG_GUEST_ERROR, 752 "sm501: 2D op src is outside vram.\n"); 753 return; 754 } 755 756 if ((rop_mode && rop == 0x5) || (!rop_mode && rop == 0x55)) { 757 /* DSTINVERT, is there a way to do this with pixman? */ 758 unsigned int x, y, i; 759 uint8_t *d = s->local_mem + dst_base; 760 761 for (y = 0; y < height; y++) { 762 i = (dst_x + (dst_y + y) * dst_pitch) * bypp; 763 for (x = 0; x < width; x++, i += bypp) { 764 stn_he_p(&d[i], bypp, ~ldn_he_p(&d[i], bypp)); 765 } 766 } 767 } else if (!rop_mode && rop == 0x99) { 768 /* DSxn, is there a way to do this with pixman? */ 769 unsigned int x, y, i, j; 770 uint8_t *sp = s->local_mem + src_base; 771 uint8_t *d = s->local_mem + dst_base; 772 773 for (y = 0; y < height; y++) { 774 i = (dst_x + (dst_y + y) * dst_pitch) * bypp; 775 j = (src_x + (src_y + y) * src_pitch) * bypp; 776 for (x = 0; x < width; x++, i += bypp, j += bypp) { 777 stn_he_p(&d[i], bypp, 778 ~(ldn_he_p(&sp[j], bypp) ^ ldn_he_p(&d[i], bypp))); 779 } 780 } 781 } else if (!rop_mode && rop == 0xee) { 782 /* SRCPAINT, is there a way to do this with pixman? */ 783 unsigned int x, y, i, j; 784 uint8_t *sp = s->local_mem + src_base; 785 uint8_t *d = s->local_mem + dst_base; 786 787 for (y = 0; y < height; y++) { 788 i = (dst_x + (dst_y + y) * dst_pitch) * bypp; 789 j = (src_x + (src_y + y) * src_pitch) * bypp; 790 for (x = 0; x < width; x++, i += bypp, j += bypp) { 791 stn_he_p(&d[i], bypp, 792 ldn_he_p(&sp[j], bypp) | ldn_he_p(&d[i], bypp)); 793 } 794 } 795 } else { 796 /* Do copy src for unimplemented ops, better than unpainted area */ 797 if ((rop_mode && (rop != 0xc || rop2_source_is_pattern)) || 798 (!rop_mode && rop != 0xcc)) { 799 qemu_log_mask(LOG_UNIMP, 800 "sm501: rop%d op %x%s not implemented\n", 801 (rop_mode ? 2 : 3), rop, 802 (rop2_source_is_pattern ? 803 " with pattern source" : "")); 804 } 805 /* Ignore no-op blits, some guests seem to do this */ 806 if (src_base == dst_base && src_pitch == dst_pitch && 807 src_x == dst_x && src_y == dst_y) { 808 break; 809 } 810 /* Some clients also do 1 pixel blits, avoid overhead for these */ 811 if (width == 1 && height == 1) { 812 unsigned int si = (src_x + src_y * src_pitch) * bypp; 813 unsigned int di = (dst_x + dst_y * dst_pitch) * bypp; 814 stn_he_p(&s->local_mem[dst_base + di], bypp, 815 ldn_he_p(&s->local_mem[src_base + si], bypp)); 816 break; 817 } 818 /* If reverse blit do simple check for overlaps */ 819 if (rtl && src_base == dst_base && src_pitch == dst_pitch) { 820 overlap = (src_x < dst_x + width && src_x + width > dst_x && 821 src_y < dst_y + height && src_y + height > dst_y); 822 } else if (rtl) { 823 unsigned int sb, se, db, de; 824 sb = src_base + (src_x + src_y * src_pitch) * bypp; 825 se = sb + (width + (height - 1) * src_pitch) * bypp; 826 db = dst_base + (dst_x + dst_y * dst_pitch) * bypp; 827 de = db + (width + (height - 1) * dst_pitch) * bypp; 828 overlap = (db < se && sb < de); 829 } 830 if (overlap) { 831 /* pixman can't do reverse blit: copy via temporary */ 832 int tmp_stride = DIV_ROUND_UP(width * bypp, sizeof(uint32_t)); 833 uint32_t *tmp = tmp_buf; 834 835 if (tmp_stride * sizeof(uint32_t) * height > sizeof(tmp_buf)) { 836 tmp = g_malloc(tmp_stride * sizeof(uint32_t) * height); 837 } 838 fallback = !pixman_blt((uint32_t *)&s->local_mem[src_base], 839 tmp, 840 src_pitch * bypp / sizeof(uint32_t), 841 tmp_stride, 842 8 * bypp, 8 * bypp, 843 src_x, src_y, 0, 0, width, height); 844 if (!fallback) { 845 fallback = !pixman_blt(tmp, 846 (uint32_t *)&s->local_mem[dst_base], 847 tmp_stride, 848 dst_pitch * bypp / sizeof(uint32_t), 849 8 * bypp, 8 * bypp, 850 0, 0, dst_x, dst_y, width, height); 851 } 852 if (tmp != tmp_buf) { 853 g_free(tmp); 854 } 855 } else { 856 fallback = !pixman_blt((uint32_t *)&s->local_mem[src_base], 857 (uint32_t *)&s->local_mem[dst_base], 858 src_pitch * bypp / sizeof(uint32_t), 859 dst_pitch * bypp / sizeof(uint32_t), 860 8 * bypp, 8 * bypp, src_x, src_y, 861 dst_x, dst_y, width, height); 862 } 863 if (fallback) { 864 uint8_t *sp = s->local_mem + src_base; 865 uint8_t *d = s->local_mem + dst_base; 866 unsigned int y, i, j; 867 for (y = 0; y < height; y++) { 868 if (overlap) { /* overlap also means rtl */ 869 i = (dst_y + height - 1 - y) * dst_pitch; 870 i = (dst_x + i) * bypp; 871 j = (src_y + height - 1 - y) * src_pitch; 872 j = (src_x + j) * bypp; 873 memmove(&d[i], &sp[j], width * bypp); 874 } else { 875 i = (dst_x + (dst_y + y) * dst_pitch) * bypp; 876 j = (src_x + (src_y + y) * src_pitch) * bypp; 877 memcpy(&d[i], &sp[j], width * bypp); 878 } 879 } 880 } 881 } 882 break; 883 } 884 case 1: /* Rectangle Fill */ 885 { 886 uint32_t color = s->twoD_foreground; 887 888 if (format == 2) { 889 color = cpu_to_le32(color); 890 } else if (format == 1) { 891 color = cpu_to_le16(color); 892 } 893 894 if ((width == 1 && height == 1) || 895 !pixman_fill((uint32_t *)&s->local_mem[dst_base], 896 dst_pitch * bypp / sizeof(uint32_t), 8 * bypp, 897 dst_x, dst_y, width, height, color)) { 898 /* fallback when pixman failed or we don't want to call it */ 899 uint8_t *d = s->local_mem + dst_base; 900 unsigned int x, y, i; 901 for (y = 0; y < height; y++, i += dst_pitch * bypp) { 902 i = (dst_x + (dst_y + y) * dst_pitch) * bypp; 903 for (x = 0; x < width; x++, i += bypp) { 904 stn_he_p(&d[i], bypp, color); 905 } 906 } 907 } 908 break; 909 } 910 default: 911 qemu_log_mask(LOG_UNIMP, "sm501: not implemented 2D operation: %d\n", 912 cmd); 913 