xref: /openbmc/qemu/hw/char/sifive_uart.c (revision 327d4b7f)
1 /*
2  * QEMU model of the UART on the SiFive E300 and U500 series SOCs.
3  *
4  * Copyright (c) 2016 Stefan O'Rear
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms and conditions of the GNU General Public License,
8  * version 2 or later, as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope it will be useful, but WITHOUT
11  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13  * more details.
14  *
15  * You should have received a copy of the GNU General Public License along with
16  * this program.  If not, see <http://www.gnu.org/licenses/>.
17  */
18 
19 #include "qemu/osdep.h"
20 #include "qapi/error.h"
21 #include "qemu/log.h"
22 #include "migration/vmstate.h"
23 #include "chardev/char.h"
24 #include "chardev/char-fe.h"
25 #include "hw/irq.h"
26 #include "hw/char/sifive_uart.h"
27 #include "hw/qdev-properties-system.h"
28 
29 /*
30  * Not yet implemented:
31  *
32  * Transmit FIFO using "qemu/fifo8.h"
33  */
34 
35 /* Returns the state of the IP (interrupt pending) register */
36 static uint64_t sifive_uart_ip(SiFiveUARTState *s)
37 {
38     uint64_t ret = 0;
39 
40     uint64_t txcnt = SIFIVE_UART_GET_TXCNT(s->txctrl);
41     uint64_t rxcnt = SIFIVE_UART_GET_RXCNT(s->rxctrl);
42 
43     if (txcnt != 0) {
44         ret |= SIFIVE_UART_IP_TXWM;
45     }
46     if (s->rx_fifo_len > rxcnt) {
47         ret |= SIFIVE_UART_IP_RXWM;
48     }
49 
50     return ret;
51 }
52 
53 static void sifive_uart_update_irq(SiFiveUARTState *s)
54 {
55     int cond = 0;
56     if ((s->ie & SIFIVE_UART_IE_TXWM) ||
57         ((s->ie & SIFIVE_UART_IE_RXWM) && s->rx_fifo_len)) {
58         cond = 1;
59     }
60     if (cond) {
61         qemu_irq_raise(s->irq);
62     } else {
63         qemu_irq_lower(s->irq);
64     }
65 }
66 
67 static uint64_t
68 sifive_uart_read(void *opaque, hwaddr addr, unsigned int size)
69 {
70     SiFiveUARTState *s = opaque;
71     unsigned char r;
72     switch (addr) {
73     case SIFIVE_UART_RXFIFO:
74         if (s->rx_fifo_len) {
75             r = s->rx_fifo[0];
76             memmove(s->rx_fifo, s->rx_fifo + 1, s->rx_fifo_len - 1);
77             s->rx_fifo_len--;
78             qemu_chr_fe_accept_input(&s->chr);
79             sifive_uart_update_irq(s);
80             return r;
81         }
82         return 0x80000000;
83 
84     case SIFIVE_UART_TXFIFO:
85         return 0; /* Should check tx fifo */
86     case SIFIVE_UART_IE:
87         return s->ie;
88     case SIFIVE_UART_IP:
89         return sifive_uart_ip(s);
90     case SIFIVE_UART_TXCTRL:
91         return s->txctrl;
92     case SIFIVE_UART_RXCTRL:
93         return s->rxctrl;
94     case SIFIVE_UART_DIV:
95         return s->div;
96     }
97 
98     qemu_log_mask(LOG_GUEST_ERROR, "%s: bad read: addr=0x%x\n",
99                   __func__, (int)addr);
100     return 0;
101 }
102 
103 static void
104 sifive_uart_write(void *opaque, hwaddr addr,
105                   uint64_t val64, unsigned int size)
106 {
107     SiFiveUARTState *s = opaque;
108     uint32_t value = val64;
109     unsigned char ch = value;
110 
111     switch (addr) {
112     case SIFIVE_UART_TXFIFO:
113         qemu_chr_fe_write(&s->chr, &ch, 1);
114         sifive_uart_update_irq(s);
115         return;
116     case SIFIVE_UART_IE:
117         s->ie = val64;
118         sifive_uart_update_irq(s);
119         return;
120     case SIFIVE_UART_TXCTRL:
121         s->txctrl = val64;
122         return;
123     case SIFIVE_UART_RXCTRL:
124         s->rxctrl = val64;
125         return;
126     case SIFIVE_UART_DIV:
127         s->div = val64;
128         return;
129     }
130     qemu_log_mask(LOG_GUEST_ERROR, "%s: bad write: addr=0x%x v=0x%x\n",
131                   __func__, (int)addr, (int)value);
132 }
133 
134 static const MemoryRegionOps sifive_uart_ops = {
135     .read = sifive_uart_read,
136     .write = sifive_uart_write,
137     .endianness = DEVICE_NATIVE_ENDIAN,
138     .valid = {
139         .min_access_size = 4,
140         .max_access_size = 4
141     }
142 };
143 
144 static void sifive_uart_rx(void *opaque, const uint8_t *buf, int size)
145 {
146     SiFiveUARTState *s = opaque;
147 
148     /* Got a byte.  */
149     if (s->rx_fifo_len >= sizeof(s->rx_fifo)) {
