xref: /openbmc/qemu/hw/char/nrf51_uart.c (revision 2df1eb27)
1 /*
2  * nRF51 SoC UART emulation
3  *
4  * See nRF51 Series Reference Manual, "29 Universal Asynchronous
5  * Receiver/Transmitter" for hardware specifications:
6  * http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf
7  *
8  * Copyright (c) 2018 Julia Suvorova <jusual@mail.ru>
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License version 2 or
12  * (at your option) any later version.
13  */
14 
15 #include "qemu/osdep.h"
16 #include "qemu/log.h"
17 #include "qemu/module.h"
18 #include "hw/char/nrf51_uart.h"
19 #include "hw/irq.h"
20 #include "hw/qdev-properties.h"
21 #include "hw/qdev-properties-system.h"
22 #include "migration/vmstate.h"
23 #include "trace.h"
24 
25 static void nrf51_uart_update_irq(NRF51UARTState *s)
26 {
27     bool irq = false;
28 
29     irq |= (s->reg[R_UART_RXDRDY] &&
30             (s->reg[R_UART_INTEN] & R_UART_INTEN_RXDRDY_MASK));
31     irq |= (s->reg[R_UART_TXDRDY] &&
32             (s->reg[R_UART_INTEN] & R_UART_INTEN_TXDRDY_MASK));
33     irq |= (s->reg[R_UART_ERROR]  &&
34             (s->reg[R_UART_INTEN] & R_UART_INTEN_ERROR_MASK));
35     irq |= (s->reg[R_UART_RXTO]   &&
36             (s->reg[R_UART_INTEN] & R_UART_INTEN_RXTO_MASK));
37 
38     qemu_set_irq(s->irq, irq);
39 }
40 
41 static uint64_t uart_read(void *opaque, hwaddr addr, unsigned int size)
42 {
43     NRF51UARTState *s = NRF51_UART(opaque);
44     uint64_t r;
45 
46     if (!s->enabled) {
47         return 0;
48     }
49 
50     switch (addr) {
51     case A_UART_RXD:
52         r = s->rx_fifo[s->rx_fifo_pos];
53         if (s->rx_started && s->rx_fifo_len) {
54             s->rx_fifo_pos = (s->rx_fifo_pos + 1) % UART_FIFO_LENGTH;
55             s->rx_fifo_len--;
56             if (s->rx_fifo_len) {
57                 s->reg[R_UART_RXDRDY] = 1;
58                 nrf51_uart_update_irq(s);
59             }
60             qemu_chr_fe_accept_input(&s->chr);
61         }
62         break;
63     case A_UART_INTENSET:
64     case A_UART_INTENCLR:
65     case A_UART_INTEN:
66         r = s->reg[R_UART_INTEN];
67         break;
68     default:
69         r = s->reg[addr / 4];
70         break;
71     }
72 
73     trace_nrf51_uart_read(addr, r, size);
74 
75     return r;
76 }
77 
78 static gboolean uart_transmit(void *do_not_use, GIOCondition cond, void *opaque)
79 {
80     NRF51UARTState *s = NRF51_UART(opaque);
81     int r;
82     uint8_t c = s->reg[R_UART_TXD];
83 
84     s->watch_tag = 0;
85 
86     r = qemu_chr_fe_write(&s->chr, &c, 1);
87     if (r <= 0) {
88         s->watch_tag = qemu_chr_fe_add_watch(&s->chr, G_IO_OUT | G_IO_HUP,
89                                              uart_transmit, s);
90         if (!s->watch_tag) {
91             /* The hardware has no transmit error reporting,
92              * so silently drop the byte
93              */
94             goto buffer_drained;
95         }
96         return G_SOURCE_REMOVE;
97     }
98 
99 buffer_drained:
100     s->reg[R_UART_TXDRDY] = 1;
101     s->pending_tx_byte = false;
102     return G_SOURCE_REMOVE;
103 }
104 
105 static void uart_cancel_transmit(NRF51UARTState *s)
106 {
107     if (s->watch_tag) {
108         g_source_remove(s->watch_tag);
109         s->watch_tag = 0;
110     }
111 }
112 
