xref: /openbmc/qemu/hw/char/parallel.c (revision 4a09d0bb)
1 /*
2  * QEMU Parallel PORT emulation
3  *
4  * Copyright (c) 2003-2005 Fabrice Bellard
5  * Copyright (c) 2007 Marko Kohtala
6  *
7  * Permission is hereby granted, free of charge, to any person obtaining a copy
8  * of this software and associated documentation files (the "Software"), to deal
9  * in the Software without restriction, including without limitation the rights
10  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
11  * copies of the Software, and to permit persons to whom the Software is
12  * furnished to do so, subject to the following conditions:
13  *
14  * The above copyright notice and this permission notice shall be included in
15  * all copies or substantial portions of the Software.
16  *
17  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
18  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
19  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
20  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
21  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
22  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
23  * THE SOFTWARE.
24  */
25 #include "qemu/osdep.h"
26 #include "qapi/error.h"
27 #include "hw/hw.h"
28 #include "sysemu/char.h"
29 #include "hw/isa/isa.h"
30 #include "hw/i386/pc.h"
31 #include "sysemu/sysemu.h"
32 
33 //#define DEBUG_PARALLEL
34 
35 #ifdef DEBUG_PARALLEL
36 #define pdebug(fmt, ...) printf("pp: " fmt, ## __VA_ARGS__)
37 #else
38 #define pdebug(fmt, ...) ((void)0)
39 #endif
40 
41 #define PARA_REG_DATA 0
42 #define PARA_REG_STS 1
43 #define PARA_REG_CTR 2
44 #define PARA_REG_EPP_ADDR 3
45 #define PARA_REG_EPP_DATA 4
46 
47 /*
48  * These are the definitions for the Printer Status Register
49  */
50 #define PARA_STS_BUSY	0x80	/* Busy complement */
51 #define PARA_STS_ACK	0x40	/* Acknowledge */
52 #define PARA_STS_PAPER	0x20	/* Out of paper */
53 #define PARA_STS_ONLINE	0x10	/* Online */
54 #define PARA_STS_ERROR	0x08	/* Error complement */
55 #define PARA_STS_TMOUT	0x01	/* EPP timeout */
56 
57 /*
58  * These are the definitions for the Printer Control Register
59  */
60 #define PARA_CTR_DIR	0x20	/* Direction (1=read, 0=write) */
61 #define PARA_CTR_INTEN	0x10	/* IRQ Enable */
62 #define PARA_CTR_SELECT	0x08	/* Select In complement */
63 #define PARA_CTR_INIT	0x04	/* Initialize Printer complement */
64 #define PARA_CTR_AUTOLF	0x02	/* Auto linefeed complement */
65 #define PARA_CTR_STROBE	0x01	/* Strobe complement */
66 
67 #define PARA_CTR_SIGNAL (PARA_CTR_SELECT|PARA_CTR_INIT|PARA_CTR_AUTOLF|PARA_CTR_STROBE)
68 
69 typedef struct ParallelState {
70     MemoryRegion iomem;
71     uint8_t dataw;
72     uint8_t datar;
73     uint8_t status;
74     uint8_t control;
75     qemu_irq irq;
76     int irq_pending;
77     CharBackend chr;
78     int hw_driver;
79     int epp_timeout;
80     uint32_t last_read_offset; /* For debugging */
81     /* Memory-mapped interface */
82     int it_shift;
83     PortioList portio_list;
84 } ParallelState;
85 
86 #define TYPE_ISA_PARALLEL "isa-parallel"
87 #define ISA_PARALLEL(obj) \
88     OBJECT_CHECK(ISAParallelState, (obj), TYPE_ISA_PARALLEL)
89 
90 typedef struct ISAParallelState {
91     ISADevice parent_obj;
92 
93     uint32_t index;
94     uint32_t iobase;
95     uint32_t isairq;
96     ParallelState state;
97 } ISAParallelState;
98 
99 static void parallel_update_irq(ParallelState *s)
100 {
101     if (s->irq_pending)
102         qemu_irq_raise(s->irq);
103     else
104         qemu_irq_lower(s->irq);
105 }
106 
107 static void
108 parallel_ioport_write_sw(void *opaque, uint32_t addr, uint32_t val)
109 {
110     ParallelState *s = opaque;
111 
