1 /* 2 * ARM11MPCore internal peripheral emulation. 3 * 4 * Copyright (c) 2006-2007 CodeSourcery. 5 * Written by Paul Brook 6 * 7 * This code is licensed under the GPL. 8 */ 9 10 #include "qemu/osdep.h" 11 #include "qapi/error.h" 12 #include "qemu/module.h" 13 #include "hw/cpu/arm11mpcore.h" 14 #include "hw/intc/realview_gic.h" 15 #include "hw/irq.h" 16 #include "hw/qdev-properties.h" 17 18 #define ARM11MPCORE_NUM_GIC_PRIORITY_BITS 4 19 20 static void mpcore_priv_set_irq(void *opaque, int irq, int level) 21 { 22 ARM11MPCorePriveState *s = (ARM11MPCorePriveState *)opaque; 23 24 qemu_set_irq(qdev_get_gpio_in(DEVICE(&s->gic), irq), level); 25 } 26 27 static void mpcore_priv_map_setup(ARM11MPCorePriveState *s) 28 { 29 int i; 30 SysBusDevice *scubusdev = SYS_BUS_DEVICE(&s->scu); 31 DeviceState *gicdev = DEVICE(&s->gic); 32 SysBusDevice *gicbusdev = SYS_BUS_DEVICE(&s->gic); 33 SysBusDevice *timerbusdev = SYS_BUS_DEVICE(&s->mptimer); 34 SysBusDevice *wdtbusdev = SYS_BUS_DEVICE(&s->wdtimer); 35 36 memory_region_add_subregion(&s->container, 0, 37 sysbus_mmio_get_region(scubusdev, 0)); 38 /* GIC CPU interfaces: "current CPU" at 0x100, then specific CPUs 39 * at 0x200, 0x300... 40 */ 41 for (i = 0; i < (s->num_cpu + 1); i++) { 42 hwaddr offset = 0x100 + (i * 0x100); 43 memory_region_add_subregion(&s->container, offset, 44 sysbus_mmio_get_region(gicbusdev, i + 1)); 45 } 46 /* Add the regions for timer and watchdog for "current CPU" and 47 * for each specific CPU. 48 */ 49 for (i = 0; i < (s->num_cpu + 1); i++) { 50 /* Timers at 0x600, 0x700, ...; watchdogs at 0x620, 0x720, ... */ 51 hwaddr offset = 0x600 + i * 0x100; 52 memory_region_add_subregion(&s->container, offset, 53 sysbus_mmio_get_region(timerbusdev, i)); 54 memory_region_add_subregion(&s->container, offset + 0x20, 55 sysbus_mmio_get_region(wdtbusdev, i)); 56 } 57 memory_region_add_subregion(&s->container, 0x1000, 58 sysbus_mmio_get_region(gicbusdev, 0)); 59 /* Wire up the interrupt from each watchdog and timer. 60 * For each core the timer is PPI 29 and the watchdog PPI 30. 61 */ 62 for (i = 0; i < s->num_cpu; i++) { 63 int ppibase = (s->num_irq - 32) + i * 32; 64 sysbus_connect_irq(timerbusdev, i, 65 qdev_get_gpio_in(gicdev, ppibase + 29)); 66 sysbus_connect_irq(wdtbusdev, i, 67 qdev_get_gpio_in(gicdev, ppibase + 30)); 68 } 69 } 70 71 static void mpcore_priv_realize(DeviceState *dev, Error **errp) 72 { 73 SysBusDevice *sbd = SYS_BUS_DEVICE(dev); 74 ARM11MPCorePriveState *s = ARM11MPCORE_PRIV(dev); 75 DeviceState *scudev = DEVICE(&s->scu); 76 DeviceState *gicdev = DEVICE(&s->gic); 77 DeviceState *mptimerdev = DEVICE(&s->mptimer); 78 DeviceState *wdtimerdev = DEVICE(&s->wdtimer); 79 Error *err = NULL; 80 81 qdev_prop_set_uint32(scudev, "num-cpu", s->num_cpu); 82 object_property_set_bool(OBJECT(&s->scu), true, "realized", &err); 83 if (err != NULL) { 84 error_propagate(errp, err); 85 return; 86 } 87 88 qdev_prop_set_uint32(gicdev, "num-cpu", s->num_cpu); 89 qdev_prop_set_uint32(gicdev, "num-irq", s->num_irq); 90 qdev_prop_set_uint32(gicdev, "num-priority-bits", 