113 static void uart_write(void *opaque, hwaddr addr,
114                        uint64_t value, unsigned int size)
115 {
116     NRF51UARTState *s = NRF51_UART(opaque);
117 
118     trace_nrf51_uart_write(addr, value, size);
119 
120     if (!s->enabled && (addr != A_UART_ENABLE)) {
121         return;
122     }
123 
124     switch (addr) {
125     case A_UART_TXD:
126         if (!s->pending_tx_byte && s->tx_started) {
127             s->reg[R_UART_TXD] = value;
128             s->pending_tx_byte = true;
129             uart_transmit(NULL, G_IO_OUT, s);
130         }
131         break;
132     case A_UART_INTEN:
133         s->reg[R_UART_INTEN] = value;
134         break;
135     case A_UART_INTENSET:
136         s->reg[R_UART_INTEN] |= value;
137         break;
138     case A_UART_INTENCLR:
139         s->reg[R_UART_INTEN] &= ~value;
140         break;
141     case A_UART_TXDRDY ... A_UART_RXTO:
142         s->reg[addr / 4] = value;
143         break;
144     case A_UART_ERRORSRC:
145         s->reg[addr / 4] &= ~value;
146         break;
147     case A_UART_RXD:
148         break;
149     case A_UART_RXDRDY:
150         if (value == 0) {
151             s->reg[R_UART_RXDRDY] = 0;
152         }
153         break;
154     case A_UART_STARTTX:
155         if (value == 1) {
156             s->tx_started = true;
157         }
158         break;
159     case A_UART_STARTRX:
160         if (value == 1) {
161             s->rx_started = true;
162         }
163         break;
164     case A_UART_ENABLE:
165         if (value) {
166             if (value == 4) {
167                 s->enabled = true;
168             }
169             break;
170         }
171         s->enabled = false;
172         value = 1;
173         /* fall through */
174     case A_UART_SUSPEND:
175     case A_UART_STOPTX:
176         if (value == 1) {
177             s->tx_started = false;
178         }
179         /* fall through */
180     case A_UART_STOPRX:
181         if (addr != A_UART_STOPTX && value == 1) {
182             s->rx_started = false;
183             s->reg[R_UART_RXTO] = 1;
184         }
185         break;
186     default:
187         s->reg[addr / 4] = value;
188         break;
189     }
190     nrf51_uart_update_irq(s);
191 }
192 
193 static const MemoryRegionOps uart_ops = {
194     .read =  uart_read,
195     .write = uart_write,
196     .endianness = DEVICE_LITTLE_ENDIAN,
197 };
198 
199 static void nrf51_uart_reset(DeviceState *dev)
200 {
201     NRF51UARTState *s = NRF51_UART(dev);
202 
203     s->pending_tx_byte = 0;
204 
205     uart_cancel_transmit(s);
206 
207     memset(s->reg, 0, sizeof(s->reg));
208 
209     s->reg[R_UART_PSELRTS] = 0xFFFFFFFF;
210     s->reg[R_UART_PSELTXD] = 0xFFFFFFFF;
211     s->reg[R_UART_PSELCTS] = 0xFFFFFFFF;
212     s->reg[R_UART_PSELRXD] = 0xFFFFFFFF;
213     s->reg[R_UART_BAUDRATE] = 0x4000000;
214 
215     s->rx_fifo_len = 0;
216     s->rx_fifo_pos = 0;
217     s->rx_started = false;
218     s->tx_started = false;
219     s->enabled = false;
220 }
221 
222 static void uart_receive(void *opaque, const uint8_t *buf, int size)
223 {
224 
225     NRF51UARTState *s = NRF51_UART(opaque);
226     int i;
227 
228     if (size == 0 || s->rx_fifo_len >= UART_FIFO_LENGTH) {
229         return;
230     }
231 
232     for (i = 0; i < size; i++) {