112     pdebug("write addr=0x%02x val=0x%02x\n", addr, val);
113 
114     addr &= 7;
115     switch(addr) {
116     case PARA_REG_DATA:
117         s->dataw = val;
118         parallel_update_irq(s);
119         break;
120     case PARA_REG_CTR:
121         val |= 0xc0;
122         if ((val & PARA_CTR_INIT) == 0 ) {
123             s->status = PARA_STS_BUSY;
124             s->status |= PARA_STS_ACK;
125             s->status |= PARA_STS_ONLINE;
126             s->status |= PARA_STS_ERROR;
127         }
128         else if (val & PARA_CTR_SELECT) {
129             if (val & PARA_CTR_STROBE) {
130                 s->status &= ~PARA_STS_BUSY;
131                 if ((s->control & PARA_CTR_STROBE) == 0)
132                     /* XXX this blocks entire thread. Rewrite to use
133                      * qemu_chr_fe_write and background I/O callbacks */
134                     qemu_chr_fe_write_all(&s->chr, &s->dataw, 1);
135             } else {
136                 if (s->control & PARA_CTR_INTEN) {
137                     s->irq_pending = 1;
138                 }
139             }
140         }
141         parallel_update_irq(s);
142         s->control = val;
143         break;
144     }
145 }
146 
147 static void parallel_ioport_write_hw(void *opaque, uint32_t addr, uint32_t val)
148 {
149     ParallelState *s = opaque;
150     uint8_t parm = val;
151     int dir;
152 
153     /* Sometimes programs do several writes for timing purposes on old
154        HW. Take care not to waste time on writes that do nothing. */
155 
156     s->last_read_offset = ~0U;
157 
158     addr &= 7;
159     switch(addr) {
160     case PARA_REG_DATA:
161         if (s->dataw == val)
162             return;
163         pdebug("wd%02x\n", val);
164         qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_WRITE_DATA, &parm);
165         s->dataw = val;
166         break;
167     case PARA_REG_STS:
168         pdebug("ws%02x\n", val);
169         if (val & PARA_STS_TMOUT)
170             s->epp_timeout = 0;
171         break;
172     case PARA_REG_CTR:
173         val |= 0xc0;
174         if (s->control == val)
175             return;
176         pdebug("wc%02x\n", val);
177 
178         if ((val & PARA_CTR_DIR) != (s->control & PARA_CTR_DIR)) {
179             if (val & PARA_CTR_DIR) {
180                 dir = 1;
181             } else {
182                 dir = 0;
183             }
184             qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_DATA_DIR, &dir);
185             parm &= ~PARA_CTR_DIR;
186         }
187 
188         qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_WRITE_CONTROL, &parm);
189         s->control = val;
190         break;
191     case PARA_REG_EPP_ADDR:
192         if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT)
193             /* Controls not correct for EPP address cycle, so do nothing */
194             pdebug("wa%02x s\n", val);
195         else {
196             struct ParallelIOArg ioarg = { .buffer = &parm, .count = 1 };
197             if (qemu_chr_fe_ioctl(&s->chr,
198                                   CHR_IOCTL_PP_EPP_WRITE_ADDR, &ioarg)) {
199                 s->epp_timeout = 1;
200                 pdebug("wa%02x t\n", val);
201             }
202             else
203                 pdebug("wa%02x\n", val);
204         }
205         break;
206     case PARA_REG_EPP_DATA:
207         if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT)
208             /* Controls not correct for EPP data cycle, so do nothing */
209             pdebug("we%02x s\n", val);
210         else {
211             struct ParallelIOArg ioarg = { .buffer = &parm, .count = 1 };
