xref: /openbmc/qemu/hw/char/parallel.c (revision ddda3748)
1 /*
2  * QEMU Parallel PORT emulation
3  *
4  * Copyright (c) 2003-2005 Fabrice Bellard
5  * Copyright (c) 2007 Marko Kohtala
6  *
7  * Permission is hereby granted, free of charge, to any person obtaining a copy
8  * of this software and associated documentation files (the "Software"), to deal
9  * in the Software without restriction, including without limitation the rights
10  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
11  * copies of the Software, and to permit persons to whom the Software is
12  * furnished to do so, subject to the following conditions:
13  *
14  * The above copyright notice and this permission notice shall be included in
15  * all copies or substantial portions of the Software.
16  *
17  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
18  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
19  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
20  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
21  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
22  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
23  * THE SOFTWARE.
24  */
25 
26 #include "qemu/osdep.h"
27 #include "qapi/error.h"
28 #include "qemu/module.h"
29 #include "chardev/char-parallel.h"
30 #include "chardev/char-fe.h"
31 #include "hw/irq.h"
32 #include "hw/isa/isa.h"
33 #include "hw/qdev-properties.h"
34 #include "migration/vmstate.h"
35 #include "hw/char/parallel.h"
36 #include "sysemu/reset.h"
37 #include "sysemu/sysemu.h"
38 #include "trace.h"
39 
40 //#define DEBUG_PARALLEL
41 
42 #ifdef DEBUG_PARALLEL
43 #define pdebug(fmt, ...) printf("pp: " fmt, ## __VA_ARGS__)
44 #else
45 #define pdebug(fmt, ...) ((void)0)
46 #endif
47 
48 #define PARA_REG_DATA 0
49 #define PARA_REG_STS 1
50 #define PARA_REG_CTR 2
51 #define PARA_REG_EPP_ADDR 3
52 #define PARA_REG_EPP_DATA 4
53 
54 /*
55  * These are the definitions for the Printer Status Register
56  */
57 #define PARA_STS_BUSY	0x80	/* Busy complement */
58 #define PARA_STS_ACK	0x40	/* Acknowledge */
59 #define PARA_STS_PAPER	0x20	/* Out of paper */
60 #define PARA_STS_ONLINE	0x10	/* Online */
61 #define PARA_STS_ERROR	0x08	/* Error complement */
62 #define PARA_STS_TMOUT	0x01	/* EPP timeout */
63 
64 /*
65  * These are the definitions for the Printer Control Register
66  */
67 #define PARA_CTR_DIR	0x20	/* Direction (1=read, 0=write) */
68 #define PARA_CTR_INTEN	0x10	/* IRQ Enable */
69 #define PARA_CTR_SELECT	0x08	/* Select In complement */
70 #define PARA_CTR_INIT	0x04	/* Initialize Printer complement */
71 #define PARA_CTR_AUTOLF	0x02	/* Auto linefeed complement */
72 #define PARA_CTR_STROBE	0x01	/* Strobe complement */
73 
74 #define PARA_CTR_SIGNAL (PARA_CTR_SELECT|PARA_CTR_INIT|PARA_CTR_AUTOLF|PARA_CTR_STROBE)
75 
76 typedef struct ParallelState {
77     MemoryRegion iomem;
78     uint8_t dataw;
79     uint8_t datar;
80     uint8_t status;
81     uint8_t control;
82     qemu_irq irq;
83     int irq_pending;
84     CharBackend chr;
85     int hw_driver;
86     int epp_timeout;
87     uint32_t last_read_offset; /* For debugging */
88     /* Memory-mapped interface */
89     int it_shift;
90     PortioList portio_list;
91 } ParallelState;
92 
93 #define TYPE_ISA_PARALLEL "isa-parallel"
94 #define ISA_PARALLEL(obj) \
95     OBJECT_CHECK(ISAParallelState, (obj), TYPE_ISA_PARALLEL)
96 
97 typedef struct ISAParallelState {
98     ISADevice parent_obj;
99 
100     uint32_t index;
101     uint32_t iobase;
102     uint32_t isairq;
103     ParallelState state;
104 } ISAParallelState;
105 
106 static void parallel_update_irq(ParallelState *s)
107 {
108     if (s->irq_pending)
109         qemu_irq_raise(s->irq);
