xref: /openbmc/qemu/hw/cris/axis_dev88.c (revision 354908ce)
1 /*
2  * QEMU model for the AXIS devboard 88.
3  *
4  * Copyright (c) 2009 Edgar E. Iglesias, Axis Communications AB.
5  *
6  * Permission is hereby granted, free of charge, to any person obtaining a copy
7  * of this software and associated documentation files (the "Software"), to deal
8  * in the Software without restriction, including without limitation the rights
9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10  * copies of the Software, and to permit persons to whom the Software is
11  * furnished to do so, subject to the following conditions:
12  *
13  * The above copyright notice and this permission notice shall be included in
14  * all copies or substantial portions of the Software.
15  *
16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22  * THE SOFTWARE.
23  */
24 
25 #include "qemu/osdep.h"
26 #include "qemu/units.h"
27 #include "qapi/error.h"
28 #include "cpu.h"
29 #include "hw/sysbus.h"
30 #include "net/net.h"
31 #include "hw/block/flash.h"
32 #include "hw/boards.h"
33 #include "hw/cris/etraxfs.h"
34 #include "hw/loader.h"
35 #include "elf.h"
36 #include "boot.h"
37 #include "exec/address-spaces.h"
38 #include "sysemu/qtest.h"
39 #include "sysemu/sysemu.h"
40 
41 #define D(x)
42 #define DNAND(x)
43 
44 struct nand_state_t
45 {
46     DeviceState *nand;
47     MemoryRegion iomem;
48     unsigned int rdy:1;
49     unsigned int ale:1;
50     unsigned int cle:1;
51     unsigned int ce:1;
52 };
53 
54 static struct nand_state_t nand_state;
55 static uint64_t nand_read(void *opaque, hwaddr addr, unsigned size)
56 {
57     struct nand_state_t *s = opaque;
58     uint32_t r;
59     int rdy;
60 
61     r = nand_getio(s->nand);
62     nand_getpins(s->nand, &rdy);
63     s->rdy = rdy;
64 
65     DNAND(printf("%s addr=%x r=%x\n", __func__, addr, r));
66     return r;
67 }
68 
69 static void
70 nand_write(void *opaque, hwaddr addr, uint64_t value,
71            unsigned size)
72 {
73     struct nand_state_t *s = opaque;
74     int rdy;
75 
76     DNAND(printf("%s addr=%x v=%x\n", __func__, addr, (unsigned)value));
77     nand_setpins(s->nand, s->cle, s->ale, s->ce, 1, 0);
78     nand_setio(s->nand, value);
79     nand_getpins(s->nand, &rdy);
80     s->rdy = rdy;
81 }
82 
83 static const MemoryRegionOps nand_ops = {
84     .read = nand_read,
85     .write = nand_write,
86     .endianness = DEVICE_NATIVE_ENDIAN,
87 };
88 
89 struct tempsensor_t
90 {
91     unsigned int shiftreg;
92     unsigned int count;
93     enum {
94         ST_OUT, ST_IN, ST_Z
95     } state;
96 
97     uint16_t regs[3];
98 };
99 
100 static void tempsensor_clkedge(struct tempsensor_t *s,
101                                unsigned int clk, unsigned int data_in)
102 {
103     D(printf("%s clk=%d state=%d sr=%x\n", __func__,
104              clk, s->state, s->shiftreg));
105     if (s->count == 0) {
106         s->count = 16;
107         s->state = ST_OUT;
108     }
109     switch (s->state) {
110         case ST_OUT:
111             /* Output reg is clocked at negedge.  */
112             if (!clk) {
113                 s->count--;
114                 s->shiftreg <<= 1;
115                 if (s->count == 0) {
116                     s->shiftreg = 0;
117                     s->state = ST_IN;
118                     s->count = 16;
119                 }
120             }
121             break;
122         case ST_Z:
123             if (clk) {
124                 s->count--;
125                 if (s->count == 0) {
126                     s->shiftreg = 0;
127                     s->state = ST_OUT;
128                     s->count = 16;
129                 }
130             }
131             break;
132         case ST_IN:
133             /* Indata is sampled at posedge.  */
134             if (clk) {
135                 s->count--;