return; 914 } 915 916 if (dst_base >= get_fb_addr(s, crt) && 917 dst_base <= get_fb_addr(s, crt) + fb_len) { 918 int dst_len = MIN(fb_len, ((dst_y + height - 1) * dst_pitch + 919 dst_x + width) * bypp); 920 if (dst_len) { 921 memory_region_set_dirty(&s->local_mem_region, dst_base, dst_len); 922 } 923 } 924 } 925 926 static uint64_t sm501_system_config_read(void *opaque, hwaddr addr, 927 unsigned size) 928 { 929 SM501State *s = opaque; 930 uint32_t ret = 0; 931 932 switch (addr) { 933 case SM501_SYSTEM_CONTROL: 934 ret = s->system_control; 935 break; 936 case SM501_MISC_CONTROL: 937 ret = s->misc_control; 938 break; 939 case SM501_GPIO31_0_CONTROL: 940 ret = s->gpio_31_0_control; 941 break; 942 case SM501_GPIO63_32_CONTROL: 943 ret = s->gpio_63_32_control; 944 break; 945 case SM501_DEVICEID: 946 ret = 0x050100A0; 947 break; 948 case SM501_DRAM_CONTROL: 949 ret = (s->dram_control & 0x07F107C0) | s->local_mem_size_index << 13; 950 break; 951 case SM501_ARBTRTN_CONTROL: 952 ret = s->arbitration_control; 953 break; 954 case SM501_COMMAND_LIST_STATUS: 955 ret = 0x00180002; /* FIFOs are empty, everything idle */ 956 break; 957 case SM501_IRQ_MASK: 958 ret = s->irq_mask; 959 break; 960 case SM501_MISC_TIMING: 961 /* TODO : simulate gate control */ 962 ret = s->misc_timing; 963 break; 964 case SM501_CURRENT_GATE: 965 /* TODO : simulate gate control */ 966 ret = 0x00021807; 967 break; 968 case SM501_CURRENT_CLOCK: 969 ret = 0x2A1A0A09; 970 break; 971 case SM501_POWER_MODE_CONTROL: 972 ret = s->power_mode_control; 973 break; 974 case SM501_ENDIAN_CONTROL: 975 ret = 0; /* Only default little endian mode is supported */ 976 break; 977 978 default: 979 qemu_log_mask(LOG_UNIMP, "sm501: not implemented system config" 980 "register read. addr=%" HWADDR_PRIx "\n", addr); 981 } 982 trace_sm501_system_config_read(addr, ret); 983 return ret; 984 } 985 986 static void sm501_system_config_write(void *opaque, hwaddr addr, 987 uint64_t value, unsigned size) 988 { 989 SM501State *s = opaque; 990 991 trace_sm501_system_config_write((uint32_t)addr, (uint32_t)value); 992 switch (addr) { 993 case SM501_SYSTEM_CONTROL: 994 s->system_control &= 0x10DB0000; 995 s->system_control |= value & 0xEF00B8F7; 996 break; 997 case SM501_MISC_CONTROL: 998 s->misc_control &= 0xEF; 999 s->misc_control |= value & 0xFF7FFF10; 1000 break; 1001 case SM501_GPIO31_0_CONTROL: 1002 s->gpio_31_0_control = value; 1003 break; 1004 case SM501_GPIO63_32_CONTROL: 1005 s->gpio_63_32_control = value & 0xFF80FFFF; 1006 break; 1007 case SM501_DRAM_CONTROL: 1008 s->local_mem_size_index = (value >> 13) & 0x7; 1009 /* TODO : check validity of size change */ 1010 s->dram_control &= 0x80000000; 1011 s->dram_control |= value & 0x7FFFFFC3; 1012 break; 1013 case SM501_ARBTRTN_CONTROL: 1014 s->arbitration_control = value & 0x37777777; 1015 break; 1016 case SM501_IRQ_MASK: 1017 s->irq_mask = value & 0xFFDF3F5F; 1018 break; 1019 case SM501_MISC_TIMING: 1020 s->misc_timing = value & 0xF31F1FFF; 1021 break; 1022 case SM501_POWER_MODE_0_GATE: 1023 case SM501_POWER_MODE_1_GATE: 1024 case SM501_POWER_MODE_0_CLOCK: 1025 case SM501_POWER_MODE_1_CLOCK: 1026 /* TODO : simulate gate & clock control */ 1027 break; 1028 case SM501_POWER_MODE_CONTROL: 1029 s->power_mode_control = value & 0x00000003; 1030 break; 1031 case SM501_ENDIAN_CONTROL: 1032 if (value & 0x00000001) { 1033 qemu_log_mask(LOG_UNIMP, "sm501: system config big endian mode not" 1034 " implemented.\n"); 1035 } 1036 break; 1037 1038 default: 1039 qemu_log_mask(LOG_UNIMP, "sm501: not implemented system config" 1040 "register write. addr=%" HWADDR_PRIx 1041 ", val=%" PRIx64 "\n", addr, value); 1042 } 1043 } 1044 1045 static const MemoryRegionOps sm501_system_config_ops = { 1046 .read = sm501_system_config_read, 1047 .write = sm501_system_config_write, 1048 .valid = { 1049 .min_access_size = 4, 1050 .max_access_size = 4, 1051 }, 1052 .endianness = DEVICE_LITTLE_ENDIAN, 1053 }; 1054 1055 static uint64_t sm501_i2c_read(void *opaque, hwaddr addr, unsigned size) 1056 { 1057 SM501State *s = opaque; 1058 uint8_t ret = 0; 1059 1060 switch (addr) { 1061 case SM501_I2C_BYTE_COUNT: 1062 ret = s->i2c_byte_count; 1063 break; 1064 case SM501_I2C_STATUS: 1065 ret = s->i2c_status; 1066 break; 1067 case SM501_I2C_SLAVE_ADDRESS: 1068 ret = s->i2c_addr; 1069 break; 1070 case SM501_I2C_DATA ... SM501_I2C_DATA + 15: 1071 ret = s->i2c_data[addr - SM501_I2C_DATA]; 1072 break; 1073 default: 1074 qemu_log_mask(LOG_UNIMP, "sm501 i2c : not implemented register read." 1075 " addr=0x%" HWADDR_PRIx "\n", addr); 1076 } 1077 trace_sm501_i2c_read((uint32_t)addr, ret); 1078 return ret; 1079 } 1080 1081 static void sm501_i2c_write(void *opaque, hwaddr addr, uint64_t value, 1082 unsigned size) 1083 { 1084 SM501State *s = opaque; 1085 1086 trace_sm501_i2c_write((uint32_t)addr, (uint32_t)value); 1087 switch (addr) { 1088 case SM501_I2C_BYTE_COUNT: 1089 s->i2c_byte_count = value & 0xf; 1090 break; 1091 case SM501_I2C_CONTROL: 1092 if (value & SM501_I2C_CONTROL_ENABLE) { 1093 if (value & SM501_I2C_CONTROL_START) { 1094 bool is_recv = s->i2c_addr & 1; 1095 int res = i2c_start_transfer(s->i2c_bus, 1096 s->i2c_addr >> 1, 1097 is_recv); 1098 if (res) { 1099 s->i2c_status |= SM501_I2C_STATUS_ERROR; 1100 } else { 1101 int i; 1102 for (i = 0; i <= s->i2c_byte_count; i++) { 1103 if (is_recv) { 1104 s->i2c_data[i] = i2c_recv(s->i2c_bus); 1105 } else if (i2c_send(s->i2c_bus, s->i2c_data[i]) < 