xref: /openbmc/qemu/hw/display/sii9022.c (revision 1f42e246)
1 /*
2  * Silicon Image SiI9022
3  *
4  * This is a pretty hollow emulation: all we do is acknowledge that we
5  * exist (chip ID) and confirm that we get switched over into DDC mode
6  * so the emulated host can proceed to read out EDID data. All subsequent
7  * set-up of connectors etc will be acknowledged and ignored.
8  *
9  * Copyright (C) 2018 Linus Walleij
10  *
11  * This work is licensed under the terms of the GNU GPL, version 2 or later.
12  * See the COPYING file in the top-level directory.
13  * SPDX-License-Identifier: GPL-2.0-or-later
14  */
15 
16 #include "qemu/osdep.h"
17 #include "qemu/module.h"
18 #include "hw/i2c/i2c.h"
19 #include "migration/vmstate.h"
20 #include "hw/display/i2c-ddc.h"
21 #include "trace.h"
22 
23 #define SII9022_SYS_CTRL_DATA 0x1a
24 #define SII9022_SYS_CTRL_PWR_DWN 0x10
25 #define SII9022_SYS_CTRL_AV_MUTE 0x08
26 #define SII9022_SYS_CTRL_DDC_BUS_REQ 0x04
27 #define SII9022_SYS_CTRL_DDC_BUS_GRTD 0x02
28 #define SII9022_SYS_CTRL_OUTPUT_MODE 0x01
29 #define SII9022_SYS_CTRL_OUTPUT_HDMI 1
30 #define SII9022_SYS_CTRL_OUTPUT_DVI 0
31 #define SII9022_REG_CHIPID 0x1b
32 #define SII9022_INT_ENABLE 0x3c
33 #define SII9022_INT_STATUS 0x3d
34 #define SII9022_INT_STATUS_HOTPLUG 0x01;
35 #define SII9022_INT_STATUS_PLUGGED 0x04;
36 
37 #define TYPE_SII9022 "sii9022"
38 #define SII9022(obj) OBJECT_CHECK(sii9022_state, (obj), TYPE_SII9022)
39 
40 typedef struct sii9022_state {
41     I2CSlave parent_obj;
42     uint8_t ptr;
43     bool addr_byte;
44     bool ddc_req;
45     bool ddc_skip_finish;
46     bool ddc;
47 } sii9022_state;
48 
49 static const VMStateDescription vmstate_sii9022 = {
50     .name = "sii9022",
51     .version_id = 1,
52     .minimum_version_id = 1,
53     .fields = (VMStateField[]) {
54         VMSTATE_I2C_SLAVE(parent_obj, sii9022_state),
55         VMSTATE_UINT8(ptr, sii9022_state),
56         VMSTATE_BOOL(addr_byte, sii9022_state),
57         VMSTATE_BOOL(ddc_req, sii9022_state),
58         VMSTATE_BOOL(ddc_skip_finish, sii9022_state),
59         VMSTATE_BOOL(ddc, sii9022_state),
60         VMSTATE_END_OF_LIST()
61     }
62 };
63 
64 static int sii9022_event(I2CSlave *i2c, enum i2c_event event)
65 {
66     sii9022_state *s = SII9022(i2c);
67 
68     switch (event) {
69     case I2C_START_SEND:
70         s->addr_byte = true;
71         break;
72     case I2C_START_RECV:
73         break;
74     case I2C_FINISH:
75         break;
76     case I2C_NACK:
77         break;
78     }
79 
80     return 0;
81 }
82 
83 static uint8_t sii9022_rx(I2CSlave *i2c)
84 {
85     sii9022_state *s = SII9022(i2c);
86     uint8_t res = 0x00;
87 
88     switch (s->ptr) {
89     case SII9022_SYS_CTRL_DATA:
90         if (s->ddc_req) {
91             /* Acknowledge DDC bus request */
92             res = SII9022_SYS_CTRL_DDC_BUS_GRTD | SII9022_SYS_CTRL_DDC_BUS_REQ;
93         }
94         break;
95     case SII9022_REG_CHIPID:
96         res = 0xb0;
97         break;
98     case SII9022_INT_STATUS:
99         /* Something is cold-plugged in, no interrupts */
100         res = SII9022_INT_STATUS_PLUGGED;
101         break;
102     default:
103         break;
104     }
105 
106     trace_sii9022_read_reg(s->ptr, res);
107     s->ptr++;
108 
109     return res;
110 }
111 
112 static int sii9022_tx(I2CSlave *i2c, uint8_t data)
113 {
114     sii9022_state *s = SII9022(i2c);
115 
116     if (s->addr_byte) {
117         s->ptr = data;
118         s->addr_byte = false;
119         return 0;
120     }
121 
122     switch (s->ptr) {
123     case SII9022_SYS_CTRL_DATA:
124         if (data & SII9022_SYS_CTRL_DDC_BUS_REQ) {
125             s->ddc_req = true;
126             if (data & SII9022_SYS_CTRL_DDC_BUS_GRTD) {
127                 s->ddc = true;
128                 /* Skip this finish since we just switched to DDC */
129                 s->ddc_skip_finish = true;
130                 trace_sii9022_switch_mode("DDC");
131             }
132         } else {
133             s->ddc_req = false;
134             s->ddc = false;
135             trace_sii9022_switch_mode("normal");
136         }
137         break;
138     default:
139         break;
140     }
141 
142     trace_sii9022_write_reg(s->ptr, data);
143     s->ptr++;
144 
145     return 0;
146 }
147 
148 static void sii9022_reset(DeviceState *dev)
149 {
150     sii9022_state *s = SII9022(dev);
151 
152     s->ptr = 0;
153     s->addr_byte = false;
154     s->ddc_req = false;
155     s->ddc_skip_finish = false;
156     s->ddc = false;
157 }
158 
159 static void sii9022_realize(DeviceState *dev, Error **errp)
160 {
161     I2CBus *bus;
162 
163     bus = I2C_BUS(qdev_get_parent_bus(dev));
164     i2c_slave_create_simple(bus, TYPE_I2CDDC, 0x50);
165 }
166 
167 static void sii9022_class_init(ObjectClass *klass, void *data)
168 {
169     DeviceClass *dc = DEVICE_CLASS(klass);
170     I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
171 
172     k->event = sii9022_event;
173     k->recv = sii9022_rx;
174     k->send = sii9022_tx;
175     dc->reset = sii9022_reset;
176     dc->realize = sii9022_realize;
177     dc->vmsd = &vmstate_sii9022;
178 }
179 
180 static const TypeInfo sii9022_info = {
181     .name          = TYPE_SII9022,
182     .parent        = TYPE_I2C_SLAVE,
183     .instance_size = sizeof(sii9022_state),
184     .class_init    = sii9022_class_init,
185 };
186 
187 static void sii9022_register_types(void)
188 {
189     type_register_static(&sii9022_info);
190 }
191 
192 type_init(sii9022_register_types)
193