136                 s->shiftreg <<= 1;
137                 s->shiftreg |= data_in & 1;
138                 if (s->count == 0) {
139                     D(printf("%s cfgreg=%x\n", __func__, s->shiftreg));
140                     s->regs[0] = s->shiftreg;
141                     s->state = ST_OUT;
142                     s->count = 16;
143 
144                     if ((s->regs[0] & 0xff) == 0) {
145                         /* 25 degrees celsius.  */
146                         s->shiftreg = 0x0b9f;
147                     } else if ((s->regs[0] & 0xff) == 0xff) {
148                         /* Sensor ID, 0x8100 LM70.  */
149                         s->shiftreg = 0x8100;
150                     } else
151                         printf("Invalid tempsens state %x\n", s->regs[0]);
152                 }
153             }
154             break;
155     }
156 }
157 
158 
159 #define RW_PA_DOUT    0x00
160 #define R_PA_DIN      0x01
161 #define RW_PA_OE      0x02
162 #define RW_PD_DOUT    0x10
163 #define R_PD_DIN      0x11
164 #define RW_PD_OE      0x12
165 
166 static struct gpio_state_t
167 {
168     MemoryRegion iomem;
169     struct nand_state_t *nand;
170     struct tempsensor_t tempsensor;
171     uint32_t regs[0x5c / 4];
172 } gpio_state;
173 
174 static uint64_t gpio_read(void *opaque, hwaddr addr, unsigned size)
175 {
176     struct gpio_state_t *s = opaque;
177     uint32_t r = 0;
178 
179     addr >>= 2;
180     switch (addr)
181     {
182         case R_PA_DIN:
183             r = s->regs[RW_PA_DOUT] & s->regs[RW_PA_OE];
184 
185             /* Encode pins from the nand.  */
186             r |= s->nand->rdy << 7;
187             break;
188         case R_PD_DIN:
189             r = s->regs[RW_PD_DOUT] & s->regs[RW_PD_OE];
190 
191             /* Encode temp sensor pins.  */
192             r |= (!!(s->tempsensor.shiftreg & 0x10000)) << 4;
193             break;
194 
195         default:
196             r = s->regs[addr];
197             break;
198     }
199     return r;
200     D(printf("%s %x=%x\n", __func__, addr, r));
201 }
202 
203 static void gpio_write(void *opaque, hwaddr addr, uint64_t value,
204                        unsigned size)
205 {
206     struct gpio_state_t *s = opaque;
207     D(printf("%s %x=%x\n", __func__, addr, (unsigned)value));
208 
209     addr >>= 2;
210     switch (addr)
211     {
212         case RW_PA_DOUT:
213             /* Decode nand pins.  */
214             s->nand->ale = !!(value & (1 << 6));
215             s->nand->cle = !!(value & (1 << 5));
216             s->nand->ce  = !!(value & (1 << 4));
217 
218             s->regs[addr] = value;
219             break;
220 
221         case RW_PD_DOUT:
222             /* Temp sensor clk.  */
223             if ((s->regs[addr] ^ value) & 2)
224                 tempsensor_clkedge(&s->tempsensor, !!(value & 2),
225                                    !!(value & 16));
226             s->regs[addr] = value;
227             break;
228 
229         default:
230             s->regs[addr] = value;
231             break;
232     }
233 }
234 
235 static const MemoryRegionOps gpio_ops = {
236     .read = gpio_read,
237     .write = gpio_write,
238     .endianness = DEVICE_NATIVE_ENDIAN,
239     .valid = {
240         .min_access_size = 4,
241         .max_access_size = 4,
242     },
243 };
244 
245 #define INTMEM_SIZE (128 * KiB)
246 
247 static struct cris_load_info li;
248 
249 static
250 void axisdev88_init(MachineState *machine)
251 {
252     const char *kernel_filename = machine->kernel_filename;
253     const char *kernel_cmdline = machine->kernel_cmdline;
254     CRISCPU *cpu;
255     DeviceState *dev;
256     SysBusDevice *s;
257     DriveInfo *nand;
258     qemu_irq irq[30], nmi[2];
259     void *etraxfs_dmac;
260     struct etraxfs_dma_client *dma_eth;
261     int i;
