1 /* 2 * QEMU Parallel PORT emulation 3 * 4 * Copyright (c) 2003-2005 Fabrice Bellard 5 * Copyright (c) 2007 Marko Kohtala 6 * 7 * Permission is hereby granted, free of charge, to any person obtaining a copy 8 * of this software and associated documentation files (the "Software"), to deal 9 * in the Software without restriction, including without limitation the rights 10 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 11 * copies of the Software, and to permit persons to whom the Software is 12 * furnished to do so, subject to the following conditions: 13 * 14 * The above copyright notice and this permission notice shall be included in 15 * all copies or substantial portions of the Software. 16 * 17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 20 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 21 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 22 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 23 * THE SOFTWARE. 24 */ 25 26 #include "qemu/osdep.h" 27 #include "qapi/error.h" 28 #include "qemu/module.h" 29 #include "chardev/char-parallel.h" 30 #include "hw/acpi/acpi_aml_interface.h" 31 #include "hw/qdev-properties.h" 32 #include "hw/qdev-properties-system.h" 33 #include "migration/vmstate.h" 34 #include "hw/char/parallel-isa.h" 35 #include "hw/char/parallel.h" 36 #include "sysemu/reset.h" 37 #include "sysemu/sysemu.h" 38 #include "trace.h" 39 #include "qom/object.h" 40 41 //#define DEBUG_PARALLEL 42 43 #ifdef DEBUG_PARALLEL 44 #define pdebug(fmt, ...) printf("pp: " fmt, ## __VA_ARGS__) 45 #else 46 #define pdebug(fmt, ...) ((void)0) 47 #endif 48 49 #define PARA_REG_DATA 0 50 #define PARA_REG_STS 1 51 #define PARA_REG_CTR 2 52 #define PARA_REG_EPP_ADDR 3 53 #define PARA_REG_EPP_DATA 4 54 55 /* 56 * These are the definitions for the Printer Status Register 57 */ 58 #define PARA_STS_BUSY 0x80 /* Busy complement */ 59 #define PARA_STS_ACK 0x40 /* Acknowledge */ 60 #define PARA_STS_PAPER 0x20 /* Out of paper */ 61 #define PARA_STS_ONLINE 0x10 /* Online */ 62 #define PARA_STS_ERROR 0x08 /* Error complement */ 63 #define PARA_STS_TMOUT 0x01 /* EPP timeout */ 64 65 /* 66 * These are the definitions for the Printer Control Register 67 */ 68 #define PARA_CTR_DIR 0x20 /* Direction (1=read, 0=write) */ 69 #define PARA_CTR_INTEN 0x10 /* IRQ Enable */ 70 #define PARA_CTR_SELECT 0x08 /* Select In complement */ 71 #define PARA_CTR_INIT 0x04 /* Initialize Printer complement */ 72 #define PARA_CTR_AUTOLF 0x02 /* Auto linefeed complement */ 73 #define PARA_CTR_STROBE 0x01 /* Strobe complement */ 74 75 #define PARA_CTR_SIGNAL (PARA_CTR_SELECT|PARA_CTR_INIT|PARA_CTR_AUTOLF|PARA_CTR_STROBE) 76 77 static void parallel_update_irq(ParallelState *s) 78 { 79 if (s->irq_pending) 80 qemu_irq_raise(s->irq); 81 else 82 qemu_irq_lower(s->irq); 83 } 84 85 static void 86 parallel_ioport_write_sw(void *opaque, uint32_t addr, uint32_t val) 87 { 88 ParallelState *s = opaque; 89 90 addr &= 7; 91 trace_parallel_ioport_write("SW", addr, val); 92 switch(addr) { 93 case PARA_REG_DATA: 94 s->dataw = val; 95 parallel_update_irq(s); 96 break; 97 case PARA_REG_CTR: 98 val |= 0xc0; 