212             if (qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg)) {
213                 s->epp_timeout = 1;
214                 pdebug("we%02x t\n", val);
215             }
216             else
217                 pdebug("we%02x\n", val);
218         }
219         break;
220     }
221 }
222 
223 static void
224 parallel_ioport_eppdata_write_hw2(void *opaque, uint32_t addr, uint32_t val)
225 {
226     ParallelState *s = opaque;
227     uint16_t eppdata = cpu_to_le16(val);
228     int err;
229     struct ParallelIOArg ioarg = {
230         .buffer = &eppdata, .count = sizeof(eppdata)
231     };
232     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) {
233         /* Controls not correct for EPP data cycle, so do nothing */
234         pdebug("we%04x s\n", val);
235         return;
236     }
237     err = qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg);
238     if (err) {
239         s->epp_timeout = 1;
240         pdebug("we%04x t\n", val);
241     }
242     else
243         pdebug("we%04x\n", val);
244 }
245 
246 static void
247 parallel_ioport_eppdata_write_hw4(void *opaque, uint32_t addr, uint32_t val)
248 {
249     ParallelState *s = opaque;
250     uint32_t eppdata = cpu_to_le32(val);
251     int err;
252     struct ParallelIOArg ioarg = {
253         .buffer = &eppdata, .count = sizeof(eppdata)
254     };
255     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) {
256         /* Controls not correct for EPP data cycle, so do nothing */
257         pdebug("we%08x s\n", val);
258         return;
259     }
260     err = qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg);
261     if (err) {
262         s->epp_timeout = 1;
263         pdebug("we%08x t\n", val);
264     }
265     else
266         pdebug("we%08x\n", val);
267 }
268 
269 static uint32_t parallel_ioport_read_sw(void *opaque, uint32_t addr)
270 {
271     ParallelState *s = opaque;
272     uint32_t ret = 0xff;
273 
274     addr &= 7;
275     switch(addr) {
276     case PARA_REG_DATA:
277         if (s->control & PARA_CTR_DIR)
278             ret = s->datar;
279         else
280             ret = s->dataw;
281         break;
282     case PARA_REG_STS:
283         ret = s->status;
284         s->irq_pending = 0;
285         if ((s->status & PARA_STS_BUSY) == 0 && (s->control & PARA_CTR_STROBE) == 0) {
286             /* XXX Fixme: wait 5 microseconds */
287             if (s->status & PARA_STS_ACK)
288                 s->status &= ~PARA_STS_ACK;
289             else {
290                 /* XXX Fixme: wait 5 microseconds */
291                 s->status |= PARA_STS_ACK;
292                 s->status |= PARA_STS_BUSY;
293             }
294         }
295         parallel_update_irq(s);
296         break;
297     case PARA_REG_CTR:
298         ret = s->control;
299         break;
300     }
301     pdebug("read addr=0x%02x val=0x%02x\n", addr, ret);
302     return ret;
303 }
304 
305 static uint32_t parallel_ioport_read_hw(void *opaque, uint32_t addr)
306 {
307     ParallelState *s = opaque;
308     uint8_t ret = 0xff;
309     addr &= 7;
310     switch(addr) {
311     case PARA_REG_DATA:
312         qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_READ_DATA, &ret);
313         if (s->last_read_offset != addr || s->datar != ret)
314             pdebug("rd%02x\n", ret);
315         s->datar = ret;
316         break;
317     case PARA_REG_STS:
318         qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_READ_STATUS, &ret);
319         ret &= ~PARA_STS_TMOUT;
320         if (s->epp_timeout)
321             ret |= PARA_STS_TMOUT;
322         if (s->last_read_offset != addr || s->status != ret)
323             pdebug("rs%02x\n", ret);