110     else
111         qemu_irq_lower(s->irq);
112 }
113 
114 static void
115 parallel_ioport_write_sw(void *opaque, uint32_t addr, uint32_t val)
116 {
117     ParallelState *s = opaque;
118 
119     addr &= 7;
120     trace_parallel_ioport_write("SW", addr, val);
121     switch(addr) {
122     case PARA_REG_DATA:
123         s->dataw = val;
124         parallel_update_irq(s);
125         break;
126     case PARA_REG_CTR:
127         val |= 0xc0;
128         if ((val & PARA_CTR_INIT) == 0 ) {
129             s->status = PARA_STS_BUSY;
130             s->status |= PARA_STS_ACK;
131             s->status |= PARA_STS_ONLINE;
132             s->status |= PARA_STS_ERROR;
133         }
134         else if (val & PARA_CTR_SELECT) {
135             if (val & PARA_CTR_STROBE) {
136                 s->status &= ~PARA_STS_BUSY;
137                 if ((s->control & PARA_CTR_STROBE) == 0)
138                     /* XXX this blocks entire thread. Rewrite to use
139                      * qemu_chr_fe_write and background I/O callbacks */
140                     qemu_chr_fe_write_all(&s->chr, &s->dataw, 1);
141             } else {
142                 if (s->control & PARA_CTR_INTEN) {
143                     s->irq_pending = 1;
144                 }
145             }
146         }
147         parallel_update_irq(s);
148         s->control = val;
149         break;
150     }
151 }
152 
153 static void parallel_ioport_write_hw(void *opaque, uint32_t addr, uint32_t val)
154 {
155     ParallelState *s = opaque;
156     uint8_t parm = val;
157     int dir;
158 
159     /* Sometimes programs do several writes for timing purposes on old
160        HW. Take care not to waste time on writes that do nothing. */
161 
162     s->last_read_offset = ~0U;
163 
164     addr &= 7;
165     trace_parallel_ioport_write("HW", addr, val);
166     switch(addr) {
167     case PARA_REG_DATA:
168         if (s->dataw == val)
169             return;
170         pdebug("wd%02x\n", val);
171         qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_WRITE_DATA, &parm);
172         s->dataw = val;
173         break;
174     case PARA_REG_STS:
175         pdebug("ws%02x\n", val);
176         if (val & PARA_STS_TMOUT)
177             s->epp_timeout = 0;
178         break;
179     case PARA_REG_CTR:
180         val |= 0xc0;
181         if (s->control == val)
182             return;
183         pdebug("wc%02x\n", val);
184 
185         if ((val & PARA_CTR_DIR) != (s->control & PARA_CTR_DIR)) {
186             if (val & PARA_CTR_DIR) {
187                 dir = 1;
188             } else {
189                 dir = 0;
190             }
191             qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_DATA_DIR, &dir);
192             parm &= ~PARA_CTR_DIR;
193         }
194 
195         qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_WRITE_CONTROL, &parm);
196         s->control = val;
197         break;
198     case PARA_REG_EPP_ADDR:
199         if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT)
200             /* Controls not correct for EPP address cycle, so do nothing */
201             pdebug("wa%02x s\n", val);
202         else {
203             struct ParallelIOArg ioarg = { .buffer = &parm, .count = 1 };
204             if (qemu_chr_fe_ioctl(&s->chr,
205                                   CHR_IOCTL_PP_EPP_WRITE_ADDR, &ioarg)) {
206                 s->epp_timeout = 1;
207                 pdebug("wa%02x t\n", val);
208             }
209             else
210                 pdebug("wa%02x\n", val);
211         }
212         break;
213     case PARA_REG_EPP_DATA:
214         if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT)