262     MemoryRegion *address_space_mem = get_system_memory();
263     MemoryRegion *phys_intmem = g_new(MemoryRegion, 1);
264 
265     /* init CPUs */
266     cpu = CRIS_CPU(cpu_create(machine->cpu_type));
267 
268     memory_region_add_subregion(address_space_mem, 0x40000000, machine->ram);
269 
270     /* The ETRAX-FS has 128Kb on chip ram, the docs refer to it as the
271        internal memory.  */
272     memory_region_init_ram(phys_intmem, NULL, "axisdev88.chipram",
273                            INTMEM_SIZE, &error_fatal);
274     memory_region_add_subregion(address_space_mem, 0x38000000, phys_intmem);
275 
276       /* Attach a NAND flash to CS1.  */
277     nand = drive_get(IF_MTD, 0, 0);
278     nand_state.nand = nand_init(nand ? blk_by_legacy_dinfo(nand) : NULL,
279                                 NAND_MFR_STMICRO, 0x39);
280     memory_region_init_io(&nand_state.iomem, NULL, &nand_ops, &nand_state,
281                           "nand", 0x05000000);
282     memory_region_add_subregion(address_space_mem, 0x10000000,
283                                 &nand_state.iomem);
284 
285     gpio_state.nand = &nand_state;
286     memory_region_init_io(&gpio_state.iomem, NULL, &gpio_ops, &gpio_state,
287                           "gpio", 0x5c);
288     memory_region_add_subregion(address_space_mem, 0x3001a000,
289                                 &gpio_state.iomem);
290 
291 
292     dev = qdev_new("etraxfs,pic");
293     s = SYS_BUS_DEVICE(dev);
294     sysbus_realize_and_unref(s, &error_fatal);
295     sysbus_mmio_map(s, 0, 0x3001c000);
296     sysbus_connect_irq(s, 0, qdev_get_gpio_in(DEVICE(cpu), CRIS_CPU_IRQ));
297     sysbus_connect_irq(s, 1, qdev_get_gpio_in(DEVICE(cpu), CRIS_CPU_NMI));
298     for (i = 0; i < 30; i++) {
299         irq[i] = qdev_get_gpio_in(dev, i);
300     }
301     nmi[0] = qdev_get_gpio_in(dev, 30);
302     nmi[1] = qdev_get_gpio_in(dev, 31);
303 
304     etraxfs_dmac = etraxfs_dmac_init(0x30000000, 10);
305     for (i = 0; i < 10; i++) {
306         /* On ETRAX, odd numbered channels are inputs.  */
307         etraxfs_dmac_connect(etraxfs_dmac, i, irq + 7 + i, i & 1);
308     }
309 
310     /* Add the two ethernet blocks.  */
311     dma_eth = g_malloc0(sizeof dma_eth[0] * 4); /* Allocate 4 channels.  */
312     etraxfs_eth_init(&nd_table[0], 0x30034000, 1, &dma_eth[0], &dma_eth[1]);
313     if (nb_nics > 1) {
314         etraxfs_eth_init(&nd_table[1], 0x30036000, 2, &dma_eth[2], &dma_eth[3]);
315     }
316 
317     /* The DMA Connector block is missing, hardwire things for now.  */
318     etraxfs_dmac_connect_client(etraxfs_dmac, 0, &dma_eth[0]);
319     etraxfs_dmac_connect_client(etraxfs_dmac, 1, &dma_eth[1]);
320     if (nb_nics > 1) {
321         etraxfs_dmac_connect_client(etraxfs_dmac, 6, &dma_eth[2]);
322         etraxfs_dmac_connect_client(etraxfs_dmac, 7, &dma_eth[3]);
323     }
324 
325     /* 2 timers.  */
326     sysbus_create_varargs("etraxfs,timer", 0x3001e000, irq[0x1b], nmi[1], NULL);
327     sysbus_create_varargs("etraxfs,timer", 0x3005e000, irq[0x1b], nmi[1], NULL);
328 
329     for (i = 0; i < 4; i++) {
330         etraxfs_ser_create(0x30026000 + i * 0x2000, irq[0x14 + i], serial_hd(i));
331     }
332 
333     if (kernel_filename) {
334         li.image_filename = kernel_filename;
335         li.cmdline = kernel_cmdline;
336         cris_load_image(cpu, &li);
337     } else if (!qtest_enabled()) {
338         fprintf(stderr, "Kernel image must be specified\n");
339         exit(1);
340     }
341 }
342 
343 static void axisdev88_machine_init(MachineClass *mc)
344 {
345     mc->desc = "AXIS devboard 88";
346     mc->init = axisdev88_init;
347     mc->is_default = true;
348     mc->default_cpu_type = CRIS_CPU_TYPE_NAME("crisv32");
349     mc->default_ram_id = "axisdev88.ram";
350 }
351 
352 DEFINE_MACHINE("axis-dev88", axisdev88_machine_init)
353