0) { 1106 s->i2c_status |= SM501_I2C_STATUS_ERROR; 1107 return; 1108 } 1109 } 1110 if (i) { 1111 s->i2c_status = SM501_I2C_STATUS_COMPLETE; 1112 } 1113 } 1114 } else { 1115 i2c_end_transfer(s->i2c_bus); 1116 s->i2c_status &= ~SM501_I2C_STATUS_ERROR; 1117 } 1118 } 1119 break; 1120 case SM501_I2C_RESET: 1121 if ((value & SM501_I2C_RESET_ERROR) == 0) { 1122 s->i2c_status &= ~SM501_I2C_STATUS_ERROR; 1123 } 1124 break; 1125 case SM501_I2C_SLAVE_ADDRESS: 1126 s->i2c_addr = value & 0xff; 1127 break; 1128 case SM501_I2C_DATA ... SM501_I2C_DATA + 15: 1129 s->i2c_data[addr - SM501_I2C_DATA] = value & 0xff; 1130 break; 1131 default: 1132 qemu_log_mask(LOG_UNIMP, "sm501 i2c : not implemented register write. " 1133 "addr=0x%" HWADDR_PRIx " val=%" PRIx64 "\n", addr, value); 1134 } 1135 } 1136 1137 static const MemoryRegionOps sm501_i2c_ops = { 1138 .read = sm501_i2c_read, 1139 .write = sm501_i2c_write, 1140 .valid = { 1141 .min_access_size = 1, 1142 .max_access_size = 1, 1143 }, 1144 .impl = { 1145 .min_access_size = 1, 1146 .max_access_size = 1, 1147 }, 1148 .endianness = DEVICE_LITTLE_ENDIAN, 1149 }; 1150 1151 static uint32_t sm501_palette_read(void *opaque, hwaddr addr) 1152 { 1153 SM501State *s = opaque; 1154 1155 trace_sm501_palette_read((uint32_t)addr); 1156 1157 /* TODO : consider BYTE/WORD access */ 1158 /* TODO : consider endian */ 1159 1160 assert(range_covers_byte(0, 0x400 * 3, addr)); 1161 return *(uint32_t *)&s->dc_palette[addr]; 1162 } 1163 1164 static void sm501_palette_write(void *opaque, hwaddr addr, 1165 uint32_t value) 1166 { 1167 SM501State *s = opaque; 1168 1169 trace_sm501_palette_write((uint32_t)addr, value); 1170 1171 /* TODO : consider BYTE/WORD access */ 1172 /* TODO : consider endian */ 1173 1174 assert(range_covers_byte(0, 0x400 * 3, addr)); 1175 *(uint32_t *)&s->dc_palette[addr] = value; 1176 s->do_full_update = true; 1177 } 1178 1179 static uint64_t sm501_disp_ctrl_read(void *opaque, hwaddr addr, 1180 unsigned size) 1181 { 1182 SM501State *s = opaque; 1183 uint32_t ret = 0; 1184 1185 switch (addr) { 1186 1187 case SM501_DC_PANEL_CONTROL: 1188 ret = s->dc_panel_control; 1189 break; 1190 case SM501_DC_PANEL_PANNING_CONTROL: 1191 ret = s->dc_panel_panning_control; 1192 break; 1193 case SM501_DC_PANEL_COLOR_KEY: 1194 /* Not implemented yet */ 1195 break; 1196 case SM501_DC_PANEL_FB_ADDR: 1197 ret = s->dc_panel_fb_addr; 1198 break; 1199 case SM501_DC_PANEL_FB_OFFSET: 1200 ret = s->dc_panel_fb_offset; 1201 break; 1202 case SM501_DC_PANEL_FB_WIDTH: 1203 ret = s->dc_panel_fb_width; 1204 break; 1205 case SM501_DC_PANEL_FB_HEIGHT: 1206 ret = s->dc_panel_fb_height; 1207 break; 1208 case SM501_DC_PANEL_TL_LOC: 1209 ret = s->dc_panel_tl_location; 1210 break; 1211 case SM501_DC_PANEL_BR_LOC: 1212 ret = s->dc_panel_br_location; 1213 break; 1214 1215 case SM501_DC_PANEL_H_TOT: 1216 ret = s->dc_panel_h_total; 1217 break; 1218 case SM501_DC_PANEL_H_SYNC: 1219 ret = s->dc_panel_h_sync; 1220 break; 1221 case SM501_DC_PANEL_V_TOT: 1222 ret = s->dc_panel_v_total; 1223 break; 1224 case SM501_DC_PANEL_V_SYNC: 1225 ret = s->dc_panel_v_sync; 1226 break; 1227 1228 case SM501_DC_PANEL_HWC_ADDR: 1229 ret = s->dc_panel_hwc_addr; 1230 break; 1231 case SM501_DC_PANEL_HWC_LOC: 1232 ret = s->dc_panel_hwc_location; 1233 break; 1234 case SM501_DC_PANEL_HWC_COLOR_1_2: 1235 ret = s->dc_panel_hwc_color_1_2; 1236 break; 1237 case SM501_DC_PANEL_HWC_COLOR_3: 1238 ret = s->dc_panel_hwc_color_3; 1239 break; 1240 1241 case SM501_DC_VIDEO_CONTROL: 1242 ret = s->dc_video_control; 1243 break; 1244 1245 case SM501_DC_CRT_CONTROL: 1246 ret = s->dc_crt_control; 1247 break; 1248 case SM501_DC_CRT_FB_ADDR: 1249 ret = s->dc_crt_fb_addr; 1250 break; 1251 case SM501_DC_CRT_FB_OFFSET: 1252 ret = s->dc_crt_fb_offset; 1253 break; 1254 case SM501_DC_CRT_H_TOT: 1255 ret = s->dc_crt_h_total; 1256 break; 1257 case SM501_DC_CRT_H_SYNC: 1258 ret = s->dc_crt_h_sync; 1259 break; 1260 case SM501_DC_CRT_V_TOT: 1261 ret = s->dc_crt_v_total; 1262 break; 1263 case SM501_DC_CRT_V_SYNC: 1264 ret = s->dc_crt_v_sync; 1265 break; 1266 1267 case SM501_DC_CRT_HWC_ADDR: 1268 ret = s->dc_crt_hwc_addr; 1269 break; 1270 case SM501_DC_CRT_HWC_LOC: 1271 ret = s->dc_crt_hwc_location; 1272 break; 1273 case SM501_DC_CRT_HWC_COLOR_1_2: 1274 ret = s->dc_crt_hwc_color_1_2; 1275 break; 1276 case SM501_DC_CRT_HWC_COLOR_3: 1277 ret = s->dc_crt_hwc_color_3; 1278 break; 1279 1280 case SM501_DC_PANEL_PALETTE ... SM501_DC_PANEL_PALETTE + 0x400 * 3 - 4: 1281 ret = sm501_palette_read(opaque, addr - SM501_DC_PANEL_PALETTE); 1282 break; 1283 1284 default: 1285 qemu_log_mask(LOG_UNIMP, "sm501: not implemented disp ctrl register " 1286 "read. addr=%" HWADDR_PRIx "\n", addr); 1287 } 1288 trace_sm501_disp_ctrl_read((uint32_t)addr, ret); 1289 return ret; 1290 } 1291 1292 static void sm501_disp_ctrl_write(void *opaque, hwaddr addr, 1293 uint64_t value, unsigned size) 1294 { 1295 SM501State *s = opaque; 1296 1297 trace_sm501_disp_ctrl_write((uint32_t)addr, (uint32_t)value); 1298 switch (addr) { 1299 case SM501_DC_PANEL_CONTROL: 1300 s->dc_panel_control = value & 0x0FFF73FF; 1301 break; 1302 case SM501_DC_PANEL_PANNING_CONTROL: 1303 s->dc_panel_panning_control = value & 0xFF3FFF3F; 1304 break; 1305 case SM501_DC_PANEL_COLOR_KEY: 1306 /* Not implemented yet */ 1307 break; 1308 case SM501_DC_PANEL_FB_ADDR: 1309 s->dc_panel_fb_addr = value & 0x8FFFFFF0; 1310 if (value & 0x8000000) { 1311 qemu_log_mask(LOG_UNIMP, "Panel