1 /* 2 * Arm PrimeCell PL110 Color LCD Controller 3 * 4 * Copyright (c) 2005-2009 CodeSourcery. 5 * Written by Paul Brook 6 * 7 * This code is licensed under the GNU LGPL 8 */ 9 10 #include "qemu/osdep.h" 11 #include "hw/irq.h" 12 #include "hw/sysbus.h" 13 #include "migration/vmstate.h" 14 #include "ui/console.h" 15 #include "framebuffer.h" 16 #include "ui/pixel_ops.h" 17 #include "qemu/timer.h" 18 #include "qemu/log.h" 19 #include "qemu/module.h" 20 21 #define PL110_CR_EN 0x001 22 #define PL110_CR_BGR 0x100 23 #define PL110_CR_BEBO 0x200 24 #define PL110_CR_BEPO 0x400 25 #define PL110_CR_PWR 0x800 26 #define PL110_IE_NB 0x004 27 #define PL110_IE_VC 0x008 28 29 enum pl110_bppmode 30 { 31 BPP_1, 32 BPP_2, 33 BPP_4, 34 BPP_8, 35 BPP_16, 36 BPP_32, 37 BPP_16_565, /* PL111 only */ 38 BPP_12 /* PL111 only */ 39 }; 40 41 42 /* The Versatile/PB uses a slightly modified PL110 controller. */ 43 enum pl110_version 44 { 45 PL110, 46 PL110_VERSATILE, 47 PL111 48 }; 49 50 #define TYPE_PL110 "pl110" 51 #define PL110(obj) OBJECT_CHECK(PL110State, (obj), TYPE_PL110) 52 53 typedef struct PL110State { 54 SysBusDevice parent_obj; 55 56 MemoryRegion iomem; 57 MemoryRegionSection fbsection; 58 QemuConsole *con; 59 QEMUTimer *vblank_timer; 60 61 int version; 62 uint32_t timing[4]; 63 uint32_t cr; 64 uint32_t upbase; 65 uint32_t lpbase; 66 uint32_t int_status; 67 uint32_t int_mask; 68 int cols; 69 int rows; 70 enum pl110_bppmode bpp; 71 int invalidate; 72 uint32_t mux_ctrl; 73 uint32_t palette[256]; 74 uint32_t raw_palette[128]; 75 qemu_irq irq; 76 } PL110State; 77 78 static int vmstate_pl110_post_load(void *opaque, int version_id); 79 80 static const VMStateDescription vmstate_pl110 = { 81 .name = "pl110", 82 .version_id = 2, 83 .minimum_version_id = 1, 84 .post_load = vmstate_pl110_post_load, 85 .fields = (VMStateField[]) { 86 VMSTATE_INT32(version, PL110State), 87 VMSTATE_UINT32_ARRAY(timing, PL110State, 4), 88 VMSTATE_UINT32(cr, PL110State), 89 VMSTATE_UINT32(upbase, PL110State), 90 VMSTATE_UINT32(lpbase, PL110State), 91 VMSTATE_UINT32(int_status, PL110State), 92 VMSTATE_UINT32(int_mask, PL110State), 93 VMSTATE_INT32(cols, PL110State), 94 VMSTATE_INT32(rows, PL110State), 95 VMSTATE_UINT32(bpp, PL110State), 96 VMSTATE_INT32(invalidate, PL110State), 97 VMSTATE_UINT32_ARRAY(palette, PL110State, 256), 98 VMSTATE_UINT32_ARRAY(raw_palette, PL110State, 128), 99 VMSTATE_UINT32_V(mux_ctrl, PL110State, 2), 100 VMSTATE_END_OF_LIST() 101 } 102 }; 103 104 static const unsigned char pl110_id[] = 105 { 0x10, 0x11, 0x04, 0x00, 0x0d, 0xf0, 0x05, 0xb1 }; 106 107 static const unsigned char pl111_id[] = { 108 0x11, 0x11, 0x24, 0x00, 0x0d, 0xf0, 0x05, 0xb1 109 }; 110 111 112 /* Indexed by pl110_version */ 113 static const unsigned char *idregs[] = { 114 pl110_id, 115 /* The ARM documentation (DDI0224C) says the CLCDC on the Versatile board 116 * has a different ID (0x93, 0x10, 0x04, 0x00, ...). However the hardware 117 * itself has the same ID values as a stock PL110, and guests (in 118 * particular Linux) rely on this. We emulate what the hardware does, 119 * rather than what the docs claim it ought to do. 120 */ 121 pl110_id, 122 pl111_id 123 }; 124 125 #define BITS 8 126 #include "pl110_template.h" 127 #define BITS 15 128 #include "pl110_template.h" 129 #define BITS 16 130 #include "pl110_template.h" 131 #define BITS 24 132 #include "pl110_template.h" 133 #define BITS 32 134 #include "pl110_template.h" 135 136 static int pl110_enabled(PL110State *s) 137 { 138 return (s->cr & PL110_CR_EN) && (s->cr & PL110_CR_PWR); 139 } 140 141 static void pl110_update_display(void *opaque) 142 { 143 PL110State *s = (PL110State *)opaque; 144 SysBusDevice *sbd; 145 DisplaySurface *surface = qemu_console_surface(s->con); 146 drawfn* fntable; 147 drawfn fn; 148 int dest_width; 149 int src_width; 150 int bpp_offset; 151 int first; 152 int last; 153 154 if (!pl110_enabled(s)) { 155 return; 156 } 157 158 sbd = SYS_BUS_DEVICE(s); 159 160 switch (surface_bits_per_pixel(surface)) { 161 case 0: 162 return; 163 case 8: 164 fntable = pl110_draw_fn_8; 165 dest_width = 1; 166 break; 167 case 15: 168 fntable = pl110_draw_fn_15; 169 dest_width = 2; 170 break; 171 case 16: 172 fntable = pl110_draw_fn_16; 173 dest_width = 2; 174 break; 175 case 24: 176 fntable = pl110_draw_fn_24; 177 dest_width = 3; 178 break; 179 case 32: 180 fntable = pl110_draw_fn_32; 181 dest_width = 4; 182 break; 183 default: 184 fprintf(stderr, "pl110: Bad color depth\n"); 185 exit(1); 186 } 187 if (s->cr & PL110_CR_BGR) 188 bpp_offset = 0; 189 else 190 bpp_offset = 24; 191 192 if ((s->version != PL111) && (s->bpp == BPP_16)) { 193 /* The PL110's native 16 bit mode is 5551; however 194 * most boards with a PL110 implement an external 195 * mux which allows bits to be reshuffled to give 196 * 565 format. The mux is typically controlled by 197 * an external system register. 198 * This is controlled by a GPIO input pin 199 * so boards can wire it up to their register. 200 * 201 * The PL111 straightforwardly implements both 202 * 5551 and 565 under control of the bpp field 203 * in the LCDControl register. 204 */ 205 switch (s->mux_ctrl) { 206 case 3: /* 565 BGR */ 207 bpp_offset = (BPP_16_565 - BPP_16); 208 break; 209 case 1: /* 5551 */ 210 break; 211 case 0: /* 888; also if we have loaded vmstate from an old version */ 212 case 2: /* 565 RGB */ 213 default: 214 /* treat as 565 but honour BGR bit */ 215 bpp_offset += (BPP_16_565 - BPP_16); 216 break; 217 } 218 } 219 220 if (s->cr & PL110_CR_BEBO) 221 fn = fntable[s->bpp + 8 + bpp_offset]; 222 else if (s->cr & PL110_CR_BEPO) 223 fn = fntable[s->bpp + 16 + bpp_offset]; 224 else 225 fn = fntable[s->bpp + bpp_offset]; 226 227 src_width = s->cols; 228 switch (s->bpp) { 229 case BPP_1: 230 src_width >>= 3; 231 break; 232 case BPP_2: 233 src_width >>= 2; 234 break; 235 case BPP_4: 236 src_width >>= 1; 237 break; 238 case BPP_8: 239 break; 240 case BPP_16: 241 case BPP_16_565: 242 case BPP_12: 243 src_width <<= 1; 244 break; 245 case BPP_32: 246 src_width <<= 2; 247 break; 248 } 249 dest_width *= s->cols; 250 first = 0; 251 if (s->invalidate) { 252 framebuffer_update_memory_section(&s->fbsection, 253 sysbus_address_space(sbd), 254 s->upbase, 255 s->rows, src_width); 256 } 257 258 framebuffer_update_display(surface, &s->fbsection, 259 s->cols, s->rows, 260 src_width, dest_width, 0, 261 s->invalidate, 262 fn, s->palette, 263 &first, &last); 264 265 if (first >= 0) { 266 dpy_gfx_update(s->con, 0, first, s->cols, last - first + 1); 267 } 268 s->invalidate = 0; 269 } 270 271 static void pl110_invalidate_display(void * opaque) 272 { 273 PL110State *s = (PL110State *)opaque; 274 s->invalidate = 1; 275 if (pl110_enabled(s)) { 276 qemu_console_resize(s->con, s->cols, s->rows); 277 } 278 } 279 280 static void pl110_update_palette(PL110State *s, int n) 281 { 282 DisplaySurface *surface = qemu_console_surface(s->con); 283 int i; 284 uint32_t raw; 285 unsigned int r, g, b; 286 287 raw = s->raw_palette[n]; 288 n <<= 1; 289 for (i = 0; i < 2; i++) { 290 r = (raw & 0x1f) << 3; 291 raw >>= 5; 292 g = (raw & 0x1f) << 3; 293 raw >>= 5; 294 b = (raw & 0x1f) << 3; 295 /* The I bit is ignored. */ 296 raw >>= 6; 297 switch (surface_bits_per_pixel(surface)) { 298 case 8: 299 s->palette[n] = rgb_to_pixel8(r, g, b); 300 break; 301 case 15: 302 s->palette[n] = rgb_to_pixel15(r, g, b); 303 break; 304 case 16: 305 s->palette[n] = rgb_to_pixel16(r, g, b); 306 break; 307 case 24: 308 case 32: 309 s->palette[n] = rgb_to_pixel32(r, g, b); 310 break; 311 } 312 n++; 313 } 314 } 315 316 static void pl110_resize(PL110State *s, int width, int height) 317 { 318 if (width != s->cols || height != s->rows) { 319 if (pl110_enabled(s)) { 320 qemu_console_resize(s->con, width, height); 321 } 322 } 323 s->cols = width; 324 s->rows = height; 325 } 326 327 /* Update interrupts. */ 328 static void pl110_update(PL110State *s) 329 { 330 /* Raise IRQ if enabled and any status bit is 1 */ 331 if (s->int_status & s->int_mask) { 332 qemu_irq_raise(s->irq); 333 } else { 334 qemu_irq_lower(s->irq); 335 } 336 } 337 338 static void pl110_vblank_interrupt(void *opaque) 339 { 340 PL110State *s = opaque; 341 342 /* Fire the vertical compare and next base IRQs and re-arm */ 343 s->int_status |= (PL110_IE_NB | PL110_IE_VC); 344 timer_mod(s->vblank_timer, 345 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 346 NANOSECONDS_PER_SECOND / 60); 347 pl110_update(s); 348 } 349 350 static uint64_t pl110_read(void *opaque, hwaddr offset, 351 unsigned size) 352 { 353 PL110State *s = (PL110State *)opaque; 354 355 if (offset >= 0xfe0 && offset < 0x1000) { 356 return idregs[s->version][(offset - 0xfe0) >> 2]; 357 } 358 if (offset >= 0x200 && offset < 0x400) { 359 return s->raw_palette[(offset - 0x200) >> 2]; 360 } 361 switch (offset >> 2) { 362 case 0: /* LCDTiming0 */ 363 return s->timing[0]; 364 case 1: /* LCDTiming1 */ 365 return s->timing[1]; 366 case 2: /* LCDTiming2 */ 367 return s->timing[2]; 368 case 3: /* LCDTiming3 */ 369 return s->timing[3]; 370 case 4: /* LCDUPBASE */ 371 return s->upbase; 372 case 5: /* LCDLPBASE */ 373 return s->lpbase; 374 case 6: /* LCDIMSC */ 375 if (s->version != PL110) { 376 return s->cr; 377 } 378 return s->int_mask; 379 case 7: /* LCDControl */ 380 if (s->version != PL110) { 381 return s->int_mask; 382 } 383 return s->cr; 384 case 8: /* LCDRIS */ 385 return s->int_status; 386 case 9: /* LCDMIS */ 387 return s->int_status & s->int_mask; 388 case 11: /* LCDUPCURR */ 389 /* TODO: Implement vertical refresh. */ 390 return s->upbase; 391 case 12: /* LCDLPCURR */ 392 return s->lpbase; 393 default: 394 qemu_log_mask(LOG_GUEST_ERROR, 395 "pl110_read: Bad offset %x\n", (int)offset); 396 return 0; 397 } 398 } 399 400 static void pl110_write(void *opaque, hwaddr offset, 401 uint64_t val, unsigned size) 402 { 403 PL110State *s = (PL110State *)opaque; 404 int n; 405 406 /* For simplicity invalidate the display whenever a control register 407 is written to. */ 408 s->invalidate = 1; 409 if (offset >= 0x200 && offset < 0x400) { 410 /* Palette. */ 411 n = (offset - 0x200) >> 2; 412 s->raw_palette[(offset - 0x200) >> 2] = val; 413 pl110_update_palette(s, n); 414 return; 415 } 416 switch (offset >> 2) { 417 case 0: /* LCDTiming0 */ 418 s->timing[0] = val; 419 n = ((val & 0xfc) + 4) * 4; 420 pl110_resize(s, n, s->rows); 421 break; 422 case 1: /* LCDTiming1 */ 423 s->timing[1] = val; 424 n = (val & 0x3ff) + 1; 425 pl110_resize(s, s->cols, n); 426 break; 427 case 2: /* LCDTiming2 */ 428 