324         s->status = ret;
325         break;
326     case PARA_REG_CTR:
327         /* s->control has some bits fixed to 1. It is zero only when
328            it has not been yet written to.  */
329         if (s->control == 0) {
330             qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_READ_CONTROL, &ret);
331             if (s->last_read_offset != addr)
332                 pdebug("rc%02x\n", ret);
333             s->control = ret;
334         }
335         else {
336             ret = s->control;
337             if (s->last_read_offset != addr)
338                 pdebug("rc%02x\n", ret);
339         }
340         break;
341     case PARA_REG_EPP_ADDR:
342         if ((s->control & (PARA_CTR_DIR | PARA_CTR_SIGNAL)) !=
343             (PARA_CTR_DIR | PARA_CTR_INIT))
344             /* Controls not correct for EPP addr cycle, so do nothing */
345             pdebug("ra%02x s\n", ret);
346         else {
347             struct ParallelIOArg ioarg = { .buffer = &ret, .count = 1 };
348             if (qemu_chr_fe_ioctl(&s->chr,
349                                   CHR_IOCTL_PP_EPP_READ_ADDR, &ioarg)) {
350                 s->epp_timeout = 1;
351                 pdebug("ra%02x t\n", ret);
352             }
353             else
354                 pdebug("ra%02x\n", ret);
355         }
356         break;
357     case PARA_REG_EPP_DATA:
358         if ((s->control & (PARA_CTR_DIR | PARA_CTR_SIGNAL)) !=
359             (PARA_CTR_DIR | PARA_CTR_INIT))
360             /* Controls not correct for EPP data cycle, so do nothing */
361             pdebug("re%02x s\n", ret);
362         else {
363             struct ParallelIOArg ioarg = { .buffer = &ret, .count = 1 };
364             if (qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg)) {
365                 s->epp_timeout = 1;
366                 pdebug("re%02x t\n", ret);
367             }
368             else
369                 pdebug("re%02x\n", ret);
370         }
371         break;
372     }
373     s->last_read_offset = addr;
374     return ret;
375 }
376 
377 static uint32_t
378 parallel_ioport_eppdata_read_hw2(void *opaque, uint32_t addr)
379 {
380     ParallelState *s = opaque;
381     uint32_t ret;
382     uint16_t eppdata = ~0;
383     int err;
384     struct ParallelIOArg ioarg = {
385         .buffer = &eppdata, .count = sizeof(eppdata)
386     };
387     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT)) {
388         /* Controls not correct for EPP data cycle, so do nothing */
389         pdebug("re%04x s\n", eppdata);
390         return eppdata;
391     }
392     err = qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg);
393     ret = le16_to_cpu(eppdata);
394 
395     if (err) {
396         s->epp_timeout = 1;
397         pdebug("re%04x t\n", ret);
398     }
399     else
400         pdebug("re%04x\n", ret);
401     return ret;
402 }
403 
404 static uint32_t
405 parallel_ioport_eppdata_read_hw4(void *opaque, uint32_t addr)
406 {
407     ParallelState *s = opaque;
408     uint32_t ret;
409     uint32_t eppdata = ~0U;
410     int err;
411     struct ParallelIOArg ioarg = {
412         .buffer = &eppdata, .count = sizeof(eppdata)
413     };
414     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT)) {
415         /* Controls not correct for EPP data cycle, so do nothing */
416         pdebug("re%08x s\n", eppdata);
417         return eppdata;
418     }
419     err = qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg);
420     ret = le32_to_cpu(eppdata);
421 
422     if (err) {
423         s->epp_timeout = 1;
424         pdebug("re%08x t\n", ret);
425     }
426     else
427         pdebug("re%08x\n", ret);