215             /* Controls not correct for EPP data cycle, so do nothing */
216             pdebug("we%02x s\n", val);
217         else {
218             struct ParallelIOArg ioarg = { .buffer = &parm, .count = 1 };
219             if (qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg)) {
220                 s->epp_timeout = 1;
221                 pdebug("we%02x t\n", val);
222             }
223             else
224                 pdebug("we%02x\n", val);
225         }
226         break;
227     }
228 }
229 
230 static void
231 parallel_ioport_eppdata_write_hw2(void *opaque, uint32_t addr, uint32_t val)
232 {
233     ParallelState *s = opaque;
234     uint16_t eppdata = cpu_to_le16(val);
235     int err;
236     struct ParallelIOArg ioarg = {
237         .buffer = &eppdata, .count = sizeof(eppdata)
238     };
239 
240     trace_parallel_ioport_write("EPP", addr, val);
241     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) {
242         /* Controls not correct for EPP data cycle, so do nothing */
243         pdebug("we%04x s\n", val);
244         return;
245     }
246     err = qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg);
247     if (err) {
248         s->epp_timeout = 1;
249         pdebug("we%04x t\n", val);
250     }
251     else
252         pdebug("we%04x\n", val);
253 }
254 
255 static void
256 parallel_ioport_eppdata_write_hw4(void *opaque, uint32_t addr, uint32_t val)
257 {
258     ParallelState *s = opaque;
259     uint32_t eppdata = cpu_to_le32(val);
260     int err;
261     struct ParallelIOArg ioarg = {
262         .buffer = &eppdata, .count = sizeof(eppdata)
263     };
264 
265     trace_parallel_ioport_write("EPP", addr, val);
266     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) {
267         /* Controls not correct for EPP data cycle, so do nothing */
268         pdebug("we%08x s\n", val);
269         return;
270     }
271     err = qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg);
272     if (err) {
273         s->epp_timeout = 1;
274         pdebug("we%08x t\n", val);
275     }
276     else
277         pdebug("we%08x\n", val);
278 }
279 
280 static uint32_t parallel_ioport_read_sw(void *opaque, uint32_t addr)
281 {
282     ParallelState *s = opaque;
283     uint32_t ret = 0xff;
284 
285     addr &= 7;
286     switch(addr) {
287     case PARA_REG_DATA:
288         if (s->control & PARA_CTR_DIR)
289             ret = s->datar;
290         else
291             ret = s->dataw;
292         break;
293     case PARA_REG_STS:
294         ret = s->status;
295         s->irq_pending = 0;
296         if ((s->status & PARA_STS_BUSY) == 0 && (s->control & PARA_CTR_STROBE) == 0) {
297             /* XXX Fixme: wait 5 microseconds */
298             if (s->status & PARA_STS_ACK)
299                 s->status &= ~PARA_STS_ACK;
300             else {
301                 /* XXX Fixme: wait 5 microseconds */
302                 s->status |= PARA_STS_ACK;
303                 s->status |= PARA_STS_BUSY;
304             }
305         }
306         parallel_update_irq(s);
307         break;
308     case PARA_REG_CTR:
309         ret = s->control;
310         break;
311     }
312     trace_parallel_ioport_read("SW", addr, ret);
313     return ret;
314 }
315 
316 static uint32_t parallel_ioport_read_hw(void *opaque, uint32_t addr)
317 {
318     ParallelState *s = opaque;
319     uint8_t ret = 0xff;
320     addr &= 7;
321     switch(addr) {
322     case PARA_REG_DATA:
323         qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_READ_DATA, &ret);
324         if (s->last_read_offset != addr || s->datar != ret)
325             pdebug("rd%02x\n", ret);
326         s->datar = ret;
327         break;
