1 /* 2 * Arm PrimeCell PL110 Color LCD Controller 3 * 4 * Copyright (c) 2005-2009 CodeSourcery. 5 * Written by Paul Brook 6 * 7 * This code is licensed under the GNU LGPL 8 */ 9 10 #include "hw/sysbus.h" 11 #include "ui/console.h" 12 #include "framebuffer.h" 13 #include "ui/pixel_ops.h" 14 15 #define PL110_CR_EN 0x001 16 #define PL110_CR_BGR 0x100 17 #define PL110_CR_BEBO 0x200 18 #define PL110_CR_BEPO 0x400 19 #define PL110_CR_PWR 0x800 20 21 enum pl110_bppmode 22 { 23 BPP_1, 24 BPP_2, 25 BPP_4, 26 BPP_8, 27 BPP_16, 28 BPP_32, 29 BPP_16_565, /* PL111 only */ 30 BPP_12 /* PL111 only */ 31 }; 32 33 34 /* The Versatile/PB uses a slightly modified PL110 controller. */ 35 enum pl110_version 36 { 37 PL110, 38 PL110_VERSATILE, 39 PL111 40 }; 41 42 typedef struct { 43 SysBusDevice busdev; 44 MemoryRegion iomem; 45 QemuConsole *con; 46 47 int version; 48 uint32_t timing[4]; 49 uint32_t cr; 50 uint32_t upbase; 51 uint32_t lpbase; 52 uint32_t int_status; 53 uint32_t int_mask; 54 int cols; 55 int rows; 56 enum pl110_bppmode bpp; 57 int invalidate; 58 uint32_t mux_ctrl; 59 uint32_t palette[256]; 60 uint32_t raw_palette[128]; 61 qemu_irq irq; 62 } pl110_state; 63 64 static int vmstate_pl110_post_load(void *opaque, int version_id); 65 66 static const VMStateDescription vmstate_pl110 = { 67 .name = "pl110", 68 .version_id = 2, 69 .minimum_version_id = 1, 70 .post_load = vmstate_pl110_post_load, 71 .fields = (VMStateField[]) { 72 VMSTATE_INT32(version, pl110_state), 73 VMSTATE_UINT32_ARRAY(timing, pl110_state, 4), 74 VMSTATE_UINT32(cr, pl110_state), 75 VMSTATE_UINT32(upbase, pl110_state), 76 VMSTATE_UINT32(lpbase, pl110_state), 77 VMSTATE_UINT32(int_status, pl110_state), 78 VMSTATE_UINT32(int_mask, pl110_state), 79 VMSTATE_INT32(cols, pl110_state), 80 VMSTATE_INT32(rows, pl110_state), 81 VMSTATE_UINT32(bpp, pl110_state), 82 VMSTATE_INT32(invalidate, pl110_state), 83 VMSTATE_UINT32_ARRAY(palette, pl110_state, 256), 84 VMSTATE_UINT32_ARRAY(raw_palette, pl110_state, 128), 85 VMSTATE_UINT32_V(mux_ctrl, pl110_state, 2), 86 VMSTATE_END_OF_LIST() 87 } 88 }; 89 90 static const unsigned char pl110_id[] = 91 { 0x10, 0x11, 0x04, 0x00, 0x0d, 0xf0, 0x05, 0xb1 }; 92 93 /* The Arm documentation (DDI0224C) says the CLDC on the Versatile board 94 has a different ID. However Linux only looks for the normal ID. */ 95 #if 0 96 static const unsigned char pl110_versatile_id[] = 97 { 0x93, 0x10, 0x04, 0x00, 0x0d, 0xf0, 0x05, 0xb1 }; 98 #else 99 #define pl110_versatile_id pl110_id 100 #endif 101 102 static const unsigned char pl111_id[] = { 103 0x11, 0x11, 0x24, 0x00, 0x0d, 0xf0, 0x05, 0xb1 104 }; 105 106 /* Indexed by pl110_version */ 107 static const unsigned char *idregs[] = { 108 pl110_id, 109 pl110_versatile_id, 110 pl111_id 111 }; 112 113 #define BITS 8 114 #include "pl110_template.h" 115 #define BITS 15 116 #include "pl110_template.h" 117 #define BITS 16 118 #include "pl110_template.h" 119 #define BITS 24 120 #include "pl110_template.h" 121 #define BITS 32 122 #include "pl110_template.h" 123 124 static int pl110_enabled(pl110_state *s) 125 { 126 return (s->cr & PL110_CR_EN) && (s->cr & PL110_CR_PWR); 127 } 128 129 static void pl110_update_display(void *opaque) 130 { 131 pl110_state *s = (pl110_state *)opaque; 132 DisplaySurface *surface = qemu_console_surface(s->con); 133 