1 /* 2 * ARM11MPCore internal peripheral emulation. 3 * 4 * Copyright (c) 2006-2007 CodeSourcery. 5 * Written by Paul Brook 6 * 7 * This code is licensed under the GPL. 8 */ 9 10 #include "qemu/osdep.h" 11 #include "qapi/error.h" 12 #include "hw/cpu/arm11mpcore.h" 13 #include "hw/intc/realview_gic.h" 14 15 16 static void mpcore_priv_set_irq(void *opaque, int irq, int level) 17 { 18 ARM11MPCorePriveState *s = (ARM11MPCorePriveState *)opaque; 19 20 qemu_set_irq(qdev_get_gpio_in(DEVICE(&s->gic), irq), level); 21 } 22 23 static void mpcore_priv_map_setup(ARM11MPCorePriveState *s) 24 { 25 int i; 26 SysBusDevice *scubusdev = SYS_BUS_DEVICE(&s->scu); 27 DeviceState *gicdev = DEVICE(&s->gic); 28 SysBusDevice *gicbusdev = SYS_BUS_DEVICE(&s->gic); 29 SysBusDevice *timerbusdev = SYS_BUS_DEVICE(&s->mptimer); 30 SysBusDevice *wdtbusdev = SYS_BUS_DEVICE(&s->wdtimer); 31 32 memory_region_add_subregion(&s->container, 0, 33 sysbus_mmio_get_region(scubusdev, 0)); 34 /* GIC CPU interfaces: "current CPU" at 0x100, then specific CPUs 35 * at 0x200, 0x300... 36 */ 37 for (i = 0; i < (s->num_cpu + 1); i++) { 38 hwaddr offset = 0x100 + (i * 0x100); 39 memory_region_add_subregion(&s->container, offset, 40 sysbus_mmio_get_region(gicbusdev, i + 1)); 41 } 42 /* Add the regions for timer and watchdog for "current CPU" and 43 * for each specific CPU. 44 */ 45 for (i = 0; i < (s->num_cpu + 1); i++) { 46 /* Timers at 0x600, 0x700, ...; watchdogs at 0x620, 0x720, ... */ 47 hwaddr offset = 0x600 + i * 0x100; 48 memory_region_add_subregion(&s->container, offset, 49 sysbus_mmio_get_region(timerbusdev, i)); 50 memory_region_add_subregion(&s->container, offset + 0x20, 51 sysbus_mmio_get_region(wdtbusdev, i)); 52 } 53 memory_region_add_subregion(&s->container, 0x1000, 54 sysbus_mmio_get_region(gicbusdev, 0)); 55 /* Wire up the interrupt from each watchdog and timer. 56 * For each core the timer is PPI 29 and the watchdog PPI 30. 57 */ 58 for (i = 0; i < s->num_cpu; i++) { 59 int ppibase = (s->num_irq - 32) + i * 32; 60 sysbus_connect_irq(timerbusdev, i, 61 qdev_get_gpio_in(gicdev, ppibase + 29)); 62 sysbus_connect_irq(wdtbusdev, i, 63 qdev_get_gpio_in(gicdev, ppibase + 30)); 64 } 65 } 66 67 static void mpcore_priv_realize(DeviceState *dev, Error **errp) 68 { 69 SysBusDevice *sbd = SYS_BUS_DEVICE(dev); 70 ARM11MPCorePriveState *s = ARM11MPCORE_PRIV(dev); 71 DeviceState *scudev = DEVICE(&s->scu); 72 DeviceState *gicdev = DEVICE(&s->gic); 73 DeviceState *mptimerdev = DEVICE(&s->mptimer); 74 DeviceState *wdtimerdev = DEVICE(&s->wdtimer); 75 Error *err = NULL; 76 77 qdev_prop_set_uint32(scudev, "num-cpu", s->num_cpu); 78 object_property_set_bool(OBJECT(&s->scu), true, "realized", &err); 79 if (err != NULL) { 80 error_propagate(errp, err); 81 return; 82 } 83 84 qdev_prop_set_uint32(gicdev, "num-cpu", s->num_cpu); 85 qdev_prop_set_uint32(gicdev, "num-irq", s->num_irq); 86 