external memory not supported\n"); 1312 } 1313 s->do_full_update = true; 1314 break; 1315 case SM501_DC_PANEL_FB_OFFSET: 1316 s->dc_panel_fb_offset = value & 0x3FF03FF0; 1317 break; 1318 case SM501_DC_PANEL_FB_WIDTH: 1319 s->dc_panel_fb_width = value & 0x0FFF0FFF; 1320 break; 1321 case SM501_DC_PANEL_FB_HEIGHT: 1322 s->dc_panel_fb_height = value & 0x0FFF0FFF; 1323 break; 1324 case SM501_DC_PANEL_TL_LOC: 1325 s->dc_panel_tl_location = value & 0x07FF07FF; 1326 break; 1327 case SM501_DC_PANEL_BR_LOC: 1328 s->dc_panel_br_location = value & 0x07FF07FF; 1329 break; 1330 1331 case SM501_DC_PANEL_H_TOT: 1332 s->dc_panel_h_total = value & 0x0FFF0FFF; 1333 break; 1334 case SM501_DC_PANEL_H_SYNC: 1335 s->dc_panel_h_sync = value & 0x00FF0FFF; 1336 break; 1337 case SM501_DC_PANEL_V_TOT: 1338 s->dc_panel_v_total = value & 0x0FFF0FFF; 1339 break; 1340 case SM501_DC_PANEL_V_SYNC: 1341 s->dc_panel_v_sync = value & 0x003F0FFF; 1342 break; 1343 1344 case SM501_DC_PANEL_HWC_ADDR: 1345 value &= 0x8FFFFFF0; 1346 if (value != s->dc_panel_hwc_addr) { 1347 hwc_invalidate(s, 0); 1348 s->dc_panel_hwc_addr = value; 1349 } 1350 break; 1351 case SM501_DC_PANEL_HWC_LOC: 1352 value &= 0x0FFF0FFF; 1353 if (value != s->dc_panel_hwc_location) { 1354 hwc_invalidate(s, 0); 1355 s->dc_panel_hwc_location = value; 1356 } 1357 break; 1358 case SM501_DC_PANEL_HWC_COLOR_1_2: 1359 s->dc_panel_hwc_color_1_2 = value; 1360 break; 1361 case SM501_DC_PANEL_HWC_COLOR_3: 1362 s->dc_panel_hwc_color_3 = value & 0x0000FFFF; 1363 break; 1364 1365 case SM501_DC_VIDEO_CONTROL: 1366 s->dc_video_control = value & 0x00037FFF; 1367 break; 1368 1369 case SM501_DC_CRT_CONTROL: 1370 s->dc_crt_control = value & 0x0003FFFF; 1371 break; 1372 case SM501_DC_CRT_FB_ADDR: 1373 s->dc_crt_fb_addr = value & 0x8FFFFFF0; 1374 if (value & 0x8000000) { 1375 qemu_log_mask(LOG_UNIMP, "CRT external memory not supported\n"); 1376 } 1377 s->do_full_update = true; 1378 break; 1379 case SM501_DC_CRT_FB_OFFSET: 1380 s->dc_crt_fb_offset = value & 0x3FF03FF0; 1381 break; 1382 case SM501_DC_CRT_H_TOT: 1383 s->dc_crt_h_total = value & 0x0FFF0FFF; 1384 break; 1385 case SM501_DC_CRT_H_SYNC: 1386 s->dc_crt_h_sync = value & 0x00FF0FFF; 1387 break; 1388 case SM501_DC_CRT_V_TOT: 1389 s->dc_crt_v_total = value & 0x0FFF0FFF; 1390 break; 1391 case SM501_DC_CRT_V_SYNC: 1392 s->dc_crt_v_sync = value & 0x003F0FFF; 1393 break; 1394 1395 case SM501_DC_CRT_HWC_ADDR: 1396 value &= 0x8FFFFFF0; 1397 if (value != s->dc_crt_hwc_addr) { 1398 hwc_invalidate(s, 1); 1399 s->dc_crt_hwc_addr = value; 1400 } 1401 break; 1402 case SM501_DC_CRT_HWC_LOC: 1403 value &= 0x0FFF0FFF; 1404 if (value != s->dc_crt_hwc_location) { 1405 hwc_invalidate(s, 1); 1406 s->dc_crt_hwc_location = value; 1407 } 1408 break; 1409 case SM501_DC_CRT_HWC_COLOR_1_2: 1410 s->dc_crt_hwc_color_1_2 = value; 1411 break; 1412 case SM501_DC_CRT_HWC_COLOR_3: 1413 s->dc_crt_hwc_color_3 = value & 0x0000FFFF; 1414 break; 1415 1416 case SM501_DC_PANEL_PALETTE ... SM501_DC_PANEL_PALETTE + 0x400 * 3 - 4: 1417 sm501_palette_write(opaque, addr - SM501_DC_PANEL_PALETTE, value); 1418 break; 1419 1420 default: 1421 qemu_log_mask(LOG_UNIMP, "sm501: not implemented disp ctrl register " 1422 "write. addr=%" HWADDR_PRIx 1423 ", val=%" PRIx64 "\n", addr, value); 1424 } 1425 } 1426 1427 static const MemoryRegionOps sm501_disp_ctrl_ops = { 1428 .read = sm501_disp_ctrl_read, 1429 .write = sm501_disp_ctrl_write, 1430 .valid = { 1431 .min_access_size = 4, 1432 .max_access_size = 4, 1433 }, 1434 .endianness = DEVICE_LITTLE_ENDIAN, 1435 }; 1436 1437 static uint64_t sm501_2d_engine_read(void *opaque, hwaddr addr, 1438 unsigned size) 1439 { 1440 SM501State *s = opaque; 1441 uint32_t ret = 0; 1442 1443 switch (addr) { 1444 case SM501_2D_SOURCE: 1445 ret = s->twoD_source; 1446 break; 1447 case SM501_2D_DESTINATION: 1448 ret = s->twoD_destination; 1449 break; 1450 case SM501_2D_DIMENSION: 1451 ret = s->twoD_dimension; 1452 break; 1453 case SM501_2D_CONTROL: 1454 ret = s->twoD_control; 1455 break; 1456 case SM501_2D_PITCH: 1457 ret = s->twoD_pitch; 1458 break; 1459 case SM501_2D_FOREGROUND: 1460 ret = s->twoD_foreground; 1461 break; 1462 case SM501_2D_BACKGROUND: 1463 ret = s->twoD_background; 1464 break; 1465 case SM501_2D_STRETCH: 1466 ret = s->twoD_stretch; 1467 break; 1468 case SM501_2D_COLOR_COMPARE: 1469 ret = s->twoD_color_compare; 1470 break; 1471 case SM501_2D_COLOR_COMPARE_MASK: 1472 ret = s->twoD_color_compare_mask; 1473 break; 1474 case SM501_2D_MASK: 1475 ret = s->twoD_mask; 1476 break; 1477 case SM501_2D_CLIP_TL: 1478 ret = s->twoD_clip_tl; 1479 break; 1480 case SM501_2D_CLIP_BR: 1481 ret = s->twoD_clip_br; 1482 break; 1483 case SM501_2D_MONO_PATTERN_LOW: 1484 ret = s->twoD_mono_pattern_low; 1485 break; 1486 case SM501_2D_MONO_PATTERN_HIGH: 1487 ret = s->twoD_mono_pattern_high; 1488 break; 1489 case SM501_2D_WINDOW_WIDTH: 1490 ret = s->twoD_window_width; 1491 break; 1492 case SM501_2D_SOURCE_BASE: 1493 ret = s->twoD_source_base; 1494 break; 1495 case SM501_2D_DESTINATION_BASE: 1496 ret = s->twoD_destination_base; 1497 break; 1498 case SM501_2D_ALPHA: 1499 ret = s->twoD_alpha; 1500 break; 1501 case SM501_2D_WRAP: 1502 ret = s->twoD_wrap; 1503 break; 1504 case SM501_2D_STATUS: 1505 ret = 0; /* Should return interrupt status */ 1506 break; 1507 default: 1508 qemu_log_mask(LOG_UNIMP, "sm501: not implemented disp ctrl register " 1509 "read. addr=%" HWADDR_PRIx "\n", addr); 1510 } 