91 ARM11MPCORE_NUM_GIC_PRIORITY_BITS); 92 93 94 object_property_set_bool(OBJECT(&s->gic), true, "realized", &err); 95 if (err != NULL) { 96 error_propagate(errp, err); 97 return; 98 } 99 100 /* Pass through outbound IRQ lines from the GIC */ 101 sysbus_pass_irq(sbd, SYS_BUS_DEVICE(&s->gic)); 102 103 /* Pass through inbound GPIO lines to the GIC */ 104 qdev_init_gpio_in(dev, mpcore_priv_set_irq, s->num_irq - 32); 105 106 qdev_prop_set_uint32(mptimerdev, "num-cpu", s->num_cpu); 107 object_property_set_bool(OBJECT(&s->mptimer), true, "realized", &err); 108 if (err != NULL) { 109 error_propagate(errp, err); 110 return; 111 } 112 113 qdev_prop_set_uint32(wdtimerdev, "num-cpu", s->num_cpu); 114 object_property_set_bool(OBJECT(&s->wdtimer), true, "realized", &err); 115 if (err != NULL) { 116 error_propagate(errp, err); 117 return; 118 } 119 120 mpcore_priv_map_setup(s); 121 } 122 123 static void mpcore_priv_initfn(Object *obj) 124 { 125 SysBusDevice *sbd = SYS_BUS_DEVICE(obj); 126 ARM11MPCorePriveState *s = ARM11MPCORE_PRIV(obj); 127 128 memory_region_init(&s->container, OBJECT(s), 129 "mpcore-priv-container", 0x2000); 130 sysbus_init_mmio(sbd, &s->container); 131 132 sysbus_init_child_obj(obj, "scu", &s->scu, sizeof(s->scu), TYPE_ARM11_SCU); 133 134 sysbus_init_child_obj(obj, "gic", &s->gic, sizeof(s->gic), TYPE_ARM_GIC); 135 /* Request the legacy 11MPCore GIC behaviour: */ 136 qdev_prop_set_uint32(DEVICE(&s->gic), "revision", 0); 137 138 sysbus_init_child_obj(obj, "mptimer", &s->mptimer, sizeof(s->mptimer), 139 TYPE_ARM_MPTIMER); 140 141 sysbus_init_child_obj(obj, "wdtimer", &s->wdtimer, sizeof(s->wdtimer), 142 TYPE_ARM_MPTIMER); 143 } 144 145 static Property mpcore_priv_properties[] = { 146 DEFINE_PROP_UINT32("num-cpu", ARM11MPCorePriveState, num_cpu, 1), 147 /* The ARM11 MPCORE TRM says the on-chip controller may have 148 * anything from 0 to 224 external interrupt IRQ lines (with another 149 * 32 internal). We default to 32+32, which is the number provided by 150 * the ARM11 MPCore test chip in the Realview Versatile Express 151 * coretile. Other boards may differ and should set this property 152 * appropriately. Some Linux kernels may not boot if the hardware 153 * has more IRQ lines than the kernel expects. 154 */ 155 DEFINE_PROP_UINT32("num-irq", ARM11MPCorePriveState, num_irq, 64), 156 DEFINE_PROP_END_OF_LIST(), 157 }; 158 159 static void mpcore_priv_class_init(ObjectClass *klass, void *data) 160 { 161 DeviceClass *dc = DEVICE_CLASS(klass); 162 163 dc->realize = mpcore_priv_realize; 164 device_class_set_props(dc, mpcore_priv_properties); 165 } 166 167 static const TypeInfo mpcore_priv_info = { 168 .name = TYPE_ARM11MPCORE_PRIV, 169 .parent = TYPE_SYS_BUS_DEVICE, 170 .instance_size = sizeof(ARM11MPCorePriveState), 171 .instance_init = mpcore_priv_initfn, 172 .class_init = mpcore_priv_class_init, 173 }; 174 175 static void arm11mpcore_register_types(void) 176 { 177 type_register_static(&mpcore_priv_info); 178 } 179 180 type_init(arm11mpcore_register_types) 181