99 if ((val & PARA_CTR_INIT) == 0 ) { 100 s->status = PARA_STS_BUSY; 101 s->status |= PARA_STS_ACK; 102 s->status |= PARA_STS_ONLINE; 103 s->status |= PARA_STS_ERROR; 104 } 105 else if (val & PARA_CTR_SELECT) { 106 if (val & PARA_CTR_STROBE) { 107 s->status &= ~PARA_STS_BUSY; 108 if ((s->control & PARA_CTR_STROBE) == 0) 109 /* XXX this blocks entire thread. Rewrite to use 110 * qemu_chr_fe_write and background I/O callbacks */ 111 qemu_chr_fe_write_all(&s->chr, &s->dataw, 1); 112 } else { 113 if (s->control & PARA_CTR_INTEN) { 114 s->irq_pending = 1; 115 } 116 } 117 } 118 parallel_update_irq(s); 119 s->control = val; 120 break; 121 } 122 } 123 124 static void parallel_ioport_write_hw(void *opaque, uint32_t addr, uint32_t val) 125 { 126 ParallelState *s = opaque; 127 uint8_t parm = val; 128 int dir; 129 130 /* Sometimes programs do several writes for timing purposes on old 131 HW. Take care not to waste time on writes that do nothing. */ 132 133 s->last_read_offset = ~0U; 134 135 addr &= 7; 136 trace_parallel_ioport_write("HW", addr, val); 137 switch(addr) { 138 case PARA_REG_DATA: 139 if (s->dataw == val) 140 return; 141 pdebug("wd%02x\n", val); 142 qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_WRITE_DATA, &parm); 143 s->dataw = val; 144 break; 145 case PARA_REG_STS: 146 pdebug("ws%02x\n", val); 147 if (val & PARA_STS_TMOUT) 148 s->epp_timeout = 0; 149 break; 150 case PARA_REG_CTR: 151 val |= 0xc0; 152 if (s->control == val) 153 return; 154 pdebug("wc%02x\n", val); 155 156 if ((val & PARA_CTR_DIR) != (s->control & PARA_CTR_DIR)) { 157 if (val & PARA_CTR_DIR) { 158 dir = 1; 159 } else { 160 dir = 0; 161 } 162 qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_DATA_DIR, &dir); 163 parm &= ~PARA_CTR_DIR; 164 } 165 166 qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_WRITE_CONTROL, &parm); 167 s->control = val; 168 break; 169 case PARA_REG_EPP_ADDR: 170 if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) 171 /* Controls not correct for EPP address cycle, so do nothing */ 172 pdebug("wa%02x s\n", val); 173 else { 174 struct ParallelIOArg ioarg = { .buffer = &parm, .count = 1 }; 175 if (qemu_chr_fe_ioctl(&s->chr, 176 CHR_IOCTL_PP_EPP_WRITE_ADDR, &ioarg)) { 177 s->epp_timeout = 1; 178 pdebug("wa%02x t\n", val); 179 } 180 else 181 pdebug("wa%02x\n", val); 182 } 183 break; 184 case PARA_REG_EPP_DATA: 185 if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) 186 /* Controls not correct for EPP data cycle, so do nothing */ 187 pdebug("we%02x s\n", val); 188 else { 189 struct ParallelIOArg ioarg = { .buffer = &parm, .count = 1 }; 190 if (qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg)) { 191 s->epp_timeout = 1; 192 pdebug("we%02x t\n", val); 193 } 194 else 195 pdebug("we%02x\n", val); 196 } 197 break; 198 } 199 } 200 201 static void 202 parallel_ioport_eppdata_write_hw2(void *opaque, uint32_t addr, uint32_t val) 203 { 204 ParallelState *s = opaque; 205 uint16_t eppdata = cpu_to_le16(val); 206 int err; 207 struct ParallelIOArg ioarg = { 208 .buffer = &eppdata, .count = sizeof(eppdata) 209 }; 210 211 trace_parallel_ioport_write("EPP", addr, val); 