328     case PARA_REG_STS:
329         qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_READ_STATUS, &ret);
330         ret &= ~PARA_STS_TMOUT;
331         if (s->epp_timeout)
332             ret |= PARA_STS_TMOUT;
333         if (s->last_read_offset != addr || s->status != ret)
334             pdebug("rs%02x\n", ret);
335         s->status = ret;
336         break;
337     case PARA_REG_CTR:
338         /* s->control has some bits fixed to 1. It is zero only when
339            it has not been yet written to.  */
340         if (s->control == 0) {
341             qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_READ_CONTROL, &ret);
342             if (s->last_read_offset != addr)
343                 pdebug("rc%02x\n", ret);
344             s->control = ret;
345         }
346         else {
347             ret = s->control;
348             if (s->last_read_offset != addr)
349                 pdebug("rc%02x\n", ret);
350         }
351         break;
352     case PARA_REG_EPP_ADDR:
353         if ((s->control & (PARA_CTR_DIR | PARA_CTR_SIGNAL)) !=
354             (PARA_CTR_DIR | PARA_CTR_INIT))
355             /* Controls not correct for EPP addr cycle, so do nothing */
356             pdebug("ra%02x s\n", ret);
357         else {
358             struct ParallelIOArg ioarg = { .buffer = &ret, .count = 1 };
359             if (qemu_chr_fe_ioctl(&s->chr,
360                                   CHR_IOCTL_PP_EPP_READ_ADDR, &ioarg)) {
361                 s->epp_timeout = 1;
362                 pdebug("ra%02x t\n", ret);
363             }
364             else
365                 pdebug("ra%02x\n", ret);
366         }
367         break;
368     case PARA_REG_EPP_DATA:
369         if ((s->control & (PARA_CTR_DIR | PARA_CTR_SIGNAL)) !=
370             (PARA_CTR_DIR | PARA_CTR_INIT))
371             /* Controls not correct for EPP data cycle, so do nothing */
372             pdebug("re%02x s\n", ret);
373         else {
374             struct ParallelIOArg ioarg = { .buffer = &ret, .count = 1 };
375             if (qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg)) {
376                 s->epp_timeout = 1;
377                 pdebug("re%02x t\n", ret);
378             }
379             else
380                 pdebug("re%02x\n", ret);
381         }
382         break;
383     }
384     trace_parallel_ioport_read("HW", addr, ret);
385     s->last_read_offset = addr;
386     return ret;
387 }
388 
389 static uint32_t
390 parallel_ioport_eppdata_read_hw2(void *opaque, uint32_t addr)
391 {
392     ParallelState *s = opaque;
393     uint32_t ret;
394     uint16_t eppdata = ~0;
395     int err;
396     struct ParallelIOArg ioarg = {
397         .buffer = &eppdata, .count = sizeof(eppdata)
398     };
399     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT)) {
400         /* Controls not correct for EPP data cycle, so do nothing */
401         pdebug("re%04x s\n", eppdata);
402         return eppdata;
403     }
404     err = qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg);
405     ret = le16_to_cpu(eppdata);
406 
407     if (err) {
408         s->epp_timeout = 1;
409         pdebug("re%04x t\n", ret);
410     }
411     else
412         pdebug("re%04x\n", ret);
413     trace_parallel_ioport_read("EPP", addr, ret);
414     return ret;
415 }
416 
417 static uint32_t
418 parallel_ioport_eppdata_read_hw4(void *opaque, uint32_t addr)
419 {
420     ParallelState *s = opaque;
421     uint32_t ret;
422     uint32_t eppdata = ~0U;
423     int err;
424     struct ParallelIOArg ioarg = {
425         .buffer = &eppdata, .count = sizeof(eppdata)
426     };
427     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT)) {