1511 trace_sm501_2d_engine_read((uint32_t)addr, ret); 1512 return ret; 1513 } 1514 1515 static void sm501_2d_engine_write(void *opaque, hwaddr addr, 1516 uint64_t value, unsigned size) 1517 { 1518 SM501State *s = opaque; 1519 1520 trace_sm501_2d_engine_write((uint32_t)addr, (uint32_t)value); 1521 switch (addr) { 1522 case SM501_2D_SOURCE: 1523 s->twoD_source = value; 1524 break; 1525 case SM501_2D_DESTINATION: 1526 s->twoD_destination = value; 1527 break; 1528 case SM501_2D_DIMENSION: 1529 s->twoD_dimension = value; 1530 break; 1531 case SM501_2D_CONTROL: 1532 s->twoD_control = value; 1533 1534 /* do 2d operation if start flag is set. */ 1535 if (value & 0x80000000) { 1536 sm501_2d_operation(s); 1537 s->twoD_control &= ~0x80000000; /* start flag down */ 1538 } 1539 1540 break; 1541 case SM501_2D_PITCH: 1542 s->twoD_pitch = value; 1543 break; 1544 case SM501_2D_FOREGROUND: 1545 s->twoD_foreground = value; 1546 break; 1547 case SM501_2D_BACKGROUND: 1548 s->twoD_background = value; 1549 break; 1550 case SM501_2D_STRETCH: 1551 if (((value >> 20) & 3) == 3) { 1552 value &= ~BIT(20); 1553 } 1554 s->twoD_stretch = value; 1555 break; 1556 case SM501_2D_COLOR_COMPARE: 1557 s->twoD_color_compare = value; 1558 break; 1559 case SM501_2D_COLOR_COMPARE_MASK: 1560 s->twoD_color_compare_mask = value; 1561 break; 1562 case SM501_2D_MASK: 1563 s->twoD_mask = value; 1564 break; 1565 case SM501_2D_CLIP_TL: 1566 s->twoD_clip_tl = value; 1567 break; 1568 case SM501_2D_CLIP_BR: 1569 s->twoD_clip_br = value; 1570 break; 1571 case SM501_2D_MONO_PATTERN_LOW: 1572 s->twoD_mono_pattern_low = value; 1573 break; 1574 case SM501_2D_MONO_PATTERN_HIGH: 1575 s->twoD_mono_pattern_high = value; 1576 break; 1577 case SM501_2D_WINDOW_WIDTH: 1578 s->twoD_window_width = value; 1579 break; 1580 case SM501_2D_SOURCE_BASE: 1581 s->twoD_source_base = value; 1582 break; 1583 case SM501_2D_DESTINATION_BASE: 1584 s->twoD_destination_base = value; 1585 break; 1586 case SM501_2D_ALPHA: 1587 s->twoD_alpha = value; 1588 break; 1589 case SM501_2D_WRAP: 1590 s->twoD_wrap = value; 1591 break; 1592 case SM501_2D_STATUS: 1593 /* ignored, writing 0 should clear interrupt status */ 1594 break; 1595 default: 1596 qemu_log_mask(LOG_UNIMP, "sm501: not implemented 2d engine register " 1597 "write. addr=%" HWADDR_PRIx 1598 ", val=%" PRIx64 "\n", addr, value); 1599 } 1600 } 1601 1602 static const MemoryRegionOps sm501_2d_engine_ops = { 1603 .read = sm501_2d_engine_read, 1604 .write = sm501_2d_engine_write, 1605 .valid = { 1606 .min_access_size = 4, 1607 .max_access_size = 4, 1608 }, 1609 .endianness = DEVICE_LITTLE_ENDIAN, 1610 }; 1611 1612 /* draw line functions for all console modes */ 1613 1614 typedef void draw_line_func(uint8_t *d, const uint8_t *s, 1615 int width, const uint32_t *pal); 1616 1617 typedef void draw_hwc_line_func(uint8_t *d, const uint8_t *s, 1618 int width, const uint8_t *palette, 1619 int c_x, int c_y); 1620 1621 static void draw_line8_32(uint8_t *d, const uint8_t *s, int width, 1622 const uint32_t *pal) 1623 { 1624 uint8_t v, r, g, b; 1625 do { 1626 v = ldub_p(s); 1627 r = (pal[v] >> 16) & 0xff; 1628 g = (pal[v] >> 8) & 0xff; 1629 b = (pal[v] >> 0) & 0xff; 1630 *(uint32_t *)d = rgb_to_pixel32(r, g, b); 1631 s++; 1632 d += 4; 1633 } while (--width != 0); 1634 } 1635 1636 static void draw_line16_32(uint8_t *d, const uint8_t *s, int width, 1637 const uint32_t *pal) 1638 { 1639 uint16_t rgb565; 1640 uint8_t r, g, b; 1641 1642 do { 1643 rgb565 = lduw_le_p(s); 1644 r = (rgb565 >> 8) & 0xf8; 1645 g = (rgb565 >> 3) & 0xfc; 1646 b = (rgb565 << 3) & 0xf8; 1647 *(uint32_t *)d = rgb_to_pixel32(r, g, b); 1648 s += 2; 1649 d += 4; 1650 } while (--width != 0); 1651 } 1652 1653 static void draw_line32_32(uint8_t *d, const uint8_t *s, int width, 1654 const uint32_t *pal) 1655 { 1656 uint8_t r, g, b; 1657 1658 do { 1659 r = s[2]; 1660 g = s[1]; 1661 b = s[0]; 1662 *(uint32_t *)d = rgb_to_pixel32(r, g, b); 1663 s += 4; 1664 d += 4; 1665 } while (--width != 0); 1666 } 1667 1668 /** 1669 * Draw hardware cursor image on the given line. 1670 */ 1671 static void draw_hwc_line_32(uint8_t *d, const uint8_t *s, int width, 1672 const uint8_t *palette, int c_x, int c_y) 1673 { 1674 int i; 1675 uint8_t r, g, b, v, bitset = 0; 1676 1677 /* get cursor position */ 1678 assert(0 <= c_y && c_y < SM501_HWC_HEIGHT); 1679 s += SM501_HWC_WIDTH * c_y / 4; /* 4 pixels per byte */ 1680 d += c_x * 4; 1681 1682 for (i = 0; i < SM501_HWC_WIDTH && c_x + i < width; i++) { 1683 /* get pixel value */ 1684 if (i % 4 == 0) { 1685 bitset = ldub_p(s); 1686 s++; 1687 } 1688 v = bitset & 3; 1689 bitset >>= 2; 1690 1691 /* write pixel */ 1692 if (v) { 1693 v--; 1694 r = palette[v * 3 + 0]; 1695 g = palette[v * 3 + 1]; 1696 b = palette[v * 3 + 2]; 1697 *(uint32_t *)d = rgb_to_pixel32(r, g, b); 1698 } 1699 d += 4; 1700 } 1701 } 1702 1703 static void sm501_update_display(void *opaque) 1704 { 1705 SM501State *s = opaque; 1706 DisplaySurface *surface = qemu_console_surface(s->con); 1707 DirtyBitmapSnapshot *snap; 1708 int y, c_x = 0, c_y = 0; 1709 int crt = (s->dc_crt_control & SM501_DC_CRT_CONTROL_SEL) ? 1 : 0; 1710 int width = get_width(s, crt); 1711 int height = get_height(s, crt); 1712 int src_bpp = get_bpp(s, crt); 1713 int dst_bpp = surface_bytes_per_pixel(surface); 1714 draw_line_func *draw_line = NULL; 1715 draw_hwc_line_func *draw_hwc_line = NULL; 1716 int full_update = 0; 1717 int y_start = -1; 1718 ram_addr_t offset; 1719 uint32_t *palette; 1720 uint8_t hwc_palette[3 * 3]; 1721 uint8_t *hwc_src = NULL; 1722 1723 assert(dst_bpp == 4); /* Output is always 32-bit RGB */ 1724 1725 if (!