212 if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) { 213 /* Controls not correct for EPP data cycle, so do nothing */ 214 pdebug("we%04x s\n", val); 215 return; 216 } 217 err = qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg); 218 if (err) { 219 s->epp_timeout = 1; 220 pdebug("we%04x t\n", val); 221 } 222 else 223 pdebug("we%04x\n", val); 224 } 225 226 static void 227 parallel_ioport_eppdata_write_hw4(void *opaque, uint32_t addr, uint32_t val) 228 { 229 ParallelState *s = opaque; 230 uint32_t eppdata = cpu_to_le32(val); 231 int err; 232 struct ParallelIOArg ioarg = { 233 .buffer = &eppdata, .count = sizeof(eppdata) 234 }; 235 236 trace_parallel_ioport_write("EPP", addr, val); 237 if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) { 238 /* Controls not correct for EPP data cycle, so do nothing */ 239 pdebug("we%08x s\n", val); 240 return; 241 } 242 err = qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg); 243 if (err) { 244 s->epp_timeout = 1; 245 pdebug("we%08x t\n", val); 246 } 247 else 248 pdebug("we%08x\n", val); 249 } 250 251 static uint32_t parallel_ioport_read_sw(void *opaque, uint32_t addr) 252 { 253 ParallelState *s = opaque; 254 uint32_t ret = 0xff; 255 256 addr &= 7; 257 switch(addr) { 258 case PARA_REG_DATA: 259 if (s->control & PARA_CTR_DIR) 260 ret = s->datar; 261 else 262 ret = s->dataw; 263 break; 264 case PARA_REG_STS: 265 ret = s->status; 266 s->irq_pending = 0; 267 if ((s->status & PARA_STS_BUSY) == 0 && (s->control & PARA_CTR_STROBE) == 0) { 268 /* XXX Fixme: wait 5 microseconds */ 269 if (s->status & PARA_STS_ACK) 270 s->status &= ~PARA_STS_ACK; 271 else { 272 /* XXX Fixme: wait 5 microseconds */ 273 s->status |= PARA_STS_ACK; 274 s->status |= PARA_STS_BUSY; 275 } 276 } 277 parallel_update_irq(s); 278 break; 279 case PARA_REG_CTR: 280 ret = s->control; 281 break; 282 } 283 trace_parallel_ioport_read("SW", addr, ret); 284 return ret; 285 } 286 287 static uint32_t parallel_ioport_read_hw(void *opaque, uint32_t addr) 288 { 289 ParallelState *s = opaque; 290 uint8_t ret = 0xff; 291 addr &= 7; 292 switch(addr) { 293 case PARA_REG_DATA: 294 qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_READ_DATA, &ret); 295 if (s->last_read_offset != addr || s->datar != ret) 296 pdebug("rd%02x\n", ret); 297 s->datar = ret; 298 break; 299 case PARA_REG_STS: 300 qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_READ_STATUS, &ret); 301 ret &= ~PARA_STS_TMOUT; 302 if (s->epp_timeout) 303 ret |= PARA_STS_TMOUT; 304 if (s->last_read_offset != addr || s->status != ret) 305 pdebug("rs%02x\n", ret); 306 s->status = ret; 307 break; 308 case PARA_REG_CTR: 309 /* s->control has some bits fixed to 1. It is zero only when 310 it has not been yet written to. */ 311 if (s->control == 0) { 312 qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_READ_CONTROL, &ret); 313 if (s->last_read_offset != addr) 314 pdebug("rc%02x\n", ret); 315 s->control = ret; 316 } 317 else { 318 ret = s->control; 319 if (s->last_read_offset != addr) 320 pdebug("rc%02x\n", ret); 321 } 322 break; 323 case PARA_REG_EPP_ADDR: 324 if ((s->control & (PARA_CTR_DIR | PARA_CTR_SIGNAL)) != 325 (PARA_CTR_DIR | PARA_CTR_INIT)) 326 /* Controls not correct for EPP addr cycle, so do nothing */ 327 pdebug("ra%02x s\n", ret); 328 else { 329 struct ParallelIOArg ioarg = { .buffer = &ret, .count = 1 }; 330 if (qemu_chr_fe_ioctl(&s->chr, 331 CHR_IOCTL_PP_EPP_READ_ADDR, &ioarg)) { 332 s->epp_timeout = 1; 333 pdebug("ra%02x t\n", ret); 334 } 335 else 336 pdebug("ra%02x\n", ret); 337 } 338 break; 339 case PARA_REG_EPP_DATA: 340 if ((s->control & (PARA_CTR_DIR | PARA_CTR_SIGNAL)) != 341 (PARA_CTR_DIR | PARA_CTR_INIT)) 342 /* Controls not correct for EPP data cycle, so do nothing */ 343 pdebug("re%02x s\n", ret); 344 else { 345 struct ParallelIOArg ioarg = { .buffer = &ret, .count = 1 }; 346 if (qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg)) { 347 s->epp_timeout = 1; 348 pdebug("re%02x t\n", ret); 349 } 350 else 351 pdebug("re%02x\n", ret); 352 } 353 break; 354 } 355 trace_parallel_ioport_read("HW", addr, ret); 356 s->last_read_offset = addr; 357 return ret; 358 } 359 360 static uint32_t 361 parallel_ioport_eppdata_read_hw2(void *opaque, uint32_t addr) 362 { 363 ParallelState *s = opaque; 364 uint32_t ret; 365 uint16_t eppdata = ~0; 366 int err; 367 struct ParallelIOArg ioarg = { 368 .buffer = &eppdata, .count = sizeof(eppdata) 369 }; 370 if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT)) { 371 /* Controls not correct for EPP data cycle, so do nothing */ 372 pdebug("re%04x s\n", eppdata); 373 return eppdata; 374 } 375 err = qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg); 376 ret = le16_to_cpu(eppdata); 377 378 if (err) { 379 s->epp_timeout = 1; 380 pdebug("re%04x t\n", ret); 381 } 382 else 383 pdebug("re%04x\n", ret); 384 trace_parallel_ioport_read("EPP", addr, ret); 385 return ret; 386 } 387 388 static uint32_t 389 parallel_ioport_eppdata_read_hw4(void *opaque, uint32_t addr) 390 { 391 ParallelState *s = opaque; 392 uint32_t ret; 393 uint32_t eppdata = ~0U; 394 int err; 395 struct ParallelIOArg ioarg = { 396 .buffer = &eppdata, .count = sizeof(eppdata) 397 }; 398 if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT)) { 399 /* Controls not correct for EPP data cycle, so do nothing */ 400 pdebug("re%08x s\n", eppdata); 401 return eppdata; 402 } 403 err = qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg); 404 ret = le32_to_cpu(eppdata); 405 406 if (err) { 407 s->epp_timeout = 1; 408 pdebug("re%08x t\n", ret); 409 } 410 else 411 pdebug("re%08x\n", ret); 412 trace_parallel_ioport_read("EPP", addr, ret); 413 return ret; 414 } 415 416 static void parallel_ioport_ecp_write(void *opaque, uint32_t addr, uint32_t val) 417 { 418 trace_parallel_ioport_write("ECP", addr & 7, val); 419 pdebug("wecp%d=%02x\n", addr & 7, val); 420 } 421 422 static uint32_t parallel_ioport_ecp_read(void *opaque, uint32_t addr) 423 { 424 uint8_t ret = 0xff; 425 426 trace_parallel_ioport_read("ECP", addr & 7, ret); 427 pdebug("recp%d:%02x\n", addr & 7, ret); 428 return ret; 429 } 430 431 static void parallel_reset(void *opaque) 432 { 433 ParallelState *s = opaque; 434 435 s->datar = ~0; 436 s->dataw = ~0; 437 s->status = PARA_STS_BUSY; 438 