150         printf("WARNING: UART dropped char.\n");
151         return;
152     }
153     s->rx_fifo[s->rx_fifo_len++] = *buf;
154 
155     sifive_uart_update_irq(s);
156 }
157 
158 static int sifive_uart_can_rx(void *opaque)
159 {
160     SiFiveUARTState *s = opaque;
161 
162     return s->rx_fifo_len < sizeof(s->rx_fifo);
163 }
164 
165 static void sifive_uart_event(void *opaque, QEMUChrEvent event)
166 {
167 }
168 
169 static int sifive_uart_be_change(void *opaque)
170 {
171     SiFiveUARTState *s = opaque;
172 
173     qemu_chr_fe_set_handlers(&s->chr, sifive_uart_can_rx, sifive_uart_rx,
174                              sifive_uart_event, sifive_uart_be_change, s,
175                              NULL, true);
176 
177     return 0;
178 }
179 
180 static Property sifive_uart_properties[] = {
181     DEFINE_PROP_CHR("chardev", SiFiveUARTState, chr),
182     DEFINE_PROP_END_OF_LIST(),
183 };
184 
185 static void sifive_uart_init(Object *obj)
186 {
187     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
188     SiFiveUARTState *s = SIFIVE_UART(obj);
189 
190     memory_region_init_io(&s->mmio, OBJECT(s), &sifive_uart_ops, s,
191                           TYPE_SIFIVE_UART, SIFIVE_UART_MAX);
192     sysbus_init_mmio(sbd, &s->mmio);
193     sysbus_init_irq(sbd, &s->irq);
194 }
195 
196 static void sifive_uart_realize(DeviceState *dev, Error **errp)
197 {
198     SiFiveUARTState *s = SIFIVE_UART(dev);
199 
200     qemu_chr_fe_set_handlers(&s->chr, sifive_uart_can_rx, sifive_uart_rx,
201                              sifive_uart_event, sifive_uart_be_change, s,
202                              NULL, true);
203 
204 }
205 
206 static void sifive_uart_reset_enter(Object *obj, ResetType type)
207 {
208     SiFiveUARTState *s = SIFIVE_UART(obj);
209     s->ie = 0;
210     s->ip = 0;
211     s->txctrl = 0;
212     s->rxctrl = 0;
213     s->div = 0;
214     s->rx_fifo_len = 0;
215 }
216 
217 static void sifive_uart_reset_hold(Object *obj)
218 {
219     SiFiveUARTState *s = SIFIVE_UART(obj);
220     qemu_irq_lower(s->irq);
221 }
222 
223 static const VMStateDescription vmstate_sifive_uart = {
224     .name = TYPE_SIFIVE_UART,
225     .version_id = 1,
226     .minimum_version_id = 1,
227     .fields = (VMStateField[]) {
228         VMSTATE_UINT8_ARRAY(rx_fifo, SiFiveUARTState,
229                             SIFIVE_UART_RX_FIFO_SIZE),
230         VMSTATE_UINT8(rx_fifo_len, SiFiveUARTState),
231         VMSTATE_UINT32(ie, SiFiveUARTState),
232         VMSTATE_UINT32(ip, SiFiveUARTState),
233         VMSTATE_UINT32(txctrl, SiFiveUARTState),
234         VMSTATE_UINT32(rxctrl, SiFiveUARTState),
235         VMSTATE_UINT32(div, SiFiveUARTState),
236         VMSTATE_END_OF_LIST()
237     },
238 };
239 
240 
241 static void sifive_uart_class_init(ObjectClass *oc, void *data)
242 {
243     DeviceClass *dc = DEVICE_CLASS(oc);
244     ResettableClass *rc = RESETTABLE_CLASS(oc);
245 
246     dc->realize = sifive_uart_realize;
247     dc->vmsd = &vmstate_sifive_uart;
248     rc->phases.enter = sifive_uart_reset_enter;
249     rc->phases.hold  = sifive_uart_reset_hold;
250     device_class_set_props(dc, sifive_uart_properties);
251 }
252 
253 static const TypeInfo sifive_uart_info = {
254     .name          = TYPE_SIFIVE_UART,
255     .parent        = TYPE_SYS_BUS_DEVICE,
256     .instance_size = sizeof(SiFiveUARTState),
257     .instance_init = sifive_uart_init,
258     .class_init    = sifive_uart_class_init,
259 };
260 
261 static void sifive_uart_register_types(void)
262 {
263     type_register_static(&sifive_uart_info);
264 }
265 
266 type_init(sifive_uart_register_types)
267 
268 /*
269  * Create UART device.
270  */
271 SiFiveUARTState *sifive_uart_create(MemoryRegion *address_space, hwaddr base,
272     Chardev *chr, qemu_irq irq)
273 {
274     DeviceState *dev;
275     SysBusDevice *s;
276     SiFiveUARTState *r;
277 
278     dev = qdev_new("riscv.sifive.uart");
279     s = SYS_BUS_DEVICE(dev);
280     qdev_prop_set_chr(dev, "chardev", chr);
281     sysbus_realize_and_unref(s, &error_fatal);
282     memory_region_add_subregion(address_space, base,
283                                 sysbus_mmio_get_region(s, 0));
284     sysbus_connect_irq(s, 0, irq);
285 
286     r = SIFIVE_UART(dev);
287     return r;
288 }
289