((crt ? s->dc_crt_control : s->dc_panel_control) 1726 & SM501_DC_CRT_CONTROL_ENABLE)) { 1727 return; 1728 } 1729 1730 palette = (uint32_t *)(crt ? &s->dc_palette[SM501_DC_CRT_PALETTE - 1731 SM501_DC_PANEL_PALETTE] 1732 : &s->dc_palette[0]); 1733 1734 /* choose draw_line function */ 1735 switch (src_bpp) { 1736 case 1: 1737 draw_line = draw_line8_32; 1738 break; 1739 case 2: 1740 draw_line = draw_line16_32; 1741 break; 1742 case 4: 1743 draw_line = draw_line32_32; 1744 break; 1745 default: 1746 qemu_log_mask(LOG_GUEST_ERROR, "sm501: update display" 1747 "invalid control register value.\n"); 1748 return; 1749 } 1750 1751 /* set up to draw hardware cursor */ 1752 if (is_hwc_enabled(s, crt)) { 1753 /* choose cursor draw line function */ 1754 draw_hwc_line = draw_hwc_line_32; 1755 hwc_src = get_hwc_address(s, crt); 1756 c_x = get_hwc_x(s, crt); 1757 c_y = get_hwc_y(s, crt); 1758 get_hwc_palette(s, crt, hwc_palette); 1759 } 1760 1761 /* adjust console size */ 1762 if (s->last_width != width || s->last_height != height) { 1763 qemu_console_resize(s->con, width, height); 1764 surface = qemu_console_surface(s->con); 1765 s->last_width = width; 1766 s->last_height = height; 1767 full_update = 1; 1768 } 1769 1770 /* someone else requested a full update */ 1771 if (s->do_full_update) { 1772 s->do_full_update = false; 1773 full_update = 1; 1774 } 1775 1776 /* draw each line according to conditions */ 1777 offset = get_fb_addr(s, crt); 1778 snap = memory_region_snapshot_and_clear_dirty(&s->local_mem_region, 1779 offset, width * height * src_bpp, DIRTY_MEMORY_VGA); 1780 for (y = 0; y < height; y++, offset += width * src_bpp) { 1781 int update, update_hwc; 1782 1783 /* check if hardware cursor is enabled and we're within its range */ 1784 update_hwc = draw_hwc_line && c_y <= y && y < c_y + SM501_HWC_HEIGHT; 1785 update = full_update || update_hwc; 1786 /* check dirty flags for each line */ 1787 update |= memory_region_snapshot_get_dirty(&s->local_mem_region, snap, 1788 offset, width * src_bpp); 1789 1790 /* draw line and change status */ 1791 if (update) { 1792 uint8_t *d = surface_data(surface); 1793 d += y * width * dst_bpp; 1794 1795 /* draw graphics layer */ 1796 draw_line(d, s->local_mem + offset, width, palette); 1797 1798 /* draw hardware cursor */ 1799 if (update_hwc) { 1800 draw_hwc_line(d, hwc_src, width, hwc_palette, c_x, y - c_y); 1801 } 1802 1803 if (y_start < 0) { 1804 y_start = y; 1805 } 1806 } else { 1807 if (y_start >= 0) { 1808 /* flush to display */ 1809 dpy_gfx_update(s->con, 0, y_start, width, y - y_start); 1810 y_start = -1; 1811 } 1812 } 1813 } 1814 g_free(snap); 1815 1816 /* complete flush to display */ 1817 if (y_start >= 0) { 1818 dpy_gfx_update(s->con, 0, y_start, width, y - y_start); 1819 } 1820 } 1821 1822 static const GraphicHwOps sm501_ops = { 1823 .gfx_update = sm501_update_display, 1824 }; 1825 1826 static void sm501_reset(SM501State *s) 1827 { 1828 s->system_control = 0x00100000; /* 2D engine FIFO empty */ 1829 /* 1830 * Bits 17 (SH), 7 (CDR), 6:5 (Test), 2:0 (Bus) are all supposed 1831 * to be determined at reset by GPIO lines which set config bits. 1832 * We hardwire them: 1833 * SH = 0 : Hitachi Ready Polarity == Active Low 1834 * CDR = 0 : do not reset clock divider 1835 * TEST = 0 : Normal mode (not testing the silicon) 1836 * BUS = 0 : Hitachi SH3/SH4 1837 */ 1838 s->misc_control = SM501_MISC_DAC_POWER; 1839 s->gpio_31_0_control = 0; 1840 s->gpio_63_32_control = 0; 1841 s->dram_control = 0; 1842 s->arbitration_control = 0x05146732; 1843 s->irq_mask = 0; 1844 s->misc_timing = 0; 1845 s->power_mode_control = 0; 1846 s->i2c_byte_count = 0; 1847 s->i2c_status = 0; 1848 s->i2c_addr = 0; 1849 memset(s->i2c_data, 0, 16); 1850 s->dc_panel_control = 0x00010000; /* FIFO level 3 */ 1851 s->dc_video_control = 0; 1852 s->dc_crt_control = 0x00010000; 1853 s->twoD_source = 0; 1854 s->twoD_destination = 0; 1855 s->twoD_dimension = 0; 1856 s->twoD_control = 0; 1857 s->twoD_pitch = 0; 1858 s->twoD_foreground = 0; 1859 s->twoD_background = 0; 1860 s->twoD_stretch = 0; 1861 s->twoD_color_compare = 0; 1862 s->twoD_color_compare_mask = 0; 1863 s->twoD_mask = 0; 1864 s->twoD_clip_tl = 0; 1865 s->twoD_clip_br = 0; 1866 s->twoD_mono_pattern_low = 0; 1867 s->twoD_mono_pattern_high = 0; 1868 s->twoD_window_width = 0; 1869 s->twoD_source_base = 0; 1870 s->twoD_destination_base = 0; 1871 s->twoD_alpha = 0; 1872 s->twoD_wrap = 0; 1873 } 1874 1875 static void sm501_init(SM501State *s, DeviceState *dev, 1876 uint32_t local_mem_bytes) 1877 { 1878 s->local_mem_size_index = get_local_mem_size_index(local_mem_bytes); 1879 1880 /* local memory */ 1881 memory_region_init_ram(&s->local_mem_region, OBJECT(dev), "sm501.local", 1882 get_local_mem_size(s), &error_fatal); 1883 memory_region_set_log(&s->local_mem_region, true, DIRTY_MEMORY_VGA); 1884 s->local_mem = memory_region_get_ram_ptr(&s->local_mem_region); 1885 1886 /* i2c */ 1887 s->i2c_bus = i2c_init_bus(dev, "sm501.i2c"); 1888 /* ddc */ 1889 I2CDDCState *ddc = I2CDDC(qdev_new(TYPE_I2CDDC)); 1890 i2c_slave_set_address(I2C_SLAVE(ddc), 0x50); 1891 qdev_realize_and_unref(DEVICE(ddc), BUS(s->i2c_bus), &error_abort); 1892 1893 /* mmio */ 1894 memory_region_init(&s->mmio_region, OBJECT(dev), "sm501.mmio", MMIO_SIZE); 