object_property_set_bool(OBJECT(&s->gic), true, "realized", &err); 87 if (err != NULL) { 88 error_propagate(errp, err); 89 return; 90 } 91 92 /* Pass through outbound IRQ lines from the GIC */ 93 sysbus_pass_irq(sbd, SYS_BUS_DEVICE(&s->gic)); 94 95 /* Pass through inbound GPIO lines to the GIC */ 96 qdev_init_gpio_in(dev, mpcore_priv_set_irq, s->num_irq - 32); 97 98 qdev_prop_set_uint32(mptimerdev, "num-cpu", s->num_cpu); 99 object_property_set_bool(OBJECT(&s->mptimer), true, "realized", &err); 100 if (err != NULL) { 101 error_propagate(errp, err); 102 return; 103 } 104 105 qdev_prop_set_uint32(wdtimerdev, "num-cpu", s->num_cpu); 106 object_property_set_bool(OBJECT(&s->wdtimer), true, "realized", &err); 107 if (err != NULL) { 108 error_propagate(errp, err); 109 return; 110 } 111 112 mpcore_priv_map_setup(s); 113 } 114 115 static void mpcore_priv_initfn(Object *obj) 116 { 117 SysBusDevice *sbd = SYS_BUS_DEVICE(obj); 118 ARM11MPCorePriveState *s = ARM11MPCORE_PRIV(obj); 119 120 memory_region_init(&s->container, OBJECT(s), 121 "mpcore-priv-container", 0x2000); 122 sysbus_init_mmio(sbd, &s->container); 123 124 sysbus_init_child_obj(obj, "scu", &s->scu, sizeof(s->scu), TYPE_ARM11_SCU); 125 126 sysbus_init_child_obj(obj, "gic", &s->gic, sizeof(s->gic), TYPE_ARM_GIC); 127 /* Request the legacy 11MPCore GIC behaviour: */ 128 qdev_prop_set_uint32(DEVICE(&s->gic), "revision", 0); 129 130 sysbus_init_child_obj(obj, "mptimer", &s->mptimer, sizeof(s->mptimer), 131 TYPE_ARM_MPTIMER); 132 133 sysbus_init_child_obj(obj, "wdtimer", &s->wdtimer, sizeof(s->wdtimer), 134 TYPE_ARM_MPTIMER); 135 } 136 137 static Property mpcore_priv_properties[] = { 138 DEFINE_PROP_UINT32("num-cpu", ARM11MPCorePriveState, num_cpu, 1), 139 /* The ARM11 MPCORE TRM says the on-chip controller may have 140 * anything from 0 to 224 external interrupt IRQ lines (with another 141 * 32 internal). We default to 32+32, which is the number provided by 142 * the ARM11 MPCore test chip in the Realview Versatile Express 143 * coretile. Other boards may differ and should set this property 144 * appropriately. Some Linux kernels may not boot if the hardware 145 * has more IRQ lines than the kernel expects. 146 */ 147 DEFINE_PROP_UINT32("num-irq", ARM11MPCorePriveState, num_irq, 64), 148 DEFINE_PROP_END_OF_LIST(), 149 }; 150 151 static void mpcore_priv_class_init(ObjectClass *klass, void *data) 152 { 153 DeviceClass *dc = DEVICE_CLASS(klass); 154 155 dc->realize = mpcore_priv_realize; 156 dc->props = mpcore_priv_properties; 157 } 158 159 static const TypeInfo mpcore_priv_info = { 160 .name = TYPE_ARM11MPCORE_PRIV, 161 .parent = TYPE_SYS_BUS_DEVICE, 162 .instance_size = sizeof(ARM11MPCorePriveState), 163 .instance_init = mpcore_priv_initfn, 164 .class_init = mpcore_priv_class_init, 165 }; 166 167 static void arm11mpcore_register_types(void) 168 { 169 type_register_static(&mpcore_priv_info); 170 } 171 172 type_init(arm11mpcore_register_types) 173