drawfn* fntable; 134 drawfn fn; 135 int dest_width; 136 int src_width; 137 int bpp_offset; 138 int first; 139 int last; 140 141 if (!pl110_enabled(s)) 142 return; 143 144 switch (surface_bits_per_pixel(surface)) { 145 case 0: 146 return; 147 case 8: 148 fntable = pl110_draw_fn_8; 149 dest_width = 1; 150 break; 151 case 15: 152 fntable = pl110_draw_fn_15; 153 dest_width = 2; 154 break; 155 case 16: 156 fntable = pl110_draw_fn_16; 157 dest_width = 2; 158 break; 159 case 24: 160 fntable = pl110_draw_fn_24; 161 dest_width = 3; 162 break; 163 case 32: 164 fntable = pl110_draw_fn_32; 165 dest_width = 4; 166 break; 167 default: 168 fprintf(stderr, "pl110: Bad color depth\n"); 169 exit(1); 170 } 171 if (s->cr & PL110_CR_BGR) 172 bpp_offset = 0; 173 else 174 bpp_offset = 24; 175 176 if ((s->version != PL111) && (s->bpp == BPP_16)) { 177 /* The PL110's native 16 bit mode is 5551; however 178 * most boards with a PL110 implement an external 179 * mux which allows bits to be reshuffled to give 180 * 565 format. The mux is typically controlled by 181 * an external system register. 182 * This is controlled by a GPIO input pin 183 * so boards can wire it up to their register. 184 * 185 * The PL111 straightforwardly implements both 186 * 5551 and 565 under control of the bpp field 187 * in the LCDControl register. 188 */ 189 switch (s->mux_ctrl) { 190 case 3: /* 565 BGR */ 191 bpp_offset = (BPP_16_565 - BPP_16); 192 break; 193 case 1: /* 5551 */ 194 break; 195 case 0: /* 888; also if we have loaded vmstate from an old version */ 196 case 2: /* 565 RGB */ 197 default: 198 /* treat as 565 but honour BGR bit */ 199 bpp_offset += (BPP_16_565 - BPP_16); 200 break; 201 } 202 } 203 204 if (s->cr & PL110_CR_BEBO) 205 fn = fntable[s->bpp + 8 + bpp_offset]; 206 else if (s->cr & PL110_CR_BEPO) 207 fn = fntable[s->bpp + 16 + bpp_offset]; 208 else 209 fn = fntable[s->bpp + bpp_offset]; 210 211 src_width = s->cols; 212 switch (s->bpp) { 213 case BPP_1: 214 src_width >>= 3; 215 break; 216 case BPP_2: 217 src_width >>= 2; 218 break; 219 case BPP_4: 220 src_width >>= 1; 221 break; 222 case BPP_8: 223 break; 224 case BPP_16: 225 case BPP_16_565: 226 case BPP_12: 227 src_width <<= 1; 228 break; 229 case BPP_32: 230 src_width <<= 2; 231 break; 232 } 233 dest_width *= s->cols; 234 first = 0; 235 framebuffer_update_display(surface, sysbus_address_space(&s->busdev), 236 s->upbase, s->cols, s->rows, 237 src_width, dest_width, 0, 238 s->invalidate, 239 fn, s->palette, 240 &first, &last); 241 if (first >= 0) { 242 dpy_gfx_update(s->con, 0, first, s->cols, last - first + 1); 243 } 244 s->invalidate = 0; 245 } 246 247 static void pl110_invalidate_display(void * opaque) 248 { 249 pl110_state *s = (pl110_state *)opaque; 250 s->invalidate = 1; 251 if (pl110_enabled(s)) { 252 qemu_console_resize(s->con, s->cols, s->rows); 253 } 254 } 255 256 static void pl110_update_palette(pl110_state *s, int n) 257 { 258 DisplaySurface *surface = qemu_console_surface(s->con); 259 int i; 260 uint32_t raw; 261 unsigned int r, g, b; 262 263 raw = s->raw_palette[n]; 264 n <<= 1; 265 for (i = 0; i < 2; i++) { 266 r = (raw & 0x1f) << 3; 267 raw >>= 5; 268 g = (raw & 0x1f) << 3; 269 raw >>= 5; 270 b = (raw & 0x1f) << 3; 271 /* The I bit is ignored. */ 272 raw >>= 6; 273 switch (surface_bits_per_pixel(surface)) { 