1895 memory_region_init_io(&s->system_config_region, OBJECT(dev), 1896 &sm501_system_config_ops, s, 1897 "sm501-system-config", 0x6c); 1898 memory_region_add_subregion(&s->mmio_region, SM501_SYS_CONFIG, 1899 &s->system_config_region); 1900 memory_region_init_io(&s->i2c_region, OBJECT(dev), &sm501_i2c_ops, s, 1901 "sm501-i2c", 0x14); 1902 memory_region_add_subregion(&s->mmio_region, SM501_I2C, &s->i2c_region); 1903 memory_region_init_io(&s->disp_ctrl_region, OBJECT(dev), 1904 &sm501_disp_ctrl_ops, s, 1905 "sm501-disp-ctrl", 0x1000); 1906 memory_region_add_subregion(&s->mmio_region, SM501_DC, 1907 &s->disp_ctrl_region); 1908 memory_region_init_io(&s->twoD_engine_region, OBJECT(dev), 1909 &sm501_2d_engine_ops, s, 1910 "sm501-2d-engine", 0x54); 1911 memory_region_add_subregion(&s->mmio_region, SM501_2D_ENGINE, 1912 &s->twoD_engine_region); 1913 1914 /* create qemu graphic console */ 1915 s->con = graphic_console_init(dev, 0, &sm501_ops, s); 1916 } 1917 1918 static const VMStateDescription vmstate_sm501_state = { 1919 .name = "sm501-state", 1920 .version_id = 1, 1921 .minimum_version_id = 1, 1922 .fields = (VMStateField[]) { 1923 VMSTATE_UINT32(local_mem_size_index, SM501State), 1924 VMSTATE_UINT32(system_control, SM501State), 1925 VMSTATE_UINT32(misc_control, SM501State), 1926 VMSTATE_UINT32(gpio_31_0_control, SM501State), 1927 VMSTATE_UINT32(gpio_63_32_control, SM501State), 1928 VMSTATE_UINT32(dram_control, SM501State), 1929 VMSTATE_UINT32(arbitration_control, SM501State), 1930 VMSTATE_UINT32(irq_mask, SM501State), 1931 VMSTATE_UINT32(misc_timing, SM501State), 1932 VMSTATE_UINT32(power_mode_control, SM501State), 1933 VMSTATE_UINT32(uart0_ier, SM501State), 1934 VMSTATE_UINT32(uart0_lcr, SM501State), 1935 VMSTATE_UINT32(uart0_mcr, SM501State), 1936 VMSTATE_UINT32(uart0_scr, SM501State), 1937 VMSTATE_UINT8_ARRAY(dc_palette, SM501State, DC_PALETTE_ENTRIES), 1938 VMSTATE_UINT32(dc_panel_control, SM501State), 1939 VMSTATE_UINT32(dc_panel_panning_control, SM501State), 1940 VMSTATE_UINT32(dc_panel_fb_addr, SM501State), 1941 VMSTATE_UINT32(dc_panel_fb_offset, SM501State), 1942 VMSTATE_UINT32(dc_panel_fb_width, SM501State), 1943 VMSTATE_UINT32(dc_panel_fb_height, SM501State), 1944 VMSTATE_UINT32(dc_panel_tl_location, SM501State), 1945 VMSTATE_UINT32(dc_panel_br_location, SM501State), 1946 VMSTATE_UINT32(dc_panel_h_total, SM501State), 1947 VMSTATE_UINT32(dc_panel_h_sync, SM501State), 1948 VMSTATE_UINT32(dc_panel_v_total, SM501State), 1949 VMSTATE_UINT32(dc_panel_v_sync, SM501State), 1950 VMSTATE_UINT32(dc_panel_hwc_addr, SM501State), 1951 VMSTATE_UINT32(dc_panel_hwc_location, SM501State), 1952 VMSTATE_UINT32(dc_panel_hwc_color_1_2, SM501State), 1953 VMSTATE_UINT32(dc_panel_hwc_color_3, SM501State), 1954 VMSTATE_UINT32(dc_video_control, SM501State), 1955 VMSTATE_UINT32(dc_crt_control, SM501State), 1956 VMSTATE_UINT32(dc_crt_fb_addr, SM501State), 1957 VMSTATE_UINT32(dc_crt_fb_offset, SM501State), 1958 VMSTATE_UINT32(dc_crt_h_total, SM501State), 1959 VMSTATE_UINT32(dc_crt_h_sync, SM501State), 1960 VMSTATE_UINT32(dc_crt_v_total, SM501State), 1961 VMSTATE_UINT32(dc_crt_v_sync, SM501State), 1962 VMSTATE_UINT32(dc_crt_hwc_addr, SM501State), 1963 VMSTATE_UINT32(dc_crt_hwc_location, SM501State), 1964 VMSTATE_UINT32(dc_crt_hwc_color_1_2, SM501State), 1965 VMSTATE_UINT32(dc_crt_hwc_color_3, SM501State), 1966 VMSTATE_UINT32(twoD_source, SM501State), 1967 VMSTATE_UINT32(twoD_destination, SM501State), 1968 VMSTATE_UINT32(twoD_dimension, SM501State), 1969 VMSTATE_UINT32(twoD_control, SM501State), 1970 VMSTATE_UINT32(twoD_pitch, SM501State), 1971 VMSTATE_UINT32(twoD_foreground, SM501State), 1972 VMSTATE_UINT32(twoD_background, SM501State), 1973 VMSTATE_UINT32(twoD_stretch, SM501State), 1974 VMSTATE_UINT32(twoD_color_compare, SM501State), 1975 VMSTATE_UINT32(twoD_color_compare_mask, SM501State), 1976 VMSTATE_UINT32(twoD_mask, SM501State), 1977 VMSTATE_UINT32(twoD_clip_tl, SM501State), 1978 VMSTATE_UINT32(twoD_clip_br, SM501State), 1979 VMSTATE_UINT32(twoD_mono_pattern_low, SM501State), 1980 VMSTATE_UINT32(twoD_mono_pattern_high, SM501State), 1981 VMSTATE_UINT32(twoD_window_width, SM501State), 1982 VMSTATE_UINT32(twoD_source_base, SM501State), 1983 VMSTATE_UINT32(twoD_destination_base, SM501State), 1984 VMSTATE_UINT32(twoD_alpha, SM501State), 1985 VMSTATE_UINT32(twoD_wrap, SM501State), 1986 /* Added in version 2 */ 1987 VMSTATE_UINT8(i2c_byte_count, SM501State), 1988 VMSTATE_UINT8(i2c_status, SM501State), 1989 VMSTATE_UINT8(i2c_addr, SM501State), 1990 VMSTATE_UINT8_ARRAY(i2c_data, SM501State, 16), 1991 VMSTATE_END_OF_LIST() 1992 } 1993 }; 1994 1995 #define TYPE_SYSBUS_SM501 "sysbus-sm501" 1996 OBJECT_DECLARE_SIMPLE_TYPE(SM501SysBusState, SYSBUS_SM501) 1997 1998 struct SM501SysBusState { 1999 /*< private >*/ 2000 SysBusDevice parent_obj; 2001 /*< public >*/ 2002 SM501State state; 2003 uint32_t vram_size; 2004 SerialMM serial; 2005 OHCISysBusState ohci; 2006 }; 2007 2008 static void sm501_realize_sysbus(DeviceState *dev, Error **errp) 2009 { 2010 SM501SysBusState *s = SYSBUS_SM501(dev); 2011 SysBusDevice *sbd = SYS_BUS_DEVICE(dev); 2012 MemoryRegion *mr; 2013 2014 sm501_init(&s->state, dev, s->vram_size); 2015 if (get_local_mem_size(&s->state) != s->vram_size) { 2016 error_setg(errp, "Invalid VRAM size, nearest valid size is %" PRIu32, 2017 get_local_mem_size(&s->state)); 2018 return; 2019 } 2020 sysbus_init_mmio(sbd, &s->state.local_mem_region); 