s->status |= PARA_STS_ACK; 439 s->status |= PARA_STS_ONLINE; 440 s->status |= PARA_STS_ERROR; 441 s->status |= PARA_STS_TMOUT; 442 s->control = PARA_CTR_SELECT; 443 s->control |= PARA_CTR_INIT; 444 s->control |= 0xc0; 445 s->irq_pending = 0; 446 s->hw_driver = 0; 447 s->epp_timeout = 0; 448 s->last_read_offset = ~0U; 449 } 450 451 static const int isa_parallel_io[MAX_PARALLEL_PORTS] = { 0x378, 0x278, 0x3bc }; 452 453 static const MemoryRegionPortio isa_parallel_portio_hw_list[] = { 454 { 0, 8, 1, 455 .read = parallel_ioport_read_hw, 456 .write = parallel_ioport_write_hw }, 457 { 4, 1, 2, 458 .read = parallel_ioport_eppdata_read_hw2, 459 .write = parallel_ioport_eppdata_write_hw2 }, 460 { 4, 1, 4, 461 .read = parallel_ioport_eppdata_read_hw4, 462 .write = parallel_ioport_eppdata_write_hw4 }, 463 { 0x400, 8, 1, 464 .read = parallel_ioport_ecp_read, 465 .write = parallel_ioport_ecp_write }, 466 PORTIO_END_OF_LIST(), 467 }; 468 469 static const MemoryRegionPortio isa_parallel_portio_sw_list[] = { 470 { 0, 8, 1, 471 .read = parallel_ioport_read_sw, 472 .write = parallel_ioport_write_sw }, 473 PORTIO_END_OF_LIST(), 474 }; 475 476 477 static const VMStateDescription vmstate_parallel_isa = { 478 .name = "parallel_isa", 479 .version_id = 1, 480 .minimum_version_id = 1, 481 .fields = (const VMStateField[]) { 482 VMSTATE_UINT8(state.dataw, ISAParallelState), 483 VMSTATE_UINT8(state.datar, ISAParallelState), 484 VMSTATE_UINT8(state.status, ISAParallelState), 485 VMSTATE_UINT8(state.control, ISAParallelState), 486 VMSTATE_INT32(state.irq_pending, ISAParallelState), 487 VMSTATE_INT32(state.epp_timeout, ISAParallelState), 488 VMSTATE_END_OF_LIST() 489 } 490 }; 491 492 static int parallel_can_receive(void *opaque) 493 { 494 return 1; 495 } 496 497 static void parallel_isa_realizefn(DeviceState *dev, Error **errp) 498 { 499 static int index; 500 ISADevice *isadev = ISA_DEVICE(dev); 501 ISAParallelState *isa = ISA_PARALLEL(dev); 502 ParallelState *s = &isa->state; 503 int base; 504 uint8_t dummy; 505 506 if (!qemu_chr_fe_backend_connected(&s->chr)) { 507 error_setg(errp, "Can't create parallel device, empty char device"); 508 return; 509 } 510 511 if (isa->index == -1) { 512 isa->index = index; 513 } 514 if (isa->index >= MAX_PARALLEL_PORTS) { 515 error_setg(errp, "Max. supported number of parallel ports is %d.", 516 MAX_PARALLEL_PORTS); 517 return; 518 } 519 if (isa->iobase == -1) { 520 isa->iobase = isa_parallel_io[isa->index]; 521 } 522 index++; 523 524 base = isa->iobase; 525 s->irq = isa_get_irq(isadev, isa->isairq); 526 qemu_register_reset(parallel_reset, s); 527 528 qemu_chr_fe_set_handlers(&s->chr, parallel_can_receive, NULL, 529 NULL, NULL, s, NULL, true); 530 if (qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_READ_STATUS, &dummy) == 0) { 531 s->hw_driver = 1; 532 s->status = dummy; 533 } 534 535 isa_register_portio_list(isadev, &isa->portio_list, base, 536 (s->hw_driver 537 ? &isa_parallel_portio_hw_list[0] 538 : &isa_parallel_portio_sw_list[0]), 539 s, "parallel"); 540 } 541 542 static void parallel_isa_build_aml(AcpiDevAmlIf *adev, Aml *scope) 543 { 544 