274 case 8: 275 s->palette[n] = rgb_to_pixel8(r, g, b); 276 break; 277 case 15: 278 s->palette[n] = rgb_to_pixel15(r, g, b); 279 break; 280 case 16: 281 s->palette[n] = rgb_to_pixel16(r, g, b); 282 break; 283 case 24: 284 case 32: 285 s->palette[n] = rgb_to_pixel32(r, g, b); 286 break; 287 } 288 n++; 289 } 290 } 291 292 static void pl110_resize(pl110_state *s, int width, int height) 293 { 294 if (width != s->cols || height != s->rows) { 295 if (pl110_enabled(s)) { 296 qemu_console_resize(s->con, width, height); 297 } 298 } 299 s->cols = width; 300 s->rows = height; 301 } 302 303 /* Update interrupts. */ 304 static void pl110_update(pl110_state *s) 305 { 306 /* TODO: Implement interrupts. */ 307 } 308 309 static uint64_t pl110_read(void *opaque, hwaddr offset, 310 unsigned size) 311 { 312 pl110_state *s = (pl110_state *)opaque; 313 314 if (offset >= 0xfe0 && offset < 0x1000) { 315 return idregs[s->version][(offset - 0xfe0) >> 2]; 316 } 317 if (offset >= 0x200 && offset < 0x400) { 318 return s->raw_palette[(offset - 0x200) >> 2]; 319 } 320 switch (offset >> 2) { 321 case 0: /* LCDTiming0 */ 322 return s->timing[0]; 323 case 1: /* LCDTiming1 */ 324 return s->timing[1]; 325 case 2: /* LCDTiming2 */ 326 return s->timing[2]; 327 case 3: /* LCDTiming3 */ 328 return s->timing[3]; 329 case 4: /* LCDUPBASE */ 330 return s->upbase; 331 case 5: /* LCDLPBASE */ 332 return s->lpbase; 333 case 6: /* LCDIMSC */ 334 if (s->version != PL110) { 335 return s->cr; 336 } 337 return s->int_mask; 338 case 7: /* LCDControl */ 339 if (s->version != PL110) { 340 return s->int_mask; 341 } 342 return s->cr; 343 case 8: /* LCDRIS */ 344 return s->int_status; 345 case 9: /* LCDMIS */ 346 return s->int_status & s->int_mask; 347 case 11: /* LCDUPCURR */ 348 /* TODO: Implement vertical refresh. */ 349 return s->upbase; 350 case 12: /* LCDLPCURR */ 351 return s->lpbase; 352 default: 353 qemu_log_mask(LOG_GUEST_ERROR, 354 "pl110_read: Bad offset %x\n", (int)offset); 355 return 0; 356 } 357 } 358 359 static void pl110_write(void *opaque, hwaddr offset, 360 uint64_t val, unsigned size) 361 { 362 pl110_state *s = (pl110_state *)opaque; 363 int n; 364 365 /* For simplicity invalidate the display whenever a control register 366 is written to. */ 367 s->invalidate = 1; 368 if (offset >= 0x200 && offset < 0x400) { 369 /* Palette. */ 370 n = (offset - 0x200) >> 2; 371 s->raw_palette[(offset - 0x200) >> 2] = val; 372 pl110_update_palette(s, n); 373 return; 374 } 375 switch (offset >> 2) { 376 case 0: /* LCDTiming0 */ 377 s->timing[0] = val; 378 n = ((val & 0xfc) + 4) * 4; 379 pl110_resize(s, n, s->rows); 380 break; 381 case 1: /* LCDTiming1 */ 382 s->timing[1] = val; 383 n = (val & 0x3ff) + 1; 384 pl110_resize(s, s->cols, n); 385 break; 386 case 2: /* LCDTiming2 */ 387 s->timing[2] = val; 388 break; 389 case 3: /* LCDTiming3 */ 390 s->timing[3] = val; 391 break; 392 case 4: /* LCDUPBASE */ 393 s->upbase = val; 394 break; 395 case 5: /* LCDLPBASE */ 396 s->lpbase = val; 397 break; 398 case 6: /* LCDIMSC */ 399 if (s->version != PL110) { 400 goto control; 401 } 402 imsc: 403 s->int_mask = val; 404 pl110_update(s); 405 break; 406 case 7: /* LCDControl */ 407 if (s->version != PL110) { 408 goto imsc; 409 } 410 control: 411 s->cr = val; 412 s->bpp = (val >> 1) & 7; 413 if (pl110_enabled(s)) { 