428     return ret;
429 }
430 
431 static void parallel_ioport_ecp_write(void *opaque, uint32_t addr, uint32_t val)
432 {
433     pdebug("wecp%d=%02x\n", addr & 7, val);
434 }
435 
436 static uint32_t parallel_ioport_ecp_read(void *opaque, uint32_t addr)
437 {
438     uint8_t ret = 0xff;
439 
440     pdebug("recp%d:%02x\n", addr & 7, ret);
441     return ret;
442 }
443 
444 static void parallel_reset(void *opaque)
445 {
446     ParallelState *s = opaque;
447 
448     s->datar = ~0;
449     s->dataw = ~0;
450     s->status = PARA_STS_BUSY;
451     s->status |= PARA_STS_ACK;
452     s->status |= PARA_STS_ONLINE;
453     s->status |= PARA_STS_ERROR;
454     s->status |= PARA_STS_TMOUT;
455     s->control = PARA_CTR_SELECT;
456     s->control |= PARA_CTR_INIT;
457     s->control |= 0xc0;
458     s->irq_pending = 0;
459     s->hw_driver = 0;
460     s->epp_timeout = 0;
461     s->last_read_offset = ~0U;
462 }
463 
464 static const int isa_parallel_io[MAX_PARALLEL_PORTS] = { 0x378, 0x278, 0x3bc };
465 
466 static const MemoryRegionPortio isa_parallel_portio_hw_list[] = {
467     { 0, 8, 1,
468       .read = parallel_ioport_read_hw,
469       .write = parallel_ioport_write_hw },
470     { 4, 1, 2,
471       .read = parallel_ioport_eppdata_read_hw2,
472       .write = parallel_ioport_eppdata_write_hw2 },
473     { 4, 1, 4,
474       .read = parallel_ioport_eppdata_read_hw4,
475       .write = parallel_ioport_eppdata_write_hw4 },
476     { 0x400, 8, 1,
477       .read = parallel_ioport_ecp_read,
478       .write = parallel_ioport_ecp_write },
479     PORTIO_END_OF_LIST(),
480 };
481 
482 static const MemoryRegionPortio isa_parallel_portio_sw_list[] = {
483     { 0, 8, 1,
484       .read = parallel_ioport_read_sw,
485       .write = parallel_ioport_write_sw },
486     PORTIO_END_OF_LIST(),
487 };
488 
489 
490 static const VMStateDescription vmstate_parallel_isa = {
491     .name = "parallel_isa",
492     .version_id = 1,
493     .minimum_version_id = 1,
494     .fields      = (VMStateField[]) {
495         VMSTATE_UINT8(state.dataw, ISAParallelState),
496         VMSTATE_UINT8(state.datar, ISAParallelState),
497         VMSTATE_UINT8(state.status, ISAParallelState),
498         VMSTATE_UINT8(state.control, ISAParallelState),
499         VMSTATE_INT32(state.irq_pending, ISAParallelState),
500         VMSTATE_INT32(state.epp_timeout, ISAParallelState),
501         VMSTATE_END_OF_LIST()
502     }
503 };
504 
505 
506 static void parallel_isa_realizefn(DeviceState *dev, Error **errp)
507 {
508     static int index;
509     ISADevice *isadev = ISA_DEVICE(dev);
510     ISAParallelState *isa = ISA_PARALLEL(dev);
511     ParallelState *s = &isa->state;
512     int base;
513     uint8_t dummy;
514 
515     if (!qemu_chr_fe_get_driver(&s->chr)) {
516         error_setg(errp, "Can't create parallel device, empty char device");
517         return;
518     }
519 
520     if (isa->index == -1) {
521         isa->index = index;
522     }
523     if (isa->index >= MAX_PARALLEL_PORTS) {
524         error_setg(errp, "Max. supported number of parallel ports is %d.",
525                    MAX_PARALLEL_PORTS);
526         return;
527     }
528     if (isa->iobase == -1) {
529         isa->iobase = isa_parallel_io[isa->index];
530     }
531     index++;
532 
533     base = isa->iobase;
534     isa_init_irq(isadev, &s->irq, isa->isairq);
535     qemu_register_reset(parallel_reset, s);
536 
537     if (qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_READ_STATUS, &dummy) == 0) {
538         s->hw_driver = 1;
539         s->status = dummy;
540     }
541 
542     isa_register_portio_list(isadev, &s->portio_list, base,
543                              (s->hw_driver