428         /* Controls not correct for EPP data cycle, so do nothing */
429         pdebug("re%08x s\n", eppdata);
430         return eppdata;
431     }
432     err = qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg);
433     ret = le32_to_cpu(eppdata);
434 
435     if (err) {
436         s->epp_timeout = 1;
437         pdebug("re%08x t\n", ret);
438     }
439     else
440         pdebug("re%08x\n", ret);
441     trace_parallel_ioport_read("EPP", addr, ret);
442     return ret;
443 }
444 
445 static void parallel_ioport_ecp_write(void *opaque, uint32_t addr, uint32_t val)
446 {
447     trace_parallel_ioport_write("ECP", addr & 7, val);
448     pdebug("wecp%d=%02x\n", addr & 7, val);
449 }
450 
451 static uint32_t parallel_ioport_ecp_read(void *opaque, uint32_t addr)
452 {
453     uint8_t ret = 0xff;
454 
455     trace_parallel_ioport_read("ECP", addr & 7, ret);
456     pdebug("recp%d:%02x\n", addr & 7, ret);
457     return ret;
458 }
459 
460 static void parallel_reset(void *opaque)
461 {
462     ParallelState *s = opaque;
463 
464     s->datar = ~0;
465     s->dataw = ~0;
466     s->status = PARA_STS_BUSY;
467     s->status |= PARA_STS_ACK;
468     s->status |= PARA_STS_ONLINE;
469     s->status |= PARA_STS_ERROR;
470     s->status |= PARA_STS_TMOUT;
471     s->control = PARA_CTR_SELECT;
472     s->control |= PARA_CTR_INIT;
473     s->control |= 0xc0;
474     s->irq_pending = 0;
475     s->hw_driver = 0;
476     s->epp_timeout = 0;
477     s->last_read_offset = ~0U;
478 }
479 
480 static const int isa_parallel_io[MAX_PARALLEL_PORTS] = { 0x378, 0x278, 0x3bc };
481 
482 static const MemoryRegionPortio isa_parallel_portio_hw_list[] = {
483     { 0, 8, 1,
484       .read = parallel_ioport_read_hw,
485       .write = parallel_ioport_write_hw },
486     { 4, 1, 2,
487       .read = parallel_ioport_eppdata_read_hw2,
488       .write = parallel_ioport_eppdata_write_hw2 },
489     { 4, 1, 4,
490       .read = parallel_ioport_eppdata_read_hw4,
491       .write = parallel_ioport_eppdata_write_hw4 },
492     { 0x400, 8, 1,
493       .read = parallel_ioport_ecp_read,
494       .write = parallel_ioport_ecp_write },
495     PORTIO_END_OF_LIST(),
496 };
497 
498 static const MemoryRegionPortio isa_parallel_portio_sw_list[] = {
499     { 0, 8, 1,
500       .read = parallel_ioport_read_sw,
501       .write = parallel_ioport_write_sw },
502     PORTIO_END_OF_LIST(),
503 };
504 
505 
506 static const VMStateDescription vmstate_parallel_isa = {
507     .name = "parallel_isa",
508     .version_id = 1,
509     .minimum_version_id = 1,
510     .fields      = (VMStateField[]) {
511         VMSTATE_UINT8(state.dataw, ISAParallelState),
512         VMSTATE_UINT8(state.datar, ISAParallelState),
513         VMSTATE_UINT8(state.status, ISAParallelState),
514         VMSTATE_UINT8(state.control, ISAParallelState),
515         VMSTATE_INT32(state.irq_pending, ISAParallelState),
516         VMSTATE_INT32(state.epp_timeout, ISAParallelState),
517         VMSTATE_END_OF_LIST()
518     }
519 };
520 
521 static int parallel_can_receive(void *opaque)
522 {
523      return 1;
524 }
525 
526 static void parallel_isa_realizefn(DeviceState *dev, Error **errp)
527 {
528     static int index;
529     ISADevice *isadev = ISA_DEVICE(dev);
530     ISAParallelState *isa = ISA_PARALLEL(dev);
531     ParallelState *s = &isa->state;
532     int base;
533     uint8_t dummy;
534 
535     if (!qemu_chr_fe_backend_connected(&s->chr)) {
536         error_setg(errp, "Can't create parallel device, empty char device");
537         return;
538     }
539 
540     if (isa->index == -1) {
541         isa->index = index;
542     }
543     if (isa->index >= MAX_PARALLEL_PORTS) {