414 qemu_console_resize(s->con, s->cols, s->rows); 415 } 416 break; 417 case 10: /* LCDICR */ 418 s->int_status &= ~val; 419 pl110_update(s); 420 break; 421 default: 422 qemu_log_mask(LOG_GUEST_ERROR, 423 "pl110_write: Bad offset %x\n", (int)offset); 424 } 425 } 426 427 static const MemoryRegionOps pl110_ops = { 428 .read = pl110_read, 429 .write = pl110_write, 430 .endianness = DEVICE_NATIVE_ENDIAN, 431 }; 432 433 static void pl110_mux_ctrl_set(void *opaque, int line, int level) 434 { 435 pl110_state *s = (pl110_state *)opaque; 436 s->mux_ctrl = level; 437 } 438 439 static int vmstate_pl110_post_load(void *opaque, int version_id) 440 { 441 pl110_state *s = opaque; 442 /* Make sure we redraw, and at the right size */ 443 pl110_invalidate_display(s); 444 return 0; 445 } 446 447 static const GraphicHwOps pl110_gfx_ops = { 448 .invalidate = pl110_invalidate_display, 449 .gfx_update = pl110_update_display, 450 }; 451 452 static int pl110_init(SysBusDevice *dev) 453 { 454 pl110_state *s = FROM_SYSBUS(pl110_state, dev); 455 456 memory_region_init_io(&s->iomem, &pl110_ops, s, "pl110", 0x1000); 457 sysbus_init_mmio(dev, &s->iomem); 458 sysbus_init_irq(dev, &s->irq); 459 qdev_init_gpio_in(&s->busdev.qdev, pl110_mux_ctrl_set, 1); 460 s->con = graphic_console_init(&pl110_gfx_ops, s); 461 return 0; 462 } 463 464 static int pl110_versatile_init(SysBusDevice *dev) 465 { 466 pl110_state *s = FROM_SYSBUS(pl110_state, dev); 467 s->version = PL110_VERSATILE; 468 return pl110_init(dev); 469 } 470 471 static int pl111_init(SysBusDevice *dev) 472 { 473 pl110_state *s = FROM_SYSBUS(pl110_state, dev); 474 s->version = PL111; 475 return pl110_init(dev); 476 } 477 478 static void pl110_class_init(ObjectClass *klass, void *data) 479 { 480 DeviceClass *dc = DEVICE_CLASS(klass); 481 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); 482 483 k->init = pl110_init; 484 dc->no_user = 1; 485 dc->vmsd = &vmstate_pl110; 486 } 487 488 static const TypeInfo pl110_info = { 489 .name = "pl110", 490 .parent = TYPE_SYS_BUS_DEVICE, 491 .instance_size = sizeof(pl110_state), 492 .class_init = pl110_class_init, 493 }; 494 495 static void pl110_versatile_class_init(ObjectClass *klass, void *data) 496 { 497 DeviceClass *dc = DEVICE_CLASS(klass); 498 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); 499 500 k->init = pl110_versatile_init; 501 dc->no_user = 1; 502 dc->vmsd = &vmstate_pl110; 503 } 504 505 static const TypeInfo pl110_versatile_info = { 506 .name = "pl110_versatile", 507 .parent = TYPE_SYS_BUS_DEVICE, 508 .instance_size = sizeof(pl110_state), 509 .class_init = pl110_versatile_class_init, 510 }; 511 512 static void pl111_class_init(ObjectClass *klass, void *data) 513 { 514 DeviceClass *dc = DEVICE_CLASS(klass); 515 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); 516 517 k->init = pl111_init; 518 dc->no_user = 1; 519 dc->vmsd = &vmstate_pl110; 520 } 521 522 static const TypeInfo pl111_info = { 523 .name = "pl111", 524 .parent = TYPE_SYS_BUS_DEVICE, 525 .instance_size = sizeof(pl110_state), 526 .class_init = pl111_class_init, 527 }; 528 529 static void pl110_register_types(void) 530 { 531 type_register_static(&pl110_info); 532 type_register_static(&pl110_versatile_info); 533 type_register_static(&pl111_info); 534 } 535 536 type_init(pl110_register_types) 537