xref: /openbmc/qemu/hw/display/sii9022.c (revision 709395f8)
1 /*
2  * Silicon Image SiI9022
3  *
4  * This is a pretty hollow emulation: all we do is acknowledge that we
5  * exist (chip ID) and confirm that we get switched over into DDC mode
6  * so the emulated host can proceed to read out EDID data. All subsequent
7  * set-up of connectors etc will be acknowledged and ignored.
8  *
9  * Copyright (C) 2018 Linus Walleij
10  *
11  * This work is licensed under the terms of the GNU GPL, version 2 or later.
12  * See the COPYING file in the top-level directory.
13  * SPDX-License-Identifier: GPL-2.0-or-later
14  */
15 
16 #include "qemu/osdep.h"
17 #include "qemu-common.h"
18 #include "hw/i2c/i2c.h"
19 #include "hw/i2c/i2c-ddc.h"
20 #include "trace.h"
21 
22 #define SII9022_SYS_CTRL_DATA 0x1a
23 #define SII9022_SYS_CTRL_PWR_DWN 0x10
24 #define SII9022_SYS_CTRL_AV_MUTE 0x08
25 #define SII9022_SYS_CTRL_DDC_BUS_REQ 0x04
26 #define SII9022_SYS_CTRL_DDC_BUS_GRTD 0x02
27 #define SII9022_SYS_CTRL_OUTPUT_MODE 0x01
28 #define SII9022_SYS_CTRL_OUTPUT_HDMI 1
29 #define SII9022_SYS_CTRL_OUTPUT_DVI 0
30 #define SII9022_REG_CHIPID 0x1b
31 #define SII9022_INT_ENABLE 0x3c
32 #define SII9022_INT_STATUS 0x3d
33 #define SII9022_INT_STATUS_HOTPLUG 0x01;
34 #define SII9022_INT_STATUS_PLUGGED 0x04;
35 
36 #define TYPE_SII9022 "sii9022"
37 #define SII9022(obj) OBJECT_CHECK(sii9022_state, (obj), TYPE_SII9022)
38 
39 typedef struct sii9022_state {
40     I2CSlave parent_obj;
41     uint8_t ptr;
42     bool addr_byte;
43     bool ddc_req;
44     bool ddc_skip_finish;
45     bool ddc;
46 } sii9022_state;
47 
48 static const VMStateDescription vmstate_sii9022 = {
49     .name = "sii9022",
50     .version_id = 1,
51     .minimum_version_id = 1,
52     .fields = (VMStateField[]) {
53         VMSTATE_I2C_SLAVE(parent_obj, sii9022_state),
54         VMSTATE_UINT8(ptr, sii9022_state),
55         VMSTATE_BOOL(addr_byte, sii9022_state),
56         VMSTATE_BOOL(ddc_req, sii9022_state),
57         VMSTATE_BOOL(ddc_skip_finish, sii9022_state),
58         VMSTATE_BOOL(ddc, sii9022_state),
59         VMSTATE_END_OF_LIST()
60     }
61 };
62 
63 static int sii9022_event(I2CSlave *i2c, enum i2c_event event)
64 {
65     sii9022_state *s = SII9022(i2c);
66 
67     switch (event) {
68     case I2C_START_SEND:
69         s->addr_byte = true;
70         break;
71     case I2C_START_RECV:
72         break;
73     case I2C_FINISH:
74         break;
75     case I2C_NACK:
76         break;
77     }
78 
79     return 0;
80 }
81 
82 static uint8_t sii9022_rx(I2CSlave *i2c)
83 {
84     sii9022_state *s = SII9022(i2c);
85     uint8_t res = 0x00;
86 
87     switch (s->ptr) {
88     case SII9022_SYS_CTRL_DATA:
89         if (s->ddc_req) {
90             /* Acknowledge DDC bus request */
91             res = SII9022_SYS_CTRL_DDC_BUS_GRTD | SII9022_SYS_CTRL_DDC_BUS_REQ;
92         }
93         break;
94     case SII9022_REG_CHIPID:
95         res = 0xb0;
96         break;
97     case SII9022_INT_STATUS:
98         /* Something is cold-plugged in, no interrupts */
99         res = SII9022_INT_STATUS_PLUGGED;
100         break;
101     default:
102         break;
103     }
104 
105     trace_sii9022_read_reg(s->ptr, res);
106     s->ptr++;
107 
108     return res;
109 }
110 
111 static int sii9022_tx(I2CSlave *i2c, uint8_t data)
112 {
113     sii9022_state *s = SII9022(i2c);
114 
115     if (s->addr_byte) {
116         s->ptr = data;
117         s->addr_byte = false;
118         return 0;
119     }
120 
121     switch (s->ptr) {
122     case SII9022_SYS_CTRL_DATA:
123         if (data & SII9022_SYS_CTRL_DDC_BUS_REQ) {
124             s->ddc_req = true;
125             if (data & SII9022_SYS_CTRL_DDC_BUS_GRTD) {
126                 s->ddc = true;
127                 /* Skip this finish since we just switched to DDC */
128                 s->ddc_skip_finish = true;
129                 trace_sii9022_switch_mode("DDC");
130             }
131         } else {
132             s->ddc_req = false;
133             s->ddc = false;
134             trace_sii9022_switch_mode("normal");
135         }
136         break;
137     default:
138         break;
139     }
140 
141     trace_sii9022_write_reg(s->ptr, data);
142     s->ptr++;
143 
144     return 0;
145 }
146 
147 static void sii9022_reset(DeviceState *dev)
148 {
149     sii9022_state *s = SII9022(dev);
150 
151     s->ptr = 0;
152     s->addr_byte = false;
153     s->ddc_req = false;
154     s->ddc_skip_finish = false;
155     s->ddc = false;
156 }
157 
158 static void sii9022_realize(DeviceState *dev, Error **errp)
159 {
160     I2CBus *bus;
161 
162     bus = I2C_BUS(qdev_get_parent_bus(dev));
163     i2c_create_slave(bus, TYPE_I2CDDC, 0x50);
164 }
165 
166 static void sii9022_class_init(ObjectClass *klass, void *data)
167 {
168     DeviceClass *dc = DEVICE_CLASS(klass);
169     I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
170 
171     k->event = sii9022_event;
172     k->recv = sii9022_rx;
173     k->send = sii9022_tx;
174     dc->reset = sii9022_reset;
175     dc->realize = sii9022_realize;
176     dc->vmsd = &vmstate_sii9022;
177 }
178 
179 static const TypeInfo sii9022_info = {
180     .name          = TYPE_SII9022,
181     .parent        = TYPE_I2C_SLAVE,
182     .instance_size = sizeof(sii9022_state),
183     .class_init    = sii9022_class_init,
184 };
185 
186 static void sii9022_register_types(void)
187 {
188     type_register_static(&sii9022_info);
189 }
190 
191 type_init(sii9022_register_types)
192