233         uint32_t pos = (s->rx_fifo_pos + s->rx_fifo_len) % UART_FIFO_LENGTH;
234         s->rx_fifo[pos] = buf[i];
235         s->rx_fifo_len++;
236     }
237 
238     s->reg[R_UART_RXDRDY] = 1;
239     nrf51_uart_update_irq(s);
240 }
241 
242 static int uart_can_receive(void *opaque)
243 {
244     NRF51UARTState *s = NRF51_UART(opaque);
245 
246     return s->rx_started ? (UART_FIFO_LENGTH - s->rx_fifo_len) : 0;
247 }
248 
249 static void uart_event(void *opaque, QEMUChrEvent event)
250 {
251     NRF51UARTState *s = NRF51_UART(opaque);
252 
253     if (event == CHR_EVENT_BREAK) {
254         s->reg[R_UART_ERRORSRC] |= 3;
255         s->reg[R_UART_ERROR] = 1;
256         nrf51_uart_update_irq(s);
257     }
258 }
259 
260 static void nrf51_uart_realize(DeviceState *dev, Error **errp)
261 {
262     NRF51UARTState *s = NRF51_UART(dev);
263 
264     qemu_chr_fe_set_handlers(&s->chr, uart_can_receive, uart_receive,
265                              uart_event, NULL, s, NULL, true);
266 }
267 
268 static void nrf51_uart_init(Object *obj)
269 {
270     NRF51UARTState *s = NRF51_UART(obj);
271     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
272 
273     memory_region_init_io(&s->iomem, obj, &uart_ops, s,
274                           "nrf51_soc.uart", UART_SIZE);
275     sysbus_init_mmio(sbd, &s->iomem);
276     sysbus_init_irq(sbd, &s->irq);
277 }
278 
279 static int nrf51_uart_post_load(void *opaque, int version_id)
280 {
281     NRF51UARTState *s = NRF51_UART(opaque);
282 
283     if (s->pending_tx_byte) {
284         s->watch_tag = qemu_chr_fe_add_watch(&s->chr, G_IO_OUT | G_IO_HUP,
285                                              uart_transmit, s);
286     }
287 
288     return 0;
289 }
290 
291 static const VMStateDescription nrf51_uart_vmstate = {
292     .name = "nrf51_soc.uart",
293     .post_load = nrf51_uart_post_load,
294     .fields = (const VMStateField[]) {
295         VMSTATE_UINT32_ARRAY(reg, NRF51UARTState, 0x56C),
296         VMSTATE_UINT8_ARRAY(rx_fifo, NRF51UARTState, UART_FIFO_LENGTH),
297         VMSTATE_UINT32(rx_fifo_pos, NRF51UARTState),
298         VMSTATE_UINT32(rx_fifo_len, NRF51UARTState),
299         VMSTATE_BOOL(rx_started, NRF51UARTState),
300         VMSTATE_BOOL(tx_started, NRF51UARTState),
301         VMSTATE_BOOL(pending_tx_byte, NRF51UARTState),
302         VMSTATE_BOOL(enabled, NRF51UARTState),
303         VMSTATE_END_OF_LIST()
304     }
305 };
306 
307 static Property nrf51_uart_properties[] = {
308     DEFINE_PROP_CHR("chardev", NRF51UARTState, chr),
309     DEFINE_PROP_END_OF_LIST(),
310 };
311 
312 static void nrf51_uart_class_init(ObjectClass *klass, void *data)
313 {
314     DeviceClass *dc = DEVICE_CLASS(klass);
315 
316     dc->reset = nrf51_uart_reset;
317     dc->realize = nrf51_uart_realize;
318     device_class_set_props(dc, nrf51_uart_properties);
319     dc->vmsd = &nrf51_uart_vmstate;
320 }
321 
322 static const TypeInfo nrf51_uart_info = {
323     .name = TYPE_NRF51_UART,
324     .parent = TYPE_SYS_BUS_DEVICE,
325     .instance_size = sizeof(NRF51UARTState),
326     .instance_init = nrf51_uart_init,
327     .class_init = nrf51_uart_class_init
328 };
329 
330 static void nrf51_uart_register_types(void)
331 {
332     type_register_static(&nrf51_uart_info);
333 }
334 
335 type_init(nrf51_uart_register_types)
336