544                               ? &isa_parallel_portio_hw_list[0]
545                               : &isa_parallel_portio_sw_list[0]),
546                              s, "parallel");
547 }
548 
549 /* Memory mapped interface */
550 static uint32_t parallel_mm_readb (void *opaque, hwaddr addr)
551 {
552     ParallelState *s = opaque;
553 
554     return parallel_ioport_read_sw(s, addr >> s->it_shift) & 0xFF;
555 }
556 
557 static void parallel_mm_writeb (void *opaque,
558                                 hwaddr addr, uint32_t value)
559 {
560     ParallelState *s = opaque;
561 
562     parallel_ioport_write_sw(s, addr >> s->it_shift, value & 0xFF);
563 }
564 
565 static uint32_t parallel_mm_readw (void *opaque, hwaddr addr)
566 {
567     ParallelState *s = opaque;
568 
569     return parallel_ioport_read_sw(s, addr >> s->it_shift) & 0xFFFF;
570 }
571 
572 static void parallel_mm_writew (void *opaque,
573                                 hwaddr addr, uint32_t value)
574 {
575     ParallelState *s = opaque;
576 
577     parallel_ioport_write_sw(s, addr >> s->it_shift, value & 0xFFFF);
578 }
579 
580 static uint32_t parallel_mm_readl (void *opaque, hwaddr addr)
581 {
582     ParallelState *s = opaque;
583 
584     return parallel_ioport_read_sw(s, addr >> s->it_shift);
585 }
586 
587 static void parallel_mm_writel (void *opaque,
588                                 hwaddr addr, uint32_t value)
589 {
590     ParallelState *s = opaque;
591 
592     parallel_ioport_write_sw(s, addr >> s->it_shift, value);
593 }
594 
595 static const MemoryRegionOps parallel_mm_ops = {
596     .old_mmio = {
597         .read = { parallel_mm_readb, parallel_mm_readw, parallel_mm_readl },
598         .write = { parallel_mm_writeb, parallel_mm_writew, parallel_mm_writel },
599     },
600     .endianness = DEVICE_NATIVE_ENDIAN,
601 };
602 
603 /* If fd is zero, it means that the parallel device uses the console */
604 bool parallel_mm_init(MemoryRegion *address_space,
605                       hwaddr base, int it_shift, qemu_irq irq,
606                       Chardev *chr)
607 {
608     ParallelState *s;
609 
610     s = g_malloc0(sizeof(ParallelState));
611     s->irq = irq;
612     qemu_chr_fe_init(&s->chr, chr, &error_abort);
613     s->it_shift = it_shift;
614     qemu_register_reset(parallel_reset, s);
615 
616     memory_region_init_io(&s->iomem, NULL, &parallel_mm_ops, s,
617                           "parallel", 8 << it_shift);
618     memory_region_add_subregion(address_space, base, &s->iomem);
619     return true;
620 }
621 
622 static Property parallel_isa_properties[] = {
623     DEFINE_PROP_UINT32("index", ISAParallelState, index,   -1),
624     DEFINE_PROP_UINT32("iobase", ISAParallelState, iobase,  -1),
625     DEFINE_PROP_UINT32("irq",   ISAParallelState, isairq,  7),
626     DEFINE_PROP_CHR("chardev",  ISAParallelState, state.chr),
627     DEFINE_PROP_END_OF_LIST(),
628 };
629 
630 static void parallel_isa_class_initfn(ObjectClass *klass, void *data)
631 {
632     DeviceClass *dc = DEVICE_CLASS(klass);
633 
634     dc->realize = parallel_isa_realizefn;
635     dc->vmsd = &vmstate_parallel_isa;
636     dc->props = parallel_isa_properties;
637     set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
638 }
639 
640 static const TypeInfo parallel_isa_info = {
641     .name          = TYPE_ISA_PARALLEL,
642     .parent        = TYPE_ISA_DEVICE,
643     .instance_size = sizeof(ISAParallelState),
644     .class_init    = parallel_isa_class_initfn,
645 };
646 
647 static void parallel_register_types(void)
648 {
649     type_register_static(&parallel_isa_info);
650 }
651 
652 type_init(parallel_register_types)
653