s->timing[2] = val; 429 break; 430 case 3: /* LCDTiming3 */ 431 s->timing[3] = val; 432 break; 433 case 4: /* LCDUPBASE */ 434 s->upbase = val; 435 break; 436 case 5: /* LCDLPBASE */ 437 s->lpbase = val; 438 break; 439 case 6: /* LCDIMSC */ 440 if (s->version != PL110) { 441 goto control; 442 } 443 imsc: 444 s->int_mask = val; 445 pl110_update(s); 446 break; 447 case 7: /* LCDControl */ 448 if (s->version != PL110) { 449 goto imsc; 450 } 451 control: 452 s->cr = val; 453 s->bpp = (val >> 1) & 7; 454 if (pl110_enabled(s)) { 455 qemu_console_resize(s->con, s->cols, s->rows); 456 timer_mod(s->vblank_timer, 457 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 458 NANOSECONDS_PER_SECOND / 60); 459 } else { 460 timer_del(s->vblank_timer); 461 } 462 break; 463 case 10: /* LCDICR */ 464 s->int_status &= ~val; 465 pl110_update(s); 466 break; 467 default: 468 qemu_log_mask(LOG_GUEST_ERROR, 469 "pl110_write: Bad offset %x\n", (int)offset); 470 } 471 } 472 473 static const MemoryRegionOps pl110_ops = { 474 .read = pl110_read, 475 .write = pl110_write, 476 .endianness = DEVICE_NATIVE_ENDIAN, 477 }; 478 479 static void pl110_mux_ctrl_set(void *opaque, int line, int level) 480 { 481 PL110State *s = (PL110State *)opaque; 482 s->mux_ctrl = level; 483 } 484 485 static int vmstate_pl110_post_load(void *opaque, int version_id) 486 { 487 PL110State *s = opaque; 488 /* Make sure we redraw, and at the right size */ 489 pl110_invalidate_display(s); 490 return 0; 491 } 492 493 static const GraphicHwOps pl110_gfx_ops = { 494 .invalidate = pl110_invalidate_display, 495 .gfx_update = pl110_update_display, 496 }; 497 498 static void pl110_realize(DeviceState *dev, Error **errp) 499 { 500 PL110State *s = PL110(dev); 501 SysBusDevice *sbd = SYS_BUS_DEVICE(dev); 502 503 memory_region_init_io(&s->iomem, OBJECT(s), &pl110_ops, s, "pl110", 0x1000); 504 sysbus_init_mmio(sbd, &s->iomem); 505 sysbus_init_irq(sbd, &s->irq); 506 s->vblank_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, 507 pl110_vblank_interrupt, s); 508 qdev_init_gpio_in(dev, pl110_mux_ctrl_set, 1); 509 s->con = graphic_console_init(dev, 0, &pl110_gfx_ops, s); 510 } 511 512 static void pl110_init(Object *obj) 513 { 514 PL110State *s = PL110(obj); 515 516 s->version = PL110; 517 } 518 519 static void pl110_versatile_init(Object *obj) 520 { 521 PL110State *s = PL110(obj); 522 523 s->version = PL110_VERSATILE; 524 } 525 526 static void pl111_init(Object *obj) 527 { 528 PL110State *s = PL110(obj); 529 530 s->version = PL111; 531 } 532 533 static void pl110_class_init(ObjectClass *klass, void *data) 534 { 535 DeviceClass *dc = DEVICE_CLASS(klass); 536 537 set_bit(DEVICE_CATEGORY_DISPLAY, dc->categories); 538 dc->vmsd = &vmstate_pl110; 539 dc->realize = pl110_realize; 540 } 541 542 static const TypeInfo pl110_info = { 543 .name = TYPE_PL110, 544 .parent = TYPE_SYS_BUS_DEVICE, 545 .instance_size = sizeof(PL110State), 546 .instance_init = pl110_init, 547 .class_init = pl110_class_init, 548 }; 549 550 static const TypeInfo pl110_versatile_info = { 551 .name = "pl110_versatile", 552 .parent = TYPE_PL110, 553 .instance_init = pl110_versatile_init, 554 }; 555 556 static const TypeInfo pl111_info = { 557 .name = "pl111", 558 .parent = TYPE_PL110, 559 .instance_init = pl111_init, 560 }; 561 562 static void pl110_register_types(void) 563 { 564 type_register_static(&pl110_info); 565 type_register_static(&pl110_versatile_info); 566 type_register_static(&pl111_info); 567 } 568 569 type_init(pl110_register_types) 570