ISAParallelState *isa = ISA_PARALLEL(adev); 545 Aml *dev; 546 Aml *crs; 547 548 crs = aml_resource_template(); 549 aml_append(crs, aml_io(AML_DECODE16, isa->iobase, isa->iobase, 0x08, 0x08)); 550 aml_append(crs, aml_irq_no_flags(isa->isairq)); 551 552 dev = aml_device("LPT%d", isa->index + 1); 553 aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0400"))); 554 aml_append(dev, aml_name_decl("_UID", aml_int(isa->index + 1))); 555 aml_append(dev, aml_name_decl("_STA", aml_int(0xf))); 556 aml_append(dev, aml_name_decl("_CRS", crs)); 557 558 aml_append(scope, dev); 559 } 560 561 /* Memory mapped interface */ 562 static uint64_t parallel_mm_readfn(void *opaque, hwaddr addr, unsigned size) 563 { 564 ParallelState *s = opaque; 565 566 return parallel_ioport_read_sw(s, addr >> s->it_shift) & 567 MAKE_64BIT_MASK(0, size * 8); 568 } 569 570 static void parallel_mm_writefn(void *opaque, hwaddr addr, 571 uint64_t value, unsigned size) 572 { 573 ParallelState *s = opaque; 574 575 parallel_ioport_write_sw(s, addr >> s->it_shift, 576 value & MAKE_64BIT_MASK(0, size * 8)); 577 } 578 579 static const MemoryRegionOps parallel_mm_ops = { 580 .read = parallel_mm_readfn, 581 .write = parallel_mm_writefn, 582 .valid.min_access_size = 1, 583 .valid.max_access_size = 4, 584 .endianness = DEVICE_NATIVE_ENDIAN, 585 }; 586 587 /* If fd is zero, it means that the parallel device uses the console */ 588 bool parallel_mm_init(MemoryRegion *address_space, 589 hwaddr base, int it_shift, qemu_irq irq, 590 Chardev *chr) 591 { 592 ParallelState *s; 593 594 s = g_new0(ParallelState, 1); 595 s->irq = irq; 596 qemu_chr_fe_init(&s->chr, chr, &error_abort); 597 s->it_shift = it_shift; 598 qemu_register_reset(parallel_reset, s); 599 600 memory_region_init_io(&s->iomem, NULL, ¶llel_mm_ops, s, 601 "parallel", 8 << it_shift); 602 memory_region_add_subregion(address_space, base, &s->iomem); 603 return true; 604 } 605 606 static Property parallel_isa_properties[] = { 607 DEFINE_PROP_UINT32("index", ISAParallelState, index, -1), 608 DEFINE_PROP_UINT32("iobase", ISAParallelState, iobase, -1), 609 DEFINE_PROP_UINT32("irq", ISAParallelState, isairq, 7), 610 DEFINE_PROP_CHR("chardev", ISAParallelState, state.chr), 611 DEFINE_PROP_END_OF_LIST(), 612 }; 613 614 static void parallel_isa_class_initfn(ObjectClass *klass, void *data) 615 { 616 DeviceClass *dc = DEVICE_CLASS(klass); 617 AcpiDevAmlIfClass *adevc = ACPI_DEV_AML_IF_CLASS(klass); 618 619 dc->realize = parallel_isa_realizefn; 620 dc->vmsd = &vmstate_parallel_isa; 621 adevc->build_dev_aml = parallel_isa_build_aml; 622 device_class_set_props(dc, parallel_isa_properties); 623 set_bit(DEVICE_CATEGORY_INPUT, dc->categories); 624 } 625 626 static const TypeInfo parallel_isa_info = { 627 .name = TYPE_ISA_PARALLEL, 628 .parent = TYPE_ISA_DEVICE, 629 .instance_size = sizeof(ISAParallelState), 630 .class_init = parallel_isa_class_initfn, 631 .interfaces = (InterfaceInfo[]) { 632 { TYPE_ACPI_DEV_AML_IF }, 633 { }, 634 }, 635 }; 636 637 static void parallel_register_types(void) 638 { 639 type_register_static(¶llel_isa_info); 640 } 641 642 type_init(parallel_register_types) 643