544         error_setg(errp, "Max. supported number of parallel ports is %d.",
545                    MAX_PARALLEL_PORTS);
546         return;
547     }
548     if (isa->iobase == -1) {
549         isa->iobase = isa_parallel_io[isa->index];
550     }
551     index++;
552 
553     base = isa->iobase;
554     isa_init_irq(isadev, &s->irq, isa->isairq);
555     qemu_register_reset(parallel_reset, s);
556 
557     qemu_chr_fe_set_handlers(&s->chr, parallel_can_receive, NULL,
558                              NULL, NULL, s, NULL, true);
559     if (qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_READ_STATUS, &dummy) == 0) {
560         s->hw_driver = 1;
561         s->status = dummy;
562     }
563 
564     isa_register_portio_list(isadev, &s->portio_list, base,
565                              (s->hw_driver
566                               ? &isa_parallel_portio_hw_list[0]
567                               : &isa_parallel_portio_sw_list[0]),
568                              s, "parallel");
569 }
570 
571 /* Memory mapped interface */
572 static uint64_t parallel_mm_readfn(void *opaque, hwaddr addr, unsigned size)
573 {
574     ParallelState *s = opaque;
575 
576     return parallel_ioport_read_sw(s, addr >> s->it_shift) &
577         MAKE_64BIT_MASK(0, size * 8);
578 }
579 
580 static void parallel_mm_writefn(void *opaque, hwaddr addr,
581                                 uint64_t value, unsigned size)
582 {
583     ParallelState *s = opaque;
584 
585     parallel_ioport_write_sw(s, addr >> s->it_shift,
586                              value & MAKE_64BIT_MASK(0, size * 8));
587 }
588 
589 static const MemoryRegionOps parallel_mm_ops = {
590     .read = parallel_mm_readfn,
591     .write = parallel_mm_writefn,
592     .valid.min_access_size = 1,
593     .valid.max_access_size = 4,
594     .endianness = DEVICE_NATIVE_ENDIAN,
595 };
596 
597 /* If fd is zero, it means that the parallel device uses the console */
598 bool parallel_mm_init(MemoryRegion *address_space,
599                       hwaddr base, int it_shift, qemu_irq irq,
600                       Chardev *chr)
601 {
602     ParallelState *s;
603 
604     s = g_malloc0(sizeof(ParallelState));
605     s->irq = irq;
606     qemu_chr_fe_init(&s->chr, chr, &error_abort);
607     s->it_shift = it_shift;
608     qemu_register_reset(parallel_reset, s);
609 
610     memory_region_init_io(&s->iomem, NULL, &parallel_mm_ops, s,
611                           "parallel", 8 << it_shift);
612     memory_region_add_subregion(address_space, base, &s->iomem);
613     return true;
614 }
615 
616 static Property parallel_isa_properties[] = {
617     DEFINE_PROP_UINT32("index", ISAParallelState, index,   -1),
618     DEFINE_PROP_UINT32("iobase", ISAParallelState, iobase,  -1),
619     DEFINE_PROP_UINT32("irq",   ISAParallelState, isairq,  7),
620     DEFINE_PROP_CHR("chardev",  ISAParallelState, state.chr),
621     DEFINE_PROP_END_OF_LIST(),
622 };
623 
624 static void parallel_isa_class_initfn(ObjectClass *klass, void *data)
625 {
626     DeviceClass *dc = DEVICE_CLASS(klass);
627 
628     dc->realize = parallel_isa_realizefn;
629     dc->vmsd = &vmstate_parallel_isa;
630     device_class_set_props(dc, parallel_isa_properties);
631     set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
632 }
633 
634 static const TypeInfo parallel_isa_info = {
635     .name          = TYPE_ISA_PARALLEL,
636     .parent        = TYPE_ISA_DEVICE,
637     .instance_size = sizeof(ISAParallelState),
638     .class_init    = parallel_isa_class_initfn,
639 };
640 
641 static void parallel_register_types(void)
642 {
643     type_register_static(&parallel_isa_info);
644 }
645 
646 type_init(parallel_register_types)
647