2021 sysbus_init_mmio(sbd, &s->state.mmio_region); 2022 2023 /* bridge to usb host emulation module */ 2024 sysbus_realize_and_unref(SYS_BUS_DEVICE(&s->ohci), &error_fatal); 2025 memory_region_add_subregion(&s->state.mmio_region, SM501_USB_HOST, 2026 sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->ohci), 0)); 2027 sysbus_pass_irq(sbd, SYS_BUS_DEVICE(&s->ohci)); 2028 2029 /* bridge to serial emulation module */ 2030 sysbus_realize(SYS_BUS_DEVICE(&s->serial), &error_fatal); 2031 mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->serial), 0); 2032 memory_region_add_subregion(&s->state.mmio_region, SM501_UART0, mr); 2033 /* TODO : chain irq to IRL */ 2034 } 2035 2036 static Property sm501_sysbus_properties[] = { 2037 DEFINE_PROP_UINT32("vram-size", SM501SysBusState, vram_size, 0), 2038 DEFINE_PROP_END_OF_LIST(), 2039 }; 2040 2041 static void sm501_reset_sysbus(DeviceState *dev) 2042 { 2043 SM501SysBusState *s = SYSBUS_SM501(dev); 2044 sm501_reset(&s->state); 2045 } 2046 2047 static const VMStateDescription vmstate_sm501_sysbus = { 2048 .name = TYPE_SYSBUS_SM501, 2049 .version_id = 2, 2050 .minimum_version_id = 2, 2051 .fields = (VMStateField[]) { 2052 VMSTATE_STRUCT(state, SM501SysBusState, 1, 2053 vmstate_sm501_state, SM501State), 2054 VMSTATE_END_OF_LIST() 2055 } 2056 }; 2057 2058 static void sm501_sysbus_class_init(ObjectClass *klass, void *data) 2059 { 2060 DeviceClass *dc = DEVICE_CLASS(klass); 2061 2062 dc->realize = sm501_realize_sysbus; 2063 set_bit(DEVICE_CATEGORY_DISPLAY, dc->categories); 2064 dc->desc = "SM501 Multimedia Companion"; 2065 device_class_set_props(dc, sm501_sysbus_properties); 2066 dc->reset = sm501_reset_sysbus; 2067 dc->vmsd = &vmstate_sm501_sysbus; 2068 } 2069 2070 static void sm501_sysbus_init(Object *o) 2071 { 2072 SM501SysBusState *sm501 = SYSBUS_SM501(o); 2073 OHCISysBusState *ohci = &sm501->ohci; 2074 SerialMM *smm = &sm501->serial; 2075 2076 object_initialize_child(o, "ohci", ohci, TYPE_SYSBUS_OHCI); 2077 object_property_add_alias(o, "dma-offset", OBJECT(ohci), "dma-offset"); 2078 qdev_prop_set_uint32(DEVICE(ohci), "num-ports", 2); 2079 2080 object_initialize_child(o, "serial", smm, TYPE_SERIAL_MM); 2081 qdev_set_legacy_instance_id(DEVICE(smm), SM501_UART0, 2); 2082 qdev_prop_set_uint8(DEVICE(smm), "regshift", 2); 2083 qdev_prop_set_uint8(DEVICE(smm), "endianness", DEVICE_LITTLE_ENDIAN); 2084 2085 object_property_add_alias(o, "chardev", OBJECT(smm), "chardev"); 2086 } 2087 2088 static const TypeInfo sm501_sysbus_info = { 2089 .name = TYPE_SYSBUS_SM501, 2090 .parent = TYPE_SYS_BUS_DEVICE, 2091 .instance_size = sizeof(SM501SysBusState), 2092 .class_init = sm501_sysbus_class_init, 2093 .instance_init = sm501_sysbus_init, 2094 }; 2095 2096 #define TYPE_PCI_SM501 "sm501" 2097 OBJECT_DECLARE_SIMPLE_TYPE(SM501PCIState, PCI_SM501) 2098 2099 struct SM501PCIState { 2100 /*< private >*/ 2101 PCIDevice parent_obj; 2102 /*< public >*/ 2103 SM501State state; 2104 uint32_t vram_size; 2105 }; 2106 2107 static void sm501_realize_pci(PCIDevice *dev, Error **errp) 2108 { 2109 SM501PCIState *s = PCI_SM501(dev); 2110 2111 sm501_init(&s->state, DEVICE(dev), s->vram_size); 2112 if (get_local_mem_size(&s->state) != s->vram_size) { 2113 error_setg(errp, "Invalid VRAM size, nearest valid size is %" PRIu32, 2114 get_local_mem_size(&s->state)); 2115 return; 2116 } 2117 pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, 2118 &s->state.local_mem_region); 2119 pci_register_bar(dev, 1, PCI_BASE_ADDRESS_SPACE_MEMORY, 2120 &s->state.mmio_region); 2121 } 2122 2123 static Property sm501_pci_properties[] = { 2124 DEFINE_PROP_UINT32("vram-size", SM501PCIState, vram_size, 64 * MiB), 2125 DEFINE_PROP_END_OF_LIST(), 2126 }; 2127 2128 static void sm501_reset_pci(DeviceState *dev) 2129 { 2130 SM501PCIState *s = PCI_SM501(dev); 2131 sm501_reset(&s->state); 2132 /* Bits 2:0 of misc_control register is 001 for PCI */ 2133 s->state.misc_control |= 1; 2134 } 2135 2136 static const VMStateDescription vmstate_sm501_pci = { 2137 .name = TYPE_PCI_SM501, 2138 .version_id = 2, 2139 .minimum_version_id = 2, 2140 .fields = (VMStateField[]) { 2141 VMSTATE_PCI_DEVICE(parent_obj, SM501PCIState), 2142 VMSTATE_STRUCT(state, SM501PCIState, 1, 2143 vmstate_sm501_state, SM501State), 2144 VMSTATE_END_OF_LIST() 2145 } 2146 }; 2147 2148 static void sm501_pci_class_init(ObjectClass *klass, void *data) 2149 { 2150 DeviceClass *dc = DEVICE_CLASS(klass); 2151 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 2152 2153 k->realize = sm501_realize_pci; 2154 k->vendor_id = PCI_VENDOR_ID_SILICON_MOTION; 2155 k->device_id = PCI_DEVICE_ID_SM501; 2156 k->class_id = PCI_CLASS_DISPLAY_OTHER; 2157 set_bit(DEVICE_CATEGORY_DISPLAY, dc->categories); 2158 dc->desc = "SM501 Display Controller"; 2159 device_class_set_props(dc, sm501_pci_properties); 2160 dc->reset = sm501_reset_pci; 2161 dc->hotpluggable = false; 2162 dc->vmsd = &vmstate_sm501_pci; 2163 } 2164 2165 static const TypeInfo sm501_pci_info = { 2166 .name = TYPE_PCI_SM501, 2167 .parent = TYPE_PCI_DEVICE, 2168 .instance_size = sizeof(SM501PCIState), 2169 .class_init = sm501_pci_class_init, 2170 .interfaces = (InterfaceInfo[]) { 2171 { INTERFACE_CONVENTIONAL_PCI_DEVICE }, 2172 { }, 2173 }, 2174 }; 2175 2176 static void sm501_register_types(void) 2177 { 2178 type_register_static(&sm501_sysbus_info); 2179 type_register_static(&sm501_pci_info); 2180 } 2181 2182 type_init(sm501_register_types) 2183